Irfan Khalid Resume v2015may
-
Upload
muhammad-khalid -
Category
Documents
-
view
118 -
download
3
Transcript of Irfan Khalid Resume v2015may
Page 1 of 3
MUHAMMAD IRFAN KHALID
Address Residence MC-97, Street # 3, Green Town, Karachi, Pakistan.
Telephone Landline 92. 21. 34588817
Mobile 92. 321. 3887584 966.53.091.4815 (PREFERRED)
Email Personal [email protected]
OBJECTIVE
Seeking a challenging position in a dynamic organization with the aim to contribute towards organizational success by enhancing ethical and competency standards and to perform consistently and meet the organization’s expectations.
EDUCATION
Particulars Institute Year Achievements / Results
BE (Electronics) Bahria University (BU), Karachi
2011 Secured Cumulative GPA of 3.21 out of 4.00
GCE – A Levels Beaconhouse School System, Karachi
2007 Scored a percentage of 71%
GCE – O Levels Beaconhouse School System, Karachi
2005 Scored a percentage of 73%
EXPERIENCE
FIELD ENGINEER TRAINEE DHAHRAN OILFIELD SERVICES BASE, KHOBAR, SAUDI ARABIA
July 13, 2010 to September 8, 2010
COMPLETIONS – RESERVOIR MONITORING AND CONTROL (2 months)
I was a part of Completions department to complete my 8 weeks internship to complete my bachelor program and gain some valuable practical experience in work environment. My responsibilities included to engage with a task leader to complete the task within time and after the task completion, report to the supervisor or in-charge of how you accomplish the given task and was given a theoretical overview on it. My major responsibilities are:
- Operating Distributed Temperature Sensing (DTS) system i.e. using a double ended fiber optic cable to interpret the surrounding temperature and fiber length to assure virtuous working of DTS;
- To assure the working condition of gauges with the help of UniCONN device which is used to
interpret the down-hole temperature and pressure from varying crystal frequencies of gauges, particularly NLQG;
- Performing technical reception of packers (hydraulic tubing used to stop or let the flow of oil to the surface) and gauges and mark them with OK certification sticker;
- To maintain workshop manual (all service tools) of a department presented in a hard coded laminated form making it visually striking for anyone to find what he / she needs;
- Assisted project engineer, Mr. Stephen Mullen in troubleshooting Distributed Vibration Sensing (DVS) system use to detect any leakage in down-hole and perform fiber optic cable fusion splicing with the help of three steps cutter.
- To keep the computer system for DTS purpose, up to date with all security patches and fixes available at vendor’s website, Microsoft as system is running ‘Windows’ operating system.
My experience in Schlumberger has enabled me to develop a comprehensive understanding of the working of service tools for high quality production of oil and refreshed my basic concepts about physics and electronics where fiber cable and many electronic instruments used either for troubleshooting or for data processing. My detailed task accomplishments and system overview are mentioned in my internship report which will be available upon request, either in hard form or soft form.
Page 2 of 3
PROJECT ENGINEER Khobar, Kingdom of Saudi Arabia ARAMCO MAINTENANCE TEAM PHASE – I
I am working as a Project Engineer in Secutronic, AMT Phase – 1 department. My job role as a Project Engineer is to supervise my team in a project, solve or configure (program) any technical computer /
system level issue / device, performing periodic PM (preventative maintenance) and CM (corrective maintenance) of industrial security systems of leading oil company and our client, Saudi Aramco; if any and have direct and effective liaison with client. Below are some of my tasks accomplishments:
LEADING PROJECT ENGINEER: HAWIYAH GAS (H- 89) PLANT IDAS EXTENSION PROJECT
My experience in Secutronic has enabled me to develop my technical knowledge in industrial
security systems and network to fulfill all the requirements necessitated by the client / customer to
provide them with the highest level of security against any type of threat and herewith developing my
professional career in this immense and righteous region.
July 26, 2012 - Present
Achievements (Final Year Project)
DIGITAL IMPLEMENTATION OF IMAGE PROCESSING ALGORITHM (HISTOGRAM EQUALIZATION) ON FPGA
Summary
Our project’s aim is to enhance or equalize any 8 bit gray scale image either taken on hand or previously present using image
processing well known algorithm, Histogram Equalization which equalizes the histogram of an image. Our project is built on
Virtex 4 FPGA, ML-402 evaluation board kit with a maximum resolution to 160 × 160 according to FPGA Block RAM resources
present in it.
PERFORMED SITE SURVEY
1. Sabic – Ibn Sina co. – Jubail
Performed site survey of petrochemical
industry, SABIC co. With mutual
correspondence with security personnel for
cameras coverage, we examined each
location with camera type.
