Download With DAPDAP Link Checker Settings Nokia Jailbreak

RSS Twitter Facebook Youtube Google Plus

Antivirus NaviFirm NFE Core Editor Nokia Care Suite Nokia Icon Builder ScreenSaver SisWare Widgets

Home > How to > By Rajesh Patel

How to flash Nokia phone using JAF flashing tool

JAF flashing tool is another popular method after phoenix to flash Nokia Phones. There are lots of people who does not how to use JAF, so here we are going to guide you how to flash your phone using the JAF method.

Before Following how to use JAF method to flash Nokia device, you need to download firmware compatible for your phone.

Download Firmware for your Phone

partner-pub-67793 FORID:11 Submit

In order to download firmware for your phone you can use Nokia Firmware Editor utility. You can download it from here, after downloading extract the files. You will get several files, in which you have to open NokiaFirmwareEditorStd.exe.

Once NokiaFirmwareEditorStd.exe is opened click on “Download Firmware” button. It will ask you to enter the product code of your phone (to know the product code, open your phone dialer and type *#0000#, there you will get the product code).

Once you have enter the product code “Nokia Firmware Editor” will start downloading the firmware files on the computer. Once firmware is downloaded you can see it in the Nokia Firmware EditorLIGHT folder.

Now, you have to move these files to

“C:Program FilesNokiaPhoenix” (for Windows 32 bit users) “C:Program Files (x86)NokiaPhoenixProducts” (for Windows 64 bit users)

How to use JAF to Flash your Phone

1. Download   JAF 1.98.62 Package and Extract it on your computer. After extracting you will get JAF PKEY Emulator v3.exe and JAF Setup 1.98.62.exe files.

2. Install JAF Setup 1.98.62.exe on your computer (while installing, you will get few errors, ignore or skip them).

3. Open JAF PKEY Emulator v3.exe and under the “STEP 1“, select “Random PKEY Raskal SN“. And click on “GO” button (if you are trying to run JAF PKEY Emulator v3.exe on Windows 7 then you have to set Compatibility mode to XP SP3 and Run as Administrator).

4. Once you press GO button, it will automatically open J.A.F. You will get “Error: Box driver not installed“, click on OK button to launch JAF.

5. When J.A.F is launched, click on the BB5 Tab.

6. Under Flash Settings, click on “Manual Flash“, “Dead USB” and then “use INI“.

7. After selecting “Use INI“, it will automatically open a list of Phone Model. Select your Phone from the list and click on “OK” button.

8. You will see Green Light appears under Flash Settings (MCU, PMM, CNT). Which means J.A.F is ready to flash your phone. Now, Click on “Flash” Button to start flashing.

9. Now, it will give you a warning notification “Downgrading will kill the Phone”, igonore this warning and click on “YES” button to continue flashing.

10. Now, in the status erea you will see a message “Press Power on Now“. Which means you have to switch on your phone immediately, once you have switched on your phone and J.A.F has detected your phone you will see “Searching for phone…found” message in the status of J.A.F. Flashing will be continued.

11. Normally flashing will be completed in few minutes. Once flashing is completed you will see “Done” message in the Status of J.A.F. Your phone will be restarted automatically.

12. Now, remove the cable from phone. It will now show the local mode screen, as when you start your phone for the first time.

Now, you have learned to flash your phone with any firmware. If you want to reset your phone then read Hard/Soft reset Nokia phone.

We have created this tutorial with lots of hard work for those who want to learn how to flash their phone using J.A.F method. If you find this tutorial useful then we will love to hear your valuable comments, and dont forgot to share it with your friends.

inShare30

Related Posts

How to Flash Nokia N8

How to use Navifirm to download firmware

How to Fix Nokia OVI store if its not working

How to Jailbreak Nokia Belle FP1

How to Jailbreak Nokia Belle Refresh

How to Jailbreak Nokia N8

Related posts

{64 comments... read them below or add one}

1. James says:

June 3, 2012 at 9:03 am

Cool

Reply

2. ashwin thummar says:

June 25, 2012 at 11:29 am

hari om mobile jetpua

Reply

3. Rohan says:

June 26, 2012 at 10:40 pm

After starting JAF, when I click on ‘Use INI’, I can’t find my phone model i.e. RM-504 (Nokia 5530 XpressMusic). Any suggestions?

