IP-CONTROL TABLE OF CONTENT INDEX 1.Product presentation 1.OverviewOverview 2.Start-up 1. Start-up...
-
Upload
willa-beasley -
Category
Documents
-
view
220 -
download
0
Transcript of IP-CONTROL TABLE OF CONTENT INDEX 1.Product presentation 1.OverviewOverview 2.Start-up 1. Start-up...
IP-CONTROL TABLE OF CONTENT
INDEX
1. Product presentation1. Overview
2. Start-up1. Start-up
3. Editors1. Visualisationeditor
2. Jobeditor
3. Systemtool
4. Application1. Visualisation
2. Create a project
3. Create a switch function
4. Create a camera function
5. Multiroomcontrol with IP-Control
6. IP-Control Mobile devices
7. Create a Master page
8. Create a Embedded Flip page
BERKER TRAINING IP-CONTROL RELEASE 5 107.2012
INDEX
5. Tips&Tools1. Network configuration
2. Update-Tool
3. ETS 4 Application
4. Group address import and export
IP-CONTROL
PRODUCT PRESENTATIONSTART-UPEDITORSAPPLICATIONTIPS & TOOLS
07.2012 3BERKER TRAINING IP-CONTROL RELEASE 5
IP-CONTROL OVERVIEW
Product: IP-CONTROL
Ordernumber:7571 00 04
BERKER TRAINING IP-CONTROL RELEASE 5 407.2012
IP-CONTROL OVERVIEW
FUNCTION OVERVIEW
Visualisation (50 different Users, maximum of 15 Users at the same time)
NEW: KNX Net-IP Access (KNX ETS commissioning over IP)
System connection over IP (Function similar a KNX-line coupler) Visualisation of network cameras
BERKER TRAINING IP-CONTROL RELEASE 5 507.2012
IP-CONTROL OVERVIEW
FUNCTION OVERVIEW
Automation-Jobs: Logic gates, switch on-off delay time,
staircase light function, multiplexer, comparator, math functions
Weekly timer, Yearly timer Date & time transmitter E-Mail function Scene function Hysteresis and threshold switches
The number of logic and automation jobs is not absolutely limited. Recomment not more than 200 jobs for optimal working.
BERKER TRAINING IP-CONTROL RELEASE 5 607.2012
IP-CONTROL OVERVIEW
FUNCTION OVERVIEW
Automation-Jobs: Job to control multiroom audio devices
(Logitech Squeezebox)
Independent visualisation for mobile
devices
BERKER TRAINING IP-CONTROL RELEASE 5 707.2012
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 8
IP-CONTROL OVERVIEW
IP-CONTROL NEW FIRMWARE VERSION 1.5 (R05)
New type of visualisation for tablets (e.g. iPad or Android Tablets)
Existing visualisation on IP-Control Java based visualisation in normal browser–
The “classic” IP-Control visualisation HTML based visualisation for mobile devices (IP-Control Mobile) since
Release 03
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 9
IP-CONTROL OVERVIEW
IP-CONTROL SINCE VERSION 1.4 (LATEST VERSION 1.5)
NEW: IP-CONTROL-TABLETSpecial visualisation for mobile devices with high resolution display and HTML / AJAX technoligy (e.g. iPad, Android Tablets)
IP-Control Tablet provides the possibility to take over the “normal” visualisation from IP-ControlRestriction:
Free components are not supported by IP-Control Tablet , only elements of the standard library are supported
Selectable at startup page
PRODUCT PRESENTATIONSTART-UPEDITORSAPPLICATIONTIPS & TOOLS
07.2012 10BERKER TRAINING IP-CONTROL RELEASE 5
REQUIREMENTS OF IP-CONTROL
Network connection (network cable or network components (e.g. Switch))
KNX bus voltage
10 - 30 V DC external power supply
BERKER TRAINING IP-CONTROL RELEASE 5 11
IP-CONTROL START-UP
07.2012
IP-CONTROL START-UP
non ETS application (Visualisiation and programming on browser)
Status LED‘s Power - LED (Operating status)
BMX - LED (IP-Control kernel-mode)
KNX - LED (KNX bus)
Without function
LAN - LED (LAN activity)
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 12
IP-CONTROL START-UP
REQUIREMENTS OF IP-CONTROL
Current webbrowser (e.g. Internet Explorer, Firefox, Netzcape etc.)
