IQMLC-BROCHURE MechoSystems MechoShade

8/3/2019 IQMLC-BROCHURE MechoSystems MechoShade

1/4

Switching flexibility, multiplelevels of control

Any combination of switching including

Individual, Local, Sub-Group, Group and

Master control within each 4 motor

IQ/MLC using economical standard

motors.

Low voltage 12 voltDC controlCompatible with off-the shelf sun, sun/

wind, remote control, timers and A/V

system components.

Two modes of operation

Normal Mode Shades may stop any-

where at anytime and at 3 intermediate

stop positions.

Uniform Mode Shades may only stop

at pre-selected positions plus full up and

full down. This assures uniformity of shadepositioning.

Switching and reconfigura-tion without rewiring

Reconfigure switching requirements via

Assignment Dip Switches within the

IQ/MLC control unit;or add motors and

switches, by linking IQ/MLCs in series

within a low voltage control circuit.

LiteTouch H Series Sw

Sculptured architectural, 3 or 6 bu

unit, face plates in standard anod

aluminum, stainless steel and pri

finishes. Premium finish, special

for top of the line architectural de

include oil rubbed bronze and 24

gold plate.

he IQ/MLC

Window

Management System

ffers mid window

ignment and

esponsive multi-level

witch control...

ght at your finger tips.

MechoShade Systems, Inc.is pleased

to introduce the IQ/MLC controller.

The most advanced state-of-the-art

microprocessor-based window manage-

ment system utilizing ElectroShades

with

cost-effective standard (asynchronous)

motors in a point-to-point hardwired system.

The IQ/MLC has been developed toprovide unique features not available in any

other standard motor control system.

Mid window alignment withthree intermediate positions

Touch the appropriate combination of

buttons and the shades will align at either

full up, full down or any of the 3 default

or custom mid window positions according

to the motor/switch groupings assigned

in the IQ/MLC

control unit.

Q/MLC Window Managementor ElectroShadesQ/MLC Window Managementor ElectroShades

997, MechoShade Systems, Inc., Long Island City, NY.All rights reserved.

MASTER

LOCAL

Three default mid window alignment positions with up to five levels of switching control.

25%

50%

75%

Solar Control, LLC | 888-550-4836

SolarControlLLC.com


2/4

Control Systems Division

AUTO ALIGN YOUR SHADES

WITH THE IQ/MLC

INTERMEDIATE POSITION



FULLDOW

FULL

Time to start a newwindow management policy.Time to start a newwindow management policy.

Control Systems Division


SolarControlLLC.com


3/4

Switching flexibility, multiplelevels of control

Any combination of switching including

Individual, Local, Sub-Group, Group and

Master control within each 4 motor

IQ/MLC using economical standard

motors.

Low voltage 12 voltDC controlCompatible with off-the shelf sun, sun/

wind, remote control, timers and A/V

system components.

Two modes of operation

Normal Mode Shades may stop any-

where at anytime and at 3 intermediate

stop positions.

Uniform Mode Shades may only stop

at pre-selected positions plus full up and

full down. This assures uniformity of shadepositioning.

Switching and reconfigura-tion without rewiring

Reconfigure switching requirements via

Assignment Dip Switches within the

IQ/MLC control unit;or add motors and



LiteTouch H Series Sw

Sculptured architectural, 3 or 6 bu

unit, face plates in standard anod

aluminum, stainless steel and pri

finishes. Premium finish, special

for top of the line architectural de

include oil rubbed bronze and 24

gold plate.

he IQ/MLC

Window

Management System

ffers mid window

ignment and

esponsive multi-level

witch control...

ght at your finger tips.

MechoShade Systems, Inc.is pleased

to introduce the IQ/MLC controller.

The most advanced state-of-the-art

microprocessor-based window manage-

ment system utilizing ElectroShades

with

cost-effective standard (asynchronous)

motors in a point-to-point hardwired system.

The IQ/MLC has been developed toprovide unique features not available in any

other standard motor control system.

