ISO 1 ISO 99. ISO 1:2002 Geometrical Product Specifications (GPS) Standard reference temperature for geometrical product specification and verification ISO 2:1973 Textiles Designation of the direction of twist in yarns and related products ISO 3:1973 Preferred numbers Series of preferred numbers ISO 4:1997 Information and documentation Rules for the abbreviation of title words and titles of publications ISO 5Photography and graphic technology Density measurements ISO 5-1:2009 Geometry and functional notation ISO 5-2:2009 Geometric conditions for transmittance density ISO 5-3:2009 Spectral conditions ISO 5-4:2009 Geometric conditions for reflection density ISO 6:1993 Photography Black-and-white pictorial still camera negative film/process systems Determination of ISO speed ISO 7Pipe threads where pressure-tight joints are made on the threads ISO 7-1:1994 Dimensions, tolerances and designation ISO 7-2:2000 Verification by means of limit gauges ISO 8:1977 Documentation Presentation of periodicals ISO 9:1995 Information and documentation Transliteration ofCyrillic charactersintoLatin characters Slavic and non-Slavic languages ISO 11:1987 Aircraft Ground pressure testing connections for pressure cabins ISO 12:1987 Aerospace Pipelines Identification ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering Dimensions, tolerances and verification ISO 15:2011 Radial bearings -- Boundary dimensions, general plan ISO 16:1975 Acoustics Standard tuning frequency (Standardmusical pitch) ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers ISO 18:1981 Documentation Contents list of periodicals ISO 21:1985 Shipbuilding Inland navigation Cable-lifters for stud-link anchor chains ISO 22:1991 Belt drives Flat transmission belts and corresponding pulleys Dimensions and tolerances ISO 23:1993 Cinematography -- Camera usage of 35 mm motion-picture film -- Specifications ISO 25:1994 Cinematography -- Camera usage of 16 mm motion-picture film -- Specifications ISO 26:1993 Cinematography -- Projector usage of 16 mm motion-picture films for direct front projection -- Specifications ISO 28:1976 Cinematography -- Camera usage of 8 mm Type R motion-picture film -- Specifications ISO 29:1980 Cinematography -- Projector usage of 8 mm Type R silent motion-picture film for direct front projection -- Specifications [Withdrawn without replacement] ISO 31Quantities and units [withdrawn: replaced with ISO/IEC 80000] ISO 32:1977 Gas cylinders for medical use -- Marking for identification of content ISO 34 ISO 34-1:2010 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces ISO 34-2:2011 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces ISO 35:2004 Natural rubber latex concentrate -- Determination of mechanical stability ISO 36:2011 Rubber, vulcanized or thermoplastic -- Determination of adhesion to textile fabrics ISO 37:2011 Rubber, vulcanized or thermoplastic Determination of tensile stress-strain properties ISO 41:1980 Shipbuilding -- Inland vessels -- Covers for deck openings for pumps [withdrawn without replacement] ISO 43:1976 Aircraft -- Jacking pads ISO 44:1975 Aerospace -- Lever-operated, two-position, ON/OFF switches -- Directions of operation ISO 45:1990 Aircraft -- Pressure refuelling connections ISO 46:1973 Aircraft -- Fuel nozzle grounding plugs and sockets ISO 48:2010 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD) ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1 ISO 50:1977 Metal pipes -- Steel sockets screwed according to ISO 7 [Withdrawn without replacement] ISO 53:1998 Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering -- Modules ISO 55:1977 Seedlac -- Specification [Withdrawn without replacement] ISO 57:1975 Bleached lac -- Specification [Withdrawn without replacement] ISO 60:1977 Plastics -- Determination of apparent density of material that can be poured from a specified funnel ISO 61:1976 Plastics -- Determination of apparent density of moulding material that cannot be poured from a specified funnel ISO 62:2008 Plastics -- Determination of water absorption ISO 63:1975 Flat transmission belts -- Lengths [Withdrawn: Replaced with ISO 22] ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1 ISO 67:1981 Muscovite mica blocks, thins and films -- Grading by size [Withdrawn without replacement] ISO 68 ISO general-purpose screw threads Basic profile ISO 68-1:1998 Metric screw threads ISO 68-2:1998 Inch screw threads ISO 69:1998 Cinematography -- 16 mm motion-picture and magnetic film -- Cutting and perforating dimensions ISO 70:1981 Cinematography -- 35 mm negative photographic sound record on 35 mm motion-picture film -- Position and maximum width dimensions ISO 71:1977 Cinematography -- 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film -- Positions and dimensions ISO 74:1976 Cinematography -- Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film -- Positions and dimensions ISO 75 Plastics -- Determination of temperature of deflection under load ISO 75-1:2013 Plastics -- Determination of temperature of deflection under load -- Part 1: General test method ISO 75-2:2013 Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite ISO 75-3:2004 Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics ISO 76:2006 Rolling bearings -- Static load ratings ISO 78 Chemistry Layouts for standards ISO 78-2:1999 Chemistry -- Layouts for standards -- Part 2: Methods of chemical analysis ISO 78-3:1983 Chemistry -- Layouts for standards -- Part 3: Standard for molecular absorption spectrometry ISO 78-4:1983 Layouts for standards -- Part 4: Standard for atomic absorption spectrometric analysis ISO 82:1974 Steel -- Tensile testing [Withdrawn: replaced with ISO 6892-1] ISO 83:1976 Steel -- Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1] ISO 86:1974 Steel -- Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1] ISO 89:1974 Steel -- Tensile testing of wire [Withdrawn: replaced with ISO 6892-1] ISO 90 Light gauge metal containers -- Definitions and determination of dimensions and capacities ISO 90-1:1997 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 1: Open-top cans ISO 90-2:1997 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 2: General use containers ISO 90-3:2000 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 3: Aerosol cans ISO 91 Petroleum measurement tables ISO 91-1:1992 Petroleum measurement tables -- Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F ISO 91-2:1991 Petroleum measurement tables -- Part 2: Tables based on a reference temperature of 20 degrees C ISO 92:1976 Textile machinery and accessories -- Spinning machinery -- Definition of side (left or right) ISO 93 Textile machinery and accessories -- Cylindrical sliver cans ISO 93-1:2006 Textile machinery and accessories -- Cylindrical sliver cans -- Part 1: Main dimensions ISO 93-2:2006 Textile machinery and accessories -- Cylindrical sliver cans -- Part 2: Spring bottoms ISO 94:1982 Textile machinery and accessories -- Spindle gauges for ring-spinning and ring-doubling frames ISO 96 Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting frames ISO 96-1:2009 Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting frames -- Part 1: Flange rings T and SF and their travellers ISO 96-2:2009 Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting frames -- Part 2: HZ- and J-rings and their travellers ISO 97:1975 Textile machinery and accessories -- Rings for spinning, doubling and twisting for ear-shaped travellers ISO 98:2001 Textile machinery and accessories -- Spinning preparatory and spinning machinery -- Main dimensions of coverings for top rollersISO 100 ISO 199[edit] ISO 100:1984 Pulleys for flat transmission belts -- Crowns [Withdrawn: replaced with ISO 22] ISO 102:1990 Aircraft -- Gravity filling orifices ISO 104:2002 Rolling bearings -- Thrust bearings -- Boundary dimensions, general plan ISO 105 Textiles Tests for colour fastness ISO 105-A01:2010 Part A01: General principles of testing ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour ISO 105-A03:1993 Part A03: Grey scale for assessing staining ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques ISO 105-B01:1994 Part B01: Colour fastness to light: Daylight ISO 105-B02:2013 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test ISO 105-B05:1993 Part B05: Detection and assessment of photochromism ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7 ISO 105-B10:2011 Part B10: Artificial weathering -- Exposure to filtered xenon-arc radiation ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering -- Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent ISO 105-D02:1993 Part D02: Colour fastness to