JAVA Runtime Engine Version 1.6 or higher
(Download http://www.java.com Oracle)
BERKER TRAINING IP-CONTROL RELEASE 5 1307.2012
IP-CONTROL START-UP
VERSION CHECK JAVA
the JAVA-Icon could be found on system control of Windows
Application info provides the version number (e.g. 1.6.23)
BERKER TRAINING IP-CONTROL RELEASE 5 1407.2012
IP-CONTROL START-UP
SETTINGS ON JAVA
On tab „General“ – Temporarily Internet-Files click on „Settings“
Remove the mark „keep temporary files on my computer“
BERKER TRAINING IP-CONTROL RELEASE 5 1507.2012
CALL UP THE IP-CONTROL IN BROWSER
Call up the „Start page“ of the IP-Control with device IP-address
IP-CONTROL START-UP
BERKER TRAINING IP-CONTROL RELEASE 5 1607.2012
Type in IP-adress of IP-Control (e.g.: http://192.168.1.10)
IP-CONTROL START-UP
ERROR MESSAGE ON CALL UP THE „START PAGE“
Please check Correct IP-address (e.g: http://192.168.1.10)
Connection to network
IP-address of your computer is in the correct ip-address range
BERKER TRAINING IP-CONTROL RELEASE 5 1707.2012
IP-CONTROL START-UP
VALIDATION OF IP-SETTINGS
To check the ip-settings please use Discovery Tool Discovery Tool located on IP Control CD
Discovery Tool is a Java tool and directly executable (no need of installation)
BERKER TRAINING IP-CONTROL RELEASE 5 1807.2012
IP-CONTROL START-UP
VALIDATION OF IP-SETTINGS
Discovery Tool
BERKER TRAINING IP-CONTROL RELEASE 5 19
Available IP-Controls green = available yellow = other network segment
IP address of the IP-Control
Open browser with IP-Control start page
07.2012
CALL UP IP-CONTROL IN BROWSER
Call up the „Start page“ using the ip-address of the device
IP-CONTROL START-UP
BERKER TRAINING IP-CONTROL RELEASE 5 20
IP-adress of IP-Control (http://192.168.1.10)
07.2012
IP-CONTROL START-UP
POSSIBLE SECURITY WARNINGS OF OPERATING SYSTEM
Security warning of operation system on first call up
Choose „Run“ or „Don`t block again“
BERKER TRAINING IP-CONTROL RELEASE 5 2107.2012
IP-CONTROL START-UP
STARTING THE VISUALISATION EDITOR
Choose the button „Editor“ and you will get the user authentication box
BERKER TRAINING IP-CONTROL RELEASE 5 22
Username: admin*Password: berker*
07.2012
* delivery default settings
IP-CONTROL START-UP
VISUALISATION EDITOR
Editor is started and visualisation can be arranged
BERKER TRAINING IP-CONTROL RELEASE 5 2307.2012
PRODUCTPRESENTATIONSTART-UPEDITORSAPPLICATIONTIPS & TOOLS
07.2012 24BERKER TRAINING IP-CONTROL RELEASE 5
IP-CONTROL EDITORS
CHOOSING THE FUNCTION
3 different choices are available Visualisierung = starting the existing visualisation Editor = changing existing / creating new visualisations System = changing the system settings
BERKER TRAINING IP-CONTROL RELEASE 5 2507.2012
VISUALISATION EDITOR
IP-CONTROL EDITORS
VISUALISATION EDITOR
The design and functions of the visualisation will be configured on editor
Configuration of the project by using the existing menu bar and visualisation elements
Setttings of background images, images and page sizes
Setup user management
Import of group adresses and images
General settings such as for e.g. IP-Control clock and display of KNX group addresses
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 27
IP-CONTROL EDITORS
VISUALISATION EDITOR
Range of functions compared to previous version
Backup-dialog on end of task Visu Live Mode possible on editor Image database included on editor (image
import via drag & drop or image-transfer) Import of group addresses included on editor Free allocation of working surface
(simular to ETS4) Supporting new visualisation variants (mobile
devices)
BERKER TRAINING IP-CONTROL RELEASE 5 2807.2012
IP-CONTROL EDITORS
VISUALISATION EDITOR
Multi-part view for effective work
BERKER TRAINING IP-CONTROL RELEASE 5 2907.2012
VISUALISATION EDITOR
General functions like e.g. Save – New page – New project
IP-CONTROL EDITORS
BERKER TRAINING IP-CONTROL RELEASE 5 3007.2012
General functions
IP-CONTROL EDITORS
VISUALISATION EDITOR
Structure of projects such as e.g. project compilation – pages – master pages
BERKER TRAINING IP-CONTROL RELEASE 5 3107.2012
Project struktur
IP-CONTROL EDITORS
VISUALISATION EDITOR
Elements for functions such as e.g. Switching – dimming – value display
BERKER TRAINING IP-CONTROL RELEASE 5 3207.2012
elements
IP-CONTROL EDITORS
VISUALISATION EDITOR
Configuration of active page e.g. Size – background - colour
BERKER TRAINING IP-CONTROL RELEASE 5 3307.2012
Parameters
IP-CONTROL EDITORS
The visualisation editor contains elements for following functions switch, push and release function
binary status
dim, blind control
value transmitter, value display
temperature indication and – adjustment
text display
time and date displays
camera integration
fault message
diagram
RSS feeds
