k o l b eC - Hass Wholesalehasswholesale.com/PDF_6_12/K-K_brochure_Classic.pdf Glass options DiviDeD...

See the Difference Quality Makes®

k o l b eCl a s s i C se r i e s Pr o d u C t Cata l o g

� ClassiC series

�www.kolbe-kolbe.com

The Classic Series is Kolbe’s line of roll-formed aluminum clad

wood windows. This series features simple, uncomplicated lines to

complement any style of design.

Create a grand entrance with an outswing door and sidelites with

custom grilles. Brighten a design with curves from a full circle, half-

circle or elliptical radius window. Kolbe® products are made with

utmost care and attention to detail in mind.

Kolbe is committed to designing and constructing the highest quality windows and doors possible, while

utilizing our natural resources in a safe and efficient way. Most of our products contain some recycled

materials, while we find ways to reuse and recycle items within our company. By using our products with

other eco-friendly materials, they in turn can help lead to a greener home or business.

By associating with NFRC, Window and Door Manufacturers Association Hallmark Certification

Program and the Energy Star Program, Kolbe products are built to meet the diverse and expanding needs

of residential and commercial fields. Such tests measure air and water infiltration, structural performance

and energy efficiency. Rest assured that Kolbe products are tested in an unbiased manner by independent

laboratories and that test data is available to the public. (See Technical Data section on pg. 101.)

C l a s s i C s e r i e s O v e rv i e w

�

� ClassiC series

C l a s s i C s e r i e s F e at u r e s a t a G l a n C e

Casements & Awnings

Traditional Double Hungs

Double & Triple Sliders

Rectangular Transoms

Radius Windows

Geometric Windows

Viewport Sliding Patio Doors

Garden-Aire Sliding Patio Doors

Inswing Patio Doors

Inswing Entrance Doors

Outswing Entrance Doors

S O O O S O O

S O O O S O O

S O O O S O O

S O O O S O O

N/A* O O O S O O

S O O O S O O

S O O O S O S

S O O O S O S

S O O O S O S

S O O O S O S

S O O O S O S

Rol

l-for

med

Alu

min

um C

ladd

ing

Gril

les-

in-t

he-A

irspa

ce

Woo

d R

emov

able

Gril

les

Per

form

ance

Div

ided

Lite

s (P

DL)

H°K

LoE

2 -

270

exterior Finish

H°K

LoE

2 -

240

or L

oE3 -

366

S = standard

O = option

N/A = not available

Tem

pere

d G

lass

* Note: Radius windows use extruded aluminum cladding instead of the roll-formed aluminum cladding.

DiviDeD lites Glass

�www.kolbe-kolbe.com

Glass options

DiviDeD lite options

Finish options

other options & aCCessories

Casements

awninGs

Double hunGs

sliDers

patio Doors

entranCe Doors

Complementary

teChniCal Data

Co

nt

en

ts

6

7

8

9

11

39

47

59

63

75

89

101

table oF

Contents

This catalog is intended to show options available. Pricing within standard and custom options may vary. Please contact a Kolbe dealer for details.

� ClassiC series

H˚K LoE²-270

H˚K LoE³-366

Laminated IG

H°K LoE²-240

86%95%

99%

UV BLOCKAGE

84%

G l a s s O p t i O n s

tempereD

Safety standard in Kolbe doors. Essential to meet some

building requirements.

laminateD

Provides the ultimate in UV blockage.

(See illustration above)

h°K loe2 - 240

A tinted glass recommended for warm climates that

achieves solar control over a wide range of the

spectrum, while also helping to reduce glare.

H°K LoE� -��

Recommended for all climates, with maximum protection

against heat loss and UV damage.

bronze or Gray tinteD

Provides shading to interiors.

patterneD or ColoreD

Creates visual interest to any window or door. Also provides

privacy to rooms.

preserve

Preserve film is available on windows and doors to help keep

the glass clean and debris free. The film is applied to the

interior and exterior of the unit, protecting it through travel,

installation and in field finishing. Any mess stays on the film,

which is easily removed once the job is completed.

NOTES:LoE�, LoE�-�70, LoE� -��0, LoE�-�� and Preserve are trademarks of Cardinal IG.

H°K insulating glass carries a �0-year warranty. Not all glass options listed have the same glass warranty. Please contact your supplier for details.

G l a s s O p t i O n s

H ° K G l a s s : s u p e r i O r a s s ta n d a r d

Kolbe believes that quality is in the details. That is why we insist

on using a glazing system to achieve optimum energy efficiency of the

overall window unit. We use double-strength annealed glass in most

units, with double-pane insulating H°K LoE�-�70 glass as standard. We

also offer glass options that are common to the industry, as well as meet

many specialized glass requests.

H°K glass has LoE�, “smart” coating that reduces energy transfer

through the insulating glass unit. The performance of LoE� glass is

achieved through a sputter coating process. The coating achieves one

of the highest levels of energy performance possible. This process is

also environmentally sound. It creates no emissions or residues. In

summer, LoE� glass allows visible sunlight in while blocking 9�% of the

sun’s infrared heat energy, while in winter LoE� glass reflects roomside

heat back into the room. The result is significant savings in heating

and cooling costs throughout the year. LoE� glass also selectively

filters out 8�% of the sun’s harmful ultraviolet rays, which provides

protection against the fading of furniture, fabrics and carpeting.

To further boost energy efficiency, H°K glass is filled with argon

gas. This natural, existing gas is colorless, odorless, non-toxic,

non-corrosive and non-flammable. Its thermal conductivity is �0%

lower than that of air. Together, the LoE� coating and argon gas result

in a �1% improvement in U-factors and a 10�% improvement in

R-values, as compared to air-filled insulating glass without LoE�.

What’s more, because units with argon are assembled in vacuum

chambers, they do not require unsightly plugs in the spacer bars.

To maintain the integrity of the product, units to be installed in or

shipped through high altitude areas may not include argon gas.

H°K glass is complemented by a state-of-the-art, stainless steel

spacer bar system on most units. These Thermo-Edge units achieve low

heat conductance throughout the edge seal design. The primary seal

of the dual-seal construction is compressed polyisobutylene, while the

secondary seal is silicone. In addition, desiccants are enclosed within

the stainless steel spacer to absorb moisture and the spacer corners

are bent to be air/gas tight. This improves the overall U-factor of the

window and can reduce the potential for condensation by increasing

the roomside glass temperature at the frame/glass interface.

Thermo-Edge spacers are one of the many quality details that define

Kolbe windows and doors.

NOTE: Tested units include argon. The laminate has 1/�" inner pane. Based on Lawrence Berkeley Lab (LBL) Window �.� © �00� analysis for classical UV transmission data.

7www.kolbe-kolbe.com

d i v i d e d l i t e O p t i O n s

G r i l l e s - i n - t H e - a i r s p a C e

w O O d r e m O va b l e G r i l l e s

Wood grilles are built with a full surround frame and bars that interlock at the joints for stability.

Grilles are applied to the interior of the window using an exclusive hidden clip system*. This system

makes unsightly pins and attachment points unnecessary and removal or replacement easy. Grille

bars are profiled on the interior like traditional grilles with detailed grooves on the exterior for subtle

depth and richness. As standard, bars are constructed of unfinished pine and are 7/8" wide on windows

and 1-1/8" wide on doors. Custom grille patterns, bar widths, wood species and interior stains may

be available upon request.* A clear pin system will be used for Garden-Aire sliding patio doors, and grilles will not have accent lines on the bar exterior.

Grilles-in-the-airspace are constructed with aluminum bars sealed between two panes of H°K

insulating glass, offering the look of divided panes while reducing cleaning time. For units with

7/8" insulating glass, contoured, �/�" wide bars are standard in White, Beige, Sand, Rustic, Hartford

Green and Chutney. Optional colors are light wood and dark wood faux finishes. Flat, �/8" wide

grille bars are also available in White, Beige, Sand, Rustic, Hartford Green, Chutney, light wood and

dark wood faux finishes and Brass. Two-tone contour or flat grilles are available with either light or

dark wood faux finishes to the interior and White to the exterior. Also available for 7/8" insulating

glass are �/1�" wide brass “pencil” bars.

contour bars

flat bars & brass “pencil” bar

p e r F O r m a n C e d i v i d e d l i t e s

Kolbe’s performance divided lite (PDL) glazing system gives the appearance of true divided lites

without sacrificing energy efficiency. A single, H°K insulating glass unit is used, while aesthetically

pleasing spacer bars are installed within the insulating glass unit. Extruded aluminum bars are adhered

to the exterior of the glass and unfinished pine bars are adhered to the interior of the glass.* Together,

these bars create the illusion of true divided lites. PDL bars are available in �/8", 7/8", 1-1/8",

1-�/�" or �-1/�" bar widths. The exterior finish of the aluminum bars will match the exterior finish on

the unit. Variations on the PDL option may include custom grille patterns, bar widths or no spacer bars.

* Some intricate radius designs may have a composite material for the exterior PDL bar.

8 ClassiC series

a l u m i n u m C l a d d i n G

Classic Series clad products are coated with a polyester finish that is baked to

cure and harden on the aluminum surface. This helps the finish resist marring and

fading, while increasing weatherability. The polyester finish carries a �0-year warranty

against cracking, checking and peeling. Classic Series clad windows and doors are

available in five standard colors.

F i n i s H O p t i O n s

White Beige Sand

Rustic Hartford Green

p O ly e s t e r F i n i s H e s

i n t e r i O r p r e F i n i s H i n G

Kolbe windows and doors are unfinished as standard.

Interior prefinishing is offered with two coats of a

water-based, acrylic type white paint. All windows

and Garden-Aire sliding patio doors will be coated

with latex primer. Inswing and outswing doors will

be coated with a high performance urethane primer. (Primer

is not available on grilles.)

i n t e r i O r w O O d O p t i O n s

In addition to the standard pine, Kolbe offers other optional

wood species to enhance the look of a window or door unit.

The wood species available are mahogany, oak, fir, alder,

walnut, maple and cherry. Contact your Kolbe dealer for

more details.

C O p p e r C l a d d i n G

Enhance the aesthetic appeal of your windows and doors

with copper cladding. Over time you will discover the

hidden beauty when it develops a natural patina.


O v O l O G l a z i n G b e a d s & m u n t i n b a r s

As standard, glazing beads have a beveled profile, but may also

be ordered with an ovolo profile. To complement ovolo glazing

beads, ovolo muntin bars are available on units with PDL and

removable wood grilles. Units ordered with PDL will have

ovolo muntin bars on the interior and beveled muntin bars on

the exterior. (See grille cross section drawings on pgs 98-99.)

O t H e r O p t i O n s & a C C e s s O r i e s

i n t e r i O r C a s i n G

Accent the interior of windows and

doors with interior casing by Kolbe.

As standard, choose either �-1/8"

wide ranch casing or �-1/�" wide colonial casing. Ranch and

colonial casing are available in unfinished pine or oak, ready

for paint or stain. Curved radius casing is available as well, to

match the curves of Kolbe radius units.

Specialty mouldings are available in pine, oak and other

wood species. Shipped loose for field application, specialty

mouldings are available in a wide variety of profiles.

Ranch Colonial

s t O r m G u a r d

Kolbe’s durable StormGuard combination storm/screen

units provide extra protection from the elements. Units

feature two glass inserts and one screen insert that can

be removed from the interior for cleaning. Frames are

constructed of extruded aluminum made of a lightweight

alloy, which is easy to handle without sacrificing

performance. Weatherstripping along the top and sides

of all three inserts ensures a tight fit that will withstand

harsh weather. Weep holes channel water out to help

prevent damage to the window sill. The sight lines and

profile of StormGuard units closely match the window it

complements, which means the unit will blend in and your

view will not be obscured. Screen inserts have fiberglass

mesh as standard; aluminum mesh is optional. StormGuards

for Classic Series windows are available in White, Beige,

Sand, Rustic and Hartford Green.

Double Hung StormGuard

in White

Slider StormGuard

in Beige

s w i n G i n G s C r e e n d O O r s

Swinging screen doors are available

for field installation with Kolbe single

and double inswing doors. Screen

doors feature an adjustable self-closing

mechanism. Double swinging screen

doors are equipped with spring-loaded

locking mechanisms on the head and

sill of the passive door. Energy efficiency

is provided by weatherstripping around the frame perimeter

and on the astragal of double screen doors; rubber door sweeps

meet the sill.

Beveled Profile

Ovolo Profile

Wood Removable Grilles

10 ClassiC series�8 Kolbe winDows & Doors

CasementsCasements

stuDio & transom units piCture Combination units bow & bay units


Gl a s s:➢ H°KLoE2-240*

➢ H°KLoE3-366*➢ Patterned-,bronze-orgray-lite➢ Temperedorlaminated➢ Otheroptionsstandardtotheindustry

Gr i l l e s :➢ Grilles-in-the-airspace➢ Interiorremovablewoodgrilleswith7/8"or1-1/8"barsand fullsurrounds➢ PDLwith5/8",7/8",1-1/8",1-3/4"or2-1/4"bars

Ot h e r Op t i O n s: (notalloptionsareavailableonallcasementtypes)

➢ Otherwoodspecies➢ Ovoloprofileglazingbeadsandinteriorgrillebars➢ Interiorprefinishing➢ Interiorcasing

➢ Prepforstool➢ Hardware,multi-pointlocksandoperatorcoversinWhite, Beige,Brassandcustomfinisheslistedabove➢ Single-armoperatorswithEurohinges(meetsemergencyescape

andrescuerequirementsonsome“L”Seriescasements)

➢ ScreenswithWhite,Beige,orBrassframes(Brassframesarenot

availableonradiustopunits)

➢ Screenswithaluminumorcharcoal-coloredaluminummesh (excludingbrassframes)

➢ Woodwrappedscreens(notavailableonradiustopunits)

➢ Extensionjambs(upto12"applied,over12"shippedloosefor

fieldapplication)

➢ Bowandbayoptions:insulatedplatforms,supportbracketsand oak-veneeredheadandseatboards

C a s e m e n t O p t i O n a l F e at u r e s

NOTES:

Allmeasurementsarenominal.

*Argongasmaynotbeincludedwithunitstobeinstalledinorshippedthroughhighaltitudeareas.

h a r d wa r e

Clay-colored, folding handles are applied to casement units as standard.

Standardcasementhandlesarealsoavailable inWhite,BeigeandBrass.

Custom finishes include Antique Brass, Satin Nickel, Antique Nickel,

MatteBlack,Oil-rubbedandRusticUmber.Multi-pointlockhandleswill

matchoperatorhandlecolors.

C l a s s i C s e r i e s C a s e m e n t s

C a s e m e n t s ta n d a r d F e at u r e s

➢ 1-3/4"thicksash

➢ Overalljambwidthis4-9/16"(basicboxwidthis2-7/16",

plusextensions)

➢ Constructedofpine,withpineinteriorstopsandwoodmull

casingsonmulledunits

➢ Prefinished,heavygaugeroll-formedaluminumcladding

➢ 7/8"H°KLoE2-270insulatingglass*

➢ Glazedtotheinteriorwithwoodglazingbeads

➢ Allexteriorwoodpartsarepreservative-treated

➢ Fullyweatherstrippedforatightseal

➢ InteriorscreenswithClay-coloredaluminumframesand

charcoal-coloredfiberglassmesh

➢ Clay-coloredfoldinghandles,operatorcoversand

multi-pointlocks

➢ Dual-armoperatorswithconcealed,adjustablehinges

(single-armoperatorswithconcealed,adjustablehingeson“S”Series

casements;single-armoperatorswithEurohingesforaddedsupporton

segmentheadandhalf-circletopunit)

➢ Stainlesssteelexterioroperatorparts

➢ Heavyvinylnailingfin

➢ Pine-veneeredheadandseatboards;unique,narrow

mullionsandcablesupportsystemonbowandbayunits

Vinylnailingfinappliedasstandard

foldinghandleinClay(closed)

foldinghandleinClay(open)

1� ClassiC series

1'-8"1'-8 1/2"15 1/4"

N12

N13

N14

N15

N16

N156

N146

N136

N126

2'-6"2'-6 1/2"25 1/4"

X12

X13

X14*

X15*

X16*

X156*

X146*

X136

X126

3'-0"3'-0 1/2"31 1/4"

E13

E14*

E15*

E16*

E156*

E146*

E136*

Casements - single units

L12

L126

L13

L136

T14

L146

L15

L156

L16

2'-4"2'-4 1/2"23 1/4"

1'-4"1'-4 1/2"11 1/4"

F.s.r.o.

G.s.

S12

S13

S14

S15

S16

S156

S146

S136

S126

2'-0

"2'

-0 1

/2"

19 1

/4"

2'-6

"2'

-6 1

/2"

25 1

/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

2'-0"2'-0 1/2"19 1/4"

W12

W13

W14

W15

W16

W156

W146

W136

W126


C a s e m e n t s s i n G l e u n i t s

NOTES:

All measurements are nominal. Elevation charts are not to scale.

Grilles are optional. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/�" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 101.

* Units meet most national emergency escape and rescue requirements.

PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KCE1�). Specify stationary, left or right venting when ordering single units. Venting is viewed from the window exterior.

F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size

D i m e n s i o n C a l C u l a t i o n s

F.S. to Sash O.S.M. -1 1�/1�" -1 1�/1�"Sash O.S.M. to G.S. -� 1�/1�" -� 1�/1�"G.S. to D.L.O. -1" -1"G.S. to Screen O.S.M. +1 9/1�" +1/�"note: Clear opening dimensions can be found on pg. 101.

F.S. = Frame Size • G.S. = Glass Size • O.S.M. = Outside MeasurementD.L.O. = Daylight Opening

wiDth heiGht

1�www.kolbe-kolbe.com


1'-4"1'-4 1/2"11 1/4"

F.s.r.o.

G.s.

S12 S22 S32 S42 S52

S13 S23 S33 S43 S53

S14 S24 S34 S44 S54

S15 S25 S35 S45 S55

S16 S26 S36 S46 S56

S156 S256 S356 S456 S556

S146 S246 S346 S446 S546

S136 S236 S336 S436 S536

S126 S226 S326 S426 S526

2'-8"2'-8 1/2"11 1/4"

4'-0"4'-0 1/2"11 1/4"

5'-4"5'-4 1/2"11 1/4"

6'-8"6'-8 1/2"11 1/4"

2'-0

"2'

-0 1

/2"

19 1

/4"

2'-6

"2'

-6 1

/2"

25 1

/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

Casements - “s” seriesC a s e m e n t s “ s ” s e r i e s

NOTES:


Grilles are optional. The grille configurations shown for single sash are typical for each sash of mulled units.

Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/�" on all sides and still be within good practice guidelines.

For rough opening recommendations, see pg. 101.

PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KCS��). Specify stationary, left or right venting when ordering single units. Venting is viewed from the window exterior.

F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash.)

1� ClassiC series

F.s.r.o.

G.s.

2'-0

"2'

-0 1

/2"

19 1

/4"

2'-6

"2'

-6 1

/2"

25 1

/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

1'-8"1'-8 1/2"15 1/4"

N12 N22 N32 N42 N52

N13 N23 N33 N43 N53

N14 N24 N34 N44 N54

N15 N25 N35 N45 N55

N16 N26 N36 N46 N56

N156 N256 N356 N456 N556

N146 N246 N346 N446 N546

N136 N236 N336 N436 N536

N126 N226 N326 N426 N526

3'-4"3'-4 1/2"15 1/4"

5'-0"5'-0 1/2"15 1/4"

6'-8"6'-8 1/2"15 1/4"

8'-4"8'-4 1/2"15 1/4"

Casements - “n” series


C a s e m e n t s “ n ” s e r i e s

NOTES:



Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/�" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 101.

PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KCN��). Specify stationary, left or right venting when ordering single units. Venting is viewed from the window exterior.




F.s.r.o.

G.s.

2'-0

"2'

-0 1

/2"

19 1

/4"

2'-6

"2'

-6 1

/2"

25 1

/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

2'-0"2'-0 1/2"19 1/4"

W12 W22 W32 W42 W52

W13 W23 W33 W43 W53

W14 W24 W34 W44 W54

W15 W25 W35 W45 W55

W16 W26 W36 W46 W56

W156 W256 W356 W456 W556

W146 W246 W346 W446 W546

W136 W236 W336 W436 W536

W126 W226 W326 W426 W526

4'-0"4'-0 1/2"19 1/4"

6'-0"6'-0 1/2"19 1/4"

8'-0"8'-0 1/2"19 1/4"

10'-0"10'-0 1/2"

19 1/4"

W62

W63

W64

W65

W66

W656

W646

W636

W626

12'-0"12'-0 1/2"

19 1/4"

Casements - “W” seriesC a s e m e n t s “ w ” s e r i e s

NOTES:




PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KCW��). Specify stationary, left or right venting when ordering single units. Venting is viewed from the window exterior.


1� ClassiC series


C a s e m e n t s “ l ” s e r i e s

F.s.r.o.

G.s.

2'-0

"2'

-0 1

/2"

19 1

/4"

2'-6

"2'

-6 1

/2"

25 1

/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

2'-4"2'-4 1/2"23 1/4"

4'-8"4'-8 1/2"23 1/4"

7'-0"7'-0 1/2"23 1/4"

9'-4"9'-4 1/2"23 1/4"

11'-8"11'-8 1/2"

23 1/4"

14'-0"14'-0 1/2"

23 1/4"

Casements - “l” series

L12

L126

L13

L136

L14*

L146*

L15*

L156*

L16* L26*

L256*

L25*

L246*

L24*

L236

L23

L226

L22 L32

L326

L33

L336

L34*

L346*

L35*

L356*

L36* L46*

L456*

L45*

L446*

L44*

L436

L43

L426

L42 L52

L526

L53

L536

L54*

L546*

L55*

L556*

L56* L66*

L656*

L65*

L646*

L64*

L636

L63

L626

L62

NOTES:




* Units meet most national emergency escape and rescue requirements when modified with single-arm operators and Euro hinges.

PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KCL��). Specify stationary, left or right venting when ordering single units. Venting is viewed from the window exterior.




F.s.r.o.

G.s.

2'-0

"2'

-0 1

/2"

19 1

/4"

2'-6

"2'

-6 1

/2"

25 1

/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

2'-6"2'-6 1/2"25 1/4"

X12 X22 X32 X42 X52

X13 X23 X33 X43 X53

X14* X24* X34* X44* X54*

X15* X25* X35* X45* X55*

X16* X26* X36* X46* X56*

X156* X256* X356* X456* X556*

X146* X246* X346* X446* X546*

X136 X236 X336 X436 X536

X126 X226 X326 X426 X526

5'-0"5'-0 1/2"25 1/4"

7'-6"7'-6 1/2"25 1/4"

10'-0"10'-0 1/2"

25 1/4"

12'-6"12'-6 1/2"

25 1/4"

Casements - “X” seriesC a s e m e n t s “ X ” s e r i e s

NOTES:






PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KCX��). Specify stationary, left or right venting when ordering single units. Venting is viewed from the window exterior.


18 ClassiC series

F.s.r.o.

G.s.

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

3'-0"3'-0 1/2"31 1/4"

E13 E23 E33

E14* E24* E34*

E15* E25* E35*

E16* E26* E36*

E156* E256* E356*

E146* E246* E346*

E136* E236* E336*

6'-0"6'-0 1/2"31 1/4"

9'-0"9'-0 1/2"31 1/4"

Casements - “e” series


C a s e m e n t s “ e ” s e r i e s

NOTES:





PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KCE��). Specify stationary, left or right venting when ordering single units. Venting is viewed from the window exterior.




1'-8"1'-8 1/2"15 1/4"

2'-6"2'-6 1/2"25 1/4"

N12S

N126S

X12S

X126S

N114S X114S S214S

S218S

S22S

S226S

N118S X118S

2'-8"2'-8 1/2"27 1/4"

3'-0"3'-0 1/2"31 1/4"

Casements - Rectangular transoms & studio units

3'-4"3'-4 1/2"35 1/4"

N214P W214P 4614P N314P W314P

N22P W22P 4620P N32P W32P

N226P W226P 4626P N326P W326P

N218P W218P 4618P N318P W318P

4'-0"4'-0 1/2"43 1/4"

4'-6"4'-6 1/2"49 1/4"

5'-0"5'-0 1/2"55 1/4"

6'-0"6'-0 1/2"67 1/4"

E114S

E126S

E12S

E118S

1'-4"1'-4 1/2"11 1/4"

F.s.r.o.

G.s.

1'-4

"1'

-4 1

/2"

11 1

/4"

1'-8

"1'

-8 1

/2"

15 1

/4"

2'-0"2'-0 1/2"19 1/4"

S12S

S114S

S126S

2'-0

"2'

-0 1

/2"

19 1

/4"

2'-6

"2'

-6 1

/2"

25 1

/4"

W12S

W126S

W114S

S118S W118S

N23P W23P 4630P N33P W33P

N24P W24P 4640P N34P W34P

N246P W246P 4646P N346P W346P

N25P W25P 4650P N35P W35P

N256P W256P 4656P N356P W356P

N26P W26P 4660P N36P W36P

N236P W236P 4636P N336P W336P

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

C a s e m e n t s r e C ta n G u l a r t r a n s O m s & s t u d i O u n i t s

NOTES:


The units shown are stand-alone units. Adjustments may be required when stacking over other units; adjustments will be made in the factory.

Grilles are optional. Follow chart down from top row and across from left column to determine grille configurations.



PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KCW��P).


�0 ClassiC series

F.s.r.o.

G.s.

French Casements

3'-0

"3'

-0 1

/2"

31 1

/8"

3'-6

"3'

-6 1

/2"

37 1

/8"

4'-0

"4'

-0 1

/2"

43 1

/8"

4'-6

"4'

-6 1

/2"

49 1

/8"

5'-0

"5'

-0 1

/2"

55 1

/8"

5'-6

"5'

-6 1

/2"

61 1

/8"

6'-0

"6'

-0 1

/2"

67 1

/8"

3'-4"3'-4 1/2"16 1/8"

N23 W23 X23

N24 W24 X24*

N25 W25 X25*

N26

N256

N246 W246 X246*

N236 W236 X236*

4'-0"4'-0 1/2"20 1/8"

5'-0"5'-0 1/2"26 1/8"

F r e n C H C a s e m e n t s

NOTES:





PRODUCT CODES:

To order units, add “FC” before the product number (Ex: FCN��).



�1www.kolbe-kolbe.com

Casements - “n” series Picture unit Combinations

F.s.r.o.

G.s.

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

N336PL N436P N436PL N536P







5'-0"5'-0 1/2"

15 1/4" | 35 1/4"

N336PR

N346PR

N356PR

N36PR

N35PR

N34PR

N33PR

5'-0"5'-0 1/2"

35 1/4" | 15 1/4"

6'-8"6'-8 1/2"

15 1/4" | 35 1/4"| 15 1/4"

6'-8"6'-8 1/2"

15 1/4" | 55 1/4"

8'-4"8'-4 1/2"

15 1/4" | 55 1/4"| 15 1/4"

N436PR

N446PR

N456PR

N46PR

N45PR

N44PR

N43PR

6'-8"6'-8 1/2"

55 1/4" | 15 1/4"


C a s e m e n t s “ n ” s e r i e s p i C t u r e u n i t C O m b i n at i O n s

NOTES:


Venting is viewed from the exterior.



PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KCN��P).


�� ClassiC series

W336PL

W346PL

W356PL

W36PL

W35PL

W34PL

W33PL

W436P

W446P

W456P

W46P

W45P

W44P

W43P

W436PL

W446PL

W456PL

W46PL

W45PL

W44PL

W43PL

W536P

W55P

W556P

W56P

W54P

W53P

W546P

W336PR

W346PR

W356PR

W36PR

W35PR

W34PR

W33PR

W436PR

W446PR

W456PR

W46PR

W45PR

W44PR

W43PR

Casements - “W” series Picture unit Combinations

F.s.r.o.

G.s.

6'-0"6'-0 1/2"

19 1/4" | 43 1/4"

6'-0"6'-0 1/2"

43 1/4" | 19 1/4"

8'-0"8'-0 1/2"

19 1/4" | 43 1/4"| 19 1/4"

8'-0"8'-0 1/2"

19 1/4" | 67 1/4"

10'-0"10'-0 1/2"

19 1/4" | 67 1/4" | 19 1/4"

8'-0"8'-0 1/2"

67 1/4" | 19 1/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

C a s e m e n t s “ w ” s e r i e s p i C t u r e u n i t C O m b i n at i O n s

NOTES:


Venting is viewed from the exterior.




PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KCW��P).



��www.kolbe-kolbe.com

U.d.r.o.

G.s.

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

UNIT PROJECTION:

6'-6 1/2"6'-6 1/8"15 1/4"

4'-11 1/4"4'-11 3/8"15 1/4"

9'-6 3/4"9'-5 9/16"

15 1/4"

10'-11 5/8"10'-10"15 1/4"

8'-1"8'-0 1/4"15 1/4"

8 9/16"5 1/16" 17 3/16" 22 3/16"12 1/16"

N33BOW N43BOW N53BOW N63BOW

N34BOW N44BOW N54BOW N64BOW N74BOW






N73BOW

Casements - “n” series Bow Windows

C a s e m e n t s “ n ” s e r i e s b O w w i n d O w s

NOTES:



If the cable support system and/or insulated platforms and support brackets are not being used, other means of proper support must be used. Add 1-11/1�" to the R.O. height if an insulated platform is being used. R.O.’s for bow units without head and seat boards, typically used for walk-out applications, are different.


PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KCN7�BOW).

U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash.)



W33BOW W43BOW W53BOW W63BOW

W34BOW W44BOW W54BOW W64BOW W74BOW






W73BOW

9 15/16"5 3/4" 20 1/4" 26 1/4"14 1/8"

U.d.r.o.

G.s.

UNIT PROJECTION:

Casements - “W” series Bow Windows

7'-10 3/16"7'-9 13/16"

19 1/4"

5'-11 3/16"5'-11 1/4"

19 1/4"

11'-5 11/16"11'-4 1/2"

19 1/4"

13'-1 15/16"13'-0 5/16"

19 1/4"

9'-8 3/8"9'-7 5/8"19 1/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

C a s e m e n t s “ w ” s e r i e s b O w w i n d O w s

NOTES:



If the cable support system and/or insulated platforms and support brackets are not being used, other means of proper support must be used. Add 1-11/1�" to the R.O. height if an insulated platform is being used.R.O.’s for bow units without head and seat boards, typically used for walk-out applications, are different.


PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KCW7�BOW).

U.D. = Unit Dimension Size • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash.)



C a s e m e n t s “ s ” s e r i e s 3 0 ° b ay w i n d O w s

10 3/8"

U.D.R.O.

G.S.

UNIT PROJECTION:

“S” Series 30° Bay Windows

S16-26-16S16-16-16 S16-36-16

5'-3 1/2"5'-1 13/16"

11 1/4"

6'-7 1/2"6'-5 13/16"

11 1/4"

3'-11 1/2"3'-9 13/16"

11 1/4"3'

-0"

3'-0

1/2

"31

1/4

"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

S156-256-156

S15-25-15

S146-246-146

S14-24-14

S136-236-136

S13-23-13

S156-156-156

S15-15-15

S146-146-146

S14-14-14

S136-136-136

S13-13-13

S156-356-156

S15-35-15

S146-346-146

S14-34-14

S136-336-136

S13-33-13

NOTES:



If the cable support system and/or insulated platforms & support brackets are not being used, other means of proper support must be used. Add 1-11/1�" to the R.O. height if an insulated platform is being used. R.O.’s for bay units without head and seat boards, typically used for walk-out applications, are different.



PRODUCT CODES:

To order units, add “�0KC” before the product number (Ex: �0KCS1�-1�-1�).




12 3/8"

N15-35P-15

N16-16-16 N16-26-16 N16-26P-16 N16-36-16 N16-36P-16

N156-156-156 N156-256-156 N156-256P-156 N156-356-156 N156-356P-156

N15-15-15 N15-25-15 N15-25P-15 N15-35-15

N146-146-146 N146-246-146 N146-246P-146 N146-346-146 N146-346P-146

N14-14-14 N14-24-14 N14-24P-14 N14-34-14 N14-34P-14

N136-136-136 N136-236-136 N136-236P-136 N136-336-136 N136-336P-136

N13-13-13 N13-23-13 N13-23P-13 N13-33-13 N13-33P-13

U.d.r.o.

G.s.

UNIT PROJECTION:

Casements - “n” series 30° Bay Windows

6'-6 3/8"6'-4 3/4"15 1/4"

6'-6 3/8"6'-4 3/4"

15 1/4" | 35 1/4" | 15 1/4"

4'-10 3/8"4'-8 3/4"15 1/4"

8'-2 3/8"8'-0 3/4"

15 1/4" | 55 1/4" | 15 1/4"

8'-2 3/8"8'-0 3/4"15 1/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

C a s e m e n t s “ n ” s e r i e s 3 0 ° b ay w i n d O w s

NOTES:



If the cable support system and/or insulated platforms and support brackets are not being used, other means of proper support must be used. Add 1-11/1�" to the R.O. height if an insulated platform is being used. R.O.’s for bay units without head and seat boards, typically used for walk-out applications, are different.



PRODUCT CODES:

To order units, add “�0KC” before the product number (Ex: �0KCN1�-��P-1�).




14 3/8"

W13-13-13 W13-23-13 W13-23P-13 W13-33-13

W14-14-14 W14-24-14 W14-24P-14 W14-34-14 W14-34P-14

W15-15-15 W15-25-15 W15-25P-15 W15-35-15 W15-35P-15

W16-16-16 W16-26-16 W16-26P-16 W16-36-16 W16-36P-16

W156-156-156 W156-256-156 W156-256P-156 W156-356-156 W156-356P-156

W146-146-146 W146-246-146 W146-246P-146 W146-346-146 W146-346P-146

W136-136-136 W136-236-136 W136-236P-136 W136-336-136 W136-336P-136

W13-33P-13

U.d.r.o.

G.s.

UNIT PROJECTION:

Casements - “W” series 30° Bay Windows

5'-9 5/16"5'-7 11/16"

19 1/4"

7'-9 5/16"7'-7 11/16"

19 1/4"

7'-9 5/16"7'-7 11/16"

19 1/4" | 43 1/4"| 19 1/4"

9'-9 5/16"9'-7 11/16"

19 1/4"

9'-9 5/16"9'-7 11/16"

19 1/4" | 67 1/4"| 19 1/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

C a s e m e n t s “ w ” s e r i e s 3 0 ° b ay w i n d O w s

NOTES:






PRODUCT CODES:

To order units, add “�0KC” before the product number (Ex: �0KCW1�-��P-1�).



�8 ClassiC series

C a s e m e n t s “ X ” s e r i e s 3 0 ° b ay w i n d O w s

17 3/8"

U.D.R.O.

G.S.

UNIT PROJECTION:

“X” Series 30° Bay Windows

X156-156-156

X14-14-14

X146-146-146

X15-15-15

X13-13-13

X136-136-136

X156-256-156

X14-24-14

X146-246-146

X15-25-15

X13-23-13

X136-236-136

X13-33-13

X136-336-136

X146-346-146

X14-34-14

X15-35-15

X156-356-156

X16-16-16 X16-26-16 X16-36-16

7'-1 3/4"7'-0 1/16"25 1/4"

9'-7 3/4"9'-6 1/16"

25 1/4"

12'-1 3/4"12'-0 1/16"

25 1/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

NOTES:






PRODUCT CODES:

To order units, add “�0KC” before the product number (Ex: �0KCX1�-1�-1�).




C a s e m e n t s “ s ” s e r i e s 4 5 ° b ay w i n d O w s

14 3/8"

U.D.R.O.

G.S.

UNIT PROJECTION:

“S” Series 45° Bay Windows

S16-26-16S16-16-16 S16-36-16

4'-11 15/16"4'-8 9/16"

11 1/4"

6'-3 15/16"6'-0 9/16"

11 1/4"

3'-7 15/16"3'-4 9/16"11 1/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

S156-256-156

S15-25-15

S146-246-146

S14-24-14

S136-236-136

S13-23-13

S156-156-156

S15-15-15

S146-146-146

S14-14-14

S136-136-136

S13-13-13

S156-356-156

S15-35-15

S146-346-146

S14-34-14

S136-336-136

S13-33-13

NOTES:






PRODUCT CODES:

To order units, add “��KC” before the product number (Ex: ��KCS1�-1�-1�).



�0 ClassiC series

17 3/16"

N14-14-14 N14-24-14 N14-24P-14 N14-34-14 N14-34P-14

N15-15-15 N15-25-15 N15-25P-15 N15-35-15 N15-35P-15

N16-16-16 N16-26-16 N16-26P-16 N16-36-16 N16-36P-16

N156-256-156 N156-356P-156

N146-146-146 N146-246-146 N146-246P-146 N146-346-146 N146-346P-146

N136-136-136 N136-236-136 N136-236P-136 N136-336-136 N136-336P-136

N13-13-13 N13-23-13 N13-23P-13 N13-33-13 N13-33P-13

N156-156-156 N156-256P-156 N156-356-156

U.d.r.o.

G.s.

UNIT PROJECTION:

Casements - “n” series 45° Bay Windows

4'-5 5/8"4'-2 3/16"

15 1/4"

6'-1 5/8"5'-10 3/16"

15 1/4"

6'-1 5/8"5'-10 3/16"

15 1/4" | 35 1/4"| 15 1/4"

7'-9 5/8"7'-6 3/16"

15 1/4"

7'-9 5/8"7'-6 3/16"

15 1/4" | 55 1/4"| 15 1/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

C a s e m e n t s “ n ” s e r i e s 4 5 ° b ay w i n d O w s

NOTES:






PRODUCT CODES:

To order units, add “��KC” before the product number (Ex: ��KCN1�-��P-1�).




20"

W13-13-13 W13-23-13 W13-23P-13 W13-33-13

W14-14-14 W14-24-14 W14-24P-14 W14-34-14 W14-34P-14

W15-15-15 W15-25-15 W15-25P-15 W15-35-15 W15-35P-15

W16-16-16 W16-26-16 W16-26P-16 W16-36-16 W16-36P-16

W156-156-156 W156-256-156 W156-256P-156 W156-356-156 W156-356P-156

W146-146-146 W146-246-146 W146-246P-146 W146-346-146 W146-346P-146

W136-136-136 W136-236-136 W136-236P-136 W136-336-136 W136-336P-136

W13-33P-13

U.d.r.o.

G.s.

UNIT PROJECTION:

Casements - “W” series 45° Bay Windows

5'-3 1/4"4'-11 7/8"

19 1/4"

7'-3 1/4"6'-11 7/8"

19 1/4"

9'-3 1/4"8'-11 7/8"

19 1/4"

9'-3 1/4"8'-11 7/8"

19 1/4" | 67 1/4"| 19 1/4"

7'-3 1/4"6'-11 7/8"

19 1/4" | 43 1/4"| 19 1/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

C a s e m e n t s “ w ” s e r i e s 4 5 ° b ay w i n d O w s

NOTES:



If the cable support system and/or insulated platforms and support brackets are not being used, other means of proper support must be used. Add 1-11/1�" to the R.O. height ifan insulated platform is being used. R.O.’s for bay units without head and seat boards, typically used for walk-out applications, are different.



PRODUCT CODES:

To order units, add “��KC” before the product number (Ex: ��KCW1�-��P-1�).




C a s e m e n t s “ X ” s e r i e s 4 5 ° b ay w i n d O w s

24 1/4"

U.D.R.O.

G.S.

UNIT PROJECTION:

“X” Series 45° Bay Windows

X15-15-15

X156-156-156

X14-14-14

X146-146-146

X13-13-13

X136-136-136

X15-25-15

X156-256-156

X14-24-14

X146-246-146

X13-23-13

X136-236-136

X13-33-13

X136-336-136

X14-34-14

X146-346-146

X15-35-15

X156-356-156

X16-16-16 X16-26-16 X16-36-16

6'-5 3/4"6'-2 3/8"25 1/4"

8'-11 3/4"8'-8 3/8"25 1/4"

11'-5 3/4"11'-2 3/8"

25 1/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

NOTES:






PRODUCT CODES:

To order units, add “��KC” before the product number (Ex: ��KCX1�-1�-1�).




U.d.r.o.

G.s.

3'-0

"3'

-0 1

/2"

31 1

/4"

3'-6

"3'

-6 1

/2"

37 1

/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

4'-6

"4'

-6 1

/2"

49 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

5'-6

"5'

-6 1

/2"

61 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

4'-7 1/2"4'-0 1/2"19 1/4"

4'-7 1/2"4'-0 1/2"43 1/4"

6'-7 1/2"6'-0 1/2"19 1/4"

6'-7 1/2"6'-0 1/2"67 1/4"

S13-W23-S13 S13-W23P-S13 S13-W33-S13 S13-W33P-S13

S14-W24-S14 S14-W24P-S14 S14-W34-S14 S14-W34P-S14

S15-W25-S15 S15-W25P-S15 S15-W35-S15 S15-W35P-S15

S16-W26-S16 S16-W26P-S16 S16-W36-S16 S16-W36P-S16

S156-W256-S156 S156-W256P-S156 S156-W356-S156 S156-W356P-S156

S146-W246-S146 S146-W246P-S146 S146-W346-S146 S146-W346P-S146

S136-W236-S136 S136-W236P-S136 S136-W336-S136 S136-W336P-S136

21 1/4"UNIT PROJECTION:

Casements - 90° Bay WindowsC a s e m e n t s 9 0 ° b ay w i n d O w s

NOTES:


Only flanker sash vent on 90° bay windows.

Grilles are optional. Follow chart down from top row and across from left column to determine grille configurations. Sizes and grille configurations for flanker sash can be found on the Casements - “S” Series chart on pg. 1�.




PRODUCT CODES:

To order units, add “90KC” before the product number (Ex: 90KCS1�-W��P-S1�).




FrenCH Casement CrOss seCtiOn drawinGs


FR

AM

E W

IDT

H

D.L

.O.

1/4"

2 7/

8"

5 7/8"

4 9/16"

1 1/

16"

FR

AM

E H

EIG

HT

2 7/

8"D

.L.O

.

1 7/

16"

FR

AM

E H

EIG

HT

D.L

.O.

1/2"

2 7/

8"

5 7/8"

4 9/16"1

1/16

"

HEAD

JAMB

SILL SILL

JAMB

HEAD

FR

AM

E H

EIG

HT

1/2"

D.L

.O.

2 7/

8"

5 7/8"

4 9/16"

1 1/

16"

5 7/8"

4 9/16"

1 1/

16"

1/4"

FR

AM

E W

IDT

H

2 7/

8"D

.L.O

.

FR

AM

E H

EIG

HT

2 7/

8"D

.L.O

.

1 7/

16"

Clad Meeting Stiles

2 1/2"

4"

French CasementCasementstandard Casement CrOss seCtiOn drawinGs

➢ Drawings are not to scale.➢ Segment head and half-circle top casement drawings are similar to standard casement drawings shown➢ Additional and the most current drawings are available after registration and sign-on at www.kolbe-kolbe.com

Clad Meeting Stiles


standard mullions

Clad Casement

Wood Casement

optional narrow mullion

Clad Casement

Wood Casement

WoodClad

Rectangular Transoms Stacked over Casements

5 3/

4"

5 3/4"5 3/4"

2 1/8"2 1/8"

2 1/

2"

2 1/8"

5 3/4"

2 1/8"

2 1/

2"

5 3/4"

5 3/

4"

standard mulliOns OptiOnal narrOw mulliOns

reCtanGular transOms staCKed Over Casements

Drawings are not to scale.


5 3/

4"

2 1/

8"


Casement bOw windOw CrOss seCtiOn drawinGs

Vertical Section

Horizontal Section



BY OTHERS

RO

UG

H O

PE

NIN

G H

EIG

HT

UN

IT D

IME

NS

ION

HE

IGH

T

K & K INSULATED PLATFORMK & K SUPPORT BRACKET

UNIT PROJECTION

K&K INSULATED PLATFORM

1 11

/16"

1/2"

1 11/16"

UNIT DIMENSION WIDTH

10°

UN

IT P

RO

JEC

TIO

N

ROUGH OPENING WIDTH

1/4"


Casement bay windOw CrOss seCtiOn drawinGs

�0° Horizontal Section

��° Horizontal Section

90° Horizontal Section

➢ Drawings are not to scale.➢ Casement bay vertical drawings are similar to casement bow vertical drawings on pg. ��.



UN

IT P

RO

JEC

TIO

N

ROUGH OPENING WIDTH

30°


45°

UN

IT P

RO

JEC

TIO

N

ROUGH OPENING WIDTH


ROUGH OPENING WIDTH

UN

IT P

RO

JEC

TIO

N

1 1/

2"3

3/4"

�8 ClassiC series

awninGsawninGs

piCture units

piCture Combination units

mulleD ConFiGurations


Gl a s s:➢ H°KLoE2-240*

➢ H°KLoE3-366*

➢ Patterned-,bronze-orgray-lite

➢ Temperedorlaminated

➢ Otheroptionsstandardtotheindustry

Gr i l l e s :➢ Grilles-in-the-airspace

➢ Interiorremovablewoodgrilleswith7/8"or1-1/8"barsand

fullsurrounds

➢ PDLwith5/8",7/8",1-1/8",1-3/4"or2-1/4"bars

Ot h e r Op t i O n s: ➢ Otherwoodspecies

➢ Ovoloprofileglazingbeadsandinteriorgrillebars

➢ Interiorprefinishing

➢ Interiorcasing

➢ Prepforstool

➢ Multi-pointlocks

➢ Operatorcovers,handlesandmulti-pointlocksinWhite,Beige,

Brassorcustomfinisheslistedabove

➢ ScreenframesinWhite,BeigeorBrass,withaluminumor

charcoal-coloredaluminummesh(excludingBrassframes)

➢ Woodwrappedscreens

➢ Extensionjambs(upto12"applied,over12"shippedloosefor

fieldapplication)

➢ Motorizedwindowsystem

A w n i n g O p t i O n A l F e At u r e s

NOTES:

Allmeasurementsarenominal.

*Argongasmaynotbeincludedwithunitstobeinstalledinorshippedthroughhighaltitudeareas.

h a r d wa r e

Clay-colored, folding handles are applied to awning units as standard.

StandardawningoperatorcoversandhandlesarealsoavailableinWhite,

Beige and Brass. Custom finishes include Antique Brass, Satin Nickel,

AntiqueNickel,MatteBlack,Oil-rubbedandRusticUmber.

A w n i n g s tA n d A r d F e At u r e s

➢ 1-3/4"thicksash

➢ Overalljambwidthis4-9/16"(basicboxwidthis2-7/16"onunits,

plusextensions)

➢ Constructedofpine,withpineinteriorstopsandwoodmull

casingsonmulledunits

➢ Prefinished,heavygaugeroll-formedaluminumcladding

➢ 7/8"H°KLoE2-270insulatingglass*

➢ Glazedtotheinteriorwithwoodglazingbeads

➢ Allexteriorwoodpartsarepreservative-treated

➢ Fullyweatherstrippedforatightseal

➢ InteriorscreenswithClay-coloredaluminumframesand

charcoal-coloredfiberglassmesh

➢ Clay-coloredfoldinghandlesandoperatorcovers

➢ Roto-styleoperatorswithconcealed,adjustablehinges

➢ Heavyvinylnailingfin

Vinylnailingfinappliedasstandard

foldinghandleinClay(closed)

foldinghandleinClay(open)

C l A s s i C s e r i e s A w n i n g s

�0 ClassiC series

F.s.r.o.

G.s.

2'-6"2'-6 1/2"25 1/4"

2618

1'-8

"1'

-8 1

/2"

15 1

/4"

2620

2'-0

"2'

-0 1

/2"

19 1

/4"

2626

2'-6

"2'

-6 1

/2"

25 1

/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

2630

3'-0"3'-0 1/2"31 1/4"

3018

3020

3026

3030

3'-6"3'-6 1/2"37 1/4"

3618

3620

3626

3630

4'-0"4'-0 1/2"43 1/4"

4018

4020

4026

4030

awnings – single units

C l a s s i C s e r i e s a w n i n G s

a w n i n G s s i n G l e u n i t s

F.s.r.o.

G.s.

2'-6"2'-6 1/2"25 1/4"

2640

2650

4'-0

"4'

-0 1

/2"

43 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

2660

3'-0"3'-0 1/2"31 1/4"

3040

3050

3060

3'-6"3'-6 1/2"37 1/4"

3650

3660

3640

4'-0"4'-0 1/2"43 1/4"

4040

4050

4060

awnings – single Picture unitsa w n i n G s s i n G l e p i C t u r e u n i t s

NOTES:


Grilles are optional.


PRODUCT CODES:

To order single units, add “KC” before the product number and number “1” after (Ex: KC�0�01).



F.S. to Sash O.S.M. -1 1�/1�" -1 1�/1�"Sash O.S.M. to G.S. -� 1�/1�" -� 1�/1�"G.S. to D.L.O. -1" -1"G.S. to Screen O.S.M. +1 9/1�" +1/�"note: Clear opening dimensions can be found on pg. 101.


wiDth heiGht


F.s.r.o.

G.s.

2'-6"2'-6 1/2"25 1/4"

26181 26182 26183

261813 261823 261833

261812 261822 261832

5'-0"5'-0 1/2"25 1/4"

7'-6"7'-6 1/2"25 1/4"

1'-8

"1'

-8 1

/2"

15 1

/4"

3'-4

"3'

-4 1

/2"

15 1

/4"

5'-0

"5'

-0 1

/2"

15 1

/4"

262012 262022 262032

262013 262023 262033

26201 26202 26203

2'-0

"2'

-0 1

/2"

19 1

/4"

4'-0

"4'

-0 1

/2"

19 1

/4"

6'-0

"6'

-0 1

/2"

19 1

/4"

26261 26262 26263

262612 262622 262632

2'-6

"2'

-6 1

/2"

25 1

/4"

5'-0

"5'

-0 1

/2"

25 1

/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

6'-0

"6'

-0 1

/2"

31 1

/4"

26301 26302 26303

263012 263022 263032

awning units & mull Configurations2'-6" widths

Bas

ic U

nit 2

618

Bas

ic U

nit 2

620

Bas

ic U

nit 2

626

Bas

ic U

nit 2

630

F.s.r.o.

G.s.

awning Picture units2'-6" widths

2'-6"2'-6 1/2"25 1/4"

5'-0"5'-0 1/2"25 1/4"

7'-6"7'-6 1/2"25 1/4"

26401 26402 26403

26501 26502 26503

4'-0

"4'

-0 1

/2"

43 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

26601 26602 26603

Bas

ic U

nit 2

640

Bas

ic U

nit 2

650

Bas

ic U

nit 2

660

F.s.r.o.

G.s.

2'-6"2'-6 1/2"25 1/4"

5'-0"5'-0 1/2"25 1/4"

7'-6"7'-6 1/2"25 1/4"

2630181 2630182 2630183

4'-8

"4'

-8 1

/2"

15 1

/4"

| 31

1/4"

5'-0

"5'

-0 1

/2"

19 1

/4"

| 31

1/4"

2630201 2630202 2630203

2640181 2640182 2640183

5'-8

"5'

-8 1

/2"

15 1

/4"

| 43

1/4"

2640201 2640202 2640203

6'-0

"6'

-0 1

/2"

19 1

/4"

| 43

1/4"

6'-8

"6'

-8 1

/2"

15 1

/4"

| 55

1/4"

2650181 2650182 2650183

Bas

ic U

nit 2

630

over

261

8awning unit Combinations2'-6" widths

Bas

ic U

nit 2

630

over

262

0B

asic

Uni

t 264

0ov

er 2

618

Bas

ic U

nit 2

640

over

262

0B

asic

Uni

t 265

0ov

er 2

618


a w n i n G u n i t s & m u l l C O n F i G u r at i O n s

�' �" widths

a w n i n G p i C t u r e u n i t s

�' �" widths

a w n i n G u n i t C O m b i n at i O n s

�' �" widths

NOTES:


Grilles are optional. The grille configuration shown for single units are typical for each sash of mulled units.

Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/�" on all sides and still be within good practice guidelines.For rough opening recommendations, see pg. 101.

PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KC��0��).



F.s.r.o.

G.s.


1'-8

"1'

-8 1

/2"

15 1

/4"

3'-4

"3'

-4 1

/2"

15 1

/4"

5'-0

"5'

-0 1

/2"

15 1

/4"

2'-0

"2'

-0 1

/2"

19 1

/4"

4'-0

"4'

-0 1

/2"

19 1

/4"

6'-0

"6'

-0 1

/2"

19 1

/4"

2'-6

"2'

-6 1

/2"

25 1

/4"

5'-0

"5'

-0 1

/2"

25 1

/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

6'-0

"6'

-0 1

/2"

31 1

/4"

3'-0"3'-0 1/2"31 1/4"

6'-0"6'-0 1/2"31 1/4"

9'-0"9'-0 1/2"31 1/4"

30181 30182 30183

302012 302022 302032

301812 301822 301832

301813 301823 301833

30201 30202 30203

302013 302023 302033

30261 30262 30263

302612 302622 302632

30301 30302 30303

303012 303022 303032

Bas

ic U

nit 3

018

Bas

ic U

nit 3

020

Bas

ic U

nit 3

026

Bas

ic U

nit 3

030

F.s.r.o.

G.s.


3'-0"3'-0 1/2"31 1/4"

6'-0"6'-0 1/2"31 1/4"

9'-0"9'-0 1/2"31 1/4"

4'-0

"4'

-0 1

/2"

43 1

/4"

5'-0

"5'

-0 1

/2"

55 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

30401 30402 30403

30501 30502 30503

30601 30602 30603

Bas

ic U

nit 3

040

Bas

ic U

nit 3

050

Bas

ic U

nit 3

060

F.s.r.o.

G.s.

awning unit Combinations3'-0" widths

3030201 3030202 3030203

3040181 3040182 3040183

3040201 3040202 3040203

3050181 3050182 3050183

4'-8

"4'

-8 1

/2"

15 1

/4"

| 31

1/4"

5'-0

"5'

-0 1

/2"

19 1

/4"

| 31

1/4"

5'-8

"5'

-8 1

/2"

15 1

/4"

| 43

1/4"

6'-0

"6'

-0 1

/2"

19 1

/4"

| 43

1/4"

6'-8

"6'

-8 1

/2"

15 1

/4"

| 55

1/4"

3'-0"3'-0 1/2"31 1/4"

3030181 3030182 3030183

6'-0"6'-0 1/2"31 1/4"

9'-0"9'-0 1/2"31 1/4"

Bas

ic U

nit 3

030

over

301

8B

asic

Uni

t 303

0ov

er 3

020

Bas

ic U

nit 3

040

over

301

8B

asic

Uni

t 304

0ov

er 3

020

Bas

ic U

nit 3

050

over

301

8



�' 0" widths


�' 0" widths


�' 0" widths

NOTES:




PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KC�0�0��).



F.s.r.o.


G.s.

1'-8

"1'

-8 1

/2"

15 1

/4"

3'-4

"3'

-4 1

/2"

15 1

/4"

5'-0

"5'

-0 1

/2"

15 1

/4"

2'-0

"2'

-0 1

/2"

19 1

/4"

4'-0

"4'

-0 1

/2"

19 1

/4"

6'-0

"6'

-0 1

/2"

19 1

/4"

2'-6

"2'

-6 1

/2"

25 1

/4"

5'-0

"5'

-0 1

/2"

25 1

/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

6'-0

"6'

-0 1

/2"

31 1

/4"

3'-6"3'-6 1/2"37 1/4"

7'-0"7'-0 1/2"37 1/4"

10'-6"10'-6 1/2"

37 1/4"

36181 36182 36183

361812 361822 361832

361813 361823 361833

36201 36202 36203

362012 362022 362032

362013 362023 362033

36261 36262 36263

362612 362622 362632

36301 36302 36303

363012 363022 363032

Bas

ic U

nit 3

618

Bas

ic U

nit 3

620

Bas

ic U

nit 3

626

Bas

ic U

nit 3

630


F.s.r.o.

G.s.


3'-6"3'-6 1/2"37 1/4"

7'-0"7'-0 1/2"37 1/4"

10'-6"10'-6 1/2"

37 1/4"

4'-2

"4'

-0 1

/2"

43 1

/4"

5'-2

"5'

-0 1

/2"

55 1

/4"

6'-2

"6'

-0 1

/2"

67 1

/4"

36402 36403

36501 36502 36503

36601 36602 36603

36401

Bas

ic U

nit 3

640

Bas

ic U

nit 3

650

Bas

ic U

nit 3

660

F.s.r.o.

G.s.