rubbing: Organic solvents ISO 105-E01:2013 Part E01: Colour fastness to water ISO 105-E02:2013 Part E02: Colour fastness to sea water ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water) ISO 105-E04:2013 Part E04: Colour fastness to perspiration ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water ISO 105-E08:1994 Part E08: Colour fastness to hot water ISO 105-E09:2010 Part E09: Colour fastness to potting ISO 105-E10:1994 Part E10: Colour fastness to decatizing ISO 105-E11:1994 Part E11: Colour fastness to steaming ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre ISO 105-G01:1993 Part G01: Colour fastness to nitrogen oxides ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere ISO 105-G04:1989 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities ISO 105-J01:1997 Part J01: General principles for measurement of surface colour ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness ISO 105-J03:2009 Part J03: Calculation of colour differences ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02) ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild) ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe) ISO 105-N05:1993 Part N05: Colour fastness to stoving ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing) ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid ISO 105-X04:1994 Part X04: Colour fastness to mercerizing ISO 105-X05:1994 Part X05: Colour fastness to organic solvents ISO 105-X06:1994 Part X06: Colour fastness to soda boiling ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool ISO 105-X08:1994 Part X08: Colour fastness to degumming ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings ISO 105-X11:1994 Part X11: Colour fastness to hot pressing ISO 105-X12:2001 Part X12: Colour fastness to rubbing ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate ISO 105-X16:2001 Part X16: Colour fastness to rubbing -- Small areas ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions ISO 108:1976 Textile machinery and accessories -- Weaving looms -- Definition of left and right sides ISO 109:1982 Textile machinery -- Working widths of weaving machines ISO 110:1978 Textile machinery and accessories -- Cones for yarn winding (cross wound) -- Half angle of the cone 9 degrees 15' [Withdrawn without replacement] ISO 111:1978 Textile machinery and accessories -- Cones for yarn winding (cross wound) -- Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3] ISO 112:1983 Textile machinery and accessories -- Cones for yarn winding (cross wound) -- Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2] ISO 113:2010 Rolling bearings -- Plummer block housings -- Boundary dimensions ISO 114:1980 99.8 Unalloyed magnesium ingots -- Chemical composition [Withdrawn: Replaced by ISO 8287] ISO 115:2003 Unalloyed aluminium ingots for remelting -- Classification and composition ISO 119:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free phenols -- Iodometric method ISO 120:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Colorimetric comparison method ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings -- Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220] ISO 123:2001 Rubber latex -- Sampling ISO 124:2011 Latex, rubber -- Determination of total solids content ISO 125:2011 Natural rubber latex concentrate -- Determination of alkalinity ISO 126:2005 Natural rubber latex concentrate -- Determination of dry rubber content ISO 127:2012 Rubber, natural latex concentrate -- Determination of KOH number ISO 128 ISO 128-1:2003 Technical drawings -- General principles of presentation -- Part 1: Introduction and index ISO 128-15:2013 Technical product documentation (TPD) -- General principles of presentation -- Part 15: Presentation of shipbuilding drawings ISO 128-20:1996 Technical drawings -- General principles of presentation -- Part 20: Basic conventions for lines ISO 128-21:1997 Technical drawings -- General principles of presentation -- Part 21: Preparation of lines by CAD systems ISO 128-22:1999 Technical drawings -- General principles of presentation -- Part 22: Basic conventions and applications for leader lines and reference lines ISO 128-23:1999 Technical drawings -- General principles of presentation -- Part 23: Lines on construction drawings ISO 128-24:1999 Technical drawings -- General principles of presentation -- Part 24: Lines on mechanical engineering drawings ISO 128-25:1999 Technical drawings -- General principles of presentation -- Part 25: Lines on shipbuilding drawings ISO 128-30:2001 Technical drawings -- General principles of presentation -- Part 30: Basic conventions for views ISO 128-34:2001 Technical drawings -- General principles of presentation -- Part 34: Views on mechanical engineering drawings ISO 128-40:2001 Technical drawings -- General principles of presentation -- Part 40: Basic conventions for cuts and sections ISO 128-44:2001 Technical drawings -- General principles of presentation -- Part 44: Sections on mechanical engineering drawings ISO 128-50:2001 Technical drawings -- General principles of presentation -- Part 50: Basic conventions for representing areas on cuts and sections ISO/TS 128-71:2010 Technical product documentation (TPD) -- General principles of presentation -- Part 71: Simplified representation for mechanical engineering drawings ISO 129 ISO 129-1:2004 Technical drawings -- Indication of dimensions and tolerances -- Part 1: General principles ISO 129-4:2013 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings ISO 131:1979 Acoustics -- Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement] ISO 132:2011 Rubber, vulcanized or thermoplastic -- Determination of flex cracking and crack growth (De Mattia) ISO 133:1983 Rubber, vulcanized -- Determination of crack growth (De Mattia) [Withdrawn: Replaced with ISO 132] ISO 136:1972 Steel -- Simple torsion testing of wire [Withdrawn replaced by ISO 7800] ISO 137:1975 Wool -- Determination of fibre diameter -- Projection microscope method ISO 139:2005 Textiles -- Standard atmospheres for conditioning and testing ISO 140 Acoustics -- Measurement of sound insulation in buildings and of building elements ISO 140-2:1991 Part 2: Determination, verification and application of precision data ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of faade elements and faades ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors ISO 140-14:2004 Part 14: Guidelines for special situations in the field ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements ISO 141:1976 Textile machinery and accessories -- Pirn winders and cross winders -- Definition of left and right sides ISO 142:1976 Textile machinery and accessories -- Weaving preparatory machines -- Definition of left and right sides ISO 143:1977 Textile machinery and accessories -- Weft pirns for automatic looms [Withdrawn without replacement] ISO 144:1973 Steel -- Reverse bend testing of wire [Withdrawn: replaced with ISO 7801] ISO 146:1984 Metallic materials -- Hardness test -- Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2] ISO 146-2:1993 Metallic materials -- Verification of Vickers hardness testing machines -- Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2] ISO 148 Metallic materials -- Charpy pendulum impact test ISO 148-1:2009 Part 1: Test method ISO 148-2:2008 Part 2: Verification of testing machines ISO 148-3:2008 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes -- Specifications and methods of test ISO 155:1998 Belt drives -- Pulleys -- Limiting values for adjustment of centres ISO 156:1982 Metallic materials -- Hardness test -- Verification of Brinell hardness testing machines [Withdrawn replaced by ISO 6506-2] ISO 157:1996 Coal -- Determination of forms of sulfur ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement] ISO 161 Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures ISO 161-1:1996 Part 1: Metric series ISO 161-2:1996 Part 2: Inch-based series ISO 162:1985 Cinematography -- Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture -- Positions and width dimensions ISO 171:1980 Plastics -- Determination of bulk factor of moulding materials ISO 172:1978 Plastics -- Phenol-formaldehyde mouldings -- Detection of free ammonia ISO 174:1974 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-2]ISO 200 ISO 999[edit] ISO 216:2007 Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction ISO 226:2003 Acoustics Normalequal-loudness-level contours ISO 228Pipe threads where pressure-tight joints are not made on the threads ISO 228-1:2000 Dimensions, tolerances and designation ISO 228-2:1987 Verification by means of limit gauges ISO 233Information and