INTRODUCTION - VLT Company Website Van Leeuwen Test ...Models VLT 120233/M5P/4: 15/12 ton, VLT...

2

How to find your way in our Product Catalogue.

Our Catalogue is divided in 9 sections; ................................................................page 1.) Introduction and index. ...................................................................................... 22.) Information on our stand-alone equipment for heavy vehicles: Roller Brake Testers............................................................................................. 3 Side Slip Testers, Boogie Rollers.........................................................................13 Axle Load Simulators .........................................................................................14 Play Detectors ....................................................................................................15 Air Pressure Transducers ...................................................................................163.) Information on our stand-alone equipment for light vehicles: Roller Brake Testers............................................................................................17 Road Contact Tester / Roller Brake Tester Combinations ..................................20 Road Contact / Suspension Testers, Side Slip Testers ........................................21 Overrun Brake Simulators, Play Detectors .........................................................22 Roller Brake Testers for motorcycles .................................................................23 Roller Brake Testers for 2 - 3 and light 4 wheelers ............................................244.) VLT Above and Undercarriage Keyboards ..........................................................255.) VLT Emission and Diesel Smoke Testers .............................................................266.) VLT Head Beam Testers ......................................................................................277.) VLT Speedometer / Taximeter Testers ............................................................288.) VLT, Chassis Dynamometer Smoke Testers..........................................................309.) VLT Integrated Test Lanes VLT Mobile Inspection Station ...........................................................................32

VLT Integrated Test Lanes ..................................................................................35

INTRODUCTION

Van Leeuwen Test Systems B.V., shortly known as VLT, has a track record of over 58+ years and is today one of the few companies which supplies State of the Art Vehicle Testing Equipment combined in fully integrated Test Lanes. These Test Lanes have a high level of Computer Automation, including Vehicle Tracking Systems, with a capacity of 20 to 25 vehicles or even more per Test Lane per hour with half the number of inspectors. Our clients tell us that the VLT Test Lanes are up to 50% faster.VLT has automated everything as much as possible, even the visual inspection. Above and Under Carriage are fully computer guided with less human influence and this means less errors by inspectors. But maybe the most important aspects for decision-makers are the user friendliness, the high throughput, the paperfree systems and minimum human influence - the machine makes the decision! Correct and true!Re-tests after failures are easy and quick! Only the fail items need to be re-tested: the computer system knows exactly what has failed and redirects the vehicle straight to the device of the Test Lane where the re-test has to be executed, simple and fast!But even more important for the operator is the high technical level and durability of the equipment, especially for high workloads. VLT also has equipment for vehicle testing stations and equipment for workshop use.We know from our customers that down time is very expensive and often gives the organization a bad name! VLT understands this and for our products the slogan is “only the best is good enough”. Our equipment is designed and built by experts for a high volume of work and minimum of maintenance to serve the operator and his clients.VLT has its own Research and Development Department to bring the high level of products even higher. VLT is definitely the “Innovator” in Professional Vehicle Test Lane Equipment for Annual Vehicle Testing in the last decade.In case you have plans to invest in Vehicle Test Lane Equipment, VLT definitely is your best choice! Let us, together with you, make your new test facilities!This catalogue offers you some of our solutions but is of course not all since VLT is strong in tailor made situations. Due to the size of our company we are fast in everything from design to delivery to any size of your order. Give us the opportunity to demonstrate our skills!VLT means value for money, every day again!VLT Professional Solution Providers for Vehicle Testing.

Best regards,Van Leeuwen Test Systems B.V.

Cornelis van LeeuwenManaging Director and Owner

3

BA

C

øD

VLT 14/16/20033 VLT 14/16/20233

VLT 120/140/160033 VLT 160233/LIFT

VLT 14/16333 VLT 14/16433

VLT 14/16/20033/LIFT VLT 14/16/20233/LIFT

VLT 16833/AGRI(inground placement)

Model A B C D max. kg (axle)VLT 120/140/160X33 800 2800 470 260 12/14/16000VLT 14/16/20X33 800* 3000* 470 260 14/16/20000VLT 14/16333 /400 800 3000 470 260 14/16000VLT 16833/AGRI 800** 3000** 670 260 16000* 800/3000 with subframe VLT 14007/T2, 1000/3200 with VLT 14003/T2** also available in 700/3500 mm.