3630181 3630182 3630183

4'-8

"4'

-8 1

/2"

15 1

/4"

| 31

1/4"

5'-0

"5'

-0 1

/2"

19 1

/4"

| 31

1/4"

5'-8

"5'

-8 1

/2"

15 1

/4"

| 43

1/4"

6'-0

"6'

-0 1

/2"

19 1

/4"

| 43

1/4"

6'-8

"6'

-8 1

/2"

15 1

/4"

| 55

1/4"

3'-6"3'-6 1/2"37 1/4"

7'-0"7'-0 1/2"37 1/4"

10'-6"10'-6 1/2"

37 1/4"

3630201 3630202 3630203

3640181 3640182 3640183

3640201 3640202 3640203

3650182 36501833650181

Bas

ic U

nit 3

630

over

361

8B

asic

Uni

t 363

0ov

er 3

620

Bas

ic U

nit 3

640

over

361

8B

asic

Uni

t 364

0ov

er 3

620

Bas

ic U

nit 3

650

over

361

8


�' �" widths


�' �" widths


�' �" widths

NOTES:




PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KC��0��).



F.s.r.o.


G.s.

1'-8

"1'

-8 1

/2"

15 1

/4"

3'-4

"3'

-4 1

/2"

15 1

/4"

5'-0

"5'

-0 1

/2"

15 1

/4"

2'-0

"2'

-0 1

/2"

19 1

/4"

4'-0

"4'

-0 1

/2"

19 1

/4"

6'-0

"6'

-0 1

/2"

19 1

/4"

2'-6

"2'

-6 1

/2"

25 1

/4"

5'-0

"5'

-0 1

/2"

25 1

/4"

3'-0

"3'

-0 1

/2"

31 1

/4"

6'-0

"6'

-0 1

/2"

31 1

/4"

4'-0"4'-0 1/2"43 1/4"

8'-0"8'-0 1/2"43 1/4"

12'-0"12'-0 1/2"

43 1/4"

40181 40182 40183

401812 401822 401832

401813 401823 401833

40201 40202 40203

402012 402022 402032

402013 402023 402033

40261 40262 40263

402612 402622 402632

40301 40302 40303

403012 403022 403032

Bas

ic U

nit 4

018

Bas

ic U

nit 4

020

Bas

ic U

nit 4

026

Bas

ic U

nit 4

030


F.s.r.o.

G.s.


40401 40402 40403

40501 40502 40503

40601 40602 40603

4'-0"4'-0 1/2"43 1/4"

8'-0"8'-0 1/2"43 1/4"

12'-0"12'-0 1/2"

43 1/4"

Bas

ic U

nit 4

040

Bas

ic U

nit 4

050

Bas

ic U

nit 4

060

4-0"

4'-0

1/2

"43

1/4

"

5'-0

"5'

-0 1

/2"

55 1

/4"

6'-0

"6'

-0 1

/2"

67 1

/4"

F.s.r.o.

G.s.


4030181 4030182 4030183

4030201 4030202 4030203

4040181 4040182 4040183

4040201 4040202 4040203

4050182 40501834050181

4'-8

"4'

-8 1

/2"

15 1

/4"

| 31

1/4"

5'-0

"5'

-0 1

/2"

19 1

/4"

| 31

1/4"

5'-8

"5'

-8 1

/2"

15 1

/4"

| 43

1/4"

6'-0

"6'

-0 1

/2"

19 1

/4"

| 43

1/4"

6'-8

"6'

-8 1

/2"

15 1

/4"

| 55

1/4"

4'-0"4'-0 1/2"43 1/4"

8'-0"8'-0 1/2"43 1/4"

12'-0"12'-0 1/2"

43 1/4"

Bas

ic U

nit 4

030

over

401

8B

asic

Uni

t 403

0ov

er 4

020

Bas

ic U

nit 4

040

over

401

8B

asic

Uni

t 404

0ov

er 4

020

Bas

ic U

nit 4

050

over

401

8


�' 0" widths


�' 0" widths


�' 0" widths

NOTES:




PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KC�0�0��).




standard awninG CrOss seCtiOn drawinGs

standard mulliOns OptiOnal narrOw mulliOnspiCture units staCKed

Over awninGs

Drawings are not to scale.Additional and the most current drawings are available after registration and sign-on at www.kolbe-kolbe.com

FR

AM

E W

IDT

H

D.L

.O.

1/4"

2 7/

8"5 7/8"

4 9/16"

1 1/

16"

FR

AM

E H

EIG

HT

2 7/

8"D

.L.O

.

1 7/

16"

FR

AM

E H

EIG

HT

D.L

.O.

1/2"

2 7/

8"

5 7/8"

4 9/16"

1 1/

16"

HEAD

JAMB

SILL SILL

JAMB

HEAD

FR

AM

E H

EIG

HT

1/2"

D.L

.O.

2 7/

8"

5 7/8"

4 9/16"

1 1/

16"

5 7/8"

4 9/16"

1 1/

16"

1/4"

FR

AM

E W

IDT

H

2 7/

8"D

.L.O

.

FR

AM

E H

EIG

HT

2 7/

8"D

.L.O

.

1 7/

16"

Clad Meeting Stiles

2 1/2"

4"

French CasementCasement

standard mullions

Clad Casement

Wood Casement

optional narrow mullion

Clad Casement

Wood Casement

WoodClad

Rectangular Transoms Stacked over Casements

5 3/

4"

5 3/4"5 3/4"

2 1/8"2 1/8"

2 1/

2"

2 1/8"

5 3/4"

2 1/8"

2 1/

2"

5 3/4"

5 3/

4"

5 3/

4"

2 1/

8"


Double hunGstraDitional Double hunGs

stuDio & transom units

piCture Combination units

bay units

replaCement sash Kits


C l a s s i C s e r i e s t r a d i t i O n a l d O u b l e H u n G s

t r a d i t i O n a l d O u b l e H u n G s ta n d a r d F e at u r e s

Vinyl nailing fin applied as standard

➢ 1-�/8" thick sash

➢ Overall jamb width is �-9/1�" (basic box width is �-9/1�")

➢ Frame thickness is �/�" at side jambs and head

➢ Sill thickness is 1-�/1�", slope is 1�°

➢ Constructed of pine, with pine interior stops and wood mull casings

on mulled units

➢ Prefinished, heavy gauge roll-formed aluminum cladding

➢ 9/1�" H°K LoE� insulating glass filled with argon gas*

➢ Glazed to the interior with wood glazing beads

➢ All exterior wood parts are preservative-treated

➢ Fully weatherstripped for a tight seal

➢ Clay-colored heavy duty sash lock

➢ Machined finger grooves on the top rail of the upper sash and bottom

rail of the lower sash

➢ Spring-loaded block-and-tackle mechanical balances to carry the

sash weight

➢ Beige PVC jambliners with compression foam backing

➢ Pine-veneered head and seat boards; unique narrow mullions and cable

support system on bay units

➢ Heavy vinyl nailing fin

t r a d i t i O n a l d O u b l e H u n G O p t i O n a l F e at u r e s

h a r D wa r e

Clay-colored cam locks are factory-applied to double hung units as standard.

Standard double hung hardware is also available in White, Beige and Brass.

Custom finishes for double hung sash locks include Antique Brass, Satin

Nickel, Antique Nickel, Matte Black, Oil-rubbed and Rustic Umber.

NOTES:

All measurements are nominal.

* Argon gas may not be included with units to be installed in or shipped through high altitude areas.

** Fiberglass mesh screen cloth in a charcoal color will be used unless aluminum mesh is requested.

Aluminum mesh is available in either an aluminum or charcoal color.

Gl a s s:➢ H°K LoE� -��0*

➢ H°K LoE� -��*➢ Patterned-, bronze- or gray-lite➢ Tempered or laminated➢ Other options standard to the industry

Gr i l l e s :➢ Grilles-in-the-airspace➢ Interior removable wood grilles with 7/8" or 1-1/8" bars and full surrounds➢ PDL with �/8", 7/8", 1-1/8", 1-�/�" or �-1/�" bars

ot h e r op t i o n s: ➢ Other wood species

➢ Ovolo profile glazing beads and interior grille bars➢ Interior prefinishing➢ Interior casing➢ Prep for stool➢ Sash locks in White, Beige, Brass and custom finishes listed above➢ White jambliners➢ Full screens with aluminum frames in exterior clad colors and fiberglass mesh **➢ StormGuard combination storm/screen units➢ Extension jambs (up to 1�" applied, over 1�" shipped loose for field application)➢ Insulated platforms, support brackets, and oak-veneered head and seat boards for bay units➢ Available as replacement sash kits

clay (standard) white beige

�8 ClassiC series

C l a s s i C s e r i e s d O u b l e H u n G s

DH1614 DH2014 DH2414 DH2814 DH3214DH2614 DH3014 DH3614 DH4014

DH1616 DH2016 DH2416 DH2616 DH2816 DH3016 DH3216 DH3616


DH1622 DH2022 DH2422 DH2622 DH2822 DH3022 DH3222 DH3622

DH4016

DH4022


DH1626 DH2026 DH2426 DH2626 DH2826 DH3026* DH3226* DH3626* DH4026*

DH1628 DH2028 DH2428 DH2628 DH2828* DH3028* DH3228* DH3628*

DH1630 DH2030 DH2430 DH2830* DH3230*DH2630* DH3030* DH3630* DH4030*

DH1632 DH2032 DH2432* DH2632* DH2832* DH3032* DH3232* DH3632*

DH4028*

DH4032*

DH1634 DH2034 DH2434* DH2834* DH3234*DH2634* DH3034* DH3634* DH4034*

DH1636 DH2036 DH2436* DH2636* DH2836* DH3036* DH3236* DH3636* DH4036*

1'-9 1/2"1'-10"1'-8"16"

2'-1 1/2"2'-2"2'-0"20"

3'-1 1/2"3'-2"3'-0"32"

3'-0

7/1

6"3'

-1"

2'-1

0"14

" | 1

4"

3'-4

7/1

6"3'

-5"

3'-2

"16

" | 1

6"

4'-0

7/1

6"4'

-1"

3'-1

0"20

" | 2

0"

4'-4

7/1

6"4'

-5"

4'-2

"22

" | 2

2"

4'-8

7/1

6"4'

-9"

4'-6

"24

" | 2

4"

5'-0

7/1

6"5'

-1"

4'-1

0"26

" | 2

6"

5'-4

7/1

6"5'

-5"

5'-2

"28

" | 2

8"

2'-5 1/2"2'-6"2'-4"24"

2'-9 1/2"2'-10"2'-8"28"

3'-5 1/2"3'-6"3'-4"36"

3'-9 1/2"3'-10"3'-8"40"

5'-8

7/1

6"5'

-9"

5'-6

"30

" | 3

0"

6'-0

7/1

6"6'

-1"

5'-1

0"32

" | 3

2"

6'-4

7/1

6"6'

-5"

6'-2

"34

" | 3

4"

6'-8

7/1

6"6'

-9"

6'-6

"36

" | 3

6"

F.s.r.o.

s.o.G.s.

2'-7 1/2"2'-8"2'-6"26"

2'-11 1/2"3'-0"2'-10"

30"

double Hung Units

NOTES:


Single units shown are also available as singlehung units and replacement sash kits.

Grilles are optional. Follow chart down from toprow and across from left column to determine grille configurations.


The side jambs of double hung units extend above the head jamb; additional space for the rough opening height may be necessary.



PRODUCT CODES:

To order units, add “C” before the product number and “-1,” “-�,” or “-�” after to denote a single, twin or triple unit, respectively

(Ex: CDH�0��-1).

F.S. = Frame Size

R.O. = Rough Opening

S.O. = Sash Opening

G.S. = Glass Size

d O u b l e H u n G s s i n G l e u n i t s


5'-8

7/1

6"5'

-9"

5'-6

"36

" | 2

4"

DH1624/36 DH2024/36 DH2424/36 DH2624/36 DH2824/36 DH3024/36 DH3224/36

1'-9 1/2"1'-10"1'-8"16"

2'-1 1/2"2'-2"2'-0"20"

3'-1 1/2"3'-2"3'-0"32"

2'-5 1/2"2'-6"2'-4"24"

2'-9 1/2"2'-10"2'-8"28"

3'-5 1/2"3'-6"3'-4"36"

3'-9 1/2"3'-10"3'-8"40"

F.s.r.o.

s.o.G.s.

Cottage-style Double Hung units

DH3624/36 DH4024/36

2'-7 1/2"2'-8"2'-6"26"

2'-11 1/2"3'-0"2'-10"

30"


Width Dimensions for Twin Mulled Units:

Glass (per-sash)

R.O.F.S

16"3'-7 1/2"

3'-7"

20"4'-3 1/2"

4'-3"

24"4'-11 1/2"

4'-11"

28"5'-7 1/2"

5'-7"

32"6'-3 1/2"

6'-3"

36"6'-11 1/2"

6'-11"

40"7'-7 1/2"

7'-7"

Width Dimensions for Triple Mulled Units:

Glass (per-sash)

R.O.F.S.

16"5'-5"

5'-4 1/2"

20"6'-5"

6'-4 1/2"

24"7'-5"

7'-4 1/2"

28"8'-5"

8'-4 1/2"

32"9'-5"

9'-4 1/2"

36"10'-5"

10'-4 1/2"

40"11'-5"

11'-4 1/2"

(DH1614-2)

(DH1614-3)

26"5'-3 1/2"

5'-3"

30"5'-11 1/2"

5'-11"

26"7'-11"

7'-10 1/2"

30"8'-11"

8'-10 1/2"

Width Dimensions for Twin Mulled Units:

Glass (per-sash)

R.O.F.S

16"3'-7 1/2"

3'-7"

20"4'-3 1/2"

4'-3"

24"4'-11 1/2"

4'-11"

28"5'-7 1/2"

5'-7"

32"6'-3 1/2"

6'-3"

36"6'-11 1/2"

6'-11"

40"7'-7 1/2"

7'-7"

Width Dimensions for Triple Mulled Units:

Glass (per-sash)

R.O.F.S.

16"5'-5"

5'-4 1/2"

20"6'-5"

6'-4 1/2"

24"7'-5"

7'-4 1/2"

28"8'-5"

8'-4 1/2"

32"9'-5"

9'-4 1/2"

36"10'-5"

10'-4 1/2"

40"11'-5"

11'-4 1/2"

(DH1614-2)

(DH1614-3)

26"5'-3 1/2"

5'-3"

30"5'-11 1/2"

5'-11"

26"7'-11"

7'-10 1/2"

30"8'-11"

8'-10 1/2"

w i d t H d i m e n s i O n s F O r t w i n m u l l e d u n i t s

w i d t H d i m e n s i O n s F O r t r i p l e m u l l e d u n i t s

NOTES:


Grilles are optional.




PRODUCT CODES:

To order units, add “C” before the product number and “-1,” “-�,” or “-�” after to denote a single, twin or triple unit, respectively (Ex: CDH1��/��-1).

F.S. = Frame Size • R.O. = Rough Opening

S.O. = Sash Opening • G.S. = Glass Size


F.S. to S.O. -1 1/�" -� 7/1�"S.O. to G.S. -�" -�"÷�G.S. to D.L.O. -1" -1"note: Clear opening dimensions can be found on pg. 101. Cottage-style dimension calculations are different; please contact your supplier.

F.S. = Frame Size • G.S. = Glass Size • S.O. = Sash OpeningD.L.O. = Daylight Opening

d O u b l e H u n G s C O t ta G e - s t y l e u n i t s

wiDth heiGht

�0 ClassiC series

1'-9 1/2"1'-10"1'-8"16"

2'-1 1/2"2'-2"2'-0"20"

3'-1 1/2"3'-2"3'-0"32"

0'-1

1 1/

2"1'

-0"

10"

6"

1'-3

1/2

"1'

-4"

14"

10"

1'-5

1/2

"1'

-6"

16"

12"

1'-7

1/2

"1'

-8"

18"

14"

1'-1

1 1/

2"2'

-0"

22"

18"

2'-5

1/2

"2'

-6"

28"

24"

2'-5 1/2"2'-6"2'-4"24"

2'-9 1/2"2'-10"2'-8"28"

3'-5 1/2"3'-6"3'-4"36"

3'-9 1/2"3'-10"3'-8"40"

F.s.r.o.

s.o.G.s.

Double Hungs – Rectangular transoms

DHT1606 DHT2006 DHT2406 DHT2806 DHT3206 DHT3606 DHT4006







d O u b l e H u n G s r e C ta n G u l a r t r a n s O m s

NOTES:

All measurements are nominal. These dimensions apply only for transoms with flat sills. Contact your supplier for dimensions ofunits with beveled sills. Elevation charts are not to scale.

Transom units are only available with a 1-�/�" sash.






PRODUCT CODES:

To order transoms, add “C” before the product number (Ex: CDHT�0��).

F.S. = Frame Size • R.O. = Rough Opening • S.O. = Sash Opening • G.S. = Glass Size


F.s.r.o.

s.o.G.s.

4'-1 1/2"4'-2"4'-0"

44 1/2"

DHS40310 DHS44310 DHS50310

DHS4042 DHS4442 DHS5042

4'-5 1/2"4'-6"4'-4"

48 1/2"

5'-1 1/2"5'-2"5'-0"

56 1/2"

4'-0

7/1

6"4'

-1"

3'-1

0"41

1/4

"

4'-4

7/1

6"4'

-5"

4'-2

"45

1/4

"

4'-8

7/1

6"4'

-9"

4'-6

"49

1/4

"

5'-0

7/1

6"5'

-1"

4'-1

0"53

1/4

"

DHS4046 DHS4446 DHS5046

DHS40410 DHS44410 DHS50410

DHS58310 DHS64310 DHS70310

DHS5842 DHS6442

DHS84310

DHS7042 DHS8442

DHS5846 DHS6446 DHS7046

DHS70410

DHS8446

DHS5052

DHS84410DHS58410 DHS64410

DHS5852 DHS6452 DHS7052 DHS8452

DHS4056 DHS4456 DHS5056 DHS5856 DHS6456 DHS7056 DHS8456

DHS4452DHS4052

5'-4

7/1

6"5'

-5"

5'-2

"57

1/4

"

5'-8

7/1

6"5'

-9"

5'-6

"*61

1/4

"

5'-9 1/2"5'-10"5'-8"

64 1/2"

6'-5 1/2"6'-6"6'-4"

72 1/2"

7'-1 1/2"7'-2"7'-0"

80 1/2"

8'-5 1/2"8'-6"8'-4"

96 1/2"

6'-0

7/1

6"6'

-1"

5'-1

0"65

1/4

"

6'-4

7/1

6"6'

-5"

6'-2

"69

1/4

"

6'-8

7/1

6"6'

-9"

6'-6

"73

1/4

"




Double Hungs – studio Picture units


d O u b l e H u n G s s t u d i O u n i t s

NOTES:


Studio units are only available with a 1-�/�" sash.





* To match cottage-style double hungs with grilles, �'-�" high (S.O.) units must be ordered � lites high.

PRODUCT CODES:

To order units, add “C” before the product number (Ex: CDHS8��).



F.s.r.o.

s.o.G.s.*

Double Hung Picture units16" flankers

8'-0 1/2"8'-1"

1'-8" | 4'-4" | 1'-8"16" | 48 1/2" | 16"

10'-0 1/2"10'-1"

1'-8" | 6'-4" | 1'-8"16" | 72 1/2" | 16"

4'-4

7/1

6"4'

-5"

4'-2

"22

" | 4

5 1/

4"

4'-8

7/1

6"4'

-9"

4'-6

"24

" | 4

9 1/

4"

5'-5

7/1

6"5'

-5"

5'-2

"28

" | 5

7 1/

4"

8'-8 1/2"8'-9"

1'-8" | 5'-0" | 1'-8"16" | 56 1/2" | 16"

9'-4 1/2"9'-5"

1'-8" | 5'-8" | 1'-8"16" | 64 1/2" | 16"

DH16284452 DH16285052 DH16285852 DH16286452

DH16224442 DH16225042 DH16225842 DH16226442

DH16244446 DH16245046 DH16245846 DH16246446


d O u b l e H u n G p i C t u r e u n i t s

1�" flankers


�0" flankers

F.s.r.o.

s.o.G.s.*

4'-4

7/1

6"4'

-5"

4'-2

"22

" | 4

5 1/

4"

4'-8

7/1

6"4'

-9"

4'-6

"24

" | 4

9 1/

4"

5'-5

7/1

6"5'

-5"

5'-2

"28

" | 5

7 1/

4"

8'-8 1/2"8'-9"

2'-0" | 4'-4" | 2'-0"20" | 48 1/2" | 20"

10'-8 1/2"10'-9"

2'-0" | 6'-4" | 2'-0"20" | 72 1/2" | 20"

9'-4 1/2"9'-5"

2'-0" | 5'-0" | 2'-0"20" | 56 1/2" | 20"

10'-0 1/2"10'-1"

2'-0" | 5'-8" | 2'-0"20" | 64 1/2" | 20"

DH20284452 DH20285052 DH20285852 DH20286452

DH20224442 DH20225042 DH20225842 DH20226442

DH20244446 DH20245046 DH20245846 DH20246446


NOTES:


Center picture units are only available with a 1-�/�" sash.



The side jambs of double hung units extend above the head jamb; additional space for the rough opening height may be necessary.For rough opening recommendations, see pg. 101.

* The first number of the glass size height is the height (per sash) for each flanker sash. The second number is the glass height forthe center picture unit.

PRODUCT CODES:

To order units, add “C” before the product number (Ex: CDH�0�8��).





��" flankers

F.s.r.o.

s.o.G.s.*

DH24284452 DH24285052 DH24285852 DH24286452

DH24224442 DH24225042 DH24225842 DH24226442

DH24244446 DH24245046 DH24245846 DH24246446

4'-4

7/1

6"4'

-5"

4'-2

"22

" | 4

5 1/

4"

4'-8

7/1

6"4'

-9"

4'-6

"24

" | 4

9 1/

4"

5'-5

7/1

6"5'

-5"

5'-2

"28

" | 5

7 1/

4"9'-4 1/2"

9'-5"2'-4" | 4'-4" | 2'-4"24" | 48 1/2" | 24"

11'-4 1/2"11'-5"

2'-4" | 6'-4" | 2'-4"24" | 72 1/2" | 24"

10'-0 1/2"10'-1"

2'-4" | 5'-0" | 2'-4"24" | 56 1/2" | 24"

10'-8 1/2"10'-9"

2'-4" | 5'-8" | 2'-4"24" | 64 1/2" | 24"


NOTES:






* The first number of the glass size height is the height (per sash) for each flanker sash. The second number is the glass height for the center picture unit.


PRODUCT CODES:

To order units, add “C” before the product number (Ex: CDH��8��).



U.d.r.o.

s.o.G.s.*

20" flankers

8'-0 9/16"7'-11"

1'-8" | 4'-4" | 1'-8"16" | 48 1/2" | 16"

8'-8 9/16"8'-7"

1'-8" | 5'-0" | 1'-8"16" | 56 1/2" | 16"

4'-5

3/1

6"4'

-5 1

1/16

"4'

-2"

22"

| 45

1/4"

4'-9

3/1

6"4'

-9 1

1/16

"4'

-6"

24"

| 49

1/4"

DH30-16224442 DH30-16225042

DH30-16244446 DH30-16245046

8'-7 9/16"8'-5 15/16"

2'-0" | 4'-4" | 2'-0"20" | 48 1/2" | 20"

9'-3 9/16"9'-1 5/16"

2'-0" | 5'-0" | 2'-0"20" | 56 1/2" | 20"

5'-5

3/1

6"5'

-5 1

1/16

"5'

-2"

28"

| 57

1/4"

DH30-20224442 DH30-20225042

DH30-20244446 DH30-20245046

DH30-20285052

UNIT PROJECTION: UNIT PROJECTION:13 7/16" 15 3/8"

Double Hungs – 30° Bay Windows16" flankers


d O u b l e H u n G s 3 0 ° b ay w i n d O w s

1�" flankers �0" flankers

20" flankersDouble Hungs – 45° Bay Windows16" flankers

U.d.r.o.

s.o.G.s.*

4'-5

3/1

6"4'

-5 1

1/16

"4'

-2"

22"

| 45

1/4"

4'-9

3/1

6"4'

-9 1

1/16

"4'

-6"

24"

| 49

1/4"

5'-5

3/1

6"5'

-5 1

1/16

"5'

-2"

28"

| 57

1/4"

7'-8 1/4"7'-4 7/8"

1'-8" | 4'-4" | 1'-8"16" | 48 1/2" | 16"

8'-4 1/4"8'-0 7/8"

1'-8" | 5'-0" | 1'-8"16" | 56 1/2" | 16"

DH45-16224442 DH45-16225042

DH45-16244446 DH45-16245046

8'-1 15/16"7'-10 1/2"

2'-0" | 4'-4" | 2'-0"20" | 48 1/2" | 20"

8'-9 15/16"8'-6 1/2"

2'-0" | 5'-0" | 2'-0"20" | 56 1/2" | 20"

DH45-20224442 DH45-20225042

DH45-20244446 DH45-20245046

DH45-20285052

UNIT PROJECTION: UNIT PROJECTION: 18 7/8" 21 3/4"

d O u b l e H u n G s 4 5 ° b ay w i n d O w s

1�" flankers �0" flankers NOTES:




If the cable support system and/or insulated platforms & supportbrackets are not being used, other means of proper support mustbe used. Add 1-1�/1�" to the R.O. height if an insulated platformis being used. R.O.’s for bay units without head and seat boards, typically used for walk-out applications, are different.




* The first number of the glass size height is the height (per sash) for each flanker sash. The second number is the glassheight for the center picture unit.

PRODUCT CODES:

To order units, add “C” before the product number

(Ex: CDH��-�0�8�0��).

U.D. = Unit Dimension


S.O. = Sash Opening

G.S. = Glass Size



UNIT DIMENSION WIDTH & FRAME WIDTH

3 1/4"

1/4"

ROUGH OPENING WIDTH

3 1/4" D.L.O.

1/4"

JamBs

Traditional Double Hung Cross Section Drawings

Clad Vertical Section

siLL

Head

4 9/16"

3 3/

16"

RO

UG

H O

PE

NIN

G H

EIG

HT

FR

AM

E &

UN

IT D

IME

NS

ION

HE

IGH

T

2 1/

4"D

.L.O

.

1 5/16"

D.L

.O.

5"

9/16"

3 11/64"

1 7/8"

5 7/8"

1 5/16"

traditiOnal dOuble HunG CrOss seCtiOn drawinGs

Vertical Section

Horizontal Section


3 1/4"

1/4"

ROUGH OPENING WIDTH

3 1/4" D.L.O.

1/4"

JamBs

Traditional Double Hung Cross Section Drawings


siLL

Head

4 9/16"

3 3/

16"

RO

UG

H O

PE

NIN

G H

EIG

HT

FR

AM

E &

UN

IT D

IME

NS

ION

HE

IGH

T

2 1/

4"D

.L.O

.

1 5/16"

D.L

.O.

5"

9/16"

3 11/64"

1 7/8"

5 7/8"

1 5/16"



Double Hung Studio Unit Cross Section Drawings

Traditional Clad

Standard Narrow Mullions

Clad Double Hung

Rectangular Transoms Stacked over Double Hungs

Clad

6 7/

16"

2 5/

8"

SUPPLIED BY OTHERS

6 1/2"

FR

AM

E W

TH

.F

RA

ME

HT.

Head

FR

AM

E H

T.

JamB

siLL

1 5/16"

5"D

.O.

3 15/32"

D.O

.

1 7/32"

D.O

.3

15/6

4"

5 7/8"

4 9/16"

1 7/32"

3"

5 7/8"

4 9/16"

dOuble HunG studiO unit CrOss seCtiOn drawinGs

Standard Narrow Mullions

Rectangular Transoms Stacked over Traditional Double Hungs




Traditional WoodTraditional Clad

Standard Narrow Mullions Optional Support Mullions

8 1/2"

2" SUPPLIED BY OTHERS

Clad Double Hung Clad Double Hung

SUPPLIED BY OTHERS

Wood Double Hung Wood Double Hung

Rectangular Transoms Stacked over Double Hungs Double Hung Transoms with Optional Beveled Sills

Clad Wood Clad Wood6

7/16

"

2 5/

8"

6 7/

16"

2 5/

8"

6 1/2"

SUPPLIED BY OTHERS

6 1/2"8 1/2"


Sterling Wood

siLL

1/4"

JamB

D.O

.4

61/6

4"F

RA

ME

HT

.D

.O.

