J cat en · 6-3 Floating Joint Series JA/JAH/JB The floating joint can absorb any...
Transcript of J cat en · 6-3 Floating Joint Series JA/JAH/JB The floating joint can absorb any...
6-3
Floating Joint
Series JA/JAH/JBThe floating joint can absorb any “off-centring” or “loss of parallel accuracy” between the cylin-der and the driven body.
Centring is unnecessary.
A high level of machining accuracy is unnecessary.
The installation time is dramatically reduced.
It is compact and is suitable for high tensile stresses.
Long life (with dustproof cover)
Rotation angle: ±5˚
Series Operating pressure
Air cylinder Hydraulic cylinder
Cylinder bore size(mm) Mounting Page
Series JA
Variations
1MPaor less
3.5MPaor less
6, 10, 15, 2025, 32, 40, 50
63, 80, 100, 125140, 160
Basic
Flange
Foot
Series JAH (Heavy load)
7MPaor less
40, 50, 6380, 100
Series JB (For compact cylinder)
1MPaor less
12, 16, 20, 2532, 40, 50, 63
80, 100
Basic(Female thread)
Basic
Flange
Foot
6-4
6-9
6-12
Radial deflection
Eccentric slide
Operating range
Radial deflection
Eccentric slide
Radial deflection
Eccentric slide
6-4
Specifications Model/Specifications
Operating
pressure
Air cylinder: ≤1MPa
Hydraulic cylinder: ≤3.5MPa
Basic, Flange, FootMounting
Operating range
ModelCylinderbore size
(mm)
Threadnominal size
Rot.angle
AllowableeccentricityU (mm)
Max. operating force(tension/compression) (N)
Basic Flange Foot
Standards/Thread nominal size
Options/Thread nominal size
JA6-3-050
JA10-4-070
JA15-5-080
JA15-6-100
JA�20-8-125
JA�30-10-125
JA�40-14-150
JA�63-18-150
JA�80-22-150
JA�100-26-150
JA�140-30-150
JA�160-36-150
6
10
10/15
15
20
25/30
40
50/63
80
100
125/140
160
M3
M4
M5
M6
M8
M10 X 1.25
M14 X 1.5
M18 X 1.5
M22 X 1.5
M26 X 1.5
M30 X 1.5
M36 X 1.5
19
54
123
123
1100
2500
6000
11000
18000
28000
54000
71000
1100
2500
4400
11000
18000
28000
36000∗
55000∗
1000∗
2000∗
4400
9000∗
14000∗
22000∗
36000∗
55000∗
0.5
0.5
0.5
0.5
0.5
0.5
0.75
1
1.25
2
2.5
3
JA�20-8-100
JA�25-10-150
JA�32-10-100
JA�40-12-125
JA�40-12-150
JA�40-12-175
JA�50-16-150
JA�63-16-200
JA�80-20-250
JA�100-24-300
JA�100-27-150
JA�125-27-200
JA�160-33-200
JA160-36-200
20
25
32
30/40
40
30/40
50
50/63
80
100
100
125
160
160
M8 X 1
M10 X 1.5
M10 X 1
M12 X 1.25
M12 X 1.5
M12 X 1.75
M16 X 1.5
M16 X 2
M20 X 2.5
M24 X 3
M27 X 1.5
M27 X 2
M33 X 2
M36 X 2
1100
2500
2500∗
4400
4400
4400
11000
11000
18000
28000
28000
28000∗
71000
71000
1100
2500
2500∗
4400
4400
4400
11000
11000
18000
28000
28000
28000∗
55000∗
—
1000∗
2000
2000∗
4400
4400
4400
9000
9000∗
14000∗
22000∗
22000∗
22000∗
55000∗
—
0.5
0.5
0.5
0.75
0.75
0.75
1
1
1.25
2
2
2
3
3
±5°
±5°
∗ In case of hydraulic cylinder 3.5MPa, use it within max. operating force.
Precautions
Mounting
Floating Joint/Standard
Series JA
Be sure to read before handling.Refer to p.0-39 to 0-46 for Safety Instructions and common precau-tions.
qTo screw the male threads of the rod into the female threads of the socket or the case, make sure that it does not bottom out.