…
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 34
IP-CONTROL EDITORS
VISUALISATION EDITOR-IMAGEPOOL
To use images in IP-Control , they have to be imported first
To import images use menu „Extras – image transfer“
BERKER TRAINING IP-CONTROL RELEASE 5 3507.2012
IP-CONTROL EDITORS
VISUALISATION EDITOR – IMAGE POOL
Upload images
BERKER TRAINING IP-CONTROL RELEASE 5 3607.2012
Choose image file
IP-CONTROL EDITORS
VISUALISATION EDITOR – IMAGE POOL
Upload images
BERKER TRAINING IP-CONTROL RELEASE 5 3707.2012
Select button to upload the image
JOB EDITOR
IP-CONTROL EDITORS
JOB EDITOR
The Job editor provides you with services (jobs)
Services are created and parameterized
Jobs are tasks performed by the IP-Control
Jobs are e.g. Logic gates Light scenes Date and time elements Week timer Media control etc.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 39
IP-CONTROL EDITORS
JOB EDITOR
Start
BERKER TRAINING IP-CONTROL RELEASE 5 4007.2012
Start Job editor
IP-CONTROL EDITORS
JOB EDITOR
Overview
BERKER TRAINING IP-CONTROL RELEASE 5 4107.2012
Job-Editor starten
SYSTEM TOOL
IP-CONTROL EDITORS
SYSTEM TOOL
Call up System tool
BERKER TRAINING IP-CONTROL RELEASE 5 4307.2012
IP-CONTROL EDITORS
SETTINGS SYSTEM TOOL
Fill in IP-Control string or charcter string (e.g. Aag6F4)
Character string is located on manual and on back of the device
BERKER TRAINING IP-CONTROL RELEASE 5 4407.2012
IP-CONTROL EDITORS
SETTINGS SYSTEM TOOL
Several possibilities of settings User administration Configuration Start page Backup / restore
BERKER TRAINING IP-CONTROL RELEASE 5 4507.2012
IP-CONTROL EDITORS
SETTINGS SYSTEM TOOL
Configuration Setup network
■ IP address 192.168.1.10
■ Subnetmask.
255.255.255.0■ Default gateway for
connection to internet■ DNS Server normally the
same as default gateway■ Time server configuration to
synchronize with internet time server (Net Time Protocol)
BERKER TRAINING IP-CONTROL RELEASE 5 4607.2012
sample of settings
IP-CONTROL EDITORS
SETTINGS SYSTEM TOOL
Configuration Set up the name
„IP-Control building 1“ Set up the physical address
■ Phy. address 1.1.50
BERKER TRAINING IP-CONTROL RELEASE 5 4707.2012
sample of settings
PRODUCTPRESENTATIONSTART-UPEDITORSAPPLICATIONTIPS & TOOLS
07.2012 48BERKER TRAINING IP-CONTROL RELEASE 5
VISUALISATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 50
IP-CONTROLAPPLICATION
START THE VISUALISATION
IP-CONTROLAPPLICATION
START THE VISUALISATION
Visu Window Visualisation starts in seperate
browser window
Visu Browser Visualisation starts in actual
browser window
IP-Control Tablet New surface optimized for tablet-
PC‘s or smartphones
IP-Control Mobile Universal surface for several
devices with different operating systems
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 51
IP-CONTROLAPPLICATION
START THE VISUALISATION
Visu Window Visualisation starts in seperate
browser window
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 52
IP-CONTROLAPPLICATION
START THE VISUALISATION
Visu Browser Visualisation starts in actual
browser window
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 53
IP-CONTROLAPPLICATION
START THE VISUALISATION
IP-Control Tablet New surface optimized for tablet-
PC‘s or smartphones
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 54
IP-CONTROLAPPLICATION
START THE VISUALISATION
IP-Control Mobile Universell surface for several
devices with different operating systems
Predefined functions with default symbols
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 55
CREATE A PROJECT
CREATE A PROJECT
1st step : Creating a new project
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 57
Enter name of project
CREATE A NEW PAGE
2nd step : Create a new page
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 58
Enter name of page
CREATE A SWITCH FUNCTION
CREATE A SWITCH FUNCTION
1st step : Creat a switch function
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 60
Symbol of switch function
CREATE A SWITCH FUNCTION
2nd step : Creat a switch function
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 61
Configuration part of element:Possibility of positioning the object and connecting the output to a group address
Icon of switch function
CREATE A SWITCH FUNCTION
3rd step : Connect to group address
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 62
To select group address double click the line
IP-CONTROL APPLICATION
CREATE A SWITCH FUNCTION
4th step : Connect to group address
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 63
Confirm
CREATE A SWITCH FUNCTION
5th step : Connect to group address /check
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 64
Combined group address
CREATE A SWITCH FUNCTION
6th step : Test the function in live mode
