Invitation to Baosteel BAC 2015 1bac.baosteel.com/baosteel_bac4HTML/download/FinalCircular.pdf ·...

Invitation to Baosteel BAC 2015 1Organizing Committee 2Conference Schedule 11Technical Sessions Schedule 12Technical Sessions 13Poster Presentation 60Registration 60Accommodation 61Transportation 61

Conference sponsors 62

Conference Secretariat 62

Concurrent events 62

The 10th CSM Steel Congress & The 6th Baosteel Biennial Academic Conference will be held along with the 18th Shanghai Metallurgy Expo from October 21th to 23th, 2015 in Shanghai, to co-develop a platform for all aspects of the industry could come together. "The 10th CSM Steel Congress " and "The 6th Baosteel Biennial Academic Conference "are large-scale and multi-disciplined academic conference co-sponsored for the first time by the Chinese Society For Metals and Baosteel Group Corporation. Conference aims to intensify the academic exchange and collaboration between domestic and overseas steel work, universities and research institutes, and to set up an exchange platform to jointly share the latest academic progress. The conference collected over 20 countries and regions, more than 1200 steel peers papers, including more than 110 overseas papers. The plenary lectures and the forum will focus on hotspots of steel industrial structure adjustment and transformation, technological innovation, eco-friendly steel industry, etc. There are 16 technical sessions, 500 oral reports, which will extend to down-stream steel users and fields of frontier technologies. All the scholars, engineers, and professionals are welcomed to take part in the conference, to discuss industry development trend, to share ideas and the latest research results. Many thanks to all the participants of CSM Steel Congress and Baosteel Biennial Academic Conference.

The Chinese Society For Metals Baosteel Group Corporation

Chairperson XU Kuangdi Academician of Chinese Academy of Engineering, China

Executive Chairperson

GAN Yong President of the Chinese Society for Metals, China

Academician of Chinese Academy of Engineering

XU Lejiang Vice President of the Chinese Society for Metals, China

Chairman of Baosteel Group Corporation, China

Secretary-General WANG Tianyi Executive Vice Chairperson of the Chinese Society for Metals, China

Director of Academic Committee ZHAO Pei Secretary general of the Chinese Society for Metals,China

Vice Secretary-General of Organizing Committee Deputy director of Academic Committee

ZHANG Pijun Assistant President of Baosteel Group Corporation, China

Director of Research Institute, Baosteel Group Corporation

Advisory Board(in alphabetic order by surname) Edwin BASSON Director General of World Steel Association, Belgium

Harry BHADESHIA Professor of University of Cambridge, UK

CAI Rang Vice President of the Chinese Society for Metals, China

Chairman of China Iron and Steel Research Institute Group

CHEN Derong President of Baosteel Group Corporation, China

Alan W. CRAMB Provost of Illinois Institute of Technology, USA

Anthony J. DeArdo Professor of University of Pittsburgh, USA

HONG Jibi Advisory of the Chinese Society for Metals, China

HUANG Boyun Academician of Chinese Academy of Engineering, China

JIN Wei Vice President of the Chinese Society for Metals, China

Chairman of Shougang Group Corporation

John J. JONAS Professor of McGill University, Canada

Eiki KASAI Professor of Tohoku University, Japan

Young-Kook LEE Professor of Yeusei University, Korea

LI Jinghai Academician and Vice-President of Chinese Academy of Sciences, China

LI Xinchuang President of China Metallurgical Industry Planning and Research Institute, China

LI Wenxiu Deputy director of experts committee of the Chinese Society for Metals, China

LIN Zhongqin Academician of Chinese Academy of Engineering

Vice President of Shanghai Jiao Tong university, China

LIU Jie

Vice President of the Chinese Society for Metals, China

Academician of Chinese Academy of Engineering

Vice President of China Association for Science and Technology

LU Gaoqing Vice President of the University of Queensland, Australia

LUO Hongjie Vice President of Chinese Materials Research Society, China

Professor of Shanghai University

John W. MORRIS Professor of University of California, Berkeley, USA

Kotobu NAGAI Director of the Materials Research for the Environment and Energy, National Institute for

Materials Science, Japan

John ROWE Secretary-General of International Stainless Steel Forum, Belgium

SHEN Wenrong Vice President of the Chinese Society for Metals, China

Chairman of Shagang Group Corporation

John G. SPEER Professor of Colorado School of Mines, USA

Marcos STUART Chief Technology Officer of Companhia Brasileira de Metalurgia e Mineração （ CBMM ） ,

Brazil

Brian G. THOMAS Professor of University of Illinois, USA

TSOU Jo-Chi Chairman of Taiwan Steel & Iron Industries Association, Taiwan, China

Chairman of China Steel Corporation

Fumitaka TSUKIHASHI Professor of Tokyo University, Japan

WANG Guodong Academician of Chinese Academy of Engineering,

Northeastern University, China

WANG Shyi-Chin Vice President of China Steel Corporation, Taiwan, China

WANG Yide Academician of Chinese Academy of Engineering

Taiyuan Iron & Steel (Group) Company Ltd., China

WENG Yuqing Academician of Chinese Academy of Engineering, China

XU Binshi Academician of Chinese Academy of Engineering, China

Vice President of China Construction Machinery Society

YANG Rui Vice President of the Chinese Society for Metals, China

Director, Institute of Metal Research of Chinese Academy of Sciences

YIN Ruiyu Academician of Chinese Academy of Engineering, China

Aibing YU Professor Vice-Chancellor and President (Suzhou)

Monash University, Australia

YU Yong Vice President of the Chinese Society for Metals, China

Chairman of Hebei Iron and Steel Group Corporation

ZHANG Shourong Academician of Chinese Academy of Engineering

Wuhan Iron and Steel (Group) Corporation, China

ZHANG Xiaogang

Vice President of the Chinese Society for Metals, China

Chairman of International Organization for Standardization

Vice Chairman of Ansteel Group Corporation, China

ZHANG Xinxin Vice President of the Chinese Society for Metals, China

President of University of Science and Technology Beijing

ZHAO Ji Vice President of the Chinese Society for Metals, China

President of Northeastern University, China

ZHONG Zengyong Director of experts committee of the Chinese Society for Metals, China

ZUO Liang President of Taiyuan University Of Science And Technology, China

ZUO Tieyong Academician of Chinese Academy of Engineering

Beijing University of Technology, China

Academic Committee(in alphabetic order by surname)

BAO Lei Secretary General of Analysis and Testing Committee of CSM,China

Vice President of the NCS Testing Technology Co., Ltd.

CHEN Qian Secretary General of Steel Rolling Committee of CSM,China

Professorate Senior Engineer of China Iron & Steel Research Institute Group

CHEN Shouqun Secretary General of Metal Coating Technology Committee of CSM,China

Professorate Senior Engineer of Baosteel Group Corporation

CHEN Zhuo Secretary General of Electrical Steels Committee of CSM,China

Master Instructor of Central China Normal University

DONG Han Director of Special Steels Committee of CSM,China

Professor of China Iron & Steel Research Institute Group

DU Bin Chief Researcher of Baosteel Group Corporation, China

DU Tao Secretary General of Metallurgical Energy Committee of CSM,China

Professor of Northeastern University

FU Jing

Secretary General of Intelligence Committee of CSM,China

Professorate Senior Engineer, Assistant President of China Metallurgical Information &

Standardization Institute

GUAN Kezhi Secretary General of Metallurgical Equipments Committee of CSM,China

Professor of University of Science and Technology Beijing

GUO Aimin Chief Engineer of CITIC Metal Co., Ltd., China

GUO Kezhong Vice Director of Planning Committee, Baosteel Group Corporation, China

JIANG Laizhu Deputy Director of Research Institute,Baosteel Group Corporation, China

JIAO Sihai Chief Researcher of Baosteel Group Corporation, China

LI Shanqing Chief Researcher of Baosteel Group Corporation, China

LU Jiangxin Vice President of the Baosteel Society for Metals, China

MI Zhenli

Secretary General of Metal Materials Deep Working Committee of CSM, China

Deputy Director of Metallurgical Engineering Research Institute, University of Science and

Technology Beijing

SHANG Chengjia Secretary General of Materials Science Committee of CSM, China


SUN Yanguang

Secretary General of Metallurgical Automation Committee of CSM,China

Deputy Director of Metallurgical Automation Research and Design Institute, China Iron and

Steel Research Institute Group

TANG Di Director of Metal Deep Processing Committee of CSM,China

Director of Advanced Rolling Center, University of Science and Technology Beijing

WANG Li Chief Researcher of Baosteel Group Corporation, China

WANG Xinhua Secretary General of Steelmaking Committee of CSM,China


Deputy Chief Engineer of Shougang Group Corporation

XU Hongwei Secretary General of Continuous Casting Committee of CSM,China

Professorate Senior Engineer of Capital Engineering & Research Incorporation Ltd.

YANG Jian Chief Researcher of Baosteel Group Corporation, China

ZHANG Hanqian Chief Researcher of Baosteel Group Corporation, China

ZHANG Jianliang

Secretary General of Ironmaking Committee of CSM,China Deputy

Director of Metallurgical and Ecological Engineering School, University of Science and

Technology Beijing

ZHANG Zhonghua Chief Researcher of Baosteel Group Corporation, China

ZHANG Zuonan

Vice Secretary General of Environmental Protection Committee of CSM,China

Senior Engineer of Central Research Institute of Building and Construction Co.,LTD, MCC

Group

Tuesday, October 20th 9:00-22:00 Conference Registration

Baolong Hotel 18:00-20:00 Buffet

Wednesday, October 21st 9:30-10:00 Opening Ceremony Shanghai New

International Expo Centre

10:00-12:00 Visiting Metallurgy Expo 11:00-13:00 lunch

13:30-15:40 Plenary Lecture Ⅰ Chairperson: CHEN Derong Invited Speakers: GAN Yong, Edwin BASSON, Hans Jürgen KERKHOFF, XU Lejiang, Kinya YANAGAWA

Kerry Hotel 15:40-16:10 Coffee Break

16:10-18:00 Plenary Lecture Ⅱ Chairperson: ZHAO Pei Invited Speakers: YU Yong, Hans FISCHER, Jong-Soo WOO, CAI Rang, ZHANG Xinxin, Marcos STUART

18:30-19:30 Buffet Thursday, October 22nd

8:30-12:00 Technical Sessions Baosteel Talent Development Institute 12:00-13:30 Lunch

13:30-17:30 Technical Sessions 18:00-19:00 Dinner Baolong Hotel

Friday October 23rd 8:30-12:00 Technical Sessions Baosteel Talent

Development Institute 12:00-13:30 Lunch 14:00-16:00 Baosteel Plant Tour 17:30-19:00 Buffet Baolong Hotel

End of Conference

Oct.22 8:30-12:00 13:30-17:30

Technical Sessions&Poster

Presentation (Baosteel Talent

Development Institute)

