JUST PREPARED NEW PROJECTS FOR YOU...Hi-Tech Projects,Mar’16, # 03 Patrons, deposit amount in EIRI...

Hi-Tech Projects,Mar’16, www.eiriindia.org # 03

Patrons, deposit amount in EIRI AccountICICI BANK LTD. CA-038705000994

(RTGS/NEFT/IFSC Code: ICIC0000387)

JUST PREPARED NEW PROJECTS FOR YOUGRANITE CUTTING CUM

POLISHING UNIT[CODE NO. 1810]

Granite Slab and Tiles are used in building forthe purpose of wall paneling and for thedecoration of walls. So we focus as thedevelopment of building as well as industrialor residential. Moving across the shouldpurposes of a glorious past enriched withtradition and skill, India has emerged as nationdevoted to industrial development on soundmodern lines. India's industrial progresspresent a wide spread pattern dotted all overby scores of modern industries covering wideareas of industrial activities and pulsating withmodern know how and research the widespread popularity of granite tile usually moreevident in major public monumental buildingof traditional or conservative design.

COST ESTIMATIONPlant Capacity 500.00 SQ.MT./dayLand & Building (2 Acres) Rs 5.50 CrPlant & Machinery Rs 16.00 CrW.C. for 3 Months Rs. 5.19 CrTotal Capital Investment Rs 27.00 CrRate of Return 29%Break Even Point 62%*******************************************************

BLENDING AND BOTTLINGPLANT OF COUNTRY LIQUOR

FROM GRAIN BASED ENA(FULLY AUTOMATIC)

[CODE NO 1811]The global alcoholic drinks industry is expectedto exceed $1 trillion in 2014 and is expected towitness moderate growth and reach anestimated $1,369.5 billion by 2018. Increasingdemand of alcoholic beverages in emergingcountries because of their huge populationbase and growing consumption of alcohol bythe young generation as well as r isingdisposable income supports the industrygrowth. Alcoholic beverage includes threesegments such as wine, beer, and spirit. Fromthe analysis presented, alcoholic beverage rawmaterial suppliers as well as alcoholic beverageproducers will recognize that valuableopportunities exist in the global alcoholicbeverage industry, due to impressive trends indemand quantity and growth, based on thevarious markets.. Market volume is predictedto reach almost 210 billion liters in 2014, a 10%increase in five years. Beer, cider and flavoredalcoholic beverages represent the leadingmarket segment with over half of the overallmarket value. The EU represents almost 57%of the world alcoholic drinks market. Theindustry is characterized by fragmentation withthe three leading companies holding almost40% of overall market volume. The market islead by Anheuser-Busch InBev, which has over20% of the overall market volume.

COST ESTIMATIONPlant Capacity 1666 Cases/DayLand & Building (3 Acres) Rs 9.00 CrPlant & Machinery Rs 10.52 CrW.C. for 2 Months Rs. 6.20 CrTotal Capital Investment Rs 27.60 Cr

Rate of Return 73%Break Even Point 27%******************************************************

TENDER COCONUT WATER[CODE NO.1812]

Coconut water is the clear liquid inside younggreen coconuts (fruits of the coconut palm). Inearly development, it serves as a suspensionfor the endosperm of the coconut during thenuclear phase of development. As growthcontinues, the endosperm matures into itscellular phase and deposits into the rind of thecoconut meat. Coconuts for drinking are servedfresh, chilled or packaged in many places. Theyare often sold by street vendors who cut themopen with machetes or similar implements infront of customers. Processed coconut waterfor retail can be found in ordinary cans, tetrapaks, or plastic bottles, sometimes with coconutpulp or coconut jelly included.

COST ESTIMATIONPlant Capacity 4,00,000 TETRAPAK/dayLand & Building (8 Acres) Rs 7.95 CrPlant & Machinery Rs 3.63 CrW.C. for 1 Month Rs. 41.72 CrTotal Capital Investment Rs 54.37 CrRate of Return 56%Break Even Point 23%******************************************************

HERBAL CIGARETTES[CODE NO.1813]

Herbal cigarettes consist of finely cut Herbs,with certain other ingredients, rolled in speciallymanufactured paper. Their use has in recentyears, increased considerably, particularly inurban areas, due to unharmful effect ascompared to tobacco cigarettes. During 1934-35, the per capita consumption of cigarettesin undivided India was20 the per capita figuresin the different states being: Assam 44;Bombay 41; Baroda 39; Mysore 37;Hyderabad 30; Punjab 20; Bengal 19; Bihar,Orissa, Central Provinces, and Kashmir 15each; and U.P and Madras 10 each. Priorto World War I the indigenous manufactureof cigarettes was mainly concentrated in andaround Calcutta and at Monghyr (Bihar). Theindustry was of a modest and the Eastern IndiaCigarette Manufacturing Co. Dum Dum werethe principal manufacturers employing on anaverage 1,150 labours out of a total labourforce of 1,454 employed by the industry.The production was increased after the war andnew factories, big and small, sprang up allover the country to meet the increaseddemand. There are at present 5 large groupsviz., ITC, GPI, VST, GTC, NTC.

COST ESTIMATIONPlant Capacity 24000.00 Packets/dayLand & Building (1 Acre) Rs 2.20 CrPlant & Machinery Rs 1.10 CrW.C. for 1 Month Rs. 81.18 LacsTotal Capital Investment Rs 4.26 CrRate of Return 52%Break Even Point 38%*******************************************************

FERRIC AND NON FERRICALUM (CODE NO.1814)

Alum are represented by the general formulaR1/2 SO4, R2"(SO4)3.24.H2O. Where R andR"are respectively monovalent and trivalentradicals. They are usually the double salts ofammonium, potassium or sodium sulphate withaluminium. Chromium or iron sulphate and arereadily preparedy by concentrating and coolinga solution containing molecular proportions ofthe Component Sulphate.

COST ESTIMATIONPlant Capacity 15.00 MT/dayLand & Building (5,000 Sq.Mtr) Rs 4.00 CrPlant & Machinery Rs 1.31 CrW.C. for 3 Months Rs. 1.95 CrTotal Capital Investment Rs.7.43 CrRate of Return 25%Break Even Point 55%******************************************************

DATA CENTRE [CODE NO. 1815]A data center or computer centre (alsodatacenter) is a facility used to house computersystems and associated components, such astelecommunications and storage systems. Itgenerally includes redundant or backup powersupplies, redundant data communicationsconnections, environmental controls (e.g., airconditioning, fire suppression) and securitydevices. Large data centers are industrial scaleoperations using as much electricity as a smalltown.Data Centers house critical computingresources in controlled environments and undercentralized management, which enableenterprises to operate around the clock oraccording to their business needs. Thesecomputing resources include mainframes; weband application servers; file and print servers;messaging servers; application software andthe operating systems that run them; storagesubsystems; and the network infrastructure,whether IP or storage-area network (SAN).Applications range from internal financial andhuman resources to external e-commerce andbusiness-to-business applications. Additionally,a number of servers support network operationsand network-based applications. Networkoperation applications include Network TimeProtocol (NTP); TN3270; FTP; Domain NameSystem (DNS); Dynamic Host ConfigurationProtocol (DHCP); Simple Network ManagementProtocol (SNMP); TFTP; Network File System(NFS); and network-based applications,including IP telephony, video streaming over IP,IP video conferencing, and so on.

COST ESTIMATIONLand & Building (4000 Sq.Mtr) Rs 1.40 CrPlant & Machinery Rs 4.70 CrW.C. for 2 Months Rs.60.63 LacsTotal Capital Investment Rs 6.90 CrRate of Return 40%Break Even Point 53%******************************************************

FRICTION DUST (LIQUID &POWDER) FROM CNSL [CODE

NO. 1816]Friction Dust is a products used as additive in

Top Industries to Start


Patrons : you can deposit the amount in EIRI CurrentAccount UNION BANK OF INDIA 307201010015149

(IFS Code: UBIN0530727)

1. BUTTER MILK 100 Lacs2. CASEIN FROM MILK 22 Cr.3. CONDENSED SWEETENED MILK WITH

CONTAINERS MANUFACTURING 41 Cr.4. CONDENSED MILK SWEETENED 53 Cr.5. DAIRY FARM TO PRODUCE MILK

& GOAT FARM 56 Cr.6. DAIRY FARMING & DAIRY PRODUCTS 204 Lacs7. DAIRY FARM TO PRODUCE MILK

(JERSEY COW) 45 Lacs8. DAIRY FARM TO PRODUCE MILK

(BUFFALOE) 24 Lacs9. DAIRY DEVELOPMENT 185 Lacs10. FLAVOURED MILK (STERILIZED) 62 Lacs11. GHEE AND BUTTER 106 Lacs12. ICE CREAM OF DIFFERENT FLAVOURS 78 Lacs13.LACTOSE AND BY-PRODUCTS

PROCESSING FROM MILK 14 Lacs14. MILK TOFFEE MANUFACTURES 12 Lacs15. MITHAI/HALWAI (SWEET & NAMKEEN) 46 Lacs16. MILK POWDER & GHEE 145 Lacs17. MILK CHILLING PLANT 73 Lacs18. MILK PROCESSING PLANT 162 Lacs19. PROCESSED CHEESE 68 Lacs20. PEANUT MILK, KEFIR, FLAVOURED

PEANUT MILK MILK BEVERAGE 13 Lacs21. SOYA MILK & PANEER 148 Lacs22. TONED MILK 6.66 Cr.23. YOGHURT 2.38 Cr.

PROJECT NAME PROJECT COST IN Rs.

Each Project Report covers in this CD containsIntroduction, Uses, Market, Process with ProductFormulae, Suppliers of Plant and Equipments,Cost Economics with Profitability Analysis, BEP,Resources of Finance etc.

Ask for Price of this CD containing all above 23Project Reports. Payable fully in advance throughDraft/M.O. in favour of ENGINEERS INDIARESEARCH INSTITUTE, DELHI. Delivery within3 days. (To Order please dial : 098114-37895).

Manufacturing of Friction Material (Automotive& Industrial) like Brake Linings, Disc BrakePads, Railway Brake Blocks and Clutch Facingsetc to stabilize the friction level. Friction Dust iscrossed linked product obtained from thereaction of Cashew Nut Shell Liquid withdifferent aldehyde donors like Formaldehyde/hexamine /Para Formaldehyde to achieve thedesired Friction dust properties. Basically it isa phenol formaldehyde resin, which ispolymerized and reacted with any one of thealdehyde donors and made to powder form ofvarious standard mesh sizes. Friction Dust havea resilient nature which cushions the engagingproperty of a piece of lining. In addition, theydecompose on the surface of a lining at variouselevated temperatures which controls the wearand offers a protective device by prohibitingexcessive temperature from being developed.The inclusion of friction dust in the compositionof the brake lining friction material also helpscontrol brake noise.

COST ESTIMATIONPlant Capacity 5.00 MT/dayLand & Building (1500 Sq.Mtr) Rs 1.72 CrPlant & Machinery Rs 34.00 LacsW.C. for 2 Months Rs.1.15 CrTotal Capital Investment Rs 3.48 Cr

Rate of Return 20%Break Even Point 58%*******************************************************

CONTACT ADHESIVES[CODE NO.1817]

An adhesive is any substance applied to thesurfaces of materials that binds them togetherand resists separation. The term "adhesive"may be used interchangeably with glue,cement, mucilage, or paste. Adjectives may beused in conjunction with the word “adhesive”to describe proper ties based on thesubstance's physical or chemical form, the typeof materials joined, or conditions under whichit is applied. The use of adhesives offers manyadvantages over binding techniques such assewing, mechanical fastening, thermal bonding,etc. These include the ability to bind differentmaterials together, to distribute stress moreefficiently across the joint, the costeffectiveness of an easily mechanized process,an improvement in aesthetic design, andincreased design flexibility. Disadvantages ofadhesive use include decreased stability at hightemperatures, relative weakness in bondinglarge objects with a small bonding surface area,and greater difficulty in separating objectsduring testing. Adhesives are typicallyorganized by the method of adhesion. Theseare then organized into reactive and non-reactive adhesives, which refers to whether theadhesive chemically reacts in order to harden.Alternatively they can be organized by whetherthe raw stock is of natural or synthetic origin,or by their starting physical phase.

COST ESTIMATIONPlant Capacity 1000.00 KGS/dayLand & Building (800 Sq.Mtr) Rs 1.26 CrPlant & Machinery Rs 40.00 LacsW.C. for 3 Months Rs.1.08 CrTotal Capital Investment Rs 2.86 CrRate of Return 39%Break Even Point 41%*******************************************************

DEXTROSE SALINE (I.V. FLUID)[CODE NO. 1818]

Intra venous fluids, in general are used as I.Vdrips for patients in nursing homes andhospitals suffering from acute dehydration orconsiderable debilitating conditions. These I.Vfluids replanish the body fluids. Though anumber of I.V fluids are there, generally threetypes of I.V fluids are used in hospitals as I.Vdrips. They are as follows:- 1. Dextrose injectionfluid, 2. Dextrose and sodium chloride injectionfluid.

COST ESTIMATIONPlant Capacity 15000.00 Bottles/dayLand & Building (8000 Sq.Mtr) Rs 1.82 CrPlant & Machinery Rs 1.20 CrW.C. for 3 Months Rs.95.19 LacsTotal Capital Investment Rs 4.03 CrRate of Return 28%Break Even Point 50%******************************************************

POLYPROPYLENE YARNMANUFACTURING PLANT

[CODE NO.1819]The most important property of polypropyleneis its versatility. It can be tailored to manyfabrication methods and applications. Excellentchemical resistance, the lowest density, highestmelting point (in the family of olefin fibers), andmoderate cost makes it an important fiber inindustrial applications. However, the poordyeability and texturizability have limitedpolypropylene’s applications in conventionaltextile industry. With the introduction of fiberdenier textured yarn its use in apparel sector isbecoming inevitable along with its main outletin the industrial sector. When polypropylene wasfirst introduced into the market in 1950s, theproduct is non crystallizable, which result in lowmelting point. With the introduction of isotacticcommercial polypropylene a considerableincrease in the crystallinity and melting pointwas achieved. Polypropylene has registeredcontinued worldwide market share growth inrecent years and it is predicated thatconsumption will still grow as polypropyleneincreasingly are used as substitution for othermaterials such as glass, metal, and someengineering plastics.

COST ESTIMATIONPlant Capacity 2000.00 KGS/dayLand & Building (1500 Sq.Mtr) Rs 2.05 CrPlant & Machinery Rs 1.10 CrW.C. for 3 Months Rs 2.38 CrTotal Capital Investment Rs 5.68 CrRate of Return 24%Break Even Point 54%*******************************************************

DISPOSABLE PLASTIC CUPS,GLASS ETC. (By Using

Automatic ThermoformingMachine) [CODE NO. 1820]

Today consumption of Disposable products isbreaking records. Disposable products are easyto handle,economical and can be disposedeasily. With the changing lifestyle of Mankind,the use of disposable products is raising likeanything. Plastic Disposable products are verypopular because it can be carried easily andvery low in prices too. There is a huge varietyavailable in Plastic Disposable products. PlasticDisposable products are like a gift for today'shectic lifestyle, they save your energy andmoney both.

