ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools...

28
Cat.No.Tk083p NITTO KOHKI CO.,LTD. JQA-2042 NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 JQA-EM4057 NITTO KOHKI CO.,LTD. ISO 14001

Transcript of ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools...

Page 1: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

Cat.No.Tk083p

NITTO KOHKI CO.,LTD.

JQA-2042 NITTO KOHKI CO.,LTD.Machine Tools Division

ISO 9001

JQA-EM4057NITTO KOHKI CO.,LTD.

ISO 14001

Page 2: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

NEEDLE SCALER

JET CHISELAIR HAMMER

AUTO CHISELPNEUMATIC SCALER

SUPER KELENPNEUMATIC CHIPPING HAMMER

AIR CHIPPERPNEUMATIC GRINDER

MYTONPNEUMATIC DIE GRINDER

AIR SONICPNEUMATIC HAND DRILL

AIR DRILLPNEUMATIC BELT SANDER

BELTONPNEUMATIC DUST-FREE SANDER

ORBITAL SANDERPNEUMATIC COMPACT SANDER

PALM ORBITAL SANDERHANDY PNEUMATIC SANDER

FREE SANDERPNEUMATIC RECIPROCATING SANDER

LINE SANDERPORTABLE PRECISION FINISHING FILE

SUPER HANDPORTABLE FINE FINISHING FILE

MICRO AIR HANDPNEUMATIC HACKSAW

SUPER SAWPORTABLE CHAMFERING TOOLS

BEVELERPNEUMATIC RADIAL CHAMFERING TOOL

CIRCUIT BEVELER

Whether you just glance through thisbooklet or give it an intensive reading, weare sure you'll agree that NITTO KOHKI'sportable hydraulic and electric machinesand pneumatic hand tools are among thefinest precision engineered equipmentto be found today.

HI CUPLA Series

"delvo" Electric Screwdrivers, Spring Balancer,Linear Motor Driven Free Piston System

Machine Tools

NOTES ON USING TOOLS – Important Safety Instructions

Pneumatic & Electric Power Tools,Labor-saving plus Improved Work Efficiency!

Manufacturing

Various peening works

Rivet calking, bushinserting & removing

-

-

Sanding, grinding,chamfering, finishing

Metal working,surface smoothing

Trimming, chamferingcorner rounding

Smoothing,intermediate finishsanding

Smoothing,intermediate finishsanding

Surface sanding,rust & stain removal

Plane sanding,groove sanding

Precision filing offlash, chamfering,sanding, groovefinishing

Cuts with small radii

Various drilling works

Chamfering of largeworkplaces

Chamfering of diesand machine

Paint & rust scaling

Sheet metal cutting,paint chiseling, rivetpunching

-

-

-

Chamfering, roughgrinding, moldgrinding

Various grindingworks

Spot smoothing,surface regulation,finish sanding

Surface smoothingof steel products,finishing of pressedproducts

Surface smoothingof steel products,finishing of pressedproducts

Spot smoothing,corner rounding,surface smoothing

Spot smoothing,surface regulation

Trimming, filing innarrow space,surface regulation

To cut mild steelplates, aluminum,plastics and othermaterials

Various drilling works

-

Chamfering of steelplate

Precision filing offlash, chamfering,groove finishing

Sheet-Metal Working

1

Page 3: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

Page

3-4

5-6

7

8

9-10

11-12

12

13-14

15

15

16

17

18

19

19

20-22

22

23

24

25

26

Spatter, chips &sludge scaling

Flux chiseling,plaster chiseling

Spatter, sludge andrust chiseling, scaling

-

Bead grinding, crosssection grinding

Bead grinding

Bead grinding, rustremoval, chamfering,section finishing

Surface sanding ofpre-welded part

Surface sanding ofpre-welded part

-

-

-

Finish filing

-

Initial boring for gascutting by welder

-

Surface chamfering ofpre-welded shaped steel parts

-

-

Paint chiseling

Paint chiseling

Paint chipping

Grinding of pre-painted surface,buffing

Pre-painted surfaceregulation

Rough grinding, rust& paint removal,spot smoothing

Ground work sanding

Ground work sanding

Sanding of pre-painted, plasteredsurface, water sanding

Sanding of plasteredsurface, intermediatefinish sanding

Precision filing ofpre-painted surface,sanding

-

Paint scrambling(w/attachment)

Chamfering of steelplate

-

Sand blasting &chiseling

Trimming, sandchiseling

Black surface scaling,scaling of ingotremnant in ladle

Sand chipping

Trimming, chamfering

Mold correction,trimming

Trimming, chamfering,spatter grinding,die-cast finishing

Trimming, surfacefinishing of die-casting

Trimming, surfacefinishing of die-casting

Mold correction

Mold correction

Trimming

-

-

-

Chamfering of castmolds

Rust scaling,welded-part finish

Various automotiverepair works

Removal of weeds,shells, concretechipping

Removal of weeds,shells, etc., concretechipping

Additional grinding,rust removal, surfacesmoothing

Precision grindingof parts

Welding chip grinding,finish grinding, fitting

Correction of grinding(finish works)

Correction of grinding(finish works)

Paint sanding ofautomotive body

Paint sanding ofautomotive body

Trimming, precisionsanding of parts

To cut the body plateof automotive vehiclesor shaped steel

Drilling, removal ofspot-welded parts

Chamfering of steelplate

-

-

-

-

-

-

Grinding of pipecross section andinner surface

Grinding of pipe &equipment surfaceface section

Precision finishing

Precision finishing

Sanding of plasteredsurface, and test piecesurface

Synthetic resin sanding

Filing, superfine filingfor profile correction

Trimming Trimming, precisionsanding of parts

Filing, superfine filingfor profile correction

To cut fiber plates.To cut fiber-reinforcedplastic plates

-

-

-

-

-

-

-

Sanding

Correction grindingof molded products,rough grinding

Finish sanding offurniture, profilecorrection of plasticproducts

Precision sanding

Precision sanding

Finish sanding, curvedsurface sanding,sanding of routergroove

Rough finish sanding

Filing, superfine filingfor profile correction

-

-

Drilling

-

-

Surface coarsening ofstone and concreteproducts

Concrete breaking,chiseling of stick

Concrete chiselingfrom framework,removal of linoleumfrom floor base

Chipping of stoneproducts

Chamfering of stoneproducts, honing

Additional grindingof constructionmaterials & parts

Grinding of parts &elements, repairservices of tools

Surface sanding ofconstructed materials

Surface sanding ofconstructed materials

Sanding of stoneproducts and floormaterials

Inner surface sandingof channeled parts

Correction sanding ofmetal parts

-

-

Sash works

Chamfering of steelplate

Chamfering of columns(HB-15B)

Welding Painting Metal Casting &Forging

Automotive &Ship Building

Chemical Engineering Wood Working & Art Construction

CONTENTS

2

Page 4: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

Powerful scaling with multi-needles

Never skips a blow, cleans and descales all jobs fast. Gets into extremely restricted areas...

An asset in any industry...de-slagging, de-sputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas. Maximum performance in a light-weight,minimum- size air tool, Jet Chisel delivers years of trouble-free, efficient operation. And it's a tool that gets all the way down to the surface of matters. Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient time-saver in ship-board applications, too.

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1

qty

inch

kg

AJC-16

0.6 {6}

0.07

6,000

OD 2 × 7 pcs. or OD 3 × 3 pcs.

3/8

0.98

Model

Rated Air Pressure

Air Consumption (No load)

Stroke Speed

Needle

Hose Size

Mass (Weight)

JT-20

0.6 {6}

0.2

4,000

OD 2 × 29 pcs. or OD 3 × 12 pcs.

3/8

2.4

JEX-20

0.6 {6}

0.2

4,000

OD 2 × 29 pcs. or OD 3 × 12 pcs.

3/8

2.75

Needle OD 3 mm × 180 mm : 3 pcs. (Needle OD 3 mm × 180 mm : 3 pcs. on the body)

Bushing R 3/8 × NPT 3/8 : 1 pc.Hose Nipple R 3/8 × 3/8 : 1 pc.

Needle OD 3 mm × 180 mm : 12 pcs. (Needle OD 3 mm × 180 mm : 12 pcs. on the body)

Bushing R 3/8 × NPT 3/8 : 1 pc.Hose Nipple R 3/8 × 3/8 : 1 pc.

