IPEX Solvent Cements Catalogue - MARKS SUPPLY€¦ · IPEX Solvent Cements Catalogue IPEX SOLVENT...
Transcript of IPEX Solvent Cements Catalogue - MARKS SUPPLY€¦ · IPEX Solvent Cements Catalogue IPEX SOLVENT...
IPEX SolventCementsCatalogue
I P E X S O L V E N T C E M E N T S
CEMENTS, PRIMERS & APPLICATORSfor Industr ia l , Plumbing and Electr ica lPip ing sys tems.
IPEX Solvent CementsChoosing the correct cement is a vital link in a thermoplastic piping system. Although cement isone of the most critical components of a piping system, it is most often overlooked.
Cements are formulated to best meet specificneeds _ for example, general-purpose cement isthinner and less aggressive in bonding than heavy-duty industrial cement.
IPEX offers a wide range of high strength solventcements for thermoplastic piping systems. Regular,medium, heavy or extra heavy cements arespecially formulated for PVC pipe and fittings upto 900 mm (36") diameter for both pressure andnon-pressure applications, CPVC through 300 mm(12") diameter and ABS through 200 mm (8")diameter.
IPEX cements meet CSA LM26895 and/or ASTMD-2564 “Solvent Cements for (PVC) Plastic PipingSystems”, ASTM F493 “Solvent Cements for CPVCPlastic Pipe and Fittings” and ASTM D35 “SolventCements for ABS Plastic Pipe and Fittings”, whererequired.
IPEX offers a complete range of cements, primersand applicators so installers can choose theRIGHT ONE for their project and, following thebasic steps, be assured of a good joint every time.
Call your nearest IPEX representative forassistance with this critical part of your plasticpiping system. On-the-job training, videos andinstruction booklets are all available to help ensureyou achieve perfect results.
XIRTECTM Cements and Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3
Duraplus® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Plumbing Cements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6
Transition Cements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
System 15TM Cements and Primer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9
General Purpose Primers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Conduit Cement and Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Blazemaster® Cement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adhesives and Compounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Applicators and Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 16
XIR
TEC
CEMEN
TS&PRIM
ERD
UR
AP
LUS
CEMEN
TS&
PRIMER
PLU
MB
ING
CE
ME
NTS
TRA
NSITIO
NC
EM
EN
TSS
YS
TE
M15
CEMEN
TS&PRIM
ERG
EN
ER
AL
PU
RP
OSE
PR
IME
RS
CO
ND
UIT
CEMEN
TS&PRIM
ERB
LAZE
MA
STER
CE
ME
NT
AP
PLIC
ATOR
S&
AC
CE
SSOR
IES
AD
HE
SIVE
S&
CO
MP
OU
ND
S
Table of Contents
Please refer to the IPEX Solvent Cementing Guide for detailed procedures describing use of IPEX solvent cement. Adhering to recommended set-up procedures and cure times will ensuresuccessful joints.
2
XIR
TEC
CEM
ENTS
&PR
IMER Cements & Primer
GREY3 Year Shelf Life Meets ASTM D-2564Medium-bodied, fast setting, PVC cement for all classes and schedulesthrough 6" diameter interference fit, Schedule 80 through 4" diameter.This product may also be used on PVC foam core pipe.
Size ml (U.S.) Product Code Units per Case118 (1/4 pt) 074344 24
236 (1/2 pt) 074345 24
473 (pt) 074346 12
946 (qt) 074347 12
3785 (gal) 074348 6
GREY3 Year Shelf Life Meets ASTM D-2564Heavy-bodied, medium setting, PVC cement for all classes and schedulesthrough 12" diameter, including Schedule 80. It has good gap filling properties and its medium set allows more working time in warm weather.
XIRTEC 11, Industrial PVC Cement
XIRTEC 05, Industrial PVC Cement
GREY3 Year Shelf LifeMeets ASTM D-2564Heavy-bodied, medium setting, PVC cement for all classes and schedulesthrough 12" diameter, including Schedule 80. It has good gap filling properties and its medium set allows more working time in warm weather.
