IRON, STEEL AND ALUMINIUM PRODUCTS · Flat-rolled products of iron or non-alloy steel, of a width...
Transcript of IRON, STEEL AND ALUMINIUM PRODUCTS · Flat-rolled products of iron or non-alloy steel, of a width...
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
1 7207110000 720711000 - - Of rectangular (including square) cross-section, the width
measuring less than twice the thicknessSIRIM
2 7207121000 - - - Slabs SIRIM
3 7207129000 - - - Other SIRIM
4 7207190000 720719000 - - Other SIRIM
5 7207201000 720720200 - - - Slabs SIRIM
6 7207202100 - - - - Blocks roughly shaped by forging; sheet bars SIRIM
7 7207202900 - - - - Other SIRIM
8 7207209100 720720900 - - - Slabs SIRIM
9 7207209200 - - - - Blocks roughly shaped by forging; sheet bars SIRIM
10 7207209900 - - - - Other SIRIM
11 7208100000 720810000 - In coils, not further worked than hot-rolled, with patterns in relief SIRIM
- Other,in coils ,not further worked than hot-rolled, pickled: SIRIM
12 7208250000 720825000 - - Of a thickness of 4.75mm or more SIRIM
13 7208260000 720826000 - - Of a thickness of 3mm or more but less than 4.75mm SIRIM
14 7208271100 - - - - Containing by weight 0.6% or more of carbon SIRIM
15 7208271900 - - - - Other SIRIM
16 7208279100 - - - - Containing by weight 0.6% or more of carbon SIRIM
17 7208279900 - - - - Other SIRIM
18 7208360000 720836000 - - Of a thickness exceeding 10mm SIRIM
19 7208370000 720837000 - - Of a thickness of 4.75mm or more but not exceeding 10mm SIRIM
20 7208380000 720838000 - - Of a thickness of 3mm or more but less than 4.75mm SIRIM
21 7208391000 720839200 - - - Containing by weight less than 0.6% of carbon and of a thickness
of 0.17mm or lessSIRIM
22 7208399000 720839900 - - - Other SIRIM
- Containing by weight less than 0.25% of carbon:
7207 12 - - Other, of rectangular (other than square) cross-section:
720712000
7207 20 - Containing by weight 0.25% or more of carbon:
IRON, STEEL AND ALUMINIUM PRODUCTS
Chapter 72
Iron and steel
II.- IRON AND NON-ALLOY STEEL
7207 Semi-finished products of iron or non-alloy steel.
- - - Other:
720720900
7208Flat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled,
not clad, plated or coated.
- - Containing by weight less than 0.6% of carbon:
- - - Other:
720720200
- - Other
720827000
- Other, in coils, not further worked than hot-rolled:
7208 39 - - Of a thickness of less than 3mm:
- - Of a thickness of less than 3mm:
7208 27 - - - Of a thickness of less than 2 mm:
720827000
7208 27 - - - Other:
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 7223 7208400000 720840000
- Not in coils, not further worked than hot-rolled, with patterns in
reliefSIRIM
24 7208510000 720851000 - - Of a thickness exceeding 10mm SIRIM/CIDB
25 7208520000 720852000 - - Of a thickness of 4.75mm or more but not exceeding 10mm SIRIM/CIDB
26 7208530000 720853000 - - Of a thickness of 3mm or more but less than 4.75mm SIRIM/CIDB
27 7208541000 720854200 - - - Containing by weight less than 0.6% of carbon and of a thickness
of 0.17mm or lessSIRIM/CIDB
28 7208549000 720854900 - - - Other SIRIM/CIDB
29 7209150000 720915000 - - Of a thickness of 3mm or more SIRIM
30 7209161000 - - - Of a width not exceeding 1,250mm SIRIM
31 7209169000 - - - Other SIRIM
32 7209171000 - - - Of a width not exceeding 1,250mm SIRIM
33 7209179000 - - - Other SIRIM
720918210 SIRIM
720918290 SIRIM
720918900 SIRIM
35 7209189100 720918210 - - - - Containing by weight less than 0.6% of carbon and of a thickness
of 0.17mm or lessSIRIM
720918290 SIRIM
720918900 SIRIM
37 7209250000 720925000 - - Of a thickness of 3 mm or more SIRIM
- - Of a thickness exceeding 1mm but less than 3mm:
38 7209261000 - - - Of a width not exceeding 1,250mm SIRIM
39 7209269000 - - - Other SIRIM
40 7209271000 - - - Of a width not exceeding 1,250mm SIRIM
41 7209279000 - - - Other SIRIM
42 7209281000 720928210 - - - Containing by weight less than 0.6% of carbon and of a thickness
of 0.17mm or lessSIRIM
43 7209289020 720928290 - - - - Containing by weight less than 0.6% of carbon SIRIM
44 7209289090 720928900 - - - - Other SIRIM
- Other, not in coils, not further worked than hot-rolled:
7209 16 - - Of a thickness exceeding 1mm but less than 3mm:
720916000
7209 17 - - Of a thickness of 0.5mm or more but not exceeding 1mm:
720917000
7208 54 - - Of a thickness of less than 3mm:
7209Flat-rolled products of iron or non-alloy steel, of a width of 600mm or more, cold-rolled
(cold-reduced), not clad, plated or coated.
