Juniper certification JN0-340 practice exam
description
Transcript of Juniper certification JN0-340 practice exam
www.killtest.com
JN0-340 Practice Exam
Juniper Networks Certified Internet Associate,
J-series (JNCIA-J)
http://www.killtest.com/JNCIA/JN0-340.asp
Killtest Juniper certification JN0-340 practice exam is created by top seniors and
experts, who cracked our all the Juniper JN0-340 real exam questions and
answers according to the Juniper JN0-340 exam information and objectives.
With Killtest Juniper certification JN0-340 practice exam, we can ensure your
success absolutely.
Killtest JN0-340 practice exam features:
Comprehensive questions with complete details about JN0-340 exam
JN0-340 exam questions accompanied by exhibits
JN0-340 exam questions are updated on regular basis
Tested by many Juniper Certified Specialist exams before published
100% Money Back Guarantee if failed
Try JN0-340 free demo before purchasing it
JN0-340, as a famous topic of Juniper certification, becomes more and more hot
and popular, then more and more candidates come for the Juniper JN0-340
success. Here, we can guarantee that choose Killtest Juniper certification
JN0-340 practice exam, your success is ensured.
Killtest, from August 23 to September 20, offers 20% discount on all products, so
you can gain more.
www.killtest.com
www.killte
st.co
m
The safer , easier way to help you pass any IT exams.
1 / 6
Exam : JN0-340
Title :
Version : Demo
Juniper Networks Certified Internet Associate, J-series (JNCIA-J)
www.killte
st.co
m
The safer , easier way to help you pass any IT exams.
2 / 6
1. A stateful firewall on a J-series router is applied to which interface?
A. WAN interface
B. Trusted interface
C. Loopback interface
D. Untrusted interfaace
Answer: D
2. The built-in service module on a J-series router supports which two service types? (Choose two.)
A. NAT
B. L2TP
C. IPSEC
D. SSL VPN
Answer:AC
3. A J-series router can classify packets using which three methods? (Choose three.)
A. Evil bit
B. 802.1P
C. IP DSCP
D. MLPPP bundle
E. Multifield classifier
Answer: BCE
4. Which J-Web menu is used to view the current NAT pools being used on the router?
A. Monitor -> NAT
B. Manage -> NAT
C. Diagnose -> NAT
D. Configuration -> NAT
Answer:A
www.killte
st.co
m
The safer , easier way to help you pass any IT exams.
3 / 6
5. Which two statements accurately reflect the operation of a packet filter on a J -series router? (Choose
two.)
A. It maintains protocol state
B. It does not maintain protocol state C. It processes packets independently of a particular flow
D. It processes packets within the context of a particular flow
Answer: BC
6. When configuring an IPSec tunnel on a J-series router, which two options are required? (Choose two.)
A. IKE secret key
B. Encryption algorithm
C. Remote tunnel hostname
D. Remote tunnel endpoint address
Answer:AD
7. The use of NAT can break the operation of protocols which signal dymanic port numbers within the
packet flow. Which technology can be used in a NAT configuration to solve this problem?
A. Stateful firewall
B. Intrusion detection
C. Port address translation
D. Application layer gateways
Answer: D
8. Which J-series router process is responsible for performing autoinstallation?
A. rpd
B. dhcpd
C. autod
D. slarpd
Answer: C
9. How do you disable the autoinstallation functionality on a J-series router?
www.killte
st.co
m
The safer , easier way to help you pass any IT exams.
4 / 6
A. Return the router to the factory default configuration
B. Reboot the router using the removable PCMCIA flash
C. Remove the autoinstallation configuration from the router
D. Compress the configuration button for more than 5 seconds
Answer: C
10. The router is attempting to perform autoinstallation using interface fe -0/0/0 , but has had three
unsuccessful attempts. What is the next step it performs?
A. It shuts down all of its interfaces
B. It activates DHCP in server mode
C. It waits 30 seconds and then tries again
D. It reboots itself and attempts autoinstallion again
Answer: B
11. You are in the Configuration -> Quick Configuration -> Set Up menu of the J-Web application.
Which two fields must be filled in before the router will commit any changes? (Choose two).
A. Hostname
B. Root password
C. DNS name server
D. Loopback address
Answer:AB
12. What is one way to activate the rescue configuration on a J -series router?
A. Issue the load rescue command
B. Issue the activate rescue command
C. Press the rescue button for less than 5 seconds
D. Press the configuration button for less than 5 seconds
Answer: D
13. Which of the following loads a factory default configurati on onto your router if you do not have access
to the router CLI?
www.killte
st.co
m
The safer , easier way to help you pass any IT exams.
5 / 6
A. Press the power button for less than 5 seconds
B. Press the power button for more than 5 seconds
C. Press the configuration button for less than 5 seconds
D. Press the configuration button for more than 5 seconds
Answer: D
14. Within the J-Web initial setup wizard, which menu is used to configure community and trap group
information for the router?
A. Users
B. Set Up
C. SNMP
D. Interfaces
Answer: C
15. Autoinstallation supports which three options for obtaining configuration information? (Choose three.)
A. ILMI
B. RARP
C. DHCP
D. SNMP
E. SLARP
Answer: BCE
16. Which command configures a minimal SNMP configuration?
A. edit snmp community juniper
B. set snmp server 10.12.1.1 version 2c
C. set snmp community juniper authorization read-only
D. snmp community juniper authorization read-only
Answer: C
17. Which CLI command can assist you with configuration syntax?
www.killte
st.co
m
The safer , easier way to help you pass any IT exams.
6 / 6
A. help cli
B. help topic
C. help apropos
D. help reference
Answer: D
18. Which CLI command activates your configuration changes on the router?
A. save
B. commit C. set run config
D. copy start run
Answer: B
19. Which two statements regarding the JUNOS software user authenticati on methods are correct?
(Choose two.)
A. All users must be configured locally on the router
B. Multiple authentication methods can be configured
C. Only one authentication method can be configured
D. Multiple users can authenticate using a common local user account
Answer: BD
20. How is the J-Web interface accessed?
A. Using telnet
B. Using SSH
C. Using rlogin
D. Using HTTP
E. Using gopher
Answer: D
www.killte
st.co
m
www.killtest.com
Killtest Exams Features:
High quality IT exams practice questions and answers
Hot Certifications: IBM, CompTIA, Avaya, Symantec, Oracle, Adobe
One year free update
Verified Answers Researched by Industry Experts and almost correct.
Multiple-choice questions (MCQs) like real exam
At least 96% coverage of real exam
Experts using industry experience to produce precise and logical products
If failed, 100% money back
More Hot Pages from Killtest shared:
Promotion Page:
http://www.killtest.com/promotion.asp
Bundles Page”
http://www.killtest.com/bundles.asp
How To Pay Page:
http://www.killtest.com/howtopay.asp
FAQs Page
http://www.killtest.com/faq.asp
All Certifications Exams:
IBM CompTIA ISEB SCO Avaya Symantec Checkpoint
CIW EXIN EC-COUNCIL Juniper Network Appliance
Oracle VMware EMC LPI Novell Nortel Hitachi
Adobe OMG
www.killtest.com