just-insulation.com · Web view2. 2. 3. 3. 6. 6. 7. 7. Visit to download the full product...

Insulation CI/Sfb (2–) Rn7 M2

Fourth Issue June 2011

Product SelectorINSULATION FOR ROOFS, WALLS & FLOORS

Low Energy – Low Carbon Buildings

2

Kingspan Insulation Ltd reserves the right to amend product specifications without prior notice. The information contained in the document is given in good faith and applies to the uses described. Recommendations for use should be verified as to the suitability and compliance with actual requirements, specifications and any applicable laws and regulations. Kingspan Insulation recommend using the Technical Advice service (see back cover).

3

ContentsPage

Product Selector Chart 4

U–value Time Saver 6

Building Regulations and Standards 7

Roof Insulation 9Kooltherm® K7 Pitched Roof Board 10Thermapitch® TP10 11Thermaroof® TR21 12Thermaroof® TR25 13Thermaroof® TR26 LPC/FM 14Thermaroof® TR27 LPC/FM 15Thermaroof® TR31 16Thermataper® TT46 LPC/FM 17Thermataper® TT47 LPC/FM 18Kooltherm® K11 Roofboard 19Styrozone® N 300 R 20Styrozone® H 350 R 21Styrozone® N 500 R 22Styrozone® N 700 R 23

Wall Insulation 25Kooltherm® K5 External Wall Board 26Kooltherm® K8 Cavity Board 27Kooltherm® K12 Framing Board 28Kooltherm® K15 Rainscreen Board 29Kooltherm® K17 Insulated Plasterboard 30Kooltherm® K18 Insulated Plasterboard 31Thermawall® TW50 32Thermawall® TW55 33Styrozone® N 300 R 20Styrozone® H 350 R 21

Floor Insulation 35Kooltherm® K3 Floorboard 36Kooltherm® K10 FM Soffit Board 37Thermafloor® TF70 38Thermafloor® TF73 39Styrozone® N 300 R 20Styrozone® H 350 R 21Styrozone® N 500 R 22Styrozone® N 700 R 23

Cavity Closers 41Kooltherm® Cavity Closer and Kooltherm® Cavity Closer PLUS 42Thermabate® & Thermabate® PLUS 44

Breathable Membranes 46nilvent® 47

Roof Wall

Floor Cavity

Breathable

4

Product Selector

Roof Insulation

Kool

ther

m®

K7

Pitc

hed

Roof

Boa

rd

Ther

map

itch®

TP1

0Th

erm

aroo

f® T

R21

Ther

mar

oof®

TR2

5Th

erm

aroo

f® T

R26

LPC/

FM

Ther

mar

oof®

TR2

7 LP

C/FM

Ther

mar

oof®

TR3

1Th

erm

atap

er®

TT4

6 LP

C/FM

Ther

mat

aper

® T

T47

LPC/

FMKo

olth

erm

® K

11 R

oof B

oard

Styr

ozon

e® N

300

R

Styr

ozon

e® H

350

RSt

yroz

one®

N 5

00 R

Styr

ozon

e® N

700

Rni

lven

t®

Pitched Roof InsulationOver / between / under rafter sarking ✔ ✔

Breathable membrane ✔Flat Roof InsulationTapered Roofing System ✔ ✔Under partially bonded built–up felt ✔ ✔ ✔ ✔

Under cold liquid applied waterproofing ✔ ✔ ✔

Under mastic asphalt ✔ ✔Directly over timber joists ✔Under torch–on felt waterproofing

