ISEA OTTO - PE OIL SEPARATOR - WASTEWATER PRE-TREATMENT
2
INSTALLATION MAINTENANCE PLANT DESCRIPTION CAPACITY PRODUCT CATEGORY PRODUCT NAME APPLICATION OTTO-PE FROM 1.5 TO 6.0 LITER PER SECOND 80 P A T E N T ED L I C E N C E The OTTO PE oil and hydrocarbon separator entirely made in polyethylene and designed for underground installation. This system is suitable for the treatment of waste waters containing oils from parking areas, mechanical workshops and petrol stations. In some particular cases it is also installed upstream of the mains sewage treatment. Dig a hole of appropriate dimensions. The bottom of the excavation must be leveled and compacted with a 10 cm layer of fine sand (grain size 0-5 mm). EXCAVATION Position the plant and connect the wastewater outlet pipe of the inlet of the OTTO PE. Connect the discharge pipe from the outlet of the OTTO PE to an inspection chamber. CONNECTION Fill the OTTO PE with clean water before backfilling to avoid collapse of the polyethylene structure during backfilling. Once the two main compartments are full, dump sand around the tank and level it. For a walk-on solution build a 5 cm thick light concrete layer on top of the tank and finish with a 40 cm thick soil. For a drive-on solution a reinforced concrete slab is required to protect the tank. Accessible manholes are required for inspection and maintenance. BACKFILLING A sand trap, which retains sand and inert material with a high specific gravity; . A coalescent filter, made an oil absorbent cushion suitable for the removal of oil emulsions; . An automatic closing device, which automatically closes the outlet pipe when the oil and hydrocarbons storage chamber is full to avoid the escape of such materials to the final effluent; . An oil and hydrocarbons storage chamber, in which separated oils and hydrocarbons are kept until removed and disposed in designated disposal areas. . Verify that the plant is correctly installed and positioned in order to allow a regular gravity flow. Periodically get a water sample from the system outlet for analysis. Clean the sand trap regularly to ensure a steady flow in the system. Clean the coalescent filter periodically and check the level of the oil and hydrocarbons collecting tank. OIL SEPARATOR WASTEWATER AND RAIN WATER FROM CAR WORKSHOPS, PETROL STATIONS AND CAR PARKS. OTT O-PE O-PE Certified Quality System
-
Upload
ag-metal-tretman-otpadnih-vodawastewater-treatment -
Category
Documents
-
view
194 -
download
8
description
AG-Metal Zenica - tretman otpadnih voda:- Tehnologija tretmana otpadnih voda,- Prodaja opreme za tretman otpadnih voda,- Consulting i potpora za projektante i investitore- Zakoni i propisi iz oblasti tretmana otpadnih voda u zemljama regijezapadnog BalkanaO tretmanu otpadnih voda više na www.ag-metal.baAG-Metal Zenica - wastewater treatment:- Waste water treatment technology,- Sale of equipment for wastewater treatment,- Consulting and support for planners and investors- Laws and regulations in the field of wastewater treatment incountries of the region Western BalkansThe treatment of wastewater more on www.ag-metal.ba
Transcript of ISEA OTTO - PE OIL SEPARATOR - WASTEWATER PRE-TREATMENT
INSTALLATION
MAINTENANCE
PLANT DESCRIPTION
CAPACITY
PRODUCT CATEGORY
PRODUCT NAME
APPLICATION
OTTO-PE
FROM 1.5TO 6.0 LITER PER SECOND
80
P
AT E NTED
L I C E
NC
EThe OTTO PE oil and hydrocarbon separator entirely made in polyethylene and designed for underground installation. This system is suitable for the treatment of waste waters containing oils from parking areas, mechanical workshops and petrol stations. In some particular cases it is also installed upstream of the mains sewage treatment.
Dig a hole of appropriate dimensions. The bottom of the excavation must be leveled and compacted with a 10 cm layer of fine sand (grain size 0-5 mm).
EXCAVATION
Position the plant and connect the wastewater outlet pipe of the inlet of the OTTO PE.Connect the discharge pipe from the outlet of the OTTO PE to an inspection chamber.
CONNECTION
Fill the OTTO PE with clean water before backfilling to avoid collapse of the polyethylene structure during backfilling. Once the two main compartments are full, dump sand around the tank and level it. For a walk-on solution build a 5 cm thick light concrete layer on top of the tank and finish with a 40 cm thick soil. For a drive-on solution a reinforced concrete slab is required to protect the tank.Accessible manholes are required for inspection and maintenance.
BACKFILLING
A sand trap, which retains sand and inert material with a high specific gravity;.A coalescent filter, made an oil absorbent cushion suitable for the removal of oil emulsions;
.
An automatic closing device, which automatically closes the outlet pipe when the oil and hydrocarbons storage chamber is full to avoid the escape of such materials to the final effluent;
.
An oil and hydrocarbons storage chamber, in which separated oils and hydrocarbons are kept until removed and disposed in designated disposal areas.
.
Verify that the plant is correctly installed and positioned in order to allow a regular gravity flow. Periodically get a water sample from the system outlet for analysis. Clean the sand trap regularly to ensure a steady flow in the system. Clean the coalescent filter periodically and check the level of the oil and hydrocarbons collecting tank.
OIL SEPARATOR
WASTEWATER AND RAIN WATER FROM CAR WORKSHOPS, PETROL STATIONS AND CAR PARKS.
OOTT TTO-PEO-PE
Certified Quality System
INFO
81
Code Item Rate L l H HE HU øE øU(l/s.) (cm) (cm) (cm) (cm) (cm) (mm) (mm)
0880 OTTO-PE 015 1.5 185 80 82,5 58 53 125 125
0881 OTTO-PE 030 3.0 210 80 82,5 58 53 125 125
0882 OTTO-PE 045 4.5 218 100 102,5 77 72 125 140
0883 OTTO-PE 060 6.0 233 100 102,5 77 72 140 140
ISEA guarantees that discharge water treated with OTTO PE conforms to the provisions of DIN 1999.
OTTO-PE - Oil separator
ØE ØUP
L
HE HUH
sand trap
PVC connections automatic closing devices PE hydrocarbons separator
coalescent filter
storage volume
PE lead PE cover
DIM
ENSI
ON
S &
DES
IGN
