ISO 9001-2000 Push-Pull Slide Gate - Series “E...
Transcript of ISO 9001-2000 Push-Pull Slide Gate - Series “E...
Canada 1-800-263-1942 | USA 1-800-263-7782 | [email protected] An ISO 9001-2008 Registered Company
LSP FlangedTop View
Push-Pull Slide Gate - Series “E”For Gravity Flow Applications and Vacuum
Bolt Thru Pipe Flange ConnectionTop View
ISO 9001-2000
. . . products made for conveying!
Canada 1-800-263-1942 USA [email protected] • www.lorenz.ca45
Standard Features• Stainless steel material contact points
• Dust tight seals• Lightweight aluminum frame, corrosion resistant
• Rated for 82oC (180oF)
Push-Pull Slide GateSeries “E”
For Gravity Flow Applications and Vacuum
Available in sizes 2” to 12”
Standard Features
• Stainless steel material contact points• Dust tight seals
• Lightweight aluminum frame, corrosion resistant
• Rated for 82° (180°F)
Options• 316 stainless material contact
• High temperature service• Tube stub adapters• Special service inlet
43
Available in sizes 2" to 12"Side View
Side View
Consult the Lorenz Sales Team for further product information or visit: www.lorenzproducts.com the conveying products people
Series “E” Slide GatePneumatic actuated Slide Gate for vacuum, low pressure (dilute phase)* and gravity conveying systems
*(Dilute phase up to 15 psig max.)
• Positive Blade Lock (PBL) between blade & cylinder rod• Internal magnetic piston, cushioned air cylinder
• Polished stainless steel blade • Active Compression Seals (ACS)• Light weight aluminum body construction • Temperature rated for up to 82º C (180º F)
• Wall thickness of 16, 14, & 11 gauge, schedule 10, 40 & 80• Fully tested prior to shipping
Standard Features
Options • Position switches 5 volt to 240 volt AC/DC • Special seal confi gurations • Proximity switches • Solenoids 110 volt AC or 24 volt DC • Oversized cylinders • Double acting or single acting spring • Valve body sealed for air purging return solenoid or manual lever valve • High temperature modifi cations • NEMA 7-9 hazardous locations • Manual hand crank, hand wheel • Electric actuation or chain wheel operation • Special service inlet • Prewired terminal boxes
"BTV" - Bolt Through Valve
"BBH" - Blind Bolt Hole150lb. pipe fl ange pattern with tapped holes for mounting between fl anges
38
Pneumatic actuated Slide Gate for vacuum, low pressure (dilute phase)* and gravity conveying systems
"BTV" - Bolt Through Valve
"BBH" - Blind Bolt Hole
"SB" - Stud Bolt150lb. pipe fl ange pattern with studs for bolting to fl anges
Canada 1-800-263-1942 | USA 1-800-263-7782 | [email protected] An ISO 9001-2008 Registered Company
Series “E” Slide Gate
All dimensions in inches
39
“BBH” - Blind Bolt Hole & "SB" - Stud Bolt
"BTV" - Bolt Through Valve
Consult the Lorenz Sales Team for further product information or visit: www.lorenzproducts.com the conveying products people
Series “E” Slide GatePneumatic actuated Slide Gate for vacuum, low pressure (dilute phase)* and gravity conveying systems
"LSP" - Lightweight Stud Pattern
Tube & Pipe Stubs for compression couplings
Pneumatic actuated Slide Gate for vacuum, low pressure* and gravity conveying systems
Stud bolt fl anged tube connection for light duty
applications*(Dilute phase up to 15 psig max.)
• Positive Blade Lock (PBL) between blade & cylinder rod• Internal magnetic piston, cushioned air cylinder
• Polished stainless steel blade • Active Compression Seals (ACS)• Light weight aluminum body construction • Temperature rated for up to 82º C (180º F)
• Wall thickness of 16, 14, & 11 gauge, schedule 10, 40 & 80• Fully tested prior to shipping
Standard Features
Options • Position switches 5 volt to 240 volt AC/DC • Special seal confi gurations • Proximity switches • Solenoids 110 volt AC or 24 volt DC • Oversized cylinders • Double acting or single acting spring • Valve body sealed for air purging return solenoid or manual lever valve • High temperature modifi cations • NEMA 7-9 hazardous locations • Manual hand crank, hand wheel or • Electric actuation chain wheel operation • Special service inlet • Prewired terminal boxes
36
"TPS" - Tube & Pipe Stubs
Canada 1-800-263-1942 | USA 1-800-263-7782 | [email protected] An ISO 9001-2008 Registered Company
Series “E” Slide Gate
"TPS" - Tube & Pipe Stubs "LSP" - Lightweight Stud Pattern
All dimensions in inches
37