ISIS Steam Brochure - Isis Steam - Official Valsteam Adca ...

www.isissteam.com

STEAM VALVE

SUPPLY & SYSTEM

DESIGN

STEAM TRAPS • PRESSURE REGULATORS • CONTROL VALVES • HEAT EXCHANGERS • SYSTEM DESIGN TRAP SURVEYS • SYSTEM AUDITS • TECHNICAL SUPPORT AND MUCH MORE...

ISIS Steam; bringing you the expertise and technical knowledge to represent,

promote and service the extensive Valsteam ADCA range.

The UK Partner for Valsteam ADCA

www.isissteam.com

YOUR UK PARTNER FOR VALSTEAM ADCAWith ISIS Steam and Valsteam ADCA working together, we are able to support all levels within the Steam Industry; End Users, Engineering Contractors, Boiler and Heat Transfer Manufacturers right through to on site maintenance requirements. All requests are handled with the same level of care, whether it is one replacement valve or designing and supplying a complete steam system.

ISIS Steam are specialists when it comes to all things steam, so if you require any advice or assistance with your steam system feel free to give us a call.

We are happy to advise with any aspect of your steam system; from complete system design, problem solving existing systems, to making sure you are maximizing your steam performance.

You are in safe hands with a national team of dedicated steam experts ready to assist.

01608 645755 [email protected]

STEAM TRAPS • PRESSURE REGULATORS • CONTROL VALVES • HEAT EXCHANGERS • SYSTEM DESIGN TRAP SURVEYS • SYSTEM AUDITS • TECHNICAL SUPPORT AND MORE...

One of the world’s leading steam equipment manufacturers.

VALVE SUPPLYISIS Steam are well placed to offer a truly complete solution. Our range includes; Manual & Actuated Valves, Steam Traps, Reducing Valves, Electric & Pneumatic Control Valves, Pipeline Ancillaries, Instrumentation and Fully Fabricated Systems. With a team of qualified engineers we are here to help.

STEAM SYSTEM DESIGNAre you installing a new steam system or adding new lines to an existing system? If so, then get in touch. At ISIS Steam our team of expert engineers have the knowledge required to fully design your steam and condensate system; from pipe sizing to valve and equipment specification, we have it covered.

THE STEAM TRAP, WHAT WOULD WE DO WITHOUT IT? Possibly the most crucial piece of equipment on any steam system. By removing the condensate from steam mains and low points in a system you establish consistent steam quality and protect your system from water hammer, ensuring that at the point of use the energy from the steam is completely utilised making your system efficient.

The theory is all well and good providing you know your steam traps are operating correctly, If they’re not then these efficiencies go out of the window. Your steam quality will deteriorate and the chances of water hammer become probable leading to wasted energy, bigger energy bills, greater CO² emissions and health & safety concerns. So what can you do to prevent this?

STEAM TRAP SURVEYSOur experienced engineers will test each steam trap to ensure it is functioning correctly, is suitable for the application and correctly installed. A steam trap inventory is then compiled detailing the operating conditions of each trap allowingan accurate steam loss calculation. From thiswe can show you the ROI for any remedial work that is required.

STEAM SYSTEM AUDITSWith ever growing fuel costs and a shortage in specialist skills it is more important than ever to ensure your steam system is operating efficiently and safely. This is why ISIS Steam offer fully bespoke steam system audits, tailoredto suit your needs, budget and objectives. System audits typically involve an assessment of the complete steam and condensate loop from the boiler house through to each process application. Items covered can include:

• Energy Savings

• Production Improvements

• Health & Safety


• Fault Finding

• System Design

• System Drawings

• Action List

www.isissteam.com www.isissteam.com

The correct steam trap is crucial for the efficient and safe operation of any steam system. From DN15 to DN150Pressures up to 160 barFlowrates of over 100,000 Kg/hr


