8/12/2019 Is b 2001007

1/8

Bulletin No. : ISB-2001007

Date : August 16, 2001

Component

category: 00 -OTHERS

Bulletin Group : TECHNICAL INFORMATION

Distribution : WORLD WIDE

SUBJECT : Main issues for Scan-100 toolMODELS : Musso Korando ChairmanCONDITION: Recently SYMC found that many Scan-100 users may have some difficulties in

operating the Scan-100 for their use.

Statistics show that there are several main subjects which are most frequently asked, and

for that reason, SYMC releases this service bulletin.

CORRECTION :Tool informationA. Abbreviation of tool

1. PID : Serial Number

2. DID : Date ID.

3. SVID : Software Version ID

4. HVID : Hardware Version ID.

5. AID : Area ID.

6. MID : Maker ID.

B. Order procedure for the Scan-100 and CD ROM.

If you want to get more information to buy Scan-100 tool please contact to Mr S H HWANG

8/12/2019 Is b 2001007

2/8

3.16Pin adapter : This adapter allows Main connection to some EURO vehicle.

(Musso,Korando)

D. Diagnosis socket use

1. Musso and Korando models before 1998

[Terminal arrangement]

1. Ground 8. Blank2. Ignition switch ON 9. Full time T/C

3. Power supply B+ (12V) 10. Blank

4. REKES input memory 11. Cruse control

5. Engine RPM(Gasoline) 12. Blank

6. Part time T/C 13. ABS

7. STICS 14. Engine ECU

2. Musso and Korando models after 1998

[Terminal description]

1. Ground 11. Blank

3 2

567 4

1

91011

121314

8

1 2 3 4

14Pin adapter 20Pin adapter 16Pin adapter

8/12/2019 Is b 2001007

3/8

3. Chairman model

[Terminal description]

1. Ground 8. STICS

2. Ignition switch ON 9. Air bag

3. Power supply B+ (12V) 10. TCU

4. REKES input memory 11. Blank

5. Engine RPM(Gasoline) 12. ECS

6. Multision unit 13. ABS

7. Blank 14. Engine ECU

4. EURO for Musso and Korando : locked under the dashboard of driver seat

[Terminal description]

1. ECS 9. Air bag

2. Ignition switch ON 10. Blank

3. REKES input memor 11. Blank4. Ground 12. Full time T/C

5. Ground 13. Full & Part time T/C ,TOD

6. STICS 14. Auto T/M (BTRA-TCU)

7. Immobilizer 15. Blank

8. ABS 16. Power supply B+ (12V)

Trouble shoot gA. In case of that the D-Card program is impossible to be updated.

1.First of all, please check the version of the D-Card.

You can see the version no. when you turn on the Scan tool.

If the version is before October 2000, the D-Card should be updated with the new version.

2.If failed to transfer the data, please reset the PC through operating Prompt Only Mode

3 2

567 4

1

91011

121314

8

8 7 6 5 4 3 2 1

16 15 14 13 12 11 10 9

8/12/2019 Is b 2001007

4/8

C. The procedure of Scan-100 Update

1. Turn the Scan-100 off .

2. Connect communication port of PC to left input port of Scan-100 by using a download communication

cable named RS 232 connector.

3. Press "PWR" key in pushing a HOTKEY.("YES"+"NO"+"2")

And then screen of Scan-100 shall be display the "DOWN READY".

4. Perform a SCAN LOAD program.

Please refer to the file "Dwscan-e.doc"

8/12/2019 Is b 2001007

5/8

D. In case the Scanload program is not available at Windows NT.

If your customers have only Windows NT in O/S, please use the " MS-DOS Prompt Only "

into Re-Booting, and then do download using " POW384.EXE ".

E. No supply power to Scan-100.

1. Check point

a. Check the AC/DC adapter or the main connectorcable to confirm the normal power supply.

b. Remove the battery at Scan-100, and use the cable to supply power toScan-100.

(for check a main body)

8/12/2019 Is b 2001007

6/8

2.If there is on the screen, loop back test mode will be displayed.

If there is error on SIO(Serial Input/Output) of main board, the error message "ERROR"

for the appropriate SIO-NO. appears.

3.Connect the main loop back adapter to Scan-100 on this loop back mode condition and push

the "ENTER" key.

4.Push "ENTER" key, the main communication test results will be displayed automatically.

5.After doing the above procedure, If the Scan-100 does not work normal, the Scan-100 bugs.

In case of NO 5, you should send us Scan-100 main body to repair.

8/12/2019 Is b 2001007

7/8

G. Old model, Scanscope.

This model is not available to repair and to use for SYMC models any more.

so this model would be better svoitch to new model, Scan-100.

H. In the case of repair Scan-100 (Warranty)

The Scan-100 to be repaired should be dispatched to Jastech who is the supplier.

The contact point is as follow.

1. Air courier : DHL

2. DHL Account No of JASTECH : 590100153

3. DHL Expenses : Collect call base ( Borne by JASTECH )

4. Address of JASTECH : 1048-36, 3 F, JUNGJIN BUILDING, SADANG-DONG,

DONGJACK-KU, SEOUL, KOREA

5. Attn : Mr. Hak Jun. Lee

6. Tel : 82-2-588-5101~3

ATTACHMENT : Scan-100 Parts List.

8/12/2019 Is b 2001007

8/8

1. SCAN-100 Parts List SYMC2001. 7. 2

NO PART.NO PART.NAME STANDARD REMARK1 015-A0006 Manual For SCAN-1002 015-E001-1 Main Board For SCAN-1003 015-E001-2 I/O Board For SCAN-1004 015-E001-3 Lcd For SCAN-1005 015-E001-4 Key Pad For SCAN-1006 015-E001-5 Hard Cover For SCAN-1007 015-E001-6 Upper Case For SCAN-1008 015-E001-7 BottomCase For SCAN-1009 015-M1001 20 Pin Connector For SCAN-10010 015-M1002 14 Pin Connector For SCAN-10011 015-U0002 AC/DC Adaptor For SCAN-10012 015-U0004 Backup Battery For SCAN-10013 015-U0005 Mini Printer of SCAN-100 For SCAN-10014 015-U0006 Memory Card 4M bytes For Snap-Shot15 CB-96-0060 Main Cable of SCAN-100 For SCAN-10016 CB-96-0063 20 Pin Connector For SCAN-100 OBD-II, EOBD17 CB-96-0067-01 Scope Cable For SCAN-10018 CB-96-0067-02 Scope Probe For SCAN-10019 CB-96-0069-01 Cigareete Lighter Cable For SCAN-10020 CB-98-0002 Self Test Adaptor(A/D) For SCAN-10021 CB-98-0003 Self Test Adaptor(RS-232) For SCAN-10022 CB-98-0015 PC Cable For SCAN-10023 DC11017-A SCAN-100 Tester (T) SCAN100 + T24 DC11017-A1 Reprogarm Card 4M bytes25 DC11017-A4 Ssangyong Kits for SCAN-100 Manual+S+14P+16P+20P26 DC11017-A4-1 Progarm Ssngyong S27 SC11017-A Ssangyong Package SCAN100 + T + S 14P+16P+20P

T : LEMAN+ESPERO+CIERO+NEXIA+PRINCE+LANOS(T)+NUBIRA(J)+LEGANZA(V)

S : MUSSO+KORANO+CHAIRMAN+ISTANA+Y170

SC11017-A = DC11017-A + DC11017-A4