XIRTEC 17, Industrial PVC Cement
Size ml (U.S.) Product Code Units per Case236 (1/2 pt) 074362 24
473 (pt) 074363 12
946 (qt) 074364 12
3785 (gal) 074365 6
Size ml (U.S.) Product Code Units per Case473 (pt) 074443 12
946 (qt) 074379 12
3785 (gal) 074133 6
3
XIR
TEC
CEMEN
TS&PRIM
ER
XIRTEC 19, Industrial PVC CementGREY3 Year Shelf LifeMeets ASTM D-2564Extra heavy-bodied, slow setting, PVC cement for all classes and schedules through 30" diameter, including Schedule 80. It is a good fabrication cement, as it has excellent gap filling properties, and because of its slow set, it is ideal for hot weather cement on large diameter pipe.
Size ml (U.S.) Product Code Units per Case3785 (gal) 074387 6
ORANGE2 Year Shelf LifeMeets ASTM F-493Heavy-bodied, medium setting, CPVC cement for all classes and schedules through 12" diameter. Formulated for improved chemical resistance to caustics including hypochlorite solutions. May be used onPVC industrial piping systems for chemical applications. Approved forCorzan™* Industrial Systems.
XIRTEC 24, Industrial CPVC Cement
PURPLE/CLEAR3 Year Shelf LifeMeets ASTM F-656Xirtec 7 is the most aggressive PVC and CPVC primer commercially available. Excellent product for cold weather applications. If used properly Xirtec 7 will soften pipe and fitting surfaces which is necessary for the proper solvent welding of the materials.
XIRTEC 7, Primer
Size ml (U.S.) Product Code Units per Case473 (pt) 074008 12
946 (qt) 074009 12
Size ml (U.S.) PC Purple PC Clear Units per Case118 (1/4 pt) 074334 074339 24
236 (1/2 pt) 074335 074340 24
473 (pt) 074336 074341 12
946 (pt) 074337 074342 12
3785 (gal) 074338 074343 6
purple only
*Corzan™ is a registered trademark of Noveon Inc. Low VOC
4
DU
RA
PLU
SCE
MEN
TS&
PRI
MER
Cements & Primer
GREY1 Year Shelf LifeMedium-bodied, fast setting ABS cement for all sizes and products inthe Duraplus Industrial line.The Grey Duraplus ABS solvent cement, ismanufactured from ABS particles identical to the material used for themanufacturing of Duraplus Industrial components.The particles aredispersed in high purity Methyl Ethyl Ketone (MEK) solvent base.Thecement is designed to withstand continuous applied pressures up to 230psi@ 73ºF. Duraplus MEK primer must be used prior to cementing.
Size ml (U.S.) Product Code Units per Case473 (pt) 337466 20
946 (qt) 337467 12
LIGHT BLUE1 Year Shelf LifeMedium-bodied, fast setting ABS cement for all sizes and products inthe Duraplus Air-Line. Duraplus ABS solvent cement, is manufacturedfrom ABS particles identical to the material used for the manufacturing ofDuraplus Air-Line components.The particles are dispersed in high purityMethyl Ethyl Ketone (MEK) solvent base.The cement is designed towithstand continuous applied pressures up to 185psi @ 73ºF. DuraplusMEK primer must be used prior to cementing.
Duraplus Air-Line Cement
Duraplus Industrial Cement
CLEARDuraplus MEK Cleaner/Primer must be used prior to solvent cementing ofany Duraplus Industrial or Duraplus Air-Line products.
Duraplus MEK Cleaner/Primer
Size ml (U.S.) Product Code Units per Case473 (pt) 437354 20
946 (qt) 437355 12
Size ml (U.S.) Product Code Units per Case473 (pt) 337468 20
946 (qt) 337469 12
5
PLU
MB
ING
CE
ME
NTS
Plumbing Cements
CLEAR/GREY3 Year Shelf LifeMeets ASTM D-2564Medium-bodied, fast setting, PVC cement for all classes and schedulesthrough 6" diameter interference fit, Schedule 80 through 4" diameter.Thisproduct may also be used on PVC foam core pipe. No primer needed fordrainage applications unless required by local code.
Size ml (U.S.) Prod Code Clear Prod Code Grey118 (1/4 pt) 074314 -
236 (1/2 pt) 074313 -
473 (pt) 074312 074275
946 (qt) 074311 074801
3785 (gal) 074310 074800grey only
AQUA BLUE3 Year Shelf LifeMeets ASTM D-2564Medium-bodied, extremely fast setting, PVC cement for all classes andschedules through 6" diameter interference fit, Schedule 80 through 4" diameter. Specially formulated for rigid and flexible applications whereconditions are very wet and/or when quick pressurization is desired.