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 65
Start live modus
IP-CONTROL APPLICATION
CREATE A SWITCH FUNCTION
7th step : Test the function in live modus
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 66
CREATE A SWITCH FUNCTION
7th step : Test the function in live mode
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 67
CREATE A CAMERA FUNCTION
CREATE A CAMERA FUNCTION
1st step : Insert camera function
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 69
Insert Camera
CREATE A CAMERA FUNCTION
2nd step : Configure URL of camera
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 70
2 options of using network cameras1st variante MJPEG STREAM2nd variante static image
In the URL field, enter the full network path to the image memory of the camera, preceded by HTTP:// (e.g. HTTP://192.168.1.2/record/current.jpg)
CREATE A CAMERA FUNCTION
3rd step : Enter description of camera
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 71
Description of camera(name)
CREATE A CAMERA FUNCTION
4th step: Configure password
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 72
If necessary, enter user and password
CREATE A CAMERA FUNCTION
5th step : Test the function in live mode
IP-CONTROL ANWENDUNGEN
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 73
Start live modus
IP-CONTROL APPLICATION
CREATE A CAMERA FUNCTION
6th step : Test the function in live mode
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 74
IP-CONTROL APPLICATION
CREATE A CAMERA FUNCTION
7th step : Test the function in live mode
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 75
CREATE A MASTER PAGE
IP-CONTROL APPLICATION
CREATE A MASTER PAGE
By using Master pages recurrent pages can be added automatically
Possible to define more Master pages
E.g. design, function and textparts could be defined
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 77
IP-CONTROL APPLICATION
CREATE A MASTER PAGE
A new master page will be inserted in the structure of the project
The new Master page can be configured
Name of page could be changed Design could be changed
■ Background colour / background image
■ Functions
01.2012 BERKER SCHULUNG IP-CONTROL RELEASE 5 78
IP-CONTROL APPLICATION
CREATE A MASTER PAGE
Inside configuration of normal page select the Master page
All parameters of the Master page will be integrated on this page
01.2012 BERKER SCHULUNG IP-CONTROL RELEASE 5 79
CREATE AN EMBEDDED FLIP PAGE
CREATE A FLIP PAGE
Flip pages are embeded Pages with scroll function ( flipping) on a page (like frames on websites)
More functions could be placed onto a sub area
It`s possible to create multible flip pages
e.g. Navigation, control functions and text areas could be defined
IP-CONTROL APPLICATION
01.2012 BERKER SCHULUNG IP-CONTROL RELEASE 5 81
IP-CONTROL APPLICATION
CREATE A FLIP PAGE
A new Flip page will be inserted in the structure of the project
The new Flip page can be configured
Name of page could be changed Design could be changed
■ Background colour / background image
■ Functions
01.2012 BERKER SCHULUNG IP-CONTROL RELEASE 5 82
IP-CONTROL APPLICATION
CREATE A FLIP PAGE
Setup the size of Flip page
Setup number of segments
Setup the start segment
01.2012 BERKER SCHULUNG IP-CONTROL RELEASE 5 83
IP-CONTROL APPLICATION
INTEGREATE A FLIP PAGE
Embedded on page
Setup number of segments
Setup the start segment
01.2012 BERKER SCHULUNG IP-CONTROL RELEASE 5 84
MULTIROOM CONTROL WITHIP-CONTROL
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 86
IP-CONTROL APPLICATION
Classical music media like CD are increasingly substituted by MP3 files
Internet music stores and possibilities to readout CDs are used to build up central MP3 collections on servers
Manufacturers of consumer electronics offer streaming-clients, which reproduce the centrally stored music optionally in different rooms
Normally the user handles the devices through special user interfaces, which belong to the electronics
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 87
IP-CONTROL APPLICATION
Berker has developed a special solution for multiroom audio control based on IP-Control and Logitech Squeeze Boxes
This solution provides an easy way to realise a smart multiroom environment
IP-Control is the interface between the KNX devices and the multiroom electronics
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 88
IP-CONTROL APPLICATION
IP-Control is the interface between the KNX devices and the multiroom electronics
Zone 1 Zone 2
KNX
IP
IP
MP3collection
InternetRadio
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 89
IP-CONTROL APPLICATION
Squeezeboxes are streaming clients for MP3 files located on the SqueezeServer or for internet radio stations.