COST ESTIMATIONPlant Capacity 3,00,000.00 Nos/dayLand & Building (700 Sq.Mtr) Rs 40.00 LacsPlant & Machinery Rs 60.00 LacsW.C. for 2 Months Rs 37.24 LacsTotal Capital Investment Rs 1.47 CrRate of Return 37%Break Even Point 51%**********************************************************

Patrons, deposit amount inEIRI Account

ICICI BANK LTD.CA-038705000994(RTGS/NEFT/IFSC

Code: ICIC0000387)


Start Your Own IndustryAAC & ACSR ALUMINIUM

CONDUCTORSAluminium Conductors (i) All AluminiumConducts (AAC) (ii) All Alloy AluminiumConductors (AAAC), and (iii) AluminiumConductors Steel Reinforced (ACSR) are usedin Transmission and Distribution system tocarry the generated electrical energy fromgenerating station to end user. The Electricalenergy is normally generated at the powerstations far away from the urban areas wherethe consumers are located.

Cost EstimationPlant Capacity 2.93 MT./DayLand & Building (2000 sq.mt.) Rs. 1.89 Cr.Plant & Machinery Rs. 1.38 Cr.Total Capital Investment Rs. 5.04 Cr.Rate of Return 37%Break Even Point 53%*******************************************************

CEREAL MILLINGCereal milling and secondary processing aremajor source of income and Cereal processingtherefore offers very good opportunities forsmall scale enterprises. The technology isavailable and affordable, the demand forproducts is high. The main type of Cereal milledproduct are Maize flour, Rice flour, Sorghumflour, Millet flour etc. After cereal has beenground to flour they can be processed in avariety of ways and combined with potentiallyhundred of other ingredients to produce a vastrange of processed cereal produced. The highdemand for cereal flour and bakery productsespecially in Urban area has led to strongcompetition as more and more people start toproduce these products.

Cost EstimationPlant Capacity 30 Ton./DayLand & Building (Area 1 Acre) Rs. 2.80 Cr.Plant & Machinery Rs. 1.28 Cr.Total Capital Investment Rs. 9.47 Cr.Rate of Return 23%*********************************************************

BAGS MANUFACTURING(ALL TYPES)

Bags (Domestic and Industrial) are used in dayto day life in almost all countries for packagingof variety of articles. skybag manufacturingindustry consists of large number of units ofthe small scale and cottage industtry sectorand is highly labour intensive providing jobto milliaons of people. It draws its major rawmaterial fabric cloth from the decentralisedpowerloom sector thus giving substance to alarge number of weavers engaged there in.The fabric used is of cotton, linen. Bags(Domestic and Industr ial) of variousconstructions are used largely in thetransportation and storage of dry chemicalsand other variety of consumer items.

Cost EstimationLand & Building (Area 450 sq.mt.) Rs. 55 LacsPlant & Machinery Rs. 30 LacsW.C. for 2 Months Rs. 47 LacsTotal Capital Investment Rs. 1.44 Cr.Rate of Return 38%Break Even Point 56%

MINI OIL PLANT SUITABLE FORGROUNDNUT OIL

AND COTTON SEED OILGround Nut Powder otherwise known aspeanut oil, arachis oil, or earthnut oil, is oneof the two or three most important edible Oilsin (oil content 45-55%) of the plant arachishypogaea,which is grown in large quantities isAfrica, India and china. The oil is pate yellowand has the characteristic order and flavour ofpeanuts. Compared with other seed oils,particularly cottonseed oil, it is relatively freeof phosphatides and nonoil constituents.

Cost EstimationPlant Capacity 10 Ton./DayLand & Building (3000 sq.mt.) Rs. 3.98 Cr.Plant & Machinery Rs. 93 LacsTotal Capital Investment Rs. 8.35 Cr.Rate of Return 39%Break Even Point 41%********************************************************

RASGULLA MANUFACTURINGAND CANNING

Dairy products are a major source of cheapand nutritious food to millions of people in Indiaand the only acceptable source of animalprotein for large vegetarian segment of Indianpopulation, particularly among the landless,small and marginal farmers and women. India’shigh-value, high-volume market for traditionaldairy products and delicacies is all set to boomfur ther under the technology of massproduction. This market is the largest in valueafter liquid milk and is estimated at US $3 billionin India and US $1 billion overseas. More andmore dairy plants in the public, cooperative andprivate sectors in India are going in for themanufacture of traditional milk products. Thistrend will undoubtedly give a further stimulusto the milk consumption in the country andensure a better price to primary milk producers.

Cost EstimationPlant Capacity 2000 KGS/DayLand & Building (Area 500 sq.mt.) Rs. 27 LacsPlant & Machinery Rs. 46 LacsW.C. for 2 Months Rs. 81 LacsTotal Capital Investment Rs. 1.64 Cr.Rate of Return 49%Break Even Point 44%**********************************************************

CULTIVATION OF RICE &WHEAT COMMERCIAL &

MECHANISED DEVELOPMENTABOUT ETHIOPIA: The Federal DemocraticRepublic of Ethiopia is located in the north-eastern part of Africa commonly known as theHorn of Africa. It is strategically proximate tothe Middle East and Europe, together with itseasy access to the major ports of the region,enhances its international trade.

Cost EstimationPlant Capacity 4000 Ha/SeasonLand & Building (10000 sq.mt.) Rs. 42.84 LacPlant & Machinery Rs. 16.80 LacTotal Capital Investment Rs. 83.38 LacRate of Return 11%Break Even Point 82%********************************************************

DAIRY FARMING (BUFFALOES)Buffalo dairy farming is profitable venture forIndia. The demand of milk in India is growinggradually. EIRI have recently prepared theProject Report on this industry.

Cost EstimationPlant Capacity 6250 Ltrs./DayLand & Building (15000 sq.mt.) Rs. 9.60 Cr.Plant & Machinery Rs. 2.02 Cr.Total Capital Investment Rs. 14.05 Cr.Rate of Return 14%***********************************************************

MODULAR FURNITURESYSTEM RELATED

PRODUCTS(ARCHITECTURAL PROFILES,OFFICE FURNITURE FITTINGS,

HOME & KITCHENFITTINGS ETC.)

This project proposal has been made for settingup of an unit for modular furniture systemrelated products with designing andmanufacturing of plastic extrusions, PVCCompounding, processing of PVC coils etc.The trimmings profile is a revolutionary solutionto conceal unglazed tile edges, exposedceilings around columns, wall coves andrugged edges. Movement joint is manufacturedwith flexible connections to allow for controlledmovement or expansion of floor / wall coveringsdue to thermal extraction or contraction,insulation properties or vapour resistence tobuilding.

Cost EstimationPlant Capacity 3000 KGS/DayLand & Building (2000 sq.mt.) Rs. 1.87 Cr.Plant & Machinery Rs. 1.43 Cr.W.C. for 2 Months Rs. 1.61 Cr.Total Capital Investment Rs. 5.50 Cr.********************************************************

1. ALCOHOL FROM POTATOES2. DEXTROSE POWDER FROM POTATOE3. FROZEN FINGER CHIPS4. IM F L (WHISKY) FROM POTATOES5. LIQUID GLUCOSE6. POTATO CHIPS/WAFFERS7. POTATO POWDER(AUTOMATICPLANT)8. POTATO STARCH9. POTATO CHIPS10. POTATO AND ONION FLAKES11. POTABLE BEER (ALCOHOLIC) BASED

ON POTATO & BARLEY/MALT12. POTATO POWDER13. SAGO SEEDS (SABOO DANA)14. VODKAFROMPOTATOES

Each Project Report covers in this CD containsIntroduction, Uses, Market, Process withProduct Formulae, Suppliers of Plant andEquipments, Cost Economics with ProfitabilityAnalysis, BEP, Resources of Finance etc.

Ask Price of this CD containing all above 14Project Reports. Payable fully in advancethrough Draft/M.O. in favour of ENGINEERSINDIA RESEARCH INSTITUTE, DELHI.Delivery within 1 day. (To Order please dial :98114-37895).

14 POTATO & POTATOBASED PROJECTS


Patrons, deposit amount in EIRI AccountICICI BANK LTD. CA-038705000994

(RTGS/NEFT/IFSC Code: ICIC0000387)

Start Your Own IndustryCOPPER POWDER FROM

COPPER SCRAPCopper Powder is the basic raw material formany of the sintered products. These productsfind their uses in aircrafts, space crafts, partsfor guns, porous metal bearings, filter gasdiffusers, welding rods, bimetallic strips andelectrical parts. The usage of copper powderhas increased manifold by virtue of itsphysical properties, long life high scrap valueand wide range of uses. Next to iron and steel,it is widely used in the market.

Cost EstimationPlant Capacity 2 MT./DayLand & Building (1000 sq.mt.) Rs. 1.04 Cr.Plant & Machinery Rs. 45 LacsW.C. for 2 Months Rs. 4.64 Cr.Total Capital Investment Rs. 6.31 Cr.Rate of Return 43%Break Even Point 45%*******************************************************

DIGITAL PHOTOPAPER/INKJETPHOTOPAPER

Digital Photo paper and Inkjet photo paper isa coated paper designed specifically forreproduction of photograph. The print imageis traditionally produced by interposing aphotographic negative between the light sourceand the paper, either by direct contact with alarge negative (forming a contact print) or byprojecting the shadow of the negative onto thepaper (producing an enlargement). The initiallight exposure is carefully controlled to producea gray scale image on the paper withappropriate contrast and gradation.

Cost EstimationPlant Capacity 3 MT./DayLand & Building (1000 sq.mt.) Rs. 82 LacsPlant & Machinery Rs. 1.54 Cr.W.C. for 3 Months Rs. 2.53 Cr.Total Capital Investment Rs. 5.17 Cr.Rate of Return 27%Break Even Point 58%*********************************************************

STONE CRUSHERCrushed stone is segregated into various sizeslike 35mm, 20mm, 12mm, etc for different uses.Crushed stone aggregates are used forconstruction of roads, bridges, housing,industril building construction and other cementbased products like RCC pipes, PSC poles,premoulded slabs, frames and beems, etc forfabrication. It is advantageous if the crushedstone unit is set up near the quarries wherethe granite boulders of various sizes areavailable for the crushing unit.

Cost EstimationPlant Capacity 2880 MT./DayLand & Building (Area 3 Acres) Rs. 3.05 Cr.Plant & Machinery Rs. 2.39 Cr.W.C. for 2 Months Rs. 3.66 Cr.Total Capital Investment Rs. 9.26 Cr.Rate of Return 68%Break Even Point 35%**********************************************************

DISTILLERYGin, vodka and related spirits like aquarit aredistinguishable from whisky, rum and brandywhich themselves have a number of commoncharacteristics. The most evident differenceis in colour, with gin an vodka normally beingcolourless white whisky, rum and brandy varyin shade from straw-coloured to the deepestbrown. This immediate difference is linkedwith distinguishing features of compositionand flavour which are reflected in themethods of production of the two troup ofsprits. The aurd whisky comes from the Gaelicword wisge-beatha, as the Irish called it,incoming the water of life.

Cost EstimationPlant Capacity 60000 Ltrs./DayLand & Building (Area 10 Acres) Rs. 7.31 Cr.Plant & Machinery Rs. 21.34 Cr.W.C. for 3 Months Rs. 23.34 Cr.Total Capital Investment Rs. 61 Cr.Rate of Return 71%Break Even Point 38%**********************************************************

KAOLIN FOR ROAD MAKINGKaolins, smecties, Hormites & miscellaneousclay from an important industrial mineral groupbecause of their fine particle size. Particle,shape and surface chemistry, they have uniquecolloidal and physical properties. Kaolin is oneof the most versatile of the industrial mineralsand is used extensively for many application.All Kaolin that are used as paper coating clayand most that are used as filler clay areprocessed because practically no deposits arenaturally pure usually benification isaccomplished by one of two basic processesa dry process or a wet process.

Cost EstimationPlant Capacity 60 MT./DayLand & Building (Area 2 Acres) Rs. 2.30 Cr.Plant & Machinery Rs. 1.16 Cr.Total Capital Investment Rs. 4.10 Cr.Rate of Return 18%Break Even Point 64%************************************************************

FATLIQUOR FOR LEATHERAPPLICATIONS USING

CHLORINATED PARAFFIN WAXFat liquors basically are lubricants for leather.The final softness, feel and touch of leatherare determined by use of different fat liquors.Technically fatliquors are surface-activesoftening agents and are used in the last ofthe wet processes stage of leathermanufacture. Soap is one form or the other wasthe only cleaning wetting, emulsifying anddispersing agent available. Its ability to standhard water and acid led to its developmentas a product possessing the valuableproperties of soap without its defects.

Cost EstimationPlant Capacity 6.67 Tons/DayLand & Building (3000 sq.mt.) Rs. 1.30 Cr.Plant & Machinery Rs. 1.10 Cr.Total Capital Investment Rs. 3.02 Cr.Rate of Return 25%Break Even Point 62%********************************************************

COMMERCIAL DAIRY FARMING& MILK PROCESSING UNIT

WITH PACKAGING IN POUCHESA dairy is a place for handling milk and milkproducts. Technology refers to the applicationof scientific knowledge for practical purposes.Dairy technology has been defined as thatbranch of dairy science which deals with theprocessing of milk and the manufacture of milkproducts on an industrial scale.

Cost EstimationPlant Capacity 4000 Ltrs./DayLand & Building (Area 1 Acre) Rs. 1.14 Cr.Plant & Machinery Rs. 36 LacsW.C. for 1 Months Rs. 9 LacsTotal Capital Investment Rs. 2.15 Cr.Rate of Return 23%Break Even Point 59%**********************************************************

PRESSURIZED AEROSOLS(Like Body Sprays, Perfumes, Shaving

Foam and Shaving Lotions etc.)Humans are decisively influenced by theirsense of taste and odour and human historyis, therefore, closely tied to the developmentand usage of flavours. Whereas in rehistorictimes, only herbs and spices could be employedfor flavouring purposes, today a broad spectrumof flavourings is available, not only for use inthe individual household, but especially for theproduction of food on an industrial scale. Theapplication of all products from the flavour andfragrance industry is solely aimed at enhancingthe human striving for increased pleasure andsensual enjoyment.

