Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must...

21
1/12/2016 DirectHit Search http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Paging… 1/21 GENERAL PROCEDURES: FRAME REP... DESCRIPTION AND OPERATION: BODY DIAGRAMS (BODY REPAIRS) 50135 Body Repairs 2013 F250, 350, 450, 550 Super Duty DESCRIPTION AND OPERATION Procedure revision date: 07/16/2013 Body WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components must be new, genuine Ford Motor Company parts. Recycled, salvaged, aftermarket or reconditioned parts (including body parts, wheels or safety restraint components) are not authorized by Ford. Departure from the instructions provided in this manual, including alternate repair methods or the use of substitute components, risks compromising crash safety. Failure to follow these instructions may adversely affect structural integrity and crash safety performance, which could result in serious personal injury to vehicle occupants in a crash. The body consists of the following: Body on frame design, front frame section constructed of hydroformed rails Cabforward design Unique front structure constructed of hydroformed, HighStrength Low Alloy (HSLA) 350 steel rails Apillar and cowl side structure integrated with new front structure rails Magnesium upper radiator support HSLA steel lower radiator support Lightweight steel welded panel construction Bolted, removable front fenders, hinged doors, tailgate and hood A standard 2door regular cab or optional 4door SuperCab and 4door Crew Cab Standard 1.98 m (6.5 ft) or optional 2.44 m (8 ft) pickup bed length 2.44 m (8 ft) and 1.98 m (6.5 ft) pickup beds available with optional Dual Rear Wheels (DRW) configuration DRW pickup box fender flair constructed of polyurethane Reinforced Reaction InjectionMold Material (RRIM) Hood and front fenders constructed of dent resistant highstrength steel F250/450 pickup(s) available with the following wheelbase lengths. Pickups are configured on wide frame platform except as indicated: 3,480 mm (137 in) F250/350 regular cab, long box 3,607 mm (142 in) F250/350 SuperCab, short box 3,962 mm (156 in) F250/350 Crew Cab, short box 4,014 mm (158 in) F250/350 SuperCab, long box 4,369 mm (172 in) F250/350 Crew Cab, long box 4,470 mm (176 in) F450 Crew Cab, narrow frame F350550 chassis cab(s) available with the following wheelbase lengths: 3,581 mm (141 in) F350/450 chassis cab, narrow frame 4,115 mm (162 in) F350/550 chassis cab, narrow frame 4,191 mm (165 in) F350/550 chassis cab, narrow frame 4,470 mm (176 in) F350/550 chassis cab, narrow frame 4,795 mm (189 in) F350/550 chassis cab, narrow frame 5,085 mm (200 in) F450/550 chassis cab, narrow frame 5,105 mm (201 in) F450/550 chassis cab, narrow frame Bolt on front and rear bumpers Optional flexgate tailgate with integrated pullout step Structural adhesive used in roof reinforcements, cab back panel and pickup box wheelhouse outertoinner panel Sound deadener material applied to floor pan(s) Pickups available with Tough Bed® liner material The Tough Bed® liner material has special service requirements. If repairs are required, refer to Pickup Bed Side Panel in this section. For dimensional information, refer to the following illustrations. Body Margins NOTE:Dimensions apply to all cab and box styles unless otherwise indicated. Dimensions apply to right and left side.

Transcript of Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must...

Page 1: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Paging… 1/21

GENERAL PROCEDURES: FRAME REP...DESCRIPTION AND OPERATION: BODY ­ DIAGRAMS (BODY REPAIRS)501­35 Body Repairs 2013 F­250, 350, 450, 550 Super DutyDESCRIPTION AND OPERATION Procedure revision date: 07/16/2013

Body      

WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacementcomponents must be new, genuine Ford Motor Company parts. Recycled, salvaged, aftermarket or reconditioned parts(including body parts, wheels or safety restraint components) are not authorized by Ford.

Departure from the instructions provided in this manual, including alternate repair methods or the use of substitute components, riskscompromising crash safety. Failure to follow these instructions may adversely affect structural integrity and crash safety performance,which could result in serious personal injury to vehicle occupants in a crash.

The body consists of the following:

Body on frame design, front frame section constructed of hydro­formed railsCab­forward designUnique front structure constructed of hydro­formed, High­Strength Low Alloy (HSLA) 350 steel railsA­pillar and cowl side structure integrated with new front structure railsMagnesium upper radiator supportHSLAsteel lower radiator supportLightweight steel welded panel constructionBolted, removable front fenders, hinged doors, tailgate and hoodA standard 2­door regular cab or optional 4­door SuperCab and 4­door Crew CabStandard 1.98 m (6.5 ft) or optional 2.44 m (8 ft) pickup bed length2.44 m (8 ft) and 1.98 m (6.5 ft) pickup beds available with optional Dual Rear Wheels (DRW) configurationDRWpickup box fender flair constructed of polyurethane Reinforced Reaction Injection­Mold Material (RRIM)Hood and front fenders constructed of dent resistant high­strength steelF­250/450 pickup(s) available with the following wheelbase lengths. Pickups are configured on wide frame platform except asindicated:

3,480 mm (137 in) F­250/350 regular cab, long box3,607 mm (142 in) F­250/350 SuperCab, short box3,962 mm (156 in) F­250/350 Crew Cab, short box4,014 mm (158 in) F­250/350 SuperCab, long box4,369 mm (172 in) F­250/350 Crew Cab, long box4,470 mm (176 in) F­450 Crew Cab, narrow frame

F­350­550 chassis cab(s) available with the following wheelbase lengths:3,581 mm (141 in) F­350/450 chassis cab, narrow frame4,115 mm (162 in) F­350/550 chassis cab, narrow frame4,191 mm (165 in) F­350/550 chassis cab, narrow frame4,470 mm (176 in) F­350/550 chassis cab, narrow frame4,795 mm (189 in) F­350/550 chassis cab, narrow frame5,085 mm (200 in) F­450/550 chassis cab, narrow frame5,105 mm (201 in) F­450/550 chassis cab, narrow frame

Bolt on front and rear bumpersOptional flexgate tailgate with integrated pull­out stepStructural adhesive used in roof reinforcements, cab back panel and pickup box wheelhouse outer­to­inner panelSound deadener material applied to floor pan(s)Pickups available with Tough Bed® liner material

The Tough Bed® liner material has special service requirements. If repairs are required, refer to Pickup Bed Side Panelin this section.

For dimensional information, refer to the following illustrations.

Body Margins

NOTE:Dimensions apply to all cab and box styles unless otherwise indicated. Dimensions apply to right and left side.

Page 2: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Paging… 2/21

Item Description Specification Flushness Specification1 Grille opening panel to bumper 26 mm (1.02 in) ± 6.0 mm (0.23 in) ­

2 Hood to grille 5.5 mm (0.22 in) ± 3.0 mm (0.118in)

3.0 mm (0.118 in) ± 3.0mm (0.118 in)

3 Headlamp to hood 10.5 mm (0.413 in) ± 3.0 mm (0.11in)

­

4 Headlamp to grille 8.0 mm (0.31 in) ± 5.0 mm (0.20) ­

5 Fender to hood 4.2 mm (0.165 in) ± 2.0 mm (0.078in)

4.3 mm (0.169 in) ± 2.5mm (0.098 in)

6 Headlamp to fender 3.0 mm (0.11 in) ± 2.0 mm (0.07 in) 0.0 mm ( in) ± 2.0 mm(0.078 in)

7 Fender to door 5.0 mm (0.19 in) ± 2.5 mm (0.098in)

­

8 Front door to A­pillar 8.0 mm (0.31 in) ± 2.0 mm (0.07 in) 0.0 mm ( in) ± 2.5 mm(0.098 in)

9 Front and rear door to roof 5.0 mm (0.19 in) ± 2.0 mm (0.07 in) ­

10 Front door to corner panel (regular cab) front door to rear door(SuperCab, Crew Cab)

7.0 mm (0.275 in) ± 2.5 mm (0.098in)

0.0 mm ( in) ± 3.0 mm(0.118 in)

11 Rear door to corner panel 5.0 mm (0.20 in) ± 2.5 mm (0.098in) (Crew Cab)6.0 mm (0.236 in) ± 3.0 mm (0.118in) (SuperCab)

0.0 mm ( in) ± 3.0 mm(0.118 in)

Body Margins

Page 3: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Paging… 3/21

Item Description Specification Flushness Specification12 Tailgate to bumper 32.0 mm (1.25 in) ± 6.0 mm (0.23 in) ­

13 Tail lamp assembly to tailgate 6.0 mm (0.23 in) ± 3.5 mm (0.13 in) 1.5 mm (0.059 in) ± 3.0 mm (0.118 in)

14 Tailgate to box 5.0 mm (0.19 in) ± 3.5 mm (0.13 in) 0.9 mm (0.035 in) ± 2.0 mm (0.078 in)

15 Tail lamp to box 2.0 mm (0.07 in) ± 2.0 mm (0.07 in) ­

Underhood Dimensions

NOTE:Measurements are obtained on center, unless otherwise indicated.

Front Structure Dimensions

NOTICE: The front structure rails cannot be sectioned and must be serviced at the original factory seam locations or as anassembly if damaged. It is mandatory that the replacement section be installed as delivered at the original factory seamlocations or collision energy management can be compromised.

Page 4: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Paging… 4/21

NOTE:Front structure to A­pillar seams require sealing after installation. For additional information, refer to Sealersin this section.

Body Side Dimensions

Regular Cab

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 5: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Paging… 5/21

SuperCab

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 6: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Paging… 6/21

Crew Cab

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 7: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Paging… 7/21

Tailgate Opening Dimensions

NOTE:Measurements are obtained on center, unless otherwise indicated. Dimensions apply to all pickup box styles.

Frame and Underbody Dimensions

NOTE:A structural frame rail service kit is available for this vehicle. Refer to the included instruction sheet for installation guidelines,and Frame Membersin this section.

Frame Dimensions ­ Pickup, 3,480 mm (137 in) Wheelbase

Page 8: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Paging… 8/21

NOTE:Measurements are obtained on center, unless otherwise indicated.

