IU06 IU10 IU16 UNDERSCORE InOut - cdn1.iguzzini.com · LP - Anodized Aluminum profile AH-Anodized...
Transcript of IU06 IU10 IU16 UNDERSCORE InOut - cdn1.iguzzini.com · LP - Anodized Aluminum profile AH-Anodized...
Luminaire characteristics: Power input: 2.6 or 3.5W/ft (Remote fixture only) Lumens: 90 or 190lm/ft (for 2900K, 80CRI) Luminaire efficacy: 30 to 55lm/W
Source: White LED (LM-80 tested) 2500K / 2600K : 80CRI 2800K / 2900K : 80CRI 3600K / 3800K : 80CRI 4400K / 4500K / 4600K : 80CRILumen maintenance: See page 4 for details.
Optics: Underscore InOut can be used to create straight or curved lines on flat surfaces. Darkspot free lighting is guaranteed along the entire strip profile up to the end parts.
Material: Coextruded high performance polymer extrusion IP68 factory sealed assembly. Designed for extreme temperatures: -22°F to +113°F (-30°C to +45°C). The high performance polymer has been tested at 1760°F (960°C) with Glow wire without igniting of smoke. Integral stainless steel splint system reducing mechanical stress and increase reliability.
Mounting: Universal surface mounted, using mounting accessories (included). Supplied with 3" (80mm) long cable with patented IP68 connection system. See mounting options on page 2 - 3.
Electrical: 24V remote electronic driver to be ordered separately (see options on page 7)
Dimming: See dimming options on page 7.
Finish: White polymer extrusion with milky finish. Extruded anodized aluminum or stainless steel mounting clips.
Weight: 0.2lb/ft (0.1kg/ft)
Warranty: 5 year limited warranty.
Ratings: IP68, IK10
Certification: Wet location
Underscore InOut is a flexible continuous linear system for exterior applications, engineered for extreme conditions. This flexible system allows freedom of design on surface of any shape and size. Underscore InOut is the right solution where direct diffuse distribution is desired.
Project : Type: SPECIFICATION SHEET
Page: 1 of 7
Due to continuous improvements, the information herein may be changed without notice9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7, P.: 514.523.1339 F.: 514.525.6107 www.iguzzini.com/us
UNDERSCOREIN/OUT
JP - R22 Last update: March 05, 2019
LOW CLEARANCE MOUNTING - 1" HEIGHTWITH EXPOSED CONNECTORS
HIGH PROFILE MOUNTING - 1¼" HEIGHTWITH HIDDEN CONNECTORS
MODELS AND MOUNTING
Project : Type: SPECIFICATION SHEET
Page: 2 of 7
Due to continuous improvements, the information herein may be changed without notice9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7, P.: 514.523.1339 F.: 514.525.6107 www.iguzzini.com/us
UNDERSCOREIN/OUT
JP - R22 Last update: March 05, 2019
3/4"(19mm)
1¼"(32mm)
Minimum curvature radius:10" (250mm)
Minimum curvature radius:10" (250mm)
5/8"5/8"
16mm
TOP BEND
STRAIGHT INSTALLATIONCURVED INSTALLATION STRAIGHT INSTALLATIONCURVED INSTALLATION
AL - Anodized Aluminum clips
CL - Stainless steel clips
LP - Anodized Aluminum profile AH - Anodized Aluminum clips
CH - Stainless steel clips
HP - Anodized Aluminum profile
16mm
CLIP OPTIONS PROFILE OPTIONCLIP OPTIONS PROFILE OPTION
All mounting clips length: 1⅝" (40mm)All profile length Follows model length. See page 5 for all available lengths.
1"(27mm)
1¼"(31mm)
Project : Type: SPECIFICATION SHEET
Page: 3 of 7
Due to continuous improvements, the information herein may be changed without notice9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7, P.: 514.523.1339 F.: 514.525.6107 www.iguzzini.com/us
UNDERSCOREIN/OUT
JP - R22 Last update: March 05, 2019
LOW CLEARANCE MOUNTING - 1" HEIGHTWITH EXPOSED CONNECTORS
HIGH PROFILE MOUNTING - 1½" HEIGHTWITH HIDDEN CONNECTORS
MODELS AND MOUNTING
1"(27mm)
1⅜"(37mm)
1¼"(32mm)
16mm
1"(25mm)
10mm6mm
SIDE BEND
Minimum curvature radius:6 mm : 2-½" (65mm)10 - 16mm : 5-⅞" (150mm)
Minimum curvature radius:16 mm : 5-⅞" (150mm)
STRAIGHT INSTALLATIONCURVED INSTALLATION STRAIGHT INSTALLATIONCURVED INSTALLATION
AL - Anodized Aluminum clips
CL - Stainless steel clips
LP - Anodized Aluminum profile AH - Anodized Aluminum clips
CH - Stainless steel clips
HP - Anodized Aluminum profile
3/4"(19mm)
3/4"(19mm)
16mm
CLIP OPTIONS PROFILE OPTIONCLIP OPTIONS PROFILE OPTION
7/8"(22mm)
All mounting clips length: 1⅝" (40mm)All profile length follows module length. See page 5 for all available lengths.