P.S. I did not use Nokia Firmware Editor. I am trying to install Symbian Anna v7.5 on my phone, and got the firmware from some other site.

Reply

o Rajesh Patel says:

July 8, 2012 at 1:20 am

Nokia 5530 XpressMusic is old Phone. So, the above JAF software does not support it. You have to find the JAF software which support your Phone.

Reply

chetan says:

June 26, 2013 at 6:12 am

download latest ini for jaf n it works ..!!!

Reply

4. Ashokkumar says:

July 7, 2012 at 7:48 am

wOW…..pretty awesome…i gonna be use use this tool…my phone was dead…let’s do with it….

Reply

5. Richard says:

August 29, 2012 at 1:47 am

Is Nokia firmware editor & navifirm the same, do they provide the same official firmware files?

Reply

6. Harshil says:

September 30, 2012 at 2:13 pm

hey how to get nokia s60v5 devide back to original firmware after flashing..?

Reply

7. Gaurav says:

October 16, 2012 at 8:53 am

after found the phone it shows that “unable to read init data”….What this!! plz solve it

Reply

8. sree says:

October 28, 2012 at 7:36 pm

After clicking flash.. jaf says “can’t backuo IMEI”

Reply

9. Honey the boy genius says:

November 6, 2012 at 6:27 am

Mail me at : shaheen.sharyar@gmail.comfbook: honey sharyar[choose timeline activated]Guys in here i have learned few steps/tips/tricks i always wanted to explore more out of more. The exact words i can explain in that i always wanted to get a program and use it for what it is not made for like “mkdosfs.com” is an ap for increasing/decreasing size of memory card and any data travler. But i thint we can use it for increasing the size of mobiles partition like rofs/rofs2.

Reply

10. Honey the boy genius says:

November 6, 2012 at 6:29 am

Mail me at : shaheen.sharyar@gmail.comfbook: honey sharyar[choose timeline activated]Guys in here i have learned few steps/tips/tricks i always wanted to explore more out of more. The exact words i can explain in that i always wanted to get a program and use it for what it is not made for like “mkdosfs.com” is an ap for increasing/decreasing size of memory card and any data travler. But i thint we can use it for increasing the size of mobiles partition like rofs/rofs2.Please

Reply

11. Nass says:

November 26, 2012 at 5:24 am

after all this procedure … phone won’t restart .. i think it’s irreparable.

Reply

12. dilly85 says:

December 1, 2012 at 3:38 pm

I can not find the “product code” code in Nokia 5230 RM588. When used *#0000# it doesn’t output the product code but everything else!Firmware: “V 51.0.002″ & Language Set: 01

Reply

13. ikhmal says:

December 9, 2012 at 11:31 pm

hope it will go

Reply

14. bege says:

December 16, 2012 at 1:39 am

After the flashing the local mode screen was frozen. It was not even possible to switch the phone off. Taking out the battery and putting it in again solved the problem. The phone started perfectly.Thank you for the tutorial.

Reply

15. monu kumar says:

December 17, 2012 at 6:56 pm

i can’t found my model nokia c2 00in phone modeland nokia firmware editor cannot found my codemy code is 059H0T3please help me.my email id ismonu.mkskumar@gmail.com

Reply

16. monu kumar says:

December 17, 2012 at 10:52 pm

i download my nokia firmware and paste it in phoenixbut still i can’t find my model in jaf what i do?

