Invacare Bed rail Selection chart

I n vac a r e ®

Bed rail Selection chart

As the leading producer of bed systems and components (bed, mattress and rails) to the home and long-term care industries, Invacare strives to ensure patient safety. The importance of proper patient assessment, correct installation and the ongoing review and maintenance of the complete bed system should never be overlooked. With millions of bed systems in both home and long-term care environments, awareness of the potential for entrapment is vital.

Bed Rail Entrapment can occur from issues with the bed, the rail or the mattress. Please note that replacing these rails will only address certain zones for potential entrapment. It is up to you, the provider, to ensure that your bed systems meet the FDA’s guidelines. As such, you will need to evaluate your inventory of beds and mattresses as well for compliance with the guidelines, especially as the three components (bed, rail and mattress) work together as a system.

Bed rail designs have changed over the years. Our goal is to inform you of these changes and request that you review your inventory of Invacare bed rails. If you currently use an older design, we ask that you stop using these and replace them with a newer design. The following pages depict some of the options available to you.

Potential Part Numbers: 6650 Replace with 6629

Note: 3 different designs exist Note: 6629 Rails utilize 7/8" tubing

Potential Part Numbers: 6629

Replace with part number 6629

Note: pre 2004, rails had 3 cross bars

Note: 2004 to present, rails have 4 cross bars

10.96 11.96

Half Length RailsPotential Part Numbers: 6630 pre 2003

Replace with 6630 current production

Note: pre 2003 rails had different dimensions and no spindle; from 2003 to present, dimensions have changed and an additional spindle was added to close the gap.

Full Length Rails

Potential Part Numbers: 6628, 6628-TSS

Replace with 6628, 6628-TSS, or 6629

Note: pre-2004 rails had 3 cross bars; 2004 to present rails have 4 cross bars

Note: 6628 Rails utilize 1" tubing

Invacare HOMecare DIvISIOn

Pre 2004 2004 – Present

OUt DAteD ImpROveD DeSIgn

3 Bar Design 4 Bar Design

11" Height 12" Height

Potential Part Numbers: IH5822, IH6802, and IH6803

Replace with IH6803A

5 1/2 TYP.

Potential Part Numbers: IH5744, IH5748, and IH5749

Replace with IH6803A, IH6808A, IH6815A, IH6816A

Note: If you have rails with a 5 1/2" spacing you should replace these with a different rail.

Note: Nylasar rails manufactured before June, 2005 had a 5 1/2" spacing between the rail attachment bolts. After June, 2005 the spacing was decreased to 5 1/4". While 5 1/4" spacing rails are suggested for use, they are no longer manufactured. If you need to replace 5 1/2" rails and do not currently have 5 1/4" rails, please replace with one of the following: IH6801A, IH6803A, IH6815A, IH6808A

5 1/2 TYP.

5.50 TYP.

5 1/4 TYP.

5 1/4 TYP.

5.25 TYP.

Invacare cOnTInUInG care DIvISIOnInvacare/Huntco Specific

5 1/2" Spacing 5 1/4" Spacing


Potential Part Numbers: IH5813, IH6807




Potential Part Numbers: IH5820, IH5830, IH5831, IH6805, IH6815, IH5821 and IH6806

Replace with IH6815A and IH6816A


Potential Part Numbers:IHARRLFUL, IHECRLFULL, IHARRLPAR, IHECRLPAR

Replace with current production in addition to Kit 71

Note: Use corner adapter kit to modify your rails

Note: Use only with Invacare® Solace® Prevention 2000 Series and higher mattresses

9902RR1-000-07CARROLL ASSIST RAIL WELDMENT - RIGHT11

DWGSPECIFICATIONTITLEQTY.ITM

VERETON NOISIVERETAD BY ECO

807PGPCASKROWDILOS NI NWARDER70 42 TPES

BNI 1 ETALP ROHCNA NETROHS )2 .0.12 SAW 0.02 MID )140 20 NAJ BW 534

A5.12 SAW 0.12 MID - 1 METI ETADPU30 80 LUJ BW 522

LERESAELER GED TNIAP WEN20 11 TCO BW 422

9932

RR1-010-26

1 OF 1

AC+

10/11/2002

DIMENSION IN IN INCHES - DO NOT SCALE

DRAWN BY:CHECKED BY:

CARROLL ASSIST RAIL PAINT - RIGHT

1/2/2004CREATED:

LONDON, ONT. N6E 1P5

DWG DATE:

-B.WELCH

SHEET

994 HARGRIEVE RD.

PHONE (519)659-1395

ANGLE +/- 0.25DWG.TITLE:

MAT'L:

PART:

ASME Y14.5M-1994

REV.

TOLERANCE X.X +/- 0.030 X.XX +/- 0.010 X.XXX +/- 0.005 X X/X +/- 1/32

RELEASED PRODUCTION

FILM BUILD 1.8 - 3.0 MIL

OR HENTZEN P80023TPN CARROLL BEIGE EPOXYERIE POWDER COATING #E103-G7 CARROLL EPOXY

NOTE: COATING SPECIFICATIONS

SURFACE PREP:PRE-TREAT WITH ZINC PHOSPHATE

PAINT:POWDER COAT COLOUR: SEMI GLOSS BEIGE

1

26.50

20.00

1.00

Uncontrolled Copy


Replace with current production if your rail looks like one pictured on the left side

Invacare cOnTInUInG care DIvISIOncarroll Healthcare Specific

2002-Present with Kit 71


Pre 2002

Invacare CorporationUSAOne Invacare WayElyria, Ohio 44035-4190(800) 333.6900

Canada570 Matheson Blvd. E.,Unit 8Mississauga, OntarioL4Z 4G4 Canada(800) 668.5324

©2011 Invacare Corporation. All rights reserved. Trademarks are identified by the symbols ™ and ®. All trademarks are owned by or licensed to Invacare Corporation unless otherwise noted. Specifications are subject to change without notification.Form No. 11-122110512

Invacare Bed rail Selection chart

Documents

Transcript of Invacare Bed rail Selection chart