Needle OD 3 mm × 180 mm : 12 pcs. (Needle OD 3 mm × 180 mm : 12 pcs. on the body)

Bushing R 3/8 × NPT 3/8 : 1 pc. Hose Nipple R 3/8 × 3/8 : 1 pc.

Slim TypeAJC-16ModelPopular TypeJT-20Model

NEEDLE SCALER JET CHISEL SCALING

JEX-20ModelLow Vibration Type

190 mm 245 mm 244 mm

JET CHISEL

Reinforcement of a welded part with the shot peening effect increases strength by imparting residual stress to the surface of the workpiece through the high speed impact of the needles. Highly suitable for effective reinforcement of deteriorated welded parts.

Shot Peening Effect Full Automatic SystemThe only unit of it’s kind on the market without springs. This means no springs to break...no irregular power... and the advantage of low air consumption.

3

Page 5: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

NEEDLE SCALER JET CHISELSCALING

Electric Needle Scaler

Optional Needles

EJC-32A

Model

Rated Air Pressure

Air Consumption (No load)

Stroke Speed

Needle

Hose Size

Mass (Weight)

Model

Specifications

Standerd Accessories

MPa {kgf/cm2}

m3/min

min-1

qty

inch

kg

JC-16

0.15

4,000OD 2 × 29 pcs.

1.4

JEX-24

0.27

4,000OD 2 × 53 pcs. or OD 3 × 23 pcs.

2.7

JEX-2800A

0.43

3,700

3.1

JEX-28

0.35

4,500

3.5

Needle OD 2 mm × 150 mm : 58 pcs. (Needle OD 2 mm × 150 mm : 29 pcs. on the body)

Bushing R 3/8 × NPT 3/8 : 1 pc. Hose Nipple R 3/8 × 3/8 : 1 pc.

Needle OD 3 mm × 180 mm : 23 pcs. on the body 6 mm Hex. Socket Screw Key : 1 pc. Bushing R 3/8 × NPT 3/8 : 1 pc. Hose Nipple R 3/8 × 3/8 : 1 pc.

The same excellent performance as our air tool!

Standard AccessoriesNeedle OD 3 mm × 180 mm : 30 pcs.

(Needle OD 3 mm × 180 mm : 15 pcs. on the body)

Needle OD 4 mm × 180 mm : 14 pcs. Needle OD 3 mm × 180 mm : 28 pcs. on the body Needle Supporter OD 4 mm : 1 pc. 6 mm Hex. Socket Screw Key : 1 pc. Bushing R 3/8 × NPT 3/8 : 1 pc. Hose Nipple R 3/8 × 3/8 : 1 pc.

Needle OD 4 mm × 180 mm : 14 pcs. Needle OD 3 mm × 180 mm : 28 pcs. on the body Needle Supporter OD 4 mm : 1 pc. Bushing R 3/8 × NPT 3/8 : 1 pc. Hose Nipple R 3/8 × 3/8 : 1 pc.

UniversalTypeJEX-24Model Heavy-duty

TypeJEX-28Model JEX-2800AModel

Operated with standard electric supply to households.Special long and slim barrel design suitable for narrow corners.Double-insulated motor does not need grounding.Free subhandle position best fit to your working situation.

PN Description QtyTA98780TA98781TA9A213TA9A214TA98782TA9A216TA9A217TA9A218TA98783TA9A220TA9A221

100 pcs.100 pcs.50 pcs.50 pcs.100 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.

Needle OD 2 mm × 150 mmNeedle OD 2 mm × 180 mmNeedle OD 2 mm × 300 mmNeedle OD 2 mm × 500 mmNeedle OD 3 mm × 180 mmNeedle OD 3 mm × 300 mmNeedle OD 3 mm × 500 mmNeedle OD 3 mm × 800 mmNeedle OD 4 mm × 180 mmNeedle OD 4 mm × 300 mmNeedle OD 4 mm × 500 mm

Specifications

W

A

min

min-1

qty

m

kg

115 V AC, 50/60 Hz

2.8

230 V AC, 50/60 Hz

1.4

EJC-32A

300

30

3,000OD 2 × 32 pcs. or OD 3 × 15 pcs.

5

4.5

Model

Power Supply

Rated Power Consumption

Rated Current

Rated Duty

Stroke Speed

Needle

Power Cord Length

Mass (Weight)

JC-16Model LightweightType

158 mm 237 mm264 mm

247 mm

150 mm

520 mm

225 mm

159 mm173 mm 173 mm

Low-vibration Type

PN Description Qty ModelTP00338TP00337TQ05210TQ04554TP00290TP02244TP02245TP01499TP01461TP01462TP16475TP16301

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.

JT-20,JEX-20

AJC-16

JEX-24

EJC-32A

JEX-28,JEX-2800A

JC-16

Needle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 2 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mmNeedle Supporter OD 4 mmNeedle Supporter OD 2 mmNeedle Supporter OD 3 mm

230 V AC only

OD 2 × 66 pcs. or OD 3 × 28 pcs. or OD 4 × 14 pcs.

0.6 {6}

3/8

4

Page 6: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

SCALING

A special spool valve inside gripassures excellent durability

The A-300 Auto Chisel is designed for speeding up the repair and sheet metal works of automobiles, etc. Being light and powerful, labor can be reduced remarkably. This tool enables the work to be done in narrow space where ordinary hammering work is impossible. Thus the skill usually needed in hammering work is eliminated. The respective parts employ high quality material and are subjected to high precision process.

Model

Model

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1

inch

kg

A-300

0.6 {6}

0.3

2,600

1/4

1.7

Model

Rated Air Pressure

Air Consumption (No load)

Stroke Speed

Hose Size

Mass (Weight) Bushing R 1/4 × NPT 1/4 : 1 pc. Hose Nipple R 1/4 × 1/4 : 1 pc.

A-300

Optional AttachmentsPN Description Qty PN Description Qty

TP00572TP00573TP04606TP00575TP00576TP00577TP00578TP00579TP00580TP00581TP00582TP00583

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.

No.1001 Blank ChiselNo.1002 Flat Chisel No.1003 Sheet Metal Chisel ANo.1004 Sheet Metal Chisel B No.1005 Silencer Cutting ChiselNo.1006 Rubber Bushing Remover No.1007 Spot Weld BoosterNo.1008 Bushing ToolNo.1009 PunchNo.1010 Bushing Removing ToolNo.1011 Sheet Metal PunchNo.1012 20 mm Bending Chisel

TP00584TA90051TP00586TP00585TP00589TP00590TP00591TP04995TP05244TP05775TP05801

-

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.-

No.1013 Fork Chisel 24No.1014 Panel CrimperNo.1016 Fork Chisel 35No.1017 Fork Chisel 15No.1018 38 mm ScraperNo.1019 60 mm ScraperNo.1020 60 mm Concave ScraperNo.1023 Sheet Metal Chisel CNo.1024 Moilpoint ChiselNo.1025 Rivet Removing PunchNo.1026 Rivet Caulking Chisel -

185 mm

160 mm

AIR HAMMER AUTO CHISEL

AUTO CHISEL

5

Page 7: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

SCALING

Applications and wide variety of optional attachmentsNo. 1001 Blank Chisel (TP00572)For a variety of sheet metal work, bending,and rivet closing jobs

No. 1002 Flat Chisel (TP00573)Puts increased efficiency into scraping,peeling spot welds, and cutting off bolts andpins

No. 1003 Sheet Metal Chisel A (TP04606)Cuts shapes in sheet metal fast

No. 1004 Sheet Metal Chisel B (TP00575)Just the chisel for cutting off sheet metal bodypanel

No. 1005 Silencer Cutting Chisel (TP00576)A quick cut-off chisel for muffler piping

No. 1006 Rubber Bushing Remover (TP00577)Helps you remove idle arm sleeves andbushings in record time

No. 1007 Spot Weld Booster (TP00578)Ideal for peeling off spot welded points andcutting off pins

No. 1008 Bushing Tool (TP00579)Puts speed and ease into the job of bushinginsertion

No. 1009 Punch (TP00580)For driving out pins and rivets, and fitting andremoving bearings and races

No. 1010 Bushing Removing Tool (TP00581)A faster servicing aid in removing bushings

No. 1011 Sheet Metal Punch (TP00582)Opens holes for bolts and rivets

No. 1012 20 mm Bending Chisel (TP00583)Helps you in peening and removing slagaround welds

No. 1013 Fork Chisel 24 (TP00584)Disconnecting tie rod ends and ball joints

No. 1014 Panel Crimper (TA90051)Bending sheet metal: external body plates,doors, fenders, etc.