IPEX 25 PVC Wet/Dry
IPEX 04, PVC General Purpose Cement
BLUE- Blue fades to clear3 Year Shelf LifeMeets ASTM D-2564Medium-bodied, extremely fast setting, PVC cement for all classes andschedules through 6" diameter interference fit, Schedule 80 through 4" diameter. Developed for rigid & flexible applications, wet conditions and/orwhen quick pressurization is desired.
IPEX 47 PVC Pool/Spa
Size ml (U.S.) Product Code Units per Case236 (1/2 pt) 074392 24
473 (pt) 074393 12
946 (qt) 074394 12
3785 (gal) 074395 6
Size ml (U.S.) Product Code Units per Case118 (1/4 pt) 074152 24
473 (pt) 074150 12
946 (qt) 074139 12
3785 (gal) 074137 6
6
PLU
MB
ING
CE
ME
NTS
IPEX 95 PVC Flex
CLEAR3 Year Shelf LifeMedium-bodied, fast setting, PVC cement for all flex/flex & flex/rigidPVC pipe and fittings through 6" diameter interference fit, Schedule 80through 3" diameter. Excellent product for flex/rigid applications. It has anelastomer in the formulation which allows a more flexible joint.
IPEX 71 ABS
Size ml (U.S.) Product Code Units per Case118 (1/4 pt) 074440 24
236 (1/2 pt) 074163 24
473 (pt) 074411 12
946 (qt) 074412 12
3785 (gal) 074413 6
YELLOW3 Year Shelf LifeMeets ASTM D-2235Medium-bodied, fast setting, ABS cement for all classes and schedulesthrough 8" diameter.
Size ml (U.S.) Product Code Units per Case118 (1/4 pt) 074183 24
236 (1/2 pt) 074182 24
473 (pt) 074181 12
946 (qt) 074180 12
3785 (gal) 074179 6
Plumbing Cements
7
TRA
NSITIO
NC
EM
EN
TS
WHITE3 Year Shelf LifeMeets ASTM D-3138Regular-bodied, fast setting, ABS to PVC transition cement for allclasses and schedules through 6" diameter interference fit (except Schedule80). CSA certification for non-pressure ABS/PVC transition joints only.
Size ml (U.S.) Product Code Units per Case236 (1/2 pt) 074459 24
473 (pt) 074461 12
946 (pt) 074992 12
IPEX 96 ABS/PVC Transition Cement
Transition Cements
CLEAR3 Year Shelf LifeMeets ASTM F-493Medium-bodied, fast setting, low pressure, PVC, CPVC and ABS multi-purpose cement for all classes and schedules through 6" diameterinterference fit, Schedule 80 through 4" diameter.
Size ml (U.S.) Product Code Units per Case236 (1/2 pt) 074401 24
473 (pt) 074402 12
946 (qt) 074403 12
IPEX 90 PVC/CPVC/ABS Transition Cement
8
SY
ST
EM
15CE
MEN
TS&
PRIM
ER
GREYMedium-bodied, fast setting, suitable for 11/2 – 6", without primer.
IPEX System 15TM DWV One-Step Cement
Size ml (U.S.) Product Code Units per Case473 (pt) 074098 12
946 (qt) 074097 12
3785 (gal) 074096 6
GREYHeavy-bodied, medium setting, grey, suitable for 11/2 – 6", without primer.Not recommended for use below 0ºC (32ºF).
IPEX System 15TM DWV One-Step Cement
Size ml (U.S.) Product Code Units per Case946 (qt) 074232 12
3785 (gal) 074231 6
Cements & Primer
9
SY
ST
EM
15CEM
ENTS&
PRIMER
Extra heavy-bodied, slow setting, suitable for System 15 8" to 24" wheregap filling is required. Use with System 15 DWV primer.
IPEX System 15TM DWV Two-Step Cement
Size ml (U.S.) Product Code Units per Case946 (qt) 074350 12
3785 (gal) 074351 6
A primer suitable for use with System 15 DWV Two-Step Cement.
Size ml (U.S.) Product Code Units per Case946 (qt) 074354 12
3785 (gal) 074355 6
IPEX System 15TM DWV Primer
Low VOC
AQUA BLUE3 Year Shelf LifeMeets ASTM F-656Primer specifically for use with IPEX 25 Wet/Dry cement. Excellentprimer for wet applications or when quick penetration of pipe and fittingsurfaces is desired.