SqeezeServer manages the MP3 files and internet radio stations in playlists.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 90
IP-CONTROL APPLICATION
Essential components for this solution: PC for the SqueezeServer software IP-Control R2 or higher Logitech Squeezebox per each zone Optional a B.IQ RTR per zone or another multifunctional KNX switch Optional a Master Control for the central handling or a PC for the IP-
Control visualisation For the SqueezeServer you need:
■ A plugin, which is located on the IP-Control CD or is available on the internet at Berker download area
■ Further you need a xPL hub software, which is freely available on the internet
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 91
IP-CONTROL APPLICATION
optional
IP-CONTROL APPLICATION
The job Squeezebox-Control (SBC) of the IP-Control provides a KNX interface for the control of Squeezeboxes. With this job KNX-devices can control Squeezeboxes with following functions:
Zone on/off, mute on/off (pause/play)
Volume control with feedback of the current volume as EIS 15 (14 bytes) ASCII text and EIS 6 (1 byte) value, e.g. „Volume 45%“ in the text display of the B.IQ RTR or as bargraph in the MC or the visualisation
Selection of playlists or titles
Display of playlist names and track names as ASCII text
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 92
IP-CONTROL APPLICATION
With this job KNX-devices can control Squeezeboxes with following functions:
Display of additional track information like artist or album name as text in the MC or the visualisation
Display of a 4-row, scrollable view of all playlists for the directed selection of a playlist in the MC or visualisation by name
Adjustment of limitations for the volume in each zone by the visualisation or the MC
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 93
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 94
EXAMPLE FOR AN USER INTERFACE
IP-CONTROL APPLICATION
Zone on/off (toggle)
Quieter (darker)
Playlist/Track (long/short) Playlist/Track (long/short)
Louder (brighter)
Mute on/off (toggle)
14 Byte ASCII Text
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 95
IP-CONTROL APPLICATION
Job Name: Required entry
Gate Group Adresses: If a group address is connected, the job is only active by an "1” (1bit group adress)
SB name: The name of the squeezebox which is to be controlled (The entry must be on par with the squeezebox server entry for this squeezebox)
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 96
IP-CONTROL APPLICATION
Absolute limit of maximum volume of the squeezebox in % (default 100)
Absolute limit of minimal volume of the squeezebox in % (default 0)
Gradual dimming of the volume specified step width (default 2)
Output of the current volume to display
Output of the current volume to display
Setting volume per value (1byte)
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 97
IP-CONTROL APPLICATION
Switch on / off the zone (squeezebox)
Play / Pause track
Track next / previous
Forward / rewind (search in track, High Speed)
Seek width (speed….)
Playlist next / previous
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 98
IP-CONTROL APPLICATION
Diplay message Output: Object to transmit text information on
a single-line display (rotating display)
Text bypass input: Object to fade in of further texts from
an external source of the KNX, e.g. Alarms (s.a. B. IQ info text)
Reset textdisplay: Object to reset the alarm line of text
in the B.IQ displays. When squeezebox turned off, the alarm function of the B. IQ display will be reset and the normal content of the display is again represented.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 99
IP-CONTROL APPLICATION
Reset invert: Setting this flag the reset of the
textdisplay will be inverted
Reset on Zone: Setting this flag will reset the text
display when squeezebox is switched off
Reset on mute: Setting this flag will reset the text
display when squeezebox is muted
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 100
IP-CONTROL APPLICATION
Display „No Playlist“: When marked it will show „No
Playlist“ if there is no playlist defined
Display „No Title“: When marked it will show „No Title“
if there is no title defined
Time x: Time in seconds after the display set
back to the default display
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 101
IP-CONTROL APPLICATION
Object for text output of current playlist
Object for text output of the line x in the playlist selection
Object for text output of current title
Object for text output of current album
Object for text output of current artist
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 102
IP-CONTROL APPLICATION
Object to control the previous or next page in the playlist selection (next = 1, the next / previous 4 playlist names will be displayed)
Object to select the playlist from the playlist selection (values 0-3 for the selection of lines 1-4)
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 103
IP-CONTROL APPLICATION
Command code : with one group address all the functions can be triggered by value (1 byte)
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 104
IP-CONTROL APPLICATION
EXAMPLE FOR A PAGE
act. artist
act. title
act. album
Playlist
Playlist
Playlist
Playlist
Volume limit
25 50 75
75 %
