JFX200-2513 Safety Precautions - MIMAKIForeword 1 Foreword Congratulations on your purchase of UV...

Safety Precautions

MIMAKI ENGINEERING CO., LTD.https://mimaki.com/ D203453-10

TABLE OF CONTENTS

ii

Foreword............................................................................................................ 1For Safe Operation ............................................................................................ 3Warning Labels................................................................................................ 11Usage Restrictions........................................................................................... 14Avoid These While Operating the Printer ........................................................ 15

Foreword

1

ForewordCongratulations on your purchase of UV inkjet printer JFX200-2513EX.JFX200-2513EX is a UV inkjet printer that supports high speed and high image quality, printing with UV ink.

l DISCLAMER OF WARRANTYTHIS LIMITED WARRANTY OF MIMAKI SHALL BE THE SOLE AND EXCLUSIVE WARRANTY AND IS INLIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANYIMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS.AND MIMAKI NEITHER ASSUMES NOR AUTHORIZES DEALER TO ASSUME FOR IT ANY OTHEROBLIGATION OR LIABILITY OR MAKE ANY OTHER WARRANTY OR MAKE ANY OTHER WARRANTY INCONNECTION WITH ANY PRODUCT WITHOUT MIMAKI’S PRIOR WRITTEN CONSENT.IN NO EVENT SHALL MIMAKI BE LIABLE FOR SPECIAL, INCIDNETAL OR CONSEQUENTIALDAMAGES OR FOR LOSS OF PROFITS OF DEALER OR CUSTOMERS OF ANY PRODUCT.

l Requests• This Operation Manual explains how to operate and maintain "UV inkjet printer

JFX200-2513EX" (hereafter called "this machine").• Please read and fully understand this Operation Manual before using this machine. Also, please always

keep this Operation Manual handy.• Make arrangements to deliver this Operation Manual to the person in charge of the operation of this

machine.• This Operation Manual has been carefully prepared for your easy understanding. However, if you have

any inquiries, contact your local distributor, our sales office, or service center.• Descriptions contained in this Operation Manual are subject to change without notice for improvement.• In the case where this Operation Manual should be illegible due to destruction or breakage, contact our

sales office.• You can also download the latest manual from our website.

l FCC Statement (USA)This equipment has been tested and found to comply with the limits for a Class A ITE, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interferencewhen the equipment is operated in a commercial environment.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the operation manual, may cause harmful interference to radio communications.Operation of this equipment in a residential area is likely to cause harmful interference in which case theuser will be required to correct the interference at his/her own expense.

• In the case where MIMAKI-recommended cable is not used for connection of this machine, limits providedby FCC rules can be exceeded. To prevent this, use of MIMAKI-recommended cable is essential for the connection of this machine.

l Interference to televisions and radiosThe printer described in this manual generates low radio waves while it is in operation. This printer caninterfere with the reception of radios and televisions if set up or used under improper conditions. This printeris not guaranteed against any damage to specific-purpose radios and televisions.If you feel that this printer might be causing reception interference with your radio or television, check byturning the power switch on and off. If the reception interference disappears when the power is turned off, itis likely that this printer is the cause of the interference.If this is the case, try to eliminate it by performing any or a combination of the following procedures.

• Change the direction of the receiving antenna of your radio/television until there is no reception.• Move the receiver away from the product.

Foreword

2

• Plug the power cord of this printer into an outlet which is isolated from power circuits connected to thetelevision set or radio.

Reproduction of this manual is strictly prohibited. All Rights Reserved.© 2019 MIMAKI ENGINEERING Co., Ltd.

For Safe Operation

3

For Safe Operation

SymbolsThis manual uses symbols to explain the precautions during use. The indicated symbols differ depending onthe contents of the caution. Please understand the meaning of each symbol to use this machine safely andcorrectly.

l Examples of symbolsContents

WARNING Failure to observe the instructions given with this symbol can result in deathor serious injuries to personnel. Be sure to read it carefully and use theprinter properly.

