Jonsered Accessory Catalog NEW2 · 2016-07-10 · Helmet 505-665328 $11.50 G. Sweatband Helmet...

ACCESSORY CATALOG

2 These products are available exclusively from Authorized Jonsered Dealers. Stocked items may vary by dealer. Some products may need to be ordered. Suggested retail prices are subject to change without notice.

Like our highly-regarded power equipment products, Jon-sered accessories are tested and approved in real-world conditions, to ensure they meet our standards of quality, ergonomic design, and efficiency.

Our work clothing and safety gear has been carefully devel-oped to provide the best possible comfort, freedom of movement, and durability.

Our maintenance tools and other accessories are designed to help you get optimum performance from your Jonsered equipment.

Genuine Jonsered accessories and apparel are available only from your local authorized Jonsered dealer.

Please visit www.TiltonEquipment.com to locate your nearest authorized Jonsered dealer.

INSIDE

Protective Apparel.........................3 - 8

Helmets, Hearing Protection, Boots,Chaps, and Replacement Parts

Guide Bars....................................9

Quality Jonsered Bars, Bar and Chain Kits, Bar Covers

Engine and Bar & Chain Oil................10

Jonsered Cases.................................11

Filing Guides..............................12

Trimmer and Brushcutter Accessories................13 - 16

Heads, Blades, Lubricant & File Kit

Jonsered Wear..........................17 - 19

Gloves, Coats, Shirts, Suspenders.

Jonsered Headwear..................20 - 21

Caps & Hats

Jonsered Gear..................................22

Literature & Videos...........................23

ESSENTIAL GEAR FOR JONSERED OWNERS

Copyright © 2010 Tilton Equipment Company.

All rights reserved. No portion may be reproduced, transmitted, scanned or stored by any means, electronic or mechanical, without the expressed written permission of Tilton Equipment Company.

PLEASE NOTE: Items indicated as “NEW” mean they are new to this edition of the Jonsered Accessory Catalog.

3These products are available exclusively from Authorized Jonsered Dealers. Stocked items may vary by dealer. Some products may need to be ordered. Suggested retail prices are subject to change without notice.

JONSERED PRO HELMET ASSEMBLYHigh-density polyethylene hard hat. It has pre-sets for punch-out ventilation holes and a rain gutter. Shell is UV and chemical-resistant. The six-point suspension is adjust-able in two heights for individual fit and features a low noggin strap for better adherence. Adjustable ear cups feature a two-point mount that distributes pressure evenly around the comfortable PVC foam cushions. A specially-designed stainless steel spring maintains constant proper tension throughout the life of the helmet. Large visor provides good protection with a wide field of view and has black metal mesh for optimum, glare-free visibility. Noise Reduction Rating (NRR): 24db (Not Dielectric).

ITEM NO. 505-981801..........................................................$59.95

JONSERED �“BRUSH DEFENDER�” PRO SAFETY HEADGEAR

A very comfortable, lightweight assembly ideal for use with trimmers and brushcutters as well as power tools. The large, flip-up clear acetate face screen provides good protection with excellent vision. Earmuffs are made of durable ABS plastic with molded polyurethane inserts (the same cups as on the Jonsered safety helmet above). The ear pressure is adjustable via sliding tabs on the comfortable padded headband. Adjustable, low neck strap allows secure fit and hold, even in adverse working conditions (face shield fits Jonsered safety helmet linkage). Noise Reduction Rating (NRR): 24db (Not Dielectric).

ITEM NO. 504-981811..........................................................$49.95

JONSERED HEADBAND HEARING PROTECTORS

Durable, lightweight ear muffs made of ABS plastic. Comfortable soft foam ear cushions and foam padded headband. Ear cup pressure is adjustable via sliding tabs on the headband. Same ear cups as on helmet and headgear. Noise Reduction Rating (NRR): 25db

ITEM NO. 504-981710 .........................................................$25.20

JONSERED HEADBAND HEARING PROTECTORS

Durable, lightweight ear muffs made of ABS plastic. Extra-wide headband for secure and comfortable fit and less pressure on the head. Comfortable soft foam ear cushions. Noise Reduction Rating (NRR): 23db

ITEM NO. 504-980202 .........................................................$18.75

505-981801Tested according to

ANSI Standard Z89.1, Class G and E

NOTE: These products are not intended as a shield against injury. Their purpose is to lessen the chance of severe or fatal injury. For replacement parts for these assemblies, see page 6.

504-981811

504-981710

504-980202

WARNING: Visors alone do not provide adequate eye protection. Safety glasses or goggles that meet ANSI Standard Z87.1 must be worn.

PROTECTIVE APPAREL


PROTECTIVE APPAREL

DESCRIPTION SUITABLE FOR ITEM NO. S.R.P.A. Hygiene Kit Helmets, Headgear and

Hearing Protectors 505-665326 $11.50

B.Ear Protectors

ABS plastic cups w/ molded poly inserts.