VLT 120/140/160033- VLT 120/140/160233 Compact roller sets with 1000 mm rollers. Available with all rollers at same level, or with raised rear rollers. VLT 160233 also available with integrated lifting system.

VLT 14/16/20033 - VLT 14/16/20233Standard roller sets with 1100 mm rollers.Available with all rollers at same level, or with raised rear rollers.Also extra wide 24000 kg version available (with all rollers at same level).On request 1250 - 1400 - 1700 mm rollers.

VLT 14/16/20033/LIFT VLT 14/16/20233/LIFTThese are the same roller sets as above, but with an integrated axle lift. This allows you to quickly increase the axle weight for tandem axles (where one axle of the tandem is on the floor and one axle is on the rollers). You can also use the lift as an axle load simulator by tying the axle down with chains / belts and then use the lift.On request 1250 - 1400 - 1700 mm rollers.

VLT 14/16333 - VLT 14/16433Reduced height roller sets (360 mm high, 1100 mm rollers).Available with all rollers at same level, or with raised rear rollers.

VLT 16833/AGRIReduced height roller sets (360 mm high), suitable for inground or above ground use. Increased centre distance between rollers to allow testing of vehicles with very big tyres, such as agricultural vehicles.The above ground version is also available with 700 / 3500 mm testing width.

Standard for all Roller Brake Testers up to 20000 kg axle weight:

Separate relay box with electric components.

Readout cabinet, 800 x 1000 mm, with 2 large digitally controlled analogue pointers, bright coloured indicator lamps and an alphanumeric LED display or 32” TFT monitor.

Radio frequency remote control unit to control every function of the Roller Brake Tester.

32” LCD-TFT monitor

VLT 16833/AGRI(above ground installation)

VLT ROLLER BRAKE TESTERSfor heavy goods vehicles, trailers, buses

44

Our successful range “value for money” Brake Testers has created its own market all over the world. Two standard models, one with raised rear rollers and one with both rollers at the same level, completed with two special models with very low height for places where this is required or in those places where Roller Brake Testers need to be replaced with low height. These special models are only available in 14000 or 16000 kg version.

Read-out cabinet standard with 2 pointers side by side with large 100 mm LED display 8 or 16 digits, or at special request with 4 pointers, 2 low scale and 2 high scale. The read-out cabinets are wall mounted or at extra cost on pedestal or console for keyboard and printer. Rotating stands for floor mounting or wall mounting are also available.

All VLT Roller Brake Testers are standard equipped with real time RS 232 and Centronics printer ports. Besides the read-out cabinets, TFT-LCD monitors are available in 32”. We advise to install 2 monitors for truck/trailer combinations or articulated buses.

For Test Lane use fully automated Roller Brake Testers are available with VLT Test Lane Computer and Database. Please feel free to ask us for a customized quotation.

VLT x x 0 x x [ 22 standard no axle weighing [ 33 with 8 points axle weighing system

[ 0 standard model 640 mm high with rear rollers + 60 mm [ 00 compact model 550 mm high with rear rollers + 60 mm [ 2 standard model 640 mm high with all rollers + 40 mm [ 20 compact model 550 mm high, with all rollers +40 mm [ 3 special model 360 mm high with rear rollers + 60 mm [ 4 special model 360 mm high with all rollers + 40 mm [ 14 testing axle weight 14000 kg, drive-over weight 18000 kg [ 16 testing axle weight 16000 kg, drive-over weight 20000 kg [ 20 testing axle weight 20000 kg, drive-over weight 24000 kg

Options on VLT 14/16/20xxx models:VLT 14134 Two-speed version 2.6/5.2 km/hour.VLT 14135 Counterwise rotating of the roller sets for 4x4 vehicles operated by remote control (all models).VLT 14138 Roller locking device, to drive easily out of the roller set (all models). Best option!VLT 16132 Option for two measuring directions, including counter-rotating roller sets, which means that vehicles can be tested in both directions. Only for Roller Brake Testers with rollers at the same level (VLT xx222/33 and VLT xx422/33 models).

