Iso12944 Pronto
Transcript of Iso12944 Pronto
8/10/2019 Iso12944 Pronto
http://slidepdf.com/reader/full/iso12944-pronto 1/3
ISO 12944Corrosive protection of steel structures
by protective paint systems
Select Environment
Select DurabilitySelect System
A
BC
-
--
Pronto Industrial Paints
Award Winning British Coatings Manufacturer ISO 12944
All rights reserved (C) 2013
The ISO 12944 standard is designed to assist anyone involvedin the design and construction of steel structures
This guide is intended to help choose the most appropriatePronto System for the project under consideration
If you want further details, don’t hesitate to get in touch
www.prontopaints.co.uk
It’s as easy as ABC
8/10/2019 Iso12944 Pronto
http://slidepdf.com/reader/full/iso12944-pronto 2/3
A
Pronto Industrial Paints
Award Winning British Coatings Manufacturer
Corrosive Environment
(ISO 12944-2)
C1 - Very Low
C2 - Low
C3 - Medium
C4 - High
C5I - Very High (Industrial)
C5M - Very High (Marine)
Typical Environments
Exterior Interior
Heated buildings with cleanatmospheres, eg offices, shops,hotels and schools
Unheated buildings wherecondensation may occur, egsports halls, warehousing
Production rooms with highhumidity and some air pollution,eg food processing plants,laundries, breweries and dairies
Chemical plants, swimming pools,coastal boatyards
Buildings or areas with almostpermament condensation andwith high pollution
Buildings or areas with almostpermament condensation andwith high pollution
Atmospheres with low levelof pollution. Mostly rural areas
Urban and Industrialatmospheres, moderatesulphur dioxide pollution.Coastal areas with low salinity
Industrial areas and coastalareas with moderate salinity
Industrial areas with highhumidity and aggressiveatmospheres
Coastal and offshore areaswith high salinity
Select the Environment
Most projects take place in and around the city, this is normally classified as a C3 environment.
B Select Life to 1st Major Maintenance
System Durability
Low
Medium
High
Years to firstMajor Maintenance
Less than 5 years
5 to 15 years
More than 15 years
ISO 12944
How long do you want it to last beforedoing any major maintenance?Consider where the steelwork will end up,will you be able to access it readily
All rights reserved (C) 2013www.prontopaints.co.uk
8/10/2019 Iso12944 Pronto
http://slidepdf.com/reader/full/iso12944-pronto 3/3
Pronto Industrial Paints
Award Winning British Coatings Manufacturer
Corrosive Environment
C1
C2
C3
C4
C5I
C5M
System Durability
Low Medium High
P10
P10, P11, P50
P11, P50, P56
P53, P55
P55
P55
C Select a System
ISO 12944
v1.02 Mar 2013All rights reserved (C) 2013www.prontopaints.co.uk
P10
P11, P50
P11, P51, P56
P53, P55
P55
P55
P10
P11, P51
P52, P56
P54, P55
-
-
Pronto System
P10
P11
P50
P51
P52
P53
P54
P55
P56
Product ReferenceDry Film Thickness
(microns)
ISO 12944-5System Ref
5030
160
8040
8080
14060
16080
20080
6013050
605050
80
160
120
160
200
240
280
240
160
Product System
A2.01
A3.05
A2.06
A2.07A3.08
A3.09
A4.08
A4.09
A4.12A5I.04
A5M.05
A3.11
200:026202:000
450:004
100:006360:000
100:006360:000
100:006360:000
100:006360:000
100:006360:000
103:026100:006360:000
103:026100:006360:000
QD High Build Primer QD Gloss Finish
ProTect Vinyl
2 Pk Epoxy Primer 2 Pk Poly Finish
2 Pk Epoxy Primer 2 Pk Poly Finish
2 Pk Epoxy Primer 2 Pk Poly Finish
2 Pk Epoxy Primer 2 Pk Poly Finish
2 Pk Epoxy Primer 2 Pk Poly Finish
2 Pk Epoxy Zinc Rich2 Pk Epoxy Primer 2 Pk Poly Finish
2 Pk Epoxy Zinc Rich2 Pk Epoxy Primer 2 Pk Poly Finish
Note, the above systems are based upon a low alloy carbon steel substrateSurface Preparation - shotblast to Sa2.5 from rust grade A,B or C (See ISO 8501-1)For further information, consult the relevant product technical data sheets