Reply

17. bravo says:

December 18, 2012 at 6:51 pm

When I select manual flash in jaf I can’t access mcu files.pls help

Reply

18. sujeevan says:

December 26, 2012 at 10:35 am

Searching for default location of ini…Checking path: ProductsRM-240Searching for JAF saved location of ini…Checking path: C:Program FilesNokiaPhoenixProductsRM-240Scanning ini files…Searching for default location of ini…Checking path: ProductsRM-240Checking path: C:Program FilesNokiaPhoenixProductsRM-240FILES SET FOR FLASHING:MCU Flash file: C:Program FilesNokiaPhoenixProductsRM-240rm240__10.00.mcuswPPM Flash file: C:Program FilesNokiaPhoenixProductsRM-240rm240__10.00.ppm_cCNT Flash file: C:Program FilesNokiaPhoenixProductsRM-240rm240__10.00_ism_019.image_c_alsAPE Variant file: NONELanguages in ppm: English,German,French,Italian,Dutch,Spanish,Turkish,PortugueseBacking up CRT…Detected P-KEY: 9000AAC9P-key nokia module version 01.02Init usb communication…Reading IMEI…Failed! Aborting!Failed to backup CRT…Detected P-KEY: 9000AAC9P-key nokia module version 01.02Init usb communication…PRESS POWER ON NOW!

Searching for phone…FoundSending RAW loader…Using 06.02.002Elf2flash 07.14.000CMT RAW loader…Patching RAW boot step1…Patching RAW boot step3…Sending RAW Loader………………….Loader Sent!Stage 2 starting…………………………………………………………………Loader Sent!Stage 3 starting………………Phone prepared OK!Waiting for the phone to boot…Searching for phone…Phone failed to boot in flash mode CMT…how to solve this problem

Reply

o Ashu says:

May 26, 2013 at 8:10 am

You Should install Nokia PC Suite First Before flashing

Reply

bhas says:

October 16, 2013 at 6:56 pm

actually while updating with phoenix,my pc got crashed and restated unfortunately and from then onwards, it fails to refurbish the phone. even when i tried with jaf,and with above method, but it saysPhone failed to boot in flash mode CMT…what can i do get my phone back.

Reply

19. hardy says:

February 16, 2013 at 11:19 am

why my phone X6-00 don’t have product code ??

Reply

20. jay kay says:

February 17, 2013 at 2:55 am

I can not find the “product code” ….

Reply

21. Dave says:

February 20, 2013 at 1:30 pm

will this erase data on Lumia 610 ?

Reply

22. bueyo says:

March 15, 2013 at 7:37 pm

hello,

i tried the app, but my phone is not listed.i have the nokia mobile E6-00.

thanks for your help.

Reply

23. FrozenPeaFund.com says:

April 4, 2013 at 2:17 am

When I initially commented I clicked the “Notify me when new comments are added” checkbox and now eachtime a comment is added I get several e-mails withthe same comment. Is there any way you can remove me from that service?Thanks!

Reply

24. Vishal says:

April 5, 2013 at 12:52 pm

I cant see my model 5233 when i tick “use ini” and even the note “BOX DRIVER NOT INSTALLED” does not apper when i click on GO. Please help me bro….

Reply

25. notKnow says:

April 7, 2013 at 1:30 pm

Will this clear the contact service problem

Reply

26. darkrevolution.org says:

April 18, 2013 at 10:36 am

Whats up very cool web site!! Man .. Beautiful .. Wonderful .. I will bookmark your site and take the feeds additionally?I am glad to search out so many useful info right here within thepost, we need develop more strategies onthis regard, thank you for sharing. . . . . .

Reply

27. ghostryda says:

April 30, 2013 at 8:40 am

i cant get any settings on my lumiar 610

Reply

28. ghostryda says:

April 30, 2013 at 8:41 am

how do i get started with synchronising my lumiar 610 to my pc

Reply

29. ZIZOO says:

May 4, 2013 at 6:54 pm

I CANT FIND MY PHONE NOKIA E7

Reply

30. http://cameras.about.com/b/2012/12/31/new-article-explains-how-to-use-iso.htm says:

May 18, 2013 at 11:16 pm

Wow that was odd. I just wrote an extremely long comment but afterI clicked submit my comment didn’t show up. Grrrr… well I’m not writing all that over again.