Key to the VLT numbers, see how easy you can get used to this

VLT ROLLER BRAKE TESTERSHeavy duty models VLT 14000/M5P, VLT 16000/M5P and VLT 20000/M5P series

[2] Roller set with rollers at same level

[0] Roller set with raised rear rollers

[3] Roller set with raised rear rollers(only 14 ton - 16 ton)

[4] Roller set rollers at same level(only 14 ton - 16 ton)

NATO Stock Number W3/4910-99-474-5325

read-out cabinet 0 - 2000 / 0 - 6000 kgf,control lights,16 digits, 100 mm203350694

wheel trolley for read out cabinet169401

relay box,emergency stop(wall-mounted)

16004877

radio remote control

roller sets,incl. roller locking

device and axle weighing

service brake,parking brake,

applied testRollers 260 x 1800 mm

247336480/1800

controller,TFT screen,keypad

keyboard

printer compartment

PC compartment

2073307024

VLT 24 ton special Roller Brake Tester MOD/UK

5

HEAVY GOODS VEHICLES • BUSES • TRAILERS • AGRICULTURAL VEHICLES

BRAKE TESTER MODEL SERIES

MAX. AXLE WEIGHT (kg)

VLT 120/140/160X00 12/14/16000

VLT 14/16/20X00 14/16/20000

special models:

AGRI models 16000

360 mm deep models 14/16000

above ground models 14/16000

NEW RANGE OF VLT HEAVY ROLLER BRAKE TESTERSModels VLT 120033/M5P/4: 15/12 ton, VLT 140033/M5P/4: 16/14 ton, VLT 160033/M5P/4: 18/16 tonModels VLT 120233/M5P/4: 15/12 ton, VLT 140233/M5P/4: 16/14 ton, VLT 160233/M5P/4: 18/16 ton

Special more compact version, suitable for up to 100 tests a day.Can be installed in existing pits or just in concrete pits!

Technical specifications: models with raised rear rollers models with all rollers at same level

Model VLT 120033/M5P/4 VLT 140033/M5P/4 VLT 160033/M5P/4 VLT 120233/M5P/4 VLT 140233/M5P/4 VLT 160233M5P/4Measuring range low 0 - 6000 N 0 - 7000 N 0 - 8000 N 0 - 6000 N 0 - 7000 N 0 - 8000 NMeasuring range high 0 - 30000 N 0 - 35000 N 0 - 40000 N 0 - 30000 N 0 - 35000 N 0 - 40000 NMax. axle weight with 50% braking 12000 kg 14000 kg 16000 kg 12000 kg 14000 kg 16000 kgMaximum drive-over weight 15000 kg 16000 kg 18000 kg 15000 kg 16000 kg 18000 kgTesting speed 2.6 km/h 2.6 km/h 2.6 km/h 2.6 km/h 2.6 km/h 2.6 km/hExtra testing speed 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/hRoller dimensions 260 x 1000 mm 260 x 1000 mm 260 x 1000 mm 260 x 1000 mm 260 x 1000 mm 260 x 1000 mmCentre-to-centre rollers 470 mm 470 mm 470 mm 470 mm 470 mm 470 mmRollers above floor level, front / rear 0 / 60 mm 0 / 60 mm 0 / 60 mm 40 /40 mm 40 / 40 mm 40 / 40 mmMinimum / maximum test width with VLT 13007T2

800 x 2800 mm 800 x 2800 mm 800 x 2800 mm 800 x 2800 mm 800 x 2800 mm 800 x 2800 mm

Minimum / maximum test width with VLT 13037T2




Facility for other testing width yes yes yes yes yes yesMotor power (2x) 11 kW 11 kW 11 kW 11 kW 11 kW 11 kWElectr. supply at 400 V, 3 Phase, 50 Hz 63 Amps delay 63 Amps delay 80 Amps delay 63 Amps delay 63 Amps delay 80 Amps delayWeight measuring system range 0 - 15000 kg 0 - 16000 kg 0 - 18000 kg 0 - 15000 kg 0 - 16000 kg 0 - 18000 kgAlphanumeric display 16 digits 16 digits 16 digits 16 digits 16 digits 16 digitsRoller set dimensions (2x) all models 1300 x 790 x 550 mm all models 1300 x 790 x 550 mmNett weight 1645 kg 1685 kg 1725 kg 1645 kg 1685 kg 1725 kgModel available with integrated lifting device

no no no no no yes

Optional 32” TFT monitorOptional Entry Console with 19” monitor and optional keyboard and printerElectrical motors / gear boxes under the rollers