No. 1016 Fork Chisel 35 (TP00586)Disconnecting tie rod end ball joints

No. 1017 Fork Chisel 15 (TP00585)Disconnecting tie rod end ball joints

No. 1018 38 mm Scraper (TP00589)Peeling paint & removing rust from iron plate

No. 1019 60 mm Scraper (TP00590)Peeling paint & removing rust from iron plate

No. 1020 60 mm Concave Scraper (TP00591)Removing incrustation from pipe

No. 1023 Sheet Metal Chisel C (TP04995)Cuts shapes in sheet metal fast

No. 1024 Moilpoint Chisel (TP05244)Breaking-up concrete, removing sand fromcastings

No. 1025 Rivet Removing Punch (TP05775)Removing rivets from brake lining of heavyduty cars

No. 1026 Rivet Caulking Chisel (TP05801)Caulking brake lining of heavy duty cars

AIR HAMMER AUTO CHISEL

6

Page 8: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

SCALING

Industrial and shipboard descaling and cleaning The unique scaler preforms scores of industrial and shipboard descaling and cleaning jobs quickly, efficiently and economically. Removes old paint and rust, dislodges solid matter or scale tar. Removes concrete adhering to panels, conveyors, mixers. Strips off bark from lumber, and scores of other applications.

Model

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1

mm

inch

mm

kg

S-250

0.6 {6}

0.27

2,500

12.7

3/8

630 × 49

4.1

Model

Rated Air Pressure

Air Consumption (No load)

Stroke Speed

Size of Chisel Shank

Hose Size

Dimension

Mass (Weight)

S-500

0.6 {6}

0.27

2,500

12.7

3/8

890 × 49

4.7

S-1000

0.6 {6}

0.27

2,500

12.7

3/8

1,470 × 49

6.1

38 mm Bend Scraper (No.2005) : 1 pc. on the body

38 mm Bend Scraper (No.2005) : 1 pc. on the body

38 mm Bend Scraper (No.2005) : 1 pc. on the body

S-1000Model

S-500ModelS-250

Model

Optional Chisels

PN Description QtyTP03645TP03646TP03647TP04010TP04552TP04553TP04554

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.

No.2001 60 mm ScraperNo.2002 38 mm Scraper

No.2005 38 mm Bend Scraper

No.2007 60 mm Bend Scraper2001 2002 2003 2004 2005 2006 2007

PNEUMATIC SCALER SUPER KELEN

SUPER KELEN

7

Page 9: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

SCALING

Now chipping after welding is easy! The AIR CHIPPER are compact, lightweight and economical tools to have on hand for all kinds of chipping work. Easy chisel replacement is made to excellent operation. The straight design is suitable for operation at narrow and deep places. In addition, the ACH-16 has many features on the followings.....

without touching the work piece by the chisel.

structure. Especially effective on continuous operation.

lightweight type, and weight only one kilogram

Model

Rated Air Pressure

Air Consumption (No load)

Stroke Speed

Size of Chisel Shank

Hose Size

Mass (Weight)

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1

mm

inch

kg

ACH-16

0.6 {6}

0.15

6,000

OD 10.5

3/8

0.9

CH-24

0.6 {6}

0.2

4,000

12.7 sq.

3/8

1.7

Flat Chisel 20 × 120 : 1 pc. on the body Bushing R 3/8 × NPT 3/8 : 1 pc. Hose Nipple R 3/8 × 3/8 : 1 pc.

Curved Flat Chisel 25 × 155 : 1 pc. on the body Bushing R 3/8 × NPT 3/8 : 1 pc. Hose Nipple R 3/8 × 3/8 : 1 pc.

Model

ACH-16Model

CH-24

Optional Chisels PN Description Qty

TQ03431TQ03453TQ03549TQ03452

TQ03452TQ03549TQ03453TQ03431

1 pc.1 pc.1 pc.1 pc.

Flat Chisel 20 × 120Curved Flat Chisel 20 × 120Flat Chisel 11 × 120Flat Chisel 20 × 180

PN DescriptionChisel for Air Chipper CH-24

Chisel for Air Chipper ACH-16

QtyTP15234TP15233TP15166

TP15166TP15233TP15234

1 pc.1 pc.1 pc.

Straight Flat Chisel 12.7 × 165Flat Chisel 25 × 155Curved Flat Chisel 25 × 155

147 mm

184 mm

AIR CHIPPERPNEUMATIC CHIPPING HAMMER AIR CHIPPER

8

Page 10: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

GRINDING & SANDING

A wide variety of models are available to a particular job!

MLG-25Model

0.6 {6}

0.75 (No load) 1.1 (Load)

7,600

180

3/8

Model

Rated Air Pressure

Air Consumption (No load)

Free Speed

Depressed Center Grinding Wheel

Hose Size

Mass (Weight)

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

6 mm Hex. Socket Screw Key : 1 pc. 10 mm Hex. Socket Screw Key : 1 pc. Bushing R 3/8 × NPT 3/8 : 1 pc. Handle Ass’y : 1 set. Wheel Guard Ass’y : 1 set

Standard Accessories

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

MLG-25

0.6 {6}

0.42

19,000

58

1/4

0.6

MLG-40

0.6 {6}

0.45 (No Load) 0.91 (Load)

13,000

100

3/8

1.5

MAGW-40

0.6 {6}

0.68 (No load) 0.82 (Load)

13,000

100

3/8

1.55

Model

Rated Air Pressure

Air Consumption

Free Speed

Depressed Center Grinding Wheel

Hose Size

Mass (Weight)

Green Disc GS #80 : 1 pc. 5 mm Hex. Socket Screw Key : 1 pc. 19 mm Single Ended Spanner : 1 pc. Bushing R 1/4 × NPT 1/4 : 1 pc.

6 mm Hex. Socket Screw Key : 1 pc. Bushing R 3/8 × NPT 3/8 : 1 pc.

6 mm Hex. Socket Screw Key : 1 pc. 17 mm Single Ended Spanner : 1 pc. Bushing R 3/8 × NPT 3/8 : 1 pc.

MAG-50

0.6 {6}

0.87

12,000

125

3/8

2.2

Air Hose Sub Ass'y : 1 set Exhaust Hose Ass'y : 1 set Side Handle Ass'y : 1 set 4 mm Hex. Socket Screw Key : 1 pc. Pin Face Wrench : 1 pc. Bushing R 3/8 × NPT 3/8 : 1 pc.

MAGW-40Model

Depressed centerwheel 58 mm MLG-40

ModelDepressed centerwheel 100 mm

Depressed centerwheel 100 mm

133 mm 224.5 mm

66.5 mm 85.5 mm

219 mm

95 mm

PNEUMATIC GRINDER MYTON

MYTON

MAG-50Model

Depressed centerwheel 125 mm MLG-70

ModelDepressed centerwheel 180 mmMLG-70

ModelDepressed centerwheel 180 mm

102 mm102 mm

238 mm256 mm

Lever Type Ring Type

MLG-70 Ring TypeMLG-70 Lever Type

2.252.45

221 mm

89 mm

9

Page 11: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

MAS-20BModel

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1 (rpm)

inch

kg

MAS-20B

0.6 {6}

0.4

22,000

1" , 1 - 1/2" and 2"

1/4

0.5

Model

Rated Air Pressure

Air Consumption (No load)

Free Speed

Abrasive Disc

Hose Size

Mass (Weight)

MAS-40

0.6 {6}

0.45

13,700

100 mm

3/8

0.9

MAS-70

0.6 {6}

0.98

7,500

180 mm

3/8

1.9

14 mm Single Ended Spanner : 1 pc. Cupla 20SH : 1 pc. Bushing R 1/4 × NPT 1/4 : 1 pc. Back-up Pad 1" : 1 pc. Back-up Pad 1 - 1/2" : 1 pc. Back-up Pad 2" : 1 pc. Abrasive Paper 1" × #60, #80, #100, #120 : 2 pcs. each Abrasive Paper 1 - 1/2" × #60, #80, #100, #120 : 2 pcs. each Abrasive Paper 2" × #60, #80, #100, #120 : 2 pcs. each

6 mm Hex. Socket Screw Key : 1 pc. 17 mm Single Ended Spanner : 1 pc. Bushing R 1/4 × NPT 1/4 : 1 pc. Hose Nipple NPT 1/4 × 3/8 : 1 pc.