✔

Under mechanically–fixed, single–ply non–bituminous membranes

✔ ✔ ✔ ✔

Under fully adhered singly–ply membranes

✔ ✔

In LPCB/FM approved constructions

✔ ✔ ✔ ✔

Protected Membrane RoofsTraditionally protected membrane / Roof gardens

✔ ✔

Car park decks ✔ ✔ ✔ ✔Lightweight protected membrane/ maintenance access ✔ ✔

Green RoofsInsulation suitable for use under Green Roofs ✔ ✔ ✔ ✔ ✔ ✔

Product Selector

Floor

5

H eavy duty / industrial / cold store floors

Soffit liningFloating ground floorsSuspended ground floorsSolid ground floors

✔ ✔ Kooltherm® K3 Floorboard✔ Kooltherm® K10 FM Soffit Board

✔ ✔ ✔ Thermafloor® TF70

✔ Thermafloor® TF73

✔ Styrozone® N 300 R

✔ Styrozone® H 350 R



B reathable mem

brane

Cavity ClosersBasem

ent wallsSteel fram

eTim

ber frame

Rainscreen cladding systems

Insulated render systems

Internal dry–liningPartial fill cavity walls

✔ Kooltherm® K5 External wall Board✔ Kooltherm® K8 Cavity Board

✔ ✔ Kooltherm® K12 Framing Board✔ Kooltherm® K15 Rainscreen Board

✔ Kooltherm® K17 Insulated Plasterboard

✔ Kooltherm® K18 Insulated Plasterboard

✔ Thermawall® TW50✔ ✔ Thermawall® TW55

✔ Styrozone® N 300 R✔ Styrozone® H 350 R

✔ nilvent®

✔ Kooltherm® Cavity Closer & Kooltherm® Cavity Closer PLUS

✔ Thermabate® & Thermabate® PLUS

6

U–value Time SaverHelp us to help you when requesting U–values from Kingspan Insulation’s Technical Advice Service. Please provide the following information for all building elements:• What U–value is required?• Project address and postcode• Type of building eg. Offices.

Flat Roof• What is the type of waterproofing being used?• What is the roof substrate – timber, concrete or profiled metal deck?• Is there a ceiling – if yes then is it plasterboard or suspended tile?• If using Kingspan Thermaroof® TR31 what are the joist size centres?• If mechanical fixings are being used – what are they (carbon steel,

galvanised steel, stainless steel or telescopic fixings)?

Pitched Roof• What are the size and centres of the rafters or ceiling joists?• Is the insulation at ceiling or rafter level?• If at rafter level, is there a 50 mm ventilated airspace between the rafters above the

insulation?• If no 50 mm ventilated airspace, is there a breathable membrane above the rafters?• If a breathable membrane is being used is it above or below the counter batten or draped into

the rafter void?

Wall Construction• What is the wall construction – cavity, solid wall, rendered?• If cavity wall construction, what is the manufacturer and type of block being

used for inner (and outer if applicable) leaf or its thermal conductivity (may also be known as λ–value?)

• What is the internal wall finish?• Is the wall above ground or basement wall?

Ground Floor• What is the perimeter / area ratio? (This is the length of the externally exposed floor slab

perimeter measured on the inside wall, not including internal or separating walls, divided by the floor area.)

• Is the floor a solid ground bearing slab, suspended beam & block or suspended timber or concrete floor (if suspended timber the joist size and centres are required.)

Floor Other Than Ground• Is soffit insulation required?• If the insulation is to be fitted between joists what are the joist size and centres?

Technical Advice

Telephone: 01544 387 382 Fax: 01544 387 482 Email:

7

Building Regulations and Standards

England and WalesNew Buildings (ADL 1A & ADL 2A)The main requirement of Approved Documents L1A and L2A is that buildings meet a defined CO2 emissions target. The roof, wall and floor U–values required to meet this target will depend on the design of the building, orientation, heating system etc. To ease the process, Kingspan Insulation has undertaken analysis to give the ‘best starting point’ U–values, for specifiers to work from in getting their designs to comply. They will be almost exactly what is required for some buildings and short of what is required for others.These ‘best starting point’ U–values are shown below.Existing Buildings (ADL 1B & ADL 2B)Approved Documents L1B and L2B give specific U–value requirements for newly constructed elements and retained / refurbished elements. They apply to all works, regardless of whether the works relate to an extension, conversion or renovation.These required U–values are shown below.