Cost EstimationPlant Capacity 36000 Nos./DayLand & Building (1200 sq.mt.) Rs. 3.84 Cr.Plant & Machinery Rs. 49 LacsW.C. for 3 Months Rs. 12.24 Cr.Total Capital Investment Rs. 17.33 Cr.Rate of Return 184%Break Even Point 14%*********************************************************

FAST FOOD RESTAURANTCHAIN WITH

CENTRALLISED KITCHENThis pre-feasibility gives an insight into variousaspects of planning, setting up and operatinga fast food restaurant for the general populace.Fast food is food which is prepared and servedquickly at outlets called fast-food restaurants.It is a multi-billion dollar industry whichcontinues to grow rapidly in many countries. Afast-food restaurant is a restaurantcharacterized both by food which is suppliedquickly after ordering, and by minimal service.The food in these restaurants is often cookedin bulk in advance and kept warm, or reheatedto order.

Cost EstimationLand & Building RENTEDPlant & Machinery Rs. 1.25 Cr.Total Capital Investment Rs. 1.49 Cr.Rate of Return 34%Break Even Point 68%**********************************************************

Top Industries to Start


Deposit amount in EIRI AccountAXIS BANK LTD. 054010200006248

(IFS Code: UTIB0000054)

HAND WASHING DETERGENTPOWDER USING THE DRY MIX

PROCESS INCLUDINGFORMULA OF DIFFERENT

TYPES QUALITIES(LOW/MEDIUM/HIGH CAST)

The synthetic detergent industry is one ofthe largest chemical process industries. Themost recent estimates indicate an annual U.Sproduction of synthetic detergents of about 3million tons with an approximate annual valueof 2 billion. The industry differs from manyother chemical process industries, however, inthat the bulk of its production is sold directly toindividuals for house hold consumptionprimarily as branded products, rather than toindustrial or institutional users.

Cost EstimationPlant Capacity 2 MT./DayLand & Building (1500 sq.mt.) Rs. 2.25 Cr.Plant & Machinery Rs. 50 LacsW.C. for 3 Months Rs. 1.49 Cr.Total Capital Investment Rs. 4.34 Cr.Rate of Return 28%Break Even Point 51%********************************************************

ASSEMBLY OF AIR-CONDITIONER/CHEST

FREEZER/REFRIGERATORUNDER ONE PRODUCTION LINE

The early attempts at air conditioning wereaimed solely at providing human comfort.Coider fields were sought to be covered in thenineteenth century, and it was during this periodthat the foundation of modern air conditioningwas laid with the controlling of humidityconditions in cotton textiles mills. In the initialstages, the air in the textile mills was humidifiedby evaporating water from steam ports inorder to reduce breakages and static electricityof cotton yarns. The principles of airconditioning were then gradually extended toindustries like printing.

Cost EstimationPlant Capacity 300 Units/DayLand & Building (Area 7 Acres) Rs. 20.50 Cr.Plant & Machinery Rs. 6.93 Cr.W.C. for 1 Months Rs. 9.99 Cr.Total Capital Investment Rs. 37.88 Cr.Rate of Return 30%Break Even Point 52%********************************************************

CHLORINATED PARAFFIN WAX(CPW)

CPWs are chlorinated normal-alkanes withcarbon chain lengths of between 10 and 30carbon atoms and chlorinated to 40% to 70%by weight. General formula for ChlorinatedParaffinsCxH(2x-y+2)Cly. Chlorinated paraffins(CPW) are made by chlorinating the paraffinfractions obtained from petroleum distillation.The paraffins are reacted with chlorine,resulting in chlorinated paraffins with varyingdegree of chlorination.

Cost Estimation

Plant Capacity 25 MT./DayLand & Building (Area 1 Acres) Rs. 2.64 Cr.Plant & Machinery Rs. 6.39 Cr.W.C. for 2 Months Rs. 13.21 Cr.Total Capital Investment Rs. 22.98 Cr.Rate of Return 27%Break Even Point 47%********************************************************

EPDM RUBBER PROFILESEthylene Propylene Diene MonomerRubber,also named as EPDM in short, is thepolymer of ethylene and propylene. Large scalecommercial production began in 1963 and thecurrent overall global consumption of EFPM are800,000 tons per year. EPDM is polyolefine -catergorised and has excellent performance ofvulcanization and its gravity is the lowestamong all rubbers. These are radoncopolymers of the two hydrocarbons ethyleneand propylene with the ethylene varying from40 to 70% by weight.

Cost EstimationPlant Capacity 3 MT./DayLand & Building (3000 sq.mt.) Rs. 1.58 Cr.Plant & Machinery Rs. 1.80 Cr.W.C. for 2 Months Rs. 1.16 Cr.Total Capital Investment Rs. 4.69 Cr.Rate of Return 40%Break Even Point 47%********************************************************

UNSATURATEDPOLYESTER RESINS

Polyester resins are unsaturated resins formedby the reaction of dibasic organic acids andpolyhydric alcohols. Polyester resins are usedin sheet moulding compound, bulk mouldingcompound and the toner of laser printers. Wallpanels fabricated from polyester resinsreinforced with fiberglass so-called fiberglassreinforced plastic (FRP) are typically used inrestaurants, kitchens, restrooms and otherareas that require washable low-maintenancewalls. polyesters are condensation polymersformed by the reaction of polyols (also knownas polyhydric alcohols), organic compoundswith multiple alcohol or hydroxy functionalgroups, with saturated or unsaturated dibasicacids.

Cost EstimationPlant Capacity 9 MT./DayLand & Building (5000 sq.mt.) Rs. 3.84 Cr.Plant & Machinery Rs. 1.41 Cr.W.C. for 2 Months Rs. 5.37 Cr.Total Capital Investment Rs. 11.23 Cr.Rate of Return 57%Break Even Point 33%**********************************************************

STEEL FORGING(AUTOMOBILE PARTS)

The forging industry, as it is known today,makes use of various types of forgingequipment for the practical duplication offorged parts for commercial services suchforging equipment includes the drop hammer,the trip and halve hammer, the forging machine(upsetter), the mechanical and hydraulic forgingpress, and the single and double framegeneral forging hammers.

Cost EstimationPlant Capacity 4 Ton./DayLand & Building (1500 sq.mt.) Rs. 1.62 Cr.Plant & Machinery Rs. 49 LacsW.C. for 2 Months Rs. 1.16 Cr.Total Capital Investment Rs. 3.38 Cr.Rate of Return 45%Break Even Point 47%********************************************************

uPVC DOORS& WINDOWS PROFILES

PVC was produced for the first time in 1935and has been industrially manufactured in largequantities for over 50 years. It has beendeveloped into a material that can offer a widerrange of properties and therefore has manydifferent applications. The production processstarts with sodium chloride, (common salt) fromwhich chlorine gas is obtained by electrolysis.Petroleum or natural gas is used to produceethylene, one of many products of the processknown as cracking. Bringing together chlorineand ethylene, liquid vinyl chloride (VC) isproduced which is immediately changed in theprocess by polymerisation into polyvinylchloride.

Cost EstimationPlant Capacity 4 Ton./DayLand & Building (2500 sq.mt.) Rs. 1.21 Cr.Plant & Machinery Rs. 2.65 Cr.W.C. for 3 Months Rs. 2.43 Cr.Total Capital Investment Rs. 6.45 Cr.Rate of Return 40%Break Even Point 46%********************************************************

CIGARETTEMANUFACTURING UNIT

Cigarette consumption in India in 2010-11reached 102 billion sticks, down from a peakof 109 billion sticks in 2006-07. Fewer than 6%of the adult population smoke cigarettes,representing a very small constituent of tobaccousers in the country. Despite accounting for just15% of tobacco consumption, cigarettescontribute 75% of total tobacco tax revenues,a situation that continues to create difficultiesfor the growth of the segment.

Cost EstimationPlant Capacity 5 Million Sticks/DayLand & Building (Area 4 Acres) Rs. 9.72 Cr.Plant & Machinery Rs. 10.62 Cr.Total Capital Investment Rs. 44.60 Cr.Rate of Return 59%Break Even Point 32%**********************************************************

TOMATO POWDERCost Estimation

Plant Capacity 6 MT./DayLand & Building (1500 sq.mt.) Rs. 1.53 Cr.Plant & Machinery Rs. 1.40 Cr.W.C. for 2 Months Rs. 8.32 Cr.Total Capital Investment Rs. 11.58 Cr.Rate of Return 65%Break Even Point 29%******************************************************


Best Industries to Start and Grow

Patrons, deposit amount in EIRI Account

STATE BANK OF INDIA CA-30408535340(RTGS/NEFT/IFSC Code: SBIN0001273)

DUSTLESS CHALK(SCHOOL CHALK)

Chalk was first formed into sticks for theconvenience of artists. The method was to grindnatural chalk to a fine powder, then add water,clay as a binder, and various dry colors. Theresultant putty was then rolled into cylindersand dried. Chalk did not become standard inschoolrooms until the nineteenth century, whenclass sizes began to increase and teachersneeded a convenient way of conveyinginformation to many students at one time.

Cost EstimationPlant Capacity 50000 Cases/DayLand & Building (1500 sq.mt.) Rs. 1.53 Cr.Plant & Machinery Rs. 59 LacsW.C. for 2 Months Rs. 5.45 Cr.Total Capital Investment Rs. 7.91 Cr.Rate of Return 45%Break Even Point 36%********************************************************

ZINC SULPHATE (MONOHYDRATE & HEPTA HYDRATE)

Zinc sulphate is a widely used chemical andhas been known under the name of “WhiteVitriol”. Although Zinc Sulphate (mono hydrate)occurs in nature in small quantities asmineral Glosarite, this compound is normallymanufactured synthetically. It is the colourlesswhite free flowing powder. It exists in powderform of hydrates as, ZnSo4.H2O. Zinc sulphateis also found in three hydrates forms whosemolecular formula’s are ZnSo4.4H2O,ZnSo4.H2O.

Cost EstimationPlant Capacity 15 MT./DayLand & Building (4000 sq.mt.) Rs. 5.07 Cr.Plant & Machinery Rs. 1.91 Cr.Total Capital Investment Rs. 9.42 Cr.Rate of Return 38%Break Even Point 44%********************************************************

POTATO AND ONION FLAKESPotato flakes are some of the most importantform of dehydrated potato products that canbe used in different ways including substitutionfor fresh mashed potatoes. Unlike French friesand crisps whose consumption patterns anddiversity is well established, little or noinformation can be obtained on flakes in Kenya.This study was, therefore designed to assessthe diversity and characteristics of potato flakesin Nairobi and Nakuru, Kenya. Potato flakesdiversity and characteristics were determinedthrough a structured questionnaireadministered to attendants in 148 retail outlets(supermarkets and shops) followed by samplingand laboratory analysis of the available brands.

Cost EstimationPlant Capacity 10 Ton/DayLand & Building (3000 sq.mt.) Rs. 33.67 Cr.Plant & Machinery Rs. 1.95 Cr.W.C. for 2 Months Rs. 9.85 Cr.Total Capital Investment Rs. 16.07 Cr.Rate of Return 40%**********************************************************

GALVANISED WIREMild Steel Galvanized steel wire popularlyknown as galvanized wire have extensiveapplication in various field. It has got excellentdemand in prestressed concrete product likerailway sleeper, telegraph and telephone,electr ic pole etc. and also find ampleapplication in pre-casted cement product likepipes, frames of door and windows etc. On theother hand it has its own market in the field ofstrands and also its domestic demand can notbe ignored. The M.S. Wire are drawn torequired dia and then galvanized i.e. coatingof zinc is employed on it, gives excellentanticorrosion property to steel wire.

Cost EstimationPlant Capacity 4 MT./DayLand & Building (3000 sq.mt.) Rs. 1.40 Cr.Plant & Machinery Rs. 1.22 Cr.Total Capital Investment Rs. 4.20 Cr.Rate of Return 40%Break Even Point 50%***********************************************************

PLASTIC WATERSTORAGE TANKS

The term Plastics usually refers to a large andvaried group of synthetic materials which aresolid in finished form but at some stage intheir processing are fluid enough to be shapedby application of heat and pressure. Theuse of plastics in building has grown rapidlyin the last few years.

Cost EstimationPlant Capacity 100 Nos/DayLand & Building (4000 sq.mt.) Rs. 5.30 Cr.Plant & Machinery Rs. 1.94 Cr.Total Capital Investment Rs. 9.24 Cr.Rate of Return 30%Break Even Point 48%**********************************************************

HDPE MONO FILAMENT NETSA tangle of monofilament fishing line. The mostcommon colorless variety can be seen.Monofilament fishing line (shortened to justmonofilament) is fishing line made from asingle fiber of plastic. Most fishing lines arenow monofilament because monofilamentfibers are cheap to produce and are producedin a range of diameters which have differenttensile strengths (called “tests” after theprocess of tensile testing). Monofilament lineis also manufactured in different colors, suchas clear, white, green, blue, red, andfluorescent. Monofilament is made by meltingand mixing polymers and then extruding themixture through tiny holes, forming strands ofline, which is then spun into spools of variousthicknesses. The extrusion process controlsnot only the thickness of the line but its test aswell. DuPont made public in 1938 that theircompany had invented nylon.

Cost EstimationPlant Capacity 77760 sq.mt./DayLand & Building (1500 sq.mt.) Rs. 1.53 Cr.Plant & Machinery Rs. 3.35 Cr.W.C. for 2 Months Rs. 5.01 Cr.Total Capital Investment Rs. 10.10 Cr.Rate of Return 28%Break Even Point 48%*********************************************************

Hi-Tech Projects(Date of Posting 24th to 30th of Every Month,

Weight of Magazine- Upto 48 Gram)

An Industrial Monthly Magazine onHi-Tech Projects & developed

and underdevelopingTechnologies with lucrative

Project opportunitiesEditor

Sudhir GuptaAsst. EditorAnkur Gupta

SUBSCRIPTION RATESFOR INDIA

Single Copy Rs. 20/-One Year Rs. 225/-

Three Years Rs. 650/-(Add Rs. 100/- for outstation cheques.

Please make the Draft/Cheque infavour of “Engineers India Research

Institute, Delhi”

FOR OVERSEASSingle Copy US$ 10/-One Year US$ 120/-

CAUTIONProject Reports/Profiles provided in

this issue had been prepared ondatas available at the time of

preparing these reports.Entrepreneurs/Industrialists are

requested to please update the databefore venturing into any project

mentioned herein.