Helmets 504-981703 $29.35

C. Metal MeshFace Screen Helmets & Headgear 505-665321 $10.45

D. Nylon MeshFace Screen Helmets & Headgear 505-665319 $16.75

E. Plexi Face Screen Helmets & Headgear 505-665343 $11.50

F. Visor HolderFor face screen. Helmet 505-665328 $11.50

G. Sweatband Helmet 505-675318 $4.15H. Rain Shield Helmet 504-981604 $4.15I. Suspension Helmet 505-675330 $12.00J. Sun Visor Helmet 505-665337 $4.70

HELMET & HEADGEAR ASSEMBLY REPLACEMENT PARTS

A. 505-665326

C. 505-665321

E. 505-665343

G. 505-675318

I. 505-675330

NOTE: These products are not intended as a shield against injury. Their purpose is to

B. 504-981703

D. 505-665319

F. 505-665328

H. 504-981604

RAIN/SUN SHIELD FOR BRUSH DEFENDER

Water-repellent textile guard fits between visor and headband.

ITEM NO. 505-665381.....$9.45


CHAIN SAW SAFETY BOOTSThis red and black hand-made natural rubber boot features a CSA Class 1 approved steel toe cap and has multi-layers of chain saw cut-resistant material in the instep and front of boot. It features a rugged, deep-tread sole, which is pre-fitted to accept optional metal traction studs, a full canvas inner lining and a nylon top with drawstring to keep out debris. Ridges around the heel and back protect against blows and make the boot easy to pull off. The upper-back features a calf-contour design for better fit and reduces chafing. Meets ANSI Class 3.

Boots available in 10½ and full sizes 7�–13 with liner, 10½ and full sizes 9�–16 without liner. All boots are standard width. See sizing chart below. Liners sold separately.

ITEM NO. 544-0278-(SIZE)....................................................$139.95

14" wool/polypropylene felt liners available in sizes: S (shoe size 6½�–7), M (shoe size 8�–9), L (shoe size 10�–11), and XL (shoe size 12�–13)

ITEM NO. NK14FL-(SIZE) ........................................................$21.15

Felt insole pads available in sizes: S, M, L, and XLITEM NO. FP-(SIZE) ................................................................. $3.95

PROTECTIVE APPAREL

U.S. BOOT SIZE

JONSERED 544-0278

BOOTS WITHOUT LINERS

JONSERED BOOT SIZE FOR USE

WITH LINERS

14�” FELT LINER (SOLD

SEPARATELY)7 N/A 544-0278-41 NK14FL-S

8 N/A 544-0278-42 NK14FL-M

9 544-0278-41 544-0278-44 NK14FL-M

10 544-0278-42 544-0278-45 NK14FL-L

10 ½ 544-0278-43 * NK14FL-L

11 544-0278-44 544-0278-46 NK14FL-L

12 544-0278-45 544-0278-47 NK14FL-XL

13 544-0278-46 544-0278-48 NK14FL-XL

14 544-0278-47 N/A N/A

15 544-0278-48 N/A N/A

16 544-0278-50 N/A N/A

544-0278-(size)

NOTE: These products are not intended as a shield against injury. Their purpose is to lessen the chance of severe or fatal injury.

*Size 10 ! with liner: In this situation, the choice of which size boot to order is up to the customer. In most cases it would be advisable to order the slightly larger size 46.

If the customer’s shoe size is closer to 10 (than 11) it would be best to order size 45.

lessen the chance of severe or fatal injury.



PROTECTIVE APPARELRUBBER CHAIN SAW SAFETY BOOTS

Similar to boot No. 544-0278, but with all rubber construction. 100% waterproof. The upper-back features a �“calf contour�” for a better fit and no chafing. NOTE: Close-out item. Available only in size 8½ with liner and 10½ without liner. Liner sold separately.

ITEM NO. 504-9810-43 .....$95.00

14" FELT LINERS FOR JONSERED BOOTS

Wool/polypropylene blend. Available sizes: S (shoe size 6½�–7), M (shoe size 8�–9), L (shoe size 10�–11), and XL (shoe size 12�–13)

ITEM NO. NK14FL-(SIZE).......$21.15 (Example: NK14FL-L)

FIBER PILE SOCKSThese warm and durable socks were designed as liners for Jonsered boots, but work well with almost any boot. They also make great slippers. Leather soles help prevent slippage inside the boot. Available sizes: M, L.

ITEM NO. 505-6546-(SIZE) . .$24.95

FELT INSOLE PADSWool/polypropylene blend. Available sizes: S (boot size 6�–7), M (boot size 8�–9), L (boot size 10�–11) and XL (boot size 12�–13)

ITEM NO. FP-(SIZE).................$3.95 (Example: FP-L)

TRACTION STUDSStud kit, including 35 metal studs and insert tool. For best results, studs should beinstalled in new boots.

ITEM NO. 505-654361 ......$15.20

NK 14FL-(size)

505-6546-(size)

FP-(size)

505-654361

504-9810-43


CHAIN SAW SAFETY CHAPSComfortable protection that�’s easy to wear. Durable polypropylene leg straps and Delrin® quick-release buckles allow easy adjustment and fast on and off. The waist has belt loops and a removable belt strap with a quick-release Delrin buckle. A double row of belt loops allows you to adjust the leg length. The straps are designed to avoid snagging in the brush and the smooth, 100% water-resistant nylon 600 Denier shell is also snag-resistant. There is also a double carpenter�’s pocket on the side of the right leg. Protection consists of a five-layer blend of special fibers and

�“warpknit�” material. This lightweight, yet effective, material covers the leg front, plus an additional 4" of extra width on each leg. Max coverage length: 36�”. Machine-washable (cold water, gentle cycle) and dry-able (low heat). Meets APA Class �“A�” specifications. UL-Classified. One size fits most.