New Buildings Existing BuildingsBest Starting Point Extension, Conversion and

Renovation Of All BuildingsDwellings Buildings Other

Than DwellingsNew Elements Refurbishment /

Retained ElementsLofts 0.13 0.14 0.16 0.16

All other roofs 0.13 0.14 0.18 0.18Walls 0.18 0.22 0.28 0.30Floors 0.13 0.18 0.22 0.25

ScotlandNew Buildings (Section 6 – Energy)The main requirement of Technical Handbooks Sections 6 is that buildings meet a defined CO2 emissions target. For domestic, this target is generated by a set of 2010 notional buildings, which also offer a simplified elemental approach to compliance. If a building is constructed in accordance with the parameter values that define the notional building, then it will automatically comply with the CO2 emissions target. The ‘notional’ U–values for roofs, walls and floors are shown opposite. For non–domestic, the approach is the same as that described overleaf for ADL2A and ‘best starting point’ U–values are shown below.Existing Buildings (Section 6 – Energy)Technical Handbooks Sections 6 give specific area–weighted average U–value requirements for newly constructed elements and altered/ refurbished elements. They apply to most works*, regardless of whether the works relate to an extension, renovation, or conversione.g. of a whole unheated building, loft or garage. For existing dwellings, there are differing requirements for newly constructed elements, depending upon the thermal efficiency of the existing building*. The required U–values are shown below.

New Buildings Existing BuildingsDomestic Non–

DomesticExtension, Conversion &

Renovation – Most Works*Notional Building

Best Starting Point

Domestic New

Elements A*

Domestic New

Elements B*

Domestic Altered /

Refurbished Elements

Non– Domestic

Lofts 0.13 0.13 0.13 0.15 0.15 0.15All other roofs 0.13 0.13 0.15 0.18 0.18 0.15Walls 0.19 0.22 0.19 0.22 0.22 0.25Floors 0.15 0.18 0.15 0.18 0.18 0.20

* There are specific exceptions relating to, e.g. conversion of heated buildings and infilling of openings. Please consult the Technical Handbooks. Column B applies where the existing building has, or will be improved to have, wall U–values better than 0.7 W/m2.K and roof U–values better than 0.25 W/m2.K. If the U–values are worse, then column A applies.

.

_.,

I

. . /. . . ...,....,/ . .

.. ..I';/' . . . .

. . . .,,

..,rl>.,tP< . . . . .

,· . . . .

•

Roof Insulation

Roof

Visit www.kingspaninsulation.co.uk to download the full product brochure, order samples and learn about case studies

1

K7 Pitched Roof BoardINSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACESRecommended for:✔ New build✔ Re–roofing✔ Loft conversion✔ Unventilated pitched roofs – between rafters✔ Unventilated pitched roofs –

between and over rafters✔ Ventilated pitched roofs –

between rafters

Kingspan nilvent ®

Kingspan Kooltherm® K7 Pitched Roof Board

Kingspan Kooltherm® K18 Insulated Plasterboard

Product DataThermal Conductivity 0.023 W/m.K (insulant thickness < 25 mm)

0.021 W/m.K (insulant thickness 25 – 44 mm)0.020 W/m.K (insulant thickness ≥ 45 mm)

Facings Composite foilCore Premium performance rigid thermoset modified resin insulant

manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)Board Size 1.2 x 2.4 m

Thicknesses Available 25 – 140 mmComplementary Products • nilvent® (page 47)

• Kooltherm® K18 Insulated Plasterboard (page 31)

Roof

1

TP10INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACESRecommended for:✔ New build✔ Re–roofing✔ Loft conversion✔ Unventilated pitched roofs – between rafters✔ Unventilated pitched roofs –

between and over rafters✔ Ventilated pitched roofs –

between rafters

Kingspan nilvent ®

Kingspan Thermapitch® TP10


Product DataThermal Conductivity 0.022 W/m.KFacings Composite foilCore High performance rigid thermoset polyisocyanurate (PIR) insulant

manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)

Board Size 1.2 x 2.4 mThicknesses Available 20 – 150 mmComplementary Products • nilvent® (page 47)


Visit www.kingspaninsulation.co.uk to download the full product brochure,

order samples and learn about case studies

Roof


1

TR21INSULATION FOR FLAT ROOFS WATERPROOFED WITH PARTIALLY BONDED BUILT–UP FELT AND MASTIC ASPHALTRecommended for:✔ New build✔ Refurbishment✔ Metal, concrete or timber decks