- In coils, not further worked than cold-rolled (cold-reduced):
36 7209189900 - - - - Other
- Not in coils, not further worked than cold-rolled (cold-reduced):
7209 26
7209 18 - - Of a thickness of less than 0.5mm:
34 7209181000 - - - Tin-mill black plate
- - - Other
7209 28 90 - - - Other
7210Flat-rolled products of iron or non-alloy steel, of a width of 600mm or more, clad, plated
or coated.
- Plated or coated with tin:
720926000
7209 27 - - Of a thickness of 0.5mm or more but not exceeding 1mm:
720927000
7209 28 - - Of a thickness of less than 0.5mm:
7210 12 - - Of a thickness of less than 0.5mm:
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 7245 7210129000 721012200 - - - Other SIRIM
46 7210301100 - - - Of a thickness not exceeding 1.2mm SIRIM/CIDB
47 7210301200 - - - Of a thickness exceeding 1.2mm but not exceeding 1.5mm SIRIM/CIDB
48 7210301900 721030290 - - - Other SIRIM/CIDB
49 7210411100 - - - - Of a thickness not exceeding 1.2mm CIDB
50 7210411200 - - - - Of a thickness exceeding 1.2mm but not exceeding 1.5mm CIDB
51 7210491100
- - - - Coated with zinc by the iron-zinc alloyed coating method,
containing by weight less than 0.04% of carbon and of a thickness not
exceeding 1.2mm
SIRIM/CIDB
52 7210491200 - - - - Other, of a thickness not exceeding 1.2mm SIRIM/CIDB
53 7210491300 - - - - Of a thickness exceeding 1.2mm but not exceeding 1.5mm SIRIM/CIDB
54 7210491900 721049290 - - - - Other SIRIM/CIDB
55 7210611100 - - - - Of a thickness not exceeding 1.2mm SIRIM/CIDB
56 7210611200 - - - - Of a thickness exceeding 1.2mm but not exceeding 1.5mm SIRIM/CIDB
57 7210611900 721061390 - - - - Other SIRIM/CIDB
58 7210701100 721070210 - - - Painted SIRIM/CIDB
59 7210709110 721070290 - - - - Containing by weight less than 0.6% of carbon SIRIM/CIDB
60 7211131100 721113000 - - - - Hoop and strip; universal plates SIRIM
61 7211141300 721114210 - - - - Hoop and strip; universal plates SIRIM
62 7211141500 721114990 - - - - Coils for re-rolling SIRIM
63 7211141900 721114290 - - - - Other SIRIM
721030210
- Otherwise plated or coated with zinc:
7210 41 - - Corrugated:
- - - Containing by weight less than 0.6% of carbon
7210 30 - Electrolytically plated or coated with zinc:
- - Containing by weight less than 0.6% of carbon:
- Plated or coated with aluminium:
7210 61 - - Plated or coated with aluminium-zinc alloys:
- - - Containing by weight less than 0.6% of carbon:
721041210
7210 49 - - Other:
- - - Containing by weight less than 0.6% of carbon:
721049210
7210 70 91 - - - Painted:
7211Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad,
plated or coated.
- Not further worked than hot-rolled:
721061310
7210 70 - Painted, varnished or coated with plastics:
- - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less:
- - Other:
- - - Containing by weight less than 0.6% of carbon:
7211 19 - - Other:
- - - Containing by weight less than 0.6% of carbon:
7211 13 - - Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a
thickness of not less than 4 mm, not in coils and without patterns in relief:
- - - Containing by weight less than 0.6% of carbon:
7211 14 - - Other, of a thickness of 4.75mm or more:
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 72721119210 SIRIM
721119290 SIRIM
65 7211191500 721119290 - - - - Coils for re-rolling SIRIM
66 7211191910 - - - - - Of a thickness of 0.17mm or less SIRIM
67 7211191990 - - - - - Other SIRIM
68 7211231000 721123300 - - - Corrugated SIRIM
- - - Hoop and strip, of a width not exceeding 400mm:
69 7211232010 - - - - Of a width not exceeding 25mm SIRIM
70 7211232090 - - - - Other SIRIM
71 7211233000 721123900 - - - Other, of a thickness of 0.17mm or less SIRIM
72 7211239010 - - - - Hoop and strip, Of a width exceeding 400mm SIRIM
73 7211239090 - - - - Other SIRIM
721129130 SIRIM/CIDB
721129200 SIRIM/CIDB
721129110 SIRIM
721129200 SIRIM
721129190 SIRIM
721129200 SIRIM
721129110 SIRIM
721129190 SIRIM
721129200 SIRIM
78 7212201010 721220210 - - - Containing by weight less than 0.6% of carbon SIRIM/CIDB
79 7212202000 721220291 - - Other, containing by weight less than 0.6% of carbon and of a
thickness of 1.5mm or lessSIRIM/CIDB
80 7212301100 - - - Hoop and strip, of a width not exceeding 25mm SIRIM/CIDB
81 7212301200 - - - Hoop and strip, of a width exceeding 25mm and not exceeding
400 mmSIRIM/CIDB
82 7212301300 721230291 - - - Other, of a thickness of 1.5mm or less SIRIM/CIDB
83 7212301400 721230299 - - - Other, coated with zinc by the iron-zinc alloy coating method,
containing by weight less tha n 0 .0 4% of carbonSIRIM/CIDB
721230210 SIRIM/CIDB
721230291 SIRIM/CIDB
721230910 SIRIM/CIDB
7211 23 - - Containing by weight less than 0.25% of carbon:
7211 23 20
721123100
7211 23 90 - - - Other
64 7211191300 - - - - Hoop and strip; universal plates
7211 19 19 - - - - Other:
721119290
75 7211292000 - - - Hoop and strip, of a width not exceeding 400mm:
76 7211293000 - - - Other, of a thickness of 0.17mm or less
721123900
7211 29 - - Other:
74 7211291000 - - - Corrugated
7212 20 10 - - Hoop and strip, of a width not exceeding 400mm:
7212 30 - Otherwise plated or coated with zinc:
- - Containing by weight less than 0.6% of carbon:
77 7211299000 - - - Other
7212Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad,
plated or coated.