documentation Transliteration of Arabic characters intoLatin characters[Note 3] ISO 233-2:1993 Arabic language Simplified transliteration ISO 233-3:1999 Persian language Simplified transliteration ISO 259Information and documentation Transliteration of Hebrew characters intoLatin characters[Note 3] ISO 259-2:1994 Simplified transliteration ISO 261ISO general purpose metric screw threads General plan ISO 262ISO general purpose metric screw threads Selected sizes for screws, bolts and nuts ISO 361Basic ionizing radiation symbol ISO 500Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 ISO 518:2006 Photography Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units Specification ISO 519:1992 Photography Hand-held cameras Flash-connector dimensions ISO 639Codes for the representation of names of languages ISO 639-1Alpha-2 code ISO 639-2Alpha-3 code ISO 639-3Alpha-3 code for comprehensive coverage of languages ISO 639-4 General principles of coding of the representation of names of languages and related entities, and application guidelines ISO 639-5Alpha-3 code for language families and groups ISO 639-6Alpha-4 code for comprehensive coverage of language variants ISO/IEC 646Information technology ISO 7-bit coded character set for information interchange ISO 657Hot-rolled steel sections ISO 668Series 1freight containers Classification, dimensions and ratings ISO 690Information and documentation Guidelines for bibliographic references and citations to information resources ISO 704Terminology work Principles and methods ISO 732Photography 120-size and 220-size films Dimensions ISO 764 Horology Magnetic resistant watches ISO 760:1978 Determination of water - Karl Fischer method (General method) ISO 787 General methods of test for pigments and extenders ISO 787-9:1981 Determination of pH value of an aqueous suspension ISO 838Paper Holes for general filing purposes Specifications ISO 843:1997 Information and documentation Conversion of Greek characters intoLatin characters ISO 860Terminology work Harmonization of concepts and terms ISO 898Mechanical properties of fasteners made of carbon steel and alloy steel[Note 3] ISO 898-1 Bolts, screws and studs with specified property classes Coarse thread and fine pitch thread ISO 898-2 Nuts with specified proof load values Coarse thread ISO 898-5 Set screws and similar threaded fasteners not under tensile stresses ISO 898-6 Nuts with specified proof load values Fine pitch thread ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm ISO 965ISO general purpose metric screw threads Tolerances ISO 965-1 Principles and basic data ISO 965-2 Limits of sizes for general purpose external and internal screw threads Medium quality ISO 965-3 Deviations for constructional screw threads ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing ISO 999Information and documentation Guidelines for the content, organization, and presentation of indexesISO 1000 ISO 4999[edit] ISO 1000SIunits and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17] ISO 1004 Information processing Magnetic ink character recognition Print specifications ISO 1007 Photography 135-size filmand magazine Specifications ISO 1101Geometrical Product Specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out ISO 1222 Photography Tripodconnections ISO 1268 Fibre-reinforced plastics Methods of producing test plates ISO/IEC 1539 Information technology Programming languages Fortran ISO 1629Rubber and latices Nomenclature ISO 1663 Rigid cellular plastics Determination of water vapour transmission properties ISO 1745Information processing Basic mode control procedures for data communication systems ISO 1750Pesticides and other agrochemicals Common names ISO 1928 Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value ISO/IEC 2022Information technology Character code structure and extension techniques ISO 2108 Information and documentation International standard book number(ISBN) ISO 2145Documentation Numbering of divisions and subdivisions in written documents ISO 2162Technical product documentation Springs ISO 2162-1 Simplified representation ISO 2162-2 Presentation of data for cylindrical helical compression springs ISO 2171Cereals, pulses and by-products Determination of ash yield by incineration ISO 2240:2003 Photography Colour reversal camera films Determination of ISO speed ISO 2533Standard Atmosphere ISO 2709Information and documentation Format for information exchange ISO 2768 General tolerances ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance indications ISO 2768-2 Geometrical tolerances for features without individual tolerance indications ISO 2852Stainless steel clamp pipe couplings for the food industry ISO 3002Basic quantities in cutting and grinding ISO 3082Iron ores Sampling and sample preparation procedures ISO 3098Technical product documentation Lettering ISO 3103Tea Preparation of liquor for use in sensory tests ISO 3166Codes for the representation of names of countries and their subdivisions ISO 3166-1Country codes ISO 3166-2Country subdivision code ISO 3166-3Code for formerly used names of countries ISO 3297 Information and documentation International standard serial number(ISSN) ISO 3394Dimensions of rigid rectangular packages Transport packages ISO 3506Mechanical properties of corrosion-resistantstainless steelfasteners ISO 3536Road vehicles Safety glazing materials Vocabulary ISO 3537Road vehicles Safety glazing materials Mechanical tests ISO 3538Road vehicles Safety glazing materials Test methods for optical properties ISO 3601Fluid power systems O-rings ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes ISO 3601-2 Housing dimensions for general applications ISO 3601-3 Quality acceptance criteria ISO 3601-4 Anti-extrusion rings (back-up rings) ISO 3601-5 Suitability of elastomeric materials for industrial applications ISO 3602Documentation Romanization of Japanese (kanascript) ISO 3632Spices Saffron(Crocus sativus L.)[Note 3] ISO 3635:1981 Size designation of clothes Definitions and body measurement procedure ISO 3676Packaging Unit load sizes Dimensions ISO 3864Graphical symbols Safety colours and safety signs ISO 3901Information and documentation International Standard Recording Code (ISRC) ISO 3977Gas turbines Procurement ISO 4074Naturallatexrubbercondoms Requirements and test methods ISO 4157Construction drawings Designation systems ISO 4157-1 Buildings and part of buildings ISO 4157-2 Room names and numbers ISO 4157-3 Room identifiers ISO 4165Road vehicles Electrical connections Double-pole connection ISO 4179Ductile iron pipes and fittings for pressure and non-pressure pipelines Cement mortar lining ISO 4217Codes for the representation ofcurrenciesand funds ISO 4314 Surface active agents Determination of free alkalinity or free acidity Titrimetric method ISO 4578 Adhesives Determination of peel resistance of high-strength adhesive bonds Floating-roller method ISO 4582 Plastics Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources ISO 4587 Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies ISO 4628Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance ISO 4628-1 General introduction and designation system ISO 4628-2 Assessment of degree of blistering ISO 4628-3 Assessment of degree of rusting ISO 4628-4 Assessment of degree of cracking ISO 4628-5 Assessment of degree of flaking ISO 4628-6 Assessment of degree of chalking by tape method ISO 4628-7 Assessment of degree of chalking by velvet method ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe ISO 4628-10 Assessment of degree of filiform corrosion ISO/IEC 4873:1991 Information technology ISO 8-bit code for information interchange Structure and rules for implementation ISO 4892Plastics Methods of exposure to laboratory light sourcesISO 5000 ISO 9999[edit] ISO 5127Information and documentation Vocabulary ISO 5167Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full ISO 5167-1 General principles and requirements ISO 5167-2 Orifice plates ISO 5167-3 Nozzles and Venturi nozzles ISO 5167-4 Venturi tubes ISO/IEC 5218Information technology Codes for the representation of human sexes ISO 5455Technical drawings Scales ISO 5457Technical product documentation Sizes and layout of drawing sheets ISO 5660 Reaction-to-fire tests Heat release, smoke production and mass loss rate ISO 5660-1 Heat release rate (cone calorimeter method) ISO 5660-2 Smoke production rate (dynamic measurement) ISO/TS 5660-3 Guidance on measurement ISO 5725Accuracy (trueness and precision) of measurement methods and results ISO 5775Bicycle tires and rims ISO 5776Graphic technology - Symbols for text correction ISO 