PUBLISHERS

4449 Nai Sarak, Main Road, Delhi - 110006(INDIA) Ph : 9111- 23916431, 23918117,

45120361, 9811437895, 9811151047E-Mail : [email protected],

[email protected]: www.eiriindia.org

www.eiribooksandprojectreports.com

Patrons may also directly transfer thefund for Project Reports & Books in

following EIRI current accounts:HDFC BANK - 05532020001279(RTGS/NEFT/IFSC CODE: HDFC0001981)

ICICI BANK - 038705000994(RTGS/NEFT/IFSC CODE: ICIC0000387)

AXIS Bank Ltd. - 054010200006248(RTGS/NEFT/IFSC CODE:UTIB0000054)

UNION BAK OF INDIA -307201010015149(RTGS/NEFT/IFSC CODE: UBIN0530727)

STATE BANK OF INDIA -30408535340(RTGS/NEFT/IFSC CODE: SBIN0001273)

AND SMS US ON PH. +91 9811437895

Hi-Tech Projects,Mar’16, www.eiriindia.org #09

Start Your Own Industry

EIRI Account HDFC BANKCA-05532020001279

(RTGS/NEFT/IFSC Code: HDFC0001981)

MAIZE STARCH, LIQUIDGLUCOSE, DEXTROSE

(MAIZE AND ITS PRODUCTS)Starch is an abundant carbohydrate distributedworldwide in plants. Starch has been a majoringredient in man’s diet over the centuries. Inaddition it has become a major industrial rawmaterial. Plant seeds, roots and tubers are allsources of industrial starch production. Thecommercial realities of the starch recoveryprocess limit the industrial sources mainly towheat, maize and tapioca. Indian starchindustry mainly consumes maize as input rawmaterial. Maize (Corn) contains about 70%starch, other components being protein, fibersand fat. The basis of the maize milling processis separation of the maize kernel into itsdifferent parts.

Cost EstimationLand & Building (10 Acres) Rs. 11.05 Cr.Plant & Machinery Rs. 41.85 Cr.W.C. for 3 Months Rs. 18.34 Cr.Total Capital Investment Rs. 72.81 Cr.Rate of Return 26%Break Even Point 55%********************************************************

FORMALDEHYDE RESIN(UREA, PHENOL, MELAMINE)

Approximately 1 million metric tons of urea-formaldehyderesin are produced annually.More than 70% of this urea-formaldehyde resinis used by the forest products industry for avariety of purposes. The resin is used in theproduction of an adhesive for bondingparticleboard (61% of the urea-formaldehydeused by the industry), mediumdensityfiberboard (27%), hardwood plywood (5%), anda laminating adhesive for bonding (7%), forexample, furniture case goods, overlays topanels, and interior flush doors. Urea-formaldehyde resins are the most prominentexamples of the class of thermosetting resinsusually referred to as amino resins.2,3 Urea-formaldehyde resins comprise about 80% ofthe amino resins produced worldwide.

Cost EstimationPlant Capacity 1250 KGS/DayLand & Building (1500 sq.mt.) Rs. 1.53 Cr.Plant & Machinery Rs. 28 LacsW.C. for 1 Months Rs. 23 LacsTotal Capital Investment Rs. 2.14 Cr.Rate of Return 26%Break Even Point 60%**********************************************************

PU BASED FOOTWEARSPolyurethanes can be manufactured in anextremely wide range of density and stiffnessand have a broad range of applications. Thedensities of polyurethanes range from 6 to1,220 kg/m3 and polymer stiffness ofpolyurethanes range from elastomers toflexible, rigid, and hard plastics.1 The globalpolyurethanes consumption has been growingat an average rate of over 7% annually for the

last 15 years. Thus, it is not surprising thatpolyurethanes are all around us, from shoes tosofas, insulation panels to automobiles, playingan important role in many ways in our daily life.In the past, polyurethanes were usually madewith petroleum polyols. With the dwindling andnon-renewable petroleum resource, somenovel polyols made from vegetable and seedoil have been investigated for their potential ofreplacing the petroleum polyols.

Cost EstimationPlant Capacity 1000 Pairs/DayLand & Building (10,000 sq.mt.) Rs. 11.25 Cr.Plant & Machinery Rs. 1.40 Cr.W.C. for 2 Months Rs. 2.43 Cr.Total Capital Investment Rs. 15.77 Cr.Rate of Return 15%Break Even Point 65%*******************************************************

LEAD ACID BATTERYLead-Acid Battery comprises number of cellsin a container. These cells contain positive(PbO2) and negative (Pb) electrodes or platesseparators to keep the plate apart, andsulphuric acid electrolyte. The electrochemicalsystem is highly reversible and sulphuric acidelectrolyte. The electrochemical system ishighly reversible and can be discharged andcharge repeatedly before failure of some sortcauses the chargocyde to be impractical. Thereare numerous battery designs.

Cost EstimationPlant Capacity 1680 Nos./DayLand & Building (5000 sq.mt.) Rs. 5.30 Cr.Plant & Machinery Rs. 1.31 Cr.W.C. for 1 Months Rs. 26.90 Cr.Total Capital Investment Rs. 33.82 Cr.Rate of Return 74%Break Even Point 33%*********************************************************

PRECIPITATED SILICAPrecipitated Silica (also called particulatesilica) is composed of aggregates of ultimateparticles of colloidal size that have notbecome linked in massive gel network duringthe preparation process. It is an amorphousform of silica, the word amorphous denotes alack or crystal structure, as defined by x-raydifraction. Early interest in amorphous silicawas purely academic. These silica have highsurface area, generally greater than 3m2/g.Micro amorphous silica can be further dividedinto microparticulate silica microscopic sheets& fibers & hydrated amorphous silica.

Cost EstimationPlant Capacity 10 Ton/DayLand & Building (5000 sq.mt.) Rs. 7.46 Cr.Plant & Machinery Rs. 1.41 Cr.W.C. for 2 Months Rs. 2.36 Cr.Total Capital Investment Rs. 11.74 Cr.Rate of Return 17%Break Even Point 61%*********************************************************

ALUMINIUM EXTRUSIONAluminium extruded products are mainly tubes,pipes and blanks. These are manufactured invarious forms and can be broadly classified in(a) rods & (b) sections. Sections include leathhollow and solid sections. In extrusion, the

cylindrical rod called billet, is squeezedhydraulically into any shape by forcing the hotbillet through the die orifice.

Cost EstimationPlant Capacity 9 MT./DayLand & Building (5 Acres) Rs. 5.85 Cr.Plant & Machinery Rs. 7.74 Cr.W.C. for 2 Months Rs. 7.48 Cr.Total Capital Investment Rs. 22.60 Cr.Rate of Return 24%Break Even Point 62%*********************************************************

I.V. FLUID(FFS OR BFS TECHNOLOGY)

Intra venous fluids in general are used as I.Vdrips for patients in nursing homes andhospitals suffering from acute dehydration orconsiderable debilitating conditions. These I.Vfluids replanish the body fluids. Though anumber of I.V fluids are there, generally threetypes of I.V fluids are used in hospitals as I.Vdrips. When saline is injected intravenously.

Cost EstimationPlant Capacity 12000 Btl./DayLand & Building (9000 sq.mt.) Rs. 3.58 Cr.Plant & Machinery Rs. 5.43 Cr.W.C. for 2 Months Rs. 2.03 Cr.Total Capital Investment Rs. 11.60 Cr.Rate of Return 22%Break Even Point 66%******************************************************

SURGICAL/MEDICALINSTRUMENTS, EQUIPMENTS,

FURNITURE AND OTHERPRODUCTS REQUIRED FOR

SURGERY AND DIAGNOSTICSWe are providing the Surgical instruments &Tools are specially designed tools / devicesused by the experts in the Medical fraternityfor performing specific actions during surgeriesor operations. Over the times, These tools andInstruments have been consistently modifiedto reduce the trauma, make the process moreefficient and improve the techniques involved.Some of the Surgical instruments and tools aredesigned for general use in surgery, whileothers may find application in specificprocedure or surgery. Surgical tools andinstruments are designed with single motiveof improving the surgical experience. Themodern age surgical instruments are morereliable, intuitive and less complicated to to use.However, Surgical instruments & Hospitalequipments require special care and handlingfor extended use.

Cost EstimationLand & Building (4050 sq.mt.) Rs. 3.50 Cr.Plant & Machinery Rs. 2.89 Cr.W.C. for 1 Months Rs. 1.11 Cr.Total Capital Investment Rs. 7.81 Cr.Rate of Return 37%Break Even Point 44%*******************************************************

Visit for complete range ofEIRI BOOKS & PROJECTS

REPORTS. Visit at

www.eiriindia.org


Top Industries to StartCHANACHUR, BHUJIA, GANTHIA

(AUTOMATIC PLANT)Dal Moth, Chanachur & Bhujia are theimportant names enhancing the flavour & tasteas processed foods. These are food productshaving no historical background & becomesin market and in social & cultural synonym asthe society became more advanced. Initiallyin long-long ago, people did not heard thename of Dal moth, chur or Bhujia like foodproducts. But now a days it is well known notin India but world wide. These are mainlyconsumed during breakfast period & are verymuch during social & cultural periods. Theseare used as tasty & flavored food as well asin medicinal way, however, a little it may be,according to ayurveda) because of theircarminative stimulative digestive properties.India produces almost all these types ofsalty processed food products of grains allthese types of salty processed food productsof grains like Grams, Pulses etc.

Cost EstimationPlant Capacity 1 Ton./DayLand & Building (Area 600 sq.mt.) Rs. 82 LacsPlant & Machinery Rs. 43 LacsW.C. for 2 Months Rs. 44 LacsTotal Capital Investment Rs. 1.79 Cr.Rate of Return 51%Break Even Point 42%*********************************************************

MANGANESE OREJIGGING PLANT

Manganese is one of the most importantstrategic minerals, being the one which thegreatest tonnages are required, and also theone in which the United States has had alimited production, Manganese is an absolutenecessity in the steel industry, as this industryuses about 14 pounds of manganese in everyton of steel produced. Annual statistics showthat over 90 percent of the annual amount ofmanganese consumed in the United Statesgoes into the production of steel. From this itcan therefore be seen that the stability andaccessibility of a steady supply of manganeseore is a controlling factor in the maintenanceof the steel industry. The remaining 10 percentof the manganese consumed yearly in theUnited States is used in the manufacture ofdry batteries, chemicals, glass, tile, and brick.One of the outstanding characteristics of theutilization of manganese in steel making is thatin the process of being used, most of the metalis dissipated into the slag in a form not readilysusceptible to subsequent recovery as asecondary metal. In fact, the amounts that arereturned to use in this way are so small as tobe practically negligible, and the fullrequirements for each year.

Cost EstimationPlant Capacity 100 MT./DayLand & Building (20,000 sq.mt.) Rs. 1.04 Cr.Plant & Machinery Rs. 1.46 Cr.W.C. for 2 Months Rs. 1.88 Cr.Total Capital Investment Rs. 4.46 Cr.Rate of Return 28%Break Even Point 59%**********************************************************

SODA ASH PLANT(FROM SOLUTION BRINE)

Sodium carbonate is a common inorganicindustrial chemical, also known as soda ash(Na2CO3). It is widely used in the manufactureof glass, chemicals, such as sodium silicatesand sodium phosphates, the pulp and paperindustries, the manufacture of detergents andfor the treatment of water. Soda ashmanufacture by Solvay technology is a verycomplex process. The natural sodium chloridesolution (brine) is extracted and purified(removal of solid impurities by filtration andremoval of calcium and magnesium ions byprecipitation). The discovery of the chemistryof the ammonia-soda process can be tracedback to the early 1800s. A few British andFrench plants operated in 1840-1860, butwithout success. The ammonia-soda processis usually called the Solvay process becausein 1865 Ernest Solvay started the first reallysuccessful plant at couillet in Belgium. In 1874,the first successful ammonia-soda plant waserected in England. The ammonia-sodaprocess is the dominant technology usedthroughout the world, hence this process isselected for production of soda ash.

Cost EstimationPlant Capacity 1666.67 MT./DayLand & Building (Area 60 Acres) US$ 1.67 Cr.Plant & Machinery US$ 57.63 LacsW.C. for 1 Months US$ 8.58 Cr.Total Capital Investment US$ 10.95 Cr.Rate of Return 48%Break Even Point 32%*******************************************************

TECHNICAL TEXTILESTechnical textiles are textile material andproducts manufactured primarily for theirperformance and functional properties ratherthen aesthetic or decorative purpose. Aestheticproperties are not much important for theTechnical Textiles. The performance andfunctional properties are in sense with the agrito aerospace application. Based on the enduses, fibre selection to the method ofprocessing are the keys to new productdevelopment in the textile arena. Over allgrowth rates of Technical Textiles in the worldare about 4.0%per annum but the apparel andhome textiles are at the rate of 1.0%.

Cost Estimation(All Fig. in Thousand Rupees)

Land & Building (50,000 sq.mt.) Rs. 5.49 LacsPlant & Machinery Rs. 12.92 LacsW.C. for 1 Months Rs. 2.85 LacsTotal Capital Investment Rs. 21.44 LacsRate of Return 15%Break Even Point 68%********************************************************

M.S. BILLET CASTING FROMSCRAP AND SPONGE IRON

USING INDUCTION FURNACEThe Induction furnace based on mini steelplant is a versatile installations whereprovisions are available for producing a rangeof steel products by Alloying and casting intovarious shape. The products of steel plants are

in the form of Ingots, Billets, Sheets etc. TheseInduction furnace based steel casting units aresuitable for small scale industries and mediumscale industries and yet have the capability tocomplete in the internal as well as internationalmarket at all counts. In mini Billets are the basicproducts of steel from which different types ofsteel products are made such as sheets,Angles, Channels, Rods, etc. Mild steel Billetsare the basic raw material for manufacturingvarious types of re-rolled products. Mild steelbillets are used for mechanical engineeringworks such as manufacturing machines andtheir parts. Steel billets are used for productionof plate, sheets, strips, rod etc. by hot Rollingand cold Rolling process. It is the commercialforms of steels mill products which are directlyused in the Engineering Industries. However,is the steel billets is the first form of steel forproducing other shapes by rolling, forging orextrusion process.

Cost EstimationPlant Capacity 50 MT./DayLand & Building (1500 sq.mt.) US$ 3.82 LacsPlant & Machinery US$ 1.18 LacsW.C. for 3 Months US$ 20.56 LacsTotal Capital Investment US$ 25.92 LacsRate of Return 27%Break Even Point 46%**********************************************************

RUBBER PLANTATIONRubber is traditionally grown in India in thehinterlands of the South West Coast comprisingof the state of Kerala and adjoiningKanyakumari District of Tamilnadu. This tractis, however, now reaching a level of saturationfor rubber cultivation and the scope of furtherexpansion of the crop is very much limited.Considering this fact, the expansion of rubbercultivation, which is of prime importance forsetting up rubber production, has to take placemainly in non-traditional areas. Non-traditionalareas so far identified as almost fully ormarginally suitable for rubber cultivation areArunachal Pradesh, Assam, Manipur, lowerreaches of hills of Meghalaya, Mizoram,Nagaland and Tripura excluding the other stateof India. Although the North Eastern Region liesfar outside the traditional rubber growing zone,the agro-climatic conditions obtained here areunique in as much as near tropical features areexperienced in most parts owing to lowelevations, exposure to monsoons and othermoderating influences. Public SectorCorporations set up later joined rubber plantingendeavours on extensive scales. Thus while inAssam and Tripura, Public Sector Corporationsare leading in the rubber plantation sector, inMeghalaya, Manipur, Mizoram and ArunachalPradesh the role has played by the State Forestand Soil Conservation Departments.