IPEX 5 Wet/Dry Primer
Size ml (U.S.) Product Code Units per Case236 (1/2 pt) 074396 24
473 (pt) 074397 12
946 (qt) 074398 12
Low VOC
10
GE
NE
RA
LP
UR
PO
SEP
RIM
ER
S
CLEAR3 Year Shelf LifeMeets ASTM F-656For surface preparation of all PVC and CPVC pipe and fittings prior tocement application. If used properly, the primer will soften pipe and fittingsurfaces which is necessary for the proper solvent welding of materials.
IPEX 6 Primer
Size ml (U.S.) Product Code Units per Case118 (1/4 pt) 074244 24
473 (pt) 074242 12
946 (qt) 074241 12
3785 (gal) 074240 6
General Purpose Primers
11
CO
ND
UIT
CEMEN
TS&PRIM
ERC
ON
DU
ITCEM
ENTS&
PRIMER
CLEAR3 Year Shelf LifeUse IPEX 100 conduit cement to create solid, waterproof joints whenconnecting electrical PVC conduit pipe.The cement is approved for use withrigid PVC conduit such as IPEX’s Scepter Rigid PVC conduit & fittings,CORLINE ENT and Kwikon ENT fittings, and Super Duct DB-2 duct & fittings.
IPEX 100 Conduit Cement
Dimension Size ml Product Code Units per Case250 074713 24
475 074714 12
950 074715 12
4L 074716 4
c/w screw top & dauber
CLEAR3 Year Shelf LifeIPEX 100T Pipe Primer cleans and prepares the surfaces of conduit pipeand fittings to permit proper solvent cementing. For extreme cold weatherinstallations, the use of IPEX PVC Primer is recommended. Follow withIPEX 100 Conduit Cement for a solid, waterproof joint.
IPEX 100T Conduit Primer
Dimension Size ml Product Code Units per Case250 074306 24
475 074307 12
950 074308 12
4L 074309 4
c/w screw top & dauber
Conduit Cement & Primer
12
BLA
ZEM
AST
ER
CE
ME
NT
BlazeMaster® Cement
IPEX BlazeMaster* One-Step CementORANGE2 Year Shelf LifeIPEX Blazemaster® One-Step Cement is a heavy-bodied cementspecifically for use with Blazemaster® Fire Sprinkler System. For use withpipe and fittings up to 6" in diameter.
Size ml (U.S.) Product Code Units per Case473 (pt) 074328 12
946 (qt) 074329 12*BlazeMaster is a registered trademark of Noveon Inc.
13
AD
HE
SIVE
S&
CO
MP
OU
ND
S
WHITE1 Year Shelf LifeTwo-component, high-strength reactive adhesive for joining, fabricating andrepairing PVC and CPVC pipe and fittings. Bonds PVC and CPVC todissimilar materials such as metals, concrete, clay and others.
IPEX / IPS 810 Reactive Adhesive
Size ml (U.S.) Product Code Units per Case118 (1/4 pt) 074176 24
Low VOC
IPEX Pipe Thread Compound
LIGHT BLUEIPEX industrial-grade pipe thread compound is a slow drying, soft setting,non-hardening pipe thread compound. Suitable for use with ABS (DWV only), PVC, CPVC, Blazemaster*, nylon and polypropylene.Recommended for on-site or assembly line work. Lead-free and non-toxic.
Size ml (U.S.) Product Code Units per Case236 (1/2 pt) 048032 24
473 (pt) 048033 12
946 (qt) 048034 12
Adhesives & Compounds
*BlazeMaster is a registered trademark of Noveon Inc.
14
AP
PLI
CAT
OR
S&
AC
CE
SSO
RIE
S
Applicators and Accessories
PB-1: Plastic Handle Brush; fits standard pint and quart cans.CM BCP Can-Mate: Adjustable Plastic Handle Natural Bristle Brush;fits standard pint and quart cans.
Bristle Brush / Cap
Adjustable plastic applicator with telescoping stem to fit all cans (except1/4 pint). Available in 3/4" and 11/2" dauber sizes.
Can-Mate Dauber
Size mm (U.S.) Product Code Units per Case20 (3/4) 074436 100
40-75 (11/2 -3) 074437 100
DP daubers fit 1/2 pint & pint cans; DQ daubers fit quart cans. Available in1/2", 3/4", and 11/2" dauber sizes.