ITEM NO. JCP-5C-GNRD .........................................$64.95

CHAIN SAW SAFETY CHAPSThese chaps have durable polypropylene leg & belt straps and Delrin®

quick-release buckles that allow easy adjustment and fast on and off. A double row of belt loops allows you to adjust the leg length. The 600 Denier Cordura® nylon shell is water-resistant and snag-resistant. Protec-tion consists of a five-layer blend of special fibers and �“warpknit�” material.This lightweight, yet effective, material covers the leg front, plus an addi-tional 4"of extra width on each leg. Maximum coverage length is 36�”. There is also a pocket on the left leg. Hand-wash (cold water) and hang to dry. One size fits most. UL-classified.

ITEM NO. JCR-SP.....................................................$71.40


JCP-5C-GNRDThese chaps are UL-Classified leg

protective garments in accordance with the ASTM F1897 standard specification for leg protection

for chain saw users. (2008) 9F92 OR 8F67.

PROTECTIVE APPAREL

JCR-SPThese chaps are UL-Classified leg



REPLACEMENT WAIST BUCKLE1-1/2", TSC, TSCW

ITEM NO. JCP-W2008.................$1.95

REPLACEMENT LEG BUCKLE1", TSC, TSCW

ITEM NO. JCP-L2008...................$1.25

JCP-W2008

JCP-L2008


JCP-5C-WRAPThese chaps are UL-Classified leg



JDSC5-(size)These pants are UL-Classified leg



PROTECTIVE APPARELWRAP-AROUND SAFETY CHAPS

These �“full-wrap�” chaps cover the front and sides of the upper leg. Plus, the lower portion completely encircles the lower leg and calf, below the knee. Protection consists of a five-layer blend of special fibers and �“warpknit�” material. Features include; a dual-height waistband for leg length adjust-ment, removable belt strap with Delrin quick-release buckle and durable 1" polypropylene leg straps with pinch-release buckles for easy adjustment and fast on and off. Also a double carpenter�’s pocket on right leg. Shell is 100% water-resistant 600 Denier nylon. Machine-washable (cold, gentle cycle) and dry-able (low heat). Meets APA Class A specifications. UL-Classified. One size fits most.

ITEM NO. JCP-5C-WRAP .........................................$74.95

CHAIN SAW SAFETY PANTSComfortable effective protection, with the convenience of a full pant design. Protective material consists of a five layer blend of special fibers and

�“warpknit�” fabric. Material covers the leg front, plus 4" of wrap-around coverage for each leg. These durable pants have a breathable nylon back-side with a reinforced seat area. The elastic rear waist has a raised bib and suspender buttons. Two front pockets with zipper closures and sawdust flaps, plus a zippered rear pocket. Front shell is smooth, snag and water-resistant 100% Nylon 400 Denier. Coverage extends from groin to approximately 1½" above hem. Machine-washable (cold water, gentle cycle) and dry-able (low heat). Pants meet APA Class �“A�” specifications and are UL-listed (Class-A). Order by waist size (inseam increases commen-surate with waist size). Available waist sizes: 28/30, 32/34, 36/38, 40/42, 44/46, and 48/50. (Ordering Example: JDSC5-36/38)

ITEM NO. JDSC5-(SIZE) ............................................ $77.95


Sprocket Nose

Replaceable Sprocket Tip

GUIDE BARSORIGINAL EQUIPMENT GUIDE BARS WITH JONSERED LOGO

TYPE �“SSN�” Scandinavian sprocket nose bar. High quality. Laminated design with multiple spot welds for durability.

TYPE �“JSN�”Professional solid milled steel bars with replaceable sprocket tips.

Your dealer offers these original equipment bars, as well as aftermarket guide bars and saw chain in a variety of types and lengths to suit your requirements.See your Jonsered Dealer for a perfect fit!

GUIDE BAR & CHAIN COMBOS KITSEach kit comes blister packed with one Original Equipment guide bar and two saw chain loops.

16" KIT �– 3/8 X .058 X 60 DRIVE LINKSIncludes chisel bumper-link �“EM�” chain. Fits Models: CS 2165, CS 2171, CS 2186, CS 2188, 2165, 2171, 2186, 2065, 2071, 2077, 2083(II), 2094, 2095, 625(II), 630S(II), 670S(II), 830, and 930S

ITEM NO. 531-017803..........................................................$79.95

18" KIT �– .325 X .058 X 72 DRIVE LINKSIncludes semi-chisel bumper link �“EM�” chain. Fits Models: CS 2141(S), CS 2145(S), CS 2150, CS 2152(C), CS 2153, CS 2156C, CS 2159C, CS 2240S, 2141, 2145, 2149, 2150, 2152, 2156C, 2041, 2045(T), 2050, 2051, 2054C, 2055, 450, 451EV, 455, 490, 49SP, 510SP, 520, 521EV, 525, 535, 52E, and 590

ITEM NO. 531-017801..........................................................$79.95

18" KIT �– 3/8 X .058 X 68 DRIVE LINKSIncludes chisel bumper-link �“EM�” chain. Fits Models: CS 2165, CS 2171, CS 2186, CS 2188, 2165, 2171, 2186, 2065, 2071, 2077, 2083(II), 2094, 2095, 625(II), 630S(II), 670S(II), 830, and 930S

ITEM NO. 531-017804..........................................................$79.95

JONSERED BAR COVERSFor 13"�–16" bars. 4-1/8" wide.

