Jar Safety Clamps 2010
-
Upload
oswal-agusto-cabrera-pantoja -
Category
Documents
-
view
230 -
download
0
Transcript of Jar Safety Clamps 2010
-
8/2/2019 Jar Safety Clamps 2010
1/21
Drilling Products & Services
DROPS Forum
Double Acting HydraulicDrilling Hydra-Jar tool,Safety Clamp
Review April 2010
-
8/2/2019 Jar Safety Clamps 2010
2/21
Hydra-Jar tool
-
8/2/2019 Jar Safety Clamps 2010
3/21
Current
Toggle type Safety Clamp Shown (left) with bolts correctlyengaged
Ensure threads are clean prior to re-attachment
Torque retaining bolts to 200 ft/lbs Do not over tighten bolts Use AF socket size 1 7/8
Dog Bone type Safety ClampShown (left) with bolts correctly
engaged
Ensure threads are clean prior to
re-attachment Torque retaining bolts to 150 ft/lbs Do not over tighten bolts Use AF socket size 15/16
-
8/2/2019 Jar Safety Clamps 2010
4/21
Warning Labels
-
8/2/2019 Jar Safety Clamps 2010
5/21
Version 1
-
8/2/2019 Jar Safety Clamps 2010
6/21
Version 1 Trial T/O Prospect
-
8/2/2019 Jar Safety Clamps 2010
7/21
Version 2
-
8/2/2019 Jar Safety Clamps 2010
8/21
Version 3 Mods
Addition of Velcrostrapping assecondary safetyretention
Directional arrows onbody
Blanking of grip slots
Increase of scallopedarea around bolt atboth ends
-
8/2/2019 Jar Safety Clamps 2010
9/21
Version 4
Pin length shortened toallow the pin to bewithdrawn within thelength of the clamp
This enables the clampto be more rounded andtakes away theprotrusive overhang ofVersion 3
-
8/2/2019 Jar Safety Clamps 2010
10/21
Compression Loads
Clamp
Size
Compressive
Load of DogBone Clamp
Max. Load on Clamp when rackedwith Qty 2 Drill Collars above Jar
4 25,000 lbf 3,000 lbf
6 35,000 lbf 6,000 lbf
8 35,000 lbf 9,000 lbf
9 55,000 lbf 13,200 lbf
-
8/2/2019 Jar Safety Clamps 2010
11/21
Compression Load Test
Compressive Load Test carried out with the plastic clamp fitted to a6 OD Hydra-Jar in our jar test bed
90,000 lbf applied for 5 minutes with no signs of deformation of the clamp
-
8/2/2019 Jar Safety Clamps 2010
12/21
Compression Test
-
8/2/2019 Jar Safety Clamps 2010
13/21
Clamp Safe Retention Jacket
After discussions with Shell WellEngineers the concept of the
Clamp Safe retention jacketwas initiated
The first prototype was
manufactured and afterinspection and comment byboth Shell and Smith, a furtherClamp Safe retention jacketwas made to incorporate
modifications requested by bothparticipating parties for trial onSedco 711.
-
8/2/2019 Jar Safety Clamps 2010
14/21
Sedco 711 Trial
On Sedco 711 a 6 Hydra Jar
complete with plastic clamp andClamp Safe retention jacketwere racked in the derrick ontop of 2 x Drill Collars as is the
normal practice. The assembly was racked in the
derrick for 7 days, and wasinspected regularly for securityand safety.
This trial proved successful withno issues on either the plasticclamp or the Clamp Saferetention jacket.
-
8/2/2019 Jar Safety Clamps 2010
15/21
Fitting of Safety Clamp for Racking
Secure Hydra-Jartool in zip/slipsection
Place Safety Clampcarefully over
reduced diametermandrel
-
8/2/2019 Jar Safety Clamps 2010
16/21
Fitting of Safety Clamp for Racking
Ensure bolt threadsare clean prior to
attachment Ensure bolts are
correctly engaged
-
8/2/2019 Jar Safety Clamps 2010
17/21
-
8/2/2019 Jar Safety Clamps 2010
18/21
Clamp Safe Retention Jacket
Securely fit theretention jacket
around the safetyclamp
-
8/2/2019 Jar Safety Clamps 2010
19/21
Secure Bungee Fastening
Thread the bungee
cord loops throughthe ringlets andback over the plastic
bauble
-
8/2/2019 Jar Safety Clamps 2010
20/21
Velcro Fasten
Bring securing flapof cover over baubleties to match Velcro
halves together Press firmly over
length of jacket to
secure Jar now ready for
rack back
-
8/2/2019 Jar Safety Clamps 2010
21/21
Thank You
Any Questions?