7212 20 - Electrolytically plated or coated with zinc:
- - Containing by weight less than 0.6% of carbon:
7212 40 11 - - - Hoop and strip, of a width not exceeding 400mm:
721230210
84 7212301900 - - - Other
7212 40 - Painted, varnished or coated with plastics:
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 7285 7212401110 - - - - Of a width not exceeding 25mm SIRIM/CIDB
86 7212401190 - - - - Other SIRIM/CIDB
87 7212401200 721240291 - - - Other hoop and strip SIRIM/CIDB
88 7212401900 721240299 - - - Other SIRIM/CIDB
89 7212501300 721250210 - - - Hoop and strip, of a width not exceeding 25mm SIRIM/CIDB
721250210 SIRIM/CIDB
721250910 SIRIM/CIDB
721250990 SIRIM/CIDB
721250299 SIRIM/CIDB
91 7212501910 721250291 - - - - Containing by weight less than 0.6% of carbon SIRIM/CIDB
92 7212502300 721250210 - - - Hoop and strip, of a width not exceeding 25mm SIRIM/CIDB
721250210 SIRIM/CIDB
721250910 SIRIM/CIDB
721250990 SIRIM/CIDB
721250299 SIRIM/CIDB
721250291 SIRIM/CIDB
721250299 SIRIM/CIDB
95 7212509300 721250299 - - - Hoop and strip, of a width not exceeding 25mm SIRIM/CIDB
721250210 SIRIM/CIDB
721250910 SIRIM/CIDB
721250990 SIRIM/CIDB
721250299 SIRIM/CIDB
97 7212509910 721250990 - - - - Containing by weight less than 0.6% of carbon SIRIM/CIDB
98 7213101000 721310000 - - Of circular cross-section measuring not exceeding 50mm in
diameterCIDB
99 7213109000 721310000 - - Other CIDB
100 7213200000 721320000 - Other, of free-cutting steel CIDB
101 7213911000 721391000 - - - Of a kind used for producing soldering sticks SIRIM/CIDB*
102 7213912000 721391000 - - - Of a kind used for concrete reinforcement (rebars) SIRIM/CIDB*
103 7213919000 721391000 - - - Other SIRIM/CIDB*
104 7213991000 721399000 - - - Of a kind used for producing soldering sticks SIRIM/CIDB*
721240210
7212 50 - Otherwise plated or coated:
7212 50 19 - - - Other:
- - Plated or coated with aluminium-zinc alloys:
7212 50 24 - - - Other hoop and strip; universal plates :
- - Plated or coated with chromium oxides or with chromium and chromium oxides:
7212 50 14 - - - Other hoop and strip; universal plates:
90 7212501490 - - - - Other
7212 50 94 - - - Other hoop and strip ; universal plates:
96 7212509490 - - - - Other
7212 50 99 - - - Other:
93 7212502490 - - - - Other
7212 50 29 - - - Other
94 7212502910 - - - - Containing by weight less than 0.6% of carbon
7213 91 - - Of circular cross-section measuring less than 14mm in diameter:
7213 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel.
7213 10 - Containing indentations, ribs, grooves or other deformations produced during the
rolling process:
- Other:
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 72105 7213992000 721399000 - - - Of a kind used for concrete reinforcement (rebars) SIRIM/CIDB*
106 7213999000 721399000 - - - Other SIRIM/CIDB*
- Forged:
107 7214101100 721410210 - - - Of circular cross-section SIRIM
108 7214101900 721410290 - - - Other CIDB
109 7214102100 721410910 - - - Of circular cross-section SIRIM
110 7214203100 721420210 - - - - Of a kind used for concrete reinforcement (rebars) CIDB
111 7214203900 721420210 - - - - Other CIDB
112 7214205100 721420910 - - - - Of a kind used for concrete reinforcement (rebars) CIDB
113 7214205900 721420910 - - - - Other CIDB
114 7214301000 721430100 - - Of circular cross-section SIRIM
- - Other
- - - Other
721499210 SIRIM
721499290 SIRIM
721499210 SIRIM
721499290 SIRIM
721499910 SIRIM
721499210 SIRIM
721499290 SIRIM
721499210 SIRIM
721499290 SIRIM
721499910 SIRIM
119 7215101000 721510100 - - Of circular cross-section SIRIM/CIDB
120 7215109000 721510900 - - Other SIRIM/CIDB
721550210
721550290
721550910
7214Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-
rolled, hot-drawn or hot-extructed, but including those twisted after rolling.