Kingspan Thermaroof® TR21

Kingspan Kooltherm® K8 Cavity Board



Facings Glass reinforced perforated celluloseCore High performance rigid thermoset polyisocyanurate (PIR) insulant


Board Size 1.2 x 0.6 mThicknesses Available 30 – 120 mmComplementary Products

Roof

1

TR25INSULATION FOR FLAT ROOFS WATERPROOFED WITH COLD LIQUID APPLIED WATERPROOFINGRecommended for:✔ Fast–track building programmes✔ New build✔ Refurbishment✔ Metal, concrete or timber decks




0.025 W/m.K (insulant thickness 80 – 119 mm)0.024 W/m.K (insulant thickness ≥ 120mm)

Facings Coated glass tissueCore High performance rigid thermoset polyisocyanurate (PIR) insulant





Roof


1

TR26 LPC/FMINSULATION FOR FLAT ROOFS WATERPROOFED WITH MECHANICALLY FIXED SINGLE–PLY WATERPROOFINGRecommended for:✔ LPCB / FM compliance✔ Fast–track building programmes✔ New build✔ Refurbishment✔ Metal, concrete or timber decks

LPS 1181: Part 1Certificate No.

388b/01Class 1 Roof Construction





Board Size 1.2 x 2.4 mThicknesses Available 25 – 150 mmComplementary Products • Thermataper® TT46 LPC/FM (page 17)

Roof

mes

ecks

1

TR27 LPC/FMINSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLY ADHERED SINGLE–PLY, PARTIALLY BONDED BUILT–UP FELT, MASTIC ASPHALT AND COLD LIQUID APPLIED WATERPROOFINGRecommended for:✔ LPCB / FM compliance✔ Fast–track building program✔ New build✔ Refurbishment✔ Metal, concrete or timber d






0.025 W/m.K (insulant thickness 80 – 119 mm)0.024 W/m.K (insulant thickness ≥ 120mm)



Board Size 1.2 x 0.6 m and 1.2 x 2.4 mThicknesses Available 25 – 130 mm (1.2 x 0.6 m boards) and 50 – 145 mm (1.2 x 2.4 m

boards)Complementary Products • Thermataper® TT47 LPC/FM (page 18)



Roof


1

TR31STRUCTURAL INSULATION / FSC CERTIFIED PLYWOOD COMPOSITE FOR FLAT ROOFS WATERPROOFED WITH PARTIALLY BONDED BUILT–UP FELTRecommended for:✔ New build✔ Refurbishment✔ Directly over timber decks



Kingspan Kooltherm® K7 Pitched Roof Board

Product DataThermal Conductivity 0.022 W/m.K (insulant)

0.140 W/m.K (plywood)Upper Facing FSC certified 6 mm WBP exterior grade plywoodCore High performance rigid thermoset polyisocyanurate (PIR) insulant


Lower Facing Composite foilBoard Size 1.2 x 2.4 mThicknesses Available 50 – 120 mm (Insulation thickness only)Complementary Products

Roof

1

TT46 LPC/FMTAPERED INSULATION FOR FLAT ROOFS WATERPROOFED WITH MECHANICALLY FIXED SINGLE–PLY WATERPROOFINGRecommended for:✔ Alternative to expensive screed–to falls roofs✔ Reducing load–bearing

implications for new or existing structures

✔ Fast–track building programmes✔ New build✔ Refurbishment✔ Metal, concrete or timber decks



Kingspan Thermataper® TT46 LPC/FM




Board Size 1.2 x 2.4 mManufactured Rate of Fall

1:30; 1:40; 1:60; 1:80Complementary Products • Thermaroof® TR26 LPC/FM (page 14)


Roof


1


1

TT47 LPC/FMTAPERED INSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLY ADHERED SINGLE–PLY, PARTIALLY BONDED BUILT–UP FELT, MASTIC ASPHALT AND COLD LIQUID APPLIED WATERPROOFINGRecommended for:✔ Alternative to expensive screed–to falls roofs✔ Reducing load–bearing

implications for new or existing structures

✔ Fast–track building programmes✔ New build✔ Refurbishment✔ Metal, concrete or timber decks