1/4" 3/8" 5/8"
5/8"
LUMEN MAINTENANCE
Version
TOP BEND
L70 B20 (ta25°) L70 B20 (ta40°) L80 B20 (ta25°) L80 B20 (ta40°)
>100 000H >100 000H >50 000H >50 000H
TOP BEND - HO >100 000H >65 000H >50 000H >50 000H
SIDE BEND 49 000H 32 500H 32 000H 25 000H
CCT(K)
CRI LOAD(W/ft) (lm/ft)
LUMENS(lm/W)
EFFICACY(cd)
MAX CANDELA
2.6W/ft3800K4600K
808575
3330
15
2900K
MODEL
IU06-S-838IU06-S-846
IU06-S-82985 32 15
10
2500K IU06-S-82585 32 15
6mm
SIDE BEND
2.6W/ft3800K4600K
8010090
3835
202900K
IU10-S-838IU10-S-846
IU10-S-82990 35 20
20
10mm
16mm
16mm
TOP BEND
PHOTOMETRIC DATAVisit iguzzini.com/us for complete photometric data.
Project : Type: SPECIFICATION SHEET
Page: 4 of 7
Due to continuous improvements, the information herein may be changed without notice9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7, P.: 514.523.1339 F.: 514.525.6107 www.iguzzini.com/us
UNDERSCOREIN/OUT
JP - R22 Last update: March 05, 2019
2500K IU10-S-82590 35 20
2.6W/ft3800K4600K
809085
3632
202900K
IU16-S-838IU16-S-846
IU16-S-82985 33 20
20
2500K IU16-S-82585 33 20
2.6W/ft3800K4500K
8090100
3538
202900K
IU16-T-838IU16-T-845
IU16-T-82980 32 20
25
2500K IU16-T-82580 32 20
3.5W/ft3600K4400K
80195200
5557
552800K
IU16-T-HO-836IU16-T-HO-844
IU16-T-HO-828195 55 55
55
2600K IU16-T-HO-826190 54 55
0.8'L: 10" (254mm)
1.0'L: 1' (304mm)
1.2'L: 1'-1⅞" (354mm)
1.3'L: 1'-3⅞" (404mm)
1.5'L: 1'-5⅞" (454mm)
2.3'L: 2'-3¾" (704mm)
1.7'L: 1'-7⅞" (504mm)
1.8'L: 1'-9¾" (554mm)
2.0'L: 1'-11¾" (604mm)
2.1'L: 2'-1¾" (654mm)
2.8'L: 2'-9⅝" (854mm)
2.5'L: 2'-5⅝" (754mm)
3.0'L: 2'-11⅝" (904mm)
3.1'L: 3'-1½" (954mm)
3.3'L: 3'-3½" (1004mm)
6.6'
2.6'L: 2'-7⅝" (804mm)
L: 6'-6⅞" (2004mm)
9.9'
13.1'
16.4'
23.0'
L: 9'-10¼" (3004mm)
L: 13'-1⅝" (4004mm)
L: 16'-5" (5004mm)
L: 22'-11¾" (7004mm)
L
Standard modules can be combined in continuous rows, to create other length options. Thanks to the side positioning of the connectors, it avoids dark areas.
To get the desired length, simply choose standard modules to combine (example : A+B). For in-line modules (B), no feed is required.
Each module is supplied with 3" (80mm) long cable with connector, to interconnect the modules, up to 23' (7004mm) long.
Project : Type: SPECIFICATION SHEET
Page: 5 of 7
Due to continuous improvements, the information herein may be changed without notice9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7, P.: 514.523.1339 F.: 514.525.6107 www.iguzzini.com/us
UNDERSCOREIN/OUT
JP - R22 Last update: March 05, 2019
AVAILABLE LENGTHS
COMBINED MODULES
TOP VIEW
Feed A B
1.2'
3.5'
2.3'
Project : Type: SPECIFICATION SHEET
Page: 6 of 7
Due to continuous improvements, the information herein may be changed without notice9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7, P.: 514.523.1339 F.: 514.525.6107 www.iguzzini.com/us
UNDERSCOREIN/OUT
JP - R22 Last update: March 05, 2019
FEED OPTIONS (INCLUDED)
Choosing between right or left feed matters when combining multiple modules, to avoid undesire shadow from the connectors.
