Jabsco Marine Product Guide 2006.

Local Distributor Local Dealer

Jabsco & Rule, 1 Kondelin Road, Cape Ann Industrial Park, Gloucester, MA 01930Tel: +1 978 281 0440 Fax: +1 978 283 2619 USA

Jabsco & Rule, Bingley Road, Hoddesdon, Hertfordshire EN11 0BUTel: +44 (0) 1992 450 145 Fax: +44 (0) 1992 467 132 UK

Fluid Products Canada, 55 Royal Road, Guelph, Ontario N1H 1T1Tel: +1 519 821 1900 Fax: +1 519 821 2569 CANADA

NHK Jabsco Co Ltd, 3-21-10, Shin-Yokohama, Kohoku-ku, Yokohama 222Tel: +81 (0) 45 475 8906 Fax: +81 (0) 45 475 8908 JAPAN

Jabsco GmbH, Oststraße 28, 22844 NorderstedtTel: +49 (0) 40 53 53 73 0 Fax: +49 (0) 40 53 53 73 11 GERMANY

Jabsco Marine Italia S.r.l., Via Tommaseo, 6, 20059 Vimercate, MilanoTel: +39 039 6852323 Fax: +39 039 666307 ITALY

Warranty: All products of the company are sold and all services of the company are offered subject to the company’s warranty and terms and conditions of sale, copies of which will be furnished upon request

Jabsco, Rule and Danforth have

served the world's marine market

for well over half a century,

when the Flexible Impeller pump

was invented in the 1930's.

Today Jabsco, Rule and Danforth are

part of ITT Corporation. ITT

Corporation (www.itt.com) supplies

advanced technology products and

services in key markets including:

fluid and water management;

electronic interconnects and

switches; defense communications,

opto-electronics, information

technology and services and other

specialty products. Headquartered

in White Plains, New York, the

company generated $7.4 billion

revenue in 2005.

Cover photos courtesy of Fairline Boats plc and Cruiser Yachts: www.cruiseryachts.com

Discover Jabsco at www.jabsco.com

Discover us on the World Wide Webwww.jabsco.com www.danforthcompasses.com www.rule-industries.com www.jabsconews.com

Find comprehensive details on all

our products including their

technical specifications. The site

gives you 24 hour access to all the

information you need, faster,

cheaper and at a time that suits you.

• Comprehensive Search facility to speed uplocation of the required product.

• Get full technical data by clicking through thelinks for each category and product area.

• Many exploded diagrams are available to assist in identifying parts.

• All technical data sheets in PDF format fordownloading.

• Plus the new multi-language Jabsconews.comcontaining the very latest new productinformation and downloads data.

MarineProduct Guide

13. Pressurised 0.6 LitreAccumulator Tank

8. Jabsco 1.9 Water Pressure PumpFlow rates up to 7 lpm (1.9 US gpm). Serves up to 2outlets.

▼ 31295-0292 1.9, 12 Volt dc, 25psi shut-off.

9. Jabsco 1 Water Pressure PumpEven our miniature model is a quiet, self-priming, dry running, dual chamberdiaphragm pump, with thermal overloadprotection. Designed for use with 10mm(3/8”) id hose and faucets, it serves up to 2outlets, or 1 outlet if adapted to 13mm (1/2”)id hose.

▼ 42630-2900 1, 12 Volt dc, 35psi shut-off.

▼ 42631-2900 1, 12 Volt dc, manual on/off.

36900, 36800, 36950 Water Pressure PumpsThe original PAR diaphragm water pressurepumps. Highly reliable, belt driven pumpswith built-in pulsation dampeners andflexible mounts for noise and vibrationreduction. All three models can run dry.

10. 36900 Water Pressure PumpFlow rates up to 16 lpm (4.2 US gpm).

▼ 36900-0200 12 Volt dc, 25psi shut-off.

11. 36800 Water Pressure PumpFlow rates up to 12.5 lpm (3.3 US gpm).

Pre-pressurisedAccumulator TanksUnless you have a Variable Speed Drive pump an accumulator tank will improve anypressure switch controlled water system bysmoothing water flow and reducing on/offcycling of the pump. Jabsco accumulatortanks are maintenance free and can bemounted in any attitude, thanks to theirinternal membrane.

13. Pre-pressurised 0.6 LitreAccumulator TankOur NEW mini accumulator tank fits into those tight spaces!

▼ 30573-0003 0.6 litre (21 fl.oz).

14. Pre-pressurised 1 LitreAccumulator TankJust the right size for use with Jabsco 4 & 3pressure pumps.

▼ 30573-0000 1 litre (1 US quart).

Pumpgards™These compact pre-filters prevent particles jammingvalves and causing pump breakdowns. We’ve giventhem a screw off, transparent housing for easyinspection and quick, in place cleaning.

▼ 46400-0014 90° model for 13mm (1/2") femalethreads inlet, direct plug into JabscoWPS inlet port.

▼ 46400-0010 90° model for 19mm (3/4") hose inlet, direct plug into Jabsco WPS inlet port.

▼ 46400-0012 90° model for 13mm (1/2") hose inlet,direct plug into Jabsco WPS inlet port

▼ 46400-0004 Inline model for 13mm (1/2") femalethreads.

▼ 46400-0000 Inline model for 19mm (3/4") id hose.

▼ 46400-9500 90° model for snap-in port and directplug into Jabsco WPS inlet port.