Ironmaking and Raw Materials A1-EN（Plenary Session）

Ironmaking and Raw Materials A2-CN/EN Ironmaking and Raw Materials A3-CN/EN

Steelmaking and Continuous Casting B1-EN

Steelmaking and Continuous Casting B4-EN

Steelmaking and Continuous Casting B2-CN




Rolling and Heat Treatment C1-EN

Rolling and Heat Treatment C3-EN

Rolling and Heat Treatment C2-CN

Rolling and Heat Treatment C4-CN

Surface Technology D1-EN

Surface Technology D2-CN/EN

Further Processing for Rolled Products E1-CN/EN

Further Processing for Rolled Products E2-CN/EN

Automotive Steel F1-EN

Automotive Steel F3-EN

Automotive Steel F2-CN

Automotive Steel F4-CN

Electrical Steel G1-CN/EN

Electrical Steel G2-CN/EN

Pipeline Steel and Linepipe H1-EN

Pipeline Steel and Linepipe H2-CN

Stainless Steel I1-EN Stainless Steel I2-EN Special Steel J1-EN Special Steel J2-CN Energy and Environmental Protection K1-CN/EN

Energy and Environmental Protection K2-CN/EN

Metallurgical Analysis L1-EN

Metallurgical Analysis L2-CN

Metallurgical Equipment and Engineering M1-CN/EN


Metallurgical Equipment and Engineering M2-CN


Metallurgy Intelligent Management and Control N1-CN

Metallurgy Intelligent Management and Control N2-CN

Information & Intelligence O1-CN/EN

Information & Intelligence O2-CN

Near-net-shape continuous casting of steel P1-EN

Near-net-shape continuous casting of steel P2-CN/EN

Oct.23 8:30-12:00 13:30-17:30

Technical Sessions&Poster

Presentation (Baosteel Talent

Development Institute)

Ironmaking and Raw Materials A4-CN/EN

Baosteel Plant Tour

Ironmaking and Raw Materials A5-CN/EN Ironmaking and Raw Materials A6-CN/EN Ironmaking and Raw Materials A7-CN/EN Steelmaking and Continuous Casting B7-EN Steelmaking and Continuous Casting B8-CN Steelmaking and Continuous Casting B9-CN Rolling and Heat Treatment C5-EN Rolling and Heat Treatment C6-CN Surface Technology D3-CN/EN Further Processing for Rolled ProductsE3-CN/EN

* The meeting rooms of technical sessions are arranged in the North Building, with the exception of A1-EN, A2-CN

Session A：Ironmaking and Raw Materials

A1-EN Plenary Session Academic Hall

Oct.22, 8:30-12:30 Chairpersons： Alexander BABICH , SHA Yongzhi

1* 8:30-9:00 YANG Tianjun The Transformation, Upgrade and Innovation of China’s Blast Furnace Ironmaking Technologies in the “New Normal” Economy

2* 9:00-9:30 Liming LU Recent advances in evaluation of iron ore for the sintering process

3* 9:30-10:00 MENG Qingbo Coordination and Development of the Iornmaking and Cokemaking Industries during their Transformation and Upgrading

4* 10:00-10:30 ZHU Renliang Progress in Past 30 Years and Looking Forward to the Future for Baosteel Ironmaking Technology

10:30-10:40 Coffee Break

5* 10:40-11:10 Aibing YU Modelling and Optimization of Ironmaking Blast Furnace

6* 11:10-11:40 ZOU Zongshu Non-Blast Furnace Ironmaking and COREX

7* 11:40-12:10 Alexander BABICH

Unconventional Raw Materials for Ironmaking

8 12:10-12:30 SHA Yongzhi Ironmaking Production and Technology Progress Overseas

A2-CN/EN Blast Furnace Iron-making Technology Academic Hall

Oct.22, 13:30-17:40 Chairpersons： Henrik SAXÉN, ZHANG Jianliang

1* 13:30-14:00 Henrik SAXÉN Investigation of Burden Distribution in the Blast Furnace

2 14:00-14:20 LOO Chin Eng Mechanisms determining softening/melting and reduction properties of lumps and pellets

3 14:20-14:40 LIN Chengcheng Influence of burden structure on the blast furnace production

4 14:40-15:00 ZHOU Ping Simulation of the cohesive zone in the blast furnace shaft with layered burden

5* 15:00-15:30 Baojun ZHAO Phase equilibria for primary slag and sulphide capacity for final slags in blast furnace


6* 15:40-16:10 XIANG Zhongyong Study on Implementation of Blast Furnace Low-Carbon Production Principle

7 16:10-16:30 HAN shufeng Production practice of No.10 BF on reducing fuel rate in Ansteel

8 16:30-16:50 WANG Peng Operating practice of dealing with the shaft wall thickening in Tang Steel No.2 BF

9 16:50-17:10 DONG Yue Exploration and optimization of the burden distribution pattern in Benxi Steel No.7 blast furnace

10* 17:10-17:40 Chenn Q. ZHOU Numerical simulation and visualization of blast furnaces

A3-CN/EN Process technology for energy saving and CO2 emission reduction Room 600

Oct. 22，13:30-17:40 Chairpersons：CHU Mansheng, BI Xuegong

1 13:30-13:50 WANG Panfeng The application of fourth generation new top-firing hot blast stove(ANNEC)

2 13:50-14:10 LIU Zhichao The BF operating practice with low cost in Ironmaking plant of Hanbao Steel

3* 14:10-14:40 WANG Chuan Value-in-use analysis of using olivine flux for agglomerate- and iron-making processes

4 14:40-15:00 SHEN Yansong Preliminary evaluation of injecting brown coals in ironmaking blast furnace

5 15:00-15:20 LIU Qingmei Current Status Analysis of the International Steel Industry Breakthrough Projects Based on Low Carbon Requirement


6* 15:30-16:00 CHU Mansheng Preparation and Metallurgy Properties of New Material for Ironmaking — Iron Coke Hot Briquette

7* 16:00-16:30 BI Xuegong Properties of Ferro-coke and Its Effect on Blast Furnace Reactions

8 16:30-16:50 ZUO Haibin Kinetic study of pyrolysis process of biomass

9 16:50-17:10 LIU Wenquan Discuss on the application and innovation of Blast furnace gas purification technology in low-carbon ironmaking process

10* 17:10-17:40 QIAN Liangfeng MXCOL® —Midrex® syngas based direct reduction technology

A4-CN/EN Iron Ore and Sintering Technology Room B201

Oct. 23, 8:30-12:30 Chairpersons：LU Liming, ZHU Deqing

1* 8:30-9:00 WU Shengli Research Progress of Optimization Technology of Ore-Blending for Sintering

2* 9:00-9:30 Kenichi HIGUCHI Recent Advances in Iron Ore Sintering in NSSMC

3 9:30-9:50 ZHU Deqing Enhancing the Sintering Performance of Blends Comprising High Ratio of Brazilian Hematite Concentrate By SMBGS Process

4 9:50-10:10 YU Bin Dissolution Kinetics of Al2O3, SiO2 into Calcium Ferrite Based Slag

5 10:10-10:30 GUO Xingmin Effect of MgO on melting and crystallization of CaO-Fe2O3 system


6 10:40-11:00 Damien O’DEA New Insights into Alumina Types in Iron Ore and their Effect on Sintering

7 11:00-11:20 ZHOU Maojun The technological upgrading revamping of sintering process and No. 4 sintering machine

（MA Luowen） putting into production in Baosteel

8 11:20-11:40 HE Shuzhen Research of Sintering Technology with High Fine Ore Ratio and Super-High Bed Height

9* 11:40-12:10 JIANG Tao An Approach of Quality-improving and Energy-saving for Sintering Process: Heat-Homogenizing and Deep-Bed sintering

10 12:10-12:30 HU Qichen The study of FeO content of sinter in Tangshan iron and steel Co.LTD

A5-CN/EN Technology to prolong campaign life of blast furnace Room 600

Oct. 23，8:30-12:10 Chairpersons：Chenn Q. ZHOU, ZHANG Fuming

1 8:30-8:50 HU Yuanshen Advanced Technology of Selection and Maintenance For the Cooling System of BF with Long Life and Low cost

2 8:50-9:10 ZOU Zuqiao Research and application of microporecorundum brick in WISCO blast furnaces

3 9:10-9:30 WANG Zhifeng The slag iron erosion and alkaline resistance of TD-I ceramic cup for large blast furnace

4 9:30-9:50 ZHAO Yongan A kind of lining material meeting safety of BF hearth and bottom — carbon composite brick

5 9:50-10:10 WANG Zhiyu Research on slag erosion resistance and hang of carbon composite brick

6 10:10-10:30 SUN Jian Discussion on the High Temperature of BF Hearth Sidewall and the Control Measures


7* 10:40-11:10 ZHANG Fuming Control Technology on Temperature Field of Blast Furnace Hearth and Bottom

8 11:10-11:30 XU Meng Analysis and Monitoring on the Corrosion Course of BF Hearth Sidewall

9 11:30-11:50 DAI Bing The basic research of blast furnace hearth activity

10 11:50-12:10 GUO Baoyu Transient Simulation of Titanium Compounds in a Blast Furnace Hearth during Titania Injection

A6-CN/EN Emission reduction and resourcing utilization in Iron-making procedure Room 100

Oct. 23，8:30-12:10 Chairpersons：LI Zhaoyi, ZUO Haibin

1 8:30-8:50 WU Wangping Application of the new dust prevention technology at raw material yard of Baosteel

2 8:50-9:10 Cantarino MARCOS

Contribution of Green Ore on Environment Protect

3* 9:10-9:40 HONG Yubin Successful Integration of partial FGD and SCR at Sinter Plant in China Steel Corporation

4 9:40-10:00 PEI Yuandong Application and Optimized Research on Waste of Iron and Steel Production Process during Sintering in Shougang Jingtang

5 10:00-10:20 WANG Peng (LIU Siyuan)

Evolution of combustion reactivity of chars pyrolysis catalyzed by CaO and combustion characteristics of semi-coke


6 10:30-10:50 JING Wenbo Research on the technological improvement of Rotary Hearth Furnace process

7 10:50-11:10 ZHAO Wei Preparation and optimization of vanadium-titanium magnetite carbon composite hot briquette

8 11:10-11:30 CHENG Gongjin Effect of B2O3 on the crushing strength of high-chromium vanadium-titanium magnetite pellets

9 11:30-11:50 ZHAO Jiaqi Study on the Process Utilizing Boron-bearing Iron Concentrate on Rotary Kiln Direct Reduction and Electric Furnace Smelting Separation

10 11:50-12:10 LAN Chenchen Effect of chlorine on the metallurgical properties of raw material and fuel of blast furnace

A7-CN/EN Coal blending, Coke-making and Coke quality Room 101

Oct. 23，8:30-12:10 Chairpersons：HU Desheng, MENG Qingbo

1 8:30-8:50 PENG Yonggen Usage of Weakly Caking Coal

2 8:50-9:10 ZHANG Qifeng Study on controlling Coke Ash

3 9:10-9:30 DU Ping Coking Coal Blending Technology Considering Coke Quality and Chemical Products Yield

4* 9:30-10:00 Maher AL-DOJAYLI

New Energy Recovery Pilot Coke Oven Concept and Design

5* 10:00-10:30 CHENG Leyi Application of the new coke-making technology with energy saving in BaoSteel