Kingspan Thermataper® TT47 LPC/FM






Board Size 1.2 x 0.6 m and 1.2 x 2.4 mManufactured Rate of Fall

1:30; 1:40; 1:60; 1:80Complementary Products • Thermaroof® TR27 LPC/FM (page 15)

Roof


2

K11 RoofboardINSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLY BONDED TORCH APPLIED MULTI–LAYER BITUMINOUS WATERPROOFINGRecommended for:✔ New build✔ Refurbishment✔ Metal, concrete or timber decks

Kingspan Kooltherm® K11 Roof Board


Product DataThermal Conductivity 0.023 W/m.K (insulant thickness 25 – 44 mm)

0.021 W/m.K (insulant thickness ≥ 45 mm)0.050 W/m.K (perlite)

Upper Facing 20 mm bitumen coated perliteCore Premium performance rigid thermoset modified resin insulant

manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)Lower Facing Glass tissue

Board Size 1.2 x 1.0 mThicknesses Available 40 and 70 mm (Insulation thickness only)Complementary Products



Roof


2

N 300 RINSULATION FOR INVERTED ROOFS, BASEMENTS, CAR PARK DECKS, AND HEAVY DUTY COMMERCIAL, INDUSTRIAL AND COLD STORE FLOORINGRecommended for:✔ New build✔ Refurbishment✔ Inverted / protected

membrane roofs✔ Basement walls✔ Below floor slab or screed


Kingspan Styrozone® N 300 R


1.37 W/m.K (insulant thickness 80 mm)1.38 W/m.K (insulant thickness 100 − 160 mm)0.040 W/m.K (insulant thickness > 160 mm)

Core High performance rigid extruded polystyrene insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)Board Size 1.25 x 0.6 m

Thicknesses Available 30 – 180 mmComplementary Products • Styrozone® H 350 R (page 21)

Roof

2

H 350 RINSULATION FOR INVERTED ROOFS, BASEMENTS, CAR PARK DECKS, AND HEAVY DUTY COMMERCIAL, INDUSTRIAL AND COLD STORE FLOORINGRecommended for:✔ New build✔ Refurbishment✔ Inverted / protected membrane roofs✔ Basement walls✔ Below floor slab or screed

Kingspan Styrozone® H 350 R


Product DataThermal Conductivity 0.029 W/m.K (insulant thickness ≤ 120 mm)

0.031 W/m.K (insulant thickness > 120 mm)Core High performance rigid extruded polystyrene insulant manufactured with a

blowing agent that has zero Ozone Depletion Potential (ODP)Board Size 1.25 x 0.6 mThicknesses Available 30 – 160 mmComplementary Products • Styrozone® N 300 R (page 20)



Roof


2

N 500 RINSULATION FOR CAR PARK DECKS, AND HEAVY DUTY COMMERCIAL, INDUSTRIAL AND COLD STORE FLOORINGRecommended for:✔ New build✔ Refurbishment✔ Inverted / protected membrane roofs✔ Below floor slab or screed


Product DataThermal Conductivity 0.036 W/m.K (insulant thickness ≤ 70 mm)

0.038 W/m.K (insulant thickness > 70 mm)Core High performance rigid extruded polystyrene insulant manufactured with a

blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)Board Size 1.25 x 0.6 m

Thicknesses Available 30 – 120 mmComplementary Products • Styrozone® N 300 R (page 20)

• Styrozone® H 350 R (page 21)• Styrozone® N 700 R (page 23)

Roof

2

N 700 RINSULATION FOR CAR PARK DECKS, AND HEAVY DUTY COMMERCIAL, INDUSTRIAL AND COLD STORE FLOORINGRecommended for:✔ New build✔ Refurbishment✔ Inverted / protected membrane roofs✔ Below floor slab or screed


Product DataThermal Conductivity 0.036 W/m.K (insulation thickness ≤ 50 mm)Core High performance rigid extruded polystyrene insulant manufactured with a

blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)Board Size 1.25 x 0.6 m

Thicknesses Available 50 mmComplementary Products • Styrozone® N 500 R (page 22)