Anyhow, just wanted to say wonderful blog!

Reply

31. Prince says:

May 19, 2013 at 4:42 pm

After selecting “Use INI“, it will automatically open a list of Phone Model.But doesn’t include my phone model i.e., nokia C5 whats the problem … ?

Reply

32. martins says:

May 30, 2013 at 8:30 pm

It did not include my phone model after I selected ‘USE INI’. Nokia x2-oo and asha 200; pls help. Thnx

Reply

33. reverse hotmail says:

May 31, 2013 at 4:07 pm

I’m truly enjoying the design and layout of your website. It’s a very easy on the eyeswhich makes it much more pleasant for me to comehere and visit more often. Did you hire out adeveloper to create your theme? Fantastic work!

Reply

34. Anshit says:

June 11, 2013 at 6:19 am

when i press use ini jaf not showing any device

Reply

35. isaya geogre mpembelele says:

June 13, 2013 at 7:54 pm

i need help

Reply

36. mohit says:

June 16, 2013 at 9:47 am

Powering JCOP simulator …ERROR: JCSIMU_open_socket connect socket: 10013ERROR: JCSIMU_reset_card initializeERROR: Cannot get ATR from JCOP simulator!

Getting this error in pkeyPlease solve

Reply

37. susan says:

June 16, 2013 at 8:35 pm

hiii..guys.here i got problemm with my nokia expressmusic. i need to flash it. so to get data package downloaded do i need to use my phone product code only or wt??? cuz when im using my product code in phoenix its showing server couldn’t find product code… so wt to do???guys plzz help me out… u will be highly appreciated for ur great help.

Reply

38. Rohit says:

June 17, 2013 at 5:46 am

Thnx.. Bro for your help.

Reply

39. RUPENDERA says:

July 18, 2013 at 3:48 am

JAF version 1.98.62Detected PKEY: 9000AAC9Card life counter: 99.99%P-key nokia module version 01.02FBUS INTERFACE NOT CONNECTED!!!USB Cable Driver version: 7.1.172.0Changing mode…Done!FILES SET FOR FLASHING:MCU Flash file: NONEPPM Flash file: NONECNT Flash file: NONEAPE Variant file: NONESearching for JAF saved location of ini…Checking path: C:\Program Files\Nokia\Phoenix\Products\\

Searching for default location of ini…Checking path: \Products\\Searching for JAF saved location of ini…Checking path: C:\Program Files\Nokia\Phoenix\Products\\No ini files found…FILES SET FOR FLASHING:MCU Flash file: NONEPPM Flash file: NONECNT Flash file: NONEAPE Variant file: NONESearching for JAF saved location of ini…Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\

Searching for default location of ini…Checking path: \Products\RM-356\Searching for JAF saved location of ini…Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\No ini files found…FILES SET FOR FLASHING:MCU Flash file: NONEPPM Flash file: NONECNT Flash file: NONEAPE Variant file: NONESearching for JAF saved location of ini…Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\

Searching for default location of ini…Checking path: \Products\RM-356\Searching for JAF saved location of ini…

Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\No ini files found…FILES SET FOR FLASHING:MCU Flash file: NONEPPM Flash file: NONECNT Flash file: NONEAPE Variant file: NONESearching for JAF saved location of ini…Checking path: C:\Program Files\Nokia\Phoenix\Products\\

Searching for default location of ini…Checking path: \Products\\Searching for JAF saved location of ini…Checking path: C:\Program Files\Nokia\Phoenix\Products\\No ini files found…FILES SET FOR FLASHING:MCU Flash file: NONEPPM Flash file: NONECNT Flash file: NONEAPE Variant file: NONESearching for JAF saved location of ini…Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\