Aqua Filta™Safe drinking water is not necessarily pleasant todrink. An activated carbon water filter lets you enjoyyour drinks without the need to carry bottled water.Aqua Filta’s 180º rotating ports allow for moreversatile installation, but most importantly we’vemade the annual replacement cheaper, easier andneater. Replacement is a simple job of changing acartridge, which is half the cost of a new unit!Internal valving means you don’t need to drain thesystem down for replacement either!

▼ 59000-1000 Aqua Filta.

▼ 59100-0000 Replacement Cartridge.

Jabsco 7.5 & 6 Sensor VSDWater Pressure PumpsTwo NEW high output pumps have beenadded to the Sensor Max series of VariableSpeed Drive pumps. VSD pumpsautomatically adjust their output to matchdemand, whilst maintaining smooth flow andconstant pressure. This eliminates any needfor an accumulator tank. We include aPumpgard™ pre-filter and a selection ofquick-connect fittings for ease of installation.

1. Jabsco 7.5 VSDConstant pressure flow rates up to 29 lpm (7.5 US gpm). Serves 6 or more outlets.

2. Jabsco 6 VSDConstant pressure flow rates up to 23 lpm (6 US gpm). Serves 5 or more outlets.

Jabsco 4 & 3 Sensor VSDWater Pressure PumpsJust like the new higher ouput models describedabove, these award winning pumps offer all thebenefits of Variable Speed Drive technology. Theyare exceptionally quiet running at typical outputs, as they automatically adjust their output to matchdemand. An accumulator tank is totally unnecessary.We include a Pumpgard™ pre-filter and a selectionof quick-connect fittings for ease of installation.

3. Jabsco 4 VSDConstant pressure flow rates up to 17 lpm (4.5 US gpm). Serves 4 or more outlets.

▼ 31755-0200 4, 12/24 Volt dc, 30psi shut-off.

Photo: Cruiser yachts: www.cruiseryachts.com

Jabsco 4 & 3 Water Pressure PumpsThese two conventionally pressure switchcontrolled pumps enjoy the same pulsationfree four chamber diaphragm design andlong life motors as our Jabsco 4 & 3 VSDmodels. Like all Jabsco water pressure pumpsthey are inherently quiet, self-priming andcan run dry without damage. Quick-connectfittings are included.

5. Jabsco 4 Water Pressure PumpFlow rates up to 17 lpm (4.5 US gpm). Serves 4 ormore outlets.

▼ 31600-0294 3, 24Volt dc, 25psi shut-off.

Jabsco 2.9 & 1.9 Water Pressure PumpsThe NEW 2.9 & 1.9 models offer attractivelypriced solutions for craft with up to 3 hotand cold outlets, such as galley sink, handbasin and shower. The self-priming, dryrunning, three chamber diaphragm designhas a built-in bypass that gives smoothpulsation free flow, even at lower outputs,making an accumulator tank inessential. Thequiet running motor is protected by athermal overload cut-out, just like our moreexpensive models, and, of course, quick-connect fittings are included.

7. Jabsco 2.9 Water Pressure PumpFlow rates up to 11 lpm (2.9 US gpm). Serves up to3 outlets.

Water Pressure SystemsAll the convenience of your ‘at home’ water supply

5. Jabsco 4

7. Jabsco 2.9

6. Jabsco 3

8. Jabsco 1.9

9. Jabsco 1

W A R N I N GDO NOT use any Jabsco pump for petrol,petroleum products or any products with aflash point below 37°C (98°F).

14. Pressurised 1 LitreAccumulator Tank

11. 36800

16. 46400-0010

15. 46400-0014

17. 46400-0012

18. 46400-0004

19. 46400-0000

21. 46400-9500

20. 46400-0002

10. 36900

12. 36950

23. Aqua Filta™Replacement Cartridge

22. Aqua Filta™

3. Jabsco 4 VSD

4. Jabsco 3 VSD

1. Jabsco 7.5 VSD

2. Jabsco 6 VSD

A modern marine pressurised water system issimple, quiet, easy to maintain and provideshot or cold water at the turn of a tap. It's alsoversatile enough to provide full flow or atrickle according to need.

Diaphragm pumps provide a quiet smoothflow of water with good pressure and aresuitable for boats up to 20m (65ft) - simplychoose a model suitable for the number ofoutlets on your boat.

Most systems benefit from an accumulatortank to absorb pressure fluctuations andvibrations (which shorten pump life) and alsoto give better control of hot water systems.

A new alternative to regular water pressuresystems is to fit a sensor controlled pumpwhere motor speed is electronically regulatedto maintain steady flow and constantpressure eliminating the need for standardpressure switch control or accumulator tank.

22-23.

15-21.

13. Pressurised 0.6 LitreAccumulator Tank

8. Jabsco 1.9 Water Pressure PumpFlow rates up to 7 lpm (1.9 US gpm). Serves up to 2outlets.

9. Jabsco 1 Water Pressure PumpEven our miniature model is a quiet, self-priming, dry running, dual chamberdiaphragm pump, with thermal overloadprotection. Designed for use with 10mm(3/8”) id hose and faucets, it serves up to 2outlets, or 1 outlet if adapted to 13mm (1/2”)id hose.

▼ 42631-2900 1, 12 Volt dc, manual on/off.