10 mm Hex. Socket Screw Key : 1 pc. 41 mm Single Ended Spanner : 1 pc. Hose Nipple NPT 3/8 × 3/8 : 1 pc. Bushing M16 × NPT 3/8 : 1 pc.

MAS-40Model

MAS-70Model

Abrasive disc 1",1 - 1/2" & 2"

Abrasive disc 100 mm

Abrasive disc180 mm

Optional Parts

PN Description QtyTA9B101TA9B102TA9B103TA9B104

25 pcs.25 pcs.25 pcs.25 pcs.

Paper 1" × #40Paper 1" × #60Paper 1" × #80Paper 1" × #100

PN Description QtyTA9B105TA9B106TA9B107TA9B108

25 pcs.25 pcs.25 pcs.25 pcs.

Paper 1" × #120Paper 1" × #180Paper 1" × #240Paper 1" × #320

Green Discs for MYTON MLG-25 Disc Pad for MYTON MAS-20B

1" Paper for MYTON MAS-20B

PN Description QtyTA9B109TA9B110TA9B111TA9B112

25 pcs.25 pcs.25 pcs.25 pcs.

Paper 1 - 1/2" × #40Paper 1 - 1/2" × #60Paper 1 - 1/2" × #80Paper 1 - 1/2" × #100

PN Description QtyTA9B113TA9B114TA9B115TA9B116

25 pcs.25 pcs.25 pcs.25 pcs.

Paper 1 - 1/2" × #120Paper 1 - 1/2" × #180Paper 1 - 1/2" × #240Paper 1 - 1/2" × #320

1 - 1/2" Paper for MYTON MAS-20B

PN Description QtyTA9B117TA9B118TA9B119TA9B120

25 pcs.25 pcs.25 pcs.25 pcs.

Paper 2" × #40Paper 2" × #60Paper 2" × #80Paper 2" × #100

PN Description QtyTA9B121TA9B122TA9B123TA9B124

25 pcs.25 pcs.25 pcs.25 pcs.

Paper 2" × #120Paper 2" × #180Paper 2" × #240Paper 2" × #320

2" Paper for MYTON MAS-20B

GRINDING & SANDING

PN Description QtyTB08872TB08873TB08874TB08875TB08876

5 pcs.5 pcs.

10 pcs.5 pcs.5 pcs.

GS#46 × 58 mmGS#60 × 58 mmGS#80 × 58 mm

GS#100 × 58 mmGS#120 × 58 mm

128 mm

101 mm

180 mm

82 mm

99 mm

202 mm

PN Description QtyTP18576TP18575TP18574

1 pc.1 pc.1 pc.

PAD (1") No.1PAD (1 - 1/2") No.2PAD (2") No.3

PNEUMATIC SANDER MYTON

* Green Discs cannot be used on MAG-25.

Japanese Model

10

Page 12: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

GRINDING

The perfect tool for all tasks!

L-25BModel

Specifications

Standard Accessories

Optional AccessoriesMounted Wheel for AIR SONIC L-25B (5 pcs/set) Rotary Bar for AIR SONIC L-35C (1 pc.)

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

L-25B

0.4

27,000

0.6 (without hose)

Model

Rated Air Pressure

Air Consumption (No load)

Free Speed

Size of Collet Chuck

Hose Size

Mass (Weight)

L-35C

0.35

37,500

0.45 (without hose)

14 mm Single Ended Spanner : 1 pc. Mounted Wheel No.2 : 1 pc. Mounted Wheel No.3 : 1 pc.

No.1 : 16 × 32

No.5 : 19 × 28

No.2 : 16 × 32

No.6 : 25 × 13

No.3 : 19 × 20

No.7 : 32 × 10

No.4 : 25 × 25

No.8 : 16 ballPN : TA9A277

PN : TA9A281

PN : TA9A278

PN : TA9A282

PN : TA9A279

PN : TA9A283

PN : TA9A280

No.1 : CB1C-106

PN : TP10594

PN : TA9A284

No.5 : CB5C-104

PN : TP10598

No.2 : CB2C-105

PN : TP10595

No.6 : CB6C-102

PN : TP10599

No.3 : CB3C-103

PN : TP10596

No.7 : CB7C-103

PN : TP10600

No.4 : CB4C-103

PN : TP10597

No.8 : CB8C-105

PN : TP10601

Chuck Pin : 1 pc. Bushing R 1/4 × NPT 1/4 : 1 pc.

14 mm Single Ended Spanner : 1 pc. Mounted Wheel 13 × 13 × 6 × 38 : 1 pc. Bushing R 1/4 × NPT 1/4 : 1 pc.

For all grinding, deburring and finishing jobs Special design for rotary barsL-35CModel

The high-speed mighty mite with super-efficient silencer and rear exhaust system. Wonder works on all metals, wood, and plastics, even extremely hard and exotic materials. And now that efficiency is upgraded with the addition of an air silencer and new rear exhaust system for grinding dust-it's all the more the perfect tool for toolrooms and model shops. The super efficiency of the silencermakes it possible for all craftsmen to work longer with less irritation due to noise. For precision grinding, deburring machines parts, grinding small castings, removing welding slags, shaping and finishing wood, glass and plastics. This is the compact, easy handing air tool for all tasks.

136 mm 171 mm

PNEUMATIC DIE GRINDER AIR SONIC

AIR SONIC

0.6 {6}

6

1/4

11

Page 13: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

AL-55Model

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

AL-55

0.6 {6}

0.17

56,500

3

1/4

0.25

Model

Rated Air Pressure

Air Consumption (No load)

Free Speed

Size of Collet Chuck

Hose Size

Mass (Weight)

High Speed Rotation 56,500 rpm

Standard Accessories

GRINDINGDRILLING

22 mm OD

AIR SONICPNEUMATICDIE GRINDER

Grinding Stone (Optional)

PNEUMATICHAND DRILL AIR DRILL

ADR-65Model Model

Model

Rated Air Pressure

Air Consumption (No load)

Free Speed

Max. Drilling Capacity

Mass (Weight)

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

kg

ADR-65

0.6 {6}

0.55

6.5

0.8

ADR-100

0.6 {6}

0.67

2,000

10.0

1.1

Optional Accessory

*

The power and performance you needto drill deeper and faster

175 mm

154 mm

ADR-100

168 mm

221 mm

Forward

Reverse

Reversible

Variable speed adjustment

AIR DRILL

12

Page 14: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

SANDING

Rear exhaustsystem

Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1 (rpm)

m/min

mm

inch

kg

B-10N0.6 {6}

0.417,0001,120

10 × 3301/40.7

ModelRated Air PressureAir Consumption (No load)

Motor Free SpeedBelt SpeedBelt SizeHose SizeMass (Weight)

B-20N0.6 {6}0.52

17,0002,620

20 × 5201/41.2

B-30N0.6 {6}0.68

14,0002,160

30 × 5401/42.4

Abrasive Belt Z#60 × 10 mm :2 pcs. (1 pc. on the body)Abrasive Belt Z#80 × 10 mm :1 pc.Abrasive Belt Z#100 × 10 mm :1 pc.Abrasive Belt Z#120 × 10 mm :1 pc.2 mm Hex. Wrench Key :1 pc.4 mm Hex. Wrench Key :1 pc.Bushing R 1/4 × NPT 1/4 :1 pc.Silencer :1 pc.

Abrasive Belt Z#60 × 20 mm :2 pcs. (1 pc. on the body)Abrasive Belt Z#80 × 20 mm :1 pc.Abrasive Belt Z#100 × 20 mm :1 pc.Abrasive Belt Z#120 × 20 mm :1 pc.2.5 mm Hex. Wrench Key :1 pc.4 mm Hex. Wrench Key :1 pc.Bushing R 1/4 × NPT 1/4 :1 pc.Convex Shoe :1 pc.Finger Pad Ass'y :1 pc.Pan Head Screw 5 × 10 :1 pc.Pan Head Screw 6 × 10 :1 pc.