PRESSURE REDUCING

VALVESPILOT OPERATED

DIRECT ACTINGHIGH CAPACITY

To reduce the pressure of steam or other gases and liquids a reliable pressure

reducing valve is required

From DN08 to DN150Direct acting or Pilot operated

SG Iron, Carbon or Stainless Steel

STEAM TRAPSUNIVERSAL

STEAM TRAPS

THERMOSTATIC BIMETALLIC

INVERTED BUCKET

THERMOSTATIC BALANCED

THERMODYNAMIC

FLOAT & THERMOSTATIC



OVERFLOW VALVE

TWO OR THREE WAY CAST STEEL

PIPELINE ANCILLARIESAlthough often overlooked, ancillary items are vital for the reliable and safe operation of any system. We have a vast range of pipeline ancillaries for steam and other gases and liquids

ISOLATION VALVES

Y-TYPE STRAINERS CHECK VALVES

VACUUM BREAKERS

AIR ELIMINATORS

SIGHT GLASSES

STAINLESS STEEL

CONTROL VALVESModern plants demand accurate distribution and control of fluids.

We can offer solutions for special applications; such as low noise

requirements, micro flow, cavitation protection and more

From DN15 to DN2002 way or 3 way design

Pneumatically or Electrically actuatedSG Iron, Carbon or Stainless Steel



SPECIAL EQUIPMENT

STEAM WATER

MIXERS

CONDENSATE PUMPS

DEAERATOR HEADS

These items are built around your application, they include a wide range of equipment for all parts of your steam system and boiler house.

FLASH VESSELS

HUMIDITY SEPARATORS

CLEAN STEAMWith the fully certified Valsteam ADCA clean factory we can offer a comprehensive range of sanitary steam equipment for pharmaceutical, food, chemical and cosmetic applications.

SAFETY RELIEF

VALVESThe Tosaca range of safety valves complement our product portfolio,

with in-house testing and setting at ISIS Steam we can dispatch

certified safety relief valves direct from our UK stock

From DN15 – DN300

SG iron, Carbon or Stainless SteelLifting lever or Dome topped

HEAT EXCHANGERS

BLOWDOWN TANKS

BOILER FEEDTANKS

SAMPLE COOLERS

ELECTRIC CONDENSATEPUMPINGPACKAGES



DO YOU REQUIRE HOT WATER GENERATION OR HEAT RECOVERY EQUIPMENT?ISIS Steam offer custom designed heat transfer packages to fit your needs.

The Valsteam ADCA range of Adcatherm heat transfer packages offers flexibility, simplicity and peace of mind.

Each system is built to your requirements from a plug and play solution reducing on-site labour and disruption time.

Adcatherm steam packages are available for LTHW, DHW, MTHW as well as secondary media such as oil, making the Adcatherm package the perfect solution for your needs.

With its high efficiencies, compact design and excellent heat transfer rates the Valsteam ADCA PAT plate heat exchangers are incorporated in many of our Adcatherm packages. Using the latest in high temperature gasket design allows main pressure steam to be used eliminating the need for a steam pressure reducing valve, making the package even more compact and space saving.

For applications where a plate heat exchanger is not suitable Valsteam ADCA offer the complete range of ST shell & tube heat exchangers. The use of extruded low fin tubes improves the thermal performance while making the unit shorter and lighter than many alternative shell & tube heat exchangers.

HEAT TRANSFER PACKAGES

With it’s modular design we can offer quick quotations and lead times on a package that is custom designed to fit your requirements.

Options include;

• Independent high temperature shut off valve

• Steam pressure reducing valve and safety valve

• Pump trap for condensate discharge

• Secondary recirculation pumping arrangement

• Buffer vessel for semi-instantaneous systems

And much more..

01608 645755 Station Yard, The Leys, Chipping Norton OX7 5HZ

[email protected] www.isissteam.com

STEAM TRAPS • PRESSURE REGULATORS • CONTROL VALVES • HEAT EXCHANGERS • SYSTEM DESIGN TRAP SURVEYS • SYSTEM AUDITS • TECHNICAL SUPPORT AND MUCH MORE...

Certificate Number FS 534522

TRUSTED BY

www.isissteam.com

ISIS Steam Brochure - Isis Steam - Official Valsteam Adca ...

Documents

Transcript of ISIS Steam Brochure - Isis Steam - Official Valsteam Adca ...