CAUTION Failure to observe the instructions given with this symbol can result in minoror moderate injuries.

GENERALWARNING

Indicates items that need to be noted. Specific notes are drawn in the figure.

GENERALMANDATORY

ACTION

This symbol indicates that the action shown must be executed. Appears infigures for specific instructions.

GENERALPROHIBITION

This symbol indicates that the action shown is prohibited. Appears in figuresfor specific prohibitions.

IMPORTANT Important notes for the use of this printer are given with this symbol.Understand the notes thoroughly to operate the printer properly.

HINT Useful information is given with this symbol. Understand the notesthoroughly to operate the printer properly.

REFERENCEINFO

Indicates the reference page with relevant content. Click the text to displaythe corresponding page.

For Safe Operation

4

Warnings and Precautions for Use

l If a problem occurs

• If someone swallows ink or cleaning solution by mistake, keep him or her quiet and take them to see adoctor immediately. Do not let allow the person to swallow the vomit.

• If you inhale a great deal of vapor and feel ill, immediately move to a location with plenty of fresh air, andkeep yourself warm and quiet. Consult a doctor as soon as possible.

• In the unlikely event that a foreign object such as metal, water, liquid enters the inside of this machine, turnoff the power immediately. Afterwards be sure to unplug the power plug from the outlet. If used as it is, itmay cause fire or electric shock.

• If ink leaks, turn off the main power switch and unplug the power cable. After that, contact your localdistributor, our sales office, or service center.

• In case of an abnormal incident such as smoke emission or a strange odor, immediately turn off the powerswitch, and make sure you remove the plug from the outlet. Continuing use even after an abnormalincident occurs may cause fire or electric shocks. Ensure that there is no more smoke, and request repairsfrom your local distributor or our sales office.

• Never attempt repairs yourself as it can be dangerous.

l Handling of Ink and Washing Liquid

• Make sure to read the Safety Data Sheet (SDS) before handling ink and washing liquid.• Some of the ingredients are toxic to aquatic organisms. Prevent leakage into natural water systems or

domestic wastewater.• If the ink gets on your skin or your clothes, rinse it out immediately with soap or water. If you get the ink in

your eyes, wash them immediately with water and consult a doctor.• Dispose of the waste ink according to local regulations.• Store ink and washing liquid in a cool, dark place. Also, keep them out of reach of children.

• When handling ink and washing liquid, pay close attention to ventilation and be sure to wear the includedsafety glasses and gloves. The ink or washing liquid may get in your eyes.

• Using alternative ink may cause malfunctions. Malfunctions caused due to the use of alternative ink are outof the scope of warranty. Please understand that the cost of repairs in this case is to be borne by thecustomer.

• Never refill an ink bottle. Malfunctions caused due to refilling of the ink bottle are out of the scope ofwarranty, and our company does not assume any responsibility for the same.

• Do not use the ink designed for this printer with other printers. Doing so may cause damage to the printer.

l Handling Ink Bottles

• Keep the ink bottles and the waste ink tank out of reach of children.

For Safe Operation

5

• If an ink bottle is moved from a cold place to a warmer place, let it sit for at least three hours before use.• Open the ink bottle just before use and use it up as soon as possible. If the bottles are left open for a long

time, the printing quality may degrade.• For device protection, do not use any ink other than the dedicated ink.

• Do not knock the ink bottle hard or shake it violently. This can cause the ink to leak from the bottle.

l Be Careful with Moving Parts

• Keep your fingers and other body parts away from hazardous moving parts. There is a risk of injury.

l Warning Labels

• Warning labels are affixed to this machine. Fully understand the contents of the warning labels. If awarning label becomes illegible due to dirt or peels off, purchase a new one from your local distributor orour sales office.

l Ultraviolet Rays (UV), UV-LED

• The LED UV unit is extremely hot. Turn off the LED UV unit and perform maintenance once the devicecools down adequately. Otherwise, you may burn yourself.