36900, 36800, 36950 Water Pressure PumpsThe original PAR diaphragm water pressurepumps. Highly reliable, belt driven pumpswith built-in pulsation dampeners andflexible mounts for noise and vibrationreduction. All three models can run dry.

10. 36900 Water Pressure PumpFlow rates up to 16 lpm (4.2 US gpm).

Pre-pressurisedAccumulator TanksUnless you have a Variable Speed Drive pump an accumulator tank will improve anypressure switch controlled water system bysmoothing water flow and reducing on/offcycling of the pump. Jabsco accumulatortanks are maintenance free and can bemounted in any attitude, thanks to theirinternal membrane.

13. Pre-pressurised 0.6 LitreAccumulator TankOur NEW mini accumulator tank fits into those tight spaces!

▼ 30573-0003 0.6 litre (21 fl.oz).

14. Pre-pressurised 1 LitreAccumulator TankJust the right size for use with Jabsco 4 & 3pressure pumps.

▼ 30573-0000 1 litre (1 US quart).

Pumpgards™These compact pre-filters prevent particles jammingvalves and causing pump breakdowns. We’ve giventhem a screw off, transparent housing for easyinspection and quick, in place cleaning.

▼ 46400-0014 90° model for 13mm (1/2") femalethreads inlet, direct plug into JabscoWPS inlet port.

▼ 46400-0010 90° model for 19mm (3/4") hose inlet, direct plug into Jabsco WPS inlet port.

▼ 46400-0012 90° model for 13mm (1/2") hose inlet,direct plug into Jabsco WPS inlet port

▼ 46400-0004 Inline model for 13mm (1/2") femalethreads.

▼ 46400-9500 90° model for snap-in port and directplug into Jabsco WPS inlet port.

Aqua Filta™Safe drinking water is not necessarily pleasant todrink. An activated carbon water filter lets you enjoyyour drinks without the need to carry bottled water.Aqua Filta’s 180º rotating ports allow for moreversatile installation, but most importantly we’vemade the annual replacement cheaper, easier andneater. Replacement is a simple job of changing acartridge, which is half the cost of a new unit!Internal valving means you don’t need to drain thesystem down for replacement either!

▼ 59000-1000 Aqua Filta.

▼ 59100-0000 Replacement Cartridge.

Jabsco 7.5 & 6 Sensor VSDWater Pressure PumpsTwo NEW high output pumps have beenadded to the Sensor Max series of VariableSpeed Drive pumps. VSD pumpsautomatically adjust their output to matchdemand, whilst maintaining smooth flow andconstant pressure. This eliminates any needfor an accumulator tank. We include aPumpgard™ pre-filter and a selection ofquick-connect fittings for ease of installation.

1. Jabsco 7.5 VSDConstant pressure flow rates up to 29 lpm (7.5 US gpm). Serves 6 or more outlets.

2. Jabsco 6 VSDConstant pressure flow rates up to 23 lpm (6 US gpm). Serves 5 or more outlets.

Jabsco 4 & 3 Sensor VSDWater Pressure PumpsJust like the new higher ouput models describedabove, these award winning pumps offer all thebenefits of Variable Speed Drive technology. Theyare exceptionally quiet running at typical outputs, as they automatically adjust their output to matchdemand. An accumulator tank is totally unnecessary.We include a Pumpgard™ pre-filter and a selectionof quick-connect fittings for ease of installation.

Jabsco 4 & 3 Water Pressure PumpsThese two conventionally pressure switchcontrolled pumps enjoy the same pulsationfree four chamber diaphragm design andlong life motors as our Jabsco 4 & 3 VSDmodels. Like all Jabsco water pressure pumpsthey are inherently quiet, self-priming andcan run dry without damage. Quick-connectfittings are included.

▼ 31600-0294 3, 24Volt dc, 25psi shut-off.

Jabsco 2.9 & 1.9 Water Pressure PumpsThe NEW 2.9 & 1.9 models offer attractivelypriced solutions for craft with up to 3 hotand cold outlets, such as galley sink, handbasin and shower. The self-priming, dryrunning, three chamber diaphragm designhas a built-in bypass that gives smoothpulsation free flow, even at lower outputs,making an accumulator tank inessential. Thequiet running motor is protected by athermal overload cut-out, just like our moreexpensive models, and, of course, quick-connect fittings are included.

7. Jabsco 2.9 Water Pressure PumpFlow rates up to 11 lpm (2.9 US gpm). Serves up to3 outlets.

Water Pressure SystemsAll the convenience of your ‘at home’ water supply

5. Jabsco 4

7. Jabsco 2.9

6. Jabsco 3

8. Jabsco 1.9

9. Jabsco 1

14. Pressurised 1 LitreAccumulator Tank

11. 36800

16. 46400-0010

15. 46400-0014

17. 46400-0012

18. 46400-0004

19. 46400-0000

21. 46400-9500

20. 46400-0002

10. 36900

12. 36950

23. Aqua Filta™Replacement Cartridge

22. Aqua Filta™

3. Jabsco 4 VSD

4. Jabsco 3 VSD

1. Jabsco 7.5 VSD

2. Jabsco 6 VSD

A modern marine pressurised water system issimple, quiet, easy to maintain and provideshot or cold water at the turn of a tap. It's alsoversatile enough to provide full flow or atrickle according to need.

Diaphragm pumps provide a quiet smoothflow of water with good pressure and aresuitable for boats up to 20m (65ft) - simplychoose a model suitable for the number ofoutlets on your boat.