3 1/8"

FR

AM

E W

TH

.3"

FR

AM

E H

T.

D.O

.3

7/32

"9/

16"

4 9/16"

5 5/8"

1 9/16"

1 9/16"

4 9/16"

5 5/8"Head

FR

AM

E W

TH

.F

RA

ME

HT

.

Head

FR

AM

E H

T.

JamB

siLL

1 5/16"

5"D

.O.

3 15/32"

D.O

.

1 7/32"

D.O

.3

15/6

4"

5 7/8"

4 9/16"

1 7/32"

3"

5 7/8"

4 9/16"

Head

JamB

siLL

FR

AM

E W

TH

.F

RA

ME

HT

.4

15/1

6"D

.O.

3 27/64"

D.O

.3"

FR

AM

E H

T.

3 15

/64"

D.O

.

5 5/8"4 9/16"

4 9/16"

1 7/32"

1 7/32"

5 5/8"


Traditional WoodTraditional Clad

Standard Narrow Mullions Optional Support Mullions

8 1/2"


Clad Double Hung Clad Double Hung

SUPPLIED BY OTHERS

Wood Double Hung Wood Double Hung

Rectangular Transoms Stacked over Double Hungs Double Hung Transoms with Optional Beveled Sills

Clad Wood Clad Wood

6 7/

16"

2 5/

8"

6 7/

16"

2 5/

8"

6 1/2"

SUPPLIED BY OTHERS

6 1/2"8 1/2"


Sterling Wood

siLL

1/4"

JamB

D.O

.4

61/6

4"F

RA

ME

HT

.D

.O.

3 1/8"

FR

AM

E W

TH

.3"

FR

AM

E H

T.

D.O

.3

7/32

"9/

16"

4 9/16"

5 5/8"

1 9/16"

1 9/16"

4 9/16"

5 5/8"Head

FR

AM

E W

TH

.F

RA

ME

HT

.

Head

FR

AM

E H

T.

JamB

siLL

1 5/16"

5"D

.O.

3 15/32"

D.O

.

1 7/32"

D.O

.3

15/6

4"

5 7/8"

4 9/16"

1 7/32"

3"

5 7/8"

4 9/16"

Head

JamB

siLL

FR

AM

E W

TH

.F

RA

ME

HT

.4

15/1

6"D

.O.

3 27/64"

D.O

.3"

FR

AM

E H

T.

3 15

/64"

D.O

.

5 5/8"4 9/16"

4 9/16"

1 7/32"

1 7/32"

5 5/8"

Traditional






JamBs

UN

IT P

RO

JEC

TIO

N

30˚

ROUGH OPENING WIDTH

Wood

CladJamBs

Double Hung �0 & �� Bay Vertical Cross Section Drawings

Clad Wood

Double Hung �0 Bay Horizontal Cross Section DrawingsU

NIT

PR

OJE

CT

ION

ROUGH OPENING WIDTH

30˚

Head

UNIT PROJ.

K & K INSULATED PLATFORM


1 11/16"

K & K SUPPORT BRACKET

siLL

BY OTHERS

RO

UG

H O

PE

NIN

G H

T.

FR

AM

E &

UN

IT D

IME

NS

ION

HT

.

1 9/16"9/16"

Head

BY OTHERS


UNIT PROJ.



siLL

EXTERIOR TRIM CAP, TO BE SUPPLIED BY OTHERS FOR (NON) KOLBE

INSULATING PLATFORM.

3 15

/16"

1/2"

4 31

/32

FR

AM

E H

EIG

HT

UN

IT D

IME

NS

ION

HE

IGH

T

RO

UG

H O

PE

NIN

G

D.L

.O.

9/16"

dOuble HunG 30° & 45° bay vertiCal CrOss drawinGs

dOuble HunG 30° bay HOrizOntal CrOss seCtiOn drawinGs



JamBs

UN

IT P

RO

JEC

TIO

N

30˚

ROUGH OPENING WIDTH

Wood

CladJamBs

Double Hung �0 & �� Bay Vertical Cross Section Drawings

Clad Wood

Double Hung �0 Bay Horizontal Cross Section Drawings

UN

IT P

RO

JEC

TIO

N

ROUGH OPENING WIDTH

30˚

Head

UNIT PROJ.



1 11/16"


siLL

BY OTHERS

RO

UG

H O

PE

NIN

G H

T.

FR

AM

E &

UN

IT D

IME

NS

ION

HT

.

1 9/16"9/16"

Head

BY OTHERS


UNIT PROJ.



siLL

EXTERIOR TRIM CAP, TO BE SUPPLIED BY OTHERS FOR (NON) KOLBE

INSULATING PLATFORM.

3 15

/16"

1/2"

4 31

/32

FR

AM

E H

EIG

HT

UN

IT D

IME

NS

ION

HE

IGH

T

RO

UG

H O

PE

NIN

G

D.L

.O.

9/16"

Wood

Clad

Double Hung �� Bay Horizontal Cross Section Drawings

ROUGH OPENING WIDTH



UN

IT P

RO

JEC

TIO

N

45˚

ROUGH OPENING WIDTH

UN

IT P

RO

JEC

TIO

N

45˚

dOuble HunG 45° bay HOrizOntal CrOss seCtiOn drawinGs

�8 ClassiC series9� Kolbe winDows & Doors


sliDers Double sliDers

triple sliDers


NOTES:



** Fiberglass mesh screen cloth in a charcoal color will be used unless aluminum mesh is requested.

Aluminum mesh is available in either an aluminum or charcoal color.

s l i d e r s ta n d a r d F e at u r e s

➢ 1-�/8" thick sash

➢ 9/1�" H°K LoE�-�70 insulating glass*

➢ Overall jamb width is �-9/1�" (basic box width is �-9/1�")

➢ Constructed of pine, with pine interior stops




➢ Rigid PVC waterseal at the sill


➢ Clay-colored heavy duty sash locks

➢ Machined finger grooves on the outermost stiles

➢ Beige extruded vinyl head and sill tracks with compression foam

backing on the head track



➢ H°K LoE� -��*➢ Patterned-, bronze- or gray-lite➢ Tempered or laminated➢ Other options standard to the industry

Gr i l l e s :➢ Grilles-in-the-airspace➢ Interior removable wood grilles with 7/8" or 1-1/8" bars and full surrounds➢ PDL with �/8", 7/8", 1-1/8", 1-�/�" or �-1/�" bars

ot h e r op t i o n s: ➢ Other wood species➢ Ovolo profile glazing beads and interior grille bars➢ Interior prefinishing➢ Interior casing➢ Prep for stool➢ Sash locks in White, Beige, Brass and custom finishes listed above➢ Full screens with aluminum frames in exterior clad colors and fiberglass mesh**➢ StormGuard combination storm/screen units➢ Extension jambs (up to 1�" applied, over 1�" shipped loose for field application)

s l i d e r O p t i O n a l F e at u r e s

h a r D wa r e

Clay-colored cam locks are factory-applied to slider units as

standard. Standard slider hardware is also available in White,

Beige and Brass. Custom finishes for slider sash locks include

Antique Brass, Satin Nickel, Antique Nickel, Matte Black and

Rustic Umber.

C l a s s i C s e r i e s s l i d e r s


Clay (standard) White Beige

�0 ClassiC series


F.S. to S.O. -1 1/�" -1 1�/1�"R.O. to G.S. -7"÷� -7 �/8"G.S. to D.L.O. -1" -1"note: Clear opening dimensions can be found on pg. 101.

F.S. = Frame Size • G.S. = Glass Size • S.O. = Sash OpeningR.O. = Rough Opening • D.L.O. = Daylight Opening


3'-2 1/2"3'-3"3'-1"

16" | 16"

3'-10 1/2"3'-11"3'-9"

20" | 20"

5'-10 1/2"5'-11"5'-9"

32" | 32"

4'-6 1/2"4'-7"4'-5"

24" | 24"

5'-2 1/2"5'-3"5'-1"

28" | 28"

F.s.r.o.

s.o.G.s.

Double sliders

1'-1

0 13

/16"

1'-1

1 3/

8"1'

-9"

16"

2'-2

13/

16"

2'-3

3/8

"2'

-1"

20"

2'-6

13/

16"

2'-7

3/8

"2'

-5"

24"

2'-1

0 13

/16"

2'-1

1 3/

8"2'

-9"

28"

3'-2

13/

16"

3'-3

3/8

"3'

-1"

32"

3'-6

13/

16"

3'-7

3/8

"3'

-5"

36"

3'-1

0 13

/16"

3'-1

1 3/

8"3'

-9"

40"

4'

-2 1

3/16

"4'

-3 3

/8"

4'-1

"44

"

4'-6

13/

16"

4'-7

3/8

"4'

-5"

48"

SL1616 SL2016 SL2416 SL3216SL2816

SL1620 SL2020 SL2420 SL3220SL2820

SL1624 SL2024 SL2424 SL3224*SL2824

SL1628 SL2028 SL2428 SL3228*SL2828*

SL1632 SL2032 SL2432 SL3232*SL2832*

SL1636 SL2036 SL2436* SL3236*SL2836*

SL1640 SL2040 SL2440* SL3240*SL2840*

SL1644 SL2044 SL2444* SL3244*SL2844*

SL1648 SL2048 SL2448* SL3248*SL2848*

t r a d i t i O n a l d O u b l e s l i d e r s

NOTES:


Grilles are optional. Follow chart down from top row and across from left column to determine grilleconfigurations.


The side jambs of slider units extend above the head jamb; additional space for the rough opening height may be necessary.


PRODUCT CODES:

To order units, add “C” before the product number (Ex: CSL��8).


wiDth heiGht



F.s.r.o.

s.o.G.s.

triple sliders

5'-11 1/2"6'-0"5'-10"

16" | 31 1/2" | 16"

7'-3 1/2"7'-4"7'-2"

20" | 39 1/2" | 20"

7'-11 1/2"8'-0"7'-10"

20" | 47 1/2" | 20"

8'-7 1/2"8'-8"8'-6"

24" | 47 1/2" | 24"

3'-2

13/

16"

3'-3

3/8

"3'

-1"

31 1

/2"

3'-1

0 13

/16"

3'-1

1 3/

8"3'

-9"

39 1

/2"

4'-2

13/

16"

4'-3

3/8

"4'

-1"

43 1

/2"

4'-6

13/

16"

4'-7

3/8

"4'

-5"

47 1

/2"

TSL163232 TSL204032 TSL244832*TSL204832

TSL163240 TSL204040* TSL244840*TSL204840*

TSL163244 TSL204044* TSL244844*TSL204844*

TSL163248 TSL204048* TSL244848*TSL204848*

C l a s s i C t r i p l e s l i d e r s

Traditional Double Slider Cross Section Drawings

Clad Vertical Section Clad Horizontal Section Wood Vertical Section Wood Horizontal Section

Royal Double Slider Cross Section Drawings

Wood Vertical Section Wood Horizontal Section

Royal Triple Slider Horizontal Cross Section Drawings

Clad Wood

D.L.O. 3 1/8"2 3/8"2 3/8"3 1/8" D.L.O.D.L.O.

1/4"UNIT DIMENSION WIDTH & FRAME WIDTH

ROUGH OPENING WIDTH

1/4"

JamBs

D.L.O. D.L.O. 3 1/8"2 3/8"2 3/8" D.L.O.3 1/8"

1 1/8"

1/4"1/4"


ROUGH OPENING WIDTH

FRAME WIDTH

1/4"1/4" FRAME & UNIT DIM. WIDTH

ROUGH OPENING WIDTH

3 1/8" D.L.O. 2 1/4"

JamBs

D.L.O. 3 1/8"

1 3/16"

1/4"


ROUGH OPENING WIDTH

FRAME WIDTH

JamBs

D.L.O.3 1/8" 2 1/4" 3 1/8"

1/4"

1 3/16"

1/4"


ROUGH OPENING WIDTH

FRAME WIDTH

JamBs

D.L.O.3 1/8" 2 3/8" 3 1/8"

1/4"

D.L.O.

D.L.O.

JamBs

FR

AM

E &

UN

IT D

IME

NS

ION

HT

.4

17/3

2"

SILL

D.L

.O.

3 5/

16"

Head

1 5/16"

2 59/64"1 5/8"

5 7/8"

4 9/16"

1 5/16"

Head

siLL

9/16"

3 5/

16"

4 1/

2"

UN

IT D

IME

NS

ION

HE

IGH

TR

OU

GH

OP

EN

ING

HE

IGH

TF

RA

ME

HE

IGH

T

D.L

.O.

1/2"

1 5/8"2 57/64"

4 9/16"

5 5/8"

1 5/16"

Head

siLL

2 59/64"

UN

IT D

IME

NS

ION

HE

IGH

TR

OU

GH

OP

EN

ING

HE

IGH

T

4 1/

2"

1/2"

FR

AM

E H

EIG

HT

D.L

.O.

3 5/

16"

1 5/8"

5 5/8"

4 9/16"

9/16"

1 5/16"

traditiOnal dOuble slider CrOss seCtiOn drawinGs

Vertical Section Horizontal Section

ClassiC triple slider HOrizOntal CrOss seCtiOn drawinGs

Drawings not to scale.Additional and the most current drawings are available after registration and sign-on at www.kolbe-kolbe.com

See notes on previous page for additional information.

ROUGH OPENING WIDTH

UNIT DIMENSION & FRAME WIDTH

D.L.O. D.L.O. D.L.O.3 1/8" 3 1/8"2 1/4" 2 1/4"

1/4" 1/4"

�� ClassiC series�8 Kolbe winDows & Doors

patio Doorsviewport sliDinG patio Doors

GarDen-aire sliDinG patio Doors

inswinG patio Doors

patio Door transoms


v i e w p O r t s ta n d a r d F e at u r e s

➢ Standard jamb width is �-9/1�" on units

➢ 1-�/�" thick sash panels

➢ �" wide LVL stiles and rails

➢ Constructed of pine, with pine interior stops



➢ Tempered, 7/8" H°K LoE�-�70 insulating glass*



➢ Tandem rollers with adjustable, ball-bearing wheels carry

the sliding panel

➢ Rustic-colored handle set and mortise latch

➢ Screens with fiberglass mesh and all-aluminum, roll-formed frames

to coordinate with exterior clad colors

➢ Active/Fixed or Fixed/Active operation

➢ Mill-finish extruded aluminum sill with a vinyl thermal break


NOTES:



C l a s s i C s e r i e s v i e w p O r t

Gl a s s: (all door glass is tempered)

➢ H°K LoE� -��0*

➢ H°K LoE� -��*

➢ Patterned-, bronze- or gray-lite


➢ Interior removable wood grilles with 1-1/8" bars and full surrounds

ot h e r op t i o n s: ➢ Ovolo profile glazing beads and interior grille bars

➢ Handle set and mortise latch in White

➢ Screens with aluminum mesh

➢ Extension jambs in a variety of sizes (shipped loose for field application)

➢ Frame setup

➢ Keyed lock

➢ Secondary security lock

v i e w p O r t O p t i O n a l F e at u r e s

NOTE: All measurements are nominal.


h a r D wa r e

A rustic-colored handle set is included with the Viewport sliding patio

door for field installation. It is also available in White. The mortise

latch is factory installed. A keyed lock or a secondary security lock is

also available.


Interior view Exterior view


C l a s s i C s e r i e s G a r d e n - a i r e s l i d i n G p at i O d O O r

G a r d e n - a i r e s ta n d a r d F e at u r e s

➢ 1-�/�" thick sash

➢ Standard jamb width is �-9/1�"

➢ Frame setup

➢ �" wide LVL stiles and rails

➢ Constructed of pine, with pine interior stops and wood

mull casings on mulled units





➢ Tandem rollers with adjustable, ball-bearing wheels carry the

sliding panel

➢ Rustic-colored handle set and mortise latch

➢ Screens with fiberglass mesh and all aluminum frames to

coordinate with exterior clad colors

➢ One-piece, pultruded fiberglass sill with continuous aluminum sill

nosing and fiberglass sill filler

➢ Thick oak interior threshold


NOTES:




Gl a s s: (all door glass is tempered)➢ H°K LoE� -��0*

➢ H°K LoE� -��*➢ Patterned-, bronze- or gray-lite➢ Laminated glass➢ Other options standard to the industry

Gr i l l e s :➢ Grilles-in-the-airspace➢ Interior removable wood grilles with 1-1/8" bars and full surrounds➢ PDL with �/8", 7/8", 1-1/8", 1-�/�" or �-1/�" bars

ot h e r op t i o n s: ➢ Other wood species➢ Ovolo profile glazing beads and interior grille bars➢ Interior prefinishing➢ Interior casing➢ Handle set and mortise latch in White➢ Keyed lock➢ Secondary security lock➢ Screens with aluminum mesh ➢ Extension jambs in a wide variety of sizes (shipped loose for field application)

G a r d e n - a i r e O p t i O n a l F e at u r e s

h a r D wa r e

A Rustic-colored handle set is included with the Garden-Aire

sliding patio door for field installation. It is also available in White.

The mortise latch is factory installed. A keyed lock or a secondary

security lock is also available.

Interior view Exterior view



➢ H°K LoE� -��0*



➢ Interior removable wood grilles with 1-1/8" bars and full surrounds➢ PDL with �/8", 7/8", 1-1/8", 1-�/�" or �-1/�" bars

ot h e r op t i o n s: ➢ Ovolo profile glazing beads and interior grille bars➢ Interior prefinishing➢ Interior casing➢ Toronto or München handle set in Bright Brass, Antique Brass, Satin Nickel, Antique Nickel, Matte Black, Rustic Umber or Oil-rubbed finishes

➢ �-point flush bolt lock on less active panel of French doors➢ Single-point locking system➢ Adjustable, �"x�-�/8" hinges with �/8" radius corners in Bright Brass, Antique Brass, Stainless Steel, Satin Nickel, Antique Nickel, Matte Black, Rustic Umber and Oil-rubbed finishes➢ Non-adjustable, residential, �"x�" ball-bearing hinges with 1/�" radius corners in Bright Brass, Antique Brass, Stainless Steel, Satin Nickel, Antique Nickel, Matte Black and Oil-rubbed finishes➢ Non-adjustable, commercial-grade, �"x�" ball-bearing hinges with square corners in Bright Brass, Antique Brass, Stainless Steel, and Oil-rubbed finishes➢ Non-adjustable, commercial-grade, �-1/�"x�-1/�" hinges in Bright Brass and Oil-rubbed finishes➢ Self-closing, swinging screen includes a spring-loaded lock, fiberglass mesh, and aluminum screen frame to coordinate with exterior clad colors➢ Screens with aluminum mesh➢ Factory-applied extension jambs in a variety of sizes.➢ Thermal handicap sill

i n s w i n G p at i O d O O r s ta n d a r d F e at u r e s

➢ 1-�/�" thick sash panel prehung in the 1-�/1�" frame


➢ LVL locking stiles; stiles and top rails are a nominal �-�/8" wide;

bottom rail is a nominal 7-9/1�" wide

➢ Constructed of pine, with pine interior stops and wood

mull casings on mulled units






➢ Toronto handle set in a Bright Brass finish

➢ HLS 9000 stainless steel multi-point locking hardware on single

door panels, French doors have a �-point lock on the active panel

and a �-point lock on the less active panel

➢ Adjustable, �"x�-�/8" hinges with �/8" radius corners in a

Gold-painted finish

➢ “Ultra” sliding screens with fiberglass mesh and extruded

aluminum frames to coordinate with exterior clad colors

➢ Bronze-anodized aluminum, self-draining Waterguard™ exterior

sill with an oak interior threshold


NOTES:




Toronto München

C l a s s i C s e r i e s i n s w i n G p at i O d O O r

i n s w i n G p at i O d O O r O p t i O n a l F e at u r e s

h a r D wa r e

As standard, inswing patio doors feature Gold-painted adjustable hinges and a Toronto handle set in Bright Brass. Optional handle sets and hinges are listed below in Optional Features. For a complete visual list, see pg. 77 in the Entrance Door section.

(shown in Bright Brass)


NOTES:


Operation is viewed from the exterior.

Grilles are optional. The grille configuration shown for a single panel is typical for each panel.


PRODUCT CODES:

To order units, add “KC” before the product number (Ex: KC�0�8).

F.S. = Frame Size • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per panel.)

F.s.r.o.

G.s.

Viewport Patio Doors

6'-1

0 1/

2"6'

-11"

75 9

/16"

3'-5 1/4"3'-5 3/4"

34"

6'-5 1/2"6'-6"34"

9'-10 3/4"9'-11 1/4"

34"

3068 6068 9068

SIDELITE


v i e w p O r t p at i O d O O r s


F.S. to Panel O.S.M. +1/�"÷� -� 1/�"Panel O.S.M. to G.S. -�" -� 11/1�"G.S. to D.L.O. -1" -1"note: Clear opening dimensions can be found on pg. 101.


wiDth heiGht




Viewport with Sidelite – Clad Horizontal Section

Clad Horizontal Section

Standard Viewport Cross Section Drawings

4 1/16"

1/4" UNIT DIM. WIDTH & FRAME WIDTH

ROUGH OPENING WIDTH

4 1/8"

3 3/8" D.L.O.D.L.O.

D.L.O. D.L.O.D.L.O. 3 3/8"

4 1/16"

JamBs

4 1/16"

1/4"

1/4" UNIT DIMENSION WIDTH & FRAME WIDTH

ROUGH OPENING WIDTH

1/4"8 3/16"

JamBs WitH sideLite

3 3/

4"

siLL

Head

FR

AM

E &

UN

IT D

IME

NS

ION

HE

IGH

T

D.L

.O.

4 3/

16"

1 7/32"

1 9/16"

4 9/16"

5 7/8"

standard viewpOrt CrOss seCtiOn drawinGs




Viewport with Sidelite – Clad Horizontal Section

Clad Horizontal Section

Standard Viewport Cross Section Drawings

4 1/16"

1/4" UNIT DIM. WIDTH & FRAME WIDTH

ROUGH OPENING WIDTH

4 1/8"

3 3/8" D.L.O.D.L.O.

D.L.O. D.L.O.D.L.O. 3 3/8"

4 1/16"

JamBs

4 1/16"

1/4"

1/4" UNIT DIMENSION WIDTH & FRAME WIDTH

ROUGH OPENING WIDTH

1/4"8 3/16"

JamBs WitH sideLite

3 3/

4"

siLL

Head

FR

AM

E &

UN

IT D

IME

NS

ION

HE

IGH

T

D.L

.O.

4 3/

16"

1 7/32"

1 9/16"

4 9/16"

5 7/8"

Viewport with Sidelite - Horizontal Section

�8 ClassiC series

2866 41166 7766 51166 711669166 121663266 4266

F.S.R.O.

G.S.

6'-7

15/

16"

6'-8

7/1

6"72

1/2

"

2'-8"2'-8 1/2"24 3/4"

4'-11"4'-11 1/2"

24 3/4"

7'-7"7'-7 1/2"24 3/4"

3'-2"3'-2 1/2"30 3/4"

5'-11"5'-11 1/2"

30 3/4"

9'-1"9'-1 1/2"30 3/4"

4'-2"4'-2 1/2"42 3/4"

7'-11"7'-11 1/2"

43 3/4"

12'-1"12'-1 1/2"

43 3/4"

SIDELITE SIDELITE SIDELITE

G a r d e n - a i r e s l i d i n G p at i O d O O r s r e m O d e l i n G s i z e s

2968 5068 6068 6668

8068

7968 10068

12368

2980 5080 6080 6680

8080

7980 10080

12380

9368

9380

4368

4380

3668

3680

3368

3380

F.S.R.O.

G.S.

6'-1

0 7/

16"

6'-1

0 15

/16"

75"

8'-2

7/1

6"8'

-2 1

5/16

"91

"

2'-8 1/2"2'-9"

25 1/4"

5'-0"5'-0 1/2"25 1/4"

7'-8 1/2"7'-9"

25 1/4"

3'-2 1/2"3'-3"

31 1/4"

3'-5 1/2"3'-6"

34 1/4"

6'-0"6'-0 1/2"31 1/4"

6'-6"6'-6 1/2"34 1/4"

9'-2 1/2"9'-3"

31 1/4"

9'-11 1/2"10'-0"34 1/4"

F.S.R.O.

G.S.

4'-2 1/2"4'-3"

43 1/4"

8'-0"8'-0 1/2"43 1/4"

12'-2 1/2"12'-3"43 1/4"

6'-1

0 7/

16"

6'-1

0 15

/16"

75"

8'-2

7/1

6"8'

-2 1

5/16

"91

"

SIDELITE

SIDELITE

SIDELITE

SIDELITE SIDELITE

SIDELITE SIDELITE


G a r d e n - a i r e s l i d i n G p at i O d O O r s

NOTES:


Operation is viewed from the exterior. Standard operation is shown. Please specify if other operation configurations are needed.

Grilles are optional. The grille configuration shown for a single panel is typical for each panel.


PRODUCT CODES:

To order units, add “GAC” before the product number (Ex: GAC-1��8).





F.S. to Panel O.S.M. +1/�"÷� -� �/�"Panel O.S.M. to G.S. -�" -� 11/1�"G.S. to D.L.O. -1" -1"notes:Clear opening dimensions can be found on pg. 101.


2910

2914

2916

3310

3314

3316

2918 3318

2920 3320

2926 3326 4326

4320

4318

4316

4314

4310 5010

5014

5016

5018

5020

5026 6026

6020

6018

6016

6014

6010 8010

8014

8016

8018

8020

8026

2'-8 1/2"2'-9"

25 1/4"

3'-2 1/2"3'-3"

31 1/4"

4'-2 1/2"4'-3"

43 1/4"

5'-0"5'-0 1/2"52 3/4"

F.s.r.o.

G.s.

11 1

/2"

1'-0

"4

1/4"

1'-3

1/2

"1'

-4"

8 1/

4"

1'-5

1/2

"1'

-6"

10 1

/4"

1'-7

1/2

"1'

-8"

12 1

/4"

1'-1

1 1/

2"2'

-0"

16 1

/4"

2'-5

1/2

"2'

-6"

22 1

/4"

Garden-Aire Rectangular Transoms

6'-0"6'-0 1/2"64 3/4"

8'-0"8'-0 1/2"88 3/4"

3610

3614

3616

3618

3620

3626

3'-5 1/2"3'-6"

34 1/4"

6626

6620

6618

6616

6614

6610

6'-6"6'-6 1/2"70 3/4"

G a r d e n - a i r e r e C ta n G u l a r t r a n s O m s

NOTES:


Rectangular transom units are sash set as standard. The units shown are stand-alone units. Adjustments may be required when stacking overother units; adjustments will be made in the factory.

Grille configurations must be specified when ordering.


PRODUCT CODES:

To order transoms, add “GACT” before the product number (Ex: GACT�910).


wiDth heiGht

70 ClassiC series

standard Garden-aire CrOss seCtiOn drawinGs


Garden-Aire with Sidelite - Horizontal Section

reCtanGular transOms staCKed Over Garden-aire dOOrs



5 7/

8"

4 9/

16"

5 7/8"

4 9/16"

1 9/16"

4 1/8"

D.L.O. 3 3/8" D.L.O.

4 1/8"

1 9/16"


ROUGH OPENING WIDTH

JAMBS

4 9/16"

1 3/4"4

3/16

"

D.L

.O.

4 1/

4"

HEAD

SILL

UN

IT D

IME

NS

ION

HE

IGH

T &

FR

AM

E H

EIG

HT

1 3/16"

RO

UG

H O

PE

NIN

G H

EIG

HT

5 7/8"

4 1/8" 4 1/8"D.L.O.D.L.O.D.L.O. 3 5/16" 8 1/4"

1/4" 1/4"

OPER. STAT. STAT.

ROUGH OPENING WIDTH


5 7/

8"

4 9/

16"

5 7/8"

4 9/16"

1 9/16"

4 1/8"

D.L.O. 3 3/8" D.L.O.

4 1/8"

1 9/16"


ROUGH OPENING WIDTH

JAMBS

4 9/16"

1 3/4"4

3/16

"

D.L

.O.

4 1/

4"

HEAD

SILL

UN

IT D

IME

NS

ION

HE

IGH

T &

FR

AM

E H

EIG

HT

1 3/16"

RO

UG

H O

PE

NIN

G H

EIG

HT

5 7/8"

4 1/8" 4 1/8"D.L.O.D.L.O.D.L.O. 3 5/16" 8 1/4"

1/4" 1/4"

OPER. STAT. STAT.