Frame Datum Height ­ Pickup, 3,480 mm (137 in) Wheelbase

NOTE:Datum height determined measuring from lower edge of holes or slots, on center, unless otherwise indicated.

Frame Dimensions ­ Pickup, 3,607 mm (142 in) Wheelbase, F­250/350, Wide Frame

Page 9: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Paging… 9/21

NOTE:Measurements are obtained on center, unless otherwise indicated.

Frame Datum Height ­ Pickup, (142 in) Wheelbase, F­250/350, Wide Frame

NOTE:Datum height determined measuring from lower edge of holes or slots, on center, unless otherwise indicated.

Frame Dimensions ­ Pickup, 3962 mm (156 in) Wheelbase, F250/350, Wide Frame

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 10: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Pagin… 10/21

Frame Datum Height ­ Pickup, 3962 mm (156 in) Wheelbase, F250/350, Wide Frame

NOTE:Datum height determined measuring from lower edge of holes or slots, on center, unless otherwise indicated.

Frame Dimensions ­ Pickup, 4,013 mm (158 in) Wheelbase, F­250/350, Wide Frame

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 11: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Pagin… 11/21

Frame Datum Height ­ Pickup, 4013 mm (158 in) Wheelbase

NOTE:Datum height determined measuring from lower edge of holes or slots, on center, unless otherwise indicated.

Frame Dimensions ­3,581 mm (141 in) Wheelbase, F­350/450 Chassis Cab, Narrow Frame

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 12: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Pagin… 12/21

Frame Datum Height ­3,581 mm (141 in) Wheelbase, F­350/450 Chassis Cab, Narrow Frame

NOTE:Datum height determined measuring from lower edge of holes or slots, on center, unless otherwise indicated.

Frame Dimensions ­ 4,115 mm (162 in) Wheelbase, Chassis Cab

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 13: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Pagin… 13/21

Frame Datum Height ­ 4,115 mm (162 in) Wheelbase, Chassis Cab

NOTE:Datum height determined measuring from lower edge of holes or slots, on center, unless otherwise indicated.

Frame Dimensions ­ 4191 mm (165 in) Wheelbase, Chassis Cab

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 14: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Pagin… 14/21

Frame Datum Height ­ 4191 mm (165 in) Wheelbase, Chassis Cab

NOTE:Datum height determined measuring from lower edge of holes or slots, on center, unless otherwise indicated.

Frame Dimensions ­ Pickup, 4,369 mm (172 in) Wheelbase

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 15: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Pagin… 15/21

Frame Datum Height ­ Pickup, 4,369 mm (172 in) Wheelbase

NOTE:Datum height determined measuring from lower edge of holes or slots, on center, unless otherwise indicated.

Frame Dimensions ­ 4,470 mm (176 in) Wheelbase, F­350­550 Chassis Cab

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 16: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Pagin… 16/21

Frame Datum Height ­ Chassis Cab, 4,470 mm (176 in) Wheelbase, Chassis Cab

NOTE:Datum height determined measuring from lower edge of holes or slots, on center, unless otherwise indicated.

Frame Dimensions ­ 4724 mm (186 in) Wheelbase, Chassis Cab

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 17: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Pagin… 17/21

Frame Datum Height ­ 4,724 mm (186 in) Wheelbase, Chassis Cab

NOTE:Datum height determined measuring from lower edge of holes or slots, on center, unless otherwise indicated.

Frame Dimensions ­ 4,801 mm (189 in) Wheelbase, Chassis Cab

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 18: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Pagin… 18/21

Frame Datum Height ­ 4,801 mm (189 in) Wheelbase, Chassis Cab

NOTE:Datum height determined measuring from lower edge of holes or slots, on center, unless otherwise indicated.

Frame Dimensions ­ 5,080 mm (200 in) Wheelbase, Chassis Cab

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 19: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Pagin… 19/21

Frame Datum Height ­ 5,080 mm (200 in) Wheelbase, Chassis Cab

NOTE:Datum height determined measuring from lower edge of holes or slots, on center, unless otherwise indicated.

Frame Dimensions ­ 5105 mm (201 in) Wheelbase, Chassis Cab

NOTE:Measurements are obtained on center, unless otherwise indicated.

Page 20: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Pagin… 20/21

Frame Datum Height ­ 5105 mm (201 in) Wheelbase, Chassis Cab

NOTE:Datum height determined measuring from lower edge of holes or slots, on center, unless otherwise indicated.

Copyright © 2014 Ford Motor Company

Page 21: Item Description Specification Flushness Specification 1 ...WARNING: Collision damage repair must conform to the instructions contained in this workshop manual. Replacement components

1/12/2016 Direct­Hit ­­ Search

http://www.identifix.com/SearchFixes/Index?ROID=124749522&VID=2391882&VSM=1&LocationId=2#KW=frame&SOption=1&VETId=8&STMode=1&Pagin… 21/21

This publication contains material that is reproduced and distributed under a license from Ford Motor Company. No further reproductionor distribution of the Ford Motor Company material is allowed without the express written permission of Ford Motor Company. 

Copyright 2007 ­ 2014 Service Repair Solutions, Inc.