• Some UV rays may leak from the circumference of the LED UV unit. Wear gloves, long-sleeved clothes,light-shielding masks, light-shielding glasses, etc. to protect your skin and eyes from UV exposure.(1) Exposure of skin or eyes to UV rays can cause inflammation or skin cancer.(2) Even if the UV light is weak and not likely to cause inflammation, repeated exposure to it may result in a chronic

disease.(3) Viewing the light from the lamp with the naked eye can cause eye pain or impaired vision.(4) UV rays can cause damage to your eyes.

• Acute impairment: sensation of having a foreign body in the eye, pain, flowing tears• Chronic impairment: cataract, etc.

• Never look directly at the light emitted from the LED UV unit with the naked eye. This can cause eye painor impaired vision. Be sure to wear the included safety glasses.

• Do not directly expose your skin to ultraviolet (UV) rays. This can cause skin inflammation.

• Contact of flammables with high temperature parts such as the LED UV unit may cause ignition or smoke.Also, leaving flammable items under the LED UV unit for several seconds may cause ignition or smoke.

• The glass on the underside of the LED UV unit must be handled with the provided gloves. Please do nottouch it with bare hands. Doing so may significantly degrade UV curing. If it gets dirty, wipe it using a cleangauze moistened with ethanol. (Do not wipe the outer cover with ethanol. This can cause the paint to comeoff.)

For Safe Operation

6

• Never use an LED UV unit or UV power supplies other than those recommended by us. Using productsbesides those recommended by us can cause fire or damage to the equipment. Malfunctions caused dueto the use of non-recommended products is out of the scope of warranty, and our company does notassume any responsibility for the same.

• Do not drop the glass components, bump them against things, use excessive force on them or scratchthem.

l Grounding Work

• When installing electrical outlets, grounding work is necessary to prevent electrocution accidents.• Carry out the grounding work.• Always perform grounding to prevent electrocution accidents.

l Installation Location and Operating Environment

• To prevent ignition of the ink, do not allow any open flames in the place where the unit is used.

• Be sure to install ventilation equipment if you are using this machine in a poorly ventilated or closed room.• This machine is not an explosion-proof type. Do not use it in hazardous atmosphere. There is a risk of

explosion.• Make sure to observe the following to prevent this machine from failure during exhaust port formation.

(1) Follow the regional EHS (Environmental, Health and Safety) guidelines of your country when installing the exhaustport.

(2) If you install a closure valve in the exhaust port, make sure to open the closure valve when using this machine.

• Do not use the machine in a flammable atmosphere (such as gasoline, flammable sprays, thinners,lacquers, dust, etc.). Doing so may cause fire or electric shocks.

• Do not bring paper or cloth close to the LED UV unit or cover LED UV unit with it. Doing so may cause fire.

• Do not use in areas with high humidity. Also, do not pour water on the unit. Doing so may cause fire,electric shocks or malfunctions.

• As far as possible, use this machine in a room that is not dusty.• This machine is not suitable for use in the presence of children.• This can cause dust to adhere to head and ink drops to drip. Perform head cleaning.• Keep this machine level.

l Do Not Climb on the Table

• Never climb on the table where the machine is placed. Doing so may cause the board surface accuracy togo wrong.

l Power supply and voltage

• This machine has parts that generate high voltage. Get the electrical work done only from a licensedelectrician.

For Safe Operation

7

• The included power cable set is for use with this machine only. It cannot be used with other electronicdevices. Also, please do not use any power cable set other than the one provided with this machine. Doingso may cause fire or electric shocks.

• Do not use extension cords. Doing so may cause fire or electric shocks.• If any kind of metal touches the edge of the power plug, it may cause fire or electric shocks.• Do not overload the electrical socket. Doing so may cause fire or electric shocks.• Do not use this machine when the power cable appears to be damaged or has exposed or broken core.

Continuing use in this state may cause fire or electric shocks. Please request the service center for a cablereplacement.

• Do not handle the power plug with wet hands. Doing so may cause electric shocks.• Make sure to hold the power plug properly when removing it. Pulling the power cable can damage it and

cause fire or electric shocks.• Do not use any voltage value other than the one indicated. Doing so may cause fire or electric shocks.• Do not use any power frequency other than the one indicated. Doing so may cause fire or electric shocks.