6 10:50-11:10 ZHANG Wencheng Experimental study on thermal performance of metallurgical coke

7 11:10-11:30 Sushil GUPTA High-Temperature Characteristics of Coke in Blast Furnaces

8 11:30-11:50 WANG Wei Anti-alkaline and Thermal reactivity of stamp charged coke

9 11:50-12:10 SUN Zhang Effect of the Addition of Steel Slag on the Properties of Coke: Preparation of High Strength and Highly Reactive Coke

Session B： Steelmaking and Continuous Casting B1-EN Room 200

Oct.22, 8:30-12:30 Chairpersons：Brian G. THOMAS, YANG Jian

1* 8:30-9:00 Brian G. THOMAS

Effect of EMBr on Multiphase Flow and Bubble Entrapment in Steel Continuous Casting

2* 9:00-9:30 ZHU Miaoyong Heavy Reduction Technology and Its Application for Bloom Continuous Casting Process

3 9:30-9:50 LIU ZhongqiuModeling of Bubbly Flow in Continuous Casting Mold incorporating Population Balance Approach

4 9:50-10:10 Steven G. JANSTO

Hot Ductility Behavior and Slab Crack Performance of Microalloyed Steels During Continuous Casting


5* 10:30-11:00 YANG Jian Effect of Manganese Contents on Solidification Characteristics of Medium and High Manganese Steel

6* 11:00-11:30 Pavel Ramirez E. LOPEZ

Numerical Modelling of Continuous Casting as a Real Tool for Process Improvement

7 11:30-11:50 LIU Ke Mathematical investigation of proper soft reduction parameters for CC bloom of railway steel

8 11:50-12:10 Danilo Di Napoli GUZELA

Nitrogen Control in Continuous Casting for High Strength Microalloyed Steels

9 12:10-12:30 WANG Engang Vertical Electromagnetic Brake Technique and Fluid Flow in Continuous Casting Mold

B2-CN hot metal pre-treatment、BOF steelmaking Room 300

Oct.22, 8:30-12:40 Chairpersons：ZENG Jiaqing,JIANG Xiaofang

1* 8:30-9:00 WANG Chengyi Numerical simulation study of stirring effect of bottom blowing on the duplex dephosphorization converter

2* 9:00-9:30 YANG Libin Dephosphorization Technique of 100t Converter Based on Bottom Intensity Blowing

3* 9:30-10:00 LI Weidong Practice of Controlling Mode for Economic Campaign Life of 180 t Converter

4 10:00-10:20 WU Wei The Melting Characteristics of the Recycling Slag in 300t Less Slag Smelting Converter and its Application Effects


5 10:40-11:00 YIN Chuan Practice on "Slag Residual and Reduced" Operation on 210ton furnace in Chongqing Steel

6 11:00-11:20 WANG Jie Trial experiments of slagless and efficient dephosphorization producing technology of combined blowing converter

7 11:20-11:40 ZHU Zhenghai Research And Development on Slag Composition Online Prediction Model System of Double Slag Process in BOF

8 11:40-12:00 QI Zhiyu 260t converter slag double slag process of smelting low phosphorus steel IF control of semi steel

9 12:00-12:20 LI Minghui Hydraulics Simulating Experiment Study on Hot Metal Magnesium Desulphurization by Injection lance with Gas Chamber

10 12:20-12:40 TENG Lidong Effect of ArcSave on the EAF Process Improvements and Cost Effectiveness in Both Carbon and Stainless Steel Production

B3-CN continuous casting technology Room 400

Oct.22, 8:30-12:05 Chairpersons：WEN Guanghua ,WANG Qiang

1 8:30-8:50 HU Zhigang The Development and Application of Slab Dynamic Roll Gap Control System based on "Force Detection"

2 8:50-9:10 LI Junwei Applied of Chamfered Mold on Slab Continuous Casting Production in WISCO

3 9:10-9:30 LIU Guoliang The Applying of Mould With Chamfered Corners for Continuous Casting of Slabs

4 9:30-9:50 CUI Heng Research on the Reactivity of Mold Fluxes forAl-TRIP Steel

5 9:50-10:10 JI Chenxi Effect of Asymmetrical Outlet SEN on Flow Field Control in Slab Mold


6 10:30-10:50 SU Xiaoli Analysis and Preventive Measures of Nozzle Clogging or Flocculating

7 10:50-11:10 GAO Hongtao Improve the pouring of molten steel on steel for automobile

8 11:10-11:30 DONG Jingang Analysis of the Factors Affecting the 3rd CC Production Capacity

9 11:30-11:50 LIN Fengqin Research and application of furnace temperature optimizing control for CSP tunnel furnace

10 11:50-12:05 XIAO xiaowen Online Measurement of Solidification End Point of Casting Slabs based on the Electromagnetic Acoustic Transducer

B4-EN Room 200

Oct.22, 13:30-17:10 Chairpersons： Fumitaka TSUKIHASHI ,WANG Xinhua

1* 13:30-14:00 WEN Guanghua Investigation on Crystallization and Heat Transfer of Low-Fluoride and Titanium-Bearing Mold Fluxes

2* 14:00-14:30 LI Guangqiang Inclusions in Al-Ti deoxidized Ca/Mg treated microalloyed steels

3 14:30-14:50 XIE Senlin Simulate the Transfer Behavior of Phosphorous in the Multi-phase Slag Through the Single Hot Thermocouple Technique

4 14:50-15:10 Hiroki KITAO Recovery of Zinc and Lead from Electric Arc Furnace Dust by Using Selective Chlorination and Evaporation Reaction


5* 15:30-16:00 Fumitaka Utilization of Steelmaking Slag for Rehabilitation of

TSUKIHASHI Marine Environment

6* 16:00-16:30 WANG Wanlin Current State Art of Mold Metallurgy

7 16:30-16:50 ZHANG Yanling Dephosphorization of red mud based flux

8 16:50-17:10 LIU Jiang Metal emulsion formed by bottom gas flow in Sn alloy/Oxide system

B5-CN second refining and liquid steel quality control Room 300

Oct.22, 13:30-17:05 Chairpersons： HUANG Zongze ,LIU Jianhua

1 13:30-13:50 WANG Xiaofeng Investigation on the novel technology of dephorphouization process due to the dispersed in-situ phase induced by the composite ball explosive reaction

2 13:50-14:10 DONG Jingang Matching Analysis of Ladle and LF Production Capacity

3 14:10-14:30 LV Shuai Discrete phase simulation of gas liquid flow in RH with ladle bottom blowing

4 14:30-14:50 WANG Shuhuan Physical simulation of bubble behavior in liquid steel under the condition of high pressure and bottom blow

5 14:50-15:10 WANG Xiaoshan Investigation on smelting process of ultra-low carbon steel production


6 15:30-15:50 ZHAO Xiao Research on Sulfide formation characteristics affected by Ca/S ratio in medium carbon steel

7 15:50-16:10 LI Fei Effect of Oval and Round Snorkels on Inclusions Behavior in the RH Process

8 16:10-16:30 ZHANG Fei Analysis of Different Technological Processes on the Cleanliness of Low Carbon Al-Killed Steel

9 16:30-16:50 TANG Haiyan Effect of blowing argon style on the mixing phenomena of ladle

10 16:50-17:05 HE Taotao The System of Intelligent Online Hydrogen Content Measuring in Molten Steel

B6-CN continuous casting technology Room 400

Oct.22, 13:30-16:25 Chairpersons：ZHU Miaoyong，ZHANG Lifeng

1 13:30-13:50 DONG Qipeng Simulation study on the heavy reduction at the end of slab

2 13:50-14:10 BAI Qingwei Numerical Simulation Research on Roll Type Electromagnetic Stirring in Secondary Cooling Zone of Continuous Casting Slab

3 14:10-14:30 LV Xianyu New Technologies Adopted in No.5 CC Revamping at Baosteel

4 14:30-14:50 GAO Fubin Practice on process for the thin slab continuous casting Tundish Temperature

5 14:50-15:10 WANG Fang The Research on Distribution of Multi-physics Field and Solidification under the Horizontal Vibrating Electrode in ESR process


6 15:30-15:50 GENG Mingshan Application status of Unidirectional Solidification Technology in Large Flat Ingot Manufacture

7 15:50-16:10 WANG Wei Characteristics for Solidified Structure Morphology of Hot-model Experimental Steel Samples Using CLSM-HT

8 16:10-16:25 XIA Jingliang High-productivity plants and innovative technologies meet market demands and future trends

B7-EN Room 200

Oct.23, 8:30-12:30 Chairpersons：Chris McDonald ,ZHANG Lifeng

1* 8:30-9:00 Chris McDonald Process Control Challenges and Opportunities for the Basic Oxygen Furnace

2* 9:00-9:30 ZHANG Lifeng Thermodynamic consideration and industrial trials study on calcium clean steel

3 9:30-9:50 Pouya ZANGENEH

Dynamic Load Characterization of Basic Oxygen Furnaces Using Random Vibration Analysis

4 9:50-10:10 YANG Shufeng Numerical simulation on moving behavior of inclusion during process of RH


5* 10:30-11:00 JIANG Xiaofang Optimization and Practice of 300t Converter Bottom Blowing Technology at Baosteel

6* 11:00-11:30 ZHAO Baojun Inclusion control in 55SiCr spring steels

7 11:30-11:50 ZHANG Qiaoyin Research on Behavior of Secondary Phase Particles Precipitation and Dissolution in Micro

8 11:50-12:10 LI Linmin Numerical Simulation of Multiphase Phase Flow in Ladle Metallurgy

9 12:10-12:30 WANG Xiaoyuan Research on the Reactivity and Grain Size of Lime Calcined at Extra-high Temperatures via Flash Heating

B8-CN steel grade development and quality control Room 300

Oct.23, 8:30-11:40 Chairpersons：LI Jing,LIU Chengjun

1* 8:30-9:00 LIN Rengan Formation Mechanism of Initial Defects in Continuous Casting Slab Based on Analysis of Mechanical Behavior

2 9:00-9:20 WANG Hongfeng Production Practice of the Cracks of Continuous Casting Slab

3 9:20-9:40 KANG Wei Research on Cleanliness of Silicon Steel Slab Produced in Unsteady Casting Process

4 9:40-10:00 HUANG Qi The Effects of Ti-Al Deoxidation Inclusion Size on Intragranular Acicular Ferrite nucleation

5 10:00-10:20 DONG Tingliang Control of Central Carbon Segregation of Hard Wire Steel in Hansteel


6 10:40-11:00 LI Shuangjiang Effect of Continuous Casting Speed and Heating Institution to Carbon Segregation Control of GCr15 Bearing Steel

7 11:00-11:20 ZHAO Dingguo The behavior of collision and adsorption for inclusion in submerged entry nozzle

8 11:20-11:40 MA Shuo Discussion for what Role Corner Cross Cracks Play in Side Defects on Hot Coil

B9-CN steel grade development and quality control Room 400

Oct.23, 8:30-11:55 Chairpersons：SHEN Minggang，CHENG Susen

1* 8:30-9:00 DENG Xiaoxuan Hook Character in Continuously-cast Steel Slabs for Cold-rolled Grades