If the floating joint is used with its rod bottom out, the stud will not be able to float, causing damage. Refer to the di men sions (P.5.2-4) for the screw-in depth of the female threads. As a rule, after the rod bottoms out, back off 1 to 2 turns.
wTo use a floating joint to connect the cylinder rod to a driven body, secure it in place by applying a torque that is appropriate for the thread size. Also, if there is a risk of loosening during operation, take mea sures to pre vent loosening, such as using a locking pin or thread adhesive. In the event that the con nect ed por tion becomes loose, the driven body might lose con trol or fall off, leading to equip ment damage or injury to personnel.
Warning
Series JA
Maintenance
qDo not reuse if disassembled. High strength adhesive is applied to the portion of
the connection that is threaded to prevent it from loos en ing, and it must not be dis as sem bled. If it is forcefully disassembled, it could lead to damage.
How to Order
JA Thread nominal size (Standard)
3-0504-0705-0806-1008-12510-12514-15018-15022-15026-15030-15036-150
Nominal size—FL
BasicFlangeFoot
Applicable cylinderthread nominal size
M3M4M5M6M8
M10 X 1.25M14 X 1.5M18 X 1.5M22 X 1.5M26 X 1.5M30 X 1.5M36 X 1.5
40F 14-150
Applicable cylinder bore size (mm)Mounting
610152030406380100140160
Model Symbol Applicable cylinderbore size (mm)
610
10/1520
25/3040
50/6380100
125/140160
Sta
ndar
d Warning
6-5
Floating Joint/Standard Series JA
Construction
ø6 to ø15
Rod end nut
ø20 to ø160
Component PartsNo.q
w
e
r
t
y
Description MaterialShaving steel
BrassCarbon steel
BrassSynthetic rubber
Low carbon steel wire rods
Stud CaseRingSocketDust coverRod end nut
No.q
w
e
r
t
y
u
i
o
Description MaterialChrome-molybdenum steel
Carbon steelChrome-molybdenum steel
Carbon steelSynthetic rubber
Carbon steelCarbon steel
Rolled steel plateRolled steel plate
Stud CaseRingCapDust coverSet screwRod end nutFlangeFoot
Accessories Dimensions
d: Thread nominal size
M3M4M5M6M8 X 1M8M10 X 1M10 X 1.25M10M12 X 1.25M12 X 1.5M12M14 X 1.5M16 X 1.5M16M18 X 1.5
H
2.43.245556667778101011
B
5.57810131317171719191922242427
D
5.36.87.89.812.512.516.516.516.518181821232326
C
6.48.19.211.51515
19.619.619.621.921.921.925.427.727.731.2
d: Thread nominal size
M20 X 1.5M20M22 X 1.5M24 X 1.5M24 X 2M24M26 X 1.5M27 X 1.5M27 X 2M30 X 1.5M30 X 2M33 X 2M36 X 1.5M39 X 1.5M42 X 3M48 X 1.5
H
12121314141416161618182021232529
B
30303236363641414146465055606575
C
34.634.637
41.641.641.647.347.347.353.153.157.763.569.375
86.5
D
29293134343439393944444853576272
(mm)
Part No. of dust cover
P2152051P2152052P215215P215225P215235P215245
Applicable model
JA6, JA10JA15, JB12, JB16JA20, JB20JA30, JB30JA40, JB40JA63, JA50, JB63
Part No. of dust cover
P215255P215265P215275P215285P215295
Applicable model
JA80, JAH40, JB80JA100, JAH50, JB100JA125, JAH63JA140, JAH80, JB140JA160, JAH100, JB160
Floating joint replacement parts∑Dust coverOrder with the following part no. if dust cover is damaged.Replaceable dust cover is only for the basic style. Flange styles and foot styles cannot be replaced.
