(ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

12
(ITI31 0) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

Transcript of (ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

Page 1: (ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

(ITI310)

By Eng. BASSEM ALSAID

SESSIONS 8: Network Load Balancing (NLB)

Page 2: (ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

“Network Load Balancing (NLB)”

objectives in this session:- Overview.- Features in Network Load Balancing.- Models of Network Load Balancing.- Installing Network Load Balancing.- Create a New Network Load Balancing Cluster.- Add a Host to the Network Load Balancing Cluster.- Single Copy Cluster.- Installation of a Single Copy Cluster under Windows 2008 Server.

Page 3: (ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

“Network Load Balancing - Overview”

The Network Load Balancing (NLB) feature in Windows Server 2008 enhances the availability and scalability of critical mission servers. A single computer running Windows Server 2008 provides a limited level of server reliability and scalable performance. However, by combining the resources of two or more computers running one of the products in Windows Server 2008 into a single virtual cluster, NLBC can deliver the reliability and performance that Web servers and other mission-critical servers need.All versions of Windows Server 2008 supports Network Load Balance (NLB) for a group of 2 to a maximum of 32 nodes (We consider each server in a cluster as a node).

Page 4: (ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

The diagram above shows two connected Network Load Balancing clusters. The first cluster consists of two hosts and the second cluster consists of four hosts. This is one example of how you can use NLBC.

“Network Load Balancing - Overview”

Page 5: (ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

“Network Load Balancing - Overview”

In a Network Load Balancing configuration, a virtual IP address is assigned to each group. When a client invokes a service from the cluster, the request will be translated to one of the real addresses of the cluster servers depending to both: original settings and servers availability.

Page 6: (ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

“Features in Network Load Balancing”

NLB includes the following features:– Scalability.– High-availability.– Manageability.– Ease of use.

Page 7: (ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

“Models of Network Load Balancing”

Each server in a Windows Server 2008 NLBC could have two network adapters. This is recommended for maximum performance. In this case a first adapter is used for communication between cluster nodes and the other for communication with the clients. Generally, there are four Network Load Balancing models:

– Unicast with Single Network Adapter.– Unicast with Multiple Network Adapters.– Multicast with Single Network Adapter.– Multicast with Multiple Network Adapters.

Page 8: (ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

“Configuring Port”

Network Load Balancing is configured on a port by port basis or by range of ports. There are 3 options for controlling traffic:•Single Host: Traffic is forward to a node in the cluster.•Multiple Hosts: Traffic is distributed between the nodes in the cluster.•Disabled: No Action and no filter.

Page 9: (ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

Practice I: 1. Installing Network Load Balancing.2. Configuring NLB under Windows Server 2008.3. Adding Nodes to NLB.

Page 10: (ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

“Single Copy Cluster”

A single copy cluster (SCC) is a mailbox server cluster that uses shared storage configuration in a failover cluster to allow multiple servers to manage a single copy of storage groups.

If the node running a mailbox server cluster has problems, the mailbox server cluster goes offline briefly and let another node takes control of the mailbox server in the cluster. This process is called failover.

Administrator can manually move a server mailbox clustered between nodes in a cluster. This process is called a transfer process.

Page 11: (ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

“Installation of a Single Copy Cluster under Windows 2008 Server”

Main phases of Single Copy Cluster deployment:•Configuring storage.•Configuring Network.•Training the cluster.•Network configurations clusters.•Validate the failover cluster.

Page 12: (ITI310) By Eng. BASSEM ALSAID SESSIONS 8: Network Load Balancing (NLB)

NEXT SESSION

C9: Saturday 28-Jun-2014 12:00C10: Saturday 28-Jun-2014 13:30

Title: “Active Directory – PART 1”

THANKS