• Use this machine with the indicated power specifications. Also, make sure you plug the power cable into agrounded outlet. Doing so may cause fire or electric shocks.

• Be careful not to damage, break or treat the power cable. Also do not place any heavy object on the powercable, or heat or pull it. Doing so can cause it to break, resulting in fire or electric shocks.

• Only those familiar with the operation procedures of the machine should activate the main power switch.

l Power Supply

• Make sure the breaker is always on.

l Power Cable

• Use the included power cable.

l Disposal

• If you want to dispose of this machine, please contact your local distributor or service center. If you want todispose the machine by yourself, please contact an industrial waste processor.

• Give the waste ink or the ink bottles that you no longer to your local distributor or service center. If youwant to dispose of them by yourself, please contact an industrial waste processor or dispose themaccording to local regulations.

l Handling Vacuum

• Never disassemble or modify the vacuum. Also, do not touch the relief valve (pressure regulating valve) orblock the vacuum exhaust port. This can cause a decrease in suction force, heat generation ormalfunctions. (The vacuum is directly below the table.)

For Safe Operation

8

• Using this machine in a low temperature environment can sometimes cause the vacuum to emit a high-pitched sound, but this is not a malfunction.

l Anti freezing liquid

• Use our exclusive anti freezing liquid. Using any other anti freezing liquid can cause the cooling system tomalfunction. Malfunctions caused due to the use of other anti freezing liquids is out of the scope ofwarranty, and our company does not assume any responsibility for the same.

• Do not let the anti freezing liquid come in direct contact with your skin. If it comes in contact with your skin or clothing, immediately rinse with soap under running water. If you get the anti freezing liquid in your eyes, wash them with plenty of water and seek medical treatment.

• Make sure to read the Safety Data Sheet (SDS) before using the anti freezing liquid.• If you accidentally swallow the anti freezing liquid, immediately spit it out and seek medical treatment.• Be sure to not generate any sources of ignition such as static electricity and impact sparks.• If you accidentally touch hot anti freeze mixture, immediately rinse it off with soap and water, cool

adequately with ice water and seek medical treatment.• Use the following methods to dispose of unneeded anti freezing liquid.

(1) Absorb with sawdust or a rag and incinerate it(2) Explain the details of disposal to a licensed industrial waste processor and request for disposal

• When handling the anti freezing liquid, be sure to wear the included safety glasses and gloves.

• Store anti freezing liquid in a cool, dark place. Also, keep it out of reach of children.

l Do Not Disassemble or Remodel

• Never disassemble or modify this machine or ink bottle. Disassembling or modifying will result either inelectric shock or malfunction of this machine.

l Handling Media

• Do not leave the media set on the machine when returning home for the night. This can cause dust toadhere to the media.

• Use our recommended media to ensure stable and high-quality printing.• Be careful about the expansion and contraction of the media. Do not use media immediately after opening

the package. The media may expand or shrink depending on the temperature and humidity of the room.After opening the package, let the media sit for at least 30 minutes at the place of use before installing it inthe device.

• Do not use curled media. This not only causes media jams, but also affects image quality. Straighten themedia before using if it is severely curled. When storing coated fix-sized paper in rolls, make sure thecoated surface is on the outside.

• Keep the media away from dust. Wiping dust off the media creates static electricity, which has acounterproductive effect.

For Safe Operation

9

l Maintenance

• To prevent electric shocks during maintenance, always turn the main power switch off, and remove thepower plug. Depending on the device, the condenser may require one minute to discharge. After turningthe main power switch off and removing the power plug, wait three minutes before working.

• Never touch the areas around where high temperature caution plaques are affixed. Otherwise, you mayburn yourself. If you need to touch the high temperature area, wear heat-insulating gloves to protect yourhands.

• When cleaning the head, wiper or cap, be sure to wear the included safety glasses and gloves.