Cost EstimationLand & Building (1000 Acres) Rs. 31.22 Cr.Plant & Machinery Rs. 12 LacsW.C. for 3 Months Rs. 30 LacsTotal Capital Investment Rs. 31.71 Cr.Rate of Return 7%Break Even Point 70%********************************************************

To get Loan/Finance from Banks/Finacial Institutes.

To set up your own Industry/Unit

To have Detailed & Exhaustive Data on any Project.

A complete List of Industrial Project Reports are given on www.eiribooksandprojectreports.com

EACH DETAILED PROJECT REPORT CONTAINS:INTRODUCTION : Project Mix, Uses & Applications, Quality Control Measure & Their Introduction for Attaining RequiredProperties Economy & Productivity Competence.

MARKET SURVEY : Market Position, Installed Capacity Production, Anticipated Demand, Present Manufacturers,Statistics of Imports & Exports, Estimated Demand, Demand & Supply Gap (If available), LI/IL Issued Recently

PROCESS OF MANUFACTURE : Inventory Controls & Tests, Comparative Study of Process for Manufacturing theProduct, Formulations, Process Flow Sheet Diagram, Process Detail in Stages from Raw Materials to Finished Products

RAW MATERIALS : Raw Material Specifications, Market Codes & Raw Material Prices, Sources of Procurement ofRaw Materials [Imported/Indigenous]

PLANT & MACHINERY : Range of Machineries Required, Detailed Specifications of Machines & Equipmants, Pricesod Machineries, Suppliers of Plant and Machineries.

LAND & BUILDING : Total Land Area Requirement with Rates, Covered Area Break-up with Estimated Costs ofConstruction

PROJECT ECONOMICS : Land & buildings, Plant, Machinery & Other Fixed Assets, Total Capital Investment, WorkingCapital Assessment, Raw Material & Consumable Stores, Staff Salaries & Wages, Utilities & Overheads, Total Cost ofProject, Sources of Finance/Refinance, Break Even Point Determination.

* EIRI Project Reports are prepared by highly qualified & experienced consultants &Market Research and Analysis supported by a panel of Experts and Computerised.

* Data provided are reliable and uptodate collected from manufacturers/suppliers, plantalready commissioned in India.

EIRI Technocrats and Engineers have just prepared“MARKET SURVEY CUM DETAILED TECHNO ECONOMIC FEASIBILITY REPORTS”

on following lucrative products which are most viable and profitable and having bright future scope

For assessing Market Potential, Corporate Diversifications,Planning, Investment Decision Making and to start your own setup,Entrepreneurs and Industrialists are most welcome to contact EIRI.

* COPPER SULPHATE FROMCOPPER ASH/SCRAPCHELATED ZINC (ZN-EDTA)12%

* ORTHOPAEDIC IMPLANTSAND INSTRUMENTSBARLEY MALT

* MINERAL TURPENTINE OIL(M.T.O.) FROM PETROLEM(SUPERIOR KEROSENE OILOR OTHER MATERIAL)

* M.S.FASTENERS AND S.S.FASTENERS

* P.V.C. COMPOUNDING(FRESH) FOR CABLES ANDPVC PIPES

* BANANA FIBRE EXTRACTIONAND HAND MADE PAPERBANANA & ITS BY

PRODUCTS* COLOUR AND ADDITIVES

MASTERBATCHES* METALLIC STEARATE* SURGICAL METHYLATED

SPIRIT* KHADSARI SUGAR (500 TCD)* COTTON (RUI) FROM WASTE

COTTON CLOTH* LAUNDRY & DRY CLEANERS* COATED YARN* TOUGHENED GLASS* CAUSTIC SODA (SODIUM

HYDROXIDE) (NaoH)ELECTROLYTIC PROCESS

* PLASTIC WASTE RECYCLINGUNIT & PYROLYSIS PLANTFROM PLASTIC AND RUBBERWASTE (INTEGRATED UNIT)

* CHITIN & CHITOSAN FROMPRAWN SHELL WASTE

* PASTA PRODUCTION PLANT(SHORT PASTA)

* SODIUM HYDRO SULFITETHROUGH FORMALDEHYDEROUTE CAP-20 TPD

* SODA ASH PLANT FROMSOLVAY PROCESS

* ONION, AND GARLICPOWDER WITH GRAPEDEHYDRATION (RAISINS)

* FLUSH DOORS* DI-METHYL PHTHALATES

(DMP)* GLUTEN FREE BEER

* PVC AND PP FILES ANDFOLDERS

* SULFAMIC ACID PURECRYSTAL AND OTHER GRADE(GP,SR & TM GRADE)

* DECORATIVE LAMINATEDSHEET (SUNMICA)

* ALPHA CELLULOSE POWDERFROM COTTON WASTE

* CAST POLY PROPYLENEFILMS ( CPP FILM)

* CASHEW NUT PROCESSING* BIOGAS PRODUCTION (1500

CUBIC METER PER DAY)* SOYA MILK AND PANEER* MINERAL TURPENTINE OIL

(MTO)

EIRI is an expertIndustrial Consultantworking over 35 years

and specialized toprepare all types ofDetailed Project

Reports based onclients requirements.Do Contact Today at:

[email protected]



* STEEL FABRICATION* STEEL ROLLING MILL

(REINFORCEMENT BAR)* ACRYLIC BATH TUB BY

ACRYLIC SHEET* FABRICATION OF HEAT

EXCHANGER* KITCHEN PRODUCTS

MADE OF STAINLESS STEEL* ALUMINIUM BEVERAGE CAN* STEEL ROLLING MILL (BY

INDUCTION FURNACE FROMSTEEL SCRAP & SPONGIRON

* M.S. BILLET CASTING WITHINDUCTION FURNACEFROM STEEL SCRAP &SPONGE IRON

* PROCESSING OF LOWGRADE TUNGESTEN OREFULL BODY & CHASSISSBUS PLANT

* ASSEMBLY OF AIR –CONDITIONER/CHESTFREEZER/REFRIGERATOR

* G.I.LADDER & PERFORATEDTRAYS

* ALUMINIUM DOORS &WINDOWS (ALUMINIUMFABRICATION)

* LEAF SPRINGS FORTRACTOR DRAWNTROLLEYS & FOURWHEELER TEMPOS

* STEEL BRIGHT BARS* AUTOMOTIVE ENGINE VALVE* AUTOMOTIVE BRAKING

SYSTEM* DISPLAY COOLER* ERW STEEL PIPES & TUBES* STEEL INGOTS* TMT STEEL BARS (SARIYA)* AUTOMOBILE TRACTORS* ACTIVATED ALUMINA BALLS* ALUMINIUM FOIL* STONEWARE PIPE

(S.W.PIPE)/ CLAY PIPE* IRON ORE PELLETIZATION* ELECTRIC CONTROL PANEL* SOLAR PV POWER PLANT* MACHINE SHOP (FOR OIL

AND GAS ENGINEERINGINDUSTRY, AEROSCAPEENGINEERING INDUSTRY)

* STEEL BRIGHT BARS* CEILING FAN* COPPER STRIP COILS FROM

SCRAPS* PRODUCTION OF PV

PANELS (SOLAR PV PANELS)* ROTARY AIR LOCKS, SCREW

CONVEYOR, MOTORIZED/PNEUMATIC DAMPER, FLAPVALVES, AIR SLIDESREQUIRED IN CEMENTPLANTS AND THERMALPOWER PLANT

* ALUMINIUM EXTRUSION

* ALUMINIUM COIL COATINGFOR ACP AND ROOFING IND.

* PAVING BLOCK* WIRE NAILS* TMT STEEL BARS* FASTENERS/NUT & BOLTS

(INDUSTRIAL &AUTOMOBILE)* HYDRAULIC CYLINDERS* DISPOSABLE SYRINGES

WITH NEEDLE PLANT* FABRICATION UNIT

(PRESSURE VESSEL,REACTOR VESSEL &AGITATORS, HEATEXCHANGERS) & SEAMLESSPIPES AND TUBES

* COPPER POWDER FROMCOPPER SCRAP

* STONE CRUSHER* PRODUCTION OF ALL

TYPES OF FANS SUCH ASAXIAL FANS,CENTRIFUGALFANS (SMOKE EXTRACTFANS & FRESH AIR SUPPLYFANS), BATHROOM FANSETC.

* STONE MINING* MAHINDRA CAR

DEALERSHIP WITHAUTOMOBILE SERVICESTATION/GARAGE

* AUTO FILTERS (AIR FILTERS,OIL FILTERS & FUEL FILTERS)

* AAC & ACSR ALUMINIUMCONDUCTORS

* MANGANESE ORE JIGGING* STEEL TRANSMISSION LINE

TOWERS AND ROLLING MILLTO PRODUCE STEELSECTIONS

* FERRO SILICON (FROMMINERAL INGREDIENTS)STAINLESS STEEL TUBES

* M.S.FASTENERS ANDS.S. FASTENERS

* PREFABRICATED STEELFRAMED BUILDINGMANUFACTURING PLANT

* LEAD ACID BATTERY* GALVANISED WIRE* POWER TRANSFORMER

(50 KVA TO 2000 KVA)* M.S. PIPE* GALVANISED IRON SHEETS* M.S.BILLETS* STEEL GRATING

(GALVANISING ELECTROFORGED STEEL GRATING)

* ALLOY WHEELS PLANT* ESTABLISHMENT OF

MANUFACTURING OFREFRIGERATING APPLIANCE

* WELDED WIRE MESH* ALUMINIUM COLD

ROLLING MILL FORSHEETS & CIRCLES

* ALUMINIUM ROLLINGMILL FOR MANUFACTURINGALUMINIUM CIRCLES

REQUIRED FORPRESSURE COOKERS,NON STICK COOKWARES& CIRCLES

* LPG CYLINDER* ALUMINIUM COMPOSITE

PANNELS* DEEP FREEZER

ENVIRONMENTALCLEARANCE FOREXPANSION OF INGOTS/BILLETS PLANT

* FERRO SILICON BYSMELTING PROCESS

* ALUMINIUM CONDUCTOR* PRESTRESSED

CONCRETE POLES* FASTENERS (NUT & BOLT)

USED IN OIL AND GAS* ALUMINIUM ALLOY PLANT* STAINLESS STEEL SINKS* ALUMINIUM ALLOY PLANT* P.V.C BATTERYSEPARATOR* AUTOMOTIVE TYRE AND

TUBE VALVES (VALVESMANUFACTURING)

* PRESSURE COOKWAREALUMINIUM, STAINLESSSTEEL & HARD ANODIZED

* ELECTRIC WATER HEATER* SOLAR WATER HEATER

DOMESTIC & INDUSTRIAL* CORRUGATED

COLOURED ROOFINGGALVANISED IRON SHEET

* PRESSURE DIE CASTING* G.I.WIRE AND BARBED

WIRE* G.I.WIRE & M.S. BINDING

WIRE* HOT DIP GALVANIZING

PLANT FOR STRUCTURALSTEEL AND PIPES

* COLD ROLLING MILL* DOOR HINGES (MILD

STEEL AND STAINLESSSTEEL)

* PRESSURIZED AEROSOLS(LIKE BODY SPRAYS,PERFUMES, SHAVINGFOAM AND SHAVING

LOTIONS ETC.)* ANHYDROUS SODIUM

DITHIONITE PRODUCTION(SODIUM FORMATEPROCESS)

* SODA ASH PLANT (FROMSOLUTION BRINE)

* SISAL FIBREREINFORCED

* CEMENT ROOFING SHEET* HIGH ALUMINA

REFRACTORY BRICKPLANT

* CATHETERSMANUFACTURING

* SURGICAL RUBBERDISPOSABLE GOODS

* POULTRY AND HATHERYFARMING

* MILK PROCESSING PLANT* ROASTED, SALTED ALMONDS,

PEANUTS FOR PACKING IN25g, 50g,250g & 500g SACHET-S

* BEER FROM POTATOES* GUAR GUM POWDER* AUTOMATIC WHITE BREAD

MAKING PLANT* AUTOMATIC BISCUIT MAKING

PLANT* FROZEN FOOD BY IOF

TECHNOLOGY* WALNUT PROCESSING PLANT* WHIPPING CREAM FRUITS &

VEGETABLES POWDER UNIT(EXPORTS ORIENTED UNIT)

* NATURAL MEDICINE &RESEARCH INSTITUTEWITH 150 BEDS HOSPITAL

* PACKAGED DRINKING WATER(PACKED IN 330 ml CUP, 500MLBOTTLE, 1500 ML BOTTLE AND20 LTR. JAR)

* COLD STORAGE(CONTROLLED ATMOSPHEREOR CA) FOR POTATO CAP:1,00,000 BAGS (50 Kg/Bag),STORING CAP: 5000 Mt,SOLVENT EXTRACTION& REFINING (SOYABEAN) (Cap-250mt/day & 50mt/Day oilRefining)

* BOTTLING PLANT (WHISKY,BRANDY, RUM, VODKS, GIN)FROM RECTIFIED SPIRIT/ENALUBE OIL BLENDING ANDGREASES PLANT

* COLD STORAGE FOR POTATO1,00,000 BAGS (50 KG/BAG)

* MAIZE FLOUR & BY PRODUCTMANUFACTURING PLANT

* CUT FLOWER (GLADIOLI,MARIGOLD, STATICE,CHRYSANTHEMUM ROSEWITH GREEN HOUSE)

* CATTLE FARMING ANDDAIRY PRODUCTS

* COLD STORAGE FORPOTATOAND OTHER HORTICULTUREPRODUCTS Cap:- 5000 Mtor 100000 Bags (50 Kg/Bag)

* DEXTROSE PLANT* SBR RUBBER SHEETS AND

SHOE MANUFACTURING* CASHEW NUT PROCESSING* PLYWOOD AND PLYBOARD

PARTICLE BOARD ANDLAMINATED PARTICLE BOARD

* VENEER MAKING, PLYWOOD& PLYBOARD MAKING

* WALNUT & PINUS(CHILGOZA)OIL, SHELL POWDERPROCESSING PLANT

* COUNTRY LIQUOR BOTTLINGPLANT (1,00,000 BOTTLES/DAY)

Highly Profitable Projects for New Entrepreneurs “EIRI Market Survey Cum Detailed Techno

Economic Feasibility Reports”


* PLASTIC GRANULES FROMPLASTIC WASTE

* ROPE AND SUTLI MAKINGPLANT

* BOTTLING PLANT (COUNTRYLIQUOR) 10,000 LTRS./DAY)

* I.V. FLUID (FFS OR BFSTECHNOLOGY)

* TOXIN PAN MASALA,TOBACCO LESS GUTKHAAND ZARDA

* RUBBER & FLATTRANSMISSION BELTCONVEYOR BELT

* UPVC DOORS & WINDOWSFABRICATING PLANT (Fixingand Installation of Door andWindows of uPVC profiles)

* RUBBER & FLATTRANSMISSION BELTCONVEYOR BELT

* MUSTARD OIL PROCESSINGPLANT (EXPELLER PROCESS)

* MEDICAL COLLEGE WITH750 BEDS HOSPITAL FACILITY

* MICRO IRRIGATIONPRODUCT MANUFACTURINGPLANT

* HOT DIP GALVANIZINGMUSTARD OIL PROCESSINGPLANT (EXPELLER PROCESS)CEMENT TILES, CANAL LINESLAB, KERV STONE, PAYERRCC PIPE, MANOHOLECOVER,ENTERLOCKING ETC.MANUFACTURING PLANT

* MEDICAL COLLEGE (100STUDENT INTAKECAP. MEDICAL COLLEGEWITH 500 BED HOSPITAL)

* ESTABLISHMENT OF APRIVATE UNIVERSITY

* DIGITAL INKS* GALVANIZING PROCESS

PLANT FOR ELECTRICALPOLES

* MAIZE PROCESSING PLANT* STARCHES / MODIFIED

STARCHES/ LIQUID GLUCOSE/ DEXTROSE MONOHYDRATE/GLUCOSE SYRUPS / CORNSYRUP SOLIDS / HIGHMALTOSE CORN SYRUPS /MALTO DEXTRINE POWDER /CORN GLUTEN MEAL (60%)MAIZE OIL / SORBITOL.