B-20NB0.6 {6}0.52

17,0002,620

20 × 5201/41.2

Abrasive Belt Z#60 × 20 mm :2 pcs. (1 pc. on the body)Abrasive Belt Z#80 × 20 mm :1 pc.Abrasive Belt Z#100 × 20 mm :1 pc.Abrasive Belt Z#120 × 20 mm :1 pc.2.5 mm Hex. Wrench Key :1 pc.4 mm Hex. Wrench Key :1 pc.Bushing R 1/4 × NPT 1/4 :1 pc.Convex Shoe :1 pc.Finger Pad Ass'y :1 pc.Pan Head Screw 5 × 10 :1 pc.Pan Head Screw 6 × 10 :1 pc.

Abrasive Belt Z#60 × 30 mm :2 pcs. (1 pc. on the body)Abrasive Belt Z#80 × 30 mm :1 pc.Abrasive Belt Z#100 × 30 mm :1 pc.4 mm Hex. Wrench Key :1 pc.5 mm Hex. Wrench Key :1 pc.Bushing R 1/4 × NPT 1/4 :1 pc.Sub Handle Ass'y :1 setGrip Guard :1 pc.Silencer :1 pc.

Optional Parts

PN Description QtyTQ10942TB07283TB05539

1 pc.1 set1 set

Shoe 6 (for 6 mm belt)Bracket 6 Ass'y (for 6 mm belt)Offset Bracket 10 Ass'y

Optional Parts for B-10NPN Description Qty

TB07109 1 setOffset Bracket 20 Ass'y

Optional Parts for B-20N/B-20NBPN Description Qty

TB08150 1 setOffset Bracket 30 Ass'y

Optional Parts for B-30N

PN Description QtyTB00241TB00242TB00243TB00244TB00245TB00246TA9A237TA9A064TB00076TB00077TB00247TB00248TB00249TA9A244

50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.

Abrasive Belt Z#60 × 6 mmAbrasive Belt Z#80 × 6 mmAbrasive Belt Z#100 × 6 mmAbrasive Belt Z#120 × 6 mmAbrasive Belt Z#180 × 6 mmAbrasive Belt Z#240 × 6 mmAbrasive Belt AA#400 × 6 mmAbrasive Belt Z#60 × 10 mmAbrasive Belt Z#80 × 10 mmAbrasive Belt Z#100 × 10 mmAbrasive Belt Z#120 × 10 mmAbrasive Belt Z#180 × 10 mmAbrasive Belt Z#240 × 10 mmAbrasive Belt AA#400 × 10 mm

Abrasive Belt for B-10NPN Description Qty

TA99605TA99606TA99607TA99608TA99609TB00250TB00251TA9A252TA9A253TA9A254

20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.

Abrasive Belt Z#40 × 20 mmAbrasive Belt Z#60 × 20 mmAbrasive Belt Z#80 × 20 mmAbrasive Belt Z#100 × 20 mmAbrasive Belt Z#120 × 20 mmAbrasive Belt Z#180 × 20 mmAbrasive Belt Z#240 × 20 mmAbrasive Belt AA#280 × 20 mmAbrasive Belt AA#320 × 20 mmAbrasive Belt AA#400 × 20 mm

Abrasive Belt for B-20N/B-20NB Abrasive Belt for B-30NPN Description Qty

TB00252TB00253TB00254TB00255TB00256TB00257TB00258TA9A262TA9A263TA9A264

20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.

Abrasive Belt Z#40 × 30 mmAbrasive Belt Z#60 × 30 mmAbrasive Belt Z#80 × 30 mmAbrasive Belt Z#100 × 30 mmAbrasive Belt Z#120 × 30 mmAbrasive Belt Z#180 × 30 mmAbrasive Belt Z#240 × 30 mmAbrasive Belt AA#280 × 30 mmAbrasive Belt AA#320 × 30 mmAbrasive Belt AA#400 × 30 mm

PNEUMATIC BELT SANDER BELTON

BELTONB-30NModel

Belt Size30 mm (W)B-30NModelBelt Size30 mm (W)

299 mm

257 mm

B-20NModelBelt Size20 mm (W)

250 mm

243 mm

Model B-20NB Belt Size20 mm (W)

250 mm

243 mm

B-10NModel B-10NModelBelt Size10 mm (W)

152 mm

223 mm

The Idle Pulleyfor B-20N is supportedby both sides.

The Idle Pulleyfor B-20NB is supportedby one side only.

13

Page 15: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

SANDING

Optional Parts For BABY BELTON

PN Description QtyTA9A064TB00076TB00077TB00247TB00248TB00249TA9A244

50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.

Abrasive Belt Z#60 × 10 mmAbrasive Belt Z#80 × 10 mmAbrasive Belt Z#100 × 10 mmAbrasive Belt Z#120 × 10 mmAbrasive Belt Z#180 × 10 mmAbrasive Belt Z#240 × 10 mmAbrasive Belt AA#400 × 10 mm

Abrasive Belt for BB-10A

*1: #400 is Aluminium Belt.

PN Description QtyTB07114TB07115TB07116TB07117TB07118TB07119TB07120TB07125TB07126TB07127TB07128TB07121TB07122TB07123

20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.5 pcs.5 pcs.5 pcs.

Abrasive Belt Z#60Abrasive Belt Z#80Abrasive Belt Z#100Abrasive Belt Z#120Abrasive Belt Z#180Abrasive Belt Z#240Abrasive Belt Z#400*1

Abrasive Belt CE#60Abrasive Belt CE#80Abrasive Belt CE#100Abrasive Belt CE#120Finish Belt A-VF (Equivalent to #180)Finish Belt A-M (Equivalent to #320) Finish Belt S-SF (Equivalent to #400)

Abrasive Belt for BB-20

PNEUMATIC BELT SANDER BELTON

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1 (rpm)

m/min

mm

inch

kg

ModelRated Air PressureAir Consumption (No load)

Motor Free SpeedBelt SpeedBelt SizeHose SizeMass (Weight)

BB-200.6 {6}0.43

16,0001,100

20 × 3301/40.8

BB-10A0.6 {6}0.25

16,0001,000

10 × 3301/40.6

Abrasive Belt Z#100 × 10 mm:1 pc. (on the body)Abrasive Belt Z#120 × 10 mm:1 pc.Abrasive Belt Z#180 × 10 mm:1 pc.Abrasive Belt Z#240 × 10 mm:1 pc.1.5 mm Hex. Wrench Key :1 pc.Cupla HA-65SN:1 pc.

Abrasive Belt Z#60 × 20 mm:1 pc. (on the body)Abrasive Belt Z#120 × 20 mm:1 pc.Abrasive Belt Z#240 × 20 mm:1 pc.2.5 mm Hex. Wrench Key :1 pc.3 mm Hex. Wrench Key :1 pc.Cupla HA-65SN:1 pc.Shoe:1 pc. Dust Cover :1 pc.

Ideal for deburring, chamfering, bead grinding, and polishing applications

Deburring & chamfering of uneven edge and plate surfaces

Detail finishing Deburning of thin materials

Curved and unique profiles

Belt rotation direction can be changed. Lever position can be changed for right or left hand operator convenience.d operator conven

For left-handed user

For right-handed user

BABY BELTON BB-10AModelBelt Size10 mm (W)

246 mm

79 mm

BB-20ModelBelt Size20 mm (W)

249 mm

103 mm

right or left hand operator convenience right or left hand operator convenience

ReverseReverseForwardForward

14

Page 16: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

SANDING

APS-125/150

Standard Accessories Spanner 17 : 1 pc. Bushing R 1/4 × NPT 1/4 : 1 pc.