ITEM NO. 501-834402............................................................$7.19

For 18"�–22" bars. 4-1/8"wide.ITEM NO. 501-834405............................................................$8.24

For 24"�–28" bars. 4-3/4"wide.ITEM NO. 501-834502..........................................................$10.45

Bar And Chain Combo In Blister Pack

Jonsered Bar Cover


LUBRICATING OILS

JTC1

JTC25

JTC5

JP100

JP101

*Note: See your local authorized Jonsered dealer for current pricing on oil products.

TWO-CYCLE ENGINE OILWITH FUEL STABILIZER

Jonsered Turbo is a multi mix ratio oil recommended for all air-cooled two-cycle engines, regardless of the manufacturer's suggested mix ratio. This high-performance oil burns cleanly with virtually no exhaust smoke or carbon build-up. Meets the toughest OEM approved Global oil specifications for superior engine protection and reduced emissions, including JASO-FD, and ISO L-EGD. Blue color for easy identifi-cation of mixed fuel. Packaged in shrink-wrapped six-packs.

1-GALLON MIX*Bottles contain 2.6 fl. oz. to mix with exactly one gallon of gas.

ITEM NO. JTC1

2½ GALLON MIX*Bottles contain 6.4 fl. oz. to mix with exactly 2 ½ gallons of gas.

ITEM NO. JTC25

5-GALLON MIX*Bottles contain 12.8 fl. oz. to mix with exactly five gallons of gas.

ITEM NO. JTC5

PREMIUM BAR & CHAIN OIL* High-quality oil with 10 times the extreme pressure/anti-wear additives of most other bar and chain oils.

Formulated from 100% virgin oils High-tac, anti-sling additives Special penetration additives for instant lubrication Non-carcinogenic Recommended for all chain saws

Premium multi-grade. All-season oil. Pours at -20°. In one gallon bottles.ITEM NO. JP100

Bottles contain one gallon of premium SAE30 oil. ITEM NO. JP101


JONSERED CASES

504-980095

SOFT SHELL CHAIN SAW CARRYING CASE

This black and red 1000 Denier Cordura® soft shell case keeps your Jonsered chain saw protected during travel and in storage. Zipper closure and velcro wrap on the handles. NOTE: Accepts only chain saws with 16" or shorter guide bars. Holds Jonsered models up through CS 2171.

ITEM NO. 504-980095 ...................$24.95

JONSERED CHAIN SAW TOOL-BOX CASE

Made of rugged, durable red and black high density polyethylene this Jonsered tool box will not rust or corrode. It provides enough space to handle chain saws up to the CS 2171 with up to 20" bars, with room to spare for oil, tools, manuals, small replacement parts and chain. Stackable for easy storage, it features a handle for easy transport, and a padlock tab for security. Its the perfect way to keep your Jonsered safe and sound. Dimensions: 20-½" L x 11-7/8" W x 13" H without scabbard in place.

NOTE: Chain saw not included. Full wrap style handle models will not fit in this case.

ITEM NO. JBOX ..............................$44.95

JBOX


FILING GUIDESCOMPLETE FILE KIT

Designed for use with saw chain supplied as original equipment with Jonsered chain saws. Includes a combination file guide, file handle, two round files and flat file.

.325 PITCH KITFor chain with the following numbers engraved on the drive links*: D1, D2, D3, 50J, 58J, and 63J

ITEM NO. 504-981667..$19.90

3/8 PITCH KITFor chain with the following numbers engraved on the drive links*: J1, J2, J3, 72, 73, and 75

ITEM NO. 504-981668..$22.95

COMBINATION FILE GUIDE

Guide rests on chain at proper filing angle. Coated rollers allow easy filing motion and hold file at proper height. Includes guide for accurate filing of depth gauges. Designed for use with saw chain supplied as original equipment with Jonsered chain saws.

.325 PITCH GUIDEFor chain with the following numbers engraved on the drive links*: D1, D2, D3, 50J, 58J, and 63J

ITEM NO. 504-981675....$9.40

3/8 PITCH GUIDEFor chain with the following numbers engraved on the drive links*: J1, J2, J3, 72, 73, 75.

ITEM NO. 505-243301.$10.95

*NOTE: Designed to work with these chains only. May work with other chains.

See your Jonsered dealer for details.

504-981668 Complete File Kit Contents

Combination File Guide Combination file guide being usedwith file to sharpen a chain.


TRIMMER LINE

DIAMETER LENGTH PKG. COLOR ITEM NO. S.R.P.1.5 mm / .060" 50' Shell Blue 531-008057 $3.30

2.0 mm / .080" 50' Shell Green 531-008058 $3.30

2.4 mm / .095" 50' Shell Orange 531-008059 $3.90

2.7 mm / .105" 40' Shell Yellow 531-008060 $3.90

3.0 mm / .118" 33' Shell Red 531-008061 $3.90

2.0 mm / .080" 433' Shell Green 531-008075 $18.95

2.4 mm / .095" 300' Shell Orange 531-008076 $18.95

2.7 mm / .105" 233' Shell Yellow 531-008077 $18.95

3.0 mm / .118" 186' Shell Red 531-008078 $18.95

2.4 mm / .095" 787' Spool Orange 531-006086 $42.95

2.7 mm / .105" 787' Spool Yellow 531-007565 $52.95

3.0 mm / .118" 787' Spool Red 531-006088 $67.95

JONSERED SILENT TRIMMER LINE The shape of this line is a patented design. It reduces the noise level by 50% compared to round trimmer cords of the same diameter. It also creates less air resistance, which means less �“load�” on the engine. This also allows the trimmer head to get up to speed faster. Silent line�’s unique material has a special surface finish that resists splitting at the ends with good wear resistance. It also minimizes �“welding�” together inside the trimmer head. The shape of the cord counteracts breakage at the outlet hole. Available in five color-coded sizes.