7214 10
- - Containing by weight less than 0.6% of carbon:
- - - Of circular cross-section:
- - Other
- - - Of circular cross-section:
- - Other:
7214 20 - Containing indentations, ribs, grooves or other deformations produced during the
rolling process or twisted after rolling:
- - Containing by weight less than 0.6% of carbon:
116 7214999200 - - - - Containing by weight 0.38% or more of carbon and less than
1.15% of manganese
117 7214999300 - - - - Containing by weight 0.17% or more but less than 0.46% of
carbon and 1.2% or more but less than 1.65% of manganese
7214 30 - Other, of free-cutting steel:
7214 99
- - - Containing by weight 0.6% or more of carbon, other than of circular cross-section:
115 7214999100 - - - - Containing by weight less than 0.38% of carbon, not more than
0.05% of phosphorus and not more than 0.05% of sulfur
7215 50 - Other, not further worked than cold-formed or cold-finished:
- - Other
121 7215509100 - - - Of a kind used for concrete reinforcement (rebars) CIDB
118 7214999900 - - - - Other
7215 Other bars and rods of iron or non-alloy steel.
7215 10 - Of free-cutting steel, not further worked than cold-formed
or cold- finished:
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 72721550210
721550290
721550910
123 7215901010 721590100 - - - Of circular cross-section CIDB
124 7215901090 721590900 - - - Other: CIDB
125 7215909010 721590100 - - - Of circular cross-section SIRIM/CIDB
126 7216100000 721610000 - U, I or H sections, not further worked than hot-rolled, hot-drawn or
extruded, of a height of less than 80 mmCIDB
- L or T sections, not further worked than hot-rolled, hot-drawn or
extruded, of a height of less than 80mm:CIDB
127 7216211000 721621000 - - - Containing by weight less than 0.6% of carbon SIRIM/CIDB
128 7216220000 721622000 - - T sections CIDB
129 7216311000 721631000 - - - Containing by weight 0.6% or more of carbon CIDB
130 7216319000 721631000 - - - Other CIDB
131 7216321000 721632000 - - - Of a thickness of 5mm or less CIDB
132 7216329000 721632000 - - - Other CIDB
133 7216331100 721633200 - - - - Thickness of the flange not less than thickness of the web CIDB
134 7216331900 721633200 - - - - Other CIDB
135 7216339000 721633900 - - - Other CIDB
721640100 SIRIM/CIDB
721640200 SIRIM/CIDB
721640100 SIRIM/CIDB
721640200 SIRIM/CIDB
- - Of a height of less than 80mm:
- - - Other:
138 7216501910 721650100 - - - - Angles CIDB
139 7216501990 721650200 - - - - Other CIDB
140 7216610014 721661100 - - - - Containing by weight less than 0.6% of carbon, of a height less
than 80mmCIDB
141 7216610020 721661200 - - - Shapes and sections CIDB
7215 90 10 - - Of a kind used for concrete reinforcement (rebars):
7215 90 90 - - Other:
7216 Angles, shapes and sections of iron or non-alloy steel.
122 7215509900 - - - Other SIRIM/CIDB
7215 90 - Other
7216 33 - - H sections:
- - - Containing by weight less than 0.6% of carbon
7216 40 - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height
of 80 mm or more:
136 7216401000 - - Containing by weight 0.6% or more of carbon
7216 21 - - L sections:
7216 31 - - U sections:
7216 32 - - I sections:
- - - Angles
7216 69 00 - - Other:
- - - Angles:
137 7216409000 - - Other
7216 50 - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or
extruded:
7216 61 00 - - Obtained from flat-rolled products:
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 72142 7216690014 721669100
- - - - Containing by weight less than 0.6% of carbon, of a height less
than 80mmCIDB
143 7216690020 721669200 - - - Shapes and sections CIDB
144 7217101000 721710000 - - Containing by weight less than 0.25% of carbon SIRIM/CIDB
145 7217102200 - - - Bead wire; reed wire; prestressed concrete steel wire; free-cutting
steel wireSIRIM/CIDB
146 7217102900 - - - Other SIRIM/CIDB
147 7217103200 - - - Spokes wire; bead wire; reed wire; free-cutting steel wire SIRIM/CIDB
148 7217103300 - - - Wire of a kind used for making strands for prestressing concrete SIRIM/CIDB
149 7217103900 - - - Other SIRIM/CIDB
150 7217201000 - - Containing by weight less than 0.25% carbon SIRIM/CIDB
151 7217202000 - - Containing by weight 0.25% or more but less than 0.45% of carbon SIRIM/CIDB
152 7217209100 - - - Steel core wire of a kind used for steel reinforced
aluminium conductors (ACSR) SIRIM/CIDB
153 7217209900 - - - Other SIRIM/CIDB
- Plated or coated with other base metals:
- - Containing by weight less than 0.25% of carbon:
154 7217301100 - - - Plated or coated with tin SIRIM/CIDB
155 7217301900 - - - Other SIRIM/CIDB
156 7217302100 - - - Plated or coated with tin SIRIM/CIDB
157 7217302900 - - - Other SIRIM/CIDB
158 7217303300 - - - Brass coated steel wire of a kind used in the manufacture of
pneumatic rubber tyresSIRIM/CIDB
159 7217303400 - - - Other copper alloy coated steel wire of a kind
used in the manufacture of pneumatic rubberSIRIM/CIDB
160 7217303500 - - - Other, plated or coated with tin SIRIM/CIDB
161 7217303900 - - - Other SIRIM/CIDB
162 7217901000 - - Containing by weight less than 0.25% of carbon SIRIM/CIDB
163 7217909000 - - Other SIRIM/CIDB
- Bars and rods, not further worked than cold-formed or cold-
finished:
164 7222201000 722220100 - - Of circular cross-section SIRIM
165 7222301000 722230100 - - Of circular cross-section SIRIM
7217 Wire of iron or non-alloy steel.
721710000
7217 20 - Plated or coated with zinc:
721720000
- - Containing by weight 0.45% or more of carbon:
7217 10 - Not plated or coated, whether or not polished:
- - Containing by weight 0.25% or more but less than 0.6% of carbon:
721710000
- - Containing by weight 0.6% or more of carbon:
721730000
- - Containing by weight 0.6% or more of carbon:
721730000
7217 90 - Other:
721720000
7217 30
721730000
- - Containing by weight 0.25% or more of carbon but less than 0.6% of carbon:
7222 40 - Angles, shapes and sections:
721790000
III.- STAINLESS STEEL
7222Other bars and rods of stainless steel; angles, shapes and sections of stainless
steel.
7222 20
7222 30 - Other bars and rods:
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 72722240110 SIRIM
722240190 SIRIM
722240200 SIRIM
722240110 SIRIM
722240190 SIRIM
722240200 SIRIM
168 7225301000 722530000 - - Of high speed steel SIRIM
169 7225309000 722530000 - - Other SIRIM/CIDB
170 7225401000 722540000 - - Of high speed steel SIRIM
171 7225409000 722540000 - - Other SIRIM/CIDB
172 7225501000 722550000 - - Of high speed steel SIRIM
173 7225509000 722550000 - - Other SIRIM
174 7227100000 722710000 - Of high speed steel SIRIM
175 7227200000 722720000 - Of silico-manganese steel SIRIM
176 7227900000 722790000 - Other SIRIM
177 7228301000 722830100 - - Of circular cross-section SIRIM/CIDB
178 7228309000 722830900 - - Other SIRIM/CIDB
179 7228401000 722840100 - - Of circular cross-section SIRIM/CIDB
180 7228409000 722840900 - - Other SIRIM/CIDB
181 7228501000 722850100 - - Of circular cross-section SIRIM/CIDB
182 7228509000 722850900 - - Other SIRIM/CIDB
183 7228601000 722860100 - - Of circular cross-section SIRIM/CIDB
184 7228609000 722860900 - - Other SIRIM/CIDB
722870110 CIDB
722870190 CIDB
722870200 CIDB
722870110 CIDB
722870190 CIDB
722870200 CIDB
166 7222401000 - - Not further worked than hot-rolled, hot-drawn or extruded
167 7222409000 - - Other
IV.- OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL
7225 Flat-rolled products of other alloy steel, of a width of 600 mm or more.
- Of silicon-electrical steel:
7225 30 - Other, not further workled than hot-rolled, in coils:
7225 40 - Other, not further worked than hot-rolled, not in coils:
7227 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel.
7228Other bars and rods of other alloy steel; angles, shapes and sections, of other
alloy steel; hollow drill bars and rods, of alloy or non-alloy steel.