Most systems benefit from an accumulatortank to absorb pressure fluctuations andvibrations (which shorten pump life) and alsoto give better control of hot water systems.

A new alternative to regular water pressuresystems is to fit a sensor controlled pumpwhere motor speed is electronically regulatedto maintain steady flow and constantpressure eliminating the need for standardpressure switch control or accumulator tank.

22-23.

15-21.

1. Rule 360

2. Rule 500

3. Rule 800

5. Rule 1500

4. Rule 1100

11. RuleAutomatic 3700

6. Rule 2000

2. Rule-Mate® 750

4. Rule-Mate® 1500

5. Rule-Mate® 2000

9. Rule Automatic 1500

3. Rule-Mate® 1100

7. Rule 3700

11. ReplacementMotor Cartridge

9. Rule Gold Series

8. Rule 4000

10. Rule Cartridge Pumps

1. Rule-Mate® 500Bilge Pumping SystemsDoesn't your boat deserve proper protection?

Traditional non-automatic bilge pumps areoperated by the use of a control switch tosense water and activate the pump.A selection of control and panel switchesavailable can be found on the Bilge Switchesand Controls page.

1. Rule 360The Rule 360 provides outstanding quality andvalue. It is economically priced and designed forsmall boats. 19mm (3/4") discharge outlet. 1400 lph(360 US gph) capacity at zero discharge head.

▼ 24 12 Volt dc.

2. Rule 500The Rule 500 offers many design features whilekeeping size and cost to a minimum. Especiallypopular on smaller craft, Rule 500 pumps are unmatched in pumping power and longevity. 19mm (3/4") discharge outlet. 1925 lph (500 US gph) capacity at zero discharge head.

▼ 25D 12 Volt dc.

▼ 26D 24 Volt dc.

3. Rule 800Rule offers two 800 styles - square and roundversions. The square model (20F) offers 36mounting variations as well as a gas resistantstrainer base. 19mm (3/4") discharge outlet. 3100lph (800 US gph) capacity at zero discharge head.

▼ 20F Square 12 Volt dc.

▼ 20R Round 12 Volt dc.

4. Rule 1100The Rule 1100 offers impressive pumping power forits size and cost. Competitive models in thispumping range are much larger and far moreexpensive. 28mm (11/8") discharge outlet. 4250 lph(1100 US gph) capacity at zero discharge head.

▼ 27D 12 Volt dc.

▼ 28D 24 Volt dc.

5. Rule 1500High pumping capacity and reliability at a lowercost. The Rule 1500 offers more pumping capacityand more exclusive design features than any comparable competitive pump. 28mm (11/8")discharge outlet. 5800 lph (1500 US gph) capacityat zero discharge head.

▼ 02 12 Volt dc.

▼ 02-6 With 1.8m (6') wire leads, 12 Volt dc.

▼ 03 24 Volt dc.

6. Rule 2000Engineered to commercial standards. The Rule 2000is the best selling high capacity submersible bilgepump in the world. 28.6mm (11/8") discharge outlet.7750 lph (2000 US gph) capacity at zero dischargehead.

▼ 10 12 Volt dc.

▼ 10-6UL UL listed with 1.8m (6') wire leads. 12 Volt dc.

▼ 12 24 Volt dc.

7. Rule 3700Heavy duty construction for both commercial andpleasure boat use; known for trouble free operationand reliability. 38mm (11/2") discharge outlet. 14350lph (3700 US gph) capacity at zero discharge head.

▼ 14A 12 Volt dc.

▼ 16A 24 Volt dc.

8. Rule 4000Designed for the toughest applications, the 4000pump optimises Rule’s exclusive design features toproduce the highest capacity available for a pumpits size. 50mm (2") discharge outlet. 15500 lph(4000 US gph) capacity at zero discharge head.

▼ 56D 12 Volt dc.

▼ 56D-24 24 Volt dc.

Non-Automatic Gold Series Bilge PumpsRule’s Gold Series Bilge Pumps are supportedwith an exclusive 5 year warranty. The pumpsfeature a Rule manufactured double insulatedlong stack motor for superior quality andperformance.

9. Rule Gold Series Pumps1500, 2000 and 3700 Models available withexclusive Rule moisture tight seals and silent,vibration-less operation. Complete with anti-airlockprotection and easy clean snap lock strainers.

▼ 04 12 Volt dc, Gold Series 5800 lph (1500 US gph).

▼ 13A 12 Volt dc, Gold Series 14350 lph (3700 US gph).

Non-Automatic Cartridge Bilge PumpsRule’s Cartridge Series Bilge Pumps have theadded feature of replacement motors. This allows you to carry a spare motor,providing an extra level of security andprotection. Maintenance is also made simpleby quick and easy access to the impeller ifblockages occur. Replacement motors are sold separately.

10. Rule Cartridge PumpsAvailable in 3 model variants, the Cartridge SeriesPumps offers a simple maintenance andreplacement option for bilge pumping.

▼ 25DC 12 Volt dc, Cartridge Pump 1925 lph (500 US gph).

▼ 20RC 12 Volt dc, Cartridge Pump 2650 lph (700 US gph).

11. Replacement MotorCartridgesReplacement motor cartridges for Rule cartridgebilge pump and Livewell / Aerator pumps.

▼ 25DR 12 Volt dc, Motor Cartridge 1925 lph (500 US gph).

