SPECIFICATIONS FOR THE MODEL 40264 SPARK-GAP

SWITCH

ITEM PARAMETER SPECIFICATION

Dimension

Diameter Height

5.8 in. (14.8 cm) 2.7 in. (6.9 cm)

Environment

Dielectric

SF6 or oil

Output

Voltage range Maximum peak current Maximum charge transfer Inductance

25 to 100 kV 100 kA 0.3C <40 nH

Jitter (1 )(a) <10.0 ns (b)

<2.0 ns (c)

<1.0 ns (d)

Design Shot life Shots 10,000

Internal Dielectric gas Synthetic Air

Grade Instrument or better Water Content <5 ppm by weight Dew Point -65 C or lower Particle Size <5 microns Pressure 5-50 psig @ sea level

(a) 1 sigma measured from the trigger input to the high voltage output. (b) Measurement made using L-3 Trigger Generator, Model 40295, 100 kV, 100 nsec rise time. (c) Measurement made using L-3 Trigger Generator, Model 40168, 40 kV, 10 nsec rise time. (d) Measurement made using L-3 Trigger Generator, Model 40230, 100 kV, 13 nsec rise time.

This data sheet consists of L-3 Communications Corporation general capabilities information and does not contain controlled technical data as defined within the International Traffic in Arms (ITAR) Part 120.10 or Export Administration Regulations (EAR) Part 734.7-11.

2700 Merced Street, San Leandro, CA 94577 Telephone: (877) 829-6138 Fax: (510) 577-7247

www.L3NDT.com

This data sheet consists of L-3 Communications Corporation general capabilities information and does not contain controlled technical data as defined within the International Traffic in Arms (ITAR) Part 120.10 or Export Administration Regulations (EAR) Part 734.7-11.

This data sheet consists of L-3 Communications Corporation general capabilities information and does not contain controlled technical data as defined within the International Traffic in Arms

(ITAR) Part 120.10 or Export Administration Regulations (EAR) Part 734.7-11.