iPhone Debugging Cable - Do it yourself - or die trying
6
Stefan Horst <[email protected] > iPhone Debugging Cable do it yourself - or die trying http://www.sektioneins.de
-
Upload
i0n1c -
Category
Technology
-
view
4.766 -
download
4
description
This is a short presentation that shows you, what pieces you should buy for assembling an iPhone debugging cable, how much they cost and how you correctly assemble them.
Transcript of iPhone Debugging Cable - Do it yourself - or die trying
Stefan Horst <[email protected]>
iPhone Debugging Cable do it yourself - or die trying
http://www.sektioneins.de
Stefan Horst • Debug Cable • Juni 2013
What is needed?
• PodBreakout (12 EUR)
• for before v1.5 pinout is switched top to bottom
• FTDI Cable (17 EUR)
• USB Cable (1 EUR)
• 470kΩ Resistor (0.05 EUR)
2
Stefan Horst • Debug Cable • Juni 2013
Start with the FTDI cable
• solder the wires to this pins:
• RX -> pin 12
• TX -> pin 13
• GND -> pin 11
3
RX
(yel
low
)
TX (o
rang
e)
GN
D (b
lack
)
Stefan Horst • Debug Cable • Juni 2013
USB Cable next
• USB Connections:
• GND -> pin 16
• Power -> pin 23
• Data - -> pin 25
• Data + -> pin 27
4G
ND
(bla
ck)
Pow
er (r
ed)
Dat
a - (
whi
te)
Dat
a +
(gre
en)
Stefan Horst • Debug Cable • Juni 2013
Resistor Connection
• 470kΩ Resistor connection:
• pin 1 -> pin 21
5
Stefan Horst • Debug Cable • Juni 2013
Finished Product
6
![Debugging with gdb · Debugging Data Race Conditions: Section 12.2 [Data Race Detection], page 171. Debugging OpenMP*: Section 12.4 [OpenMP* Debugging], page 177. Extended recording](https://static.fdocuments.net/doc/165x107/5f0b5c707e708231d4302334/debugging-with-gdb-debugging-data-race-conditions-section-122-data-race-detection.jpg)
