IRT Jules Verne - COMPOSITE ADDITIVE [email protected] Press contact...
1
Offer .................................. Support for the design of op�mised parts for FFF technology Part Produc�on (demonstrator, prototype) Feasibility study and POC (Proof of concept) Our R&D work .......................... Development of new materials Development of materials database Study of the influence of process parameters Process op�misa�on (robustness, in situ control, ...) COMPOSITE ADDITIVE MANUFACTURING HIGH TEMPERATURE FUSED FILAMENT FABRICATION TOBECA 666 Characteristics Technology Fused filament fabrication Sales contact [email protected] Press contact communica�[email protected] www.irt-jules-verne.fr Chamber dimension 600 mm x 600 mm x 500 mm Chamber temperature Up to 250°C Number of extruders 2 TOBECA MACHINE, HIGH TEMPERATURE Platform temperature Up to 250°C Maximum temperature of the nozzle 500°C Different nozzle diameters available (from 0.4 to 1mm) Polymer and composite materials Filament diameters 1.75mm Access to process parameters
Transcript of IRT Jules Verne - COMPOSITE ADDITIVE [email protected] Press contact...
Offer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Support for the design of op� mised parts for FFF technologyPart Produc� on (demonstrator, prototype)Feasibility study and POC (Proof of concept)
Our R&D work . . . . . . . . . . . . . . . . . . . . . . . . . .Development of new materialsDevelopment of materials databaseStudy of the infl uence of process parametersProcess op� misa� on (robustness, in situ control, ...)
COMPOSITE ADDITIVE MANUFACTURINGHIGH TEMPERATURE FUSED FILAMENT FABRICATION
TOBECA 666
Characteristics
Technology Fused filament fabrication
Sales [email protected]
Press contactcommunica� [email protected]
www.irt-jules-verne.fr
Chamber dimension 600 mm x 600 mm x 500 mm
Chamber temperature Up to 250°C
Number of extruders 2
TOBECA MACHINE, HIGH TEMPERATURE
Platform temperature Up to 250°C
Maximum temperature of the nozzle 500°C
Different nozzle diameters available (from 0.4 to 1mm)
Polymer and composite materials Filament diameters 1.75mm
Access to process parameters
![[IRT] Item Response Theory · 2019. 3. 1. · Title irt — Introduction to IRT models DescriptionRemarks and examplesReferencesAlso see Description Item response theory (IRT) is](https://static.fdocuments.net/doc/165x107/60f87abb593d3015bc4d5fae/irt-item-response-theory-2019-3-1-title-irt-a-introduction-to-irt-models.jpg)