* BABY CARE PRODUCTS* FAT LIQUOR (CHLORINATED

PARAFFIN WAX)* BOTTLING OF WHISKY* UPVC DOORS & WINDOWS

PROFILES* EPDM RUBBER PROFILES* FAT LIQUOR (CHLORINATED

PARAFFIN WAX)* FAST FOOD RESTAURANT

WITH CENTRALLISEDKITCHEN

* READY MADE GARMENT(T-SHIRT/POLO GOLFER/WOVEN SHIRTING & SUITINGFOR UNIFORMS/SWEATERS)MANUFACTURING

* BIO-DIESEL EXTRACTIONFROM JATROPHA,SOYABEAN, SUNFLOWER,RICE BRAN, ALGE &CULTIVATION OF JATROPHA

* FAST FOOD RESTAURANTCHAIN WITH CENTRALLISEDKITCHEN

* GUAR SPLIT POWDER ANDOTHER BY PRODUCTS

* SOLVENT EXTRACTIONPLANT (COTTON SEED)

* RASGULLA MANUFACTURINGAND CANNING

* CULTIVATION OF RICE &WHEAT COMMERCIAL &MECHANISED DEVELOPMNT

* MAIZE & BY PRODUCTSPROCESSING -STARCHMODIFIED STARCHES/LIQUIDGLUCOSE/DEXTROSEMONOHYDRATE/GLUCOSESYRUPS/CORN SYRUPSOLIDS/HIGH MALTOSECORN SYRPS/ MAITODEXTRINE POWDER/CORNGLUTEN MEAL (60%) MAIZEOIL/SORBITOL

* TEAK FARMING* ARTIFICIAL MARBLE

(SYNTHETIC)* POTATO STARCH CARDANOL

FROM C.N.S.L. (CASHEWNUTSHELL LIQVID

* INTEGRATED SCRAP YARD* POTATO STARCH* MANGO PULP (5 TON/HOUR

200 KG ASEPTIC PACKAGING)* BOTTLING PLANT (WHISKY,

BRANDY, RUM, VODKA, GIN)FROM RECTIFIED SPIRIT/ENA

* COW DAIRY FARMING(AYRSHIRE/HOLSTEIN) ANDMILK PROCESSING MILK/DAYCAP-50,000 LTR/DAY

* WHEAT FLOUR MILL* CHAKKI FLOUR MILL* I.V. FLUID (FFSTECHNOLOGY)* LIQUID GLUCOSE FROM

POTATOES* SORBITOL FROM MAIZE

STARCH* WALNUT PROCESSINGPLANT* SOLVENT EXTRACTION AND

OIL REFINERY CUM PACKINGOF RICE BRAN OIL

* COTTON SEED OIL SOLVENTEXTRACTION PLANT

* MARINE TRAINING INSTITUTE& PLACEMENT SERVICEPROVIDING AGENCY

* I.V.FLUID (FFS TECHNOLOGY)* CERAMIC FIBERS, CERAMIC

FIBRE BLANKET, CERAMICFIBRE BOARD AND CERAMICFIBRE ROPE

* COLD SUPPLY CHAIN* LAMI TUBE MANUFACTURING* EYE DROP 3 PIECES

(PLASTIC VIALS)* PET BOTTLES (CAMBER/

CLEAR IN COLOUR) CAP:15ML,60ML 100ML,135ML,200ML & 500ML

* BENZYL ALKONIUMCHLORIDE (BKC)

* NATURAL SUGAR WAX* MARGARINE BUTTERFROM

VEGETABLE OIL* GREEN HOUSE FOR CROP

PRODUCTION* ORGANIC DAIRY FARMING* E-WASTE* BIO-DIESEL FROM ALGAE* VANADIUM PENT OXIDE

GRAPHITE MINING ANDBENEFICIATION PLANT

* VITAMIN WATER* PET PREFORM CUM PET

BOTTLES* ORGANIC DAIRY FARMING

AND PRODUCING WHOLEMILK POWDER (WMP)

* HDPE BOTTLES* CAUSTIC SODA FROM

SODIUM CHLORIDE* COAL TAR PITCH* MOSQUITO REPELLANT* WRIST BAND* CASTOR OIL AND ITS

DERIVATIVES OLEO RESIN,TURKEY RED OIL, DCO, HCO,SEBACIC ACID, 12-HYDROXYSTEARIC ACID

* PAPAIN FROM PAPAYA* PROCESSED CHEESE* MONOCHLOROBENZENE* EUGENOL FROM CINNAMON

OIL* SULPHUR 80% WDG* CERAMIC FIBERS,

CERAMIC FIBRE BLANKET,CERAMIC FIBRE BOARDAND CERAMIC FIBRE ROPE

* SCREEN PRINTING* DI CALCIUM PHOSPHATE

FROM ROCK PHOSPHATE& HAIFA PROCESS

* PVC FLEXIBLE PIPE* FLEX BANNER USED IN

DIGITAL PRINTING* PIGMENTS BINDERS FOR

TEXTILE PRINTING* POULTRY & HATCHERY FARM* ALOEVERA JUICE AND GEL* LIME PUTTY* AUTOMOBILE WORKSHOP/

GARAGE* EGG TRAY FROM PULP* CARDANOL FROM C.N.S.L.* OXYGEN GAS

* POLYALUMINIUM CHLORIDE* NAMKEEN INDUSTRY

(BHUJIA, CHANACHUR ETC.)* POLYOL USED FOR

POLYURETHANES* POLYSTYRENE POLY

PROPYLENE OXIDE* DIETHYL PHTHALATE* UREA FORMALDEHYDE AND

MELAMINE* FORMALDEHYDE MOULDING

POWDER* INSTANT COFFEE* ANNATTO SEED COLOUR

EXTRACTION* FRUITS AND VEGETABLES

DRYING BY (FREEZE DRYINGMETHOD)

* BIO GAS PRODUCTION ANDBOTTLING PLANT

* JAM, JELLIES, FRUIT JUICEAND ALLIED PRODUCTSMATERNITY NURSING HOME

* CANNING & PRESERVATIONOF VEGETABLES

* CURCUMIN & TURMERIC OILFROM TURMERICDETERGENT WASHINGPOWDER (ARIEL TYPE)

* GRANITE SLAB AND TILES* TEA PACKAGING* PAN MASALA & GUTKHA* PRESTRESSED CONCRETE

ELECTRIC POLES* LEATHER SHOES* ROTOGRAVURE PRINTING

(FOR FLEXIBLE PACKAGING)* AUTOCLAVED AERATED

CONCRETE BLOCKS* OXYGEN AND NITROGEN

GAS PLANT* MANGANESE ORE

BENEFICATION* MINERAL WOOL* CALCIUM SILICATE* TOUGHENED GLASS* HUMIC ACID* OFFSET PRINTING UNIT

(5 COLOUR)* CASTOR OIL AND ITS

DERIVATIVES OLEORESIN* TISSUE PAPER PULPING

FROM SAW DUST* KNITTED GLOVES* RADIATOR COOLANT* LATEX FOAM RUBBER

(SPONG RUBBER)* GARLIC OIL AND POWDER* ACTIVATED CARBON &

SODIUM SILICATE FROMPADDY/ RICE HUSK

* TRIETHYLENE GLYCOL* RAMMING MASS* WOOD PEELING &

VENEER MAKING* PETROLEUM JELLY* DAIRY FARM (COW &

BUFFALO) TO PRODUCE

Market Survey Cum Detailed Techno Economic Faeasibility Report on all Projects are available contact:ENGINEERS INDIA RESEARCH INSTITUTE

4449, Nai Sarak, Main Road, Delhi - 110 006 (India) * Ph. : +91 9811437895, 9811151047, 91-11-23918117, 23916431, 23947058, 45120361Email: [email protected], [email protected] Website: www.eiriindia.org, www.eiribooksandprojectreports.com


MILK & PACKAGING INPOUCHES

* CUTTING OIL LIQUID GOLD(IN PASTE FORM)

* P.V.C. LEATHER CLOTH(REXINE)

* COAL TAR DISTILLATION* ALUMINIUM LABEL PRINTING* FOLDING CARTNS/MONO

CARTONS* SURGICAL DISPOSABLE

GLOVES (DIPPED RUBBERGOODS)

* AGRICULTURAL CHEMICAL(PLANT GROWTH PROMOTERAND PLANT GROWTHREGULATOR)

* MENTHOL BOLD CRYSTALSFROM MENTHOL FLAKES

* ORGANIC FARMING* CORRUGATED

POLYCARBONATE SHEET* COLD STORAGE* FLAT PVC LAMINATED* SAFTY GLASS/TOUGHENED

GLASS* PLASTIC GRANULES FROM

WASTE* DRY WALL PUTTY (WHITE

CEMENT BASED)* CHARCOAL BRIQUETTE* OXALIC ACID FROM

MOLASSES* POTATO GRANULES* SANITARY NAPKINS & BABY

DIAPERS* CORRUGATED BOXES* PLASTER OF PARIS* RUBBER ROLLER FOR

PRINTING MACHINE* LACTIC ACID* EMERY PAPER (SAND PAPER)* RUBBER RECLAIM SHEET

FROM USED BUTYL TYREAND TUBE

* MANGO PULP* PARTICLE BOARD FROM

BAGASSE AND RICE HUSK* TOILET PAPER & NAPKINS* TENDER COCONUT WATER* CALCIUM CARBONATE* LIME CALCINATION PLANT* INJECTION MOULDED

PLASTIC COMPONENTS* HYDRATED LIME* BLACK PEPPER* MULTIAXIAL GLASS FABRIC* LIQUID TOILET CLEANER

(HARPIC TYPE)* LIME & PRECIPITATED* CALCIUM CARBONATE* LIQUID GLUCOSE FROM

BROKEN RICE

* MEDICAL DISPOSABLEPLASTIC SYRINGES

* METAL POLISHING BAR* SANITARY NAPKINS & BABY

DIAPERS* PERFUMES/ATTAR* GEMS AND JEWELLERY* MULTIAXIAL GLASS FABRIC* ACTIVE ZINC OXIDE* COPPER PHTHALOCYANINE* TURMERIC OIL EXTRACTION

FROM DRY TURMERIC* CNSL BASED RESIN IN

LIQUID & POWDER FORMBOPP FILM

* BETA IONONE* BIO-FERTILIZER* ZINC & COPPER SULPHATE* PAPER BASED PHENOLIC

SHEET (FOR ELECTRICALAPPLIANCE)

* THINNERS (WHITE SPIRITBASED)

* SINGLE SUPER PHOSPHATE& SULPHURIC ACID

* MONO CALCIUM PHOSPHATE& DI-CALCIUM PHOSPHATE

* FLEXIBLE P.U. FOAM* ASPIRIN* SORBITOL FROM MAIZE

STARCH* SPICE OIL & OLEORESIN* ANTI-FOAMING AGENT

(SILICONE BASED) FORDISTILLERY, SUGAR, PAPERPLANT ETC.

* LAUNDRY & DRY CLEANER* BRICKS FROM STONE DUST* CARBOXY METHYL STARCH* TITANIUM DIOXIDE* UNDECYENIC ACID* PSA BASED NITROGEN

GENERATOR* SYNTHETIC IRON OXIDE* PVC INSULATION TAPE* TAMARIND KERNEL POWDER* ORGANIC CHEMICAL &

SOLVENTS* PLASTICIZERS* ICE PACK (SOLUTIONS

TYPE, VIOLET-SEMI SOLIDPOLYMER TYPE)

* GUM FROM TAMARIND* PEARL SUGAR CANDY

(MISHRI)* GOAT & SHEEP FARMING* GYPSUM PLASTIC BOARD

(AUTOMATIC PLANT)* NON-WOVEN INDUSTRY

(CARRY BAGS, SURGICALGOWN, FACE MASK, ROUNDCAPS, SHOE COVER, GLOVE)

* COTTON SPINNING, SIZING,

YARN, DYEING & WEAVING* CALCIUM CHLORIDE* AMINES & ALLIED PRODUCT* SPINNING COTTON* SILICONE FROM RICE HUSK* ADHESIVE (FEVICOL TYPE)* CAUSTIC SODA FROM

ELECTROLYSIS* CAMPHOR TABLETS* CERAMIC GLAZED WALL

AND FLOOR TILES* ZINC SULPHATE MONO* ETHANOL (BIO FUEL)

FROM RICE STRAW* GYPSUM MOULDING AND

GYPSUM BOARD* SMOKELESS COAL* ACID (SILICA) AND BASIC

RAMMING MASS* UNSATURATED

POLYESTER RESINS* DAIRY (BUFFALO) FARMING

SILICONE FROM RICE HUSK* N-ACETYL THIOZOLIDINE-

4-CARBOXYLIC ACID (NATCA)* PE BASED CARBON BLACK

COMPOUND* ONION DEHYDRATION* PVC PIPES & FITTING* GLASS REINFORCED* GYPSUM MOULDINGS

ABSORBENT COTTON &SURGICAL BANDAGES

* CALCIUM STEARATE BYFUSION PROCESS

* MANGO POWDER & OTHERFREEZE DRIED PRODUCTS

* MENTHOL OIL FROMLEAVES AND MENTHOL

* CRYSTALS (PEPPERMINT)MANUFACTURE OFCELLULOSE ACETATE

* ANTIFOAMING /DEFOAMING AGENT

* ALOEVERA CULTIVATION &PROCESSING

* SYNTHETIC MAGNESIUMSILICATES

* EPHEDRINEHYDROCHLORIDE

* ACTIVATED BLEACHNGEARTH

* TECHNICAL TEXTILES* FORMALIN FROM

METHANOL* CATIONIC SOFTNER

(STEARIC ACID BASED)* PRECIPITATED SILICA* PU BASED FOOT WEARS* FORMALDEHYDE RESIN

(UREA, PHENOL, MELAMINE)* HDPE MONO FILAMEN NET* POTATO & ONION FLAKES

* DUSTLESS CHALK(SCHOOL CHALK)