ROUGH OPENING WIDTH


5 7/

8"

4 9/

16"

5 7/8"

4 9/16"

1 9/16"

4 1/8"

D.L.O. 3 3/8" D.L.O.

4 1/8"

1 9/16"


ROUGH OPENING WIDTH

JAMBS

4 9/16"

1 3/4"

4 3/

16"

D.L

.O.

4 1/

4"

HEAD

SILL

UN

IT D

IME

NS

ION

HE

IGH

T &

FR

AM

E H

EIG

HT

1 3/16"

RO

UG

H O

PE

NIN

G H

EIG

HT

5 7/8"

4 1/8" 4 1/8"D.L.O.D.L.O.D.L.O. 3 5/16" 8 1/4"

1/4" 1/4"

OPER. STAT. STAT.

ROUGH OPENING WIDTH


3 7/

16"

8 3/

8"



F.s.r.o.

G.s.

inswing Patio Door

2'-6 1/4"2'-6 3/4"20 5/16"

4'-11 7/16"4'-11 15/16"

20 5/16"

7'-4 5/8"7'-5 1/8"20 5/16"

6'-7

1/2

"6'

-8"

65 1

1/16

"

7'-1

1 5/

8"8'

-0 1

/8"

81 2

5/32

"

2666 41166AS

2680 41180AS

4'-11 7/16"4'-11 15/16"

20 5/16"

41166SA

41180SA

7566SASR

7580SASR

ACT ACTSTAT ACTSTAT STAT

7'-4 5/8"7'-5 1/8"20 5/16"

7566SASL

7580SASL

ACTSTAT STAT

ACTSTAT STAT ACTSTAT STAT

STAT

ACT ACTSTAT STAT

3'-0 1/4"3'-0 3/4"26 5/16"

3066

3080

5'-11 7/16"5'-11 15/16"

26 5/16"

51166AS

51180AS

ACT STAT

5'-11 7/16"5'-11 15/16"

26 5/16"

51166SA

51180SA

ACTSTAT

ACT STAT ACTSTAT

8'-10 5/8"8'-11 1/8"26 5/16"

81166SASR

81180SASR

8'-10 5/8"8'-11 1/8"26 5/16"

81166SASL

81180SASL

ACTSTAT STAT

ACTSTAT STAT

ACTSTAT STAT

ACTSTAT STAT

i n s w i n G p at i O d O O r s

NOTES:


Grilles are optional. The grille configuration shown for a single panel is typical for each panel in the unit.


PRODUCT CODES:

To order units, add “SPC” before the product number (Ex: SPC81180SASL).

When ordering single units, specify stationary, hinged left or hinged right. Operation is viewed from the interior.



F.S. to Panel O.S.M. (1-wide, active) -1 1�/1�" -� ��/��" (1-wide, stationary) -1 �/�" -� ��/��" (�-wide) -� 9/1�"÷� -� ��/��" (�-wide) -� �/1�"÷� -� ��/��"

Panel O.S.M. to G.S. -8 1/8" -11 �/��"G.S. to D.L.O. -1" -1"note: Clear opening dimensions can be found on pg. 101.


wiDth heiGht

7� ClassiC series

F.s.r.o.

G.s.

inswing Patio Door – French Door

4'-11 7/16"4'-11 15/16"

20 5/16"

5'-11 7/16"5'-11 15/16"

26 5/16"

6'-7

1/2

"6'

-8"

65 1

1/16

"

7'-1

1 5/

8"8'

-0 1

/8"

81 2

5/32

"

51166AL41166AL

51180AL41180AL

4'-11 7/16"4'-11 15/16"

20 5/16"

41166AR

41180AR

ACT INACT INACT INACT INACTACT

5'-11 7/16"5'-11 15/16"

26 5/16"

51166AR

51180AR

ACTACT

ACT INACT INACT INACT INACTACT ACTACT

2'-6"2'-6 1/2"24 1/2"

3'-0"3'-0 1/2"30 1/2"

4'-11 3/16"4'-11 11/16"

53 11/16"

5'-11 3/16"5'-11 11/16"

65 11/16"

inswing Rectangular transoms

F.s.r.o.

G.s.

0'-1

1 1/

2"1'

-0"

6"

1'-3

1/2

"1'

-4"

10"

1'-5

1/2

"1'

-6"

12"

1'-7

1/2

"1'

-8"

14"

1'-1

1 1/

2"2'

-0"

18"

2'-5

1/2

"2'

-6"

24"

2610 3010 41110 51110

2614 3014 41114 51114

2616 3016 41116 51116

2618 3018 41118 51118

2620 3020 41120 51120

2626 3026 41126 51126

i n s w i n G p at i O d O O r s F r e n C H d O O r s

i n s w i n G r e C ta n G u l a r t r a n s O m s

NOTES:


Grilles are optional. The grille configuration shown for a single panel istypical for each panel in the unit.



PRODUCT CODES:

To order French doors, add “SPC” before the product number

(Ex: SPC�1180AR).

Operation is viewed from the interior.

F.S. = Frame Size • R.O. = Rough Opening

G.S. = Glass Size (Glass sizes are shown per panel.)

NOTES:


Rectangular transom units are sash set as standard.

The units shown are stand-alone units. Adjustments may be requiredwhen stacking over other units; adjustments will be made in the factory.




PRODUCT CODES:

To order transoms, add “SPCT” before the product number

(Ex: SPCT��10).





Standard Classique Cross Section Drawings

Clad Vertical Section Clad Horizontal Section


1 1/8"

5 17/32"5 13/32" D.L.O.

1/4" 1/4"

ROUGH OPENING WIDTH

FRAME WIDTH


D.L.O. 5 17/32"5 13/32"

ROUGH OPENING WIDTH


ALUMINUM WEEP SILL

8-0=

13 1

1/16

"6-

6=9

13/3

2"D

.L.O

.5

13/3

2"

1 1/

8"

1/2"

UN

IT D

IME

NS

ION

HE

IGH

TR

OU

GH

OP

EN

ING

HE

IGH

TF

RA

ME

HE

IGH

T

1/4" 1/4"

Rectangular Transoms Stacked over Classique Doors

Clad Wood

Head

aLUmiNUm WeeP siLL

FR

AM

E &

UN

IT D

IME

NS

ION

HE

IGH

T

RO

UG

H O

PE

NIN

G H

EIG

HT

1 3/8"

9 13

/32"

D.L

.O5

13/3

2"

5 29/32"1/2"

4 9/16"3/4"

8 21

/32" 2 3/

32"

8 21

/32" 2

3/32

"

standard inswinG CrOss seCtiOn drawinGs


reCtanGular transOms staCKed Over inswinG dOOrs


Standard Classique Cross Section Drawings



1 1/8"

5 17/32"5 13/32" D.L.O.

1/4" 1/4"

ROUGH OPENING WIDTH

FRAME WIDTH


D.L.O. 5 17/32"5 13/32"

ROUGH OPENING WIDTH


ALUMINUM WEEP SILL

8-0=

13 1

1/16

"6-

6=9

13/3

2"D

.L.O

.5

13/3

2"

1 1/

8"

1/2"

UN

IT D

IME

NS

ION

HE

IGH

TR

OU

GH

OP

EN

ING

HE

IGH

TF

RA

ME

HE

IGH

T

1/4" 1/4"

Rectangular Transoms Stacked over Classique Doors

Clad Wood

Head

aLUmiNUm WeeP siLL

FR

AM

E &

UN

IT D

IME

NS

ION

HE

IGH

T

RO

UG

H O

PE

NIN

G H

EIG

HT

1 3/8"

9 13

/32"

D.L

.O5

13/3

2"

5 29/32"1/2"

4 9/16"3/4"

8 21

/32" 2 3/

32"

8 21

/32" 2

3/32

"

1 1/8"

5 13/32" D.L.O. D.L.O. 5 13/32"10"

1/4"1/4"ROUGH OPENING WIDTH

FRAME WIDTH


1 1/8"

5 1/2"9 29/32"D.L.O. D.L.O.5 13/32"

1/4"

1/4"


FRAME WIDTHROUGH OPENING WIDTH

1/4"

1/4"

D.L.O. 9 31/32"9 29/32"D.L.O. D.L.O. 5 13/32"5 13/32"

UNIT DIMENSION WIDTHROUGH OPENING WIDTH

FRAME WIDTH

5 13/32"10"5 13/32"

1/4"1/4"

ROUGH OPENING WIDTH


5 1/2"D.L.O.9 29/32"D.L.O.5 13/32"

1/4"1/4"

ROUGH OPENING WIDTH


5 13/32" D.L.O. D.L.O. D.L.O.9 31/32" 9 29/32" 5 13/32"

1/4" 1/4"

ROUGH OPENING WIDTH


1 1/8"

D.L.O. D.L.O.

Two-Wide Classique French Doors

Two-Wide Classique Doors - Stationary/Active

Clad Wood

Clad Wood

Three-Wide Classique Doors

Clad

Wood

twO-wide inswinG FrenCH dOOrs twO-wide inswinG dOOrs - statiOnary/aCtive

tHree-wide inswinG dOOrs

1 1/8"

5 13/32" D.L.O. D.L.O. 5 13/32"10"


FRAME WIDTH


1 1/8"

5 1/2"9 29/32"D.L.O. D.L.O.5 13/32"

1/4"

1/4"



1/4"

1/4"

D.L.O. 9 31/32"9 29/32"D.L.O. D.L.O. 5 13/32"5 13/32"


FRAME WIDTH

5 13/32"10"5 13/32"

1/4"1/4"

ROUGH OPENING WIDTH


5 1/2"D.L.O.9 29/32"D.L.O.5 13/32"

1/4"1/4"

ROUGH OPENING WIDTH


5 13/32" D.L.O. D.L.O. D.L.O.9 31/32" 9 29/32" 5 13/32"

1/4" 1/4"

ROUGH OPENING WIDTH


1 1/8"

D.L.O. D.L.O.



Clad Wood

Clad Wood


Clad

Wood

1 1/8"

5 13/32" D.L.O. D.L.O. 5 13/32"10"


FRAME WIDTH


1 1/8"

5 1/2"9 29/32"D.L.O. D.L.O.5 13/32"

1/4"

1/4"



1/4"

1/4"

D.L.O. 9 31/32"9 29/32"D.L.O. D.L.O. 5 13/32"5 13/32"


FRAME WIDTH

5 13/32"10"5 13/32"

1/4"1/4"

ROUGH OPENING WIDTH


5 1/2"D.L.O.9 29/32"D.L.O.5 13/32"

1/4"1/4"

ROUGH OPENING WIDTH


5 13/32" D.L.O. D.L.O. D.L.O.9 31/32" 9 29/32" 5 13/32"

1/4" 1/4"

ROUGH OPENING WIDTH


1 1/8"

D.L.O. D.L.O.



Clad Wood

Clad Wood


Clad

Wood

7� ClassiC series

entranCe DoorsinswinG entranCe Doors

outswinG entranCe Doors

entranCe Door siDelites

entranCe Door transoms



➢ H°K LoE� -��0*



ot h e r op t i o n s: ➢ Other wood species➢ Ovolo profile glazing beads and interior grille bars➢ Interior prefinishing➢ Interior casing➢ Toronto or München handle set in Bright Brass, Antique Brass, Satin Nickel, Antique Nickel, Matte Black, Rustic Umber or Oil-rubbed finishes➢ HLS 9000 stainless steel multi-point locking hardware on single panel doors, French doors have a �-point lock on the active panel and a �-point lock on the less active panel

➢ �-point flush bolt lock on less active panel of French doors➢ Single-point locking system➢ Adjustable, �"x�-�/8" hinges with �/8" radius corners in Bright Brass, Antique Brass, Stainless Steel, Satin Nickel, Antique Nickel, Matte Black, Rustic Umber and Oil-rubbed finishes➢ Non-adjustable, residential, �"x�" ball-bearing hinges with 1/�" radius corners in Bright Brass, Antique Brass, Stainless Steel, Satin Nickel, Antique Nickel, Matte Black and Oil-rubbed finishes➢ Non-adjustable, commercial-grade, �"x�" ball-bearing hinges with square corners in Bright Brass, Antique Brass, Stainless Steel, and Oil-rubbed finishes➢ Non-adjustable, commercial-grade, �-1/�"x�-1/�" hinges in Bright Brass and Oil-rubbed finishes➢ “Ultra” sliding screens with fiberglass or aluminum mesh and extruded aluminum frames to coordinate with exterior clad colors➢ Self-closing, swinging screen includes a spring-loaded lock, fiber glass or aluminum mesh, and aluminum screen frame to coordinate with exterior clad colors➢ Extension jambs in a variety of sizes➢ Thermal handicap sill

i n s w i n G e n t r a n C e d O O r O p t i O n a l F e at u r e s

i n s w i n G e n t r a n C e d O O r

s ta n d a r d F e at u r e s

➢ 1-�/�" thick sash panel, prehung in the 1-�/1�" frame



bottom rail is a nominal 7 9/1�"

➢ Constructed of pine, with pine interior stops and wood mull

casings on mulled units


➢ Tempered, 7/8" H°K LoE�-�70 insulating glass




➢ Adjustable, �"x�-�/8" hinges with �/8" radius corners in a

gold-painted finish

➢ Bronze-anodized aluminum, self-draining Waterguard™ exterior

sill with an oak interior threshold



C l a s s i C s e r i e s i n s w i n G e n t r a n C e d O O r

NOTES:



7� ClassiC series

C l a s s i C s e r i e s O u t s w i n G e n t r a n C e d O O r

O u t s w i n G e n t r a n C e d O O r

s ta n d a r d F e at u r e s

➢ 1-�/�" thick sash panel, prehung in the 1-1/1�" frame with a 1/�"

rabbeted-in stop



bottom rail is a nominal 7-9/1�"




➢ Tempered, 7/8" H°K LoE�-�70 insulating glass



➢ Fully weatherstripped for tight seal

➢ Non-adjustable, residential, �"x�" ball-bearing hinges with 1/�"

radius corners in a Bright Brass finish

➢ Bronze-anodized aluminum bumper sill with oak interior threshold




➢ H°K LoE� -��0*



ot h e r op t i o n s: ➢ Other wood species➢ Ovolo profile glazing beads and interior grille bars➢ Interior prefinishing➢ Interior casing➢ Toronto or München handle set in Bright Brass, Antique Brass, Satin Nickel, Antique Nickel, Matte Black, Rustic Umber or Oil-rubbed finishes

➢ HLS 9000 stainless steel multi-point locking hardware on single panel doors, French doors have a �-point lock on the active panel and a �-point lock on the less active panel➢ �-point flush bolt lock on less active panel of French doors➢ Single-point locking system➢ Non-adjustable, residential, �"x�" ball-bearing hinges with 1/�" radius corners in Antique Brass, Stainless Steel, Satin Nickel, Antique Nickel, Matte Black and Oil-rubbed finishes➢ Adjustable, �"x�-�/8" hinges with �/8" radius corners in Gold-painted, Bright Brass, Antique Brass, Stainless Steel, Satin Nickel, Antique Nickel, Matte Black, Rustic Umber, and Oil-rubbed finishes➢ Non-adjustable, commercial-grade, �"x�" ball-bearing hinges with square corners in Bright Brass, Antique Brass, Stainless Steel and Oil-rubbed finishes➢ Non-adjustable, commercial-grade, �-1/�"x�-1/�" hinges in Bright Brass and Oil-rubbed finishes➢ Extension jambs (up to 1�" applied, over 1�" shipped loose for field application)➢ Thermal or non-thermal handicap sills

O u t s w i n G e n t r a n C e d O O r O p t i O n a l F e at u r e s

NOTES:




h a r D wa r e

As standard, inswing entrance doors feature Gold-painted adjustable hinges and outswing entrance doors feature Bright Brass �" x �" non-adjustable hinges with 1/�" radius corners. Handle sets, boring or locking systems are not standard on entrance doors. The following hinges and handles are available as an option.

Antique Nickel

Antique Brass

Satin Nickel

BrightBrass

Toronto

München

Adjustable Hinges Non-Adjustable Hinges

Residential, �" x �" ball-bearing, with 1/�" radius corners

Oil-rubbed*

Bright Brass Antique Brass

Matte Black

Gold-painted

Stainless Steel

Rustic Umber

Antique NickelAntique Brass Satin NickelBright Brass

Stainless SteelAntique BrassBright Brass Oil-rubbed*

Bright Brass Oil-rubbed*

Oil-rubbed*

Rustic Umber

Satin Nickel Antique NickelMatte BlackStainless Steel Oil-rubbed*

Commercial-grade, �" x �" ball-bearing, with square corners

Commercial-grade, �-1/�" x �-1/�"

C l a s s i C s e r i e s e n t r a n C e d O O r O p t i O n s

Matte Black

*The Oil-rubbed finish is a living finish, which means that it will change appearance over time with use.

78 ClassiC series


N/AN/AN/AN/A

N/AN/AN/AN/A

N/AN/AN/AN/AN/AN/AN/AN/A

N/AN/AN/AN/AN/AN/AN/AN/AN/A

N/A

N/A

inswing ent. sash Designs

KK610

CXD- 2068 / 4068CXD- 2668 / 5068CXD- 2868 / 5468CXD- 3068 / 6068CXD- 2070 / 4070CXD- 2670 / 5070CXD- 2870 / 5470CXD- 3070 / 6070CXD- 2080 / 4080CXD- 2680 / 5080CXD- 2880 / 5480CXD- 3080 / 6080

Sash Design#:

Pro

duct

I.D

. Code

KK625 KK626 KK635 KK636

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

i n s w i n G e n t r a n C e d O O r s a s H d e s i G n s

NOTES:

Sash designs KK��, KK��, KK�� and KK�� are PDL. If a different grille pattern is

needed, specify sash design KK�10 and the type of grille configuration.


F.S. to Panel O.S.M. (1-wide, active) -1 1�/1�" -� ��/��" (1-wide, stationary) -1 �/�" -� ��/��" (�-wide) -� 9/1�"÷� -� ��/��" (�-wide) -� �/1�"÷� -� ��/��"

Panel O.S.M. to G.S. (all inswing doors) -8 1/8" -11 �/��"G.S. to D.L.O. -1" -1"notes: Dimension calculations for sidelites and transoms may be obtained from your Kolbe Windows & Doors supplier.Clear opening dimensions can be found on pg. 101.


wiDth heiGht


F.s.r.o.

G.s.

inswing entrance Doors

2'-1 5/8"2'-2 1/8"15 11/16"

4'-2 3/16"4'-2 11/16"15 11/16"

6'-1

0 23

/32"

6'-1

1 7/

32"

68 2

9/32

"

7'-2

23/

32"

7'-3

7/3

2"72

29/

32"

2068 4068

2070 4070

8'-2

23/

32"

8'-3

7/3

2"84

29/

32"

2080 4080

2'-7 5/8"2'-8 1/8"21 11/16"

5'-2 3/16"5'-2 11/16"21 11/16"

2668 5068

2670 5070

2680 5080

2'-9 5/8"2'-10 1/8"23 11/16"

5'-6 3/16"5'-6 11/16"23 11/16"

2868 5468

2870 5470

2880 5480

3'-1 5/8"3'-2 1/8"27 11/16"

6'-2 3/16"6'-2 11/16"27 11/16"

3068 6068

3070 6070

3080 6080


i n s w i n G e n t r a n C e d O O r s

NOTES:




PRODUCT CODES:

To order inswing entrance doors, add “CXD” before the product number (Ex: CXD�0�8). When ordering single units, specify stationary, hinged left or hinged right. Specify inswing. Operation is viewed from the interior.


80 ClassiC series

C.P. F.s.r.o.

G.s.*

Premier sidlelites

1'-1 3/4"1'-2 1/4"

7 3/4"

1'-3 3/4"1'-4 1/4"

9 3/4"

1'-5 3/4"1'-6 1/4"11 3/4"

1'-7 3/4"1'-8 1/4"13 3/4"

6'-1

0 23

/32"

6'-1

1 7/

32"

68 2

9/32

"

7'-2

23/

32"

7' 3

7/3

2"72

29/

32"

WXD1068S

WXD1070S

8'-2

23/

32"

8'-3

7/3

2"84

29/

32"

WXD1080S

WXD1268S

WXD1270S

WXD1280S

WXD1468S

WXD1470S

WXD1480S

WXD1668S

WXD1670S

WXD1680S

N/AN/AN/AN/A


Premier sidelitesash Designs

KK510

WXD1068SWXD1268SWXD1468SWXD1668SWXD1070SWXD1270SWXD1470SWXD1670SWXD1080SWXD1280SWXD1480SWXD1680S

Sash Design#:

Pro

duct

I.D

. Cod

e

KK515 KK516

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

i n s w i n G e n t r a n C e d O O r s i d e l i t e si n s w i n G e n t r a n C e d O O r

s i d e l i t e s a s H d e s i G n s

NOTES:


Sidelite panels are not available as true clad units.


PRODUCT CODES:

To order sidelites, use the product code shown and specify clad profile.

Sidelite sash designs KK�1�, KK�1�, and KK�1�0 have PDL. If a different grille pattern is needed, specify sash design KK�10 and the type of grille configuration.

C.P. F.S. = Clad Profile Frame Size • R.O. = Rough Opening • G.S. = Glass Size




2'-7 3/8"2'-7 7/8"25 7/8"

2'-9 3/8"2'-9 7/8"27 7/8"

3'-1 3/8"3'-1 7/8"31 7/8"

inswing entrance Doors - Rectangular transoms

4'-1 15/16"4'-2 7/16"44 7/16"

5'-1 15/16"5'-2 7/16"56 7/16"

5'-5 15/16"5'-6 7/16"60 7/16"

6'-1 15/16"6'-2 7/16"68 7/16"

F.s.r.o.

G.s.

11 1

/2"

1'-0

"6"

1'-3

1/2

"1'

-4"

10"

2'-1 3/8"2'-1 7/8"19 7/8"

1'-5

1/2

"1'

-6"

12"

1'-7

1/2

"1'

-8"

14"

1'-1

1 1/

2"2'

-0"

18"

2'-5

1/2

"2'

-6"

24"

2010

2014

2016

2018

2020

2026

3010

3014

3016

3018

3020

3026

4010

4014

4016

4018

4020

4026

5010

5014

5016

5018

5020

5026

6010

6014

6016

6018

6020

6026

5410

5414

5416

5418

5420

5426

2810

2814

2816

2818

2820

2826

2610

2614

2616

2618

2620

2626

i n s w i n G e n t r a n C e d O O r s r e C ta n G u l a r t r a n s O m s

NOTES:






PRODUCT CODES:

To order transoms, add “CXDT” before the product number (Ex: CXDT�0��). Specify inswing.


8� ClassiC series

1 1/8"

5 13/32" D.L.O. D.L.O. 5 13/32"10"


FRAME WIDTH


5 13/32"10"D.L.O. D.L.O.5 13/32"

1/4"1/4"

ROUGH OPENING WIDTH


Rectangular Transoms Stacked over Premier Doors

Clad Wood

Two-Wide Premier French Door

Clad Wood

Premier Door with Sidelite

3 1/2" 8 29/32"D.L.O.

8 21

/32" 2 3/

32"

8 21

/32" 2

3/32

"

twO-wide inswinG entranCe FrenCH dOOrs inswinG entranCe dOOr witH sidelite

reCtanGular transOm staCKed Over inswinG entranCe dOOrs

Standard Premier Cross Section Drawings

1 1/8"

5 17/32"5 13/32" D.L.O.

1/4" 1/4"

ROUGH OPENING WIDTHFRAME WIDTH


D.L.O. 5 17/32"5 13/32"

ROUGH OPENING WIDTH


ALUMINUM WEEP SILL

7-0=

15 3

/16"

6-8=

11 3

/16"

D.L

.O.

5 13

/32"

1 1/

8"

1/2"

UN

IT D

IME

NS

ION

HE

IGH

TR

OU

GH

OP

EN

ING

HE

IGH

TF

RA

ME

HE

IGH

T

1/4"1/4"



Raised Panel Door - Wood Vertical Section

22 3

/4"

11 3

/32"

RO

UG

H O

PE

NIN

G H

EIG

HT

FR

AM

E H

EIG

HT

UN

IT D

IME

NS

ION

HE

IGH

T

8"35

3/8

"6

1/16

"

1 25/64"

4 9/16"5 5/8"

3/4"

1/2"

6'-8" EXAMPLE HEIGHT

8-0=

13 1

1/16

"

ALUMINUM WEEP SILL

Head

aLUmiNUm WeeP siLL

FR

AM

E &

UN

IT D

IME

NS

ION

HE

IGH

T

RO

UG

H O

PE

NIN

G H

EIG

HT

1 3/8"

9 13

/32"

D.L

.O5

13/3

2"5 29/32"1/2"

4 9/16"3/4"

standard inswinG entranCe dOOr CrOss seCtiOn drawinGs



1 1/8"

5 13/32" D.L.O. D.L.O. 5 13/32"10"


FRAME WIDTH


5 13/32"10"D.L.O. D.L.O.5 13/32"

1/4"1/4"

ROUGH OPENING WIDTH


Rectangular Transoms Stacked over Premier Doors

Clad Wood

Two-Wide Premier French Door

Clad Wood

Premier Door with Sidelite

3 1/2" 8 29/32"D.L.O.

8 21

/32" 2 3/

32"

8 21

/32" 2

3/32

"


5 13/32" D.L.O. 9 29/32" D.L.O. 5 1/2"

4 9/

16"

5 29

/32"

1/4"FRAME & UNIT DIMENSION WIDTHROUGH OPENING WIDTH

1/4"


N/AN/AN/AN/A

N/AN/AN/AN/A


N/AN/AN/AN/AN/AN/AN/AN/AN/A

N/A

N/A

outswing ent. sash Designs

KK610

CXD- 2068 / 4068CXD- 2668 / 5068CXD- 2868 / 5468CXD- 3068 / 6068CXD- 2070 / 4070CXD- 2670 / 5070CXD- 2870 / 5470CXD- 3070 / 6070CXD- 2080 / 4080CXD- 2680 / 5080CXD- 2880 / 5480CXD- 3080 / 6080

Sash Design#:

Pro

duct

I.D

. Code

KK625 KK626 KK635 KK636

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

O u t s w i n G e n t r a n C e d O O r s a s H d e s i G n s

NOTES:

Sash designs KK��, KK��, KK�� and KK�� have PDL. If a different grille pattern is needed,

specify sash design KK�10 and the type of grille configuration.


F.S. to Panel O.S.M. (1-wide) -� 1�/��" -� �7/��"

Panel O.S.M. to G.S. (1-wide) (�-8, 7-0, 8-0 hts.) -8 1/8" -11 1/8" (�-� ht., patio) -8 1/8" -11 �/��" (8-0 ht., patio) -8 1/8" -11 1/8"Panel Opening Width to G.S. (�-wide) -17 �/8"÷�F.S. to Panel Opening Width -� 1/8" G.S. to D.L.O. -1" -1"note: Dimension calculations for sidelites and transoms may be obtained from your Kolbe Windows & Doors supplier.Clear opening dimensions can be found on pg. 101.


wiDth heiGht


8� ClassiC series

F.s.r.o.

G.s.

outswing entrance Doors – Clad

2'-8 23/32"2'-9 7/32"21 11/16"

5'-3 3/8"5'-3 7/8"21 11/16"

2'-2 23/32"2'-3 7/32"15 11/16"

4'-3 3/8"4'-3 7/8"15 11/16"

6'-1

0 27

/32"

6'-1

1 11

/32"

68 7

/8"

7'-2

27/

32"

7'-3

11/

32"

72 7

/8"

CXD2668 CXD5068

CXD2670 CXD5070

8'-2

27/

32"

8'-3

11/

32"

84 7

/8"

CXD2680 CXD5080

CXD2068 CXD4068

CXD2070 CXD4070

CXD2080 CXD4080

2'-10 23/32"2'-11 7/32"23 11/16"

5'-7 3/8"5'-7 7/8"23 11/16"

CXD2868 CXD5468

CXD2870 CXD5470

CXD2880 CXD5480

3'-2 23/32"3'-3 7/32"27 11/16"

6'-3 3/8"6'-3 7/8"27 11/16"

CXD6068

CXD3070 CXD6070

CXD3080 CXD6080

CXD3068

F.s.r.o.

