iPad & Tablet Teleprompter Kit

Model: FOR-TP2

Instruction Manual

Required screws and nuts

x2 Camera height adjustment riser blocks

Custom fit Flight CaseAdjustable tablet bracket

(Style may differ)

Teleprompter glass frame and platform

Premium 60/40 HD Beam Splitter GlassCloth lens cover hood with Velcro

Contents

x2

BA

H

I G

C

N M

KJ L

E

Slide the reflective glass into top of frame (C). Ensure the side with the sticker faces yourself and the other side faces the camera.

Fix the Tablet Bracket (A) to platform (B) using screw (I).

Fix the Glass Frame (C) to platform (B) using 2 screws (H).

Use Allen key (M) to screw in screws (N), to prevent glass from falling out of frame.

Attach your Camera to frame (B) using screw (J).

You may need to use the Riser Blocks (E) to raise your camera so the camera lens centres the Glass Frame.

If you are using a single riser block, use screw (K). If you are using two riser blocks, use screw (L)

1.

2.

4.

5.

3.

Assembly instructions

Attaching to a tripod

This teleprompter kit can be used with a camera tripod. Your tripod should have a ‘quick release plate’ from which you must remove the screw that usually attaches the quick release plate to a camera.

Use the supplied screw set (G) in place of the removed screw to attached to the Teleprompter frame as shown above. The wing-nut and washer should be on the Teleprompter frame, the rest of the screw set should feed through the quick release plate.

Known issues with quick release plates:

- Some quick release plates hold the screw in place using clip. You will need to remove the clip to release the screw (in some cases the clip is covered by a rubber pad).

G

Quick release plate

Your Tablet

This Teleprompter Kit will work with the below tablets.

Tablets measuring; 115mm - 210mm wide.

Your Camera

The distance between your cameras tripod screw mounting hole and the front of your camera (including lens) should be less than 20cm.

(Not suitable for large broadcast/ENG cameras)

Copyright Forest-AV.com and Silent Media Ltd. All rights reserved.

Compatibility

Glass care

App Download

Glass should be carefully cleaned using warm soapy water and a microfibre or cotton cloth. You can also use Isopropyl alcohol (rubbing alcohol).

Important: Do not use standard glass cleaning products or abrasive materials such as paper towels to clean the glass, they could permanently damage the reflective coating on the glass

Your tablet will need an App to scroll script. If you do not already have one Search for ‘Teleprompter’ in your App store where you can find free and paid versions.