5800:2001 Photography Colour negative films for still photography Determination of ISO speed ISO 5893 Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification ISO 5964Documentation Guidelines for the establishment and development of multilingual thesauri ISO 5971:1981 Size designation of clothes Pantyhose ISO 5993 Sodium hydroxide for industrial use -- Determination of mercury content -- Flameless atomic absorption spectrometric method ISO 6107-4:1993 Water quality -- Vocabulary ISO 6166Securities and related financial instruments International securities identification numbering system (ISIN) ISO 6194Rotary-shaftlip-type sealsincorporating elastomeric sealing elements ISO 6194-5 Identification of visual imperfections ISO 6336Calculation of load capacity of spur and helical gears ISO 6344Coated abrasives Grain size analysis ISO 6344-1 Grain size distribution test ISO 6344-2 Determination of grain size distribution of macrogrits P12 to P220 ISO 6344-3 Determination of grain size distribution of microgrits P240 to P2500 ISO/IEC 6429Information technology Control functions for coded character sets ISO 6438Documentation African coded character set for bibliographic information interchange ISO/IEC 6523Information technology Structure for the identification of organizations and organization parts ISO 6579Microbiology of food and animal feeding stuffs Horizontal method for the detection of Salmonella spp. ISO 6594Cast iron drainage pipes andfittings Spigot series ISO 6709Standard representation of geographic point location by coordinates ISO 6946Building components and building elements Thermal resistance andthermal transmittance Calculation method ISO 7001Graphical symbols Public information symbols ISO 7002Agricultural food products Layout for a standard method of sampling from a lot ISO 7098Information and documentation Romanization of Chinese ISO 7200Technical product documentation Data fields in title blocks and document headers ISO 7240Fire detection and alarm systems ISO 7372Trade data interchange ISO/IEC 7498 Information technology --Open Systems Interconnection-- Basic Reference Model[Note 3] ISO/IEC 7498-1 The Basic Model ISO 7498-2 Security Architecture ISO/IEC 7498-3 Naming and addressing ISO/IEC 7498-4 Management framework ISO/IEC 7501Identification cards Machine readable travel documents ISO/IEC 7501-1:2008Machine readable passport ISO/IEC 7501-2:1997Machine readable visa ISO/IEC 7501-3:2005Machine readable official travel documents ISO 7736Road vehicles Car radio for front installation Installation space including connections ISO/IEC 7810Identification cards Physical characteristics ISO/IEC 7811Identification cards Recording technique ISO/IEC 7812Identification cards Identification of issuers ISO/IEC 7813Information technology Identification cards Financial transaction cards ISO/IEC 7816Identification cards Integrated circuit cards[Note 3] ISO/IEC 7942 Information technology Computer graphics and image processing Graphical Kernel System(GKS) ISO 8000Data quality ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules ISO 8090Cycles Terminology ISO 8180Ductile iron pipelines Polyethylene sleeving for site application ISO 8373Manipulating industrial robots Vocabulary ISO 8501Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness ISO 8559:1989 Garment construction and anthropometric surveys Body dimensions ISO 8573 Compressed air ISO 8573-1 Contaminants and purity classes ISO 8573-2 Test methods for oil aerosol content ISO 8573-3 Test methods for measurement of humidity ISO 8573-4 Test methods for solid particle content ISO 8573-5 Test methods for oil vapour and organic solvent content ISO 8573-6 Test methods for gaseous contaminant content ISO 8573-7 Test method for viable microbiological contaminant content ISO 8573-8 Test methods for solid particle content by mass concentration ISO 8573-9 Test methods for liquid water content ISO 8583Financial transaction card originated messages Interchange message specifications ISO 8583-1 Messages, data elements and code values ISO 8583-2 Application and registration procedures for Institution Identification Codes (IIC) ISO 8583-3 Maintenance procedures for messages, data elements and code values ISO 8601Data elements and interchange formats Information interchange Representation of dates and times ISO/IEC 8613Information technology Open Document Architecture(ODA) and interchange format ISO/IEC 8632 Information technology Computer graphics Metafilefor the storage and transfer of picture description information ISO/IEC 8632-1 Functional specification ISO/IEC 8632-2 Character encoding ISO/IEC 8632-3 Binary encoding [withdrawn 2001-06-21] ISO/IEC 8632-4 Clear text encoding ISO 8651 Information technology Computer graphics Graphical Kernel System(GKS) language bindings[Note 3] ISO/IEC 8652Information technology Programming languages Ada ISO 8653:1986JewelleryRing-sizes Definition, measurement and designation ISO 8691Petroleum products Low levels of vanadium in liquid fuels Determination by flameless atomic absorption spectrometry after ashing ISO 8805 Information processing systems Computer graphics Graphical Kernel Systemfor Three Dimensions (GKS-3D) functional description ISO/IEEC 8806 Information technology Computer graphics Graphical Kernel Systemfor Three Dimensions (GKS-3D) language bindings ISO/IEEC 8806-4 C ISO 8807 Information processing systems Open Systems Interconnection LOTOS A formal description technique based on the temporal ordering of observational behaviour ISO/IEC 8824Information technology Abstract Syntax Notation One(ASN.1) ISO/IEC 8825Information technology ASN.1 encoding rules ISO/IEC 8859Information technology 8-bit single-byte coded graphic character sets ISO/IEC 8859-1Latin alphabet No. 1 ISO/IEC 8859-2Latin alphabet No. 2 ISO/IEC 8859-3Latin alphabet No. 3 ISO/IEC 8859-4Latin alphabet No. 4 ISO/IEC 8859-5Latin/Cyrillic alphabet ISO/IEC 8859-6Latin/Arabic alphabet ISO/IEC 8859-7Latin/Greek alphabet ISO/IEC 8859-8Latin/Hebrew alphabet ISO/IEC 8859-9Latin alphabet No. 5 ISO/IEC 8859-10Latin alphabet No. 6 ISO/IEC 8859-11Latin/Thai alphabet ISO/IEC 8859-13Latin alphabet No. 7 ISO/IEC 8859-14Latin alphabet No. 8 (Celtic) ISO/IEC 8859-15Latin alphabet No. 9 ISO/IEC 8859-16Latin alphabet No. 10 ISO 8879 Information processing Text and office systems Standard Generalized Markup Language(SGML) ISO 9000Quality management systems Fundamentals and vocabulary ISO 9001Quality management systems Requirements ISO 9004 Managing for the sustained success of an organization A quality management approach ISO 9050 Glass in building Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors ISO 9069Information processing SGMLsupport facilities SGML Document Interchange Format (SDIF) ISO/IEC 9075Information technology Database languages SQL ISO/IEC 9126Software engineering Product quality ISO 9141Road vehicles Diagnostic systems[Note 3] ISO 9141-2CARBrequirements for interchange of digital information ISO 9141-3 Verification of the communication between vehicle andOBDII scan tool ISO 9241Ergonomics of human-system interaction ISO/IEC 9293Information technology Volume and file structure of disk cartridges for information interchange ISO 9362Banking Banking telecommunication messages Business identifier code (BIC) ISO 9407Shoe sizes Mondopoint system of sizing and marking ISO/IEC 9541Information technology Font information interchange ISO/IEC 9541-1:1991 Architecture ISO/IEC 9541-2:1991 Interchange Format ISO/IEC 9541-3:1994 Glyph shape representation ISO/IEC 9541-4:2009 Harmonization to Open Font Format ISO 9564Financial services Personal Identification Number (PIN) management and security[Note 3] ISO/IEC 9579Information technology Remote database access forSQLwith security enhancement ISO/IEC 9592 Information technology Computer graphics and image processing Programmer's Hierarchical Interactive Graphics System (PHIGS) ISO/IEC 9593Information technology Computer graphics Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings[Note 3] ISO/IEC 9594Information technology Open Systems Interconnection The Directory ISO/IEC 9636Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Functional specification ISO/IEC 9636-1 Overview, profiles, and conformance ISO/IEC 9636-2 Control ISO/IEC 9636-3 Output ISO/IEC 9636-4 Segments ISO/IEC 9636-5 Input and echoing ISO/IEC 9636-6 Raster ISO 9660Information processing Volume and file structure ofCD-ROMfor information interchange ISO 9712 Non-destructive testing - Qualification and certification of NDT personnel ISO/IEC 9796Information technology Security techniques Digital signature schemes giving