∑Rod end nutIf rod end nut for the basic style of JA and JAH is needed, order it as follows:Example) JA40-14-150 NUT
6-6
Cylinderbore size
Weight(kg)
Max. operating force(tension/compression)
(N)
Allowableeccentricity
U
Max. threaddepth
PModel
610 (CJ1)10 (CZ1)/15 (CJ1)15 (CZ1)2025/304050/6380100125/140160
JA6-3-050JA10-4-070JA15-5-080JA15-6-100JA20-8-125JA30-10-125JA40-14-150JA63-18-150JA80-22-150JA100-26-150JA140-30-150JA160-36-150
34568
10141822263036
0.50.70.81
1.251.251.51.51.51.51.51.5
23.226
34.534.544
49.560
74.589.5110152178
79
12.512.517.519.5202529354252
8101414——————4555
121216162124314150
59.57996
1.51.522
4.556
7.59.511.51416
446678111419243036
3.24557811
13.516202224
5.5710101317222732414655
55.57789131518243842
0.50.50.50.50.50.50.75
11.25
22.53
1954
123123
110025006000
1100018000280005400071000
0.010.010.020.020.050.070.160.310.581.082.74.7
Nominalsize Pitch
MA B C D E F G H
Standards Air cylinder: Max. 1MPa Hydraulic cylinder: Max. 3.5MPa
20253230/404030/405050/6380100100125160160
JA20-8-100JA25-10-150JA32-10-100JA40-12-125JA40-12-150JA40-12-175JA50-16-150JA63-16-200JA80-20-250JA100-24-300JA100-27-150JA125-27-200JA160-33-200JA160-36-200
810101212121616202427273336
11.51
1.251.5
1.751.52
2.53
1.5222
4449.549.5606060
71.571.590.5110110123165178
17.519.519.52020202222273235343851
————————3035—384255
212424313131414150
59.559.5669696
4.555666
7.57.59.511.511.5131616
7881111111414192424273655
788111111
13.513.5162020202424
1317172222222727324141415555
8991313131515182424244242
0.50.50.50.750.750.75
11
1.2522233
110025002500∗440044004400
110001100018000280002800028000∗7100071000
0.050.070.070.160.160.160.30.30.6
1.051.081.54.54.7
Options Air cylinder: Max. 1MPa Hydraulic cylinder: Max. 3.5MPa
(mm)
∗ In case a hydraulic cylinder 3.5MPa, use it within the above max. operating force.
Basic/JA6 to JA160
JA6 to 15
Without C-dimension
Series JA
JA20 to 160
Use the precision spanner for clock 4mm in case of mounting male thread of JA6 and JA10.
6-7
Series JAFloating Joint/Standard
JAF20 to 40
Flange/JAF20 to JAF160
JAF50 to 160
Cylinderbore size
Weight(kg)
Allowableeccentricity
U
Max. threaddepth
PModel
2025/304050/6380100125/140160
JAF20-8-125JAF30-10-125JAF40-14-150JAF63-18-150JAF80-22-150JAF100-26-150JAF140-30-150JAF160-36-150
810141822263036
1.251.251.51.51.51.51.51.5
32.53649
61.576.594
131152
89131518243842
0.50.50.75
11.25
22.53
110025004400
11000180002800036000∗55000∗
0.080.120.280.631.152.075.29
Nominal size Pitch
MA
192532657590
125150
B
485270
L
36405245556582
100
C
2124314150
59.57996
D
6691216192429
T
6.66.69911111822
J
7811
13.516202224
G
1317222732414655
20253230/404030/405050/6380100100125160
JAF20-8-100JAF25-10-150JAF32-10-100JAF40-12-125JAF40-12-150JAF40-12-175JAF50-16-150JAF63-16-200JAF80-20-250JAF100-24-300JAF100-27-150JAF125-27-200JAF160-33-200
8101012121216162024272733
11.51
1.251.5
1.751.52
2.53
1.522
32.53636494949
61.561.576.59494
106152
89913131315151824242442
0.50.50.50.750.750.75
11
1.252223
110025002500∗440044004400
110001100018000280002800028000∗55000∗
0.080.120.120.280.280.280.630.631.152.072.072.89
1925253232326565759090
100150
485252707070
364040525252454555656572
100
212424313131414150
59.559.56696
66699912121619192129
6.66.66.6999991111111822
788111111
13.513.51620202024
13171722222227273241414155
H
Standards Air cylinder: Max. 1Mpa Hydraulic cylinder: Max. 3.5MPa
Options Air cylinder: Max. 1MPa Hydraulic cylinder: Max. 3.5MPa
(mm)
∗ In case of a hydraulic cylinder 3.5MPa, use it within the above max. operating force.
