Joseph Kälin [email protected], direct: +41 44 843 40 25, mobil: +41 79 413 70...
-
Upload
brook-patterson -
Category
Documents
-
view
219 -
download
1
Transcript of Joseph Kälin [email protected], direct: +41 44 843 40 25, mobil: +41 79 413 70...
Joseph Kälin [email protected] , direct: +41 44 843 40 25 , mobil: +41 79 413 70 14
For your customers:
MICRONOR
Fiber Optic ProductTo protect my
Investment
MICRONOR
202.07.2012 KJO Fiber Optic Product Part 3
The vibration is a important index showing the performance of a rotating electrical machines. They can be used for early detection of troubles. MICRONOR deliver a Sensor system for Turbo and Hydro Generators 100% in fiber optic.
Features
Application
- 100% fiber optic and Passive Solution- Detecting structural weakness and electrical disruption- Frequency range 1 to 400 Hz or up to 1000 Hz- Signal Sensitivity analog 100mV/g- operating 0° C to 100°C optional to 180°C- Measuring Range to 50g or 100g- Signal transmission over fiber max. 500m - optical feed trough and extension cable available - Standard STPC Connectors easy filed mounting kit.- Sensor in PTFE tube- Monitor box for mounting side of the generator or in the control room- very low noise and flatness over the hole range- compatible to all standard monitor systems and software - flexible installing for new and old generator- one set have 12 one axis sensor but 3 axis sensor available inclusive optical tem. sensors
- Turbo generator user- Hydro generator user- Nuclear Power station user- Wind Power station user- Generator manufacturerer
Product Part. Nr. 9600.30.101
MICRONOR
3
Features
Application
02.07.2012 KJO Fiber Optic Product Part 3
Product Part. Nr. 9600.30.101
Compatible to all Monitoring software
19 “ Rack version
MTBF > 100’000 hours
Various version of remote unit design available
single unit for one sensor version
Box for 7 vibration sensor version
Box for 2 Sensors version
MICRONOR
4
9800.66.101
MICRONOR Vibration Sensor have highest accuracy and lowest self noise.
02.07.2012 KJO Fiber Optic Product Part 3
Product Part. Nr. 9600.30.101
1, 2 and 3 axis Sensor in the same housing available
High linearity over the hole frequency range
Resonance frequency over 1,5 kHz
Weight only 20g
MICRONOR
5
9800.66.101
Product Part. Nr. 9600.30.101
MICRONOR multi channel feed through fit’s on standard hole on the Generator of Siemens, Alstom …
02.07.2012 KJO Fiber Optic Product Part 3
Special feed through high density, very customer friendly
Single connector feed through
Multi channel feed through with Single connector.
MICRONOR
6
9800.66.101
Product Part. Nr. 9600.30.101
02.07.2012 KJO Fiber Optic Product Part 3
Turbo Generator
Wind Power Generator
Hydro Generator
Nuclear Power Generator
Vibration sensor integrated direct in the Winding of the stator
The big generator
To protect y
our investm
ent
MICRONOR
7
MICRONOR your specialist for fiber optic product‘s
02.07.2012 KJO Fiber Optic Product Part 3