7228 30 - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7228 40 - Other bars and rods, not further worked than forged:
7228 50
186 7228709000 - - Other
7228 80 - Hollow drill bars and rods:
- - Containing by weight 0.6% or more of carbon:
- Other bars and rods, not further worked than cold-formed or cold-finished:
7228 60 - Other bars and rods:
7228 70 - Angles, shapes and sections:
185 7228701000 - - Not further worked than hot-rolled, hot-drawn or extruded
7225 50 - Other, not further worked than cold-rolled (cold-reduced):
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 72187 7228801100 722880910 - - - Of circular cross-section CIDB
188 7228801900 722880990 - - - Other CIDB
189 7228809000 722880100 - - Other CIDB
190 7229200000 722920000 - Of silico-manganese steel CIDB
191 7301100000 730110000 - Sheet piling CIDB
192 7301200000 730120000 - Angles, shapes and sections CIDB
193 7302100000 730210000 - Rails SIRIM/CIDB**
194 7302901000 730290100 - - Sleepers (cross-ties) CIDB
195 7303001100 - - Hubless tubes and pipes CIDB
196 7303001900 - - Other CIDB
197 7303009100 - - With an external diameter not exceeding 100mm CIDB
198 7303009900 - - Other CIDB
199 7304110000 730411000 - - Of stainless steel SIRIM/CIDB***
200 7304190000 730419000 - - Other SIRIM/CIDB***
201 7304221000 730422000 - - - With yield strength less than 80,000 psi and not threaded pipe-
endSIRIM/CIDB***
202 7304231000 730423000 - - - With yield strength less than 80,000 psi and not threaded pipe-
endSIRIM/CIDB***
203 7304241000 730424000 - - - Casing and tubing with yield strength less than 80,000 psi and
not threaded endSIRIM/CIDB***
204 7304291000 730429000 - - - Casing and tubing with yield strength less than 80,000 psi and
not threaded endSIRIM/CIDB***
205 7304312000 730431100 - - - High-pressure pipe capable of withstanding a pressure of not less
than 42,000 psiSIRIM
7302
Railway or tramway track construction material of iron or steel, the following:
rails, check-rails and rack-rails, switch blades, crossing frogs, point rods and other
crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates
(base plates), rail clips, bedplates, ties and other material specialized for
jointing or fixing rails.
7302 90 - Others:
7303 Tubes, pipes and hollow profiles, of cast iron.
7229 Wire of other alloy steel.
Chapter 73
Articles of iron or steel
7301Sheet piling of iron or steel, whether or not drilled, punched or made from
assembled elements; welded angles, shapes and sections, of iron or steel.
7304 Tubes, pipes and hollow profiles, seamless, of iron
(other than cast iron) or steel. - Line pipe of a kind used for oil or gas pipelines:
- Casing, tubing and drill pipe, of a kind used in drilling for oil or gas:
- Tubes and pipes:
730300000
- Other :
730300000
7304 29 - - Other:
- Other, of circular cross-section, of iron or non-alloy steel:
7304 31 - - Cold-drawn or cold-rolled (cold-reduced):
7304 22 - - Drill pipe of stainless steel:
7304 23 - - Other drill pipe:
7304 24 - - Other, of stainless steel:
7304 39 - - Other:
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 72206 7304392000 730439100
- - - High-pressure pipe capable of withstanding a pressure of not
less than 42,000 psiSIRIM
207 7304399000 730439900 - - - Other SIRIM
730441100 SIRIM
730441900 SIRIM
730449100 SIRIM
730449900 SIRIM
730451100 SIRIM
730451900 SIRIM
211 7304519000 730451900 - - - Other SIRIM
212 7304591000 730459100 - - - High-pressure pipe capable of withstanding a pressure of not
less than 42,000 psiSIRIM
213 7304599000 730459900 - - - Other SIRIM
214 7304901000 730490100 - - High-pressure pipe capable of withstanding a pressure of not
less than 42,000 psiSIRIM
215 7304909000 730490900 - - Other SIRIM
216 7305110000 730511000 - - Longitudinally submerged arc welded CIDB
217 7305121000 - - - Electric resistance welded (ERW) CIDB
218 7305129000 - - - Other CIDB
219 7305191000 - - - Spiral or helical submerged arc welded CIDB
220 7305199000 - - - Other CIDB
221 7305200000 730520000 - Casing of a kind used in drilling for oil or gas CIDB
222 7305311000 - - - Stainless steel pipes and tubes CIDB
223 7305319000 - - - Other CIDB
224 7305391000 - - - High-pressure pipe capable of withstanding a pressure of not
less than 42,000 psiCIDB
225 7305399000 - - - Other CIDB
226 7305900000 730590000 - Other CIDB
209 7304490000 - - Other
- Other, of circular cross-section, of other alloy steel:
7304 51 - - Cold-drawn or cold-rolled (cold-reduced):
- Other, of circular cross-section, of stainless steel:
208 7304410000 - - Cold-drawn or cold-rolled (cold-reduced)
7305Other tubes and pipes (for example, welded, riveted or similarly closed),
having circular cross-sections, the external diameter of which exceeds
406.4mm, of iron or steel. - Line pipe of a kind used for oil or gas pipelines:
7305 12 - - Other, longitudinally welded:
210 7304512000 - - - High-pressure pipe capable of withstanding a
pressure of not less than 42,000 psi
7304 59 - - Other:
7304 90 - Other:
7305 31 - - Longitudinally welded:
730531000
7305 39 - - Other:
730539000
730512000
7305 19 - - Other:
730519000