ZONE
Act. Info
25 50 75
IP-CONTROLMOBILE DEVICES
IP-CONTROL APPLICATION
IP-CONTROL MOBILE DEVICES
Functions: Direct access to the IP-Control No additional devices are necessary Integrated „user interface for mobile devices“ License cost free Smart phones
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 106
KNX
IP
IP-CONTROL APPLICATION
Controlling a KNX – System via mobile devices:
Operation with:Smart phone
Mobile phone
PDA
Functions e.g. switching, dimming and shutter control
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 107
IP
OPERATION OF A LIGHT
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 108
IP-CONTROL APPLICATION
OPERATION OF A SHUTTER
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 109
IP-CONTROL APPLICATION
ADJUSTMENT OF THE SETPOINT TEMPERATURE
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 110
IP-CONTROL APPLICATION
MULTIMEDIA CONTROL
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 111
Zone 1
KNX
IP
IP
MP3Sammlung
InternetRadio
WLAN
IP
IP-CONTROL APPLICATION
The IP-Control mobile devices surface is to be used with a mobile browser:
http://192.168.1.10/ipcm Default user: ipcm Default password: (no
password )
Passwords can be setup in Editor Security Settings:
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 112
Security Settings
IP-CONTROL APPLICATION
SECURITY SETTINGS
Passwords can be setup in Editor Security Settings:
1.Mark Checkbox : User
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 113
1.
IP-CONTROL APPLICATION
SECURITY SETTINGS
2. Click New User
3. Insert a unique username
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 114
2.
3.
IP-CONTROL APPLICATION
SECURITY SETTINGS
4. Setup Pasword
5. Mark Checkbox IP-Control Mobile
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 115
5.
4.
IP-CONTROL APPLICATION
The visualisation is optimized for mobile devices
Visualisation looks similar on smart phone, PDA or mobile phone
Size of the visualisation depends on the resolution of the screen
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 116
IP-CONTROL APPLICATION
Operation is performed by using pointer or touchscreen operation
E.g.: Operation on groundfloor changes the visualisation to the surface of the floor:
Livingroom Kitchen Workroom Restroom
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 117
IP-CONTROL APPLICATION
Next step shows the visualisation livingroom
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 118
IP-CONTROL APPLICATION
Operation of the corresponding lamp with colored status feedback
Status O = Off Status I = On
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 119
IP-CONTROL APPLICATION
Example to adjust the setpoint temperature in a room with current temperature
Current temperature Setpoint temperature Change the temperature = Setpoint (
+ , - )
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 120
IP-CONTROL APPLICATION
Structure of the operation:Step 1 Groundfloor
Step 2 Livingroom
Step 3 Livingroom Light Ceiling
Step 4 Funktion ( ON / OFF)
Structure is adjusted on IP-Control
Important: Only one project „IP-Control mobile devices“ can be defined on IP-Control!
07.2012 121BERKER TRAINING IP-CONTROL RELEASE 5
IP-CONTROL APPLICATION
After first function test, you can create a bookmark on the home screen of iPhone or iPod.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 122
IP-CONTROL APPLICATION
START IP-CONTROL MOBILE EDITOR
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 123
Start the editor
EDITOR - GENERAL
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 124
Insert and settings via right mouse click.
EDITOR - GENERAL
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 125
Insert new elements
Save Changes
Reload the Editor
EDITOR – ADD NEW BUILDING PARTS
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 126
Add new folder to create a new part of the building
IP-CONTROL APPLICATION
EDITOR – ADD FUNCTION „SWITCH“
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 127
Add switch function
IP-CONTROL APPLICATION
EDITOR – ADD FUNCTION „SWITCH“
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 128
connect to group address
Enter the description
MORE FEATURES
IP-CONTROL APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 129
More Features e.g.: Camera Temperature Value Shutter List (Playlist) Dyn. Playlist MediaControl
PRODUCTPRESENTATIONSTART-UPEDITORSAPPLICATIONTIPS & TOOLS
07.2012 130BERKER TRAINING IP-CONTROL RELEASE 5
NETWORK CONFIGURATION
IP-CONTROL TIPS & TOOLS
NETWORK CONFIGURATION
Settings for IP address of PC
Start – Settings – Control panel
Select network connections
LAN – Select connection with double click
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 132
IP-CONTROL TIPS & TOOLS
NETWORK CONFIGURATION
Select button „Properties“
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 133
IP-CONTROL TIPS & TOOLS
NETWORK CONFIGURATION
Select Internet Protocol (TCP/IP)
Click Properties
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 134
IP-CONTROL TIPS & TOOLS
NETWORK CONFIGURATION
Select "Use following IP address"
Enter IP address 192.168.1.2
Subnet mask 255.255.255.0
Default gateway is not required for local commissioning
Confirm settings with OK
Note: These are examples, other addresses and address ranges are possible in practice!