G.s.

outswing Patio Doors – Clad2'-7 11/32"2'-7 27/32"

20 5/16"

5'-0 5/8"5'-1 1/8"20 5/16"

6'-7

5/8

"6'

-8 1

/8"

65 1

1/16

"

7'-1

1 23

/32"

8'-0

7/3

2"81

3/4

"

SPC2666 SPC41166

SPC2680 SPC41180

3'-1 11/32"3'-1 27/32"

26 5/16"

6'-0 5/8"6'-1 1/8"26 5/16"

SPC3066 SPC51166

SPC3080 SPC51180

O u t s w i n G e n t r a n C e d O O r s

O u t s w i n G p at i O d O O r s

NOTES:


Dimensions are given for active units; dimensions of stationary units may vary.



PRODUCT CODES:

To order doors, use the product number shown and specify outswing. When ordering single units, specify stationary, hinged left or hinged right. Operation is viewed from the exterior.

F.S. = Frame Size


G.S. = Glass Size



C.P. F.s.r.o.

G.s.*

outswing ext. Door sidlelites – Clad Profile1'-2 3/4"1'-3 1/4"

7 5/8"

1'-4 3/4"1'-5 1/4"

9 5/8"

1'-6 3/4"1'-7 1/4"11 5/8"

1'-8 3/4"1'-9 1/4"13 5/8"

6'-1

0 27

/32"

6'-1

1 11

/32"

68 1

/8"

7'-2

27/

32"

7' 3

11/

32"

72 1

/8"

WXD1068S

WXD1070S

8'-2

27/

32"

8' 3

11/

32"

84 1

/8"

WXD1080S

WXD1268S

WXD1270S

WXD1280S

WXD1468S

WXD1470S

WXD1480S

WXD1668S

WXD1670S

WXD1680S

N/AN/AN/AN/A


outswing sidelitesash Designs

KK510

WXD1068SWXD1268SWXD1468SWXD1668SWXD1070SWXD1270SWXD1470SWXD1670SWXD1080SWXD1280SWXD1480SWXD1680S

Sash Design#:

Pro

duct

I.D

. Cod

e

KK515 KK516

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

O u t s w i n G e n t r a n C e d O O r s i d e l i t e s O u t s w i n G e n t r a n C e d O O r

s i d e l i t e s a s H d e s i G n s

NOTES:


Sidelite panels are not available as true clad units.



PRODUCT CODES:

To order sidelites, use the product code shown and specify clad profile.

Sidelite sash designs KK�1�, KK�1�, and KK�1�0 have PDL. If a different grille pattern is needed, specify sash design KK�10 and the type of grille configuration.

C.P. F.S. = Clad Profile Frame Size

R.O. = Rough Opening • G.S. = Glass Size


8� ClassiC series

2'-10 23/32"2'-11 7/32"28 19/32"

3'-2 23/32"3'-3 7/32"32 19/32"

5'-3 3/8"5'-3 7/8"57 1/4"

4'-3 3/8"4'-3 7/8"45 1/4"

Clad outswing ext. Doors - Rectangular transoms5'-7 3/8"5'-7 7/8"61 1/4"

6'-3 3/8"6'-3 7/8"69 1/4"

F.s.r.o.

G.s.

11 1

/2"

1'-0

"5

3/8"

1'-3

1/2

"1'

-4"

9 3/

8"

2'-8 23/32"2'-9 7/32"26 19/32"

2'-2 23/32"2'-3 7/32"20 19/32"

1'-5

1/2

"1'

-6"

11 3

/8"

1'-7

1/2

"1'

-8"

13 3

/8"

1'-1

1 1/

2"2'

-0"

17 3

/8"

2'-5

1/2

"2'

-6"

23 3

/8"

CXDT2610

CXDT2614

CXDT2616

CXDT2618

CXDT2620

CXDT2626

CXDT2010

CXDT2014

CXDT2016

CXDT2018

CXDT2020

CXDT2026

CXDT5010

CXDT5014

CXDT5016

CXDT5018

CXDT5020

CXDT5026

CXDT4010

CXDT4014

CXDT4016

CXDT4018

CXDT4020

CXDT4026

CXDT5410

CXDT5414

CXDT5416

CXDT5418

CXDT5420

CXDT5426

CXDT6010

CXDT6014

CXDT6016

CXDT6018

CXDT6020

CXDT6026

CXDT3010

CXDT3014

CXDT3016

CXDT3018

CXDT3020

CXDT3026

CXDT2810

CXDT2814

CXDT2816

CXDT2818

CXDT2820

CXDT2826

O u t s w i n G e n t r a n C e d O O r s r e C ta n G u l a r t r a n s O m s

NOTES:




Transom dimensions shown are for units stacked above active doors; dimensions for transoms stacked above stationary doors may vary.




PRODUCT CODES:

To order transoms, use the product number shown.


2'-7 11/32"2'-7 27/32"

25 1/4"

3'-1 11/32"3'-1 27/32"

31 1/4"

5'-0 5/8"5'-1 5/8"54 1/2"

6'-0 5/8"6'-1 5/8"66 1/2"

transoms for outswing Patio Door sizesF.s.

r.o.G.s.

11 1

/2"

1'-0

"5

3/8"

1'-3

1/2

"1'

-4"

9 3/

8"

1'-5

1/2

"1'

-6"

11 3

/8"

1'-7

1/2

"1'

-8"

13 3

/8"

1'-1

1 1/

2"2'

-0"

17 3

/8"

2'-5

1/2

"2'

-6"

23 3

/8"

SPCT2610 SPCT3010 SPCT41110 SPCT51110






O u t s w i n G p at i O d O O r s r e C ta n G u l a r t r a n s O m s



Rectangular Transoms Stacked over Manor Doors

Clad Wood

Two-Wide Manor French Door

Clad Wood

Manor Door with Sidelite

3 13/16" D.L.O. 9 5/8"

1/4"5 23/32" 10 1/16"

FRAME WIDTHROUGH OPENING WIDTHUNIT DIMENSION WIDTH

1 1/4"

1 9/16"

D.L.O.D.L.O.1/4"

1 9/16"

4 9/

16"

5 5/

8"

5 23/32"

3 1/

4"

9 9/

32"

9 9/

32"

3 1/

2"

5 31/32"D.L.O.5 31/32"

FRAME & UNIT DIMENSION WIDTH

10 1/16" D.L.O.

4 9/

16"

5 15

/16"

twO-wide OutswinG FrenCH dOOrs OutswinG entranCe dOOr witH sidelite

reCtanGular transOm staCKed Over OutswinG entranCe dOOrs

Standard Manor Cross Section Drawings



Raised Panel Door - Wood Vertical Section

1/4"

1 1/4"

D.L.O.5 13/16" 5 23/32"


ROUGH OPENING WIDTH

FRAME WIDTH1/4"

1/2"

aLUmiNUm siLL6'-8" EXAMPLE HEIGHT

22 3

/4"

10 5

/8"

1 63/64"

4 9/16"

UN

IT D

IME

NS

ION

HE

IGH

TR

OU

GH

OP

EN

ING

HE

IGH

TF

RA

ME

HE

IGH

T8"

35 3

/8"

5 13

/16"

5 5/8"

1 9/16"

1/2"

aLUmiNUm siLL

Head

7-0

= 1

4 3/

4"8-

0 =

13

1/4"

*6-6

= 8

31/

32"

*8-0

= 1

3 1/

4"

RO

UG

H O

PE

NIN

G H

EIG

HT

6-8

= 1

0 3/

4"

UN

IT D

IME

NS

ION

HE

IGH

T

* CLASSIQUE SIZES

FR

AM

E H

EIG

HT

D.L

.O.

5 23

/32"

1 63/64"

5 5/8"

4 9/16"

1 9/16"

ALUMINUM SILL

FR

AM

E &

UN

IT D

IME

NS

ION

HE

IGH

T

D.L

.O.

8 31

/32"

5 31

/32"

1 63/64"

5 15/16"

4 9/16"

1 9/16"


5 31/32" D.L.O. 6 1/16"

4 9/

16"

5 15

/16"

standard OutswinG entranCe dOOr CrOss seCtiOn drawinGs



Rectangular Transoms Stacked over Manor Doors

Clad Wood

Two-Wide Manor French Door

Clad Wood

Manor Door with Sidelite

3 13/16" D.L.O. 9 5/8"

1/4"5 23/32" 10 1/16"

FRAME WIDTHROUGH OPENING WIDTHUNIT DIMENSION WIDTH

1 1/4"

1 9/16"

D.L.O.D.L.O.1/4"

1 9/16"

4 9/

16"

5 5/

8"

5 23/32"

3 1/

4"

9 9/

32"

9 9/

32"

3 1/

2"

5 31/32"D.L.O.5 31/32"


10 1/16" D.L.O.

4 9/

16"

5 15

/16"


3 11/16"

5 15/16" 6 1/32"

12 1/16"

88 ClassiC series

Complementary raDius units

GeometriC units



➢ H°K LoE� -��*

➢ Patterned-, bronze- or gray-lite

➢ Tempered or laminated

➢ Other options standard to the industry


➢ Interior removable wood grilles with 7/8" or 1-1/8" bars and

full surrounds

➢ PDL with �/8", 7/8", 1-1/8", 1-�/�" or �-1/�" bars

ot h e r op t i o n s: ➢ Other wood species

➢ Ovolo profile glazing beads and interior grille bars

➢ Interior prefinishing

➢ Interior casing

➢ Glazing may be direct set (clad profile only)

➢ Extended legs or no legs on half-circles

➢ Extension jambs (up to 1�" applied, over 1�" shipped loose for

field application)

r a d i u s O p t i O n a l F e at u r e s

NOTES:



r a d i u s s ta n d a r d F e at u r e s

➢ 1-�/�" thick sash

➢ Overall jamb width is �-9/1�" (basic box width matches the unit

being complemented)

➢ �" straight legs on half-circles



➢ Prefinished, extruded aluminum cladding

➢ 7/8" H°K LoE�-�70 insulating glass*

➢ Glazing is sash set to the interior with wood glazing beads



➢ Standard radius shapes include quarter-circles, half-circles,

full-circles, ovals and ellipticals



C l a s s i C s e r i e s r a d i u s

90 ClassiC series

Dimension calculation formulas for radius units vary depending on the unit and application. Please contact your Kolbe supplier if formulas are needed.



r a d i u s d i v i d e d l i t e p at t e r n s

Sunburst

Double Cut Sunburst

Triple Cut Sunburst

Open Hub Sunburst

Starburst

Spider Web

Elliptical Sunburst

�-1/�" PDL bars are not available for patterns with curved bars.



H a l F - C i r C l e u n i t s C a s e m e n t

F.S.R.O.

G.S.

Half-Circle Units to match Casements

F.S.R.O.

G.S.

F.S.R.O.

G.S.

1'-8"1'-8 1/2"15 1/4"

1'-1

"1'

-1 1

/2"

8 1/

4"

2'-0"2'-0 1/2"19 1/4"

1'-3

"1'

-3 1

/2"

10 1

/4"

1'-6

"1'

-6 1

/2"

13 1

/4"

2'-6"2'-6 1/2"25 1/4"

RTKN1 RTKW1 RTKX1

F.S.R.O.

G.S.

1'-9

"1'

-9 1

/2"

16 1

/4"

3'-0"

3'-0 1/2"31 1/4"

RTK30/E1

F.S.R.O.

G.S.

3'-4"3'-4 1/2"35 1/4"

RTKN2

1'-1

1"1'

-11

1/2"

18 1

/4"

F.S.R.O.

G.S.

3'-6"3'-6 1/2"

37"

RTK36

2' 0

"2'

0-1

/2"

19 1

/4"

F.S.R.O.

G.S.

2'-3

"2'

-3 1

/2"

22 1

/4"

4'-0"4'-0 1/2"43 1/4"

RTKW2

F.S.R.O.

G.S.

5'-0"5'-0 1/2"55 1/4"

RTKX2

2'-9

"2'

-9 1

/2"

28 1

/4"

F.S.R.O.

G.S.

6'-0"6'-0 1/2"67 1/4"

RTKW3

3'-3

"3'

-3 1

/2"

34 1

/4"

F.S.R.O.

G.S.

4'-0

"4'

-0 1

/2"

43 1

/4"

7'-6"7'-6 1/2"85 1/4"

RTKX3

F.S.R.O.

G.S.

8'-0"8'-0 1/2"91 1/4"

4'-3

"4'

-3 1

/2"

46 1

/4"

RTKW4

F.S.R.O.

G.S.

1'-7

"1'

-7 1

/2"

14 1

/4"

2'-8"2'-8 1/2"27 1/4"

RTKS2

F.S.R.O.

G.S.

2'-4"2'-4 1/2"23 1/4"

1'-5

"1'

-5 1

/2"

12 1

/4"

RTKL1

F.S.R.O.

G.S.

2'-7

"2'

-7 1

/2"

26 1

/4"

4'-8"4'-8 1/2"51 1/4"

RTKL2

F.S.R.O.

G.S.

7'-0"7'-0 1/2"79 1/4"

RTKL3

3'-9

"3'

-9 1

/2"

40 1

/4"

F.S.R.O.

G.S.

1'-4"1'-4 1/2"11 1/4"

0'-1

1"0'

-11

1/2"

6 1/

4"

RTKS1

H a l F - C i r C l e u n i t s d O u b l e H u n G

F.s.r.o.

G.s.

Half-Circle units to match Double Hungs

F.s.r.o.

G.s.

F.s.r.o.

G.s.

F.s.r.o.

G.s.

1'-9 1/2"1'-10"

16"

1'

-1 3

/4"

1'-2

1/4

"8

1/4"

RT16DH

2'-1 1/2"2'-2"20"

1'-3

3/4

"1'

-4 1

/4"

10 1

/4"

RT20DH 1'-5

3/4

"1'

-6 1

/4"

12 1

/4"

2'-5 1/2"2'-6"24"

RT24DH

F.s.r.o.

G.s.

3'-1 1/2"3'-2"32"

RT32DH1'-9

3/4

"1'

-10

1/4"

16 1

/4"

F.s.r.o.

G.s.

3'-5 1/2"3'-6"36"

RT36DH1'-1

1 3/

4"2'

-0 1

/4"

18 1

/4"

F.s.r.o.

G.s.

1'-7

3/4

"1'

-8 1

/4"

14 1

/4"

2'-9 1/2"

2'-10"28"

RT28DH

2'-1

3/4

"2'

-2 1

/4"

20 1

/4"

3'-9 1/2"3'-10"

40"

RT40DH

F.s.r.o.

G.s.

4'-3"4'-3 1/2"45 1/2"

RT20-2DH

2'-4

1/2

"2'

-5"

23"

F.s.r.o.

G.s.

3'-7"3'-7 1/2"37 1/2"

RT16-2DH

2'-0

1/2

"2'

-1"

19"

F.s.r.o.

G.s.

4'-11"4'-11 1/2"

53 1/2"

RT24-2DH

2'-8

1/2

"2'

-9"

27"

F.s.r.o.

G.s.

3'-0

1/2

"3'

-1"

31"

5'-7"5'-7 1/2"61 1/2"

RT28-2DH

F.s.r.o.

G.s.

3'-4

1/2

"3'

-5"

35"

RT32-2DH

6'-3"6'-3 1/2"69 1/2"

F.s.r.o.

G.s.

3'-8

1/2

"3'

-9"

39"

RT36-2DH

6'-11"6'-11 1/2"

77 1/2"

F.s.r.o.

G.s.

4'-0

1/2

"4'

-1"

43"

RT40-2DH

7'-7"7'-7 1/2"85 1/2"

NOTES:


Radius units are sash set as standard. Direct set units are available only in wood. Glass sizes differ for direct set units. Contact your supplier for details.


Grilles are optional. Grille pattern options are shown on pg. 90.



PRODUCT CODES:

To order radius units, add “C” before the product number (Ex: CRTKW�).


9� ClassiC series


Half-Circle units to match Viewports

F.s.r.o.

G.s.

6'-5 1/2"6'-6"72"

RTK60

3'-5

3/4

"3'

-6 1

/4"

36 1

/4"

H a l F - C i r C l e u n i t s v i e w p O r t s l i d i n G p at i O d O O r

Half-Circle units to match Garden-aires

F.s.r.o.

G.s.

5'-0"5'-0 1/2"54 1/2"

2'-9

"2'

-9 1

/2"

27 1

/2"

RTG50

F.s.r.o.

G.s.

4'-11"4'-11 1/2"

53 1/2"

2'-8

1/2

"2'

-9"

27"

RTG411

F.s.r.o.

G.s.

6'-0"6'-0 1/2"66 1/2"

RTG603'

-3"

3'-3

1/2

"33

1/2

"

F.s.r.o.

G.s.

5'-11"5'-11 1/2"

65 1/2"

RTG511

3'-2

1/2

"3'

-3"

33"

F.s.r.o.

G.s.

4'-3

"4'

-3 1

/2"

45 1

/2"

7'-11"

7'-11 1/2"90 1/2"

RTG711

F.s.r.o.

G.s.

4'-2

1/2

"4'

-3"

45"

8'-0"

8'-0 1/2"90 1/2"

RTG80

F.s.r.o.

G.s.

6'-6"6'-6 1/2"72 1/2"

RTG66

3'-6

"3'

-6 1

/2"

36 1

/2"

H a l F - C i r C l e u n i t s G a r d e n - a i r e s l i d i n G p at i O d O O r

Half-Circle units to match inswing

F.s.r.o.

G.s.

F.s.r.o.

G.s.

RTS411

4'-11 3/16"4'-11 11/16"

53 11/16"

2'-8

19/

32"

2'-9

1/8

"27

1/8

"

RTS511

3'-2

19/

32"

3'-3

1/8

"33

1/8

"

5'-11 3/16"5'-11 11/16"

65 11/16"

F.s.r.o.

G.s.

RTS26

2'-6"2'-6 1/2"24 1/2"

1'-6

"1'

-6 1

/2"

12 1

/2"

F.s.r.o.

G.s.

RTS30

3'-0"3'-0 1/2"30 1/2"

1'-9

"1'

-9 1

/2"

15 1

/2"

H a l F - C i r C l e u n i t s i n s w i n G p at i O d O O r

Half-Circle units to match inswing entrance Doors

F.s.r.o.

G.s.

3'-1 3/8"3'-1 7/8"31 7/8"

1'-9

11/

16"

1'-1

0 3/

16"

16 3

/16"

RTXD30

F.s.r.o.

G.s.

RTXD50

F.s.r.o.

G.s.

F.s.r.o.

G.s.

2'-3

31/

32"

2'-4

1/2

"22

1/2

"

4'-1 15/16"4'-2 7/16"42 7/16"

RTXD40

5'-5 15/16"5'-6 7/16"60 7/16"

RTXD542'-1

1 31

/32"

3'-0

1/2

"30

1/2

"

F.s.r.o.

G.s.

3'-3

31/

32"

3'-4

1/2

"34

1/2

"

6'-1 15/16"6'-2 7/16"68 7/16"

RTXD60

5'-1 15/16"5'-2 7/16"56 7/16"

2'-9

31/

32"

2'-1

0 1/

2"28

1/2

"

F.s.r.o.

G.s.

2'-1 3/8"2'-1 7/8"19 7/8"

1'-3

11/

16"

1'-4

3/1

6"10

3/1

6"

RTXD20

F.s.r.o.

G.s.

2'-7 3/8"2'-7 7/8"25 7/8"

1'-6

11/

16"

1'-7

3/1

6"13

3/1

6"

RTXD26

F.s.r.o.

G.s.

2'-9 3/8"2'-9 7/8"27 7/8"

1'-7

11/

16"

1'-8

3/1

6"14

3/1

6"

RTXD28

H a l F - C i r C l e u n i t s i n s w i n G e n t r a n C e d O O r

NOTES:All measurements are nominal. Elevation charts are not to scale.


The units shown are stand-alone units. Adjustments may be required when stacking over other units; adjust-ments will be made in the factory.




PRODUCT CODES:

To order radius units, add “C” before the product number (Ex: CRTG80). Specify inswing entrance door when ordering inswing door half-circles.

F.S. = Frame Size


G.S. = Glass Size



RTS30*

F.s.r.o.

G.s.

2'-2 23/32"2'-3 7/32"

20 1/2"

1'-4

3/8

"1'

-4 7

/8"

10 1

/8"

RTXD20

F.s.r.o.

G.s.21 3/8"2'-3 1/8"2'-2 5/8"

1'-4 5/16"1'-4 13/16"

10 1/16"

(for stationary door)

(for active door)F.s.

r.o.G.s.

2'-8 23/32"2'-9 7/32"

26 1/2"

1'-7

3/8

"1'

-7 7

/8"

13 1

/8"

RTXD26

F.s.r.o.

G.s.27 3/8"2'-9 1/8"2'-8 5/8"

1'-7 5/16"1'-7 13/16"

13 1/16"


(for active door)F.s.

r.o.G.s.

2'-7 11/32"2'-7 27/32"

25 1/8"

1'-6

11/

16"

1'-7

3/1

6"12

7/1

6"

RTS26*

F.s.r.o.

G.s.25"2'-7 3/4"2'-7 1/4"

1'-6 5/8"1'-7 1/8"12 3/8"


(for active door)

F.s.r.o.

G.s.

2'-10 23/32"2'-11 7/32"

28 1/2"

1'-8

3/8

"1'

-8 7

/8"

14 1

/8"

F.s.r.o.

G.s.28 3/8"2'-11 1/8"2'-10 5/8"

1'-8 5/16"1'-8 13/16"

14 1/16"


(for active door)

RTXD28

F.s.r.o.

G.s.

3'-1 11/32"3'-1 27/32"

31 1/8"

1'-9

11/

16"

1'-1

0 3/

16"

15 7

/16"

F.s.r.o.

G.s.31"3'-1 3/4"3'-1 1/4"

1'-9 5/8"1'-10 1/8"

15 3/8"


(for active door)

RTXD30

F.s.r.o.

G.s.

3'-2 23/32"3'-3 7/32"

32 1/2"

1'-1

0 3/

8"1'

-10

7/8"

16 1

/8"

F.s.r.o.

G.s.32 3/8"3'-3 1/8"3'-2 5/8"

1'-10 5/16"1'-10 13/16"

16 1/16"


(for active door)

CLad/CLad ProFiLe dimeNsioNs

SINGLE DOORSH a l F - C i r C l e u n i t s O n e - w i d e O u t s w i n G e n t r a n C e d O O r

NOTES:







* Patio door sizes

PRODUCT CODES:

To order radius units, add “C” before the product number

(Ex: CRTXD��). Specify outswing door, active or stationary.

† RTXD�0 is not available as a true clad unit but can be ordered as clad profile. Add “W” before the product number. Specify outswing entrance door, clad profile.

F.S. = Frame Size


G.S. = Glass Size

RTXD50

RTXD54 RTS511

RTS411

RTXD60

DOUBLE DOORS

r.o.G.s.

F.s.

2'-9

15/

16"

2'-9

13/

16"

27 1

/16"

5'-0 5/8"5'-1 1/8"54 3/8"

r.o.G.s.

F.s.

2'-1

0 11

/16"

2'-1

1 3/

16"

28 7

/16"

5'-3 3/8"5'-3 7/8"57 1/8"

r.o.G.s.

F.s. 3'-0 11/16"3'-1 3/16"30 7/16"

61 1

/8"

5'-7

7/8

"5'

-7 3

/8"

CLad dimeNsioNs

r.o.G.s.

F.s. 3'-3 5/16"3'-3 13/16"

33 1/16"

66 3

/8"

6'-1

1/8

"6'

-0 5

/8"

r.o.G.s.

F.s.

3'-4

11/

16"

3'-5

3/1

6"34

7/1

6"

6'-3 3/8"6'-3 7/8"69 1/8"

r.o.G.s.

WRTXD40†

F.s. 2'-4 11/16"2'-5 3/16"22 7/16"

45 1

/8"

4'-3

7/8

"4'

-3 3

/8"

H a l F - C i r C l e u n i t s t w O - w i d e O u t s w i n G e n t r a n C e d O O r

9� ClassiC series

e l l i p t i C a l u n i t s C a s e m e n t

F.s.r.o.

G.s.

4'-0"4'-0 1/2"43 1/4"

elliptical units to match Casements

1'-6

"1'

-6 1

/2"

13 1

/4"

EHKW2

5'-0"5'-0 1/2"55 1/4"

EHKX2

6'-0"6'-0 1/2"67 1/4"

EHKW3

7'-6"7'-6 1/2"85 1/4"

WEHKX3

8'-0"8'-0 1/2"91 1/4"

WEHKW4

e l l i p t i C a l u n i t s d O u b l e H u n G

F.s.r.o.

G.s.

elliptical units to match Double Hungs

3'-7"3'-7 1/2"37 1/2"

1'-6

"1'

-6 1

/2"

12 1

/2"

4'-3"4'-3 1/2"45 1/2"

4'-11"4'-11 1/2"

53 1/2"

WEH16-2DH WEH20-2DH WEH24-2DH

5'-7"

5'-7 1/2"61 1/2"

6'-3"6'-3 1/2"69 1/2"

EH28-2DH EH32-2DH

6'-11"6'-11 1/2"

77 1/2"

7'-7"7'-7 1/2"85 1/2"

WEH36-2DH WEH40-2DH

F.s.r.o.

G.s.

1'-6

"1'

-6 1

/2"

12 1

/2"

5'-4 1/2

5'-5"59"

6'-4 1/2"6'-5"71"

WEH16-3DH WEH20-3DH

7'-4 1/2"7'-5"83"

8'-4 1/2"8'-5"95"

9'-4 1/2"9'-5"

107 1/8"

10'-4 1/2"10'-5"119"

WEH24-3DH WEH28-3DH WEH32-3DH WEH36-3DH

e l l i p t i C a l u n i t s v i e w p O r t

F.s.r.o.

G.s.

elliptical units to match Viewports

1'-6

"1'

-6 1

/2"

12 1

/2"

WEHK60

6'-5 1/2"6'-6"72"

e l l i p t i C a l u n i t s G a r d e n - a i r e s l i d i n G p at i O d O O r

F.s.r.o.

G.s.

elliptical units to match Garden-aires

1'-6

"1'

-6 1

/2"

12 1

/2"

F.s.r.o.

G.s.

1'-6

"1'

-6 1

/2"

12 1

/2"

5'-0"5'-0 1/2"54 1/2"

6'-0"6'-0 1/2"66 1/2"

7'-11"7'-11 1/2"

89 1/2"

WEHG50 WEHG60

WEHG711

4'-11"4'-11 1/2"

53 1/2"

WEHG411

5'-11"5'-11 1/2"

65 1/2"

WEHG511

8'-0"8'-0 1/2"90 1/2"

WEHG80

6'-6"6'-6 1/2"72 1/2"

WEHG66

NOTES:



The units shown are stand-alone units. Adjustments may be required when stacking over other units;adjustments will be made in the factory.



PRODUCT CODES:

To order units, add “C” for clad before the product number (Ex: CEHKW�).





F.s.r.o.

G.s.

elliptical units to match inswing

1'-6

"1'

-6 1

/2"

12 1

/2"

4'-11 3/16"4'-11 11/16"

53 11/16"

5'-11 3/16"5'-11 11/16"

65 11/16"

WEHS411 EHS511

e l l i p t i C a l u n i t s i n s w i n G e n t r a n C e d O O r

F.s.r.o.

G.s.

elliptical units to match inswing entrance Doors

5'-1 15/16"5'-2 7/16"56 9/16"

1'-6

"1'

-6 1

/2"

12 1

/2"

EHXD50 WEHXD60

4'-1 15/16"4'-2 7/16"44 9/16"

5'-5 15/16"5'-6 7/16"60 9/16"

WEHXD54WEHXD40

6'-1 15/16"6'-2 7/16"68 9/16"

e l l i p t i C a l u n i t s O u t s w i n G e n t r a n C e d O O r

F.s. 5'-7 3/8"5'-7 7/8"60 7/8"

1'-6

"1'

-6 1

/2"

11 7

/8"

6'-3 3/8"6'-3 7/8"68 7/8"

5'-3 3/8"5'-3 7/8"56 7/8"

r.o.G.s.

EHXD50 WEHXD60WEHXD54WEHXD40

outswing entrance elliptical

4'-3 3/8"4'-3 7/8"45 7/8"

e l l i p t i C a l u n i t s O u t s w i n G p at i O d O O r

F.s.r.o.

G.s.

6'-0 5/8"6'-1 1/8"67 1/8"

1'-6

"1'

-6 1

/2"

11 7

/8"

EHS511

5'-0 5/8"5'-1 1/8"55 1/8"

WEHS411

outswing Patio door

e l l i p t i C a l u n i t s i n s w i n G p at i O d O O r

NOTES:


Radius units are sash set as standard. Direct set units are available only in wood.Glass sizes differ for direct set units. Contact your supplier for details.





