www.jutzi.com ENERGY WATER SERVICE

ISO 9001:2000

279 Lorne AvenueStratford, ON N5A 6T1

Phone: (519) 271-9831Toll Free: (800) 265-8593Fax: (519) 271-1246

System CleaningThe Solution to Your Water Scale Problems

Keep Operating While You’re Cleaning

Online cleaning helps restore heat transfer efficiency by slowly dissolving rust, calcium, and iron deposits from your heat exchangers and other cooling system equipment - while you keep operating. The Formula MC line from D. H. Jutzi reduces the risk of unscheduled shutdowns while it keeps your equipment online and making money. Remove iron from closed cooling systems while your system is online. Remove calcium carbonate from cooling towers while your system is online.

Biodegrable/Environmental Friendly Cleaners

Formula MC cleaning procedures will passivate the metallurgy and protect systems from corrosion and plugging. Unlike acid cleaning, Formula MC products clean at a neutral pH and require no special neutralization. Your processes also run better by keeping your equipment within specifications and by minimizing rust-related problems.

Benefits To You

Effective!! Can dissolve approximetely 2 pounds of scale per gallon.Economical! Save money!! Reduce operating costs by reducing energy consumption with clean heat exchanger surfaces.Non-Hazardous!! Cleaning is performed at neutral pH which means it is non-corrosive to your system and will ensure safe operation.Biodegradable!! Disposal using sanitary sewersSafe!! Most cleaners can be held in the open hand without injury.

Fuel Loss Due To Scale

The economics show that a clean boiler will save far more money in fuel than it could ever use in water treatment products.

0

10

20

30

40

50

60

70

Fuel Loss

1/32"1/25"1/20"1/16"1/8"1/4"3/8"1/2"

Hardness Scale

Scale + Formula MC 6280

www.jutzi.com ENERGY WATER SERVICE

System Cleaning

Formulation for Determining Volume to Plate & Frame Heat Exchangers

1. Multiply the W x H x the thickness of the plate pack and that number is the total cubic inches.2. Take the cubic inches and divide by 1728, and it is now converted to cubic feet.3. Multiply the cubic feet by 7.5 and you now have the total gallons.4. Divide the total gallons by 2 and you now have the volume inside the plates.5. Divide the volume inside the plates by 2 and you now have the quantity of Formula MC 6280 you will need to clean the exchanger.

Chemical ProductsFormula MC 6210 - Ion Exchange Resin CleanerFormula MC 6220 - Pre-Operation CleanerFormula MC 6260 - Mud, Oil & Slime CleanerFormula MC 6270 - Rust and Iron Scale CleanerFormula MC 6280 - Calcium Carbonate CleanerFormula MC 6340 & 6350 - RO Membrane Cleaner

ApplicationsShell & Tube Heat ExchangersPlate & Frame Heat exchangersChillers & CondensersEvaporative CondensersBoilers, Steam & Hot waterChilled & Hot Water Loops