Ergonomically designed plastic housing conforms to the operator's hand for greater control and comfort

Model

Specifications

Non Vacuum

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

mm

kg

kg

APS-125

0.6 {6}

0.45

10,000

5

125

0.69

0.10

Model

Rated Air Pressure

Air Consumption (No load)

Motor Free Speed

Orbit Diameter

Paper Size

Mass (Weight)

Pad Mass (Weight)

APS-150

0.6 {6}

0.45

10,000

5

150

0.72

0.12

Applications

For Self Vacuum & Central Vacuum

Self Vacuum Central Vacuum

Random orbital action produces a high-quality swirl-free finish

145 mm

PNEUMATIC COMPACT SANDER PALM ORBITAL SANDER

PALM ORBITAL SANDER

OSV-60A

Model

Model

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

mm

kg

OSV-60A

0.6 {6}

0.68

8,500

10

150

2.0

for self stick papers

Model

Rated Air Pressure

Air Consumption (No load)

Motor Free Speed

Orbit Diameter

Paper Size

Mass (Weight)

Pad

245 mm

Compact yet extremely powerful.Built-in adjustable speed regulator

Standard Accessories

Bushing R 1/4 × NPT 1/4 : 1 pc. Spanner 17 : 1 pc. Brush : 1 pc. Dust Bag : 1 pc. Hose : 1 pc. Hose Band : 1 pc.

Random orbital action creates aprofessional finish

ORBITAL SANDER

15

Page 17: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

SANDING

Superlight, Quiet New low-vibration sander

FS-100C

Small and Lightweight for Comfort and ConvenienceFree Sander fits the hand like a glove. It's human-engineered to less tiring over longer periods of operation for big jobs, and compact enough to permit working easily in corners and other spots.

Minimized Hand VibrationThe turbine motor of FS-100C and the single-ball air motor of FS-50A are mounted directly onto the sanding pad to minimize the discomfort of hand vibration and lessen operator fatigue caused by vibration. This along with excellent control results in a finer finish on all surface materials.

Model

Round-Pad for FS-100C

FS-50AModel

The pad is made of sponge rubber and conform easily to the shape being worked.Double-side tape is used with round pad.

This newly developed motor features a turbine disc and is capable of high speed orbits for super-fine finishing of all materials.

Optional Accessories PN Description Qty

TA99828TB02240

1 pc.1 pc.

Rubber Pad Ass'yDust Collector Ass'y

PN Description QtyTA9A367TA91474TA9A265TA9A266TA9A267TA9A268TA9A269TA9A270TA9A271TB02235

1 pc.1 pc.

200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.

1 pc.

Rubber Pad Ass'yRound Pad Ass'yAbrasive paper #100Abrasive paper #120 Abrasive paper #150Abrasive paper #180 Abrasive paper #240 Abrasive paper #280 Abrasive paper #320 Dust Collector Ass'y

ModelModel

Rated Air Pressure

Air Consumption (No load)

Motor Free Speed

Orbit Diameter

Pad Size

Paper Size

Mass (Weight)

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1

mm

mm

mm

kg

FS-100C

0.6 {6}

0.2

20,000

1.5

100 × 110

114 × 140

0.5

FS-50A

0.6 {6}

0.14

15,000

1.2

75 × 82

70 × 114

0.5

Air Hose H Ass'y : 1 set Bushing R 1/4 × NPT 1/4 : 1 pc. Abrasive paper #180 : 5 pcs. Abrasive paper #240 : 5 pcs.

Air Hose H Ass'y : 1 set Bushing R 1/4 × NPT 1/4 : 1 pc. Abrasive paper #180 : 5 pcs. Abrasive paper #240 : 5 pcs.

For Free Sander FS-100C For Free Sander FS-50A

Powerful turbine motor

82 mm75 mm100 mm110 mm

FREE SANDERHANDY PNEUMATIC SANDER FREE SANDER

16

Page 18: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

SANDING

Sands to a clean finish and more in less time.Compact and light.

Light sanding with piston movementA compact, lightweight and economical unit having amazingly low air consumption. Built rugged for long continuous hours of operation.Incorporates no gears and other complicated mechanisms.

Double Piston AlignmentSpecial double-action minimizes both noise and vibration so the operator works in more comfort.

Model

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1

mm

mm

mm

kg

LS-10

0.6 {6}

0.11

4,000

4

55 × 103

57 × 140

0.75

Model

Rated Air Pressure

Air Consumption (No load)

Free Speed

Stroke

Pad Size

Abrasive Paper Size

Mass (Weight)

Hose E Ass'y : 1 set Bushing R 1/4 × NPT 1/4 : 1 pc. Block Rubber Pad Ass'y : 1 set Abrasive Paper #240 : 5 pcs. Abrasive Paper #320 : 5 pcs. Base Plate A Ass'y : 1 set

LS-10

Optional AccessoriesPN Description Qty

TB02244 1 pc.Dust Collector Ass'y

Special Sanding PadAn accessory Block Rubber Pad Ass'y can be easily trimmed to conform the shape beingworked.

103 mm

55 mm

PNEUMATIC RECIPROCATING SANDER LINE SANDER

LINE SANDER

17

Page 19: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

FILING

Super efficient way of easyfiling, polishing and finishing

SH-100A

SUPER HAND replaces work.SUPER HAND is ultra-small, ultra-lightweight; yet performs with the power and efficiency of a much larger tool to meet user requirements of filling, chamfering and other jobs.It comes with the quick-change tool points for different jobs. You can work on steel, glass, brass, aluminium, wood and other materials silently. It also handles scores of big jobs with speed and ease.

Model

Rubber Pad Ass'y for SH-100A

Supporter Ass'y for SH-100A

Optional Accessories

PN Description QtyTA9A222TA9A223

TA9A224

TA9A225TA91752TA94625TB04319

5 pcs.5 pcs.

5 pcs.

5 pcs.1 set1 set1 set

Rat Tail SF-10Triangular Taper File SF-11 Half Rounded File(Rat Tail/Double Cut) SF-12Flat Bastard File SF-13Rubber Pad Ass'y for SH-100ASupporter Ass'y for SH-100ASanding Pad Ass'y for ASH-900

Model

Rated Air Pressure

Air Consumption (No load)

Stroke Speed

Stroke

Max. Shank dia. of Points

Mass (Weight)

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1

mm

mm

kg

SH-100A

0.6 {6}

0.24

3,700

9

6.3

1.1

ASH-900

0.6 {6}

0.2

6,300

9

5.0

0.5

Flat Bastard File SF-13 : 1 pc. Rat Tail File SF-10 : 1 pc. Triangular Taper File SF-11 : 1 pc. Half Rounded File (Rat Tail/Double Cut)

SF-12 : 1 pc. 3 mm Hex. Socket Screw Key : 1 pc. Bushing R 1/4 × NPT 1/4 : 1 pc.

Flat Bastard File SF-13 : 1 pc. Rat Tail File SF-10 : 1 pc. Triangular Taper File SF-11 : 1 pc. Half Rounded File (Rat Tail/Double Cut)

SF-12 : 1 pc. 2.5 mm Hex. Socket Screw Key : 1 pc. Bushing R 1/4 × NPT 1/4 : 1 pc.

For Super Hand SH-100A & ASH-900

Flat Bastard File SF-13

Weight reduced by halffor comfortable operationover long period of time

Rat Tail File SF-10

Triangular Taper File SF-11

Half Round File (Rat Tail/Double Cut) SF-12

Sanding Pad Ass'y for ASH-900

177 mm

SUPER HANDPORTABLE PRECISION FINISHING FILE SUPER HAND

ASH-900Model

182 mm

18

Page 20: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

FILINGCUTTING

PNEUMATICHACKSAW SUPER SAWPORTABLE FINE

FINISHING FILE MICRO AIR HAND

Special double-piston system achieved lowvibration while cutting speed improved!!

Model

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1

mm

kg

SSW-110

0.6 {6}

0.29

7,000

11

0.62

Model

Rated Air Pressure

Air Consumption (No load)

Stroke Speed

Stroke

Mass (Weight)

32 mm Saw Blade : 2 pcs. 3 mm Hex. Socket Screw Key : 1 pc. Bushing R 1/4 × NPT 1/4 : 1 pc.

SSW-110

Optional Accessories

PN Description QtyTA9A005TA9A011TB00193TB00192

10 pcs.10 pcs.10 pcs.10 pcs.

32 mm Saw Blade24 mm Saw Blade18 mm Saw Blade14 mm Saw Blade

SSW-110 has many features on the followings......