Max. operating force(tension/compression)
(N)
6-8
Foot/JAL20 to JAF160
JAL20 to 100
Series JA
JAL125 to 160
Cylinderbore size
Weight(kg)
Max. threaddepthP
Model
2025/304050/6380100125/140160
JAL20-8-125JAL30-10-125JAL40-14-150JAL63-18-150JAL80-22-150JAL100-26-150JAL140-30-150JAL160-36-150
810141822263036
1.251.251.51.51.51.51.51.5
445267
82.598.5123187213
89131518243842
Allowableeccentricity
U
0.50.5
0.751
1.252
2.53
1000∗2000∗44009000∗
14000∗22000∗36000∗55000∗
0.090.180.360.611.092.036.410
Nominal size Pitch
MA
2124314150
59.57996
D
1824303442486074
E
4448
F
3844
57.571.586
107125144
K
6.69
111114161822
J
7811
13.516202224
G
1317222732414655
H
1216192225328090
L
1925303847587989
T
30425256708096
116
B
11.514
17.52328354555
C
Standards Air cylinder: Max. 1MPa Hydraulic cylinder: Max. 3.5MPa
20253230/404030/405050/6380100100125160
JAL20-8-100JAL25-10-150JAL32-10-100JAL40-12-125JAL40-12-150JAL40-12-175JAL50-16-150JAL63-16-200JAL80-20-250JAL100-24-300JAL100-27-150JAL125-27-200JAL160-33-200
8101012121216162024272733
11.51
1.251.51.751.52
2.53
1.522
445252676767
82.582.598.5123123155213
89913131315151824242442
0.50.50.50.750.750.75
11
1.252223
1000∗20002000∗44004400440090009000∗
14000∗22000∗22000∗22000∗55000∗
0.090.180.180.360.360.360.610.611.092.032.034.110
212424313131414150
59.559.56696
18242430303034344248485474
3648
384444
57.557.557.571.571.586
107107102144
6.699
11111111111416161422
788111111
13.513.51620202024
13171722222227273241414155
12161619191922222532327090
19252530303038384758586989
304242525252565670808088
116
11.51414
17.517.517.523232835353855
Options Air cylinder: Max. 1MPa Hydraulic cylinder: Max. 3.5MPa
(mm)
∗ In case of a hydraulic cylinder 3.5MPa, use it within the above max. operating force.
Max. operating force(tension/compression)
(N)
6-9
JA H
Thread nominal size (Standard)
16-15020-15024-15030-15039-15048-150
Nominal size
–FL
BasicFlangeFoot
Cylinder thread nominal sizeM16 X 1.5M20 X 1.5M24 X 1.5M30 X 1.5M39 X 1.5M48 X 1.5
40F 16-150
Mounting
Applicable cylinder bore size (mm)
Large load style
40506380100
Model Symbol Cylinderbore size (mm)
40506380
100Hea
vy lo
ad s
tyle
Maintenance
Mounting
Floating Joint/Heavy Load Style
Series JAH
Be sure to read before handling.Refer to p.0-39 to 0-46 for Safety Instructions and commonprecautions.
Precautions
Warning
qDo not reuse if disassembled. High strength adhesive is applied to the por-
tion of the connection that is threaded to prevent it from loosening, and it must not be disassem bled. If it is forcefully disassembled, it could lead to damage.
Warning
How to Order
qTo screw the male threads of the rod into the female threads of the socket or the case, make sure that it does not bottom out.
If the floating joint is used with its rod bottomed out, the stud will not be able to float, causing damage. Refer to the dimensions (p.5.2-8) for the screw-in depth of the female threads. As a rule, after the rod bottoms out, back off 1 to 2 turns.
Series JAH
Series JAHL(Foot style)
Series JAHF(Flange style)
wTo use a floating joint to connect the cylinder rod to a driven body, secure it in place by applying a torque that is appropriate for the thread size. Furthermore, if there is a risk of loosening during operation, take measures to prevent loosening, such as using a locking pin or thread adhesive. In the event that the connected portion becomes loose, the driven body might lose control or fall off, leading to equipment damage or injury to personnel.