Roof

Kingspan Kooltherm® K8 Cavity Board24

Wall Insulation

Wall

2

K5 External Wall BoardEXTERNAL INSULATION FOR MASONRY WALLSRecommended for:✔ Solid walled buildings✔ Transforming and

upgrading the appearance of

existing buildings

✔ New build✔ Refurbishment✔ Insulated render

system on masonry

Kingspan Kooltherm® K5 External Wall Board



Facings Glass tissueCore Premium performance rigid thermoset modified resin insulant


Thicknesses Available 20 – 100 mmComplementary Products


Wall


2

K8 Cavity BoardPARTIAL FILL CAVITY WALL INSULATIONRecommended for:✔ Traditional cavity wall construction methods✔ New build✔ All brick and block types


Kingspan Kooltherm® K3 Floorboard





Thicknesses Available 20 – 120 mmComplementary Products • Kooltherm® Cavity Closer and Kooltherm® Cavity Closer PLUS (page

42)• Thermabate® and Thermabate® PLUS Cavity Closer (page 44)

Wall

2

K12 Framing BoardINSULATION FOR TIMBER AND STEEL FRAMING SYSTEMSRecommended for:✔ Insulating between studs✔ Insulating sheathing✔ Steel frame walls✔ Timber clad / tile

hung timber frame walls

Kingspan Kooltherm® K12 Framing Board

Kingspan nilvent®






Thicknesses Available 25 – 140 mmComplementary Products • nilvent® (page 47)



Wall


2

K15 Rainscreen BoardINSULATION FOR RAINSCREEN CLADDING SYSTEMSRecommended for:✔ Proprietary and non–

proprietary external finishes

✔ Insulated rainscreen cladding systems on both masonry and steel frames

✔ New build✔ Refurbishment

Kingspan Kooltherm® K15 Rainscreen Board






Kingspan Kooltherm® K15 Rainscreen Board is also available with a black foil face.

Wall

3

K17 Insulated PlasterboardINSULATED PLASTERBOARD FOR PLASTER DAB / ADHESIVE BONDED DRY–LININGRecommended for:✔ Traditional cavity walls✔ Solid rendered walls✔ Insulation and dry–lining

applications✔ New build✔ Refurbishment




0.021 W/m.K (insulant thickness 25 – 44 mm)0.020 W/m.K (insulant thickness ≥ 45 mm)0.190 W/m.K (plasterboard)

Front Facing 12.5 mm plasterboardCore Premium performance rigid thermoset modified resin insulant

manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)Reverse Facing Glass tissue

Board Size 1.2 x 2.4 mThicknesses Available 20 – 100 mm (Insulation thickness only)Complementary Products • Kooltherm® Cavity Closer and Kooltherm® Cavity Closer PLUS (page

42)• Thermabate® and Thermabate® PLUS Cavity Closer (page 44)• Kooltherm® K18 Insulated Plasterboard (page 31)


Wall


3

K18 Insulated PlasterboardINSULATED PLASTERBOARD FOR MECHANICALLY FIXED DRY–LININGRecommended for:✔ Solid walls✔ Timber frame walls✔ Timber rafters✔ Metal furring systems✔ Insulation, dry–lining and

vapour control applications

✔ New build✔ Refurbishment✔ Loft conversions



0.021 W/m.K (insulant thickness 25 – 44 mm)0.020 W/m.K (insulant thickness ≥ 45 mm)0.190 W/m.K (plasterboard)

Front Facing 12.5 mm plasterboardCore Premium performance rigid thermoset modified resin insulant

manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)Reverse Facing Composite foil

Board Size 1.2 x 2.4 mThicknesses Available 20 – 100 mm (Insulation thickness only)Complementary Products • Kooltherm® K12 Framing Board (page 28)

• Kooltherm® K7 Pitched Roofing Board (page 10)• Kooltherm® Cavity Closer and Kooltherm® Cavity Closer PLUS (page

42)• Thermabate® and Thermabate® PLUS Cavity Closer (page 44)• Kooltherm® K17 Insulated Plasterboard (page 30)

Wall

3

TW50PARTIAL FILL CAVITY WALL INSULATIONRecommended for:✔ Traditional cavity wall construction methods✔ New build✔ All brick and block types