- Other, welded:
7306Other tubes, pipes and hollow profiles (for example, open seam or welded,
riveted or similarly closed), of iron or steel. - Line pipe of a kind used for oil or gas pipelines:
7306 11 - - Welded, of stainless steel:
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 72227 7306111000 - - - Longitudinally electric resistance welded (ERW) CIDB
228 7306112000 - - - Spiral or helical submerged arc welded CIDB
229 7306119000 - - - Other CIDB
230 7306191000 - - - Longitudinally electric resistance welded (ERW) CIDB
231 7306192000 - - - Spiral or helical submerged arc welded CIDB
232 7306199000 - - - Other CIDB
233 7306210000 730621000 - - Welded, of stainless steel CIDB
- - Boiler tubes:
234 7306301100 - - - With external diameter less than 12.5mm SIRIM
235 7306301900 - - - Other SIRIM
236 7306302100 - - - With external diameter less than 12.5mm SIRIM
237 7306302900 - - - Other SIRIM
238 7306303000
- - Pipe of a kind used to make sheath pipe (heater pipe) for
heating elements of electric flat irons or rice cookers, with an external
diameter not exceeding 12mm
SIRIM
239 7306304100 - - - With external diameter less than 12.5mm SIRIM
240 7306304900 - - - Other SIRIM
241 7306309100
- - - With an internal diameter of 12.5mm or more, an external
diameter less than 140mm and containing by weight less than 0.45
% of carbon
SIRIM
242 7306309200 - - - With an internal diameter less than 12.5mm SIRIM
243 7306309900 - - - Other SIRIM
- - Boiler tubes:
244 7306401100 - - - With an external diameter not exceeding
12.5mmSIRIM
245 7306401900 - - - Other SIRIM
246 7306402000 - - Stainless steel pipes and tubes, with an external diameter
exceeding 105mmSIRIM
247 7306403000 - - Pipes and tubes containing by weight at least 30% of nickel,
with an external diameter not exceeding 10mmSIRIM
248 7306409000 - - Other SIRIM
249 7306501100 - - - With an external diameter less than 12.5mm SIRIM
250 7306501900 - - - Other SIRIM
251 7306509100 - - - With an external diameter less than 12.5mm SIRIM
252 7306509900 - - - Other SIRIM
253 7306611000 730661000 - - - With external diagonal cross-section less than 12.5mm SIRIM
730611000
7306 19 - - Other:
730619000
- - Casing and tubing of a kind used in drilling for oil or gas:
- - High-pressure pipe capable of withstanding a pressure of not less than 42,000 psi:
730630000
- - Other:
730630000
7306 30 - Other, welded, of circular cross-section, of iron or non-alloy steel:
730630000
- - Copper-plated, fluororesin-coated or zinc chromated steel tubes with an external
diameter not exceeding 15 mm:
730630000
- - Boiler tubes:
730650000
- - Other:
730650000
7306 40 - Other, welded, of circular cross-section, of stainless steel:
730640000
7306 50 - Other, welded, of circular cross-section, of other alloy steel:
- Other, welded, of non -circular cross-section:
7306 61 - - Of square or rectangular cross-section:
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 72254 7306619000 730661000 - - - Other SIRIM
255 7306691000 - - - With external diagonal cross-section less than 12.5mm SIRIM
256 7306699000 - - - Other SIRIM
- - Copper brazed pipes and tubes:
257 7306901100 730690000 - - - With external diagonal cross-section less than 12.5mm SIRIM
258 7306901900 730690000 - - - Other SIRIM
259 7306909100 - - - High pressure pipes capable of with standing a pressure of not
less than 42,000psi, with an internal diameter less than 12.5mmSIRIM
260 7306909200 - - - Other high pressure pipes SIRIM
261 7306909300 - - - Other, with external diagonal cross-section less than 12.5mm SIRIM
262 7306909900 - - - Other SIRIM
263 7308101000 - - Prefabricated modular type joined by shear connectors CIDB
264 7308109000 - - Other CIDB
- - Towers:
265 7308201100 - - - Prefabricated modular type joined by shear connectors CIDB
266 7308201900 - - - Other CIDB
267 7308202100 - - - Prefabricated modular type joined by shear connectors CIDB
268 7308202900 - - - Other CIDB
269 7308301000 - - Doors, of a thickness of 6mm or more but not
exceeding 8mmCIDB
270 7308309000 - - Other CIDB
271 7308401000 - - Prefabricated modular type joined by shear
connectorsCIDB
272 7308409000 - - Other CIDB
273 7308904000 730890200 - - Corrugated and curved galvanised plates or
sheets prepared for use in conduits, culverts or tunnelsCIDB
274 7308909200 730890910 - - - Guardrails CIDB
275 7308909900 730890990 - - - Other CIDB
730669000
7306 90 - Other:
- - Other:
7306 69 - - Of other non-circular cross-section:
7308 20 - Towers and lattice masts:
730820000
- - Lattice masts:
730690000
7308
Structures (excluding prefabricated buildings of heading 94.06) and parts of
structures (for example, bridges and bridge-sections, lock-gates, towers, lattice
masts, roofs, roofing frame-works, doors and windows and their frames and
thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel;
plates, rods, angles, shapes, sections, tubes and the like, prepared for use in
structures, of iron or steel.
7308 10 - Bridges and bridge-sections:
730810000
730840000
7308 90 - Other:
- - Other:
7312Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not
electrically insulated.