DIAMETER LENGTH PKG. COLOR ITEM NO. S.R.P.2.4 mm / .095" 300' Shell Grey 544-965107 $20.75

2.7 mm / .105" 233' Shell Grey 544-965101 $20.75

3.0 mm / .118" 186' Shell Grey 544-965102 $20.75

3.3 mm / .130" 250' Shell Grey 544-965103 $24.95

2.4 mm / .095" 800' Spool Grey 544-965108 $59.95

2.7 mm / .105" 800' Spool Grey 544-965104 $59.95

3.0 mm / .118" 800' Spool Grey 544-965105 $77.95

3.3 mm / .130" 800' Spool Grey 544-965106 $97.95

JONSERED SILENT DURO TRIMMER LINESilent Duro has been developed using new materials and offers the same unique characteristics of standard Silent line with lower noise levels, lower air resistance and anti-welding qualities. Silent Duro is made of a tough inner core and an outer layer. A special production technique allows these materials to be combined to produce a high level of durability, increasing working life and making the line less susceptible to snapping. Available in four sizes. Color: gray.


TRIMMER HEADSTRIMMER HEADS

DESCRIPTION FITS MODEL(S)

LINE DIA.

ITEM NO. S.R.P.

�“Tap-N-Go�” 25C GT2126, GT 2128 .080 531-008601 $18.85

�“Tap-N-Go�” Dual Line Head

GT2124 .080 530-095846 $21.95GT2125 .080 531-008808 $18.85

GC2125/C, BC2125, GR2032L/D .080 531-008074 $19.95

�“Tap-N-Go�” Auto Feed Dual-Line Head

BC2236, GC2236,

CC2036, GR2036.105 531-008607 $19.95

�“Tap-N-Go�” 25 Head

BC2125, BC 2126, CC 2128,

GC2125/C, GC 2128/C

.125 531-008809 $18.85

�“Tap-N-Go�”45 Head

CC 2145, FC 2145S .175 531-008602 $26.25

�“S35�”Manual Feed Dual-Line Head

GC2125/C, BC2125, GR2032L/D .080 531-008073 $17.95

�“AUTO 32�” Auto-Feed Dual Line Head

GR2026L/D, GR2032L/D,

BC2125, GC2125/C.095 531-008071 $40.05

�“AUTO 55�” Auto-Feed Dual-Line Head CC 2036, GR2036 .105 531-008096 $50.40

TRIMMY S II Pro Manual-Feed Head

CC 2036, GR2036, RS52, FC2145S .105 502-260816 $54.10

KIT: Includes Pro Manual Feed Head No. 502-260813 and

Guard No. 503-916003

RS44, RS52 .105 JLHK-52 $58.95

DESCRIPTION FITS MODEL(S)

ITEM NO. S.R.P.

�“Pro Trim�” Head (uses original guard) With 3 free-swinging blades made

of high-impact plastic. Blades are reversible and replaceable.

BC2125, GC2125,

GR2032L/DTM5020907 $26.95

Replacement blades for No. TM5020907. Package of six.

BC2125, GC2125, GR2032L/D TM5020016 $4.95

�“Pro Trim�” Head (requires alternate guard)

CC 2036, GR2036, FC2145S, RS52 TM5020918* $26.95

*Alternate guards to be used with Pro Trim Head No. TM5020918

CC 2036, GR2036 503-895203 $22.95FC2145S, RS52 502-263403 $22.95

Pro-Trim Head

�“PRO-TRIM�” POLY BLADE TRIMMER HEADS

�“Tap N Go�” 25 Head



�“S35�” Head

�“Auto 32�”

�“Tap N Go�” 25C Head

�“Auto 55�”

�“SII�”


CUTTER BLADESMETAL GRASS & WEED BLADES

NOTE: these blades are for cutting non-woody vegetation only.

DESCRIPTION ARBOR FITS MODEL(S)

ITEM NO. S.R.P.

4-tooth, wide body 10" dia. blade. 1"GC2125/C,

BC2125, BC2126, CC2128, GC2128/C

537-149603 $17.80

Optional support cup for No. 537-149603 - GC2125, BC2125 503-890101 $9.03

4-tooth, small body 11" dia. blade. 1" CC2036, GR2036, GR2032D, BP2052 537-149203 $18.95

�“Multi 255�” 3-tooth, 10" dia. blade.20mm RS51 537-148903 $16.95

1" CC2036, GR2036 537-149003 $16.95

3-tooth, 12" dia. blade.

20mm GR20363 537-149303 $23.63

1"CC2036, GR2036, BP2052, GC2236,

CC2145537-149403 $20.53

KIT: Includes 4-tooth, 9" dia. blade, J-handle, guard, support cup and blade cover.

20mm GR2032L1 503-781702 $79.951" GR2032L2 503-781704 $57.95

KIT: Includes 4-tooth, 9" dia. blade, guard, and support cup.

20mm GR2032D1 JGBK-2632D $41.951" GR2032D2 JGBK-2032-1 $43.95

KIT: Includes 3-tooth, 12" dia. blade, guard, and support cup. 20mm CC2036, GR20363 JGBK-2036 $51.95

KIT: Includes 4-tooth, 10" dia. wide body blade, guard and support cup.

