Iterlene IN/400 L ANTISTRIPPING AGENTS FOR HOT MIXES · Iterlene IN/400 L ANTISTRIPPING AGENTS FOR...
2
Iterlene IN/400 L ANTISTRIPPING AGENTS FOR HOT MIXES 1. APPLICATION ITERLENE IN/400 L is a liquid antistripping agent that: Guarantees a perfectly stable bond between bitumen and aggregates in any application condition (i.e. moisture, low ambient temperatures, acid nature aggregates) Ensures a mechanical stability. Reduces loss of stability Is highly compatible with bitumen without modifying its physical characteristics (penetration, softening point and rheological properties). ITERLENE IN/400 L as the following advantages: Suitable for hot, humid weather countries. Allows to convert the aggregates’ behaviour from hydrophilic to hydrophobic. Capable to enhance the bond between bitumen and dust- covered, acid aggregates (quartzite, porphyry, etc.). ITERLENE IN/400 L can be introduced either in line during the production process or directly in the binder’s tank. The product is essential to prevent the following pavement damages Aggregates loss Surface potholes Bitume non attivato Bitume attivato WITHOUT ANTISTRIPPING AGENTS WITH ANTISTRIPPING AGENTS Non activated Bitumen Activated Bitumen
Transcript of Iterlene IN/400 L ANTISTRIPPING AGENTS FOR HOT MIXES · Iterlene IN/400 L ANTISTRIPPING AGENTS FOR...
Iterlene IN/400 L ANTISTRIPPING AGENTS FOR HOT MIXES 1. APPLICATION
ITERLENE IN/400 L is a liquid antistripping agent that: � Guarantees a perfectly stable bond between bitumen and aggregates in
any application condition (i.e. moisture, low ambient temperatures, acid nature aggregates)
� Ensures a mechanical stability. � Reduces loss of stability � Is highly compatible with bitumen without modifying its physical
characteristics (penetration, softening point and rheological properties).
ITERLENE IN/400 L as the following advantages:
� Suitable for hot, humid weather countries. � Allows to convert the aggregates’ behaviour from hydrophilic to
hydrophobic. � Capable to enhance the bond between bitumen and dust-
covered, acid aggregates (quartzite, porphyry, etc.). ITERLENE IN/400 L can be introduced either in line during the production process or directly in the binder’s tank.
The product is essential to prevent the following pavement damages
Aggregates loss
Surface potholes
Bitume non attivato Bitume attivato
WITHOUT ANTISTRIPPING
AGENTS
WITH ANTISTRIPPING AGENTS
Non activated Bitumen Activated Bitumen
DETERMINATION OF THE AFFINITY BETWEEN AGGREGATES AN D BITUMEN
UNI EN 12697 - 11 PART A - ROLLING BOTTLE TEST
75
30
20
60
7070
80
8580
90
0102030405060708090
100
0 6 12 18 24 30Time (h)
Ove
rlap
ping
%
T.Q. 0,30% 0,40% 0,50% 0,60%
ITE
RLE
NE
/IN 400 L
73
95
75
97
0
10
20
30
40
50
60
70
80
90
100
DETERMINATION OF THE MIXES' WATER SENSIBILITY UNI EN 12697 - 12
NORMAL BITUMEN 50/70 (5,7%) MODIFIED BITUMEN 50/70 (5,7%)
ITSR %
0,40
%
T.Q
.
T.Q
.
0,40
%
ITE
RLE
NE
/IN 400 L
2. DOSAGE ITERLENE IN/400 L’ dosage varies from 0,30% a 0,60% by bitumen weight (neat or modified), depending on the geology of the aggregates used in the mix production.
3. COMPOSITION Alkylamidopoliamine.
4. PHYSICAL PROPERTIES Aspect viscose liquid Colour amber Density at 20°C 0,94÷0,96 g/cm3 Viscosity at 25°C 300±50 cP Flash point > 180°C pH basic
5. STORAGE
Sheltered from weather conditions and in its original drum tightly closed. 6. PACKAGE
In drums of 200 kg or small cistern of 950 kg. 7. SAFETY PRECAUTIONS
See product’s MSDS.
REV 01-2010
0
20
40
60
80
100
Ove
rlapp
ing
%
DETERMINATION OF THE AFFINITY BETWEEN AGGREGATES AN D BITUMENUNI EN 12697-11
PART C- BOILING TEST
0,30
%T
.Q
LIMESTONE BASALT PORPHYRY
0,40
%0,
50%
0,60
%
T.Q
T.Q
0,30
%0,
40%
0,40
%
0,30
%
0,50
%
0,50
%
0,60
%
ITE
RLE
NE
/IN 400-L
Silica Value