PRODUCT CODES:

To order units, add “C” for clad before the product number (Ex: CEHXD�0). Specify inswing patio, inswing entrance or outswing entrance door when ordering.


9� ClassiC series

F.s.r.o.

G.s.

Quarter-Circle units to match Casements

F.s.r.o.

G.s.

F.s.r.o.

G.s.

F.s.r.o.

G.s.

1'-8"1'-8 1/2"15 1/4"

1'-1

1"1'

-11

1/2"

18 1

/4"

RTQRN1

2'-0"2'-0 1/2"19 1/4"

2'-3

"2'

-3 1

/2"

22 1

/4"

RTQRW1

2'-9

"2'

-9 1

/2"

28 1

/4"

2'-6"

2'-6 1/2"25 1/4"

RTQRX1

3'-0"3'-0 1/2"31 1/4"

RTQRK30

3'-3

"3'

-3 1

/2"

34 1

/4"

CLad U.d.r.o.

G.s.

4'-3

"4'

-3 1

/2"

46 1

/4"

4'-0"4'-0 1/2"43 1/4"

RTQRW2

Q u a r t e r - C i r C l e u n i t s C a s e m e n t

F.s.r.o.

G.s.

Quarter-Circle units to match Double Hungs

2'-1 1/2"2'-2"20"

2'-4

1/2

"2'

-5"

23"

RTQR20

F.s.r.o.

G.s.

RTQR24

2'-5 1/2"2'-6"24"

2'-8

1/2

"2'

-9"

27"

F.s.r.o.

G.s.

3'-0

1/2

"3'

-1"

31"

2'-9 1/2"

2'-10"28"

RTQR28

F.s.r.o.

G.s.

3'-1 1/2"3'-2"32"

RTQR32

3'-4

1/2

"3'

-5"

35"

Q u a r t e r - C i r C l e u n i t s d O u b l e H u n G

F.s.r.o.

G.s.

Full Circle units

2'-0"2'-0 1/2"19 1/4"

(hei

ghts

equ

al w

idth

s)

2'-6"2'-6 1/2"25 1/4"

3'-0"3'-0 1/2"31 1/4"

3'-6"3'-6 1/2"37 1/4"

4'-0"4'-0 1/2"43 1/4"

6'-0"6'-0 1/2"67 1/4"

FC2-0 FC2-6 FC3-0 FC3-6 FC4-0FC6-0

F u l l C i r C l e u n i t s

F.s.r.o.

G.s.

oval units

1'-8"1'-8 1/2"15 1/4"

2'-0"2'-0 1/2"19 1/4"

3'-0"3'-0 1/2"31 1/4"

2'-6

"2'

-6 1

/2"

25 1

/4"

F.s.r.o.

G.s.

3'-0

"3'

-0 1

/2"

31 1

/4"

F.s.r.o.

G.s.

4'-6

"4'

-6 1

/2"

49 1

/4"

WOV1-8*OV2-0

OV3-0

O va l u n i t s

(casement profile only for clad units)

(casement profile only for clad units)

NOTES:



The units shown are stand-alone units. Adjustments may be required whenstacking over other units; adjustments will be made in the factory.



PRODUCT CODES:

To order clad radius units, add “C” before the product number (Ex: CFC�-0).

* WOV1-8 is not available as a true clad unit, but can be ordered as cladprofile. Use the product number shown and specify clad profile.





Clad Radius Unit Cross Section Drawings

To MatchCasements

To MatchDouble Hungs &

Doors (except Manor)

JamB

siLL

FR

AM

E H

EIG

HT

1 29

/32"

1 29

/32"

FR

AM

E H

EIG

HT

2 7/

8"D

.L.O

D.L

.O.

1 1/16"

2 7/

8"2

7/8"

FR

AM

E H

EIG

HT

D.L

.O.

1 29

/32"

4 9/16"

5 5/8"

4 9/16"

5 5/8"

1 1/16"

1 1/16"

Head

JAMB

SILL

5 7/8"

4 9/16"

11/1

6"

1 13

/16"

FR

AM

E H

EIG

HT

3 1/

4"

5 7/8"

4 9/16"

1 13

/16"

11/1

6"

FR

AM

E W

IDT

H

3 1/

4"

FR

AM

E H

EIG

HT

3 1/

4"

1 13

/16"

5 7/8"

4 9/16"

11/1

6"

Clad radius unit CrOss seCtiOn drawinGs

To MatchCasements

To MatchDouble Hungs &

Doors


Clad radius unit staCKinG detail drawinGs

Stacked over Casements Stacked over Double HungsStacked over Viewportor Garden-Aire Doors

Stacked over Inswing Patio or InswingEntrance Doors

Stacked over Outswing Entrance Doors

9 1/

4"

6 15

/32"

9 1/

4"

6 15

/32"

9 1/

4"

6 15

/32"

98 ClassiC series

Divided Lite Cross Section Drawings

H°K insulating glass with 7/8" WRG

H°K insulating glass with 1-1/8" WRG

H°K insulating glass with �/8" PDL bar

H°K insulating glass with 7/8" ovolo WRG

H°K insulating glass with 1-1/8" ovoloWRG

H°K insulating glass with �/8" ovolo PDL bar

C l a s s i C s e r i e s d i v i d e d l i t e s

divided lite CrOss seCtiOn drawinGs

H°K insulating glass with 7/8" removable grilles

H°K insulating glass with 7/8" ovolo removable grilles


H°K insulating glass with �/8" PDL

H°K insulating glass with �/8" ovolo PDL

H°K insulating glass with 1-1/8" removable grilles

H°K insulating glass with1-1/8" ovolo removable grilles


Divided Lite Cross Section Drawings

H°K insulating glass with 7/8" PDL

H°K insulating glass with 1-1/8" PDL

H°K insulating glass with 1-�/�" PDL bar

H°K insulating glass with �-1/�" PDL bar

H°K insulating glass with 7/8" ovolo PDL

H°K insulating glass with 1-1/8" ovolo PDL

H°K insulating glass with 1-�/�" ovolo PDL bar

H°K insulating glass with �-1/�" ovolo PDL bar

C l a s s i C s e r i e s d i v i d e d l i t e s

divided lite CrOss seCtiOn drawinGs

H°K insulating glass with 1-1/8" PDL

H°K insulating glass with 1-�/�" PDL

H°K insulating glass with 1-1/8" ovolo PDL

H°K insulating glass with 1-�/�" ovolo PDL


H°K insulating glass with �-1/�" PDL

H°K insulating glass with �-1/�" ovolo PDL

H°K insulating glass with 7/8" PDL

H°K insulating glass with 7/8" ovolo PDL

100 ClassiC series

teChniCal Data Clear openinG Data

enerGy perFormanCe Data


Notes For CasemeNt WiNdoWs:

➢ Clear opening widths shown are for standard casements with multi-point locks and concealed hinges. If the following hinge options are used, the clear opening widths will need to be adjusted as noted:

exposed Hinges (a.k.a. euro Hinges) - The Euro hinge is the default hinge used when standard concealed casement hinges can not be utilized (radius head units), or if this type of hinge is requested.

In most cases single-arm operators are used with Euro hinges, which changes the clear opening widths. For units with this type of hinge, add 3-7/16" to widths shown for one sash open. For French casements add 6-7/8" to widths shown for two sash open. Two sash open may or may not be considered as an acceptable emergency escape and rescue opening per the local building inspector. Please remember that if box locks and exposed hinges are used together, the adjustments must be combined.

➢ All dimensions are taken with sash open to 90°, except for an “E” Series unit with dual-arm operator and concealed hinges, which opens to 75°.➢ Shaded units meet most national building codes for emergency escape and rescue requirements.

deFiNitioNs oF aCCePtaBLe emerGeNCY esCaPe & resCUe oPeNiNGs:

“Egress” has long been the term used to describe the clear opening dimensions of a window or door necessary to enter or exit a building in case of an emergency. With the release of the International Building Code (IBC) and International Residential Code (IRC), “egress” is no longer the appropriate term.

The International Codes (IBC 2000 & 2003, IRC 2000 & 2003) now use the phrase “Emergency Escape & Rescue Opening.” IBC and IRC have set the following as basic requirements for Emergency Escape & Rescue Openings.

➢ Minimum Opening Width: 20 inches (508 mm)➢ Minimum Opening Height: 24 inches (610 mm)➢ Minimum Opening Area: 5.7 sq. ft. (0.53 m2)

Note:Please check your local codes to confirm that these Emergency Escape & Rescue Opening requirements are applicable. Other require-ments may also apply.

C l e a r O p e n i n G d i m e n s i O n s

roUGH oPeNiNG reCommeNdatioNs:

The Kolbe standard rough opening dimensions published in our product literature are provided as a guideline to maintain a minimum 1/4” space between the window or patio door and the building structure. There are certain situations where Kolbe recommends a gap larger than our published 1/4” standard:

➢ When installation clips are used, the gap should be increased to 1/2” on the sides, top and bottom of the unit.➢ When mulls are installed in the opening, the gap all around should be increased to 1/2”. For installation consistency, the same gap should be used on all units in the project.➢ If a sill pan drainage system is used, the gap should be increased to 1/2” on the top and bottom of the unit.

Because every installation is different, Kolbe strongly recommends consultation with the local supplier or an experienced contractor, architect or structural engineer prior to the installation of any Kolbe product. Installation of Kolbe products, including sizing of rough opening, method of attachment, fastener selection, and code compliance is the sole responsibility of the architect, building owner, contractor and/or consumer. Unless otherwise specified, if units are ordered by rough opening, Kolbe will size the units using our standard minimum 1/4” gap - regardless of the options or construction of the product ordered.

Product #

sq. Ft. Clear opg.

Clear openingsq. Ft. d.L.o.

sq. Ft. Vent

sq. Ft. of Unit Frame dim.

Width Height

Casements

S12 0.99 7-5/16" 19-1/2" 1.30 1.59 2.67

S126 1.29 7-5/16" 25-1/2" 1.73 2.08 3.33

S13 1.60 7-5/16" 31-1/2" 2.15 2.57 4.00

S136 1.90 7-5/16" 37-1/2" 2.58 3.06 4.67

S14 2.21 7-5/16" 43-1/2" 3.01 3.55 5.33

S146 2.51 7-5/16 49-1/2" 3.43 4.04 6.00

S15 2.82 7-5/16" 55-1/2" 3.86 4.53 6.67

S156 3.12 7-5/16" 61-1/2" 4.29 5.02 7.33

S16 3.43 7-5/16" 67-1/2" 4.72 5.51 8.00

N12 1.53 11-5/16" 19-1/2" 1.81 2.13 3.33

N126 2.00 11-5/16" 25-1/2" 2.40 2.79 4.17

N13 2.47 11-5/16" 31-1/2" 2.99 3.45 5.00

N136 2.95 11-5/16" 37-1/2" 3.59 4.10 5.83

N14 3.42 11-5/16" 43-1/2" 4.18 4.76 6.67

N146 3.89 11-5/16" 49-1/2" 4.77 5.41 7.50

N15 4.36 11-5/16" 55-1/2" 5.37 6.07 8.33

N156 4.83 11-5/16" 61-1/2" 5.96 6.73 9.17

N16 5.30 11-5/16" 67-1/2" 6.56 7.83 10.00

W12 2.07 15-5/16" 19-1/2" 2.31 2.67 4.00

W126 2.71 15-5/16" 25-1/2" 3.07 3.50 5.00

W13 3.35 15-5/16" 31-1/2" 3.83 4.32 6.00

W136 3.99 15-5/16" 37-1/2" 4.59 5.14 7.00

W14 4.63 15-5/16" 43-1/2" 5.35 5.97 8.00

W146 5.26 15-5/16" 49-1/2" 6.12 6.79 9.00

W15 5.90 15-5/16" 55-1/2" 6.88 7.61 10.00

W156 6.54 15-5/16" 61-1/2" 7.64 8.43 11.00

W16 7.18 15-5/16" 67-1/2" 8.40 9.26 12.00

L12 2.62 19-5/16" 19-1/2" 2.82 3.22 4.67

L126 3.42 19-5/16" 25-1/2" 3.75 4.21 5.83

L13 4.22 19-5/16" 31-1/2" 4.67 5.20 7.00

L136 5.03 19-5/16" 37-1/2" 5.60 6.18 8.17

L14 5.83 19-5/16" 43-1/2" 6.53 7.17 9.33

L146 6.64 19-5/16" 49-1/2" 7.46 8.16 10.50

L15 7.44 19-5/16" 55-1/2" 8.38 9.15 11.67

L156 8.25 19-5/16" 61-1/2" 9.31 10.14 12.83

L16 9.05 19-5/16" 67-1/2" 10.24 11.13 14.00

X12 2.89 21-5/16" 19-1/2" 3.07 3.49 5.00

X126 3.77 21-5/16" 25-1/2" 4.08 4.56 6.25

X13 4.66 21-5/16" 31-1/2" 5.09 5.63 7.50

X136 5.55 21-5/16" 37-1/2" 6.10 6.71 8.75

X14 6.44 21-5/16" 43-1/2" 7.12 7.78 10.00

X146 7.33 21-5/16" 49-1/2" 8.13 8.85 11.25

X15 8.21 21-5/16" 55-1/2" 9.14 9.92 12.50

X156 9.10 21-5/16" 61-1/2" 10.15 11.00 13.75

X16 9.99 21-5/16" 67-1/2" 11.16 12.07 15.00

E13 5.63 25-3/4" 31-1/2" 6.35 6.95 9.00

10� ClassiC series


Product #

sq. Ft. Clear opg.


sq. Ft. Vent

sq. Ft. of Unit Frame

dim.Width Height

Casements (continued)

E136 6.71 25-3/4" 37-1/2" 7.62 8.27 10.50

E14 7.78 25-3/4" 43-1/2" 8.88 9.59 12.00

E146 8.85 25-3/4" 49-1/2" 10.14 10.91 13.50

E15 9.92 25-3/4" 55-1/2" 11.40 12.24 15.00

E156 11.00 25-3/4" 61-1/2" 12.66 13.56 16.50

E16 12.07 25-3/4" 67-1/2" 13.92 14.88 18.00

Product#

sq. Ft. Clear opg.

Clear opg. WidthClear opg. Ht.

sq. Ft.

d.L.o.

sq. Ft.

Vent

sq. Ft. of Unit

Frame dim.

1 open

2 open

1 open 2 open

French Casements

N23 2.66 5.71 12-3/16" 26-3/16" 31-3/8" 6.35 7.93 10.00

N236 3.16 6.80 12-3/16" 26-3/16" 37-3/8" 7.62 9.44 11.67

N24 3.67 7.89 12-3/16" 26-3/16" 43-3/8" 8.88 10.96 13.33

N246 4.18 8.98 12-3/16" 26-3/16" 49-3/8" 10.14 12.47 15.00

N25 4.69 10.07 12-3/16" 26-3/16" 55-3/8" 11.40 13.99 16.67

N256 5.19 11.16 12-3/16" 26-3/16" 61-3/8" 12.66 15.50 18.33

N26 5.70 12.25 12-3/16" 26-3/16" 67-3/8" 13.92 17.02 20.00

W23 3.53 7.45 16-3/16" 34-3/16" 31-3/8" 8.04 9.67 12.00

W236 4.20 8.87 16-3/16" 34-3/16" 37-3/8" 9.63 11.52 14.00

W24 4.88 10.30 16-3/16" 34-3/16" 43-3/8" 11.22 13.37 16.00

W246 5.55 11.72 16-3/16" 34-3/16" 49-3/8" 12.82 15.22 18.00

W25 6.22 13.15 16-3/16" 34-3/16" 55-3/8" 14.41 17.06 20.00

X23 4.83 10.06 22-3/16" 46-3/16" 31-3/8" 10.56 12.28 15.00

X236 5.76 11.99 22-3/16" 46-3/16" 37-3/8" 12.65 14.63 17.50

X24 6.68 13.91 22-3/16" 46-3/16" 43-3/8" 14.74 16.98 20.00

X246 7.61 15.84 22-3/16" 46-3/16" 49-3/8" 16.84 19.33 22.50

X25 8.53 17.76 22-3/16" 46-3/16" 55-3/8" 18.93 21.68 25.00

Notes For aWNiNG WiNdoWs:➣ Awnings may not be considered emergency and rescue windows.➣ Clear opening dimensions determined after unhooking and retracting operator arms and pushing sash open to 90º.➣ If multi-point locks are used deduct 5/8" from the clear opening widths show here.➣ If exposed (Euro) hinges are used in lieu of concealed hinges, add 3-3/8" to the clear opening heights shown here.

Product #

sq. Ft.

Clear opg.


sq. Ft. Vent


Width Height

Awnings

26181 1.97 26-3/8" 10-3/4" 2.40 1.48 4.17

30181 2.42 32-3/8" 10-3/4" 2.99 1.82 5.00

36181 2.86 38-3/8" 10-3/4" 3.59 2.15 5.83

40181 3.31 44-3/8" 10-3/4" 4.18 2.49 6.67

26201 2.70 26-3/8" 14-3/4" 3.07 1.48 5.00

30201 3.32 32-3/8" 14-3/4" 3.83 1.82 6.00

36201 3.93 38-3/8" 14-3/4" 4.59 2.15 7.00

40201 4.55 44-3/8" 14-3/4" 5.35 2.49 8.00

26261 3.80 26-3/8" 20-3/4" 4.08 1.48 6.25

30261 4.67 32-3/8" 20-3/4" 5.09 1.82 7.50

36261 5.53 38-3/8" 20-3/4" 6.10 2.15 8.75

40261 6.39 44-3/8" 20-3/4" 7.12 2.49 10.00

26301 4.90 26-3/8" 26-3/4" 5.09 1.48 7.50

30301 6.01 32-3/8" 26-3/4" 6.35 1.82 9.00

36301 7.13 38-3/8" 26-3/4" 7.62 2.15 10.50

40301 8.24 44-3/8" 26-3/4" 8.88 2.49 12.00



Product#

sq. Ft. Clear opg.


sq. Ft.

Vent


Width Height

Traditional Double Hungs

1614 1.70 18-1/4" 13-7/16" 2.71 1.70 5.44

1616 1.96 18-1/4" 15-7/16" 3.13 1.96 6.04

1620 2.46 18-1/4" 19-7/16" 3.96 2.46 7.23

1622 2.72 18-1/4" 21-7/16" 4.38 2.72 7.83

1624 2.97 18-1/4" 23-7/16" 4.79 2.97 8.43

1626 3.22 18-1/4" 25-7/16" 5.21 3.22 9.02

1628 3.48 18-1/4" 27-7/16" 5.63 3.48 9.62

1630 3.73 18-1/4" 29-7/16" 6.04 3.73 10.22

1632 3.98 18-1/4" 31-7/16" 6.46 3.98 10.82

1634 4.24 18-1/4" 33-7/16" 6.88 4.24 11.41

1636 4.49 18-1/4" 35-7/16" 7.29 4.49 12.01

2014 2.08 22-1/4" 13-7/16" 3.43 2.08 6.45

2016 2.39 22-1/4" 15-7/16" 3.96 2.39 7.16

2020 3.00 22-1/4" 19-7/16" 5.01 3.00 8.58

2022 3.31 22-1/4" 21-7/16" 5.54 3.31 9.29

2024 3.62 22-1/4" 23-7/16" 6.07 3.62 9.99

2026 3.93 22-1/4" 25-7/16" 6.60 3.93 10.70

2028 4.24 22-1/4" 27-7/16" 7.13 4.24 11.41

2030 4.55 22-1/4" 29-7/16" 7.65 4.55 12.12

2032 4.86 22-1/4" 31-7/16" 8.18 4.86 12.83

2034 5.17 22-1/4" 33-7/16" 8.71 5.17 13.54

2036 5.48 22-1/4" 35-7/16" 9.24 5.48 14.24

2414 2.45 26-1/4" 13-7/16" 4.15 2.45 7.47

2416 2.81 26-1/4" 15-7/16" 4.79 2.81 8.28

2420 3.54 26-1/4" 19-7/16" 6.07 3.54 9.92

2422 3.91 26-1/4" 21-7/16" 6.71 3.91 10.74

2424 4.27 26-1/4" 23-7/16" 7.35 4.27 11.56

2426 4.64 26-1/4" 25-7/16" 7.99 4.64 12.38

2428 5.00 26-1/4" 27-7/16" 8.63 5.00 13.20

2430 5.37 26-1/4" 29-7/16" 9.26 5.37 14.02

2432 5.73 26-1/4" 31-7/16" 9.90 5.73 14.84

2434 6.10 26-1/4" 33-7/16" 10.54 6.10 15.66

2436 6.46 26-1/4" 35-7/16" 11.18 6.46 16.48

2614 2.64 28-1/4" 13-7/16" 4.51 2.64 7.97

2616 3.03 28-1/4" 15-7/16" 5.21 3.03 8.85

2620 3.81 28-1/4" 19-7/16" 6.60 3.81 10.60

2622 4.21 28-1/4" 21-7/16" 7.29 4.21 11.47

2624 4.60 28-1/4" 23-7/16" 7.99 4.60 12.35

2626 4.99 28-1/4" 25-7/16" 8.68 4.99 13.22

2628 5.38 28-1/4" 27-7/16" 9.38 5.38 14.10

2630 5.77 28-1/4" 29-7/16" 10.07 5.77 14.97

2632 6.17 28-1/4" 31-7/16" 10.76 6.17 15.85

2634 6.56 28-1/4" 33-7/16" 11.46 6.56 16.72

2636 6.95 28-1/4" 35-7/16" 12.15 6.95 17.60

2814 2.82 30-1/4" 13-7/16" 4.88 2.82 8.48

2816 3.24 30-1/4" 15-7/16" 5.63 3.24 9.41

Product#

sq. Ft. Clear opg.


sq. Ft.

Vent


Width Height

Traditional Double Hungs (continued)

2820 4.08 30-1/4" 19-7/16" 7.13 4.08 11.27

2822 4.50 30-1/4" 21-7/16" 7.88 4.50 12.20

2824 4.92 30-1/4" 23-7/16" 8.63 4.92 13.13

2826 5.34 30-1/4" 25-7/16" 9.38 5.34 14.06

2828 5.76 30-1/4" 27-7/16" 10.13 5.76 14.99

2830 6.18 30-1/4" 29-7/16" 10.88 6.18 15.92

2832 6.60 30-1/4" 31-7/16" 11.63 6.60 16.85

2834 7.02 30-1/4" 33-7/16" 12.38 7.02 17.78

2836 7.44 30-1/4" 35-7/16" 13.13 7.44 18.71

3014 3.01 32-1/4" 13-7/16" 5.24 3.01 8.98

3016 3.46 32-1/4" 15-7/16" 6.04 3.46 9.97

3020 4.35 32-1/4" 19-7/16" 7.65 4.35 11.94

3022 4.80 32-1/4" 21-7/16" 8.46 4.80 12.93

3024 5.25 32-1/4" 23-7/16" 9.26 5.25 13.91

3026 5.70 32-1/4" 25-7/16" 10.07 5.70 14.90

3028 6.14 32-1/4" 27-7/16" 10.88 6.14 15.89

3030 6.59 32-1/4" 29-7/16" 11.68 6.59 16.87

3032 7.04 32-1/4" 31-7/16" 12.49 7.04 17.86

3034 7.49 32-1/4" 33-7/16" 13.29 7.49 18.84

3036 7.94 32-1/4" 35-7/16" 14.10 7.94 19.83

3214 3.20 34-1/4" 13-7/16" 5.60 3.20 9.49

3216 3.67 34-1/4" 15-7/16" 6.46 3.67 10.53

3220 4.62 34-1/4" 19-7/16" 8.18 4.62 12.61

3222 5.10 34-1/4" 21-7/16" 9.04 5.10 13.66

3224 5.57 34-1/4" 23-7/16" 9.90 5.57 14.70

3226 6.05 34-1/4" 25-7/16" 10.76 6.05 15.74

3228 6.53 34-1/4" 25-7/16" 11.63 6.53 16.78

3230 7.00 34-1/4" 29-7/16" 12.49 7.00 17.82

3232 7.48 34-1/4" 31-7/16" 13.35 7.48 18.86

3234 7.95 34-1/4" 33-7/16" 14.21 7.95 19.91

3236 8.43 34-1/4" 35-7/16" 15.07 8.43 20.95

3614 3.57 38-1/4" 13-7/16" 6.32 3.57 10.50

3616 4.10 38-1/4" 15-7/16" 7.29 4.10 11.65

3620 5.16 38-1/4" 19-7/16" 9.24 5.16 13.96

3622 5.69 38-1/4" 21-7/16" 10.21 5.69 15.11

3624 6.23 38-1/4" 23-7/16" 11.18 6.23 16.27

3626 6.76 38-1/4" 25-7/16" 12.15 6.76 17.42

3628 7.29 38-1/4" 27-7/16" 13.13 7.29 18.57

3630 7.82 38-1/4" 29-7/16" 14.10 7.82 19.72

3632 8.35 38-1/4" 31-7/16" 15.07 8.35 20.88

3634 8.88 38-1/4" 33-7/16" 16.04 8.88 22.03

3636 9.41 38-1/4" 35-7/16" 17.01 9.41 23.18

4014 3.94 42-1/4" 13-7/16" 7.04 3.94 11.51

4016 4.53 42-1/4" 15-7/16" 8.13 4.53 12.78

4020 5.70 42-1/4" 19-7/16" 10.29 5.70 15.31

4022 6.29 42-1/4" 21-7/16" 11.38 6.29 16.57


Product#

sq. Ft. Clear opg.


sq. Ft. Vent


Width Height

Double Sliders

1616 1.94 15-3/8" 18-1/8" 3.13 1.94 6.10

1620 2.36 15-3/8" 22-1/8" 3.96 2.36 7.17

1624 2.79 15-3/8" 26-1/8" 4.79 2.79 8.24

1628 3.22 15-3/8" 30-1/8" 5.63 3.22 9.31

1632 3.64 15-3/8" 34-1/8" 6.46 3.64 10.38

1636 4.07 15-3/8" 38-1/8" 7.29 4.07 11.45

1640 4.50 15-3/8" 42-1/8" 8.13 4.50 12.52

1644 4.92 15-3/8" 46-1/8" 8.96 4.92 13.59

1648 5.35 15-3/8" 50-1/8" 9.79 5.35 14.65

2016 2.44 19-3/8" 18-1/8" 3.96 2.44 7.37

2020 2.98 19-3/8" 22-1/8" 5.01 2.98 8.66

2024 3.52 19-3/8" 26-1/8" 6.07 3.52 9.95

2028 4.05 19-3/8" 30-1/8" 7.13 4.05 11.24

2032 4.59 19-3/8" 34-1/8" 8.18 4.59 12.53

2036 5.13 19-3/8" 38-1/8" 9.24 5.13 13.82

2040 5.67 19-3/8" 42-1/8" 10.29 5.67 15.12

2044 6.21 19-3/8" 46-1/8" 11.35 6.21 16.41

2048 6.74 19-3/8" 50-1/8" 12.40 6.74 17.70

2416 2.94 23-3/8" 18-1/8" 4.79 2.94 8.63

2420 3.59 23-3/8" 22-1/8" 6.07 3.59 10.15

2424 4.24 23-3/8" 26-1/8" 7.35 4.24 11.66

2428 4.89 23-3/8" 30-1/8" 8.63 4.89 13.18

2432 5.54 23-3/8" 34-1/8" 9.90 5.54 14.69

2436 6.19 23-3/8" 38-1/8" 11.18 6.19 16.20

2440 6.84 23-3/8" 42-1/8" 12.46 6.84 17.72

2444 7.49 23-3/8" 46-1/8" 13.74 7.49 19.23

2448 8.14 23-3/8" 50-1/8" 15.01 8.14 20.74

2816 3.45 27-3/8" 18-1/8" 5.63 3.45 9.90

2820 4.21 27-3/8" 22-1/8" 7.13 4.21 11.64

2824 4.97 27-3/8" 26-1/8" 8.63 4.97 13.37

2828 5.73 27-3/8" 30-1/8" 10.13 5.73 15.11

2832 6.49 27-3/8" 34-1/8" 11.63 6.49 16.85

2836 7.25 27-3/8" 38-1/8" 13.13 7.25 18.58

2840 8.01 27-3/8" 42-1/8" 14.63 8.01 20.32

2844 8.77 27-3/8" 46-1/8" 16.13 8.77 22.05

2848 9.53 27-3/8" 50-1/8" 17.63 9.53 23.79

3216 3.95 31-3/8" 18-1/8" 6.46 3.95 11.17

3220 4.82 31-3/8" 22-1/8" 8.18 4.82 13.13

3224 5.69 31-3/8" 26-1/8" 9.90 5.69 15.09

3228 6.56 31-3/8" 30-1/8" 11.63 6.56 17.04

3232 7.44 31-3/8" 34-1/8" 13.35 7.44 19.00

3236 8.31 31-3/8" 38-1/8" 15.07 8.31 20.96

3240 9.18 31-3/8" 42-1/8" 16.79 9.18 22.92

3244 10.05 31-3/8" 46-1/8" 18.51 10.05 24.88

3248 10.92 31-3/8" 50-1/8" 20.24 10.92 26.84


Notes For doUBLe HUNG WiNdoWs:➢ Shaded units meet most national building codes for emergency escape and rescue requirements.