1" CC2036, GR20364 JGBK-2036-1 $47.9520mm RS52, FC2145S JGBK-52 $47.50

METAL BRUSH BLADESNOTE: Not for use with loop handle trimmers.

DESCRIPTION FITS MODEL(S) ITEM NO. S.R.P.

�“Scarlett�” 22-Tooth, 8" dia. Brush blade, 1" Arbor

BC2125, CC2128, GR2032D2, BC2236, GR20364, CC2036, CC2145,

537-277503 $16.75

�“OPTI 26T�” 26-tooth, 8" dia. brush blade, 1" Arbor.

BC2125, CC2036, GR2032D2, GR20364 BC2236, CC2036, CC2145

508-904503 $15.50

�“Scarlett�” 22-Tooth 8" dia. brush blade20 mm Arbor GR2032D2, GR20363 537-277603 $16.75

�“OPTI 26T�” 26-tooth, 8" dia. brush blade. 20 mm Arbor GR2032D1, GR20363 508-901503 $15.50

�“OPTI XS�” 22-tooth, 8" dia. brush blade. 20 mm Arbor RS52, FC 2145S 508-901403 $16.75

�“OPTI XS�” 22-tooth, 9" dia. brush blade. 20 mm Arbor RS 44, RS 52, FC 2145S 508-902403 $20.95

�“Scarlett�” 24-tooth, 9" dia. brush blade 1�” Arbor RS44, RS52, FC2255 537-278303 $20.95

�“Scarlett�” 24-tooth, 9" dia. brush blade 20 mm Arbor FC2145S 537-278403 $20.95

BLADE NOTES:1 Units with 20 mm arbor, before serial number 0218000492 Units with 1" arbor, after serial number 0218000493 Units with 20 mm arbor, before serial number 025000001 4 Units with 1" arbor, after serial number 025000001

Three-Tooth

Four-Tooth

Opti Brush Blade

Four-Tooth Small Body Grass Blade

�“Scarlett�” Blade


BRUSHCUTTER HARNESSESVECTOR 3-55 PRO HARNESS

The wide shoulder straps ensure optimal weight distribution. The harness is easy to adjust, with shock-absorbent hip pad with moveable attachment. Suitable for working with larger brushcutters and clearing saws, such as the Jonsered FC 2145S and FC 2255.

ITEM NO. 504-045301.......................................................$109.30

VECTOR 2-55 HARNESSHarness with large support plate in the spine and weight-relieving hip pad. Quick-adjusting straps.

ITEM NO. 537-275801.........................................................$58.90

VECTOR 2-35 HARNESSFor light to mid-range brushcutters. With large support plate in the spine and weight-relieving hip pad and quick-adjusting straps.

ITEM NO. 537-275804..........................................................$45.65

Vector 3-55

Vector 2-55

Vector 2-35

MAINTENANCE

ANGLE-DRIVE GREASESpecially-formulated for trimmer/brushcutter bevel gear drives.

ITEM NO. 504-980020 ........... $10.95

504-980020

FILE GUIDE/SET TOOLAllows accurate blade maintenance right on the machine. Sturdy guide holds file firmly. Has clearly-marked angle guides and tooth-setting feature. Includes handy belt holster.

ITEM NO. 504-981685.............$24.55

504-981685


JONSERED WEARJONSERED WORK GLOVES

Kid leather work gloves with reinforced thumb, elastic wrist cinch. Cuffs with Velcro closure. One size.

ITEM NO. 523-750410........$18.95

JONSERED CHAIN SAW SAFETY GLOVES

Rugged work gloves with a special "anti-chip" cuff feature that keeps wood chips and debris out. The left-hand glove has cut-resistant Ballistic Nylon and Terylene�™ fiber material in the backing. Highly-visible safety orange backing and stitched cowhide palm. Available sizes: L and XLChain Saw Glove

ITEM NO. JG-(SIZE) ............. $19.95Wool/Nylon Glove Liner (one size)

ITEM NO. GK476096-L ........$5.49

JONSEREDFORESTRY JACKET

Lightweight jacket made of tear-resistant and condensation-free fabric. Full-length zip. Ven-tilated yoke with mesh backing. Extended back. Corduroy collar. Water-resistant. Dual chest pockets with zippers. Available sizes: M (38"�– 40"), L (42"�–44"), XL (46"�–48"), and XXL (50"�–52")

ITEM NO. 504-9842-(SIZE) ...$64.95

JONSERED LONG-SLEEVE T-SHIRT

Ash gray Beefy-T with same imprint as J923 on back. Jonsered logo and saw design on front. Jonsered logo down both sleeves. Available sizes: S, M, L, XL, and XXL

ITEM NO. J925- S, M, L, OR XL....................$25.95ITEM NO. J925-XXL ............$28.95


JG-(size)

504-9842

J925-(size)

J925-(size)Back Imprint

523-750410


JONSERED WEARLIMITED EDITION JONSERED T-SHIRT

From Sweden. 80/20 cotton/polyester blend. Ash gray with red piping and white trim on sleeve. Jonsered logo with dot pattern in white on front.Men�’s Sizes: M, L, XL, and XXL

ITEM NO. J929-(SIZE)...........$19.95Women�’s Sizes: S, M, L, and XL

ITEM NO. J929W-(SIZE)........$19.95

JONSERED POCKETBLACK T-SHIRT

Black 50/50 cotton/poly blend. Full color action shot on back. Jonsered logo on front. Available sizes: M, L, XL and XXL.