Specifications Model/SpecificationsOperatingpressure Hydraulic cylinder: ≤7MPa
Basic, Flange, FootMounting
Operating range
ModelCylinder bore size
(mm)
Threadnominal size
Rotationangle
AllowableeccentricityU (mm)
Max. operating force(tension/compression) (N)
Basic Flange Foot
Standards/Thread nominal size
Options/Thread nominal size
JAH40-16-150
JAH50-20-150
JAH63-24-150
JAH80-30-150
JAH100-39-150
JAH100-48-150
40
50
63
80
100
100
JAH63-24-200
JAH80-30-200
JAH100-42-300
63
80
100
M24 X 2
M30 X 2
M42 X 3
2
2.5
3
28000
54000
71000
22000
36000
55000
22000
36000
55000
M16 X 1.5
M20 X 1.5
M24 X 1.5
M30 X 1.5
M39 X 1.5
M48 X 1.5
11000
18000
28000
54000
71000
71000
9000
14000
22000
36000
55000
55000
9000
14000
22000
36000
55000
55000
1.25
2
2
2.5
3
3
±5˚
±5˚
6-10
Construction
Without C-dimension
Series JAH
JAH40 to 100
Basic/JAH
Component PartsNo.q
w
e
r
t
y
u
i
o
MaterialChrome-molybdenum steel
Carbon steelChrome-molybdenum steel
Carbon steelSynthetic rubber
Carbon steelCarbon steel
Rolled steel plateRolled steel plate
StudCaseRingCapDust coverSet screwRod end nutFlangeFoot
Description
Cylinderbore size
Weight(kg)
Allowableeccentricity
U
Max. threaddepth
PModel
40506380100100
JAH40-16-150JAH50-20-150JAH63-24-150JAH80-30-150JAH100-39-150JAH100-48-150
162024303948
1.51.51.51.51.51.5
85.5101120152178191
181824384249
1.2522
2.533
110001800028000540007100071000
0.581.081.52.74.85.4
Nominal size Pitch
MA
222832425261
B
2531354555
C
5059.566799696
D
9.511.513141616
E
192427303636
F
161620222429
G
323241465570
H
Standards/Heavy load style Hydraulic cylinder: Max. 7MPa
6380100
JAH63-24-200JAH80-30-200JAH100-42-300
243042
223
120152178
243842
22.53
280005400071000
1.52.74.8
314155
3545
667996
131416
273036
202224
414655
Options/Heavy load style Hydraulic cylinder: Max. 7MPa
(mm)
Max. operating force(tension/compression)
(N)
6-11
Series JAH Floating Joint/Heavy Load Style
JAHF40 to 100
Flange/JAHF
JAHL63 to 100
JAHL40/50
Foot/JAHL
Cylinderbore size
Weight(kg)
Allowableeccentricity
U
Max. threaddepth
PModel
40506380100100
JAHF40-16-150JAHF50-20-150JAHF63-24-150JAHF80-30-150JAHF100-39-150JAHF100-48-150
162024303948
1.51.51.51.51.51.5
7689
106131152159
181824384249
1.2522
2.533
90001400022000360005500055000
1.252.52.85.29
9.3
Nominal size Pitch
MA
Standards/Heavy load style Hydraulic cylinder: Max. 7MPa
6380100
JAHF63-24-200JAHF80-30-200JAHF100-42-300
243042
223
106131152
75100100125150150
B
100125150
50627282100100
C
7282100
5059.566799696
D
667996
151821242929
T
212429
111418182222
J
181822
161620222428
G
202224
323241465570
H
414655
243842
22.53
220003600055000
2.85.29
Options/Heavy load style Hydraulic cylinder: Max. 7MPa
(mm)
Max. operating force(tension/compression)
(N)
40506380100100
JAHL40-16-150JAHL50-20-150JAHL63-24-150JAHL80-30-150JAHL100-39-150JAHL100-48-150
162024303948
1.51.51.51.51.51.5
98.5123155187213220
182424384249
1.2522
2.533
90001400022000360005500055000
1.092.034.16.410
10.5
70808896
116116
283538455555
5059.566799696
424854607474
36444848
86107102125144151
253270809090
475869798989
224444
141618182222
162020222428
324141465570
Standards/Large load style Hydraulic cylinder: Max. 7MPa
6380100
JAHL63-24-200JAHL80-30-200JAHL100-42-300
243042
223
155187213
8896
116
384555
667996
546074
364448
102125144
708090
697989
444
181822
202224
414655
243842
22.53
220003600055000
4.16.410
Options/Large load style Hydraulic cylinder: Max. 7MPa
Cylinderbore size
Weight(kg)
Allowableeccentricity
U
Max. threaddepthP
ModelNominal
