Isolators & Changeovers Over & low voltage release...
2
Email: [email protected] Contemporary range with user friendly features to ensure earth leakage protection. Earth fault Indicator on front face for easy fault diagnosis. Contact position indication on front face. Bi-connect terminals for simultaneous termination of bus bar & wires. Conforms to IEC 61008, IS12640-1 Sensitivity: 30, 100, 300mA ISI marked RCCB type: AC Rated Current: 25, 40, 63A Terminals: IP2X Rated Voltage: 230 / 415VAC Poles: 2P, 4P Supply Voltage: 230 VAC Connections: L, N Over Voltage: >267VAC Low Voltage: 60VAC<U<170VAC Terminal Size: 6 sq. mm. (flexible) 10 sq. mm. (rigid) Complies with IEC 60947-3 Rating: 63A-1600A Suitable for AC23 Lockable position: O Residual Current Circuit Breakers Isolators & Changeovers Over & low voltage release MZ215 Manual changeover switches 63A to 1600A smart solution for voltage protection MZ215 answers the need for voltage problems due to external factors like unstable Electricity board supply, loss of neutral, etc. MCB and RCCB in installation being current based devices do not provide protection against fluctuations of voltage. Voltage fluctuations cause damage to electronic equipments like TV, Refrigerator, Computer, etc. New aptis isolators offer the convenient solution for safety and improve aesthetics of your installation. Hager changeovers allow changeover from electricity boards supply to generator supply & vice-versa. Isolators Changeovers Allows manual switch, changeover switch or on load power circuit permutation. • Quick switching operation on silver contacts by spring sweeping action • 3 position with padlocking at zero position for maintenance on direct & extended handle • Compact dimension with back to back terminals • Site mountable wide range of accessories based on application needs Rating: 40A, 63A Rating: 25A, 40A Voltage: 415VAC Voltage: 415VAC Load Category: AC22A Load Category: AC22A Poles: 2P, 3P, 4P Poles: 2P, 4P Terminals: IP 2X finger touch proof Terminals: IP 2X finger touch proof
Transcript of Isolators & Changeovers Over & low voltage release...
Email: [email protected]
Contemporary range with user friendly features to ensure earth leakage protection. Earth fault Indicator on front face for easy fault diagnosis. Contact position indication on front face. Bi-connect terminals for simultaneous termination of bus bar & wires.
Conforms to IEC 61008, IS12640-1 Sensitivity: 30, 100, 300mAISI marked RCCB type: ACRated Current: 25, 40, 63A Terminals: IP2XRated Voltage: 230 / 415VAC Poles: 2P, 4P
Supply Voltage: 230 VAC Connections: L, NOver Voltage: >267VAC Low Voltage: 60VAC<U<170VACTerminal Size: 6 sq. mm. (flexible) 10 sq. mm. (rigid)
Complies with IEC 60947-3 Rating: 63A-1600ASuitable for AC23 Lockable position: O
Residual CurrentCircuit Breakers
Isolators & Changeovers Over & low voltage releaseMZ215
Manual changeover switches63A to 1600A
smart solution for voltage protection
MZ215 answers the need for voltage problems due to external factors like unstable Electricity board supply, loss of neutral, etc. MCB and RCCB in installation being current based devices do not provide protection against fluctuations of voltage. Voltage fluctuations cause damage to electronic equipments like TV, Refrigerator, Computer, etc.
New aptis isolators offer the convenient solution for safety and improve aesthetics of your installation.
Hager changeovers allow changeover from electricity boards supply to generator supply & vice-versa.
Isolators Changeovers
Allows manual switch, changeover switch or on load power circuit permutation.• Quick switching operation on silver contacts by spring sweeping action • 3 position with padlocking at zero position for maintenance on direct & extended handle • Compact dimension with back to back terminals • Site mountable wide range of accessories based on application needs
Rating: 40A, 63A Rating: 25A, 40AVoltage: 415VAC Voltage: 415VACLoad Category: AC22A Load Category: AC22APoles: 2P, 3P, 4P Poles: 2P, 4PTerminals: IP 2X finger touch proof Terminals: IP 2X finger touch proof
aptis enclosures - the right blend of aesthetics & safety
Safety - Meticulously designed to meet all safety
requirements.
Aesthetics - Well suited for all wall backgrounds.
Available in Standard color shade of RAL 9010 (pure white).
aptis distribution boards enclosures
aesthetics & safety
Range: SPN, TPN, One Way, Plug & Socket Colour: RAL 9016
Door type: Single Door, Double Door Mounting: Surface / Flush
Standard Accessories: Connecting Wires, mounting
Insulated Busbars, Cement Spill protection,
Shrouded Neutral Link, Earth link
Ratings: 160A, 250A H3 MCCB Frame sizes: x160, x250
MCCB types: 3P, 4P
aptis distribution boards are designed to suit the needs of the installations with optimum features at an affordable price. Aesthetics perfectly match to the interiors of the installation with assurance of complete safety.
H3 MCCB enclosures offer ready to install solution for the H3 MCCBs with sufficient space for installation. Hinge design range provides convenient maintenance solution, while integrated padlocking facility offers advantage of locking the enclosure. Enclosures are provided with gasket to avoid dust ingress in the MCCB.
Comprehensive range offering reliable solution for protection of installation against over-current. Bi-connect terminals for simultaneous termination of busbar & wires. Unique pull up terminals design with safety shutters for enhanced safety of users.