Searching for default location of ini…Checking path: \Products\RM-356\Searching for JAF saved location of ini…Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\Scanning ini files…Searching for default location of ini…Checking path: \Products\RM-356\Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\FILES SET FOR FLASHING:MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.core.C00PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.rofs2.V19CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_C01_prd.rofs3.fpsxAPE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.001_026_000_U01.uda.fpsxLanguages in ppm: English,Philipines,Bangladesh,Australia,Indonesia,India,Vietnam,New ZealandDetected P-KEY: 9000AAC9P-key nokia module version 01.02Init usb communication…PRESS POWER ON NOW!

Searching for phone…FoundError reading phone init data…Detected P-KEY: 9000AAC9P-key nokia module version 01.02Init usb communication…PRESS POWER ON NOW!Searching for phone…FoundError reading phone init data…Detected P-KEY: 9000AAC9P-key nokia module version 01.02Init usb communication…PRESS POWER ON NOW!Searching for phone…FoundSending RAW loader…Using 009.012.005Elf2flash 09.11.000CMT RAW loader…Patching RAW boot step1…Patching RAW boot step2…Patching RAW boot step3…Sending RAW Loader…………………..Loader Sent!Stage 2 starting………………PUBKEYS already sent…PUBKEYS already sent…PUBKEYS already sent…PUBKEYS already sent…PUBKEYS already sent…………..Phone prepared OK!Waiting for the phone to boot…Searching for phone…Status byte: 8000Selecting CMT flash…Result: 0000Phone is in flash mode…CMT blocks: 615, APE blocks: 0Erasing cmt…Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.core.C00…Erasing cmt zone 00040000 – 00082FFF … Erase result: 0000Erasing cmt zone 00083400 – 003FFFFF … Erase result: 0000Erasing cmt zone 00400000 – 007FFFFF … Erase result: 0000Erasing cmt zone 00800000 – 00D5FFFF … Erase result: 0000Erasing cmt zone 00D60000 – 09E5FFFF … Erase result: 0000Partition result: 0014Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.rofs2.V19…

Erasing cmt zone 07180000 – 0915FFFF … Erase result: 0000Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_C01_prd.rofs3.fpsx…Erasing cmt zone 09160000 – 09E5FFFF … Erase result: 0000Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.001_026_000_U01.uda.fpsx…Erasing cmt zone 09E60000 – 0F71FFFF … Erase result: 0000Send CMT CFG…

Writing cmt…Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.core.C00…Sending CMT HASH for ADASending CMT HASH for KEYSSending CMT HASH for PRIMAPPSending CMT HASH for RAP3NANDSending CMT HASH for PASUBTOCcmt->PAPUB_CERTIFICATE_DATA_BB5 block detectedcmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending…cmt->PAPUB keys already sent…cmt->PAPUB keys already sent…cmt->PAPUB keys already sent…cmt->PAPUB keys already sent…Sending CMT HASH for SOS*UPDAPPSending CMT HASH for SOS*ENOSending CMT HASH for SOS*DSP0Sending CMT HASH for SOS*ISASWSending CMT HASH for SOS+CORESending CMT HASH for SOS+ROFS1Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_prd.rofs2.V19…Sending CMT HASH for SOS+ROFS2Write result 27: 1701Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.003_C01_prd.rofs3.fpsx…Sending CMT HASH for SOS+ROFS3Write result 27: 1701Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_60.0.001_026_000_U01.uda.fpsx…Rebooting…Finishing CMT session…Restarting CMT…Pooling phone…MCUSW: V ICPR72_10w29_tube124-05-11RM-356

(c) NokiaAPESW: V 60.0.003VariantSW: V 60.0.003Prodcode: 059B9L7Done!

Reply

40. what is psoriasis says:

July 19, 2013 at 12:39 pm

One particular of the main variables that result in substantial damage to our skin cells is exposure toultraviolet radiation of the sun.