2 9:00-9:20 LI Dejun Research situation on the influencing factors of the longitudinal surface crack of casting slab

3 9:20-9:40 YU Fuzhi Study on the Influence of Heavy Reduction on the Carbon Segregation of High Carbon Steel

4 9:40-10:00 YANG Xiangfu Formation reasons study on the transverse corner cracks in continuous casting slab

5 10:00-10:20 WANG Wei Investigation different technology of continuously cast of bearing steel segregation


6 10:40-11:00 WANG Shuhuan Numerical Simulation of Absorbing Inclusions with Rod in the Nozzle

7 11:00-11:20 HE Yuming Generous slab corner crack control technology

8 11:20-11:40 HUANG Chenghong The Production Practice of High Oxygen Enamel Steel

9 11:40-11:55 PAN Yu The Application of Automated Inclusion Analysis System on Improve the Quality of Steel

Session C： Rolling and Heat Treatment

C1-EN Room B303

Oct.22, 8:30-12:30

Chairpersons： Anthony J. DeArdo, ZHANG Hanqian

1* 8:30-9:00 John W. MORRIS

The Microstructure of Dislocated Martensitic Steel

2* 9:00-9:30 SHEN Yongfeng

Suppression of Twinning and Phase Transformation in an Ultrafine Grained 2 GPa Strong Metastable Austenitic Steel: Experiment and Simulation

3 9:30-9:50 ZHAO Xiaoting The Development of Armor Plate with Super High Strength 2000MPa in Baosteel

4 9:50-10:10 LV Lifeng Microstructure and Mechanical Behavior of Ultra-high Strength of Fine-grained AISI 4140 Steel


Chairpersons：ZHANG Liangchi, Sebastian MUENSTERMANN

5* 10:30-11:00 YANG Zhigang Memeory of Austenite an Fe-13Cr-5Ni Steel by in Situ Observation

6 11:00-11:20 LIANG XiaojunThe Occurrence of Separation in High Toughness Linepipe Steel during Drop Weight Tear Test

7 11:20-11:40 LI Xiaobing Analysis of Intragranular Acicular Ferrite in Low Carbon Steels with Zr and Mg Co-additions

8 11:40-12:00 LU Xiaohui Study on the Microstructure and Properties of High Strength Shipbuilding Steel with High Crack-Arrest

9* 12:00-12:30 Joachim G. WUNNING

Clean and Efficient Burner Systems for Heat Treating Furnaces

C2-CN Room B304

Oct.22, 8:30-12:20

Chairpersons ：WU Di，GAO Shan

1* 8:30-9:00 TANG Di The Microstructure of Dislocated Martensitic Steel

2 9:00-9:20 LIU Bin Suppression of Twinning and Phase Transformation in an Ultrafine Grained 2 GPa Strong Metastable Austenitic Steel: Experiment and Simulation

3 9:20-9:40 HE Chunyu The Development of Armor Plate with Super High Strength 2000MPa in Baosteel

4 9:40-10:00 LI Wenbin

5 10:00-10:20 LI Wen Microstructure and Mechanical Behavior of Ultra-high Strength of Fine-grained AISI 4140 Steel


Chairpersons：YU Wei，LIU Bin

6 10:40-11:00 LI Xinling Memeory of Austenite an Fe-13Cr-5Ni Steel by in Situ Observation

7 11:00-11:20 LI Chuanwei The Occurrence of Separation in High Toughness Linepipe Steel during Drop Weight Tear Test

8 11:20-11:40 LI Xiaolin Analysis of Intragranular Acicular Ferrite in Low Carbon Steels with Zr and Mg Co-additions

9 11:40-12:00 YANG Jing Study on the Microstructure and Properties of High Strength Shipbuilding Steel with High Crack-Arrest

10 12:00-12:20 YUAN Qing Clean and Efficient Burner Systems for Heat Treating Furnaces

C3-EN Room B303

Oct.22, 8:30-12:20

Chairpersons： John W. MORRIS , WANG Wei

1* 13:30-14:00 John J. JONAS Dynamic Transformation of Austenite to Ferrite during The Torsion Simulation of Strip Rolling

2* 14:00-14:30 Sebastian Muenstermann

A Hybrid Damage Mechanics Model to Predict the Impact Toughness of Structural Steel

3 14:30-14:50 LIU Qingdong Competitive Formation of Reverted Austenite with Cu-rich precipitate and alloyed carbide in a HSLA Steel during Intercritical Heat Treatment

4 14:50-15:10 WANG Shuangcheng

Effect of Ti Content on Microstructure and Properties of Hot-rolled Low Carbon Steels for Enamelling


Chairpersons：Remn-Min GUO,LI Shanqingi

5* 15:30-16:00 ZHANG Liangchi Characterizing the Interface Stresses between an Elastic Rough Ball and a Smooth

Rigid Plate under Lubrication

6* 16:00-16:30 GUO Remn-Min Development of the Unified Rolling Force Model Using von Karman Equation on Elastic

Foundation Method

7 16:30-16:50 Bas SMEULDERS Assessment of cold rolling lubricants by 3-D Stribeck curves and Roll Bite Mimicking

tests

8 16:50-17:10 SHEN Yuchun The Application of Object-Oriented Technology to Coil Temperature Control in Hot Strip Mill

9 17:10-17:30 ZOU Shuliang The Thermal-Mechanical Coupled FEM Analysis on Continual Tube Rolling MPM Deformation Process

C4-CN Room B304

Oct.22, 13:30-17:40

Chairpersons：HE Anrui，XU Jiachun

1* 13:30-14:00 HE Anrui Online upgrading of process control system for thin slab continuous casting and rolling

2 14:00-14:20 ZHANG Yong The Application and Development of variable gauge rolling technology in Baosteel 1880 hot mill

3 14:20-14:40 WANG Junlin Effect of annealing temperature on structure and mechanical properties of S450EW

4 14:40-15:00 HU Yanhui The Effect of U-shape Coiling Temperature Method on Uniformity of Mechanical property for Hot-Dip Galvanized Low Carbon Aluminum Killed Steel Sheet

5 15:00-15:20 AN Shoubin Mechanism investigating on the Hot rolled strip Edge shell defects


Chairpersons：HU Hengfa，LI Weigang

6 15:40-16:00 HE Hengfa Discussion on application of intelligent manufacturing technology in steel industry

7 16:00-16:20 LI Weigang Research and Application of a New Method of Load Distribution for Hot Strip Mill

8 16:20-16:40 WU Zhenquan High efficiency rolling technology of rough rolling in Baosteel 2050mm hot rolling production line

9 16:40-17:00 YE Hongwei The Regression for parameters of rolling force model with historical data

10 17:00-17:20 SUN Jianliang Simulation of rolling force deviation of heavy plate mill

11 17:20-17:40 CHEN Jinfu Technical conception of the combination of “Four Rollers Mill” and continuous casting

C5-EN Room B303

Oct.23, 8:30-12:30

Chairpersons：JIANG Zhengyi, JIANG Zhenglian

1* 8:30-9:00 Anthony J. DeArdo A Study of the Microstructure and Properties of Dual-Phase Steels Processed Using A Continuous Galvanizing Line Simulation

2* 9:00-9:30 HUANG Han Novel nano-particle water based lubricants for hot rolling of steels

3 9:30-9:50 Jan ROIK Improvement of Mechanical Properties of Cold Rolled High Strength DP-steels using Laboratory Scale Process Simulations

4 9:50-10:05 Ahmed FAKIH Process simulation and operation for long products

5 10:05-10.20 Benjamin ZUTER Perfect SBQ Production with optimized Machinery and Processes


Chairpersons：Pascoal Bordignon, SHAN Xuyi

6* 10:30-11:00 JIANG Zhengyi Microstructure and Hot Deformation Behaviour of High-Cr Cast Iron / Low Carbon Steel Composite

7 11:00-11:20 CHEN Zhenye Study of Clad Rolling Technology on Super-heavy Plates

8* 11:20-11:50 GAO Shan Development and Application of Steel for Marine Engineering in Baosteel

9 11:50-12:10 Garry GAFFIT MULPIC In-line Intensive Cooling for Plate and Plate Steckel Mills

10 12:10-12:30 Sandip SAMARA Optimising Plate Surface Quality and Flatness

C6-CN Room B304

Oct.23, 8:30-11:35

Chairpersons：KANG Yonglin，LI Jun

1* 8:30-9:00 LI Jun Development of Baosteel Rapid Annealing Simulation for Steel strips

2 9:00-9:20 TAO Tao Analysis and solution to 4830mm transverse stripes at cold rolling mill

3 9:20-9:40 CHEN Bing Research on vibration inhibition experiment of 1970 cold rolling mill

4 9:40-10:00 HU Jingfan Effect of aging temperature on microstructure and properties of low alloy high strength steel under ultra-fast cooling condition


Chairpersons：KANG Yonglin，LI Shanqing

5 10:20-10:40 LIN Xiao Numerical simulation on residual stress of martensitic thin steel strip in tension during water quenching process

6 10:40-11:00 DOU Ruifeng Prediction model for temperature, grain size and mechanical properties of cold rolled stainless steel in continuous annealing process

7 11:00-11:20 JIA Shenghui Application and optimization of flatness setpoint curve in 2180mm cold strip mill

8 11:20-11:35 SUN Ke KOCKS Rotation Mill an innovative elongation method for seamless tubes

Session D：Surface Technology

D1-EN Room B403

Oct.22, 8:30-11:50 Chairperson： DAI Yigang

1* 8:30-9:00 Chris LOWE Technology Trends in the Surface Coatings Industry and How They Address the Issue of Sustainability

2 9:00-9:20 LI Jing Correlations between chemical state, dispersion state, and anticorrosive properties of graphene reinforced waterborne polyurethane composite coatings

3* 9:20-9:50 Sean FOWLER

The Current State of the Art in Laboratory Corrosion Test Methods

4 9:50-10:10 REN Yuchang Research of the silicon steel surface coating and insulation


5* 10:30-11:00 Nicolas EVEN NIR rapid solidification technology and its application

6* 11:00-11:30 DAI Yigang Several trends of the development of pre -coated steel strips

7 11:30-11:50 LI Zitao Influence of Surface Roughness of Cold-rolled Steel Sheet on Surface Morphology of Phosphate Coatings

D2-EN/CN Room B403

Oct.22, 13:30-16:50 Chairperson：LI Jing

1* 13:30-14:00 Wilhelm KARNER

Pickling and galvanizing of thin hot strip:a comparison of two processes

2 14:00-14:20 ZHANG Yi Application of picking passivation technology in cold rolling production

3 14:20-14:40 JIANG Guangrui Study of A Dot Defect on Surface of Hot-Dip Galvanized Steel Sheet

4 14:40-15:00 Gary J. LOMBARDO

An Advanced Electrolyte and Flux System Used to Convert Phenol Sulfonic Acid Electrotin Lines to Methane Sulfonic Acid


5 15:20-15:40 LI Ning The mechanism, application and prospect of additives using in methanesulfonic acid electrolyte for tin high speed electroplating