Cap Daubers
Size mm (U.S.) Product Code Units per Case12 (1/2) 074455 100
20 (3/4) 074420 100
40 (11/2) 074421 100
40 (11/2) 074422 100
Size mm (U.S.) Product Code Units per Case25 1 074428 100
25 1 074454 100
15
AP
PLIC
ATOR
S&
AC
CE
SSOR
IES
4020 swab for pipe diameters of 6" or larger; fits MT-648 can.
Swab
Can with neck is available in gallon (with 27/8" neck), quarts (with 27/8"neck or paint style neck) and pint (13/4" neck).
Can with Neck
Size ml (U.S.) Product Code Units per Case473 (pt) 074423 100
946 (qt) 074419 50
946 (qt) 074424 50
3785 (gal) 074425 20
Size mm (U.S.) Product Code Units per Case100 (4) 074456 24
3020 roller for pipe diameters from 3" through 6"; fits MT-653 emptyquart can.
7020 roller for pipe diameters of 6" or larger; fits MT-648 can.
Roll-A-Weld Roller
Size mm (U.S.) Product Code Units per Case75 (3) 074426 24
180 (7) 074427 20
16
AP
PLI
CAT
OR
S&
AC
CE
SSO
RIE
S
Pipe Diameter Pipe Diameter Average Primer Average Cement Joints per quart Joints per quart
mm inches
122025405075
100150200250300400450
1/23/41
11/223468
10121618
60040025018012080602010
4 - 62 - 41 1/21
30020012590604030105
2-31-2
3/41/2
Average Number of Joints per 946 ml (1 quart) ofIPEX Cement and Primer*
* These figures are estimates based on laboratory tests. Due to the manyvariables in the field, these figures should be used as a general guide only.
Size ml (U.S.) Product Code Units per Case500 (pt) 074728 12
Empty Applican
Applicators and Accessories
Installation Tools from IPEX
The IPEXSolvent Cementing Guide
Contact your IPEX representative for more informationand to order your copy of the installation guide.
Ask your IPEXrepresentative to view ourcement installationpresentation
Installation Guide: Solvent Cements 3
PVC, CPVC AND ABS PIPE & FITTINGS
Solvent Cementing Guide
I P E X C E M E N T , P R I M E R S & A P P L I C A T O R S
WARRANTY: All IPEX products are guaranteed against defects resulting from faultyworkmanship or materials. If any such product is found to be defective by reason of faultyworkmanship or materials, upon written notice and return of the product, the defectiveproduct will be replaced by IPEX free of charge, including shipping charges for thereplacement product. Claims for labor costs and other expenses required to replace suchdefective product or to repair any damage resulting from the use thereof will not be allowedby IPEX. Our liability is limited to the price paid for the defective product. IPEX will not bebound by any warranty, other than above set forth, unless such warranty is in writing.
This literature is published in good faith and is believed to be reliable. However IPEX doesnot represent and/or warrant in any manner the information and suggestions contained inthis brochure. Data presented is the result of laboratory tests and field experience.
IPEX maintains a policy of ongoing product improvement. This may result in modificationsof features and/or specifications without notice.
SALES AND CUSTOMER SERVICE
Toll Free 1-866-473-9462 (IPEXINC)
www.ipexinc.com
About IPEX
IPEX is a leading supplier of thermoplastic piping systems. We provide our
customers with one of the world’s largest and most comprehensive product
lines. All IPEX products are backed by over 50 years of experience. With
state-of-the-art manufacturing facilities and distribution centers across
North America, the IPEX name is synonymous with quality and performance.
Our products and systems have been designed for a broad range of customers
and markets. Contact us for information on:
• PVC, CPVC, PEX, PP, ABS and PE pipe and fittings (1/4" to 48")
• Plumbing and mechanical pipe systems
• Industrial process piping systems
• Electrical systems
• Municipal pressure and gravity piping systems
• Telecommunications and utility piping systems
• Irrigation systems
• Radiant heating systems
VancouverTel (604) 534-8631Fax (604) 534-7616
CalgaryTel (403) 236-8333Fax (403) 279-8443
EdmontonTel (780) 415-5300Fax (780) 415-5358
SaskatoonTel (306) 933-4664Fax (306) 934-2020
WinnipegTel (204) 633-3111Fax (204) 633-3075
TorontoTel (905) 670-7676Fax (905) 670-5295
MontrealTel (514) 337-2624Fax (514) 337-7886
Saint JohnTel (506) 633-7473 (PIPE)Fax (506) 633-8720
St. John’sTel (709) 747-7473 (PIPE)Fax (709) 368-9111
BRINNAIP030102© 2003 IPEX IND004C