6

Technical specifications: models with rear rollers raised by 60 mm models with all rollers raised by 40 mm

Model VLT 14033/M5P/4 VLT 16033/M5P/4 VLT 20033/M5P/4 VLT 14233/M5P/4 VLT 16233/M5P/4 VLT 20233M5P/4Measuring range low 0 - 7000 N 0 - 8000 N 0 - 10000 N 0 - 7000 N 0 - 8000 N 0 - 10000 NMeasuring range high 0 - 35000 N 0 - 40000 N 0 - 50000 N 0 - 35000 N 0 - 40000 N 0 - 50000 NMax. axle weight with 50% braking 14000 kg 16000 kg 20000 kg 14000 kg 16000 kg 20000 kgMaximum drive-over weight 18000 kg 20000 kg 22000 kg 18000 kg 20000 kg 22000 kgTesting speed 2.6 km/h 2.6 km/h 2.6 km/h 2.6 km/h 2.6 km/h 2.6 km/hExtra testing speed 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/hRoller dimensions 260 x 1100 mm 260 x 1100 mm 260 x 1100 mm 260 x 1100 mm 260 x 1100 mm 260 x 1100 mmCentre-to-centre rollers 470 mm 470 mm 470 mm 470 mm 470 mm 470 mmRollers above floor level, front / rear 0 / 60 mm 0 / 60 mm 0 / 60 mm 40 /40 mm 40 / 40 mm 40 / 40 mmMinimum / maximum test width with VLT 14007T2






Facility for other testing width yes yes yes yes yes yesMotor power (2x) 11 kW 11 kW 11 kW 11 kW 11 kW 11 kWElectr. supply at 400 V, 3 Phase, 50 Hz 63 Amps delay 63 Amps delay 80 Amps delay 63 Amps delay 63 Amps delay 80 Amps delayWeight measuring system range 0 - 18000 kg 0 - 20000 kg 0 - 22000 kg 0 - 18000 kg 0 - 20000 kg 0 - 22000 kgAlphanumeric display 16 digits 16 digits 16 digits 16 digits 16 digits 16 digitsRoller set dimensions (2x) all models 1450 x 890 x 640 mm all models 1450 x 890 x 640 mmNett weight 2320 kg 2420 kg 2470 kg 2320 kg 2420 kg 2470 kgModel available with integrated lifting device no yes no no yes yes

[2] Roller set with rollers at same level

Optional 32” TFT monitor

Standard read-out

VLT EXTRA HEAVY ROLLER BRAKE TESTERSModels VLT 14033/M5P/4: 18/14 ton, VLT 16033/M5P/4: 20/16 ton, VLT 20033/M5P/4: 24/20 ton Models VLT 14233/M5P/4: 18/14 ton, VLT 16233/M5P/4: 20/16 ton, VLT 20233/M5P/4: 24/20 ton

[0] Roller set with raised rear rollers

Available with 32”TFT monitorOptional Entry Console with 19” monitor and optional keyboard and printerElectrical motors / gearboxes under the rollers

7

Model VLT 160233/100 Compact/M5P/LIFT

VLT 160233/110 Compact/M5P/LIFT

VLT 16233/ HEAVY/M5P/LIFT

VLT 20233/ HEAVY/M5P/LIFT

Measuring range low 0 – 8000 N 0 – 8000 N 0 – 8000 N 0 – 10000 NMeasuring range high 0 – 40000 N 0 – 40000 N 0 – 40000 N 0 – 50000 NMax. axle weight with 50% braking

16000 kg 16000 kg 16000 kg 20000 kg

Maximum drive over weight 18000 kg 18000 kg 18000 kg 22000 kgTesting speed 2,6 km/h 2,6 km/h 2,6 km/h 2,6 km/hExtra testing speed (Optional) 2,6 / 5,2 km/h 2,6 / 5,2 km/h 2,6 / 5,2 km/h 2,6 / 5,2 km/hRoller dimensions 260 x 1000 mm 260 x 1100 mm 260 x 1100 mm 260 x 1100 mmCentre to centre rollers 470 mm 470 mm 470 mm 470 mmRollers above floor level, all 40 mm 40 mm 40 mm 40 mmMinimum / Maximum test depending sub frame, but mostly