6 15:40-16:00 DING Zhilong Study on stamping properties of galvalume coating

7* 16:00-16:30 Carol LEVEY Self Fluxing Electrolytes for High Speed Tin Electrodeposition

8 16:30-16:50 LUO Qun The effect of Ti addition on the precipitated phases in hot-dip 55wt.%Al-Zn-Si coatings

D3- EN/CN Room B403

Oct.23, 8:30-11:50 Chairperson：Kwang-Leong CHOY

1* 8:30-9:00 Kwang-Leong CHOY

Innovation in surface coating technology

2 9:00-9:20 ZHANG Zhejun Blue film and its application

3* 9:20-9:50 XING Wenping Development Trends of automobile painting industry

4 9:50-10:10 SU Yanjing Corrosion mechanism and anticorrosion design of Marine steel


5 10:30-10:50 LI Lin Study on Corrosion Behavior of Q420qENH Bridge Steel in Simulated Ocean Environment

6 10:50-11:10 LI Jing Application and Research of Finite Element Numerical Simulation on Permanent Magnet Sealing in Hot-dip Galvanizing

7 11:10-11:30 LIANG Yongli Effect of post-annealing on the microstructure and mechanical properties of cold- sprayed Zn-Al coatings

8 11:30-11:50 XU Jin Effect of La on the dross formation in the hot-dip 55%Al-Zn-Si bath

Session E： Further Processing for Rolled Products

E1-EN/CN Room 405

Oct.22, 8:30-12:20 Chairpersons：TANG Di ,CAO Qing

1* 8:30-9:00 TANG Di Iron and steel enterprise service transformation and steel further processing

2* 9:00-9:30 KOICHI SUGITA

The further processing of wire rod

3* 9:30-10:00 ZHANG Ke Introduction of automobile top-down design

4* 10:00-10:30 David JONES Steel Developments for the Packaging Industry


5* 10:40-11:00 Pietro PASSONE

How to reduce weight at cheaper cost

6* 11:00-11:20 LI Ruichun The research on the applied technology of magnesium alloy in railway vehicle.

7* 11:20-11:40 WANG Xu The state-of-the-art and tendency of lightweight technology

8* 11:40-12:00 DONG Xuefeng

The requirements of the material for automotive lightweighting

9* 12:00-12:20 LI Qiang The technology of variable cross-section bending forming by using Flexible roll-die forming technology for variable cross-section

E2- CN/EN Room 405

Oct.22, 13:30-16:40 Chairpersons：HAN Jingtao ZHANG Lubing

1 13:30-14:00 GAN Yong Development of Advanced Compact Steel Process and Deep Working Technology for High-

Strength-Ductility Auto-Parts

2 14:00-14:20 SONG Wei Better iron and steel and better products to start happy dream

3 14:20-14:40 Albert SEDLMAIER Study on High Volume Flexible Manufacturing by using the Sheet Metal Roll Forming Process

4 14:40-15:00 HAN Jingtao Study on Local Hot Forming Process of Ultra-High Strength Roll-Formed Parts for Automobile


5 15:20-15:40 MI Zhenli The development of hot metal gas forming technology

6 15:40-16:00 ZHANG Peng Influence and mechanism of steel cord 72A oxide scale situation on the mechanical descalability

7 16:00-16:20 CUI Shiyun The development of 7×（3+9+15×0.245）+0.245 HT steel cord

8 16:20-16:40 SHENG Zhenjian Development and market prospect of high-strength cold-rolled steel in bus body frame

E3- CN/EN Room 405

Oct.23, 8:30-11:10 Chairpersons：MI Zhenli MIN Xuegang

1* 8:30-8:50 Thomas KRÜCKELS

Better Steel, Better Life Need Forming Innovation

2 8:50-9:10 XU Shiwei Development of high strength and flame-retardant magnesium alloys for rail transit vehicles

3 9:10-9:30 HU Donghui Development of Test Machine for Wire Drawing Lubrication Performance Evaluation

4 9:30-9:50 YAN Peijie Optimization of technical parameters of roll bending of high-strength rectangular tube based on response surface method


5 10:10-10:30 Yong Sun A New Residual Stress Measurement Method for Roll Formed Products

6 10:30-10:50 SUN Jiquan Research on Inelastic Recovery Behavior of Transformation-induced Plasticity Steels

7 10:50-11:10 LIU Chao Research on Static Recrystallization of Ultra-low Carbon steel Qst32-3

Session F： Automotive Steel F1-EN Room 314

Oct.22, 8:30-12:20 Chairpersons：WANG Li，Peter HODGSON

1* 8:30-9:00 WANG Li Development and application of the 3rd Generation Q&P steels

2* 9:00-9:30 Peter HODGSON Nanoscale precipitates and cluster formation in AHSS

3* 9:30-10:00 John G SPEER Nb-Microalloying in Next-Generation Flat-Rolled Steels

4 10:00-10:20 HE Binbin An investigation on the tensile property of 10%Mn TRIP/TWIP dual phase steels


5 10:40-11:00 YI Hongliang TiB2-reinforced steel matrix composite developed for a new generation AHSS with combination of low denstiy, high Young's modulus, strength and ductility

6 11:00-11:20 Jean-Paul NAUZIN Lightweight impact on grade development

7 11:20-11:40 ZHAO Chao Microstructure and Mechanical Properties of a low-density high-strength Fe-Mn-Al-C steel

8 11:40-12:00 HU Zhiping Microstructures and tensile deformation behavior of a cryogenic-rolled Mn-Al TRIP steel

9 12:00-12:20 Nina FONSTEIN Effects of Structure Refinement on Properties of Multiphase AHSS

F2-CN Room 304

Oct.22, 8:30-11:50 Chairpersons：HUI Weijun，WANG Zhongying

1 8:30-8:50 DING Yi Effect of the cooling speed on the microstructures and the properties in micro-alloyed steel for car

2* 8:50-9:20 LIU Liu Study on Generation Mechanisms of Large Inclusions during Bearing Steels Refining Process by Tracer Method

3 9:20-9:40 CHEN Jilin Research on low temperature Impact toughness of high strength Wind power bolt Steel

4 9:40-10:00 WU Liwen Effect of austenitizing and isothermal transformation temperature on the microstructure and properties of high carbon steel wire rod

5 10:00-10:20 ZHANG Yehua Research on finite element simulation of the big size spring steel in continuous grooveless rolling


6* 10:40-11:15 QIN Min Development and application of automotive long products for Baosteel

7 11:15-11:30 LUO Yizheng Analysis of the low hardness of 50CrVA

8 11:30-11:50 YANG Chao Influence of banded microstructure on quenching dilatometry in 20CrMoH gear steel and numerical simulation

F3-EN Room 314

Oct.22, 13:30-17:20 Chairpersons：KANG Yonglin，Wolfgang BLECK

1* 13:30-14:00 KANG Yonglin High strain rate behavior and nano-precipitation of cold rolled high strength automobile steel sheets

2* 14:00-14:30 Wolfgang BLECK Knowledge based steel design for improved performance

3* 14:30-15:00 HUANG Mingxin Twinning mechanism in TWIP steel: from single crystalline micro-pillar to bulk sample

4 15:00-15:20 ZHANG Xianguang

Controlling of abnormal austenite grain growth in banded ferrite/pearlite steel by cold deformation

5 15:20-15:40 LIANG Zhiyuan Determining the respective hardening effects of twins, dislocations, grain boundaries and solid solution in a twinning-induced plasticity steel


6 16:00-16:20 Bernard ENNIS On the role of aluminium in segregation and banding in multiphase steel

7 16:20-16:40 ZHANG Yongjie Relationship between hardness and ferrite morphology in VC interphase precipitation strengthened low carbon steels

8 16:40-17:00 ZHOU Peng Evolution of microstructures in a nanotwinned steel investigated by nanoindentation and electrical resistivity measurement

9 17:00-17:20 Alain GENAUD Wet Flash Cooling®: advanced technology to anneal current and future AHSS

F4-CN Room 304

Oct.22, 13:30-17:30 Chairperson：LIU Liu, QIN Min

1* 13:30-14:00 HUI Weijun Service behavior study for high strength fastener steel

2 14:00-14:20 WANG Nintao The Flexible control of scale on the Wire surface

3* 14:20-14:50 WANG Zhongying Development and production process optimization of high quality wear resistant steel

4 14:50-15:10 JIN Fen The Effect of Step-Cooling Process on Decarburization and Structures of 55SiCr Spring Steel


5* 15:25-15:55 LIU Jianhui Attention and Consideration on some common problems in the development of high quality special steel

6 15:55-16:15 WANG Xianzhong Development on V-N Microalloyed Steel Used in Fracture Splitting Connecting Rods

7 16:15-16:35 ZHAO Haoyang Quenching and Tempering of Steel for 12.9-Grade High Strength Fasteners

8 16:35-16:55 ZHANG fan Smelting and Performance Research of BN-type Automotive

9 16:55-17:15 LIU Yangbo A New Method for Dendrite Revelation of Continuous

F5-EN Room 314

Oct.23, 8:30-12:00 Chairpersons：DONG Han, Young-Kook LEE

1* 8:30-9:00 DONG Han Third generation of automotive steel: principle and practice

2* 9:00-9:30 Young-Kook LEE

The influence of pre-deformation on tensile properties of hydrogen-charged austenitic stainless steels

3* 9:30-10:00 JIN Xuejun Improved hydrogen embrittlement by quenching-partitioning-tempering treatment in high strength steels

4 10:00-10:20 ZHANG Yulong Influence of grain size and temperature on austenite stability in medium manganese steels


5 10:40-11:00 LIU Qinglong Study on hydrogen permeation in DP and Q&P grades of AHSS under cathodic charging and simulated service conditions

6 11:00-11:20 YU Shih-Chuan Development of “Hot Forging Non-quenched and Tempered Steel”

7 11:20-11:40 Jeffrey VENEZUELA

Evaluation of hydrogen embrittlement susceptibility of four martensitic advanced high strength steels using the Linearly Increasing Stress Test

8 11:40-12:00 ZHOU Qingjun Experimental study on delayed fracture of TS 980MPa grade steels for automotive applications

F6-CN Room 304

Oct.23, 8:30-12:00 Chairpersons：GAO Yongsheng, ZHAO Zhen

1* 8:30-9:00 ZHAO Zhen The Research Advances of Mechanism and Process Optimization for Medium-thick Sheet Metal Fine-blanking

2* 9:00-9:30 XU Weili Research and industrial application of advanced forming technology for automobile lightweight in Baosteel

3* 9:30-10:00 HAN Jingtao Roll forming, HSS and automotive industry

4* 10:00-10:20 GAO Yongsheng AHSS solution for automobile lightweight


5 10:40-11:00 LIANG Jiangtao Mechanical behaviour research of high strength IF steel under different strain rate tensile loading

6 11:00-11:20 LIU Huasai Fatigue properties of 780 MPa grade hot-dip galvanized dual phase steel

7 11:20-11:40 LUO Zhichao Bauschinger effect and its influence on residual stress of a twinning induced plasticity steel