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 135
UPDATE-TOOL
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 137
IP-CONTROL TIPS & TOOLS
UPDATE-TOOL
Advantages for customers: Update-package online avaible The update can be applied on-site without the necessity of sending in Short reaction time to do an update The update-tool is self-descriptive
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 138
IP-CONTROL TIPS & TOOLS
UPDATE-PACKAGE AND NEW FIRMWARE IP-CONTROL 1.4 (R4)
ONLY FOR IP-CONROL OLDER THAN R4
The update-package contains following parts: Update-Tool Firmware R04 Documentation R04
Since WK3 2011 IP-Control will be delivered with firmware 1.4 (R04)
The update-package is available in download area
IP-CONTROL TIPS & TOOLS
FIRMWARE UPDATE
Using the IP-Control update tool, it is possible to flash a new firmware into the devive.
The update tool itselfs is a Java based programm, and works on several operating systems.
During this procedure, it is extremely important to read and observe the following information carefully
If the update procedure fails, IP Control might have to be returned to the manufacturer.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 139
IP-CONTROL TIPS & TOOLS
FIRMWARE UPDATE
IPC_UpdateTool: The Update Tool starts on clicking the .exe-file. There is no need of
installation.
fw_ipc-1.4.0 (R04): Choose firmware for IP-Control, Release 4 (updated 01-2011) to do an
update
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 140
IP-CONTROL TIPS & TOOLS
IMPORTANT MEASURES:
First create a current backup of your project
IP Control is reset to the factory settings by an update, the project data are therefore lost.
Please note: the passwords of the visualisation users are not copied during recovery.
Please note that you can reenter these after the update procedure and project recovery.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 141
IP-CONTROL TIPS & TOOLS
IMPORTANT MEASURES:
For an update you need the Update Tool and the desired firmware image. This is delivered as a zip file together with a checksum file in order to check the correct transfer and avoid any errors. Both of these can be downloaded in the download area at http://www.berker.de. Both files have to be unzipped in a directory.
We strongly recommend that you carry out the firmware update only within sight of the IP Control. IP Control reproduces a status feedback via its five LEDs during the update procedure. A firmware update via one or more networks is not possible, they must be in the same physical and logical network as the IP Control.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 142
IP-CONTROL TIPS & TOOLS
IMPORTANT MEASURES:
If you operate your IP Control with DHCP, you should switch this off and assign IP Control a fixed IP address.
For the update you need the IP Control string and password of the user "admin".
During the firmware update, IP Control is reset to the factory settings, i.e. it retains its old IP address xxx.xxx.xxx.xxx but has been overwritten with the password "berker".
The entire update procedure lasts approximately 15 min.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 143
IP-CONTROL TIPS & TOOLS
PROCEDURE
If all the necessary measures have been made, please proceed as follows:
Switch off all security software and/or firewall for the update procedure since this might disturb the communication. (The communication takes place on the UDP port 1735).
Make sure of not using any other network connections during the disabling of security software and/or firewall.
Don`t forget to reactivate the security software and/or firewall after finishing the update procedure
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 144
IP-CONTROL TIPS & TOOLS
PROCEDURE
Creating backup If you have not already done so, make a backup of the current project.
Opening update tool Open the update tool. All relevant information and tips are summarised in
the help text of the update tool.
Selecting IP Control Select the desired IP Control in the left column and enter the IP Control
string and admin password on the right.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 145
IP-CONTROL TIPS & TOOLS
PROCEDURE
Select the desired IP Control in the left column and enter the IP Control string and admin password on the right. If the device is in the same network, the text has a green background, if it is not in the same network, it has a yellow background. Below the display is a display of the necessary IP Control parameters. Experienced IP Control users will know this from the Discovery Tool.
If several IP Control are installed, the IP Control can be identified visually by means of the "LED Test".
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 146
IP-CONTROL TIPS & TOOLS
PROCEDURE
In the status window below, you will be shown which actions are being executed. If the IP Control system is already installed with a rescue system, it will be restarted with this. If the device has not yet been equipped with the system, this step will first be executed.