800x2800 mm or 1000x3000 mm

800x3000 mm or 1000x3200 mm

800x3000 mm or 1000x3200 mm

800x3000 mm or 1000x3200 mm

Motor power 2 x 11 Kw 2 x 11 Kw 2 x 11 Kw 2 x 11 KwElect. Supply at 400 V, 3 phase, 50 Hz

63 Amps delay 63 Amps delay 63 Amps delay 80 Amps delay

Weight of the Roller Brake Tester

1900 kg 1970 kg 2430 kg 2640 kg

Lifting system and capacity Yes, 18000 kg Yes, 18000 kg Yes, 20000 kg Yes, 20000 kgMotor power of Lifting system 3 Kw 3 Kw 3 Kw 3 KwElect. Supply at 400 V, 3 phase, 50 Hz

16 Amps delay 16 Amps delay 16 Amps delay 16 Amps delay

Lifting height Roller set Lifting system

150 mm 150 mm 180 mm 180 mm

Lifting system capacity adjust-able

Yes, by RF remote

Yes, by RF remote

Yes, by RF remote

Yes, by RF remote

Technical specifications lift system LD as part of Roller Brake Tester:

ROLLER BRAKE TESTER WITH INTEGRATED LIFTING DEVICE for using as Universal Roller Brake Tester suitable for normal Roller Brake Testing,

Freelifting of the axle and/or Axle Load Simulation “all-in-one”

For this Universal Roller Brake Tester, VLT has designed a special lifting device, installed as part of the roller sets, which gives this Roller Brake Tester all the flexibility you need.

A. Normal brake testing like a standard Roller Brake Tester.B. Lifting one axle to increase the testing weight by factor 1 to 2 / 1 to 3.C. Use as Axle Load Simulator by tying down the chassis by chain/belts and lifting the Lifting System by using the remote control of the Roller Brake Tester to predetermined axle weight.

Lifting device is available with a high speed hydraulic pump, with proportional valve system for accurate axle weight adjustment.

VLT supplies Roller Brake Tester as part of our Compact and Heavy duty models with Integrated Lift System.

8

Standard read-out

Optional 32” TFT monitorRear roller raised by 60 mm

Electrical motors in front of the rollers

Technical specifications special models 360 mm high:

Model VLT 14333/ M5P

VLT 16333/ M5P

VLT 14433/ M5P

VLT 16433/ M5P

VLT 16833/M5P/AGRI VLT 16833/M5P/ABGR/AGRI

Measuring range low 0 - 7000 N 0 - 8000 N 0 - 7000 N 0 - 8000 N 0 - 8000 N 0 - 8000 NMeasuring range high 0 - 35000 N 0 - 40000 N 0 - 35000 N 0 - 40000 N 0 - 40000 N 0 - 40000 NMax. axle weight with 50% braking 14000 kg 16000 kg 14000 kg 16000 kg 16000 kg 16000 kgMaximum drive-over weight 18000 kg 20000 kg 18000 kg 20000 kg 20000 kg 20000 kgTesting speed 2.6 km/h 2.6 km/h 2.6 km/h 2.6 km/h 2.6 km/h 2.6 km/hExtra testing speed 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/h 2.6 - 5.2 km/hRoller dimensions 260 x 1100 mm 260 x 1100 mm 260 x 1100 mm 260 x 1100 mm 260 x 1100 mm 260 x 1100 mmCentre-to-centre rollers 470 mm 470 mm 470 mm 470 mm 670 mm 670 mmRear roller raised by 60 mm 60 mm - - - -All rollers raised by - - 40 mm 40 mm 40 mm 40 mmMinimum / maximum test width (with VLT 14009)

800 x 3000 mm 800 x 3000 mm 800 x 3000 mm 800 x 3000 mm 800 x 3000 mm(with VLT 14079/T2/680)

800 x 3000 mm(no subframe)

Minimum / maximum test width (with VLT 14004)