Product#

sq. Ft. Clear opg.


sq. Ft. Vent


Width Height

Traditional Double Hungs (continued)

4028 8.05 42-1/4" 27-7/16" 14.63 8.05 20.36

4030 8.64 42-1/4" 29-7/16" 15.71 8.64 21.63

4032 9.22 42-1/4" 31-7/16" 16.79 9.22 22.89

4034 9.81 42-1/4" 33-7/16" 17.88 9.81 24.15

4036 10.40 42-1/4" 35-7/16" 18.96 10.40 25.42

1624/36 2.97 18-1/4" 23-7/16" 6.04 2.97 10.22

2024/36 3.62 22-1/4" 23-7/16" 7.65 3.62 12.12

2424/36 4.27 26-1/4" 23-7/16" 9.26 4.27 14.02

2824/36 4.92 30-1/4" 23-7/16" 10.88 4.92 15.92

3224/36 5.57 34-1/4" 23-7/16" 12.49 5.57 17.82

3624/36 6.23 38-1/4" 23-7/16" 14.10 6.23 19.72

4024/36 6.88 42-1/4" 23-7/16" 15.71 6.88 21.63

4024 6.88 42-1/4" 23-7/16" 12.46 6.88 17.83

4026 7.46 42-1/4" 25-7/16" 13.54 7.46 19.10


Product#

sq. Ft. Clear opg.


sq. Ft.

Vent


Width Height

Triple Sliders

163232 4.13 17-7/16" 34-1/8" 13.02 6.78 19.27

163240 5.10 17-7/16" 42-1/8" 16.39 8.37 23.24

163244 5.59 17-7/16" 46-1/8" 18.07 9.17 25.23

163248 6.07 17-7/16" 50-1/8" 19.75 9.96 27.22

204032 5.08 21-7/16" 34-1/8" 16.47 8.68 23.58

204040 6.27 21-7/16" 42-1/8" 20.72 10.71 28.44

204044 6.87 21-7/16" 46-1/8" 22.84 11.73 30.88

204048 7.46 21-7/16" 50-1/8" 24.97 12.75 33.31

204832 5.08 21-7/16" 34-1/8" 18.19 9.67 25.74

204840 6.27 21-7/16" 42-1/8" 22.89 11.94 31.05

204844 6.87 21-7/16" 46-1/8" 25.23 13.07 33.70

204848 7.46 21-7/16" 50-1/8" 27.58 14.21 36.35

244832 6.03 25-7/16" 34-1/8" 19.91 10.58 27.90

244840 7.44 25-7/16" 42-1/8" 25.05 13.05 33.65

244844 8.15 25-7/16" 46-1/8" 27.62 14.29 36.52

244848 8.85 25-7/16" 50-1/8" 30.19 15.53 39.40


Notes For sLider WiNdoWs:➢ Shaded units meet most national building codes for emergency escape and rescue requirements.

Product#

sq. Ft. Clear opg.


sq. Ft. Vent

sq. Ft. of Unit Frame dim

Width Height

Viewport Sliding Patio Doors

6068 18.09 32-7/8" 79-1/4" 34.17 18.09 44.40

Product#

sq. Ft. Clear opg.


sq. Ft. Vent

sq. Ft. of Unit Frame dim

Width Height

Garden-Aire Sliding Patio Doors

2968 – – – 12.46 – 18.61

3368 – – – 15.55 – 22.04

3668 – – – 17.09 – 28.91

4368 – – – 21.71 – 28.91

2980 – – – 15.16 – 22.22

3380 – – – 18.91 – 26.32

3680 – – – 20.78 – 28.37

4380 – – – 26.41 – 34.52

5068 12.01 22" 78-5/8" 24.92 12.01 34.35

6068 15.29 28" 78-5/8" 31.09 15.29 41.22

6668 16.93 31" 78-5/8" 34.17 16.93 44.65

8068 21.84 40" 78-5/8" 43.42 21.84 54.96

5080 14.46 22" 94-5/8" 30.31 14.46 41.02

6080 18.40 28" 94-5/8" 37.81 18.40 49.22

6680 20.37 31" 94-5/8" 41.56 20.37 53.32

8080 26.28 40" 94-5/8" 52.81 26.28 65.63

7968 12.01 22" 78-5/8" 37.39 12.01 52.95

9368 15.29 28" 78-5/8" 46.64 15.29 63.26

10068 16.93 31" 78-5/8" 51.26 16.93 68.41

12368 21.84 40" 78-5/8" 65.14 21.84 83.87

7980 14.46 22" 94-5/8" 45.47 14.46 63.23

9380 18.40 28" 94-5/8" 56.72 18.40 75.54

10080 20.37 31" 94-5/8" 62.34 20.37 81.69

12380 26.28 40" 94-5/8" 79.22 26.28 100.15

2866 – – – 10.72 – 17.76

3266 – – – 14.77 – 21.09

4266 – – – 20.73 – 27.76

41166 11.37 21-1/2" 76-1/8" 23.59 11.37 32.75

51166 14.54 27-1/2" 76-1/8" 29.54 14.54 39.41

71166 20.88 39-1/2" 76-1/8" 41.46 20.88 52.74

7766 11.37 21-1/2" 76-1/8" 35.38 11.37 50.52

9166 14.54 27-1/2" 76-1/8" 44.32 14.54 60.51

12166 20.88 39-1/2" 76-1/8" 62.19 20.88 80.49

Garden-Aire Sliding Patio Doors, remodeling sizes



Product#

sq. Ft. Clear opg.

Clear opg. Width Clear

opg. Ht.

sq. Ft.

d.L.o.

sq. Ft.

Vent

sq. Ft. of Unit

Frame dim.

1 open

2 open

1 open

2 open

Inswing Entrance Doors - 1-wide

2068 11.67 – 21-1/8" – 79-9/16" 6.93 12.71 14.72

2668 14.99 – 27-1/8" – 79-9/16" 9.76 16.02 18.17

2868 16.09 – 29-1/8" – 79-9/16" 10.70 17.13 19.32

3068 18.30 – 33-1/8" – 79-9/16" 12.59 19.34 21.61

2070 12.26 – 21-1/8" – 83-9/16" 7.33 13.35 15.43

2670 15.74 – 27-1/8" – 83-9/16" 10.33 16.83 19.05

2870 16.90 – 29-1/8" – 83-9/16" 11.33 17.99 20.25

3070 19.22 – 33-1/8" – 83-9/16" 13.33 20.31 22.66

2080 14.02 – 21-1/8" – 95-9/16" 8.56 15.26 17.57

2680 18.00 – 27-1/8" – 95-9/16" 12.05 19.25 21.68

2880 19.33 – 29-1/8" – 95-9/16" 13.22 20.57 23.05

3080 21.98 – 33-1/8" – 95-9/16" 15.55 23.23 25.79

Inswing Entrance Doors - �-wide (stationary/active)

4068 11.67 – 21-1/8" – 79-9/16" 13.85 12.68 28.83

5068 14.99 – 27-1/8" – 79-9/16" 19.51 16.00 35.72

5468 16.09 – 29-1/8" – 79-9/16" 21.40 17.10 38.02

6068 18.30 – 33-1/8" – 79-9/16" 25.17 19.31 42.62

4070 12.26 – 21-1/8" – 83-9/16" 14.67 13.32 30.22

5070 15.74 – 27-1/8" – 83-9/16" 20.66 16.80 37.45

5470 16.90 – 29-1/8" – 83-9/16" 22.66 17.96 39.86

6070 19.22 – 33-1/8" – 83-9/16" 26.65 20.28 44.68

4080 14.02 – 21-1/8" – 95-9/16" 17.12 15.23 34.41

5080 18.00 – 27-1/8" – 95-9/16" 24.11 19.21 42.63

5480 19.33 – 29-1/8" – 95-9/16" 26.44 20.54 45.38

6080 21.98 – 33-1/8" – 96-9/16" 31.10 23.20 50.86

Inswing Entrance Doors - French

4068 11.67 22.65 21-1/8" 41" 79-9/16" 13.85 26.28 28.83

5068 14.99 29.28 27-1/8" 53" 79-9/16" 19.51 32.91 35.72

5468 16.09 31.49 29-1/8" 57" 79-9/16" 21.40 35.12 38.02

6068 18.30 35.91 33-1/8" 65" 79-9/16" 25.17 39.54 42.62

4070 12.26 23.79 21-1/8" 41" 83-9/16" 14.67 27.60 30.22

5070 15.74 30.76 27-1/8" 53" 83-9/16" 20.66 34.56 37.45

5470 16.90 33.08 29-1/8" 57" 83-9/16" 22.66 36.89 39.86

6070 19.22 37.72 33-1/8" 65" 83-9/16" 26.65 41.53 44.68

4080 14.02 27.21 21-1/8" 41" 95-9/16" 17.12 31.56 34.41

5080 18.00 35.17 27-1/8" 53" 95-9/16" 24.11 39.53 42.63

5480 19.33 37.83 29-1/8" 57" 95-9/16" 26.44 42.18 45.38

6080 21.98 43.14 33-1/8" 65" 95-9/16" 31.10 47.49 50.86

Notes For iNsWiNG eNtraNCe doors:➢ For units with optional oak or handicap sills, add 5/8" to the clear opening heights.➢ One or both sash open to 90º.

Product#

sq. Ft. Clear opg.

Clear opg. Width Clear

opg. Height

sq. Ft.

d.L.o.

sq. Ft.

Vent

sq. Ft. of Unit

Frame dim.

1 open

2 open

1 open

2 open

Inswing Patio Doors - 1-wide

2666 13.65 – 25-3/4" – 76-11/32" 8.68 14.65 16.70

3066 16.83 – 31-3/4" – 76-11/32" 11.37 17.83 20.01

2680 16.53 – 25-3/4" – 92-7/16" 10.83 17.73 20.08

3080 20.38 – 31-3/4" 92-7/16" 14.20 21.58 24.06

Inswing Patio Doors - �-wide (stationary/active)

41166 13.65 – 25-3/4" – 76-11/32" 17.35 14.62 32.81

51166 16.83 – 31-3/4" – 76-11/32" 22.74 17.80 39.44

41180 16.53 – 25-3/4" – 92-7/16" 21.67 17.70 39.46

51180 20.38 – 31-3/4" – 92-7/16" 28.40 21.55 47.42

Inswing Patio Doors - French

41166 13.65 26.64 25-3/4" 50-1/4" 76-11/32" 17.35 30.12 32.81

51166 16.83 33.00 31-3/4" 62-1/4" 76-11/32" 22.74 36.48 39.44

41180 16.53 32.26 25-3/4" 50-1/4" 92-7/16" 21.67 36.47 39.46

51180 20.38 39.96 31-3/4" 62-1/4" 92-7/16" 28.40 44.17 47.42

Inswing Patio Doors - �-wide (stationary/active/stationary)

7566 13.65 – 25-3/4" – 76-11/32" 26.03 14.62 48.93

81166 16.83 – 31-3/4" – 76-11/32" 34.11 17.80 58.87

7580 16.53 – 25-3/4" – 92-7/16" 32.50 17.70 58.83

81180 20.38 – 31-3/4" – 92-7/16" 42.60 21.55 70.78

Notes For iNsWiNG Patio doors:➢ For units with handicap sills, add 5/8" to the clear opening heights.➢ One or both sash open to 90º



Product#

sq. Ft. Clear opg.

Clear opg. WidthClear

opg. Ht.

sq. Ft.

d.L.o.

sq. Ft.

Vent


1 open

2 open

1 open

2 open

Outswing Doors - patio sizes, 1-wide

2666 13.60 – 25-27/32" – 75-25/32" 8.68 14.59 17.33

3066 16.76 – 31-27/32" – 75-25/32" 11.37 17.74 20.65

2680 16.49 – 25-27/32" – 91-7/8" 10.83 17.69 20.83

3080 20.32 – 31-27/32" – 91-7/8" 14.19 21.51 24.82

Outswing Doors - patio sizes, �-wide (stationary/active)

41166 13.60 – 25-27/32" – 75-25/32" 17.35 14.57 33.52

51166 16.76 – 31-27/32" – 75-25/32" 22.74 17.73 40.16

41180 16.49 – 25-27/32" – 91-7/8" 21.66 17.67 40.30

51180 20.32 – 31-27/32" – 91-7/8" 28.39 21.49 48.27

Outswing Doors - patio sizes, French

41166 13.60 27.13 25-27/32" 51-9/16" 75-25/32" 17.35 30.00 33.52

51166 16.76 33.45 31-27/32" 63-9/16" 75-25/32" 22.74 36.31 40.16

41180 16.49 32.90 25-27/32" 51-9/16" 91-7/8" 21.66 36.37 40.30

51180 20.32 40.55 31-27/32" 63-9/16" 91-7/8" 28.39 44.02 48.27

Outswing Doors - patio sizes, �-wide (stationary/active/stationary)

7566 13.60 – 25-27/32" – 75-25/32" 26.03 14.57 49.97

81166 16.76 – 31-27/32" – 75-25/32" 34.11 17.73 59.93

7580 16.49 – 25-27/32" – 91-7/8" 32.49 17.66 60.07

81180 20.32 – 31-27/32" – 91-7/8" 42.58 21.49 72.04

Notes For oUtsWiNG Patio doors:➢ For units with handicap sills, add 1-1/8" to the clear opening heights.➢ One or both sash open to 90º.

108 ClassiC series

Product#

sq. Ft. Clear opg.

Clear opg. WidthClear opg. Ht.

sq. Ft.

d.L.o.

sq. Ft.

Vent

sq. Ft. of Unit

Frame dim.

1 open

2 open

1 open 2 open

Outswing Entrance Doors - 1-wide

2068 11.64 – 21-7/32" – 79" 6.92 12.67 15.37

2668 14.93 – 27-7/32" – 79" 9.75 15.96 18.82

2868 16.03 – 29-7/32" – 79" 10.69 17.06 19.97

3068 18.22 – 33-7/32" – 79" 12.57 19.25 22.28

2070 12.23 – 21-7/32" – 83" 7.33 13.31 16.11

2670 15.69 – 27-7/32" – 83" 10.32 16.77 19.73

2870 16.84 – 29-7/32" – 83" 11.32 17.92 20.94

3070 19.15 – 33-7/32" – 83" 13.32 20.23 23.35

2080 14.00 – 21-7/32" – 95" 8.55 15.24 18.34

2680 17.96 – 27-7/32" – 95" 12.05 19.19 22.46

2880 19.28 – 29-7/32" – 95" 13.21 20.51 23.83

3080 21.92 – 33-7/32" – 95" 15.54 23.15 26.58

Outswing Entrance Doors - �-wide (stationary/active)

4068 11.64 – 21-7/32" – 79" 13.84 12.65 29.56

5068 14.93 – 27-7/32" – 79" 19.49 15.94 36.46

5468 16.03 – 29-7/32" – 79" 21.38 17.04 38.76

6068 18.22 – 33-7/32" – 79" 25.15 19.24 43.36

4070 12.23 – 21-7/32" – 83" 14.66 13.29 30.98

5070 15.69 – 27-7/32" – 83" 20.64 16.75 38.22

5470 16.84 – 29-7/32" – 83" 22.64 17.90 40.63

6070 19.15 – 33-7/32" – 83" 26.63 20.21 45.46

4080 14.00 – 21-7/32" – 95" 17.10 15.21 35.26

5080 17.96 – 27-7/32" – 95" 24.09 19.17 43.50

5480 19.28 – 29-7/32" – 95" 26.42 20.49 46.25

6080 21.91 – 33-7/32" – 95" 31.08 23.13 51.74

Outswing Entrance Doors - French

4068 11.64 23.21 21-7/32" 42-5/16" 79" 13.84 26.20 29.56

5068 14.93 29.80 27-7/32" 54-5/16" 79" 19.49 32.78 36.46

5468 16.03 31.99 29-7/32" 58-5/16" 79" 21.38 34.97 38.76

6068 18.22 36.38 33-7/32" 66-5/16" 79" 25.15 39.36 43.36

4070 12.23 24.39 21-7/32" 42-5/16" 83" 14.66 27.52 30.98

5070 15.69 31.30 27-7/32" 54-5/16" 83" 20.64 34.44 38.22

5470 16.84 33.61 29-7/32" 58-5/16" 83" 22.64 36.74 40.63

6070 19.15 38.22 33-7/32" 66-5/16" 83" 26.63 41.36 45.46

4080 14.00 27.91 21-7/32" 42-5/16" 95" 17.10 31.50 35.26

5080 17.96 35.83 27-7/32" 54-5/16" 95" 24.09 39.42 43.50

5480 19.28 38.47 29-7/32" 58-5/16" 95" 26.42 42.06 46.25

6080 21.91 43.75 33-7/32" 66-5/16" 95" 31.08 47.34 51.74


Notes For oUtsWiNG eNtraNCe doors:➢ For units with handicap sills, add 1-1/8" to the clear opening heights.➢ One or both sash open to 90º.

Note:➢ For the most up to date data, please visit the Kolbe website at www.kolbe-kolbe.com.


Most of the products and glazing options listed below are NFRC listed. The values are calculated using the NFRC approved WINDOW and THERM computer programs. PDL glazing options generally have the same U-factor as one-lite. SS spacer means stainless steel Thermo-Edge spacer. Kolbe’s standard argon-filled insulating glass has a LoE coating on #2 glass surface. It has the desirable combination of visual clarity, good U value, with one of the lowest Solar Heat Gain Coefficients (SHGC) available in clear insulating glass. This great combined performance is suitable nationwide. Air values are given for when high altitude breather tubes are used. Tubes may be used when units are to be installed in or shipped through high altitude areas. It is your responsibility to know what units are being used. Operating awning unit values are similar to those of operating casements, therefore those values are not listed. Additional values are available upon request.

enerGy perFormanCe Data notes

U/R Total – The U factor and R value of a total unit. A small U factor means less heat escapes during winter weather. Units are Btu/(hr•ft2•ºF) R = 1/U Thus, a large R value means less heat escapes during winter weather. SHGC Total – Solar Heat Gain Coefficient Total is a unitless number representing the ratio of radiant solar energy passing through/ incident solar radiation. A small SHGC is desirable during summer. This includes the effect of frame and dividers, which have SHGC of almost zero. Shading Coefficient = SHGC / 0.86 cog – Center-of-glass is the central glazed portion of a window or door which you can see through, that is more than 2.5" from sightline. Total – Total values include the effects of frames, dividers, edge-of-glass, and cog.Glass Temperature – cog roomside glass surface, assumes winter night 0ºF exterior air, 15mph wind, and 70ºF roomside air. A higher glass temperature means better glass insulating value and condensation is less likely. Roomside edge-of-glass is usually cooler than cog. Relative Humidity – Assumes same winter conditions. 70º roomside at this relative humidity begins to form condensation on cog room side glass surface. Condensation will form more easily on cooler roomside edge-of-glass than on cog. Vt – Visible Transmittance of the total fenestration product system is the transmittance across the visible portion of the solar spectrum where sensitivity to each wavelength is weighted by the eyes response. Vt is expressed as a dimensionless number from 0 (completely opaque) to 1.0 (completely clear). This value is influenced by the glass selection and by the ratio of glazing and frame area. Vtc high number (Ø.65) means nearly clear view, and low Vt total number means tinted view. Vtc cog – Visual transmittance is a unitless number representing the ratio of visible light passing through glass/incident visible light. A high number (>.65) means nearly clear view and a low Vt number means tinted view. Tuv cog – A unitless number representing the ratio of ultraviolet radiation (wavelength 0.30-0.38 micron) passing through glass/ same incident ultraviolet radiation. A low number is generally desirable. Tdw-K cog – A unitless number representing the ratio of weighted ultraviolet and visible radiation (.30-.50 microns) passing through glass/same incident radiation. A low number is generally desirable. For some fabrics and colors this is a more accurate measure of fade potential than Tuv. Tdw-K uses Krochmann formula. Tdw-ISO cog – Similar to Tdw-K, Tdw-ISO uses International Standards Organization formula.

Energy Star – Requires NFRC values below: The following 3 symbols indicate why a product doesn’t have an Energy Star Rating: Northern U ≤ .35 & SHGC = Any North Central U ≤ .40 & SHGC ≤ .55 @ Values don’t qualify South Central U ≤ .40 & SHGC ≤ .40 # Not NFRC listed Southern U ≤ .65 & SHGC ≤ .40 * NFRC listing doesn’t include SHGC yet

Product Line descriptionGlazing Variations

U/r total

sHGC total

Vt total

Ucog

sHGCcog

Vtccog

Glass temp

°F, cog

r.H. %,

cog

tuv cog

tdw-Kcog

tdw-iso cog

Operating Casement

Clad, Onelite, 7/8" HºK air, SS spcr .37/2.70 0.26 0.48 0.30 0.37 0.70 52.9 57.5 0.14 0.31 0.53 NC, SC, S

PDL & Bars-in-Glass < 1" .37/2.70 0.24 0.43 0.30 0.37 0.70 52.9 57.5 0.14 0.31 0.53 NC, SC, S

PDL & Bars-in-Glass ≥ 1" .37/2.70 0.22 0.39 0.30 0.37 0.70 52.9 57.5 0.14 0.31 0.53 NC, SC, S

Clad, Onelite, 7/8" HºK arg, SS spcr .34/2.94 0.26 0.48 0.26 0.37 0.70 55.4 62.9 0.14 0.31 0.53 N, NC, SC, S, A

PDL & Bars-in-Glass < 1" .34/2.94 0.24 0.43 0.26 0.37 0.70 55.4 62.9 0.14 0.31 0.53 N, NC, SC, S, A

PDL & Bars-in-Glass ≥ 1" .34/2.94 0.22 0.39 0.26 0.37 0.70 55.4 62.9 0.14 0.31 0.53 N, NC, SC, S, A

Clad, Onelite, 7/8" LoE 240 arg, SS spcr .34/2.94 0.18 0.27 0.26 0.25 0.40 55.0 60.3 0.16 0.24 0.35 N, NC, SC, S, A

e n e r G y p e r F O r m a n C e d ata

EnErgy Star

N, NC, sC, sEnErgy Star

Canadaa, B, C, d

110 ClassiC series

e n e r G y p e r F O r m a n C e d ata


U/r total

sHGC total

Vt total

Ucog

sHGCcog

Vtccog

Glass temp

°F, cog

r.H. %,

cog

tuv cog

tdw-K

cog

tdw-iso cog

Fixed Casement Sash Set

Clad, Onelite, 7/8" HºK air, SS spcr .35/2.85 0.30 0.56 0.30 0.37 0.70 52.9 57.5 0.14 0.31 0.53 N, NC, SC, S, A



Clad, Onelite, 7/8" HºK arg, SS spcr .31/3.22 0.30 0.56 0.26 0.37 0.70 55.4 62.9 0.14 0.31 0.53N, NC, SC, S,

A, B

PDL & Bars-in-Glass < 1" .31/3.22 0.27 0.50 0.26 0.37 0.70 55.4 62.9 0.14 0.31 0.53N, NC, SC, S,

A, B

PDL & Bars-in-Glass ≥ 1" .31/3.22 0.24 0.44 0.26 0.37 0.70 55.4 62.9 0.14 0.31 0.53N, NC, SC, S,

A, B

Clad, Onelite, 7/8" LoE 240 arg, SS spcr .32/3.12 0.20 0.32 0.26 0.25 0.40 55.0 60.3 0.16 0.24 0.35N, NC, SC, S,

A, B

Traditional Double Hung

Clad, Onelite, 9/16" HºK air, SS spcr .36/2.77 0.27 0.50 0.32 0.37 0.71 52.1 51.5 0.15 0.32 0.53 NC, SC, S



Clad, Onelite, 9/16" HºK arg, SS spcr .32/3.12 0.27 0.50 0.26 0.37 0.71 55.3 58.6 0.15 0.32 0.53 N, NC, SC, S, A



Clad, Onelite, 9/16" HºK arg, SS, Combo .25/4.00 0.27 0.46 0.20 0.37 0.65 58.6 66.6 0.13 0.29 0.48N, NC, SC, S,

A, B, C, D

Traditional Slider

Clad, Onelite, 9/16" HºK air, Al spcr .43/2.32 0.27 0.47 0.32 0.37 0.71 52.1 51.5 0.15 0.32 0.53 S

PDL & Bars-in-Glass < 1" .44/2.32 0.25 0.42 0.32 0.37 0.71 52.1 51.5 0.15 0.32 0.53 S

PDL & Bars-in-Glass ≥ 1" .44/2.27 0.22 0.37 0.32 0.37 0.71 52.1 51.1 0.15 0.32 0.53 S

Clad, Onelite, 9/16" HºK arg, Al spcr .39/2.56 0.27 0.47 0.26 0.37 0.71 55.3 58.6 0.15 0.32 0.53 NC, SC, S



Clad, Onelite, 9/16" HºK arg, SS spcr .36/2.78 0.27 0.47 0.26 0.37 0.71 55.3 58.6 0.15 0.32 0.53 NC, SC, S



Clad, Onelite, 9/16" HºK arg, SS, Combo .27/3.70 0.28 0.42 0.20 0.37 0.65 58.6 66.6 0.13 0.29 0.48 N, NC, SC S

Viewport Sliding Patio Door

Clad, Onelite, 7/8" HºK air, SS spcr .35/2.85 0.28 0.53 0.32 0.37 0.70 52.9 57.5 0.14 0.31 0.52 N, NC, SC, S

PDL & Bars-in-Glass < 1" .35/2.85 0.25 0.46 0.32 0.37 0.70 52.9 57.5 0.14 0.31 0.52 N, NC, SC, S

PDL & Bars-in-Glass ≥ 1" .35/2.85 0.22 0.40 0.32 0.37 0.70 52.9 57.5 0.14 0.31 0.52 N, NC, SC, S

Clad, Onelite, 7/8" HºK arg, SS spcr .31/3.22 0.28 0.53 0.26 0.37 0.70 55.4 62.9 0.14 0.31 0.52 N, NC, SC, S



Garden-Aire Sliding Patio Door




EnErgy Star


Canadaa, B, C, d


e n e r G y p e r F O r m a n C e d atae n e r G y p e r F O r m a n C e d ata


U/r total

sHGC total

Vt total

Ucog

sHGCcog

Vtccog

Glass temp

°F, cog

r.H. %,

cog

tuv cog

tdw-Kcog

tdw-iso cog

Garden-Aire Sliding Patio Door (continued)




Inswing Patio Door & Inswing Entrance Door







Clad, Onelite, 7/8" LoE 240 arg, SS spcr .32/3.12 0.15 0.24 0.26 0.25 0.40 55.0 60.3 0.16 0.24 0.35 N, NC, SC, S

Outswing Entrance Door




Note:Air, water and structural data is updated monthly and is available after registration & sign-in at www.kolbe-kolbe.com.For Canadian EnErgy Star ratings, visit the Kolbe website at www.kolbe-kolbe.com and click on Energy & Performance.

EnErgy Star


Canadaa, B, C, d

1323 S. 11th Avenue Wausau, WI 54401-5998715.842.5666

www.kolbe -kolbe.com

© 2008 Kolbe & Kolbe Millwork Co., Inc.Kolbe & Kolbe Millwork Co., Inc. reserves the right to change specifications without notice.

Photography used may not represent current Kolbe product features and options.5131560-15M-0408-RP

k o l b eC - Hass Wholesalehasswholesale.com/PDF_6_12/K-K_brochure_Classic.pdf Glass options DiviDeD...

Documents

Transcript of k o l b eC - Hass Wholesalehasswholesale.com/PDF_6_12/K-K_brochure_Classic.pdf Glass options DiviDeD...