Mid window alignment withthree intermediate positions

Touch the appropriate combination of

buttons and the shades will align at either

full up, full down or any of the 3 default

or custom mid window positions according

to the motor/switch groupings assigned

in the IQ/MLC

control unit.

Q/MLC Window Managementor ElectroShadesQ/MLC Window Managementor ElectroShades

997, MechoShade Systems, Inc., Long Island City, NY.All rights reserved.

MASTER

LOCAL

Three default mid window alignment positions with up to five levels of switching control.

25%

50%

75%


SolarControlLLC.com


4/4

MechoShade Systems, Inc.

42-03 35th Street Long Island City New York 11101 Tel: 718-729-2020 Fax: 1 800 899-8081, 718-729-2941

Internet Web Site: http://www.mechoshade.com

SHADE and ELECTROSHADE are a registered trademark of MechoShade Systems, Inc. Long Island City, NY IQ/ MLC is a trademark of MechoShade Systems, Inc. Long Island City, NY

UCH is a registered trademark of LiteTouch, Inc., Salt Lake City Utah.

TAP

TAP TAP TAP

TAP

25%

50%

75%

M MM

LS2

LS3

LS2

LS1 LS1

LS4

LS3

M-1 M-4M-3M-2

ON

OFF

1 2 3 4 1 2 3 4

1 2 3 4 1 2 3 4

ON

OFF

ON

OFF

LS -1 LS -2

LS -3 LS -4

M-4M-3M-2M-1

1 2 1 23 4

ASSIGNMENT(DIP SWITCHES)

LS LS LS LS MS M SA

1 2 3 4 1 2 3 4

1 2 3 4 1 2 3 4

ON

OFF

ON

OFF

LS-1 LS-2

LS-3 LS-4

SS G EN DIP S I HES

LOC L SWITC ES M STESWITC

O A OT RS IG ME S

IQ/MLC IQ/MLC IQ/MLC

S S

; ; ; ;

; ; ; ;

; ; ; ;

T ree Q/MLCs / 3 Lo al Switc 2 Ma er Switc

S S

M MMMM

Assigning Local Switchesto motors is 1, 2 easy.Assign any of the 4 Local Switches to

any combination of 4 Shade Motors

controlled by the IQ/MLC to create up

to four levels of control plus Master

control:

1. Locate the appropriate Assignment

Dip Switch(s) within the IQ/MLCControl Unit for the Local Switch you

want to assign motors to.

2. Activate any combination of the four

Dip Switches to control the appropriate

motors.

Flexibility designed in.Two modes of operation: Normal Mode,

where shades may stop anywhere at any-

time and at 3 intermediate stop positions.

Uniform Mode, where shades may only

stop at pre-selected positions plus full up

and full down.This assures uniformity of

shade positioning

Alignment: Shades can be aligned with

any architectural detail by using the three

custom, user defined, intermediate mid

window positions.

Reconfiguration: Reconfigure without

rewiring. Reconfigure switching require-

ments via Assignment Dip Switches within

the IQ/MLC control unit; or add motors and



IQ/MLCs can be wired in series with

Master Switches that control the entire

system.

Aligning shades is simpleas tapping a button.1. Tap the top and middle button simultane-

ously for 25% down default position.

2. Tap the middle button for 50% down.

3. Tap the middle and bottom button simul-

taneously for 75% down default position.

4. Tap the top button for full up default

position.

5. Tap the bottom button for full down

default position.

Please see IQ/MLC specifications for additional Local and Master Switch functionality.

Local Switches control only those shade motors that have been assigned to them within an IQ/MLC control circuit.

Master Switches control all shade motors on an IQ/MLC control circuit.

Custom user defined intermediate window positions are used in this scenario

both above the door and the architectural details in the corners.

ince1876


SolarControlLLC com

IQMLC-BROCHURE MechoSystems MechoShade

Documents

Transcript of IQMLC-BROCHURE MechoSystems MechoShade