8 11:40-12:00 SUN Yong The Experimental Investigation on Chain-die Forming U-Profiled AHSS Products

Session G： Electrical Steel G1-CN/EN Room B201

Oct.22, 8:30-12:30 Chairpersons：WANG Guodong , WU Bin

1* 8:30-9:00 WANG Guodong

Advantages and Potentials of E2Strip-A Subversive Strip Casting Technology for Production of Electrical Steels

2* 9:00-9:30 CHEN Zhuo Research on the capacity, technological progress and demand of electrical steel in China

3 9:30-9:50 Leo KENSTENS

Texture control of Non-Oriented Steels

4 9:50-10:10 MAO Weimin {100}Texture control and magnetic property improvement of Non-oriented Steels

5 10:10-10:30 SHA Yuhui Recrystallization Texture Transition in Non-Oriented Silicon Steels


6 10:40-11:00 CHEN Xiao Development of Non-oriented Silicon Steels for Traction Motors of Electric Vehicles

7 11:00-11:20 Jae-hoon KIM Non-oriented Electrical Steels for Eco-friendly Vehicles

8 11:20-11:40 DU Guangliang Development of Non-oriented Electrical Steel for High-efficiency Motors

9 11:40-12:10 MIAO Xiao Research on Heat treatment Process Before and After Cold-rolling of High Grade Cold-rolled Non-oriented Silicon Steel

10* 12:10-12:30 WANG Shuanghong

Effect of Coating Process on Morphology of chromate-free insulating film on Silicon Steel

G2-CN/EN Room B201

Oct.22, 13:30-17:20 Chairpersons：Anthony John MOSSE ，XIE Shishu

1* 13:30-14:00 Anthony John MOSSE

Desired Characteristics of Non-Oriented Electrical Steels for Use in Next Generation, Energy Efficient, Electrical Power Equipment

2 14:00-14:20 ZHOU Shaoxiong Development Trend of New Materials and Fe-base Amorphous

3 14:20-14:40 LI Xiaoyu Research Status of Preparation Methods and Application Prospect for Fe based amorphous

ribbons

4 14:40-15:00 CHU Dewei Strain hardening behavior during multistep nanoindentation of FeSiB amorphous alloy

5 15:00-15:20 YAO Yongchuang

Recrystallization Texture and Magnetic Properties of Two-Stage Cold Rolled Fe-6.5wt.%Si thin sheet

15:20:15:30 Coffee Break

6 15:30-15:50 FAN Xi’an Novel soft magnetic composites materials prepared by in-situ chemical deposition process combined with high temperature

7 15:50-16:10 WANG Xiaoyan

Measurement Method and Application for Magnetic Properties of Electrical Steel under Modeling Working Conditions

8 16:10-16:30 Johnston GWYNNE Gas Tungsten Arc / Tungsten Inert Gas Welding of Laminations

9* 16:30-17:00 ZHANG Zhou Design a Series of IE2 Motor with High Efficiency Electrical Steel for Cost-Reduction

10 17:10-17:20 GAO Guokai Application of Wound Core Transformers in Traction Power Supply System of Rail Transit

Session H： Pipeline steel and linepipe H1-EN Room B404

Oct.22, 8:30-12:10 Chairpersons：Frank J. BARBARO , ZHENG Lei

1* 8:30-9:00 Fletcher LEIGH Line pipe for the QCLNG pipeline in Queensland, Australia

2 9:00-9:20 Mario GONZALEZ Characterization of a Low Manganese Niobium Microalloyed Pipeline Steel For Sour Service

3 9:20-9:40 WANG Bo Quality control of X70M pipeline plate in Baosteel

4 9:40-10:00 LI Huijun Influence of Centreline Segregation on Charpy Impact Properties of Line Pipe Steel

5 10:00-10:20 WANG Xu Development of X 80 Linepipe for Strain-based Design Pipeline


6* 10:40-11:10 Frank J. BARBARO

Characteristics of Self-Shielded Flux Cored Arc Welding Consumables for High Strength Steel Grades

7 11:10-11:30 Fonzo ANDREA

Microstructure identification for X80 plates/pipes with low temperature toughness and enhanced strain capacity

8 11:30-11:50 QU Jinbo Effect of Strain Aging on the Tensile Property of an X100 Pipeline Steel with Different Microstructures

9 11:50-12:10 ZHANG Xiaobing

Microstructure Control of the High Performance Steel and Development of Heavy Pipeline Steel Plates with High Toughness at a Low Temperature for Φ1422×32mm K60-E2 LSAW Pipes

H2-CN Room B404

Oct.22, 13:30-17:20 Chairpersons：SHANG Chengjia, ZHANG Chuanguo

1* 13:30-14:00 XIE Shiqiang Development and application of UOE linepipe for special need at Baosteel

2* 14:00-14:30 BI Zongyue Development of X80 large diameter and thick wall SSAW pipe with Ø1219×22mm in China

3 14:30-14:50 NIU Tao Research on Microstructure and Property of Ultra-thick X70 Hot-rolled Pipeline Coil

4 14:50-15:10 KONG Xianglei Effect of pipe body alloy on weldability of X80 steel

5 15:10-15:30 LIU Hongliang Effect of Rolling Process on Microstructure and Properties in Thickness Pipeline Steel


6* 15:50-16:20 FENG Bin Research on Cold Bending Process and Performances for High-grade Pipeline Steels

7 16:20-16:40 LIU Shuo Toughness Analysis for Pipeline Cellulose Electrode High Speed Girth Welding Joint

8 16:40-17:00 CUI Lei The effect of cooling rate on the transition behaviors of ultra strength steel X90

9 17:00-17:20 SUN Leilei The Influences of Annealing Process on the Microstructure and Mechanical Properties of Hot-rolled High-strength Steel

Session I：Stainless Steel I1-EN Austenitic and duplex stainless Room 413

Oct.22, 8:30-11:50 Chairpersons：Jacques CHARLES , LV Jian

1* 8:30-9:00 Jacques CHARLES

Duplex families and applications:A review

2* 9:00-9:30 WANG Yan Overview of the research on candidate materials for advanced ultra-supercritical boiler tubes

3 9:30-9:50 HU Jincheng The effect of tensile deformation on strain induced martensite and pitting corrosion resistance for a new developed lean duplex stainless steel

4 9:50-10:10 ZHANG Shucai Research on the Microstructure and Properties of Super Austenitic Stainless Steel 654SMO


5* 10:30-11:00 LV Jian Development of high strength and high ductility nanostructured stainless steels and applications in different industries (automotive, energy, bioimplant, construction)

6* 11:00-11:30 WAN Xiangliang

Effect of Grain Refinement on Deformation Mechanism and Mechanical Properties of 301LN Austenitic Stainless Steel

7 11:30-11:50 JI Dengping Development and application of nitrogen bearing austenitic stainless steels in Baosteel

I2-EN Ferritic stainless Room 413

Oct.22, 13:30-16:50 Chairpersons：JIANG Laizhu， JIANG Zhengyi

1* 13:30-14:00 JIANG Laizhu Current status and future prospect of ultra-pure ferritic stainless steels in Baosteel

2* 14:00-14:30 Hirakawa NAOKI

Effect of Aging Treatment on Bending Workability of Dual Phase High Strength Stainless Steel

3 14:30-14:50 HAN Jian Microalloying effects on microstructure and mechanical properties of 18Cr-2Mo ferritic stainless steel plate

4 14:50-15:10 ZHANG Wei The Development and Application of Modern Nb Microalloyed Ferritic Stainless Steel


5* 15:30-16:00 JIANG Zhengyi Oxidation and Sticking of Stainless Steels in Hot Rolling

6* 16:00-16:30 LIU Zhenyu Study of manufacturing process for high strength and high formability ferritic stainless steels

7 16:30-16:50 WANG Yuwei Effect of annealing temperature after cold rolling on deep drawability of ultra-pure ferritic stainless steel

I3-EN Processing and application Room 413

Oct.23, 8:30-12:10 Chairpersons：John ROWE , ZHANG Lifeng

1* 8:30-9:00 John ROWE A Review of the Markets for Stainless Steel

2* 9:00-9:30 LI Moucheng Corrosion Behavior of Stainless Steels in Simulated Automotive SCR environments

3 9:30-9:50 YUE Yingying Accelerated Descaling and Polishing of Ferritic Stainless Steel during the HCl-based Pickling Process

4 9:50-10:10 Gaetano RONCHI An Overview on the Adoption of Stainless Steel for Drinking Water Distribution Systems


5* 10:30-11:00 ZHANG Lifeng Formation Mechanism of White Stripe Defects in Ultra-pure Ferritic Stainless Steels

6* 11:00-11:30 LV Xuewei Thermal Analysis Kinetics of the Solid-State Reduction for Nickel Laterite

7 11:30-11:50 ZHANG Yanling Reduction of Cr during smelting treatment of stainless steel dust

8 11:50-12:10 Florent BAUDU Latest improvements for stainless steel 20Hi rolling process : Ultimate technical breakthrough for advanced rolling efficiency and Capex/Opex optimization

Session J：Speical Steel J1-EN Room 415

Oct.22, 8:30-12:00 Chairpersons：LIU Xiaorong, JIANG Zhouhua

1* 8:30-9:00 LIU Zhengdong Development of Boiler Pipes Used for 600+℃ A-USC-PP in China

2* 9:00-9:30 DONG Jianxin Metallurgy Research on Superalloys Ingot Homogenization and Breakdown Process

3* 9:30-10:00 QIANG Yinghuai Abrasion of Coal Mine Machinery and Matierial for Anti-abrasion


4* 10:20-10:50 SUN Wenru Distribution and Segregation of P in IN706 Alloy

5* 10:50-11:20 James Case WILLIAMS

Additive Manufacturing for Aerospace Applications: Developments and Challenges

6 11:20-11:40 WANG Qiang A Three-Dimensional Comprehensive Model for the Prediction of Macrosegregation in

Electroslag Remelting Ingot

7 11:40-12:00 LUO Yi Study on Precipitates Evolution in 10Ni3MnCuAl Steel after Aging

J2-CN Room 415

Oct.22, 13:00-17:10 Chairpersons：DONG Jianxin，SUN Wenru

1* 13:00-13:30 JIANG Zhouhua Latest Progress in Development and Application of High Nitrogen Stainless Steels

2* 13:30-14:00 GU Yuefeng New Generations of Cast & Wrought Superalloys for Applications Beyond 700oC

3* 14:00-14:30 ZHAO Xin Application and Development of BSMC New Alloys

4 14:30-14:50 XU Songqian Progress of 700℃ Advanced Ultra-supercritical (A-USC) Boiler Tubes


5 15:10-15:30 ZHANG Fucheng

Research and Application of Low Temperature Bainite Steel Containing Si/Al

6 15:30-15:50 LI Shijian Study on the Steel Composition Variation and Inclusions Characteristics of GCr15 Bearing Steel through ESR

7 15:50-16:10 TAN Zhidong Effect of Water Toughening Temperature on Microstructure and Properties of Fe-26Mn-7Al-1.3C Austenitic Steel