• Using this machine around water increases the chances of short circuiting. Avoid use in areas with water.A short circuit may result in the operator getting electrocuted or cause a fire.

• After many years of use, dirt and dust may accumulate in the conductive parts and insulated parts of thedevice, resulting in electricity leak. Clean such parts periodically.

• Do not spray compressed air on the machine. This can cause dirt and dust to scatter and penetrate theconductive parts, leading to malfunction. Always use a vacuum cleaner to suck up the dirt and dust.

• To prevent accidents, make sure to preform regular inspections and replacement of the parts that need tobe replaced periodically.

• This machine has parts that need regular replacement. We recommend you to get a maintenance contract.• After many years of use, dirt and dust may accumulate in the stabilizers and other used parts, increasing

the risk of ignition or smoke due to short circuits or deteriorated insulation. Please clean such partsperiodically and replace the parts determined to be deteriorated by the insulation resistance test

• After many years of use, the screws of the conductive parts may loosen, increasing the risk of ignition orsmoke. Please tighten them periodically.

Installation PrecautionsWhen installing this machine, take the following precautions.

• This machine should be installed in a dedicated private room, in a location where it can be reliably isolatedby physical means such as an enclosure. The isolated area should be set up so that no one can easilyreach the printer and ink supply unit.

• This isolated area should be prohibited for everyone except the trainees of our safety education programor those who have been trained by such a trainee. If an untrained person enters the restricted area while the machine is in operation, there is a risk ofaccidental contact with the Y-bar that is in the process of printing, resulting in injury.

• This machine should only be operated by the trainees of our safety education program or those who havebeen trained by such a trainee.

• Use the machine under the following environmental conditions. Operating environment: 15 to 30˚C (59 to 86˚F) 35 to 65% Rh (without condensation)Accuracy assurance temperature: 18 to 25°C (64.4 to 77°F)

For Safe Operation

10

• Places exposed to direct sunlight• Places that are not level• Places where vibrations occur• Places directly exposed to air flow from an air conditioner, etc.• Places where fire is used• Places with lots of dust• Places where there are chemicals

Warning Labels

11

Warning LabelsThe following warning labels are affixed to this machine. Fully understand the contents of the warning labels.If a warning label becomes illegible due to dirt or peels off, purchase a new one from your local distributor orour sales office.

Applied to thebottom of the bear.

Warning Labels

12

No. Order No. Label

1 M909381

2 M903330

3 M906115

4 M902663

5 M905980

6 M916117

7 M909385

8 M903281

Warning Labels

13

No. Order No. Label

9 M907935

Usage Restrictions

14

Usage Restrictions

Usage RestrictionsThis machine can be dangerous due to parts that move at high speeds, parts with high temperature and UVcuring units. This machine is to be used only by those having complete understanding of dangers associatedwith these parts.

User RestrictionsThis machine should only be operated by the trainees of our safety education program or those who havebeen trained by such a trainee.

Area Restrictions• Only adequately trained and versed individuals are allowed to come closer to the equipment. Set area

restrictions within the range shown in the following figure. As for the method of area restriction, themachine should be installed in a dedicated room, and it should be enclosed for everyone to understandthat it is a danger zone.

• The danger zone should be prohibited for everyone except the trainees of our safety education programor those who have been trained by such a trainee. If an untrained person enters the restricted area whilethe machine is in operation, there is a risk of accidental contact with the Y-bar that is in the process ofprinting, resulting in injury.

• Follow EN ISO23857 standards when securing the area with safety trellis.• When installing the setup in a dedicated room, install locks and interlocks on the door of the room, and

lastly conduct risk assessment at the installation site before use.

1000 mmor more

1000 mm or more

1000 mmor more

4450 mm

or more

1000 mm or more

6400 mm or more

Avoid These While Operating the Printer

15

Avoid These While Operating thePrinterDoing the things mentioned below when the printer is in operation might result in an injury.

l Do not put your hands or any object on the tableDo not put your hands on the movement channel of the carriage when the power is on. Also, do not put anything on the table other than the printing paper. Make sure that the thickness of the paper is 50 mm (1.97 inch) or less.

l Do not disturb the carriage operationDo not manually move the carriage during operation (during printing or cleaning). If the carriage is manuallymoved during operation, an operational error message is displayed.

l Do not put your hands or any object on the bearing partDo not put your hands, feet or any object on the Y-bar or on the bearing part on the right side of the mainbody.