* TOMATO POWDER* BIODEGRADABLE /

COMPOSTABLE PLASTICS* ACRYLIC CO POLYMER

EMULSION* ESTER GUM (FOOD GRADE)* PROTEIN BASED FOAMING

AGENT* LECITHIN (SOYA BASED)* SOYA OIL AND CATTLE

FEED FROM SOYABEAN

* COMPARISON BETWEENFLY ASH AND CELLULARLIGHTWEIGHT CONCRETE(CLC) BRICKS

* CELL CAST ACRYLICSHEET

* ACRYLIC BATH TUB ANDSHOWER TRAY

* THERMOCOLE BASEDDISPOSABLE PLATES

* SODIUM SILICATE FROMRICE HUSK

* ETHYL METHACRYLATE* SODIUM LAURYL ETHER

SULPHATE* LATEX GLOVES,

CONDOMS & CATHETER* CALCIUM NITRATE

GRAIN BASED ALCOHOLDISTILLERY

* BULK DRUGS* MARBLE QUARRYING* CULTIVATION OF

CAPSICUM IN GREENHOUSE

* SULPHUR 90% WDG* EGG POWDER* WOOD PLASTIC* COMPOSITE BOARD LINE* SODIUM LAURYL SULPHATE

AND SODIUM LAURYLETHER SULPHATE

* FISH PROCESSING* BABY CEREAL FOOD & MILK

POWDERS (BABY FOOD)* GUR (JAGGERY)* DAIRY PRODUCTS* CHLORINATED PARAFFIN

WAX (CPW)* HAND WASHING

DETERGENT POWDERUSING THE DRY MIXPROCESS INCLUDINGFORMULA OF DIFFERENTTYPES QUALITIES (LOW/MEDIUM/HIGH COST)

* HANDWASHING DETERGENTPOWDER USING THE DRYMIX PROCESS INCLUDING

Market Survey Cum Detailed Techno Economic Faeasibility Report on all Projects are available contact:ENGINEERS INDIA RESEARCH INSTITUTE

4449, Nai Sarak, Main Road, Delhi - 110 006 (India) * Ph. : +91 9811437895, 9811151047, 91-11-23918117, 23916431, 23947058, 45120361Email: [email protected], [email protected] Website: www.eiriindia.org, www.eiribooksandprojectreports.com

Highly Profitable Projects for New Entrepreneurs “EIRI Market Survey Cum Detailed Techno

Economic Feasibility Reports”

TERMS AND CONDITIONS

Ask for the quotation for the required project report [email protected] or [email protected]

Mob: +91 9811437895 or +91 9811151047

Regd. Off : 4449, Nai Sarak, Main Road, Delhi - 110 006 (India)* Ph: +91 9811437895, 9811151047, 91-11-23918117, 23916431,

45120361, 23947058, 64727385* E-Mail : [email protected], [email protected]

* Website: www.eiriindia.org, www.eiribooksandprojectreports.com

Deposit the amount in “EIRI “Account with HDFC BANK CA-05532020001279 (RTGS/NEFT/IFSC CODE: HDFC00001981) OR ICICI

BANK CA - 038705000994 (RTGS/IFSC CODE: ICIC0000387) ORAXIS Bank Ltd. CA- 054010200006248 (RTGS/IFSCCODE:UTIB0000054) OR UNION BAK OF INDIA CA-

307201010015149 (RTGS/NEFT/IFSC CODE: UBIN0530727) ORSTATE BANK OF INDIA CA-30408535340 (RTGS/IFSC CODE:

SBIN0001273) & SMS ON PH. 09811437895

FORMULA OF DIFFERENTTYPES QUALITIES (LOW/MEDIUM/HIGH COST)

* DIGITAL PHOTOPAPER/INKJET PHOTOPAPER

* KAOLIN FOR ROAD MAKING* PEPPERMINT CULTIVATION &

PROCESSING* PEPPERMINT CULTIVATION &

PROCESSING* HDPE PIPE* ACTIVATED CARBON FROM

RICE HUSK* HT & LT INSULATOR, HT AIR

BRAKE SWITCH D.O. FUSE,LIGHTENING ARRESTOR

* PET BOTTLES IN CAP: 500ML,1 LTR, 2 LTRS, 5 LTRS, USEDFOR PACKAGED DRINKINGWATER, EDIBLE OILS

* ALCOHOLIC BEVERAGES(COUNTRY LIQUOR & IMFL)

* QUARTZ BASED INDUSTRIES(QUARTZ POWDER SILICASAND SILICA RAMMINGMASS FUSED SILICA)

* BEEDI (BIDI) BY MACHINE* RICE SHELLER* FRUIT RIPENING CHAMBER* MINERAL WATER AND PET

BOTTLING PLANT* DIAGNOSTIC LAB AND* ONLINE TRADING BUSINESS* CEREAL MILLING* MINI OIL PLANT SUITABLE

FOR GROUNDNUT OIL ANDCOTTON SEED OIL

* CHANACHUR, BHUJIA,GANTHIA (AUTOMATICPLANT)

* KHADYA SURAKSHA (FOODSECURITY)

* PLASTIC WATER STORAGETANKS

* ZINC SULPHATE,MONOHYDRATE & HEPTAHYDRATE

* CIGARETTEMANUFACTURING UNIT

* CATTLE FEED PELLETSPLANT FOR COW &BUFFALOE FOR BOOSTINGMILK AND GROWTHTYRE RECYCLING UNIT

* PAPAIN EXTRACTIONINDUSTRY

* CAKE SHOP* BUSINESS PROCESS

OUTSOURCE (B.P.O.)* EMPTY HARD GELATINE

CAPSULES* BIOFERTILIZER* PLASTIC MOULDING UNIT

(CHAIR, TABLES &VEGETABLE TRAYS)

* GOLD POTASSIUM CYANIDE(G.P.C.)

* HDPE, PVC & CPVC PIPESAND FITTINGS

* NO CARB PASTE(ANTICARBURIZING PASTE-WATER SOLUBLE) FOR HEATTREATMENT

* CONVERSION WASTEPLASTIC WITH TYRE INTOACTIVATED CARBON ANDINDUSTRIAL FUEL

* PYROLYSIS PLANT FROMPLASTIC & RUBBER

* COMPARISON BETWEEN FLYASH AND CELLULARLIGHTWEIGHT CONCRETE(CLC) BRICKS

* AGAR AGAR* NAIL POLISH* PLASTIC GRANULES FROM

WASTE* AGARBATTI SYNTHETIC

PERFUMERY COMPOUNDS &AGARBATTI COMPOUNDSLIKE (CHAMPA, MOGRA,SANDAL WOOD & LOBAN)

* PET PREFORM AND PETJARS (20 LTRS CAPACITY)

* KRAFT PAPER FROM 100%WASTE PAPER

* PRIVATE UNIVERSITY* LIQUID GLUCOSE AND

MALTODEXTRIN FROMBROKEN RICE

* DRY WALL PUTTY (WHITECEMENT BASED)

* CONSTRUCTION CHEMICALSOT PASTE

* FUSED SILICA FROM SILICASAND

* BANANA CHIPS, BANANAPULP & BANANA POWDER(BANANA PRODUCTS)

* CONFECTIONERY UNIT(TOFFEE, CANDY /LOLLIPOPCHEWING GUM, BUBBLEGUM CHOCOLATE)

* FORMALDEHYDE RESIN(UREA, PHENOL, MELAMINE& THEIR MODIFIED RESINS)

* EPDM RUBBER PROFILES(WEATHER STRIPS,INDUSTRIAL MONOSTRIPSETC)

* GRANITE CUTTING ANDPOLISHING UNIT (100% EOU)

* SURGICAL COTTON, ROLLERBANDAGE, CREPE BANDAGE& PLASTER CART (READYMADE) E.G. GYPSONA 3MCART

* ENTERTAINMENT CLUB,HOLIDAY RESORT, 4 STARHOTEL, AMUSEMENT PARKCUM WATER PARK,MUSHROOM & ITSPRODUCTS, FISH FARMING,LAKE FOR BOATING, DEERPARK ETC.

* HDPE, PVC, LLDPE PIPES/TUBES AND FITTING

* EPOXIDIZED SOYABEAN OIL(SECONDARY PLASTICIZER)USED IN PVC COMPOUND

* POULTRY PROCESSINGPLANT

* B.O.P.P. SELF ADHESIVETAPES

* I.V.SET* MANGANESE OXIDE AND

MANGANESE SULPHATE* ODOURLESS NYLON

GRANULES FROM FIBER OFWASTE TYRE WITHOUTCHANGING PROPERTIES OFNYLON

* PARTICLE BOARD FROM RICEHUSK OR WOOD WASTE ORSUGAR CANE BAGASSE ORMIXED OF ALL ABOVEPOULTRY LAYER ANDBROILER FARMING

* TOMATO, GUAVA AND MANGOPULP

* GREEN HOUSE* HYDROXY PROPYL GUAR

(HPG) AND CARBOXYMETHYL HYDROXY PROPYLGUAR

* BATHSOAP MANUFACTURE* PLASTIC MOULDED CHAIRS

FROZEN POTATO PATTY* CALCIUM ALUMINATE* ACTIVATED CARBON FROM

COCONUT SHELL* RIGID PVC FILM

MANUFACTURE FORPHARMACEUTICALS BLISTER

PACKAGING* NYLONE 66 CURING TAPE

USED IN RUBBER HOSE PIPEWRAPPING

* ANTIFOAMING/DEFOAMINGAGENT LIKE ANTAROL T-709

* SOY AND GLUTEN BASEDMOCK MEAT

* KRAFT PAPER USING WASTEPAPER AND OLDCORRUGATED CARTONS

* GLASS BOTTLE FOR BEERAND BEER MUG (TUMBLER)

* DISPOSABLE SYRINGES ANDNEEDLE PLANT (Single UseSyringes, Single Use Needles &As Syringes)

* DIRECT FILLED BALL PEN(USE AND THROW)

* BENZALKONIUM CHLORIDE* SPINNING COTTON (COTTON

SPINNING PLANT)* CALCIUM CHLORIDE USING

LIME STONE ANDHYDROCHLORIC ACID

* RUBBER POWDER FROMWASTE TYRES

* CALCINATION PLANT FORPYROPHYLLITE ANDDIASPORE MINERALS BYVERTICAL SHAFT KILNPROCESS

* ONION, GARLIC & GINGERDEHYDRATION PLANT

* POTASSIUM NITRATE* POTASSIUM SULPHATE* N.P.K. FERTILIZER* CHICORY EXTRACT

(ROASTED CHICORYGRANULES/CUBES, LIQUIDEXTRACT ETC.)

* SOLID WASTE SEGREGATION* LAMITUBE MANUFACTURE* BOARDING SCHOOL* CERAMIC FUSE TUBE/

BARRELS USED IN HRC FUSE* SODIUM POLYACRYLATE

DISPERSANT FOR USE INWATER BASED PAINT WITHDISPERSANT FOR PIGMENT

* NAIL POLISH, LIPSTICKS,NAIL POLISH REMOVER

* SOYA PRODUCTS (MILK,PANEER, TOFU, BUTTER,CHEESE CURD/YOGURT, ICECREAM) WITH PACKAGINGUNIT

* GREASE MANUFACTURING


Name of Books Rs. US$ Name of Books Rs. US$N Name of Books Rs. US$

CHEMICALS, DYES, LUBRICATINGOILS, PETRO CHEMICALS

ELECTROPLATING

AVAILABLE PROCESS TECHNOLOGY BOOKS AT www.eiriindia.org

* Small Medium & LargeChemical Industries

* Industrial ChemicalsTechnology Hand Book

* Modern Technology ofOrganic & InorganicChemicals

* Electroplating, Anodizing &Surface Finishing Technology

* Hand Book of Agro ChemicalIndust.(Insecticide & Pesticide)

* Technology of Synthetic Dyes,Pigments Intermediates

* Petrochemicals, Lubricants,Greases & Petroleum Refining

* H.B.of Lubricants, Greases &Petrochemicals Technology

* Technology of Gums, Adhesives& Sealants with Formulations

* Hand Book of Adhesiveswith their Formulae (2nd Edn.)

* Adhesives Technology &Formulations Hand Book

* Technology of Glue &Adhesives with AdhesivesBonding and Formulations

* Complete Hand Book onAdhesives and AdhesionTech. with Project Profiles

* Start Your Own ExportBusiness (How To Export)

* Start Your Own SmallBusiness and Industry

* Candle Making Processes &Formulations Hand-Book

* Stationery, Paper Converting& Packaging Industries

* Modern Inks Formulaes &Manufacturing Industries

* Profitable Businesses toStart for Entrepreneurs

* Modern Small & CottageScale Industries

* Profitable Small Cottage Tiny& Home Industries (2nd Edn.)