8 16:10-16:30 ZHU Hongchun Effect of Pressure on The Macrostructure of High Nitrogen Steel

9 16:30-16:50 ZHANG Yuehong Research on Heat Treatment Technology of GH2132 Alloy Cold-drawing Bar

10 16:50-17:10 WANG Tingting Investigation on C-HRA-1 Suerpalloys Tube for 700℃ A-USC Plants

Session K： Energy and Environment K1-CN/EN Room B206

Oct.22, 8:30-12:20 Chairpersons：WANG Chuan, DU Tao

1* 8:30-9:00 WANG Chuan Assessment of low temperature waste heat utilization in the steel industry through process integration approach

2* 9:00-9:30 XIANG Shunhua

The thinking about energy saving new technology for whole iron and steel manufacture process

3 9:30-9:50 LIU Sen Research and application of Waster Heat Recovery System of Slag Water and Slag Steam in Blast Furnace

4 9:50-10:10 ZHOU Huimin The Application Progress of High Radiative Coating Technology in Ironmaking


5* 10:30-11:00 Peter PUSCHITZ

New Developments in Energy Efficiency and Energy Recovery for BOF Dry Dedusting Systems

6 11:00-11:20 LI Xinchuang Analysis on Potential of Energy Conservation of Chinese Steel Industry in the 13th Five-year Period

7 11:20-11:40 FENG Junsheng

Discussion on some key technical problems of sinter waste heat recovery and utilization with vertical tank

8 11:40-12:00 MA Guangyu Integrated steel industry energy flow analysis

9 12:00-12:20 ZOU Yin Control methods and Operation strategies for improving energy saving in a multi-cell fan based cooling tower system

K2-CN/EN Room B206

Oct.22, 13:30-17:35 Chairpersons：Charles XU，LI Xianwei

1* 13:30-14:00 Eiki KASAI Fundamental Approach to a Low-carbon Sintering Process of Iron Ores

2* 14:00-14:30 Charles XU An Overview of Biomass Utilization in Ferrous Metallurgy Processes

3 14:30-14:50 ZHU Rong Resource application and development of carbon dioxide in the ferrous metallurgy process

4 14:50-15:10 Oleszek SYLWIA

Low temperature recycling process of EAF dust with plastic wastes containing brominated flame retardants


5* 15:30-16:00 YE Guozhu Hot Slag Processing Aiming for Efficient Metal, Mineral and Energy Recovery

6 16:00-16:20 ZHONG Yiwei Recycling Use of Steel Dust Containing High Content of Potassium and Sodium

7 16:20-16:40 ZHU Renbo Physical and leaching properties of ceramic tiles with black pigment made from stainless steel plant dust

8 16:40-17:00 CAO Longhu Effect of CaO/SiO2 mass ratio on the precipitation behavior of spinel phase in stainless steel slag

9 17:00-17:20 Sun-Joong KIM Extraction of Phosphorous from Steelmaking Slag by Leaching

10 17:20-17:35 ZHENG Lianbin Application of Low Temperature and Waste Heat Recovery Technology

K3-CN/EN Room B206

Oct.23, 8:30-12:10 Chairpersons：LI Baoan , WEI wei

1* 8:30-9:00 LI Baoan Ammonia-containing wastewater reclamation with membrane absorption and vacuum membrane distillation

2* 9:00-9:30 Charles C. SORRELL

Multimodule System for Wastewater Treatment by Photocatalysis

3* 9:30-10:00 SUN Yuhan Suggestions about realizing low-carbon and green steel-making processes

4 10:00-10:20 ZHENG Zhuyi High efficiency coking wastewater treatment process


5* 10:40-11:10 YANG Ping Life Cycle Environmental Performance Assessment of Steel Products

6 11:10-11:30 LI Xianwei Research and Industrial Application on Sintering Flue Gas Comprehensive Treatment

7 11:30-11:50 ZHANG Mengmei

The sintering fingerprint and dioxins formation

8 11:50-12:10 XUE Xun Research and application of dust and nonferrous metallurgical slags in steel mills using RHF

Session L：Metallurgical Analysis L1-EN Room 204

Oct. 22, 8:30-12:00 Chairpersons: YIN Fuxing, Peter RUCHTI

1* 8:30-9:00 YIN Fuxing Investigation on interface inclusion and the bond behavior of hot-rolled stainless steel clad plates

2 9:00-9:20 XU Qiang Advanced in situ (s) TEM studies for metallic materials

3 9:20-9:40 J. GOULDEN The application of automated EBSD & EDS on SEM to the complete characterisation of steel samples

4 9:40-10:00 ZOU Yuming Mechanical properties of micro-phases along <001> direction of directionally solidified nickel-base super-alloy by in-situ nano-indentation.


5 10:20-10:40 GUAN Yun Effect of the microstructure substructure of low alloy wear-resistant steel on property

6 10:40-11:00 Peter RUCHTI Modern creep test for future material

7 11:00-11:20 ZHOU Yedong Research on low temperature embrittlement of advanced high strength steel

8 11:20-11:40 WANG Jin Identification and analysis of fracture in tensile and impact test of steel plate

9 11:40-12:00 DING Chen Failure analysis of the crack on the beam of the heavy truck

L2-CN Room 204

Oct. 22, 13:30-17:00 Chairpersons: Andrew SU，ZHANG Yi

1* 13:30-14:00 Andrew SU Advancement in “direct solid sampling” glow discharge mass spectroscopy (GDMS) for trace analysis of advanced alloys, engineering coatings, thin films and coarse surfaces

2 14:00-14:20 ZHAO Junwei Study and comparison on the determination methods of trace bismuth in low-alloy steel

3 14:20-14:40 DU Shiyi Study on the test of inductively coupled plasma mass spectrometry of trace elements in niobium in steel precision influence

4 14:40-15:00 SUN Juan Determination of trace As, Pb, As, Sb and Bi in pipe line steel by inductively coupled plasma mass spectrometry


5 15:20-15:40 YU Yuanjun Research on standard method of determination of W, Mo, and Nb in steels by inductively coupled plasma atomic emission spectrometry

6 15:40-16:00 ZHANG Jie Rapid determination of major and minor elements in coal ash by X-ray fluorescence spectrometric method

7 16:00-16:20 LI Dongling Determination of insoluble aluminum content in steels by laser-induced breakdown spectroscopy method

8 16:20-16:40 ZHANG Guoxing The evaluation of inclusions in slab by the focused ultrasonic method

9 16:40-17:00 MIAO Lede Qualitative and quantitative analysis of precipitate phases in nickel-based corrosion resistant alloys with different isothermal situation

Session M：Metallurgical Equipment and Engineering M1-CN/EN Room B504

Oct.22, 8:30-12:10 Chairpersons：Kiet TIEU, HE Yonghui

1* 8:30-9:00 ZENG Pan Performance Test and Analysis of Large Hydraulic Charging Equipment without Bell in BF Top

2* 9:00-9:30 SONG Yonghong Weakly Supervised CNNs based Surface Defect Localization and Recognition

3 9:30-9:50 PENG Tiegen BaoVision-WSIS-Online Surface Inspection System for High-speed Hot Wire

4 9:50-10:10 SU Yuanxiao The Study on The Way of Residual Stress Reduction in High Strength Steel


5* 10:30-11:00 Kiet TIEU An investigation into the wear behaviour of high speed steel work roll material under service conditions

6* 11:00-11:30 Chenn ZHOU Simulation and Visualization of Large Industrial Equipment

7 11:30-11:50 YEH HoTien Z-Mill Roll Shop Auto Roll Identification and Storage Yard management

8 11:50-12:10 PAN Shengbo RFID Tags and Auto-Labeling Machine for Heavy Plate Products Identification and Tracing

M2-CN Room 511

Oct.22, 8:30-12:10 Chairpersons：YANG Yuansheng, REN Zhongming

1* 8:30-9:00 ZHOU Yueming Research and Development of Electromagnetic Metallurgy Technology in Baosteel

2* 9:00-9:30 REN Zhongming Some Research Work on Electromagnetic Continuous Casting of Shanghai University

3* 9:30-10:00 LI Tingju Study on the horizontal electromagnetic continuous casting of copper alloy

4* 10:00-10:30 WANG Qiang State of the Art of New Technologies for Electromagnetic Metallurgy Based on Clean Steel Production


5 10:50-11:10 YANG Yuansheng Application of Low Voltage Pulsed Magnetic Field in Solidification of Metals

6 11:10-11:30 WU Cunyou Research of Induction Heating in BaoSteel

7 11:30-11:50 MA Yonglin Research on the change of Microstructure and Property of Rapid Induction Tempering X80 Pipeline Steel

8 11:50-12:10 HOU Xiaoguang Development of transverse flux induction heating for wide rang size strip

M3-CN/EN Room B504

Oct.22, 13:30-16:50 Chairpersons：WANG Zhe，PAN Zhong

1* 13:30-14:00 XU Binshi Equipment Ecological Maintenance and Mechanical Parts Remanufacturing

2* 14:00-14:30 WANG Zhe A Brief Overview of EAF Steelmaking Technology

3 14:30-14:50 Charlie MARTH Principle of Thermal Spray Nanotechnology and Applications of Nanostructured Coatings in Steel Industry

4 14:50-15:10 CHEN Zhanfu Research to constrains and dynamic characteristics of roll system for strip mill


5* 15:30-15:50 CHEN Jianbo Hydraulic Cylinder with Stepping Control of High Reliability Used in Continuous Caster

6 15:50-16:10 TAN Xihua Brief Introduction of Baosteel No.5 Continuous Caster Revamping Project

7 16:10-16:30 MA Shifeng Development of ECO- Cold Heading Steel Pickling & Coating Process Line

8 16:30-16:50 CHEN Hui Research of the Hot Blast Pipeline System Cracking of the large Capacity Blast Furnace

M4-EN/CN Room 511

Oct.22, 13:30-17:30 Chairpersons：LI Tingju, WANG Qiang

1* 13:30-14:00 Klaus TIMMEL Liquid metal modelling of continuous steel casting

2 14:00-14:20 CHEN Liang The System Integration and Application for the Electromagnetic Stirring Device of Continuous Casting in Baosteel

3 14:20-14:40 LEI Zuosheng Physical Modeling and Numerical Simulation of Electromagnetic Stirring in Slab Continuous Casting Mold

4 14:40-15:00 Jean LOVENS Induction and steel finishing lines : major trends end of 2015

5 15:00-15:20 DONG Anping Continues Electromagnetic Purification of Hot Dip Galvanized Zinc Melt


6* 15:40-16:10 WANG Engang Effect of Electromagnetic Stirring on Solidification Structure of Incoloy800HT Superalloy Strand

7 16:10-16:30 YUE Qiang Numerical simulation of Electromagnetic, Flow and Heat transfer for Tundish with Channel Induction Heating

8 16:30-16:50 HOU Yaxiong Electromagnetic Stirrer Technology & Application

9 16:50-17:10 JI Lingyun Development Trend and Thinking about the Technology of the Induction Heating Power Supply

10 17:10-17:30 Alex Yuntao Development Trends in Flow Control in the mold in slab casting