The selected device first appears in the list of the IP Control with a blue background. If the rescue mode is active, it appears there with a green background and with a red cross. On the device itself, the power LED lights up orange at this moment, the LAN LED flashes depending on the network traffic and the BMX LED flashes red.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 147
IP-CONTROL TIPS & TOOLS
PROCEDURE
Selecting firmware file If the IP Control is in rescue mode, the view in the Update Tool changes
and the request to select the correct firmware file appears on the right. When opening the image file, the Update Tool checks whether the
firmware image was transferred correctly during download by means of the md5-checksum included.
The update procedure can now be started by pressing the button "Start IP Control Update". After the firmware file is loaded into the device, the IP Control is busy checking the file for approx. 5 min. Now the BMX and EIB LED flash red simultaneously.
After successful checking, the installation begins. This procedure takes approx. 5 minutes again. During this time, the three middle LEDs flash red.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 148
IP-CONTROL TIPS & TOOLS
PROCEDURE
IP Control should not be disconnected from the power supply under any circumstances during the entire procedure. This can cause irreparable damage to the software, the device must be returned.
Factory settings If the firmware is installed, the IP Control restarts. Afterwards, it is in the
network with the factory settings. It therefore has the IP address assigned by you xxx.xxx.xxx.xxx but the password for the user "admin" is now "berker".
Recovering backup file Load your current backup into the device. All the settings are recovered,
and the device restarts. Afterwards, it is available with all known settings but new firmware.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 149
IP-CONTROL TIPS & TOOLS
PROCEDURE
Please note that the backup file does not contain any information about the IP address settings. During the backup, only the port settings are saved but not the IP address settings (except for NTP timeserver)!
Recovering user administration
The user passwords must be reentered so that the user login on the Visualisation works perfectly again. Afterwards, the project must be saved once again.
During the recovery of your project file, please bear in mind that no projects from newer firmware versions may be loaded into older versions.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 150
ETS 4 APPLICATION
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 152
IP-CONTROL TIPS & TOOLS
IP-CONTROL AND ETS 4
There is no ETS application for the IP control, and this means that it cannot be inserted directly into the ETS project.
Insert a dummy device into the project to ensure that the physical address is reserved and so that filter tables can be correctly generated.
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 153
IP-CONTROL TIPS & TOOLS
IP-CONTROL AND ETS 4
All group addresses must be connected to the dummy application
Important: Have a look to the data types (e.g. switch = 1 Bit)
ETS 4 automatic generates the filter tables (Couplers should be programmed when you finished your project!)
GROUP ADDRESS EXPORT AND IMPORT
IP-CONTROL TIPS & TOOLS
IMPORT OF GROUP ADDRESSES
Start the export of group addresses
BERKER TRAINING IP-CONTROL RELEASE 5 15507.2012
IP-CONTROL TIPS & TOOLS
OPC SERVER EXPORT
Save the file with the name „training “
BERKER TRAINING IP-CONTROL RELEASE 5 15607.2012
IP-CONTROL TIPS & TOOLS
OPC SERVER EXPORT
Check if files are avaible
BERKER TRAINING IP-CONTROL RELEASE 5 15707.2012
IP-CONTROL TIPS & TOOLS
ARRANGE GROUP ADDRESSES IN IP-CONTROL
Import group addresses in editor
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 158
IP-CONTROL TIPS & TOOLS
ARRANGE GROUP ADDRESSES IN IP-CONTROL
Import group addresses in editor
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 159
IP-CONTROL TIPS & TOOLS
ARRANGE GROUP ADDRESSES IN IP-CONTROL
Choose file, the group adresses will be imported automaticly
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 160
IP-CONTROL TIPS & TOOLS
ARRANGE GROUP ADDRESSES IN IP-CONTROL
Merge new group addresses
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 161
ARRANGE GROUP ADDRESSES IN IP-CONTROL
Choose „Open ESF File“
IP-CONTROL TIPS & TOOLS
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 162
ARRANGE GROUP ADDRESSES IN IP-CONTROL
Select file
IP-CONTROL TIPS & TOOLS
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 163
ARRANGE GROUP ADDRESSES IN IP-CONTROL
If deviant , select codepage
IP-CONTROL TIPS & TOOLS
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 164
ARRANGE GROUP ADDRESSES IN IP-CONTROL
Select group addresses for import
IP-CONTROL TIPS & TOOLS
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 165
ARRANGE GROUP ADDRESSES IN IP-CONTROL
Selected group addresses with a minus will be deleted !
IP-CONTROL TIPS & TOOLS
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 166
ARRANGE GROUP ADDRESSES IN IP-CONTROL
Selected group addresses with a plus will be added!
IP-CONTROL TIPS & TOOLS
07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 167
IP-CONTROL
168BERKER TRAINING IP-CONTROL RELEASE 5