▼ 20RR 12 Volt dc, Motor Cartridge 2650 lph (700 US gph).

Non-AutomaticBilge Pumps

Rule Automatic Bilge PumpsFloat switches are not required for these fullyautomatic pumps. Controlled by computerisedoperation, the pump will turn on every 2.5minutes for about 1 second to sense forwater. If water is present, the pump willsense resistance and continue to run until allwater is removed. Power use in the checkingmode is minimal for the peace of mind thatthis range of pumps offer.

6. Rule Automatic 500Compact, efficient and offers 1925 lph (500 US gph) capacity at zero discharge head.19mm (3/4") discharge outlet.

▼ 25S 12 Volt dc.

▼ 25S-24 24 Volt dc.

7. Rule Automatic 800Expanding on Rule's computerised pumptechnology, Rule introduces the 3100 lph (800 USgph) fully automatic bilge pump. The 800 seriesoffers increased capacity over our 500 Series whilemaintaining the 19mm (3/4") discharge.

▼ 20RS 12 Volt dc.

8. Rule Automatic 1100Impressive pumping power for its size and cost,offering up to 4250 lph (1100 US gph) capacity atzero discharge head. 29mm (11/8") discharge outlet.

▼ 27S 12 Volt dc.

9. Rule Automatic 1500Reliable, efficient and offers 5800 lph (1500 US gph) capacity at zero discharge head.29mm (11/8") discharge outlet.

▼ 51S 12 Volt dc.

10. Rule Automatic 2000Very popular mid range submersible pump offering7750 lph (2000 US gph) capacity at zero dischargehead. 29mm (11/8") discharge outlet

▼ 53S 12 Volt dc.

11. Rule Automatic 3700Heavy duty construction for both commercial andpleasure boat use offering 14350 lph (3700 US gph) capacity at zero discharge head.38mm (11/2") discharge outlet.

▼ 55S 12 Volt dc.

12. Rule Automatic 4000Highest capacity available for a pump of its size,offering an astounding 15500 lph (4000 US gph)capacity at zero discharge head. 38mm (11/2")discharge outlet.

▼ 56S 12 Volt dc.

Rule-Mate®

Automated Bilge PumpsThe Rule-Mate® series of automated bilgepumps feature a pump and a non-mercuryfloat switch in a single, compact housing.When the float rises, the pump turns on.There is no on/off cycling and no power useuntil the pump comes on. The pump remainson until it senses no load against the impeller.Thoughtfully designed, Rule-Mate® pumps canbe used in practically all bilge pumpingapplications.

1. Rule-Mate® 500The smallest of the family offering 1925 lph (500 US gph) capacity at zero discharge head. The compact size makes Rule-Mate® easy to fit -even in the smallest of bilge compartments. 19mm(3/4") discharge outlet.

▼ RM500 12 Volt dc.

▼ RM500-24 24 Volt dc.

2. Rule-Mate® 750Ideal for small cruisers, Rule-Mate® 750 offers animpressive 2900 lph (750 US gph) capacity at zerodischarge head with 19mm (3/4") discharge outlet.

▼ RM750-24 24 Volt dc.

3. Rule-Mate® 1100This mid-size model of Rule-Mate® offers anamazing 4250 lph (1100 US gph) capacity at zerodischarge head yet impressively keeps the samecompact size and footprint of the smaller models!29mm (11/8") discharge outlet.

▼ RM1100-24 24 Volt dc.

4. Rule-Mate® 1500New high output model to the family offering aremarkable 5800 lph (1500 US gph) capacity atzero discharge head. 29mm (11/8") discharge outlet.

5. Rule-Mate® 2000New high capacity model complete with all thebenefits of Rule pumping technology. Offers anastounding 7750 lph (2000 US gph) capacity at zerodischarge head. 29mm (11/8") discharge outlet.

▼ RM2000-24 24 Volt dc. W A R N I N GDO NOT use any Jabsco or Rule pump forpetrol, petroleum products or any productswith a flash point below 37°C (98°F).

Photo: Fairline Boats plc

1. Rule 360

2. Rule 500

3. Rule 800

5. Rule 1500

4. Rule 1100

6. Rule 2000

2. Rule-Mate® 750

4. Rule-Mate® 1500

5. Rule-Mate® 2000

3. Rule-Mate® 1100

7. Rule 3700

11. ReplacementMotor Cartridge

9. Rule Gold Series

8. Rule 4000

10. Rule Cartridge Pumps

1. Rule-Mate® 500Bilge Pumping SystemsDoesn't your boat deserve proper protection?

Traditional non-automatic bilge pumps areoperated by the use of a control switch tosense water and activate the pump.A selection of control and panel switchesavailable can be found on the Bilge Switchesand Controls page.

1. Rule 360The Rule 360 provides outstanding quality andvalue. It is economically priced and designed forsmall boats. 19mm (3/4") discharge outlet. 1400 lph(360 US gph) capacity at zero discharge head.

▼ 24 12 Volt dc.

2. Rule 500The Rule 500 offers many design features whilekeeping size and cost to a minimum. Especiallypopular on smaller craft, Rule 500 pumps are unmatched in pumping power and longevity. 19mm (3/4") discharge outlet. 1925 lph (500 US gph) capacity at zero discharge head.

▼ 25D 12 Volt dc.

▼ 26D 24 Volt dc.