Session N(small forum)：Metallurgy Intelligent Management and Control N1-CN Room B503

Oct.22, 8:30-12:00 Chairpersons：SUN Yanguang , DU Bin

1* 8:30-9:00 PENG Yu Enabling Technologies in Intelligent Manufacturing and Development Path for China's Manufacturing Industry

2 9:00-9:30 SUN Yanguang Energy Solutions for Iron and Steel Companies Based on Synergic Management of Material and Energy Flow

3 9:30-10:30 Workshop

4 10:30-10:40 Coffee Break

5 10:40-11:10 DU Bin Research and Development of Intelligent Optimization Technologies for Baosteel Supply Chain System

6 11:10-12:00 Workshop

N2-CN Room B503

Oct.22, 13:30-17:30 Chairpersons：SUN Yanguang , DU Bin

1 13:30-14:00 HUO Jiazhen Smart Decisions on Iron and Steel Logistics

2 14:00-14:30 CONG Liqun Industrial Software Designed for Industry 4.0

3 14:30-15:50 Workshop


4 16:00-16:30 GUO Zhaohui Goal of Industry 4.0 in Iron and Steel Companies

5 16:30-17:30 Workshop

Session O：Information & Intelligence O1-CN/EN Room 100

Oct.22, 8:30-12:20 Chairpersons：FU Jing，LU Bin

1* 8:30-9:00 GAO Xuedong Big data analytics application methods

2 9:00-9:20 LI Xinchuang Key Issues of Iron and Steel Industry E-commerce Implementation

3 9:20-9:40 FU Jing Analysis, Recommendation and Utilization of Metallurgical Science and Technology Literature Resources

4 9:40-10:00 ZHOU Qunfang Comparative study of the influence of patentee before and after weighted processing— In the Field of global shale gas exploration and development technologies


5* 10:20-10:50 Paul BUTTERWORTH

Business analysis and report writing of CRU

6* 10:50-11:20 Lisa LEWIN The Global Macro Outlook

7 11:20-11:40 GU Jun Study on Competitor Products Analysis based on Ontology

8 11:40-12:00 WEI Jianxin Discussion on the countermeasures in central state-owned iron & steel enterprises patent level

9 12:00-12:20 ZHENG Rui Analysis on the development of marine equipment manufacturing industry and offshore platform steel demand

O2-CN Room 100

Oct.22, 13:30-17:20 Chairpersons：FU Jing，LU Bin

1* 13:30-14:00 ZHANG Lili Information intelligence services in the era of big data

2 14:00-14:20 WANG Gang The research status in China Steel patent layout NSSC

3 14:20-14:40 LIU Lanbing Strategic level information application of iron and steel enterprises in the big data era

4 14:40-15:00 ZHOU Yijun The Global Patents Analysis on Zn-Al-Mg Coated Steel Sheets


5* 15:10-15:40 LU Bin Construction of enterprise information service organization

6 15:40-16:00 WANG Nuo Iron and Steel Industry Listed Company Innovation Ability Evaluation Research in China

7 16:00-16:20 CHEN Yan R&D Progress on High Strength-ductility Balance TRIP Steel for Automobile

8 16:20-16:40 HE Hongyou Construction of Competitive Intelligence system for corporation in Big Data Era: a case study of CNCIC CI system

9 16:40-17:00 YIN Kang Research of Iron and Steel Ontology Constructing Method

10 17:00-17:20 LIU Dongdong Production status and development of special steels wire rod and bar in domestic and foreign industry

Session P：Near-net-shape continuous casting of steel P1-EN Room 216

Oct.22, 8:30-12:10 Chairpersons：FANG Yuan，Heinrich MARTI

1* 8:30-9:00 FANG Yuan Progress of strip casting in Baosteel and the future perspective

2* 9:00-9:30 Heinrich MARTI TRC and the direction the technology is expected to develop.

3* 9:30-10:00 Shimpei OKAYASU

Rolling technologies for direct strip casting at Ningbo Steel

4 10:00-10:20 ZHOU Jiangang Introduction to the control system in NBS project


5* 10:40-11:10 Christian CEERKENS

Belt Casting Technology BCT® – Process technology and operating results of the world's first industrial BCT® plant.

6* 11:10-11:40 LIU Zhenyu Microstructures and mechanical properties of the Mn-N alloyed lean duplex stainless steel processed by twin-roll strip casting

7* 11:40-12:10 DU Fengshan The design of split electromagnetic poles for side sealing structural for Twin roll strip casting

P2-CN/EN Room 216

Oct.22, 13:30-17:30 Chairpersons：WANG Guodong，Ferry MICHAEL

1* 13:30-14:00 WANG Guodong Future outlook of strip casting process

2* 14:00-14:30 Ferry MICHAEL Defect Formation Processes and Mechanisms during Twin Roll Strip Casting of Steel

3* 14:30-15:00 YANG Yuansheng Sub-rapid solidification microstructure evolution and control for strip casting

4 15:00-15:20 YU Yan Development of products in in Baostrip


5* 15:30-16:00 ZHANG Jieyu Simulation study on melt delivery system of twin-roll strip casting process

6* 16:00-16:30 ZHANG Xingguo Study of Continuous Casting Technology for Bulk Amorphous Plate

7 16:30-16:50 FAN Junfei The study and application of distributor system used in Baosteel strip casting

8 16:50-17:10 Pello URANGA Thin Slab Direct Rolling Modeling of Nb microalloyed steels

9 17:10-17:30 SONG ChangJiang Microstructure and mechanical properties of sub–rapidly solidified Fe–Mn based alloy strip

The poster display time: October 22nd 8:30-October 23th 12:00 Authors are required to stay near their posters for comments during coffee breaks.

Each attendees can choose registration on site or complete registration at http:/www.csmscon.com before October 10th , 2015.

On site Registration Oct.20th 9:00-22:00 Venue: Baolong Hotel,Shanghai Oct.21st 10:00-17:00 Venue:Kerry Hotel, Pudong, Shanghai Oct.22nd 8:30-17:00 Venue:Baosteel Talent Development

Institute

Registration Fee

Participants need to pay registration fee to attend the conference. Discount registration fee is available if received by October 10, 2015. Type By 10/10/2015 After 10/10/2015

Overseas guest 500 US$/person 600 US$/person

Overseas student 200 US$/person 250US$/person

Notes Student registrants will require a valid student ID to be presented during Conference Registration.

Method of Payment Bank Transfer: telegraphic transfer through your bank in US

dollars to: Beneficiary Bank:

INDUSTRIAL AND COMMERCIAL BANK OF CHINA BEIJING MUNICIPAL BRANCH WANG FU JING SUB-BRANCH OFFICE

Bank Address:NO.237 WANG FU JING STREET DONG CHENG DISTRICT BEIJING 100006 P.R. CHINA

Account No.: 0200000709089116848 SWIFT ADDRESS: ICBKCNBJBJM

Cash: Cash on the Registration Desk during Conference Registration.

Credit Card (VISA, MasterCard, Diners Club, American Express or JCB）

Notes No personal check will be accepted. The deadline of bank transfer will be on Oct. 10, 2015. In the Remittance List remitter needs to write:"CSM & BAC 2015"+name, employer/organization.（For example: "CSM & BAC 2015"+Peter BLECK, XX Corporation） The copy of the receipt for remittance should be shown on the Registration Desk during Conference Registration.

Accommodation is reserved at Baolong Hotel Shanghai. Participants need to complete Hotel Reservation Form and send email to [email protected] before September 30, 2015.

Airport to Hotel: There are two airports in Shanghai，which are shown in the map. Taxi is our recommended transportation for the first-time visitors. It costs approximately 170 RMB（ 220 RMB afetr 23:00） from Pudong International Airport and 80 RMB（ 100 RMB after 23:00） from Hongqiao International Airport to Baolong Hotel. If the taxi driver cannot understand where you want to go, please show him the Chinese name of the hotel as follows:

上海宝隆宾馆

虹口区逸仙路 180 号；电话：+86 ( 21 ) 3505 9666

Sponsorship is acceptable to give additional values. For details, please contact conference secretariat. Ms. LUO Guangmin Mr. DING Bo Tel: +86-10-65133925 Email：[email protected] Mr. ZHANG Duanyang Tel:+86-21-20658771

The Chinese Society for Metals Mr. DING Bo Tel：+86-10-65133925 Ms.LUO Guangmin(Registration) Tel：+86-10-65133925 Ms.SONG Qing Tel：+86-10-65121206 Fax：+86-10-65124122 E-mail:[email protected] Baosteel Group Corporation Building 0, 889 Fujin Road, Baoshan District Shanghai 201999, P.R. China Ms.WU Junjun (Registration) Tel: +86-21-26648593

Ms.ZHANG Min (Technical Secretary) Tel: +86-21-26648360 Ms. TUO Ximei Tel: +86-21-26649633 Fax: +86-21-20658442 E-mail: [email protected] Website: http://www.csmscon.com

MTM Expo 2015 (18th Shanghai Metallurgy Expo) Date: October 21-23, 2015 Venue: Shanghai New International Expo Centre (SNIEC) MTM Expo (Shanghai Metallurgy Expo) has been held since 1986 every two years, which is the largest event in metallurgy industry in Asia. For years, the Expo has gradually developed from a single field display platform into an international arena for providing all aspects display and interaction solutions for enterprises; and its industry reputation and increasingly intensive internationalization. Exhibition scale: 45,000㎡ 700 exhibitors 25,000 professional visitors

Organizers Chinese Society for Metals Baosteel Group Corporation Shanghai Society for Metals Co-organizer Shanghai Shenshi Exhibition Service Co., Ltd. Concurrent exhibitions Shanghai International Refractories Expo 10th Shanghai Tube Expo Shanghai Vanadium Titanium Industry Expo Shanghai International Wire Expo Theme pavilions Energy-saving Emission-reduction Technology Pavilion E-business Forum Universities and Institutions Pavilion Your contact: Ms. Nancy CAO, Ms. Helen ZHANG, Tel: +86-21-5283 8700 Ext. 802 Email: [email protected], [email protected] Website: www.metallurgyexpo.net

Date Technical Forum Organizer

October 21

Opening Ceremony Shanghai Society of Metals China high-end equipment manufacturing industry Forum

Shanghai Science and Technology Development Communication Exchanges Center

Internet plus steel——Construc steel service ecosystem

Ouyeel

Free electricity saving reformation service patterns on belt conveyor are carried out for steel plant with using the "energy-saving roller"

Beijing Yurunhua Science & Technology Developing Co., Ltd

Pump station targe consumes energy-efficient technology

Beijing IAO Science & Technology Development Co., Ltd

October 22

The innovation and development of steel electricity supplier

Ouyeel

The application for the e-business management in spare parts

Metallurgy Society of Hebei Province

Chemtura Grease Solution Chemtura Corporation

Invitation to Baosteel BAC 2015 1bac.baosteel.com/baosteel_bac4HTML/download/FinalCircular.pdf ·...

Documents

Transcript of Invitation to Baosteel BAC 2015 1bac.baosteel.com/baosteel_bac4HTML/download/FinalCircular.pdf ·...