ITEM NO. J928-M, L OR XL ...$17.95ITEM NO. J928-XXL ............ $20.95

JONSERED TURBO GRAY POCKET T-SHIRT

Gray 50/50 cotton/poly blend pocket t-shirt. Jonsered Turbo chain saw design on back. Jonsered logo above pocket on front. Avail-able sizes: M, L, XL, and XXL

ITEM NO. J923-M, L, OR XL . $14.95ITEM NO. J923-XXL .............$18.95

J923-(size)

J928-(size)

Women�’s SizesJ929W-(size)

Men�’s SizesJ929-(size)


JONSERED TURBOCHAIN SAW TANK TOP

Red heavyweight 100% preshrunk cotton. Double-needle stitching. White Jonsered logo on front. Available in Medium, Large, X-Large and XX-Large.

ITEM NO. J920 M, L, OR XL...$16.95ITEM NO. J920 XXL..............$18.95

JONSERED TURBO SPORT RED POLO

Combed red cotton with black white check pattern on the collar and sleeves. White Jon-sered logo on front. Available sizes: L, XL, and XXL

ITEM NO. J931- L OR XL .......$27.95ITEM NO. J931- XXL ............$33.95

JONSERED TURBO SPORT BLACK POLO

Combed black cotton with red, black and white check on the collar and sleeves. Red Jonsered logo on front. Available sizes: L, XL

ITEM NO. J935- L OR XL .......$27.95ITEM NO. J935- XXL ............$33.95

JONSERED SUSPENDERS2" x 48" black elastic suspenders with red Jonsered logos.With heavy-duty metal clips

ITEM NO. 504-9816-56 ...... $19.95With leather button ends

ITEM NO. 504-9816-60 .......$19.95

JONSERED PATCHTurn anything into Jonsered gear with these red and black patches. Size: 3 ½" x 1" with iron-on backing.

ITEM NO. J940.......................$3.95

JONSERED WEAR

J931-(size)

J935-(size)

504-9816-56

504-9816-60

J940

J920-(size)


J903

J901

J916

JONSERED WEAR

J902

J915

J917

JONSERED �“DELUXE�” LOW PROFILE CAP

Black low profile twill cap with black and red sandwich visor. Jonsered saw and logo on front. Jonsered �“J�” emblem on back. Buckle closure.

ITEM NO. J901 ..................... $10.95

JONSERED LOW PROFILE CAP

Same as Jonsered "Deluxe" Low Profile Cap,but without the "J" emblem on back. Snap-fit clo-sure.

ITEM NO. J915 ........................$7.95

JONSERED RED TWILL CAP

Red medium profile 100% cotton sanded twill cap. Jonsered logo and tree graphic on front. Snap-fit closure.

ITEM NO. J903 ........................$9.95

JONSERED BLACK CAP

Black low profile 100% cotton chino twill cap. Jonsered logo and tree graphic on front. Slide buckle closure.

ITEM NO. J902 ..................... $10.95

JONSERED TAN OUTDOORSMAN CAP

Tan low-profile twill cap. Jonsered logo on front, wildlife scene on bill. Buckle closure. Ideal for duck hunters.

ITEM NO. J916 ..................... $12.95

JONSERED �“FLANE�” CAPRed and black cloth cap with red wave on black bill. Red embroidered Jonsered Logo and saw on front. Buckle Closure.

ITEM NO. J917 ....................... $7.95


JONSERED WEAR

J800

J909

J914

J801

J904

J913

JONSERED RED/BLACK CLOTH CAP

Red medium profile twill cap with black bill. Jonsered logo and saw on front. Buckle closure.

ITEM NO. J909 ....................$14.95

JONSERED BLACK TWILL/MESH CAP

Black traditional high profile cap. Cotton/poly twill front and breathable nylon mesh back. Jonsered logo and saw on front. Snap-fit clo-sure.

ITEM NO. J904 ....................$11.95

JONSERED CAMO CLOTH CAP

Low profile structured cloth cap. Jonsered logo and saw embroidered in black. Velcro closure.

ITEM NO. J914 ..................... $8.95

JONSERED BLAZE ORANGE CAP

Orange traditional high profile twill cap. Foam- insulated. Jonsered logo and saw on front. Snap-fit closure.

ITEM NO. J913 ....................$12.95

JONSERED KNIT SKI CAPS

Acrylic super-stretch knit ski cap. Perfect for winter.Red with Jonsered logo in white

ITEM NO. J800 ..................... $7.95Black with Jonsered logo in red

ITEM NO. J801 ..................... $7.95


JONSERED LOGO DECALDie-cut Jonsered logo in red (letters only).

Small Jonsered Logo 11.25" x 2"ITEM NO. 90-1160201 ..........$2.95

Large Jonsered Logo 45.2" x 8"ITEM NO. 90-1169202 ........$10.95

Medium Jonsered Logo - Reflective Red Material 27.2" x 4.82"

ITEM NO. 90-1166801 ........$14.95

JONSERED �“I FARM THE FOREST�” BUMPER STICKER

4" dia. white removable adhesive bumper stick-er with red, black and green image of saw, logo and trees. The inscription below the logo states, �“Trees are a renewable resource.�”

ITEM NO. 90-1160602 ......... $1.00

JONSERED BLINKEROur red multi-function blinker can be clipped onto clothing, bags or loads to ensure everyone sees you in the dark. 5" high, 2.5" diameter. A single button sets it to blink slowly, quickly, shine steady and go off.