3. Rule 800Rule offers two 800 styles - square and roundversions. The square model (20F) offers 36mounting variations as well as a gas resistantstrainer base. 19mm (3/4") discharge outlet. 3100lph (800 US gph) capacity at zero discharge head.

▼ 20F Square 12 Volt dc.

4. Rule 1100The Rule 1100 offers impressive pumping power forits size and cost. Competitive models in thispumping range are much larger and far moreexpensive. 28mm (11/8") discharge outlet. 4250 lph(1100 US gph) capacity at zero discharge head.

▼ 27D 12 Volt dc.

▼ 28D 24 Volt dc.

5. Rule 1500High pumping capacity and reliability at a lowercost. The Rule 1500 offers more pumping capacityand more exclusive design features than any comparable competitive pump. 28mm (11/8")discharge outlet. 5800 lph (1500 US gph) capacityat zero discharge head.

▼ 02 12 Volt dc.

▼ 02-6 With 1.8m (6') wire leads, 12 Volt dc.

▼ 03 24 Volt dc.

6. Rule 2000Engineered to commercial standards. The Rule 2000is the best selling high capacity submersible bilgepump in the world. 28.6mm (11/8") discharge outlet.7750 lph (2000 US gph) capacity at zero dischargehead.

▼ 10 12 Volt dc.

▼ 10-6UL UL listed with 1.8m (6') wire leads. 12 Volt dc.

▼ 12 24 Volt dc.

7. Rule 3700Heavy duty construction for both commercial andpleasure boat use; known for trouble free operationand reliability. 38mm (11/2") discharge outlet. 14350lph (3700 US gph) capacity at zero discharge head.

▼ 14A 12 Volt dc.

▼ 16A 24 Volt dc.

8. Rule 4000Designed for the toughest applications, the 4000pump optimises Rule’s exclusive design features toproduce the highest capacity available for a pumpits size. 50mm (2") discharge outlet. 15500 lph(4000 US gph) capacity at zero discharge head.

▼ 56D 12 Volt dc.

▼ 56D-24 24 Volt dc.

Non-Automatic Gold Series Bilge PumpsRule’s Gold Series Bilge Pumps are supportedwith an exclusive 5 year warranty. The pumpsfeature a Rule manufactured double insulatedlong stack motor for superior quality andperformance.

9. Rule Gold Series Pumps1500, 2000 and 3700 Models available withexclusive Rule moisture tight seals and silent,vibration-less operation. Complete with anti-airlockprotection and easy clean snap lock strainers.

▼ 13A 12 Volt dc, Gold Series 14350 lph (3700 US gph).

Non-Automatic Cartridge Bilge PumpsRule’s Cartridge Series Bilge Pumps have theadded feature of replacement motors. This allows you to carry a spare motor,providing an extra level of security andprotection. Maintenance is also made simpleby quick and easy access to the impeller ifblockages occur. Replacement motors are sold separately.

10. Rule Cartridge PumpsAvailable in 3 model variants, the Cartridge SeriesPumps offers a simple maintenance andreplacement option for bilge pumping.

▼ 20RC 12 Volt dc, Cartridge Pump 2650 lph (700 US gph).

11. Replacement MotorCartridgesReplacement motor cartridges for Rule cartridgebilge pump and Livewell / Aerator pumps.

▼ 20RR 12 Volt dc, Motor Cartridge 2650 lph (700 US gph).

Non-AutomaticBilge Pumps

Rule Automatic Bilge PumpsFloat switches are not required for these fullyautomatic pumps. Controlled by computerisedoperation, the pump will turn on every 2.5minutes for about 1 second to sense forwater. If water is present, the pump willsense resistance and continue to run until allwater is removed. Power use in the checkingmode is minimal for the peace of mind thatthis range of pumps offer.

6. Rule Automatic 500Compact, efficient and offers 1925 lph (500 US gph) capacity at zero discharge head.19mm (3/4") discharge outlet.

▼ 25S 12 Volt dc.

▼ 25S-24 24 Volt dc.

7. Rule Automatic 800Expanding on Rule's computerised pumptechnology, Rule introduces the 3100 lph (800 USgph) fully automatic bilge pump. The 800 seriesoffers increased capacity over our 500 Series whilemaintaining the 19mm (3/4") discharge.

▼ 20RS 12 Volt dc.

8. Rule Automatic 1100Impressive pumping power for its size and cost,offering up to 4250 lph (1100 US gph) capacity atzero discharge head. 29mm (11/8") discharge outlet.

▼ 27S 12 Volt dc.

9. Rule Automatic 1500Reliable, efficient and offers 5800 lph (1500 US gph) capacity at zero discharge head.29mm (11/8") discharge outlet.

▼ 51S 12 Volt dc.

10. Rule Automatic 2000Very popular mid range submersible pump offering7750 lph (2000 US gph) capacity at zero dischargehead. 29mm (11/8") discharge outlet

▼ 53S 12 Volt dc.

11. Rule Automatic 3700Heavy duty construction for both commercial andpleasure boat use offering 14350 lph (3700 US gph) capacity at zero discharge head.38mm (11/2") discharge outlet.

▼ 55S 12 Volt dc.

12. Rule Automatic 4000Highest capacity available for a pump of its size,offering an astounding 15500 lph (4000 US gph)capacity at zero discharge head. 38mm (11/2")discharge outlet.

▼ 56S 12 Volt dc.