message recovery ISO/IEC 9797 Information technology Security techniques Message Authentication Codes(MACs) ISO/IEC 9797-1Mechanisms using a block cipher ISO/IEC 9797-2Mechanisms using a dedicated hash-function ISO/IEC 9798Information technology Security techniques Entity authentication ISO/IEC 9834Information technology Open Systems Interconnection Procedures for the operation of OSI Registration Authorities ISO 9869Thermal insulation Building elements In-situ measurements of thermal resistance andthermal transmittance ISO/IEC 9899Programming languages C ISO/IEC/IEEE 9945Information technology Portable Operating System Interface (POSIX) Base Specifications, Issue 7 ISO 9984Information and documentation Transliteration of Georgian characters intoLatin characters ISO 9985Information and documentation Transliteration of Armenian characters into Latin characters ISO 9992Financial transaction cards Messages between the integrated circuit card and the card accepting device ISO/IEC 9995Information technology Keyboard layouts for text and office systems ISO 9999Assistive products for persons with disability Classification and terminologyISO 10000 ISO 14999[edit] ISO 10003:2007 Quality management Customer satisfaction Guidelines for dispute resolution external to organizations ISO 10005:2005 Quality management systems Guidelines for quality plans ISO 10006Quality management systems Guidelines for quality management in projects ISO 10007Quality management systems Guidelines forconfiguration management ISO 10012Measurement management systems Requirements for measurement processes and measuring equipment ISO/IEC 10021Information technology Message Handling Systems (MHS) ISO/IEC 10026Information technology Open Systems Interconnection ISO 10077Thermal performance of windows, doors and shutters Calculation ofthermal transmittance ISO/IEC 10089Information technology 130mm rewritable optical disk cartridge for information interchange ISO/IEC 10116Information technology Security techniques Modes of operation for ann-bit block cipher ISO/IEC 10118 Information technology Security techniques Hash-functions ISO 10160Information and documentation Open Systems Interconnection Interlibrary LoanApplication Service Definition ISO 10161Information and documentation Open Systems Interconnection Interlibrary Loan Application Protocol Specification ISO/IEC 10164Information technology Open Systems Interconnection Systems Management ISO/IEC 10179:1996 Information technology Processing languages Document Style Semantics and Specification Language(DSSSL) ISO/IEC 10206Information technology Progamming languages ExtendedPascal ISO 10211Thermal bridgesin building construction Heat flows and surface temperatures Detailed calculations ISO 10218Robots and robotic devices Safety requirements for industrial robots ISO/IEC 10279Information technology Programming languages FullBASIC ISO 10303Industrial automation systems and integration Product data representation and exchange ISO 10380Pipework Corrugated metal hoses and hose assemblies ISO 10383Securities and related financial instruments Codes for exchanges and market identification (MIC) ISO 10487Passenger cars Connections for car radios[Note 3] ISO 10555 Sterile, single-use intravascular catheters ISO 10628Flow diagrams for process plants ISO/IEC 10646 Information technology Universal Coded Character Set(UCS) ISO 10664 Hexalobular internal driving feature for bolts and screws Torxscrew head ISO/IEC 10746-1 Information technology - Open Distributed Processing - Reference model: Overview ISO/IEC 10746-2 Information technology - Open distributed processing - Reference model: Foundations ISO/IEC 10746-3 Information technology - Open distributed processing - Reference model: Architecture ISO/IEC 10746-4 Information technology - Open Distributed Processing - Reference Model: Architectural semantics ISO 10957 Information and documentation International standard music number(ISMN) ISO 10962Securities and related financial instruments Classification of Financial Instruments (CFI code) ISO 10993Biological evaluation of medical devices ISO 10993-1Evaluation and testing within a risk management process ISO 10993-2Animal welfare requirements ISO 10993-3Tests for genotoxicity, carcinogenicity and reproductive toxicity ISO 10993-4Selection of tests for interactions with blood ISO 10993-5Tests for in vitro cytotoxicity ISO 10993-6Tests for local effects after implantation ISO 10993-7Ethylene oxide sterilization residuals ISO 10993-9Framework for identification and quantification of potential degradation products ISO 10993-10Tests for irritation and skin sensitization ISO 10993-11Tests for systemic toxicity ISO 10993-12Sample preparation and reference materials ISO 10993-13Identification and quantification of degradation products from polymeric medical devices ISO 10993-14Identification and quantification of degradation products from ceramics ISO 10993-15Identification and quantification of degradation products from metals and alloys ISO 10993-16Toxicokinetic study design for degradation products and leachables ISO 10993-17Establishment of allowable limits for leachable substances ISO 10993-18Chemical characterization of materials ISO 10993-19Physico-chemical, morphological and topographical characterization of materials ISO 10993-20Principles and methods for immunotoxicology testing of medical devices ISO 11064Ergonomic design of control centres ISO 11064-1:2000 Principles for the design of control centres ISO 11064-2:2000 Principles for the arrangement of control suites ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002 ISO 11064-4:2004 Layout and dimensions of workstations ISO 11064-5:2008 Displays and controls ISO 11064-6:2005 Environmental requirements for control centres ISO 11064-7:2006 Principles for the evaluation of control centres ISO 11137Sterilization of health care products Radiation ISO 11170:2003 Hydraulic fluid power Filter elements Sequence of tests for verifying performance characteristics ISO 11171:2010 Hydraulic fluid power Calibration of automatic particle counters for liquids ISO/IEC 11172Information technology Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s ISO/IEC 11179Information technology Metadata registries (MDR) ISO/IEC 11179-1:2004 Framework ISO/IEC 11179-2:2005 Classification ISO/IEC 11179-3:2003 Registry metamodel and basic attributes ISO/IEC 11179-4:2004 Formulation of data definitions ISO/IEC 11179-5:2005 Naming and identification principles ISO/IEC 11179-6:2005 Registration ISO 11357 Plastics Differential scanning calorimetry (DSC) ISO 11357-1:2009 General principles ISO 11357-2:2013 Determination of glass transition temperature and glass transition step height ISO 11357-3:2011 Determination of temperature and enthalpy of melting and crystallization ISO 11357-4:2005 Determination of specific heat capacity ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) ISO 11357-7:2002 Determination of crystallization kinetics ISO/IEC 11404Information technology General-Purpose Datatypes (GPD) ISO 11446:2004 Road vehicles Connectors for the electrical connection of towing and towed vehicles 13-pole connectors for vehicles with 12 V nominal supply voltage ISO 11469:2000 Plastics Generic identification and marking of plastics products ISO/IEC 11578:1996Information technologyOpen Systems InterconnectionRemote procedure call(RPC) ISO 11783Tractors and machinery for agriculture and forestry Serial control and communications data network ISO/IEC 11801Information technology Generic cabling for customer premises ISO 11898Road vehicles Controller area network (CAN) ISO 12006Building construction Organization of information about construction works ISO/IEC 12207Systems and software engineering Software life cycle processes ISO 12100Safety of machinery General principles for design Risk assessment and risk reduction ISO 12639Graphic technology Prepress digital data exchange Tag image file format for image technology (TIFF/IT) ISO 12641Graphic technology Prepress digital data exchange Colour targets for input scanner calibration ISO/TS 12805:2011Nanotechnologies Materials specifications Guidance on specifying nano-objects ISO 12859/TR Intelligent transport systems System architecture Privacy aspects in ITS standards and systems ISO 12944 Paints and varnishes Corrosion protection of steel structures by protective paint systems ISO 13007 Ceramic tiles Grouts and adhesives ISO 13007-1:2010 Terms, definitions and specifications for adhesives ISO 13007-2:2010 Test methods for adhesives ISO 13007-3:2010 Terms, definitions and specifications for grouts ISO 13007-4:2010 