* Only available for IU16 model.
IU10 - 10mmIU06 - 6mmMODEL IU16 - 16mm
SIDEBEND
825 - 2500K
838 - 3800K
829 - 2900K
846 - 4600K
825 - 2500K
838 - 3800K
829 - 2900K
846 - 4600K
825 - 2500K
838 - 3800K
829 - 2900K
846 - 4600K
825 - 2500K
838 - 3800K
829 - 2900K
845 - 4500K
826 - 2600K
836 - 3600K
828 - 2800K
844 - 4400K
TOPBEND
TOP BENDHO
MOUNTING
AL - Aluminum low support clips
AH* - Aluminum high support clips
CL - Stainless steel low support clips
CH* - Stainless steel high support clips
LP - Aluminum low profile
HP* - Aluminum high profile
FEED
A - Left feed (115mm)
D - Right feed (115mm)
B - Left feed (1500mm)
E - Right feed (1500mm) N - No feed (for in-line modules)
C - Left feed (3000mm)
FINISH
01 - White
LENGTH
Refer to configurations table on page 5.
FIXTURE - - - - 01
LEFT FEED RIGHT FEED
NO FEED
A - Cable with female connector Length= 4½" (115mm)
D - Cable with male connector Length= 4½" (115mm)
B - Cable with female connector Length= 59" (1500mm)
C - Cable with female connector Length= 118" (3000mm)
E - Cable with male connector Length= 59" (1500mm)
N - No feed (for in-line modules)
Female connector
TOP VIEW
Male connector
Driver on the RightDriver on the Left
ORDERING INFO
CH 1 (100W max)
CodeWatts Voltage Dimming protocol Box dimensions Max distance18AWG
4447-0024-096-UNV-D296 120-277V
28ft (8.5m)40
40
120-277V Lutron Hi Lume® 1% EcoSystem™(Soft-on, Fade to Black)
Lutron Hi Lume® 0.1% EcoSystem™(Soft-on, Fade to Black)
28ft (8.5m)5" x 4" x 3"(127 x 102 x 76mm)
5" x 4" x 3"(127 x 102 x 76mm)
5" x 4" x 3"(127 x 102 x 76mm)
4443-0024-040-UNV-D2
4443-0024-040-120-D3120V
DRY LOCATION
WET LOCATION
Lutron Hi Lume® 1% 2-wire(120V forward phase only)
30ft (9m)
Total in line max 60 or 80W 23' (7004mm)
SUGGESTED WIRING DIAGRAM
Remote Power Supply
POWER SUPPLY CODE : 4546-0024-200-2C-UNV-ND
Max 28' (8500mm) distance18AWG cable
CH 2 (100W max)
Remote Power Supply
Total in line max 60 or 80W 23' (7004mm)
Max 30' (9000mm) distance18AWG cable
(96W max)
120 or 277V
POWER SUPPLY CODE : 4447-0024-096-UNV-D2
Wmax for in line : 60 or 80W - 23' (7004mm) Wmax for driver box : 96W
*For longer remote distance, contact factory
Wmax for in line : 60 or 80W - 23' (7004mm) Wmax for driver box : 200W
120 or 277V
Project :Type: SPECIFICATION SHEET
Page: 7 of 7
Due to continuous improvements, the information herein may be changed without notice9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7, P.: 514.523.1339 F.: 514.525.6107 www.iguzzini.com/us
UNDERSCOREIN/OUT
JP - R22 Last update: March 05, 2019
4543 - Wet location connection box For cable Ø 3/16'' to 7/16'' (4mm to 11mm)
ACCESSORIES(TO BE ORDERED SEPARATELY)
REMOTE POWER SUPPLY OPTIONSRequirement for one (1) fixture: 2.6 or 3.5W/ft, 24V (Remote fixture only)
28ft (8.5m)12" x 5" x 2"(305 x 127 x 51mm)
4546-0024-200-2C-UNV-ND200 120-277V NON DIMMING
4549-0024-075-UNV-D1075 120-277V 0-10V 30ft (9m)14" x 5" x 3"(356 x 127 x 76mm)