Kingspan Thermawall® TW50

Product DataThermal Conductivity 0.022 W/m.KFacings Composite FoilCore High performance rigid thermoset polyisocyanurate (PIR) insulant


Board Size 1.2 x 0.45 mThicknesses Available 20 – 100 mmComplementary Products • Thermabate® and Thermabate® PLUS Cavity Closer (page 44)

• Kooltherm® Cavity Closer and Kooltherm® Cavity Closer PLUS (page 42)

• Kooltherm® K8 Cavity Board (page 27)


Wall


3

TW55INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMSRecommended for:✔ Insulating between studs✔ Insulating sheathing✔ Steel frame walls✔ Timber clad / tile

hung timber frame walls

Kingspan Thermawall® TW55

Kingspan nilvent ®




Board Size 1.2 x 2.4 mThicknesses Available 20 – 150 mmComplementary Products • Kooltherm® K18 Insulated Plasterboard (page 31)

• nilvent® (page 47)• Kooltherm® K12 Framing Board (page 28)

Wall

Kingspan Kooltherm® K3 Floorboard34

Floor Insulation

Floor


3

K3 FloorboardINSULATION FOR FLOORSRecommended for:✔ Below the floor slab / screed✔ Beam and block floors✔ Suspended timber floors✔ Underfloor heating applications✔ Floor perimeter insulation✔ New build✔ Refurbishment


Kingspan Kooltherm® K3 Floorboard



Facings Glass tissueCore Premium performance rigid thermoset modified resin insulant



Floor


3

K10 FM Soffit BoardINSULATION FOR STRUCTURAL CEILINGS (SOFFITS)Recommended for:✔ Insulating under structural ceilings✔ Car park ceilings

Kingspan Kooltherm® K10 Soffit Board



Upper Facing Glass tissueCore Premium performance rigid thermoset modified resin insulant

manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP)Exposed Facing Composite foil


Floor


3

TF70INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORSRecommended for:✔ Below the floor slab / screed✔ Beam and block floors✔ Domestic floating floors✔ Suspended timber floors✔ Underfloor heating applications✔ Floor perimeter insulation✔ New build✔ Refurbishment


Kingspan Thermafloor® TF70




Floor


3

TF73INSULATION FOR FLOATING AND SUSPENDED GROUND FLOORSRecommended for:✔ Solid floating ground floors✔ Beam and block floors✔ Suspended timber floors✔ Areas where high

compressive strength required

✔ New build✔ Refurbishment


Kingspan Thermafloor® TF73

Product DataThermal Conductivity 1.29 W/m.K (insulant thickness 20 – 70 mm)

1.30 W/m.K (insulant thickness 70 – 120 mm)0.150 W/m.K (chipboard)

Upper Facing FSC certified 18 mm T&G chipboardCore High performance rigid extruded polystyrene insulant manufactured

with a blowing agent that has zero Ozone Depletion Potential (ODP)Board Size 2.4 x 0.6 mThicknesses Available 25 – 80 mm (Insulation thickness only)Complementary Products

Floor

Kingspan Kooltherm® K18 Insulated Plasterboard40

Cavity Closers

Cavity

4

Cavity CloserFOR CLOSING CAVITIES AROUND OPENINGS IN MASONRY WALLSRecommended for:✔ Traditional cavity wall construction✔ Window and door cavities✔ Use with PVCu and

wooden frames✔ Simplified construction✔ Cavity widths up to 305 mm✔ Using as a frame

former (Kooltherm®

Cavity Closer PLUS only)

Kingspan Kooltherm® Cavity Closer


Product DataThermal Conductivity 0.022 W/m.KSheathing PVC–U extrusionCore Premium performance rigid thermoset modified resin insulant


Length 2.4 mWidths Available 50 – 150 mm (or combinations up to 305 mm)Complementary Products • Kooltherm® K8 Cavity Board (page 27)

• Thermawall® TW50 (page 32)• Kooltherm® K17 Insulated Plasterboard (page 30)• Kooltherm® K18 Insulated Plasterboard (page 31)