1000 x 3200 mm 1000 x 3200 mm 1000 x 3200 mm 1000 x 3200 mm

Facility for other testing width yes yes yes yes yes yesMotor power (2x) 11 kW 11 kW 11 kW 11 kW 11 kW 11 kWElectr. supply at 400 V, 3 Ph, 50 Hz 63 Amps delay 63 Amps delay 63 Amps delay 63 Amps delay 63 Amps delay 63 Amps delayWeight measuring system range 0 - 16000 kg 0 - 18000 kg 0 - 16000 kg 0 - 18000 kg 0 - 20000 kg 0 - 20000 kgAlphanumeric display 100 mm 16 digits 16 digits 16 digits 16 digits 16 digits 16 digitsRoller set dimensions (2x) all models (2x) 1450 x 1350 x 360 mm (2x) 1450 x 1550 x 360 mm 3120 x 1550 x 360 mm

(3720 x 1550 x 360 mm with 1400 mm rollers)

Net weight 2180 kg 2185 kg 2180 kg 2185 kg 2325 kg 2490 kg (2740 kg)

All rollers raised by 40 mmElectrical motors in front of the rollers

[3] Roller set with raised rear rollers [4] Roller set rollers at same level

VLT EXTRA HEAVY DUTY ROLLER BRAKE TESTERS SPECIAL 360 MM HIGHModels VLT 14333/M5P: 18/14 ton, VLT 16333/M5P: 20/16 tonModels VLT 14433/M5P: 18/14 ton, VLT 16433/M5P: 20/16 ton

Models VLT 16833/M5P/AGRI: 20/16 ton

AGRI models

360

Note: Drive-on/off ramps are optionalABGR/AGRI model

AGRI model

670470470

9

CONFIGURATION 1 VLT16233M5P/4/RO 80X100

CONFIGURATION 2 VLT16233M5P/4/TFT 32”

CONFIGURATION 3 VLT16233M5P/4/TFT19”/CON/TFT 32”

service brake,parking brake

CONFIGURATION 4 VLT16233M5P/4/TFT19”/CON/TR-O 80X100

CONFIGURATION 5 VLT16233M5P/4/TFT19”/CON/TOUGHPAD

controller consoleread-out / display 0 - 8 / 0 - 40 kN,control lights,16 digits, 90 mm

optionalpedestal, turn able column VLT 0955

RF remote control263618


160031006

roller sets,incl. axle weighing

service brake,parking brake182334454

32” TFT/LCD monitor

VLT 0832

pedestal, VLT 0901/2000



160031006



controller box

08003201

32” TFT/LCD monitor

VLT 0832




160031006



controller,TFT screen,keypadVLT 0847/52

keyboard

printer compartment

PC compartment


keyboard

printer compartment

PC compartment(fully lockable)

read-out / display 0 - 8 / 0 - 40 kN,control lights,16 digits, 90 mm

optionalpedestal, turn able column VLT 0955



160031006


182334454

VLT Toughpadfor wireless remote control and readout


keyboard

printer compartment

PC compartment(fully lockable)


160031006


182334454


10

CONFIGURATION 6 VLT16233M5P/4/TFT19”/CON/TFT32” /+TOUGHPAD

CONFIGURATION 7 VLT16233M5P/4/TFT19”/CON/R-O 80X100 /+TOUGHPAD

CONFIGURATION 8 VLT16233M5P/4/TFT19”/CON/TFT32”/R-O 80X100 /+TOUGHPAD

CONFIGURATION 9 VLT16233M5P/4/TFT19”/CON/TFT32” 2X


keyboard

printer compartment

PC compartment

32” TFT/LCD monitorVLT 0832


VLT Toughpad for wireless remote control and readout

relay box, emergency stop(wall-mounted)

160031006



182334454


keyboard

printer compartment

PC compartment


optional pedestal, turn able column VLT 0955



160031006



182334454


keyboard

printer compartment

PC compartment


optional pedestal, turn able column VLT 0955



160031006



182334454




keyboard

printer compartment

PC compartment





160031006



182334454

CONFIGURATION 10 VLT16233M5P/4/TFT19”/CON/TFT32” 2Xcontroller,TFT screen,keypadVLT 0847/52

keyboard

printer compartment

PC compartment





160031006



182334454

11

Roller Brake Tester Series Inspection Pit Axle Load Simulator Rollerset Lift Subframe