* Technology of Bio-Fuel(Ethanol & Biodiesel)

* Mod. Tech. of Bioprocessing* ModTech.of BioGas Production

GUMS, ADHESIVES & SEALANTS

BIO FUEL, BIO GAS &BIOPROCESSING

* Tech of Sweets (Mithai)withFormulae

* Technology of Sweets (Mithai),Namkeen and Snacks Foodwith Formulae

* Mfr. of Snacks Food, Namkeen,Pappad & Potato Products

* Technology of Water andPackaged Drinking Water

PACKAGED DRINKING WATER

PRINTING & PACKAGING* Complete Hand Book on Packaging

Technology & Industries* Printing Processes Tech. & Indt.* Hand Book of Printing Technology

(Offset, Screen, Flexo, Gravure,Inkjet & Digital)

* Hand Book of Offset PrintingTechnology

* Screen Printing withProcesses & Technology

* Hand Book of Prepress* Hand Book of Packaging Indus* Modern Packaging Technology

for Processing Food, Bakery,Snack Foods, Spices andAllied Food Products

* Hand Book of Food PackagingTechnology

* Modern Tech. of Printing Inks* Hand Book of Packaging

Technoloy

* Paint Pigment Varnish &Lacquer Manufacturing

* Paint Varnish Solvents& Coating Technology

* Paint, Pigment, Solvent,Coating, Emulsion, PaintAdditives & Formulations

* Technology of Coatings, Resins,Pigments & Inks Industries

* Mfg. Tech. & Formulations H.B.on Thinners, Putty, Wall & Indu.Finishes & Synthetic Resins

* Technology of SyntheticResins & Emulsion Polymers

* Technology of Paints andCoatings with Formulations

* Powder Coating Technology

* Moulds Design & ProcessingHand Book

* Hand Book of Plastic Materials& Processing Technology

* Injection Moulding of Plastics* Plastic Processing &

Packaging Industries* Plastic Waste Recycling Tech.* Technology of Plastic Films* Rotational Moulding Technology

HandBook* Plastic Compounding, Master

Batches, PET & Other Plastics* Synthetic Resins Technology

with Formulations

* Technology of PVC Compounding& Its Applications

* Polymer & Plastic Technology* H.B. of Fibre Glass Moulding* Techn. of Reinforced Plastics* Plastic Additives Technology* Technology of PET Bottles,

Preform and PET Recycling* Modern Technology of

Extrusion & Extruded Products* Technology of Synthetic

Resins & Emulsion Polymers* Technology of Plastic Additives

with Processes and Packaging* Complete Technology Book On

Identification Of Plastics AndPlastic Products Materials(Additives, Applications,Biodegradation, Biomedical,Bulk Moulding Compound,Chemical Analysis, Xlpe, DripIrrigation, Expanded Polyethylene,Polystyrene & Hdpe)

* Identification Of Plastics AndOther Plastic Process Industries(Polystyrene, Nylon, ThermoplasticElastomer, Alkyd Resin,Polypropylene Plastics, MelamineFormaldehyde Resins, Abs, PlasticBlends, Polyvinylidene ChloridePlastics, Polymer, Pipes)

* Complete Technology BookOf Plastic Processing AndRecycling Of Plastics WithProject Profiles

* Modern Technology OfInjection Moulding, BlowMoulding, Plastic Extrusion,Pet And Other Plastics

* Technology of Biscuits, Rusks,Crackers & Cookies withFormulations (Wafer Biscuits,Cream Sandwich Biscuits, OatCereal Biscuits, Low SugarBiscuits, High Fibre Biscuits,Herbal Biscuits, Dog Biscuitsand other Biscuits)

* Hand Book of Confectionerywith Formulations

* Breakfast, Dietary Food, Pasta& Cereal Products Technology

* Hand Book of Modern BakeryProducts (2nd Edn.)

* Modern Bakery Technology &Fermented Cereal Productswith Formulae

* Technology of Confectionery,Chocolates, Toffee, Candy,Chewing & Bubble Gums,Lollipop and Jelly Productswith Formulations

* Hand Book of Bakery Industries

* Start Your Own Wheat Flour Mill (Atta, Maida, Suji, Bran & Besan)

PAINT, VARNISH, SOLVENTS,POWDER COATING & LACQUERS

PLASTIC/POLYMER PROCESSING,COMPOUNDING, INJECTION

MOULDING, ROTATIONALMOULDING, PLASTIC FILM, FIBRE

GLASS, PLASTIC WASTERECYCLING, MOULDS, PET &

RESINS, ADDITIVES INDUSTRIES

BAKERY, CONFECTIONERY,BISCUITS, COOKIES,

BREAKFAST, PASTA & CEREALS

FLOUR MILL (ATTA MAIDA, SUJI)

SMALL SCALE INDUSTRIES,STATIONERY, PAPER, INKS,

CANDLES & EXPORT BUSINESS

SWEETS, NAMKEEN & SNACK FOOD

LIST OF PUBLICATIONS/BOOKS PUBLISHED BY: ENGINEERS INDIARESEARCH INSTITUTE 4449, NAI SARAK, MAIN ROAD, DELHI - 6 (INDIA)

Name of Books Rs. US$ Name of Books Rs. US$

* Poultry Farm & Feed Formulae* Hand Book of Pig Farming* Agro Based H.B. of Plantation,

Cultivation & Farming* Agro-Based Plantation

Cultivation & Farming* Agro Chemical Industries

(Insecticide & Pesticides)* Modern Bee Keeping & Honey

Processing* Technology of Modern Rice

Milling and Basmati Rice* Hand Book of Goat Farming* Floriculture Hand Book

(Flowers Growing Technology)* Aloe Vera Cultivation,

Processings, Formulations andManufacturing Technology

* Dairy Formulations, Processes &Milk Processing Industries

* Milk Processing and DairyProducts Industries

* Dairy Farming to Produce Milkwith Packaging

* Hand Book of Ice CreamTechnology and Formulae

* Hand Book of Milk Processing,Dairy Products and PackagingTechnology

* Dairy Farming for MilkProduction Technology

* Commercial Dairy Farmingwith Project Profiles

* Herbs, Medicinal & AromaticPlants Cultivation

* Aushidhi and SungndhitPaudho Ka Vaysayik (Hindi)

* Aromatic & Medicinal Plantsand Biodiesel (Jatropha)

* Hand Book of Medicinal &Aromatic Plants

* Fruits & Vegetable ProcessingHand Book (2nd Edn.)

* Fruit Beverage & Processingwith Mango

* Food Processing & AgroBased Industries (2nd Edn.)

* Preservation & Canning ofFruits and Vegetables

* Hand Book of FoodDehydration & Drying

* Meat Processing & MeatProducts Hand Book

N Name of Books Rs. US$

AGRO CULTIVATION, ANIMALFARMING, AGRO PLANTATION &AGRO CHEMICAL/PESTICIDES/

FLORICULTURE & BEE KEEPING

HERBS CULTIVATION/MEDICINES

FOOD & AGRO PROCESS, TOMATOPROCESSING, PRESERVATION,

DEHYDRATION, FRUIT BEVERAGE,POTATO, MAIZE, MEAT, BANANA

* Technology of FoodPreservation & Processing

* Food Packaging Technology* Agro Based & Processed

Food Products* Potato & Potato Processing

Technology* Technology of Maize

& Allied Corn Products* Technology of Food

Processing Industries* Complete Book on Banana

Cultivation, DehydrationRipening, Processing,Products & Packaging Tech

* Agro Food Processingand Packaging Technology

* Modern Tech. of TomatoProcessing & Dehydration(Ketchup, Juice, Paste, Soup& Drying)

* Technology of FoodChemicals, Pigments& Food Aroma Compd.

* Modern Technology of AgroProcessing & Food PackagingProducts with ProjectProfiles

* Technology of Chicken Meatand Poultry Products

* Poultry Farming, Hatchery &Broiler Production

* Poultry Farm & Feed Formulae

* Modern Technology of Wood,Veneer, Plywood, ParticleBoard, Fibreboard, Bamboo& Forest Products

* Household Soap,ToiletSoap & Other Soap

* Profitable Small Scale Mfr.of Soaps & Detergents

* Synthetic Detergents withFormulations (2nd Edn.)

* Modern Technology of AcidSlurry, Surfactants, Soap andDetergents with Formulae

* Complete Technology Book onDetergents with Formulations(Detergent Cake, DishwashingDetergents, Liquid &PasteDetergents, Enzyme Detergents,Cleaning Powder & SprayDried Washing Powder)

* Manufacture of WashingSoap, Toilet Soap, DetergentPowders, Liquid Soap & HerbalDetergents and Perfumes withFormulations

POULTRY FARM, HATCHERY &CHICKEN MEAT TECHNOLOGY

WOOD, PLYWOOD, PARTICLE,BOARD, BAMBOO & FOREST

SOAP, DETERGENT & ACID SLURRY

COSMETICS TECHNOLOGY(SYNTHETIC & HERBAL)

* Cosmetics Processes &Formulations Hand Book

* Herbal Cosmetics & BeautyProducts with Formulations

* Profitable Small ScaleManufacture of Cosmetics(Synthetic & Herbal)

* Hand Book of Synthetic &Herbal Cosmetics

* Technology of HerbalCosmetics & ToiletriesProducts with Formulae

* Hand Book of Oils, Fats andDerivatives with Refining &Packaging Technology

* Technology of OilseedsProcessing, Oils & Fatsand Refining

* Essential Oils Manufacturing& Aromatic Plants

* Modern Technology ofEssential Oils

* Technology of Perfumes,Flavours & Essential Oils

* Essential Oils Processes& Formulations

* Hand Book of Flavours &Food Colourants Technology

* H. B. of Perfumes & Flavours* Hand Book of Perfumes

with Formulations (2nd Edn.)* Technology of Perfumes,

Flavours & Essential Oils* H.B. of Flavours Technology

* Technology Of Solar Pv Panels,Energy, Cells, Lantern, Cooler,Light System, Cfl Inverter,Photovoltaic System, PowerPlant, Water Heater, Collector,Solar Cooling, Refrigeration,Solar Drying, Tractor, HomeSystem, Dish Engine,Nanotechnology & Other SolarProducts Manufacturing

* Technology of Building Materials& Chemicals with Processes

* Mod. Tech. of Bleaching, Dyeing,Printing & Finishing of Textiles

* Technology of Textiles (Spinning& Weaving, Dyeing, Scouring,Drying, Printing and Bleaching)

* Garments Manufacturing Tech.

* H.B.of Pulp & Paper, PaperBoard & Paper Based Tech.

OILSEEDS AND FATS

ESSENTIAL OILS & AROMATIC

PERFUMES AND FLAVOURS

SOLAR PV PANELS, ENERGY

BUILDING MATERIAL & CHEMICALS

TEXTILE, GARMENTS, DYEING...

DAIRY FARM, MILK PROCESSINGAND ICE CREAM

PULP & PAPER TECHNOLOGY

LIST OF PUBLICATIONS/BOOKS PUBLISHED BY: ENGINEERS INDIARESEARCH INSTITUTE 4449, NAI SARAK, MAIN ROAD, DELHI - 6 (INDIA)

Name of Books Rs. US$ N Name of Books Rs. US$

* Technology of Spices andSeasoning of Spices withFormulae

* Spices &Packaging with Formula* Start Your Own Cold Storage Unit

* Complete Tech. of NonwovensFabrics, CarryBags, Composite,Geotextiles, Medical Textiles,Fibres, Felts, Apparels, Spunlaceand Absorbent Nonwoven

* Pharmaceuticals and DrugsTechnology withFormulations

* Hand Book of Leather &Leather Products Technology

* Hand Book of Biotechnology

* H.B.of Ceramics & CeramicsProcessing Technology

* Hand Book of Tree Farming

* Hand Book of MushroomCultivation, Processing& Packaging

* Biofertilizers & Vermiculture

* Modern Technology ofBiodegradable Plastics andPolymers With Processes(Bio-Plastic, Starch Plastics,Cellulose Polymers & others)

* Production of BiodegradablePlastics and BioplasticsTechnology

* Complete Hand Book onFrozen Food Processing& Freeze Drying Technology

* Modern Technology ofFrozen Food Products

* Hand Book of Minerals andMinerals Based Industries

* Hand Book of Organic Farmingand Organic Foods with Vermi-Composting & Neem Product

* Hand Book of Fish Farmingand Fishery Products

* Textile Auxiliaries andChemicals with Processes& Formulations

* Technology of TextileChemicals withFormulations

* Modern Technology of TextileAuxiliary and chemicalswith formulations

* Textile Processing Chemicals,Enzymes, Dye Fixing Agentsand Other Finishes withProject Profiles

* Manufacture of Disinfectants,Cleaners, Phenly, Repellents,Deodorants, DishwashingDetergents & Aerosols withFormulations

* Start Your Own Coffee &Coffee Processing

* Complete Book on OnionCultivation, Dehydration,Flakes, Powder, Processingand Packaging Technology

N Name of Books Rs. US$

Send Draft in favour of "Engineers India Research Institute" (Postage Rs. 100/- Extra)

NON WOVEN TECHNOLOGY

SPICES, SEASONING& COLD STORAGE

PHARMACEUTICALS & DRUGS

LEATHER &LEATHER PRODUCTS

BIOTECHNOLOGY

CERAMICS & CERAMIC PROCESS

TREE FARMING

MUSHROOM PROCESSING

BIOFERTILIZERS & VERMICULTURE

BIODEGRADABLE PLASTICSAND POLYMERS

FROZEN FOODAND FREEZE DRYING

RUBBER CHEMICALS, COMPOUNDS& RUBBER INDUSTRIES

AYURVEDIC MEDICINES

* Rubber Chemicals &Processing Industries

* Modern Rubber Chemicals,Compounds & RubberGoods Technology

* Technology of Rubber &Rubber Goods Industries

* Ayurvedic & HerbalMedicines with Formulaes

* Hand Book of AyurvedicMedicines with Formulations

* Modern Technology of NonFerrous Metals and MetalExtraction

* Processing Technology ofSteels and Stainless Steels

* Modern Technology ofRolling Mill, Billets, SteelWire, Galvanized Sheet,Forging & Castings

* Manufacturing Technology ofNon-Ferrous Metal Products

* Modern Technology of FoodAdditives, Sweeteners andFood Emulsifiers

* Technology of FoodChemicals, Pigments andFood Aroma Compounds

* Technology of DisposableMedical Products

* Technology of Soya Milk, Tofu,Hydrolyzate, Allied SoyabeanProducts with project Profiles

* Technology of SOYBEANProducts with Formulae

* Technology of Products fromWastes (Industrial, Agriculture,Medical, Municipality, Organic& Biological) By Panda

* Products from WasteTechnology Hand Book

* Technology of WineProduction and Packaging

* Casting Technology H.Book

STAINLESS STEEL, NON FERROUSMETALS, BILLETS & ROLLING MILL

FOOD ADDITIVES/CHEMICALS ANDSWEETENERS & FOOD EMULSIFIERS

DISPOSABLE MEDICAL PRODUCTS

SOYA MILK, TOFU & SOY PRODUCTS

PRODUCTS FROM WASTE

WINE PRODUCTION

ORGANIC FARMING & FOOD/NEEM

FISH FARMING & FISHERY PRODUCTS

TEXTILE AUXILIARY & CHEMICALS

DISINFECTANTS, CLEANERS,PHENYL, DEODORANTS,

DISHWASHING DETERGENTS ETC.

COFFEE & COFFEE PROCESSING

CASTING TECHNOLOGY

ONION CULTIVATION,DEHYDRATION, POWDER

PROCESSING & PACKAGING

MINERAL AND MINERALS

Regd. Off : 4449, Nai Sarak, Main Road, Delhi - 110 006 (India)

* Ph: +91 9811437895, 9811151047,91-11-23918117, 23916431,

45120361, 23947058, 64727385* E-Mail : [email protected],

[email protected]* Website: www.eiriindia.org,

www.industrialprojects.inDeposit the amount in “EIRI

“Account with HDFC BANK -05532020001279 (RTGS/NEFT/

IFSC CODE: HDFC0001981) ORICICI BANK - 038705000994(RTGS/NEFT/IFSC CODE:

ICIC0000387)

JUST PREPARED NEW PROJECTS FOR YOU...Hi-Tech Projects,Mar’16, # 03 Patrons, deposit amount in EIRI...

Documents

Transcript of JUST PREPARED NEW PROJECTS FOR YOU...Hi-Tech Projects,Mar’16, # 03 Patrons, deposit amount in EIRI...