2. Saudi Aramco – Al Midra Tower Building
Performed site survey of Saudi Aramco’s
Al Midra Tower building for FLIR long
range demo camera with IR / Thermal.
Worked on FLIR long range camera (both
standard plus IR / Thermal camera) its
operation through software and configure it
according to client.
SAUDI ARAMCO MAINTENANCE Project
Working on IDAS, intrusion detection
and assessment system included working
on Vindicator V5, now upgraded to AVS,
alarm & video server which shows the field
sensor’s status and transmit video for
remote locations;
Further includes programming of network
cameras (adjusting masking, sensitivity,
noise rate), configuring DVR (Digital Video
Recorder) for proper camera video display;
Adjusting fiber optic intrusion detection
system using the software, SpectraView
and analyze graph characteristics.
AMG Video / Alarm Tx / Rx Upgrading
Managed the project for video & alarm
transmitters / receivers at two Saudi
Aramco Industrial Gas Plants;
Spread the working principle of the
new transmission devices among the
team and provide them with a blue
print;
Worked on the fiber optic fusion
splicing machine to upgrade the fiber
optic cables;
Provide any technical support needed in
case for optimum integration, testing
and commissioning of the project.
INDUSTRIAL DEVICES WORKED SO FAR
IP and non – IP cameras including PTZ also
(major: Cohu, Pelco, Axis);
Network Attached Storage (NAS) / NVR;
LG Iris Control system;
Vindicator V5 Network Security Solutions;
Radiant Alarm and Video Server (AVS);
IFS Transmission / Reception Devices;
AMG Transmission / Reception Devices;
Fiber Sensys Perimeter Fence Security
systems;
ECSI FOIDS Perimeter Fence Security
Solutions;
Juniper Industrial Data Switch;
Radiant Industrial Camera J-Boxes; Southwest Microwave Intrusion Detection.
Page 3 of 3
FPGA
Virtex 4 FPGA (ML – 402) Evaluation board kit
Platform Xilinx ISE 13.1 Design Suite; MATLAB (For hard coding image pixel values in Block RAM)
Language Verilog HDL (Hardware Descriptive Language)
IT PROFICIENCY EXTRA-CURRICULAR AND ACHIEVEMENTS
Proficient in electrical/electronic software, National Instruments: Multisim & Ultiboard, also hold
intermediate skill level in PCB designing;
Proficient in FPGA programming software, Xilinx ISE Design Suite, with holding intermediate skill level in
Verilog HDL programming language;
Proficient in all components of Microsoft Office;
Proficient in general purpose programming software, Microsoft Visual Studio, intermediate skill level in C#
language and C language;
Proficient in MATLAB software in mathematical,
image processing, filter design, control systems, etc. toolkits or modules;
Have 2 years’ experience in 2D & 3D designing
software, AutoCAD completed as a university course;
Proficient in software for hydraulic and pneumatic
simulation in logic creation, Fluidsim used in
automation industries;
Proficient in configuring hardware (cameras and its
related equipment);
Proficient in configuring and managing Vindicator VCC software for Intrusion Detection and Assessment
System;
Proficient in making and connecting devices to the desired network;
Proficient in using fiber optic intrusion detection
software, SpectraView;
Proficient in using CCTV softwares, DS Control
Point, Pelco Device Utility 2, RAIDar, Endura, FLIR Sensor Manager, COHU camera configuration utility;
Proficient in setting up the workstation incudes
installing of Windows Operating System, formatting the hard drives, backing up and restore, installing device drivers, operating system level troubleshooting and etc.
Participated in Inter school Table Tennis Tournament and succeeded as finalist;
Actively participated in sports such as cricket and table tennis at school level;
Actively participated in organizing the school fun fair.
HARDWARE SKILLS
Proficient in making own power supplies (either fixed,
variable or both) with short circuit protection; Proficient in FPGA hardware to use it accordingly and
synchronizing with PC and programming it;
Proficient in Printed Circuit Board (PCB) designing
on household level;
Proficient in filter designing using operational
amplifiers (low pass, high pass, band pass & band stop);
University projects (touch light, two transistor led
flasher, currency converter (C#), Automatic Temperature Control, Spectrum Analyzer (as an instrument) and Buck Boost converter);
Proficient in configuring devices with DIP switches
and understand the valued function of them.
Proficient in communication devices, video / data transmitter and receiver.
PERSONAL REFERENCES
Date of Birth: April 19, 1988
Nationality: Pakistani
Languages: English (fluent), Arabic (manageable) & Urdu
(native fluency)
Marital status: Single
IM: irfanhatim2006 (Skype)
References will be made available on request.