Low vibration is achieved by the special design of double piston mechanismNew adoption of piston rings minimized power loss and improved cutting efficiencyOptimized blade stroke for maximum cutting performanceRear exhaust system for chip-scattering-free operationNew double-lock throttle lever prevents unintended startCutting Capacity : Max. plate thickness 3 mm (for Mild Steel)

205 mm

SUPER SAW

Select either one of the 2 modelsdepending on your applications.

2.2 mm

MAH-162.2mm

Stroke

0.5 mm

MAH-050.5mm

Stroke

Diamond files (5 pcs/set)

Flat end file (PN TB07502)

Triangular end file (PN TB07504)

Round end file (PN TB07503)

Half-round end file (PN TB07505)

2

2

ø3

ø3

ø3

2

ø3

65

ø1

0.5

1

65

4.5

1.5

65

65

2

R1 Vice Holder (PN TB07506) Grinding stone plates such as ceramic grindingstones in the market can be also mounted.(Max size: Thickness 3.2 mm × Width 20 mm)

Mounting examples

MICRO AIR HAND

× NPT 1/4 : 1 pc.Standard Accessories

176 mm

21 mm OD

Fine reciprocating motion best forprecision parts filing

Specifications

MPa {kgf/cm2}

m3/min

min-1

mm

mm

kg

MAH-05

22,000

0.5

MAH-16

11,000

2.2

Model

Rated Air Pressure

Air Consumption (No load)

Stroke Speed

Stroke

Shank diameter of file

Mass (Weight)

MAH-05/MAH-16Model

MAH-05

MAH-16

0.6 {6}

0.07

3

0.4

19

Page 21: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

XChamfer

YStraight

XChamfer

YStraight

CHAMFERING

HB-15B Chamfering up to 15C

Standard accessories

Optional accessories

Model

Standard accessories

Optional accessories

Handy Electric Chamfering Tool

MB-03A Double insulation

3C

3R

Model

HAND BEVELER

MINI BEVELER

PORTABLE CHAMFERING TOOLS HAND BEVELER

SpecificationsModel

Power Supply (Single phase)

Rated Power Consumption

Rated Current

Chamfering Capacity

Chamfering Radius Capacity

Chamfer Angle

Rated Revolutions

Mass (Weight)

MB-03A

˚

X Y

Chamfer angle and width

Mild Steel

ModelPower Source (Single phase)Rated Power ConsumptionRated CurrentNo-load SpeedChamfering CapacityChamfer AngleMass (Weight)

SpecificationsHB-15B

Chamfer angle, width and radius

X Y

Round

Radius

15CMild Steel

Chamfering I-beamsChamfering I-beamsChamfering steel platesChamfering steel plates

Compact and light for speed chamfering

20

Page 22: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

XChamfer

YStraight

XChamfer

YStraight

CHAMFERING

ModelHandy Electric Chamfering Tool

EMB-0307B

3C

7C

4R

4R

Stainless Steel

Mild Steel

316.4 mm

179 mm

189.6 mm

MINI BEVELER

Standard accessoriesIndexable Insert with Hole 12.7 : 1 pc.Indexable Insert Set Screw : 1 pc.

ECB-0203Electric Radial Chamfering Tool

Smoothly chamfering straight and curved edges (3R)(2R)

( )

*1: indexable insert for 3R is

and indexable insert

1.5C 2RStainless Steel

3C 3RMild Steel

Model

Chamfering straight edges Chamfering curved edges

136 mm

Standard accessories

Indexable Insert with Hole 12.7 : 1 pc.Indexable Insert

Specifications

that come with the tool

Model

Power Supply

Rated Power Consumption

Rated Current

Rated Duty

Chamfer Angle

Power Cord Length

Mass (Weight)

EMB-0307B

4.6

3.9

CIRCUIT BEVELER

PORTABLECHAMFERING TOOLS MINI BEVELER/CIRCUIT BEVELER

Double insulation

Double insulation

A

m

Mild Steel

Stainless Steel

SpecificationsECB-0203

1 1

1

min

min (rpm)

m

ChamferingCapacity

Mild Steel

Stainless Steel

ModelPower SupplyRated Power ConsumptionRated DutyMotor No-load Speed

Chamfer AnglePower Cord LengthMass (Weight)

Round

RadiusModel

Material Mild SteelStainlessSteel

Chamfer angle, width and radius

X7

3.8

Y7

6.6

X3

2.21

Y3

3.83.8

Mild Steel(mm)Stainless Steel(mm)

Chamfering range of operationMin. Diameter Min. Radius Min. Depth Min. Thickness

X

3

Y

3

X Y

Chamfer angle, width and radius

MildSteel(mm)

StailessSteel Round

RadiusModel

Material Mild SteelStainlessSteel

2

ChamferingCapacity

21

Page 23: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

XChamfer

YStraight

XChamfer

YStraight

Round

Radius

CB-02Pneumatic Radial Chamfering Tool

Optional accessories( )

( )

Standard accessories

Specifications

}

Lets you chamfer easily and smoothly no matter what the curve line is

2C

2R

Model

CHAMFERING

CIRCUIT BEVELER

Pneumatic Chamfering ToolLever Type Ring Type

AMB-0307AMBL-0307

Standard accessories

3C

7C

4R

4R

Stainless Steel

Mild Steel

SpecificationsAMBL-0307, AMB-0307

Mild Steel

Stainless Steel

}

NOW A SMALL AIR BEVELERDOES THE BIG JOBS, TOO

AMB-0307AMBL-0307

MINI BEVELER

PORTABLECHAMFERING TOOLS MINI BEVELER/CIRCUIT BEVELER

Model

Air Pressure

Air Consumption (No load)

Free Speed

Chamfer Angle

Mass (Weight)

Model

Air Pressure

Air Consumption (No load)

Free Speed

Chamfering Capacity

Chamfer Angle

Mass (Weight)

CB-02

Chamfering range of operationMin. Diameter Min. Radius Min. Depth

Chamfer angle, width and radius

X YX

1

Y

X YRound

Radius

Chamfer angle, width and radius

Mild Steel

Chamfering Capacity

22

Page 24: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

Optional Accessories for HAND BEVELER / MINI BEVELER / CIRCUIT BEVELER

HI CUPLA ACE

Body material SizeWorking pressurePressure resistancePacking materialWorking temp.range

SpecificationsEngineering plastics

1/4", 3/8", others1.5 MPa2.0 MPa

NBR-5˚C - 60˚C

For hose connection (PH)20PH-PLA30PH-PLA

20PM-PLA30PM-PLA

50PNG-PLA65PNG-PLA85PNG-PLA

20PFF-PLA

For 1/4" hoseFor 3/8" hose

For Rc 1/4" For Rc 3/8"

For 5 ID × 8 OD hoseFor 6.5 ID × 10 OD hoseFor 8.5 ID × 12.5 OD hose

For G 1/4"

For hose connection (SH)HA-20SHHA-30SH

HA-20SMHA-30SM

HA-50SNGHA-65SNGHA-85SNG

HA-T

For 1/4" hoseFor 3/8" hose

For Rc 1/4" For Rc 3/8"

For 5 ID × 8 OD hoseFor 6.5 ID × 10 OD hoseFor 8.5 ID × 12.5 OD hose

20P-PLA / HA-65S × 2

For female thread connection (PM) For female thread connection (SM)

For urethane hose with spring nut connection (PNG) For urethane hose with spring nut connection (SNG)

For male thread connection (PF) Hi Cupla Ace T type (for 2 branches)

Plastic Plug Hi Cupla Ace SocketP S

QUICK CONNECTIVE COUPLINGS FOR PNEUMATIC TOOLS HI CUPLA seriesHI CUPLA / HI CUPLA 200 (One-touch connection & Big flow rate type)

PlugFor hose connection17PH20PH30PH

10PM20PM30PM

20PF30PF40PF

20PFF

For 1/4" hoseFor 1/4" hoseFor 3/8" hose

For Rc 1/8" For Rc 1/4"For Rc 3/8"

For R 1/4" For R 3/8"For R 1/2"

For G 1/4"

40PH400PH600PH800PH40PM400PM600PM800PM

400PF600PF800PF

For 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hoseFor Rc 1/2" For Rc 1/2" For Rc 3/4" For Rc 1"