Test methods for grouts ISO/TR 13121:2011 Nanotechnologies Nanomaterial risk evaluation ISO 13239Information technology Telecommunications and information exchange between systems High-level data link control (HDLC) procedures ISO/IEC 13249Information technology Database languages SQLmultimedia and application ISO/IEC 13250 Information technology Topic Maps[Note 3] ISO/IEC 13346Information technology Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange ISO 13370Thermal performance of buildings Heat transfer via the ground Calculation methods ISO 13406-2:2001 Ergonomic requirements for work with visual displays based on flat panels Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14] ISO 13450 Photography 110-size cartridge, film and backing paper Dimensions ISO 13485:2003 Medical devices Quality management systems Requirements for regulatory purposes ISO/IEC 13490Information technology Volume and file structure of read-only and write-once compact disk media for information interchange ISO 13567Technical product documentation Organization and naming of layers forCAD ISO/IEC 13568:2002 Information Technology Z formal specification notation Syntax, type system and semantics ISO 13577 Industrial furnaces and associated processing equipment - Safety ISO 13577-1 General requirements ISO 13579 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency ISO 13579-1 General methodology ISO 13579-2 Reheating furnaces for steel ISO 13579-3 Batch-type aluminium melting furnaces ISO 13579-4 Furnaces with protective or reactive atmosphere ISO 13586:2000 Plastics - Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach ISO 13616Financial services International bank account number (IBAN) ISO 13628Petroleum and natural gas industries Design and operation of subsea production systems ISO 13628-1General requirements and recommendations ISO 13628-2Unbonded flexible pipe systems for subsea and marine applications ISO 13628-3Through flowline (TFL) systems ISO 13628-4Subsea wellhead and tree equipment ISO 13628-5Subsea umbilicals ISO 13628-6Subsea production control systems ISO 13628-7Completion/workover riser systems ISO 13628-8Remotely Operated Vehicle (ROV) interfaces on subsea production systems ISO 13628-9Remotely Operated Tool (ROT) intervention systems ISO 13628-10Specification for bonded flexible pipe ISO 13628-11Flexible pipe systems for subsea and marine applications ISO 13715Technical drawingsEdges of undefined shapeVocabulary and indications ISO 13849Safety of machinery Safety related parts of control systems ISO/IEC 13818Information technology Generic coding of moving pictures and associated audio information ISO 13837Road vehicles Safety glazing materials Method for the determination of solar transmittance ISO 14000Environmental management systems [This is a set of standards, rather than a single standard.] ISO 14001Environmental management systems Requirements with guidance for use ISO 14004:2004 Environmental management systems General guidelines on principles, systems and support techniques ISO 14031Environmental management - Environmental performance evaluation Guidelines ISO 14050Environmental management Vocabulary ISO 14051Environmental management Material flow cost accounting - General framework ISO 14064Greenhouse gases ISO 14155:2011 Clinical investigation of medical devices for human subjects Good clinical practice ISO 14223Radiofrequency [sic] identification of animals Advanced transponders ISO 14224Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment ISO 14230 Road vehicles Diagnostic systems Keyword Protocol 2000 ISO 14230-1 Physical layer ISO 14230-2 Data link layer ISO 14230-3 Application layer ISO 14230-4 Requirements for emission-related systems ISO/IEC 14443Identification cards Contactless integrated circuit cards Proximity cards ISO/IEC 14462 - Open-EDI Reference Model ISO/IEC 14496Information technology Coding of audio-visual objects ISO 14641 Electronic archiving ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation ISO 14644Cleanrooms and associated controlled environments ISO 14644-1:1999 Classification of air cleanliness ISO 14644-2:2000 Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 ISO 14644-3:2005 Test methods ISO 14644-4:2001 Design, construction and start-up ISO 14644-5:2004 Operations ISO 14644-6:2007 Vocabulary ISO 14644-7:2004 Separative devices (clean air hoods, gloveboxes, isolators and mini-environments) ISO 14644-8:2006 Classification of airborne molecular contamination ISO/IEC 14651Information technology International string ordering and comparison Method for comparing character strings and description of the common template tailorable ordering ISO 14698Cleanrooms and associated controlled environments Biocontamination control ISO 14698-1 General principles and methods ISO 14698-2 Evaluation and interpretation of biocontamination data ISO/IEC 14750Information technology Open Distributed Processing Interface Definition Language ISO/IEC 14755Information technology Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device ISO 14801 Dentistry Implants Dynamic fatigue test for endosseous dental implants ISO 14855-1 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions Method by analysis of evolved carbon dioxide ISO 14855-1:2005 General method ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test ISO/IEC 14882 Programming Languages C++ ISO 14915Software ergonomics for multimedia user interfaces ISO 14915-1:2002 Design principles and framework ISO 14915-2:2003 Multimedia navigation and control ISO 14915-3:2002 Media selection and combination ISO 14971:2007 Medical devices Application of risk management to medical devices ISO/IEC 14977Information technology Syntactic metalanguage Extended BNFISO 15000 ISO 19999[edit] ISO/TS 15000Electronic business eXtensible Markup LanguageebXML ISO/TS 15000-1:2004 Collaboration-protocol profile and agreement specification (ebCPP) ISO/TS 15000-2:2004 Message service specification (ebMS) ISO/TS 15000-3:2004 Registry information model specification (ebRIM) ISO/TS 15000-4:2004 Registry services specification (ebRS) ISO/TS 15000-5:2005 ebXML. Core Components Technical Specification, Version 2.01(ebCCTS) ISO 15022Securities Scheme for messages (Data Field Dictionary) ISO 15082Road vehicles Tests for rigid plasticsafety glazing materials ISO 15099Thermal performance of windows, doors and shading devices Detailed calculations ISO 15112Natural gas Energy determination ISO 15189Medical laboratories Particular requirements for quality and competence ISO 15223Medical devices Symbols to be used with medical device labels, labelling, and information to be supplied ISO/IEC 15288Systems and software engineering System life cycle processes ISO/IEC 15289Systems and software engineering Content of systems and software life cycle process information products (Documentation) ISO/IEC 15291 Information technology Programming languages Ada Semantic Interface Specification(ASIS) ISO 15403Natural gas Natural gas for use as a compressed fuel for vehicles ISO 15403-1Designation of the quality ISO/IEC 15408Information technology Security techniques Evaluation criteria for IT security ISO/IEC 15414 - Open data processing - Reference Model - Enterprise Language ISO/IEC 15434Information technology Automatic identification and data capture techniques Syntax for high-capacity ADC media ISO/IEC 15444 Information technology JPEG 2000image coding system ISO/IEC 15445:2000 Information technology Document description and processing languages HyperText Markup Language (HTML) ISO 15489-1:2001 Information and documentation Records management Part 1: General ISO/TR 15489-2:2001 Information and documentation Records management Part 2: Guidelines ISO/IEC 15504Information technology Process assessment ISO 15614Specification and qualification of welding procedures for metallic materials Welding procedure test ISO 15686Buildings and constructed assets Service life planning ISO/IEC 15693Identification cards Contactless integrated circuit cards Vicinity cards ISO 15706Information and documentation International Standard Audiovisual Number (ISAN) ISO 15707Information and documentation International Standard Musical Work Code (ISWC) ISO 15783:2002 Seal-less rotodynamic pumps Class II Specification ISO 15836Information and documentation TheDublin Coremetadata element set ISO/IEC 15897Information technology Procedures for registration of cultural elements ISO 15924Information and documentation Codes for the representation of names of scripts ISO 15926 - Integration of Life-cycle Data for Process Plants including Oil and Gas Production Facilities