ITEM NO. 90-1182901...........$3.95

JONSERED GEAR

90-1165301

90-1161001

Jonsered Logo Decal

90-1160602

90-1186801

108-075622

90-1181601

90-1185301 90-1182901

JONSERED SAW DECALDie-cut Jonsered chain saw in red, black and silver. 23.5" x 9.5"

ITEM NO. 90-1165301 .......$13.95

�“I HEAT WITH JONSERED�”BUMPER STICKER

Red and black saw and logo on silver removable adhesive. 9.25" x 2.5"

ITEM NO. 90-1161001...........$1.00

JONSERED LICENSE PLATE FRAME

Black plastic frame with the words �“Got Wood?�” on the top, and the Jonsered Logo and Chain Saw on the bottom in red and silver.

ITEM NO. 90-1186801...........$3.95

JONSERED KEYCHAINFlexible vinyl key chain with saw image on one side. Approx. 3.75" x 1".

ITEM NO. 90-1181601...........$1.50

JONSERED BOTTLE OPENER

A realistic die-cast replica of a Jonsered chain saw!ITEM NO. 108-075622 ..........$6.95

JONSERED �“KOOZIE�”Keep your drinks cold as the glaciers in Sweden with our official Jonsered can cooler.

ITEM NO. 90-1185301...........$1.95


JONSERED SAMPLER DVD

Jonsered CombiCutters (1:30 minutes)Introduction to Jonsered Power Equipment (5 minutes)Introduction to the Iron Horse mini-skidder (7:35 minutes)Introduction, use and assembly of the Portable Chain Saw Mill (15 minutes)Introduction, use and assembly of the Portable Band Saw Mill (20 minutes)

ITEM NO. 90-1309901....FREE

JONSERED PORTABLE SAW MILLS

10 page brochure.ITEM NO. 90-0005801 ...FREE

VIDEOSInstructions on basic assembly and opera-tion.Chain Saw Mill 15:00 min. VHS.

ITEM NO. JCSMV ........$4.95Band Saw Mill 20:00 min. VHS.

ITEM NO. JBSMV ........$4.95Band Saw Mill 20:00 min. DVD.

ITEM NO. JBSMDVD ... $4.95

CLEARING FOR THE FUTURE

A complete guide to forest stand thin-ning and management. Includes sec-tions on brushcutter/clearing saw operating techniques, tree spacing and blade maintenance.20 page brochure.

ITEM NO. 108-071951 ...FREE12:45 min. VHS.

ITEM NO. JCFFV ..........$9.95

LITERATURE & VIDEOSINSTRUCTIONAL VIDEO: CHAIN SAW INSTRUCTIONS

Update of �“How to use a Chain Saw�” in DVD format with live video plus many diagrams. Segments include; Safety, Han-dling, Felling, Limbing, Cross-cutting, Maintenance and Complicated Cuts. 2009.

ITEM NO. 505-574203....$9.9526:40 min. VHS.

ITEM NO. JHCS ...............$9.95

JONSERED CATALOGFull product line catalog.

ITEM NO. 115-264027 ......FREEPocket Brochure

ITEM NO. 90-1005801.......FREE

JONSERED IRON HORSE

BROCHUREColorful letter-sized glossy brochure that highlights technical specifications and fea-tures of the machine, and provides a listing of the available accessories for the Iron Horse.

ITEM NO. 90-1005601 ......FREE

VIDEOSAn introduction to the machine, and a brief overview of its capabilities.7:35 min. VHS.

ITEM NO. 90-1306603-V ...FREE(For the DVD version,

please order No. 90-1309901)

Instructional Video:Chainsaw Instructions

Jonsered Iron Horse

Jonsered Portable Sawmills

Jonsered introduced the world's first lightweight chain saw in 1954. Ever since, this Swedish company has been a leader in the development of innovative, high-performance machines for property management, from the forest to the home.Jonsered's focus is on the operator. Our products are designed to provide the best possible operating experience, with an emphasis on performance, safety, ergonomics, and the overall satisfaction that comes from working with a finely-tuned machine.

www.JonseredPower.comImported in the East, South and Midwest U.S. by Tilton Equipment Company

For the authorized Jonsered dealer near you, please visit www.TiltonEquipment.com or call (toll-free) 1-877-693-7729

THE POWER TO KEEP UP WITH YOU

Legendary Turbo Chain SawsA complete line, from 38cc - 88cc

Trimmers, Brushcutters & Clearing SawsCut anything from Grass to Large Saplings!

Portable SawmillsBandsaw and Chain Saw Models.

Easy to set up and operate!

Iron Horse Log & Utility TransporterGoes anywhere you can walk, with

all the strength and agility of a draft horse - and then some!

© 2010 Tilton Equipment Company No. 90-1072001

®

Landscape EquipmentHedge Trimmers, Blowers, and

�“Combi�” Multi-Attachment Power Tools

Jonsered Accessory Catalog NEW2 · 2016-07-10 · Helmet 505-665328 $11.50 G. Sweatband Helmet...

Documents

Transcript of Jonsered Accessory Catalog NEW2 · 2016-07-10 · Helmet 505-665328 $11.50 G. Sweatband Helmet...