Rule-Mate®

Automated Bilge PumpsThe Rule-Mate® series of automated bilgepumps feature a pump and a non-mercuryfloat switch in a single, compact housing.When the float rises, the pump turns on.There is no on/off cycling and no power useuntil the pump comes on. The pump remainson until it senses no load against the impeller.Thoughtfully designed, Rule-Mate® pumps canbe used in practically all bilge pumpingapplications.

1. Rule-Mate® 500The smallest of the family offering 1925 lph (500 US gph) capacity at zero discharge head. The compact size makes Rule-Mate® easy to fit -even in the smallest of bilge compartments. 19mm(3/4") discharge outlet.

▼ RM500-24 24 Volt dc.

2. Rule-Mate® 750Ideal for small cruisers, Rule-Mate® 750 offers animpressive 2900 lph (750 US gph) capacity at zerodischarge head with 19mm (3/4") discharge outlet.

▼ RM750-24 24 Volt dc.

3. Rule-Mate® 1100This mid-size model of Rule-Mate® offers anamazing 4250 lph (1100 US gph) capacity at zerodischarge head yet impressively keeps the samecompact size and footprint of the smaller models!29mm (11/8") discharge outlet.

▼ RM1100-24 24 Volt dc.

4. Rule-Mate® 1500New high output model to the family offering aremarkable 5800 lph (1500 US gph) capacity atzero discharge head. 29mm (11/8") discharge outlet.

5. Rule-Mate® 2000New high capacity model complete with all thebenefits of Rule pumping technology. Offers anastounding 7750 lph (2000 US gph) capacity at zerodischarge head. 29mm (11/8") discharge outlet.

▼ RM2000-24 24 Volt dc. W A R N I N GDO NOT use any Jabsco or Rule pump forpetrol, petroleum products or any productswith a flash point below 37°C (98°F).

11. Amazon WarriorIf you have a larger yacht or commercial craft thenthe Warrior is for you. Made from robust alloy withtwin diaphragms for added safety, the Warrior iscapable of an amazing 135 lpm (35 US gpm) andhas a big 45cm (18") handle for easy pumpingwhether mounted on or through deck.

▼ 29280-0000 Warrior 38mm (11/2") hose.

▼ 29279-0000 Optional Through Deck Kit.

▼ 29289-0000 Under deck bracket (required forinstallation with 29279-0000).

12. Amazon UniversalOur most versatile manual bilge pump which can bemounted on or through the bulkhead or deck.Designed for larger and medium sized boats with aflow rate of up to 100 lpm (25 US gpm) theUniversal is equally good at emptying holding tanksand has excellent solids handling ability.

▼ 29270-0000 Universal 38mm (11/2") hose.

▼ 29279-0000 Optional through deck kit.

13. Amazon ThrudeckThe Thrudeck is available with 25mm (1") or 38mm(11/2") ports giving 50 lpm (13 US gpm) or 75 lpm (20 US gpm) output. The design allows unlimitedvariation of port direction and easy access to thewhole pump chamber and valves.

▼ 29250-0000 25mm (1") hose.

▼ 29250-0010 38mm (11/2") hose.

14. Amazon BulkheadThe smallest pump in our range designed specificallyfor smaller boats but still giving a powerful outputof 45 lpm (12 US gpm). Suitable for mounting onbulkhead or deck it has multi-positioned ports andbody which give an amazing 96 assembly variations.

▼ 29240-0000 25mm (1") hose.

15. Bilge StrainersStrainers prevent bilge debris from blocking pumpinlet hose and are fitted with a non-return valve tostop backflow of water into the bilge. Available forboth 19mm, 25mm and 38mm (3/4", 1" and 11/2")hose. Outlet ports can be positioned fromhorizontal to vertical.

▼ 29290-1020 19mm (3/4") hose.

▼ 29290-1000 25mm (1") hose.

▼ 29290-1010 38mm (11/2") hose.

16. Non-return ValvesNon-return valves help priming and preventbackflow of water into the bilge. There are threesizes for 19mm, 25mm and 38mm (3/4", 1" and 11/2")hose.

▼ 29295-1011 19mm (3/4") hose.

▼ 29295-1000 25mm (1") hose.

▼ 29295-1010 38mm (11/2") hose.

1. 50880 Bilge PumpIntroducing our NEW generation single diaphragmpump, ideal for use in emptying the shallowest ofbilges. The filter-less design makes maintenanceeasy and is virtually unblockable! The pump has acompact design with multi positionable ports, whichmakes installation simple. 960 lph (254 US gph)output, self priming to 3m (10ft) and capable ofextensive dry running, offering an inexpensive,reliable solution for bilge pumping.

▼ 50880-1000 12 Volt dc.

▼ 50880-1100 24 Volt dc.

2. Jabsco 4Continuous rated bilge pump with waterproofcoating for harsh environments. 978 lph (258 US gph) open flow output. Diaphragm designallows extended dry running. Build-in thermaloverload protection. Complete with Pumpgard™strainer.

▼ 31705-0092 12 Volt dc.

▼ 31705-0094 24 Volt dc.

3. Shower Drain/Bilge PumpOne of the best selling small bilge and shower sumppumps in the world. Fully corrosion resistant andquiet running. 780 lph (200 US gph) output andself priming to 2m (6ft). Supplied with Pumpgard™strainer.

▼ 37202-2012 12 Volt dc.

▼ 37202-2024 24 Volt dc.