ISO 15930 Graphic technology Prepress digital data exchange usingPDF[Note 3] ISO/IEC 15944 - Business Agreement Semantic Descriptive Techniques ISO/IEC 15948Information technology Computer graphics and image processing Portable Network Graphics(PNG): Functional specification ISO 15970Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor ISO 15971:2008 Natural gas Measurement of properties Calorific value andWobbe index ISO 15985:2004 Plastics Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions Method by analysis of released biogas ISO 16134Earthquake- and subsidence-resistant design of ductile iron pipelines ISO 16232Road vehicles Cleanliness of components of fluid circuits ISO 16232-8Particle nature determination by microscopic analysis ISO 16232-9Particle sizing and counting by automatic light extinction particle counter ISO 16232-10Expression of results ISO/IEC 16262 Information technology Programming languages, their environments and system software interfaces ECMAScriptlanguage specification ISO/IEC 16500Information technology Generic digital audio-visual systems ISO 16549Textiles Unevenness of textile strands Capacitance method ISO 16750Road vehicles Environmental conditions and testing for electrical and electronic equipment ISO/TS 16949Quality management systems Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations ISO/TR 16982:2002 Ergonomics of human-system interaction Usability methods supporting human-centred design ISO/IEC 17020:1998 General criteria for the operation of various types of bodies performing inspection ISO/IEC 17024:2003 Conformity assessment General requirements for bodies operating certification of persons ISO/IEC 17025General requirements for the competence of testing and calibration laboratories ISO 17088:2012 Specifications for compostable plastics ISO 17202Textiles Determination of twist in single spun yarns Untwist/retwist method ISO/PAS 17506 Industrial automation systems and integration COLLADAdigital asset schema specification for 3D visualization of industrial data ISO 17776Petroleum and natural gas industries Offshore production installations Guidelines on tools and techniques for hazard identification and risk assessment ISO 17799 - Code of Practice for Information Security Management (superseded byISO/IEC 27002) ISO 17894Ships and marine technology Computer applications General principles for the development and use of programmable electronic systems in marine applications ISO/IEC 18000Information technology Radio frequency identification for item management ISO/IEC 18000-1Reference architecture and definition of parameters to be standardized ISO/IEC 18000-2Parameters for air interface communications below 135kHz ISO/IEC 18000-3Parameters for air interface communications at 13,56MHz ISO/IEC 18000-4Parameters for air interface communications at 2,45GHz ISO/IEC 18000-6Parameters for air interface communications at 860MHz to 960MHz ISO/IEC 18000-7Parameters for active air interface communications at 433MHz ISO/IEC 18004 Information technology Automatic identification and data capture techniques QR Code2005 bar code symbology specification ISO/IEC 18009 Information technology Programming languages Ada: Conformity assessmentof a language processor ISO/IEC 18013Information technology Personal identification ISO-compliant driving license ISO/IEC 18013-1:2005 Physical characteristics and basic data set ISO/IEC 18013-2:2008 Machine-readable technologies ISO/IEC 18013-3:2009 Access control, authentication and integrity validation ISO/IEC 18014Information technology Security techniques Time-stamping services ISO/IEC 18023Information technology SEDRIS ISO/IEC 18023-1:2006 Functional specification ISO/IEC 18023-2:2006 Abstract transmittal format ISO/IEC 18023-3:2006 Transmittal format binary encoding ISO/IEC 18024-4:2006 Information technology SEDRIS language bindings Part 4: C ISO/IEC 18025:2005 Information technology Environmental Data Coding Specification (EDCS) ISO/IEC 18026Information technology Spatial Reference Model (SRM) ISO/IEC 18033Information technology Security techniques Encryption algorithms ISO/IEC 18033-1General ISO/IEC 18033-2Asymmetric ciphers ISO/IEC 18033-3Block ciphers ISO/IEC 18033-4Stream ciphers ISO/IEC 18041-4Information technology Computer graphics, image processing and environmental data representation Environmental Data Coding Specification (EDCS) language bindings Part 4: C ISO/IEC 18042-4:2006 Information technology Computer graphics and image processing Spatial Reference Model (SRM) language bindings Part 4: C ISO/IEC 18092Information technology Telecommunications and information exchange between systems Near Field Communication Interface and Protocol (NFCIP-1) ISO 18117:2009 Surface chemical analysis Handling of specimens prior to analysis ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials ISO/TS 18152Ergonomics of human-system interaction Specification for the process assessment of human-system issues ISO 18185Freight containers Electronic seals ISO 18245Retail financial services Merchant category codes ISO/TR 18529:2000 Ergonomics Ergonomics of human-system interaction Human-centred lifecycle process descriptions ISO 18629Industrial automation systems and integration Process specification language ISO 19005Document management Electronic document file format for long-term preservation ISO 19011Guidelines for quality and/orenvironmental management systemsauditing ISO 19092Financial services Biometrics Security framework ISO 19101Geographic information Reference model ISO/TS 19103Geographic information Conceptual schema language ISO/TS 19104Geographic information Terminology ISO 19105Geographic information Conformance and testing ISO 19106Geographic information Profiles ISO 19107Geographic information Spatial schema ISO 19108Geographic information Temporal schema ISO 19109Geographic information Rules for application schema ISO 19110Geographic information Methodology for feature cataloguing ISO 19111Geographic information Spatial referencing by coordinates ISO 19112Geographic information Spatial referencing by geographic identifiers ISO 19113Geographic information Quality principles ISO 19114Geographic information Quality evaluation procedures ISO 19115Geographic information Metadata ISO 19116Geographic information Positioning services ISO 19117Geographic information Portrayal ISO 19118Geographic information Encoding ISO 19119Geographic information Services ISO/TR 19120Geographic information Functional standards ISO/TR 19121Geographic information Imagery and gridded data ISO/TR 19122Geographic information / Geomatics Qualification and certification of personnel ISO 19123Geographic information Schema for coverage geometry and functions ISO 19125Geographic information Simple feature access ISO 19126Geographic information Feature concept dictionaries and registers ISO/TS 19127Geographic information Geodetic codes and parameters ISO 19128Geographic information Web map server interface ISO/TS 19129Geographic information Imagery, gridded and coverage data framework ISO/TS 19130Geographic information Imagery sensor models for geopositioning ISO 19131Geographic information Data product specifications ISO 19132Geographic information Location-based services Reference model ISO 19133Geographic information Location-based services Tracking and navigation ISO 19134Geographic information Location-based services Multimodal routing and navigation ISO 19135Geographic information Procedures for item registration ISO 19136Geographic information Geography Markup Language (GML) ISO 19137Geographic information Core profile of the spatial schema ISO/TS 19138Geographic information Data quality measures ISO/TS 19139Geographic information Metadata XML schema implementation ISO 19141Geographic information Schema for moving features ISO 19142Geographic information Web Feature Service ISO 19143Geographic information Filter encoding ISO 19144Geographic information Classification systems ISO 19146Geographic information Cross-domain vocabularies ISO 19156Geographic information - Observations and measurements ISO 19439Enterprise integration Framework for enterprise modelling ISO 19440Enterprise integration Constructs for enterprise modelling ISO/IEC 19501Information technology Open Distributed Processing Unified Modeling Language(UML) Version 1.4.2 ISO/IEC 19502Information technology Meta Object Facility(MOF) ISO/IEC 19503Information technology XML Metadata Interchange(XMI) ISO/IEC 19752Information technology Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components ISO/IEC 19757 Information technology Document Schema Definition