730820000
7308 30 - Doors, windows and their frames and thresholds for doors:
730830000
7308 40 - Equipment for scaffolding, shuttering, propping or pit-propping:
7312 10 - Stranded wire, ropes and cables:
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 72276 7312101000 - - Locked coil, flattened strands and non-rotating wire ropes SIRIM/CIDB
277 7312102000 - - Plated or coated with brass and of a diameter not exceeding 3
mmSIRIM/CIDB
278 7312109100 - - - Stranded steel wires for prestressing concrete CIDB
279 7312109900 - - - Other CIDB
280 7312900000 731290000 - Other CIDB
281 7314200000 731420000
- Grill, netting and fencing, welded at the intersection, of wire with
a maximum cross-sectional dimension of 3mm or more and having a
mesh size of 100cm 2 or more
SIRIM/CIDB
282 7314310000 731431000 - - Plated or coated with zinc SIRIM/CIDB
283 7314390000 731439000 - - Other SIRIM/CIDB
284 7314410000 731441000 - - Plated or coated with zinc SIRIM/CIDB
285 7314420000 731442000 - - Coated with plastics SIRIM/CIDB
286 7314490000 731449000 - - Other SIRIM/CIDB
287 7314500000 731450000 - Expanded metal SIRIM/CIDB
288 7325102000 732510100 - - Manhole covers, gratings and frames therefor CIDB
289 7325992000 732599100 - - - Manhole covers, gratings and frames thereof CIDB
290 7326909990 732690900 - - - - Other CIDB
291 7604101000 - - Bars and rods SIRIM/CIDB
292 7604109000 - - Other SIRIM/CIDB
293 7604211000 - - - Perforated tube profiles of a kind suitable for use in evaporator
coils of motor vehicle air conditioning machinesSIRIM/CIDB
294 7604219000 - - - Other SIRIM/CIDB
295 7606111000 - - - Plain or figured by rolling or pressing, not otherwise surface
treated CIDB
296 7606119000 - - - Other CIDB
7314Cloth (including endless bands), grill, netting and fencing, of iron or steel wire;
expanded metal of iron or steel
- Other grill, netting and fencing, welded at the intersection:
- Other cloth, grill, netting and fencing:
731210000
- - Other:
731210000
7325 99 - - Other:
7326 Other articles of iron or steel.
7326 90 - Other:
7325 Other cast articles of iron or steel.
7325 10 - Of non-malleable cast iron:
- Other:
7604 10 - Of aluminium, not alloyed:
760410000
- Of aluminium, alloys:
7604 21 - - Hollow profiles:
760421000
- - Other:
7326 90 99 - - - Other:
Chapter 76
Aluminium and articles thereof
7604 Aluminium bars, rods and profiles.
760611000
7606 Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm.
- Rectangular (including square):
7606 11 - - Of aluminium, not alloyed:
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019
NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODSCOA ISSUANCE
ORGANIZATION
Chapter 72
297 7606122000 760612000 - - - Aluminium plates, not sensitised, of a kind used in the printing
industrySIRIM/CIDB
298 7606123200 - - - - For making can stock including end stock and tab stock, in coils
SIRIM
299 7606123300 - - - - Other, of aluminium alloy 5082 or 5182, exceeding 1m in
width, in coilsSIRIM
300 7606123400 - - - - Other, litho grade sheet alloy HA 1052 hardness temper H19
dan alloy HA 1050 hardness temper H18SIRIM
301 7606123500 - - - - Other, surface worked SIRIM
302 7606123900 - - - - Other SIRIM
303 7606129000 - - - Other SIRIM/CIDB
304 7606910000 760691000 - - Of aluminium, not alloyed SIRIM
305 7606920000 760692000 - - Of aluminium alloys SIRIM
306 7607110000 760711000 - - Rolled but not further worked SIRIM
307 7607190000 760719000 - - Other SIRIM
Note 1 :
SIRIM/CIDB* 7213911000
7213912000
7213919000 - Steel Wire Rod = COA application to SIRIM
7213991000 - Steel Wire Rod for Wire Mesh and PC Strand =
7213992000 COA application to CIDB
7213999000
SIRIM/CIDB** 7302100000 - Construction Steel Rails = COA application to CIDB
- Other purpose of rails = COA application to SIRIM
SIRIM/CIDB*** 7304110000
7304190000
7304221000 - Oil & Gas purpose = COA application to CIDB
7304231000 - Other purpose = COA application to SIRIM
7304241000
7304291000
Note 2 :
PDK 2017 PDK 2012 REMARKS
XXXX XX XXX
XXXX XX XXX
XXXX XX XXXX
XXXX XX XXXX
XXXX XX XXXXMultiple HS Codes in PDK 2012 have been combined to single HS
Code in PDK 2017
XXXX XX XXXSingle HS Code in PDK 2012 has been divided to multiple HS Codes in
PDK 2017
- Other:
7607Aluminium foil (whether or not printed or backed with paper, paperboard, plastics
or similar backing materials) of a thickness (excluding any backing) not exceeding
0.2mm. - Not backed:
7606 12 - - Of aluminium alloys:
- - - Sheets :
760612000
SIRIM QAS INTERNATIONAL / CIDB
Issue No. 6 Rev. 0
Effective Date: 1 November 2019