4-6.PAR Diaphragm Bilge PumpsThe original belt driven diaphragm pumps, Selfpriming and dry running. Belt drives, rubbermounting and internal pulsation dampeners reducenoise and vibration. The 34600 gives 2450 lph (645 US gph), the 36600 1800 lph (475 US gph)and the 36680 1250 lph (330 US gph). All complete with Pumpgard™ strainer

▼ 34600-0000 12 Volt dc.

▼ 34600-0010 24 Volt dc.

▼ 36600-0000 12 Volt dc.

▼ 36600-0010 24 Volt dc.

▼ 36680-2000 12 Volt dc.

▼ 36680-2010 24 Volt dc.

7. Water PuppyThe workhorse of our range! Designed for bilgepumping, or general transfer duty. Self priming upto 1.2m (4ft), with an output of 1920 lph (500 US gph).

▼ 23680-4003 12 Volt dc.

▼ 23680-4103 24 Volt dc.

8. Maxi Puppy 3000A high pressure and flow pump for bilge pumpingand deckwash. Self priming up to 2.4m (8ft) withan output of 2640 lph (660 US gph). It’s built tolast with a bronze pump head and oil resistantnitrile impeller.

▼ 23610-3003 12 Volt dc.

▼ 23610-3103 24 Volt dc.

9. Utility Puppy 2000This pump gives the same performance in allaspects as the Water Puppy but its clever pumpdesign means it will run dry for up to 20 minuteswithout damage.

▼ 23920-2403 12 Volt dc, BSP.

▼ 23920-2503 24 Volt dc, BSP.

10. Utility Puppy 3000The heavy duty Puppy pump. Suitable forcommercial applications or prolonged hard use.Flow and performance are as per the Maxi Puppy,but the Utility Puppy 3000 boasts ten minutes dryrunning and an indestructible mechanical seal forlong life.

▼ 23920-2313 12 Volt dc.

▼ 23920-2312 24 Volt dc.

11. Clutch PumpsJabsco clutch pumps are used world-wide forfirefighting, bilge pumping, ballast transfer,emergency pumping and high capacity deckwash,so, if you’re travelling offshore, workingprofessionally or simply want the most enduringhigh output pump available read on!

Engine driven; these pumps give flow rates of up to22,000 lph (5125 US gph) at 2000 rpm. Easy toservice and maintain, bilge debris and oil presentno problems to these robust bronze bodied flexibleimpeller pumps. We manufacture clutch pumpswith 1", 11/2" and 2" ports with manual or electro-magnetic clutches.

Proven time and again from Volvo and BOC Roundthe World Race Boats to deep sea trawlers. Pleaseconsult your Jabsco dealer to select the model mostsuited to your needs and engine installation.

2. Jabsco 4

4-6. PAR DiaphragmBilge Pumps

1. 50880 Bilge Pump

8. Maxi Puppy 3000

11. Clutch Pumps

7. Water Puppy

Self Priming Bilge Pumps Manual Bilge Pumps

11. Amazon Warrior

12. Amazon Universal

13. Amazon Thrudeck

14. Amazon Bulkhead

16. Non-return Valves

15. Bilge Strainers

10. Utility Puppy 3000

3. Shower Drain/Bilge Pump

Self Priming means a pump can drawfluid up to itself. Where we quote selfpriming distances, they are themaximum vertical distance a pump canself prime.

One essential component for any boat is aManual Bilge Pump mounted in a positionwhere it can be worked comfortably for longperiods of time. Yacht racing rules state that atleast one pump must be capable of beingpumped from the cockpit with all hatchesshut, and the best way to accomplish this iswith a through deck kit which allows the pumpto be installed safely below decks whilst theoperator pumps from above. A well designedmanual pump is very hard to block due to itslarge bore hose and valves and one piecediaphragm.

There are a variety of electric powered pumpsavailable, each type has its own advantagesand it’s wise to know what a pump can andcan’t do to simplify selection of the correctmodel and size for your boat. Remember,electric pumps can be installed with an automatic bilge switch for unattendedoperation.

Submersible Pumps are specifically designedto be fitted in the lowest part of the bilge.These electric Centrifugal Pumps are extremelyeconomical to buy and have huge flow rates.However, flow rates decrease more rapidlythan other pump types as the discharge headincreases, so do check our recommendedmaximum discharge heads and if in doubtalways go up a size.

There are 2 types of self priming electricalpumps available - Diaphragm and FlexibleImpeller. All self priming pumps can be mounted well away from damp or wetareas where they can be kept dry and easily maintained.

Diaphragm Pumps can be run dry forextended periods and so be used to hoover upthe last drops of water - especially useful onmore modern hull types with shallower bilges.

The rugged simplicity of Flexible ImpellerPumps means they can handle bilge debrisand are very easy to service, many yachtsmenare still using twenty five year old WaterPuppies! But remember Flexible Impellerpumps cannot be run dry or you will damagethe Impeller.

Chosen by professional mariners the worldover Jabsco Clutch Pumps will last you alifetime. They’re not the cheapest to buy orinstall but they pump huge volumes, pass bilgedebris and double as firefighting or deckwashpumps. As with all Flexible Impeller pumpsthey’re easy to service but must not be run dry.Belt driven from your engine they are availablewith either manual or electromagnetic clutchfor remote control.

Photo: Elan Marine

W A R N I N GDO NOT use any Jabsco pump for petrol,petroleum products or any products witha flash point below 37°C (98°F).