Languages(DSDL) ISO/IEC 19757-2 Regular-grammar-based validation RELAX NG ISO/IEC 19757-3Rule-based validation Schematron ISO/IEC 19757-4Namespace-based Validation Dispatching Language(NVDL) ISO/IEC 19770Information technology Software asset management ISO/IEC 19785Information technology Common Biometric Exchange Formats Framework ISO/IEC 19788Information technology Learning, education and training Metadata for learning resources ISO/IEC 19790Information technology Security techniques Security requirements forcryptographicmodules ISO/IEC 19793 - Open Distributed Processing -- Use of UML for ODP system specifications ISO/IEC 19794Information technology Biometric data interchange formats ISO/IEC 19794-1:2011 Framework ISO/IEC 19794-2:2005 Finger minutiae data ISO/IEC 19794-3:2006 Finger pattern spectral data ISO/IEC 19794-4:2005 Finger image data ISO/IEC 19794-5:2005 Face image data ISO/IEC 19794-6:2005 Iris image data ISO/IEC 19794-7:2007 Signature/sign time series data ISO/IEC 19794-8:2006 Finger pattern skeletal data ISO/IEC 19794-9:2007 Vascular image data ISO/IEC 19794-10:2007 Hand geometry silhouette dataISO 20000 ISO 29999[edit] ISO/IEC 20000Information technology Service management ISO 20022Financial services UNIversal Financial Industry message scheme ISO 20653Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access ISO/IEC TR 20943Information technology Procedures for achieving metadata registry content consistency ISO/IEC TR 20943-1:2003 Data elements ISO/IEC TR 20943-3:2004 Value domains ISO/IEC 21000Information technology Multimedia framework (MPEG-21) ISO/IEC 21481Information technology Telecommunications and information exchange between systems Near Field Communication Interface and Protocol -2 (NFCIP-2) ISO 21482Ionizing-radiation warning Supplementary symbol ISO 21500Guidance on project management ISO 22000Food safety management systems Requirements for any organization in the food chain ISO/TS 22003Food safety management systems Requirements for bodies providing audit and certification of food safety management systems ISO 22093Industrial automation systems and integration Physical device control Dimensional Measuring Interface Standard (DMIS) ISO 22241Diesel engines NOx reduction agent AUS 32 ISO 22241-1Quality requirements ISO 22241-2Test methods ISO 22241-3Handling, transportation and storing ISO/IEC TR 22250Information technology Document description and processing languages Regular Language Description for XML(RELAX) ISO/IEC TR 22250-1:2002RELAXCore ISO 22301:2012 Societal security Business continuity management systems Requirements ISO/PAS 22399:2007 Societal security Guideline for incident preparedness and operational continuity management ISO 22716:2007 Cosmetics Good Manufacturing Practices(GMP) Guidelines on Good Manufacturing Practices ISO/IEC 23003Information technology MPEG audio technologies ISO/IEC 23003-1MPEG Surround ISO/IEC 23003-2 Spatial Audio Object Coding (SAOC) ISO/IEC 23270Information technology Programming languages C# ISO/IEC 23271 Information technology Common Language Infrastructure(CLI) ISO/IEC 23360Linux Standard Base(LSB) core specification 3.1 ISO/IEC 23360-1Generic specification ISO/IEC 23360-2Specification for IA32 architecture ISO/IEC 23360-3Specification for IA64 architecture ISO/IEC 23360-4Specification for AMD64 architecture ISO/IEC 23360-5Specification for PPC32 architecture ISO/IEC 23360-6Specification for PPC64 architecture ISO/IEC 23360-7Specification for S390 architecture ISO/IEC 23360-8Specification for S390X architecture ISO 23733Textiles Chenille yarns Test method for the determination of linear density ISO 23950Information and documentation Information retrieval (Z39.50) Application service definition and protocol specification ISO/IEC 24707:2007 Information technology Common Logic(CL): a framework for a family of logic-based languages ISO/IEC 24727Identification cards Integrated circuit card programming interfaces ISO/IEC 24727-1Architecture ISO/IEC 24727-2Generic card interface ISO/IEC 24727-3Application interface ISO/IEC 24727-4Application programming interface (API) administration ISO/IEC 24727-5 Testing procedures ISO/IEC 24727-6 Registration authority procedures for the authentication protocols for interoperability ISO/IEC 24744:2007 Software Engineering Metamodel for Development Methodologies ISO/IEC 24762:2008 Information technology Security techniques Guidelines for information and communications technology disaster recovery services ISO 26000Guidance on social responsibility ISO/IEC 26300 Information technology Open Document Format for Office Applications (OpenDocument) v1.0 ISO/IEC 27000Information technology Security techniques Information security management systems Overview and vocabulary ISO/IEC 27001Information technology Security techniques Information security management systems Requirements ISO/IEC 27002Information technology Security techniques Code of practice for information security management ISO/IEC 27003Information technology Security techniques Information security management system implementation guidance ISO/IEC 27004Information technology Security techniques Information security management Measurement ISO/IEC 27005Information technology Security techniques Information security risk management ISO/IEC 27006Information technology Security techniques Requirements for bodies providing audit and certification of information security management systems ISO/IEC 27011Information technology Security techniques Information security management guidelines for telecommunications organizations based on ISO/IEC 27002 ISO/IEC 27037:2012 Information technology Security techniques Guidelines for identification, collection, acquisition and preservation of digital evidence ISO/TS 27687:2008Nanotechnologies Terminology and definitions for nano-objects Nanoparticle, nanofibre and nanoplate ISO 28000Specification for security management systems for the supply chain ISO 28001:2007 Security management systems for the supply chain Best practices for implementing supply chain security, assessments and plans Requirements and guidance ISO 28003 Security management systems for the supply chain Requirements for bodies providing audit and certification of supply chain security management systems ISO 28004Security management systems for the supply chain Guidelines for the implementation of ISO 28000 ISO 28300:2008 Petroleum, petrochemical and natural gas industries Venting of atmospheric and low-pressure storage tanks ISO/IEC 29500 Information technology Document description and processing languages Office Open XMLFile Formats ISO/IEC 29500-1Fundamentals and Markup Language Reference ISO/IEC 29500-2Open Packaging Conventions ISO/IEC 29500-3Markup Compatibility and Extensibility ISO/IEC 29500-4Transitional Migration FeaturesISO 30000 ISO 39999. ISO 30000:2009 Ships and marine technology Ship recycling management systems Specifications for management systems for safe and environmentally sound ship recycling facilities ISO 31000:2009Risk management Principles and guidelines ISO/IEC 31010:2009Risk management- Risk assessment techniques ISO 32000 Document management Portable document format ISO/IEC 38500:2008 Corporate governance of information technologyISO 50000 - ISO 59999. ISO 50001:2011 Energy management systems Requirements with guidance for useISO 80000[. ISO/IEC 80000Quantities and units ISO/TS 80004Nanotechnologies Vocabulary ISO/TS 80004-1 Core terms ISO/TS 80004-3 Carbon nano-objects ISO/TS 80004-4 Nanostructured materials ISO/TS 80004-5 Nano/bio interface ISO/TS 80004-7 Diagnostics and therapeutics for healthcare

nokia solution and networks,Gurgaon, Bangalore SUB: applying for the post of International Graduate Trainee(Gurgaon)I am an electronic graduate from anna university seeking for international graduate trainee post( personal and qualification details are in resume). Being a fresher it is challenging and welcoming to be a part of nokia network. Moreover the exposure which i may get if selected is exciting and the organisation can expect a decent dedicated service from me.The description for the post truly get connected to myself and my immense interest in telecommunication field make me desperately to have the post. Also it is my pleasure to interact with other people and i dont have any backwardness involving in organisation culture or do have any cultural barriers.i sincerely wish to be a part of nokia networks and hopes that we will be meeting in future regarding the international graduate trainee post.yours faithfully.sujith sundareswaran,surabhi,elapully(po),palakkad,kerala-678622sujithsuins@gmail.com