For R 1/2" For R 3/4" For R 1"

17SH20SH30SH

10SM20SM30SM

20SF30SF40SF

For 1/4" hoseFor 1/4" hoseFor 3/8" hose

For Rc 1/8" For Rc 1/4"For Rc 3/8"

For R 1/4" For R 3/8"For R 1/2"

40SH400SH600SH800SH40SM400SM600SM800SM

400SF600SF800SF

For 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hoseFor Rc 1/2" For Rc 1/2" For Rc 3/4" For Rc 1"

For R 1/2" For R 3/4" For R 1"

For hose connection

For female thread connection For female thread connection

For male thread connection For male thread connection

200-17SH200-20SH200-30SH

200-20SM200-30SM200-40SM

200-20SF200-30SF200-40SF

For 1/4" hoseFor 1/4" hoseFor 3/8" hose

For Rc 1/4" For Rc 3/8"For Rc 1/2"

For R 1/4" For R 3/8"For R 1/2"

200-40SH For 1/2" hoseFor hose connection

For female thread connection

For male thread connection

For male thread connection (parallel thread)

SocketP S

TypeBody material SizeWorking pressurePressure resistancePacking materialWorking temp.range

SpecificationsHi Cupla

Steel (chrome-plated)1/8", 1/4", 3/8", 1/2", 3/4", 1"

1.5 MPa2.0 MPa

NBR-20˚C - 80˚C

Hi Cupla 200 Steel (chrome-plated)

1/8", 1/4", 3/8", 1/2" 1.0 MPa1.5 MPa

NBR-5˚C - 60˚C

TA9A093

TB01159

TB01791

TB01651

TB01790

TA9A386

TA9A592

TA9A638

TA9A728

TB02539

TA9A594

TB02857

TB03097

TB02862

TB03424

TQ01683

Indexable Insert 12.7 Ass'y

Indexable Insert 12.7 with hole Ass'y

Indexable Insert 12.7 Ass'y R2

Indexable Insert 12.7 Ass'y R3

Indexable Insert 12.7 Ass'y R4

Indexable Insert 9.525 with hole Ass'y

Indexable Insert 9.525 Ass'y R2

Indexable Insert 9.525 Ass'y R3

Plate Ass'y for pipe

Attachment for small dia. pipe

Inner head Ass'y

Guide sleeve 24 mm dia. Ass'y

Plate Ass'y for straight line use

Dust Box Ass'y

Spanner T-9D

Spanner T-15D

12 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

10 pcs./set

1 set

1 set

1 set

1 set

1 set

1 set

1 pc.

1 pc.

HB-15B

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

EMB-0307B, AMB-0307, AMBL-0307

MB-03A, CB-02

MB-03A, CB-02

MB-03A

HB-15B

EMB-0307B, AMB-0307, AMBL-0307

MB-03A

ECB-0203

ECB-0203

ECB-0203

MB-03A, CB-02

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

For pipe 125 - 800 mm dia.

For pipe 80 - 200 mm dia.

For min. 100 mm dia.

For chamfering R2

Used with Plate Ass'y for straight line use

DescriptionPN Sales Unit Application model Remarks

23

Page 25: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

OTHER PRODUCT LINES MACHINE TOOLS

Electric & Hydarulic Machine Tools,Labor-saving plus improved work efficiency

A wide range of unique tools for boring and punching

ATRA ACE autoPORTABLE MAGNETIC BASE AUTOMATIC DRILLING MACHINE

Model WA-3500

HANDY SELFERELECTRICALLY OPERATED HYDRAULIC PUNCHER

Model E25-0615

JETBROACH CUTTERS &HI-BROACH CUTTERS

ANNULAR CUTTERS

JETBROACH

HI-BROACH

SELFER ACEPORTABLE DOUBLE-ACTING HYDRAULIC PUNCHER

HYDARULIC PUMPfor SELFER ACE

Puncher & Pump

Double-Acting

Puncher

SELFER HA TypePORTABLE SINGLE-ACTING HYDRAULIC PUNCHER

HYDRAULIC PUMPfor SELFER HA Type

Puncher & Pump

Single-Acting

Puncher

ATRA ACE manual feedPORTABLE MAGNETIC BASE DRILLING MACHINE

Model AO-5575

ATRA ACE manual feedPORTABLE MAGNETIC BASE DRILLING MACHINE

Model WOJ-3200

24

Page 26: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

MEDO pumps are unique products featuring a Linear-motor-driven Free Piston System.NITTO KOHKI has made available a complete series of air compressors and suction pumpsthat incorporate this revolutionary mechanism.These are quite appropriate as air sourcesor suction power units for variouspneumatically operated equipmentand apparatus in advanced industries.

Professional Tools for High Technology

DLV7300 SeriesDLV7500/8500 SeriesDLV7000/8000 SeriesDLV7100/7200/8100/8200 SeriesDLV3100/3300 SeriesDLV5720/5720H/5740/5740H/5750 SeriesDLV5800 SeriesDLV30SP/30HP-MKG (with built-in brushless motors)

Models

NITTO KOHKI "delvo" Electric Screwdrivers are high-quality tools for professional use,with special emphasis on precise control of torque and long life. They apply just thecorrect amount of torque –with sure, positive control always at your fingertips.They're smooth and shockless in operation, too. NITTO KOHKI's customer-orientedservice system is directly connected to sales agents to ensure thatyou can use "delvo" Electric Screwdrivers with confidence.

DLV5720/5720H/5740 Series

TW-00/TW-0/TW-3/TW-5/TW-9/TW-15/TW-22/TW-30/TW-40/TW-50/TW-60/TW-70

TIGON Spring Balancer ImprovesWork Safety & Efficiency

Models

Capacities ranging from 0.5 - 70 kg.

DLV30SP-MKG

DLV30HP-MKG

OTHER PRODUCT LINES"delvo" Electric Screwdrivers / Spring Balancer

Linear-motor-driven Free Piston System

25

Page 27: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

SAFETY GUIDE

Safety Precautions

Be sure to read and understand all safety precautions mentioned below and to follow the instructions given to operate eachNitto Kohki brand tool as stated in the operator’s manual. Keep operators manual close by when operating machines or toolsfor reference of safe operation and precautions.

Failure to observe the following warnings may cause a potentially hazardous situation, which if not corrected could resultin serious injury or death. To prevent the risk of fire, electric shock, and/or personal injury, proper safety guidelines shouldbe followed at all times.

Warning for ALL Machines and Tools

Notice for Air ToolsNotice for Electric Tools( 2)

( ) ()

26

Page 28: ISO 14001 ISO 9001 JQA-2042 NITTO KOHKI CO.,LTD. Machine ... · NITTO KOHKI CO.,LTD. Machine Tools Division ISO 9001 ... PNEUMATIC HACKSAW SUPER SAW ... to the surface of the workpiece

DISTRIBUTED BY

NITTO KOHKI CO.,LTD.

Head Office 9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo 146-8555 JapanPhone : +81-3-3755-1111 Fax : +81-3-3753-8791

URL : www.nitto-kohki.co.jp/e E-mail : [email protected]

Specifications and designs are subject to change at any time without notice.

Overseas Affiliates / Offices

NITTO KOHKI U.S.A., INC.TEL:+1-630-924-9393 FAX:+1-630-924-0303

NITTO KOHKI EUROPE CO., LTD.TEL:+44-1-923-239668 FAX:+44-1-923-248815

NITTO KOHKI DEUTSCHLAND GMBHTEL:+49-7-157-22436 FAX:+49-7-157-22437

NITTO KOHKI AUSTRALIA PTY LTDTEL:+61-7-3340-4600 FAX:+61-73340-4640

NITTO KOHKI (SHANGHAI) CO., LTD.TEL:+86-21-6415-3935 FAX:+86-21-6472-6957

NITTO KOHKI (SHANGHAI) CO., LTD.SHENZHEN BRANCHTEL:+86-755-8375-2185 FAX:+86-755-8375-2187

NITTO KOHKI CO., LTD.SINGAPORE BRANCHTEL:+65-6227-5360 FAX:+65-6227-0192

NITTO KOHKI CO., LTD.,BANGKOK REPRESENTATIVE OFFICETEL:+66-2-632-0307 FAX:+66-2-632-0308