Cavity

4

Kingspan Kooltherm® Cavity Closer 50

For cavities 50 – 74 mm wideKingspan Kooltherm® Cavity

Closer 75For cavities 75 – 99 mm wide


For cavities 100 – 109 mm wide

128

128128

31.5

31.531.5

48 6

50 48

6

75

48 6

100







170

170170

31.5

31.531.5

48 6

110 125 48

6 150 48

6

Cavity CloserPRE–FORMED TO SPECIFIED OPENING SIZES FOR CLOSING CAVITIES IN PLASTIC, TIMBER, OR METAL WINDOW FRAMES AND AN INSULATED LINTEL

Cavity

4



4

FOR CLOSING CAVITIES AROUND OPENINGS IN MASONRY WALLSRecommended for:✔ Traditional cavity wall construction✔ Window and door cavities✔ Use with PVCu and

wooden frames✔ Simplified construction✔ Cavity widths up to 200 mm✔ Using as a frame

former (Thermabate PLUS only)

Kingspan Thermabate®


Product DataThermal Conductivity 0.034 W/m.KSheathing PVC–U extrusionCore High performance rigid thermoset urethane insulantLength 3.0 mWidths Available 50 – 100 mm*Complementary Products • Kooltherm® K8 Cavity Board (page 27)

• Thermawall® TW50 (page 32)• Kooltherm® K17 Insulated Plasterboard (page 30)• Kooltherm® K18 Insulated Plasterboard (page 31)

*Sections can be joined together to suit cavity widths up to 200 mm.


Cavity

4

Thermabate®

50(Brown)

Thermabate®

65(Black)

Thermabate®

75(White)

Thermabate®

85(Yellow)

Thermabate®

90(Orange)

Thermabate®

100(Green)

PRE–FORMED TO SPECIFIED OPENING SIZES FOR CLOSING CAVITIES IN PLASTIC, TIMBER, OR METAL WINDOW FRAMES AND AN INSULATED LINTEL

Cavity

4



Breathable Membranes

Breathable

4

BREATHABLE MEMBRANE FOR UNVENTILATED PITCHED ROOFS AND TIMBER FRAME WALLSRecommended for:✔ All types of pitched roofing✔ Timber framing✔ Under battens or

directly on sarking boards

✔ New build✔ Re–roofing

Kingspan nilvent ®

Product DataWater Vapour Resistance 0.17 MN.s/gLiquid Water Penetration > 2 mTensile Strength 233 N longitudinal

162 N transverseRoll Length 50 mRoll Width 1.5 mThickness 0.5 mmArea Per Roll 75 m2

Complementary Products • Kooltherm® K7 Pitched Roof Board (page 10)• Kooltherm® K12 Framing Board (page 28)• Thermapitch® TP10 (page 11)• Thermawall® TW55 (page 33)



Breathable

General EnquiriesTel: +44 (0) 1544 388 601Fax: +44 (0) 1544 388 888

email: [email protected]

Technical AdviceTel: +44 (0) 1544 387 382Fax: +44 (0) 1544 387 482


Tapered RoofingTel: +44 (0) 1544 387 383Fax: +44 (0) 1544 387 483


Literature and SamplesTel: +44 (0) 1544 387 384Fax: +44 (0) 1544 387 484

email: [email protected] Downloads:

www.kingspaninsulation.co.uk/literature

Customer ServiceTel: +44 (0) 1544 388 601Fax: +44 (0) 1544 388 888


Kingspan Insulation LtdPembridge, Leominster, Herefordshire HR6 9LA, UK

www.kingspaninsulation.co.uk

® Kingspan, Kooltherm, nilvent, Styrozone, Thermafloor, Thermaroof, Thermawall, Thermapitch, Thermataper,the zo Device and the Lion Device are Registered Trademarks of the Kingspan Group plc in the UK Ireland and other countries. All rights reserved. Kingspan Insulation Ltd. Registered in England & Wales, No. 01882722. Registered Office:

Pembridge, Leominster, Herefordshire HR6 9LA UK.

just-insulation.com · Web view2. 2. 3. 3. 6. 6. 7. 7. Visit to download the full product...

Documents

Transcript of just-insulation.com · Web view2. 2. 3. 3. 6. 6. 7. 7. Visit to download the full product...