Reply

41. Low Carb Side Dishes says:

July 19, 2013 at 7:43 pm

But, then as you have limited alternatives for a no-carb breakfast menu, you cantake into account these as breakfast options.

Reply

42. Aris says:

July 20, 2013 at 5:59 am

Great wrk!

Reply

43. VAIBHAV says:

July 26, 2013 at 12:10 am

SEARCHING FOR PONE NOT FOUND

Reply

44. VAIBHAV says:

July 26, 2013 at 12:11 am

PLZ HELP

Reply

45. aLdRyNo says:

July 28, 2013 at 3:21 am

Amazing… Please upload another method also… Thank you ma friend…

Reply

46. salman says:

July 31, 2013 at 4:11 am

While flashing , JAF says that -” Error getting Flash id ”

How can i solve it ?

Reply

47. RAJASEKHAR CHOWDARY says:

August 7, 2013 at 7:44 am

Sir Please help me when iam flashing my mobile nokia 5233 rm 625 with rack star belle with the help of jaf tool nokia 5233 is not in list

Reply

48. kishan says:

August 18, 2013 at 4:32 am

hi,I want 2 flash my phone nokia c2-00 and i m not getting the model no of my phone.I was flashing using JAF Setup 1.98.6.—–plz help me——-

Reply

49. Aseem Kashyap says:

September 5, 2013 at 1:59 am

Plzz..I need help. M a newbe.. here.I bricked my n96 rm 247 & nw m getting error ” failed to startup . Contact reseller”. I think flashing eno file for my device will solve the problem as the internal memory might have got corrupt.I hav downloaded the eno file but m unable to select it in the MCU window of bb5 (jaf) as it accepts only .c0r file and not fbsx file which I have. ..Please guide me what ( & how ) it should be done.

Reply

50. chirag mehta says:

September 7, 2013 at 7:25 am

sir I have an error in step 8 the green light is not on after i entered my model no.What i want to do. pls help me

Reply

51. david says:

October 12, 2013 at 3:26 pm

i cannot find x3-02 on the mobile phones listed.. HELP ASAP

Reply

52. Diky says:

October 15, 2013 at 12:43 pm

hey man this program cannot to find my phonr nokiax6 rm-559 how i do ?

Reply

53. LOIS^GENTILITY says:

November 5, 2013 at 7:52 am

Excellent””I love it!

Reply

54. Razvan says:

November 14, 2013 at 10:16 pm

do not work for asha 200 RM-761 I cannot find it to select INI model ..anyone know anything how to do with this model of nokia 200

Reply

55. vinay says:

January 19, 2014 at 12:26 pm

plz help me guys…….. my nokia n8 was dead. i tried to make it alive by using pheonix, jaf ,and also nokia care suite.but those weren’t worked out.when flashing with jaf, usb not detecting my phone. plz help me

Reply

56. Yash says:

February 19, 2014 at 2:50 pm

I’m wondering does it needs any hardware or smthing? or i could use it with the simple nokia usb ?

Reply

57. sagardas says:

February 27, 2014 at 8:40 am

In jaf i don’t find nokia 5230 or 5233 wht can i do ?

Reply

58. Mala says:

March 22, 2014 at 2:08 pm

My phone model nokia asha 200 was nt found

Reply

59. alim khan says:

June 29, 2014 at 5:04 am

go to google and search for latest jaf_nok4models.ini file and download it and copy to c://progam files/odeon/jaf.after that open jaf tool and you can see the newer version of phone models in the list.

Reply

Leave a Comment

Name (required)

Mail (will not be published) (required)

Website

Notify me of follow-up comments by email.

Notify me of new posts by email.

Popular:

Section:

© 2012 Nokia Jailbreak. All rights reserved. <a href="http://www.histats.com" target="_blank"><img src="http://sstatic1.histats.com/0.gif?2251546&101" alt="website free tracking" border="0"></a>

Submit Comment 467 0

41d539a7e9

1405273010052