size Pitch
MA B C D E F K L T N J G H
(mm)
Max. operating force(tension/compression)
(N)
6-12
Specifications Model/Specifications
Operatingpressure
Air pressure compact cylinder ≤1MPa
Operating range
ModelCylinderbore size
(mm)
Cylinder threadnominal size
Rotationangle
AllowableeccentricityU (mm)
Max. operating force(tension/compression) (N)
Compression side Tension side
JB12-3-050
JB16-4-070
JB20-5-080
JB25-6-100
JB40-8-125
JB63-10-150
JB80-16-200
JB100-20-250
JB140-22-250
JB160-24-300
12
16
20
25
32/40
50/63
80
100
125/140
160
M3
M4
M5
M6
M8
M10
M16
M20
M22
M24
112
200
1100
2500
6000
11000
18000
28000
54000
71000
112
200
300
500
1300
3100
5000
7900
15300
20000
0.5
0.5
0.5
0.5
0.75
1
1.25
2
2.5
3
±5°
Maintenance
Mounting
Floating Joint/For Compact Cylinder
Series JB
Be sure to read before handling.Refer to p.0-39 to 0-46 for SafetyInstructions and common precautions.
Precautions
Warning
qDo not reuse if disassembled. High strength adhesive is applied to the por-
tion of the connection that is threaded to prevent it from loosening, and it must not be disassembled. If it is forcefully disassembled, it could lead to damage.
Warning
How to Order
qTo screw the male threads of the rod into the female threads of the socket or the case, make sure that it does not bottom out.
If the floating joint is used with its rod bottomed out, the stud will not be able to float, causing damage. Refer to the dimensions (p.5.2-11) for the screw-in depth of the female threads. As a rule, after the rod bottoms out, back off 1 to 2 turns.
wTo use a floating joint to connect the cylinder
J B
Thread nominal size
13-05014-07015-08016-10018-12510-15016-20020-25022-25024-300
Threadnominal size
Cylinder threadnominal size
M3M4M5M6M8
M10M16M20M22M24
40 8-125
Applicable cylinderbore size (mm)
Compact cylinder/Female thread
12162025406380100140160
Symbol Cylinderbore size (mm)
12162025
32/4050/63
80100
125/140160
rod to a driven body, secure it in place by apply-ing a torque that is appropriate for the thread size. Also, if there is a risk of loosening during operation, take measures to prevent loosen-ing, such as using a locking pin or thread adhesive. In the event that the connected portion becomes loose, the driven body might lose control or fall off, leading to equipment damage or injury to personnel.
6-13
Cylinder bore size
Weight(kg)
Compression side Tension side
Allowableeccentricity
U
Max. thread depth
PModel
1216202532/4050/6380100125/140160
JB12-3-050JB16-4-070JB20-5-080JB25-6-100JB40-8-125JB63-10-150JB80-16-200JB100-20-250JB140-22-250JB160-24-300
345681016202224
0.50.70.81
1.251.52
2.52.53
24.526.5333851
62.580.5101129149
7789131518243842
0.50.50.50.50.75
11.25
22.53
112200300500
1300310050007900
1530020000
112200
110025006000
1100018000280005400071000
0.020.020.040.070.150.290.561.042.64.5
Nominalsize Pitch
MA
34.556
8.51016211820
B
46
6.58111320262226
C
16162124314150
59.57996
D
22
4.556
7.59.511.51416
E
6678111419243036
F
557811
13.516202224
G
10101317222732414655
H
(mm)Max. operating force
(tension/compression) (N)
Series JBFloating Joint/For Compact Cylinder
Construction
JB20 to 160
JB16/20
Basic/JB
ø12/ø16 ø20 to ø160
Component PartsNo.q
w
e
r
t
Description MaterialShaving steel
BrassCarbon steel
BrassSynthetic rubber
StudCaseRingSocketDust cover
No.q
w
e
r
t
y
Description MaterialChrome-molybdenum steel
Carbon steelChrome-molybdenum steel
Carbon steelSynthetic rubber
Carbon steel
StudCaseRingCapDust coverSet screw
6-14