16

l Be careful not to get your hands pinched in the gap between the Y-bar and thecarriage

There is a risk of a person getting handicapped due to crushing or shearing if their hands or other body partsget caught between the Y-bar and the carriage. Do not put your hands in the gap between the Y-bar and the carriage when the power is on.

l Be careful not to get your hands pinched in the gap between the carriage and thetable

Do not put your hands in the gap between the carriage and the table when the power is on.

l Do not put your hands or any object in the moving range of the carriageIf the carriage moves too fast, your hands may get caught in it.


17

l Keep your hands away from the Y-bar and the carriage when the power is onThere is a risk of hands getting crushed due to the movements of Y-bar and carriage. Keep your hands or other body parts away from this area and the printing range when the power is on.

l Be careful not to get your hands caught in the carriage or the maintenancestation portion

Do not put your hands in the carriage or the maintenance station portion.

l Be careful not to get your hands pinched in the gap between the Y-bar and thetable

Do not put your hands in the gap between the Y-bar and the table when the power is on.


18

l Be careful about belt winding malfunctionBe careful not to get your hands dragged into the Y-bar belt. There is a risk of hurting your hands or objects getting sucked.

l Do not place any object in front of the exhaust port of suction vacuumThe object may get deformed due to the heat released from the exhaust port.

l Do not crawl under the table when the power is onIt is extremely dangerous as you may get caught in the fixed parts or the movable parts under the table.

l Do not bring your hands anywhere near the rack gear and the motor cover underthe table

You may get your hands caught in the gears resulting in injury.


19

l Be careful not to accidentally press the key panel switch by mistakePressing this switch accidentally may cause sudden operation leading to an unexpected accident.

l Be careful not to look directly at the UV lightDo not directly look at the UV light.

• Be careful when your head and carriage are at the same level; for example when you are sitting on achair while working. Be particularly careful of UV light leakage when setting carriage and thick media.

• Be careful about UV light leakage at each of the following spots when printing. Edge of the tableBack side of the carriage (behind Y-bar)Top of the carriage part

Also, you may burn yourself from the LED UV unit and the parts around it, that have turned hot. Be carefulnot to touch.

l Wear safety glasses when using the machineIt is recommended to wear safety glasses when using the machine to prevent eye damage due to UV lightleakage.


20

l Pay attention to following when replacing the ink• To prevent the ink from sticking to your hands or eyes when it splashes, be sure to wear the included

safety glasses and gloves.• Do not pull the ink cover too much.

Pulling it too much might damage the tubes and cables.• Replace the ink bottle after cleaning the surroundings with a waste cloth, etc. The portion around the

bottle becomes dirty as the ink oozes from the float part.

l Wear safety glasses and gloves when performing maintenanceWhen performing maintenance such as ink replacement, be sure to wear the included safety glasses andgloves. Also, wear a gas mask if necessary.


21

Confirmation for agreement

I agree to make my employees take proper safety training course performed by

your company at installing this machine in accordance with the document "Safety

Precautions" (D203453) of this machine (JFX200-2513EX). I also agree that only

the employees who took the relevant safety training course or those who took

training from him/her can use this machine.

I agree to make my employees take proper safety training course performed by

your company at installing this machine in accordance with the document "Safety

Precautions" (D203453) of this machine (JFX200-2513EX). I also agree that only

the employees who took the relevant safety training course or those who took

training from him/her can use this machine.


22


23


24


25

JFX200-2513 Safety Precautions - MIMAKIForeword 1 Foreword Congratulations on your purchase of UV...

Documents

Transcript of JFX200-2513 Safety Precautions - MIMAKIForeword 1 Foreword Congratulations on your purchase of UV...