VLT 120/140/160X00 ü ü û VLT 13003/T2

VLT 120/140/160X00 ü û û VLT 13007/T2

VLT 120/140/160X00 û û û VLT 13037/T2

VLT 14/16/20X00 ü ü û VLT 14003/T2

VLT 14/16/20X00 ü û û VLT 14007/T2

VLT 14/16/20X00 û û û VLT 14027/T2

VLT 14/16/20X00 ü û ü VLT 16273/T2

VLT 14/16/20X00 ü ü ü VLT 16273/T2/P2

VLT 14/16/20X00 û û ü VLT 16276/T2

VLT 14/16300 /400 ü ü û VLT 14004/T2

VLT 14/16300 /400 ü û û VLT 14009/T2

VLT 14/16300 /400 û û û VLT 14079/T2

SubframesVLT advises the use of a subframe for installing the roller sets into the concrete floor.All VLT subframes are robot welded and then hot dipped galvanised.

for inspection pit, no load simulator,

no rollerset lift (VLT 13007T2, VLT 14007/T2)

for inspection pit, with load simulator,

no rollerset lift (VLT 13003T2, VLT 14003/T2)

no inspection pit, no load simulator,

no rollerset lift,with optional safety barriers

(VLT 13037T2, VLT 14027/T2)


with rollerset lift,(VLT 16273/T2/P2)


for reduced height rollersets,(VLT 14004/T2)

12

SPECIALLY DEVELOPED MODELS FOR THE UNITED KINGDOM MARKETHeavy goods vehicles, buses, trailers but also cars, vans and light goods vehicles

can be professionally tested on our VLT 16000/M5P/H4/CON modelsAll our UK VLT 16000 series have applied brake test functionality and are fully computerized with infra-red remote control for the ONE man operation on the 16622/M5P/H4/CON and 16633/M5P/H4/CON models. Our models VLT 16633/M5P/H4/CON and VLT 16733/M5P/H4/CON (the VI machine) are equipped with an 18 ton axle weighing system for fast and very accurate testing and diagnostic analyses of vehicle braking systems. In the UK we have our own factory trained service organisation for warranty and after-sales maintenance and calibration.

Our UK headquarters

Technical specifications:

Model VLT 16622/M5P/H4/CON VLT 16633/M5P/H4/CONMeasuring range low 0 - 800 kgf 0 - 800 kgfMeasuring range high 0 - 4000 kgf 0 - 4000 kgfAxle weight with 50% braking 16000 kg 16000 kgMaximum drive-over weight 20000 kg 20000 kgTesting speed 1.3 / 2.6 km/h 1.3 / 2.6 km/hRoller dimensions 260 x 1100 mm 260 x 1100 mmCentre-to-centre rollers 470 mm 470 mmAll rollers raised by 40 mm 40 mmMotor power (2x) 5.5 / 11 kW 5.5 / 11 kWElectr. supply 63 Amps 63 AmpsRoller locking device optional standardFacility for extension to VLT 16633/M5P/H4/CON -Weight measuring system - 18000 kgAlphanumeric display 16 digits (100 mm) 16 digits (100 mm)Dimensions roller sets (2x) all models 1450 x 890 x 640 mmOn request available with lift as model not available VLT16633/M5P/H4/CON/LIFT

SPECIAL UK RANGE OF HEAVY DUTY ROLLER BRAKE TESTERSVLT 16733/M5P/H4/CON - VLT 20733/M5P/H4/CON- VLT 24733/M5P/H4/CON

This unit can conduct the applied brake test and is the official Roller Brake Tester used by the Vehicle Inspectorate*.We offer you an identical system including the licence to use the DVSA database with a PASS/FAIL assignment.


3/4 Middle Slade • Buckingham Ind. Park • Buckingham • Bucks MK18 1WA • United KingdomTel. +44 (0) 1280 822488 • Fax. +44 (0) 1280 822489

Model VLT 16733/M5P/H4/CON VLT 20733/M5P/H4/CON VLT 24733/M5P/H4/CONMeasuring range low 0 - 800 kgf 0 - 1000 kgf 0 - 2000 kgfMeasuring range high 0 - 4000 kgf 0 - 5000 kgf 0 - 6000 kgfAxle weight with 50% braking 16000 kg 20000 kg 24000 kgMaximum drive-over weight 20000 kg 24000 kg 28000 kgTesting speed 1.3 / 2.6 km/h 1.3 / 2.6 km/h 1.15 / 2.3 km/hRoller dimensions 260 x 1100 mm 260 x 1100 mm 260 x 1800 mmCentre-to-centre rollers 470 mm 470 mm 470 mmAll rollers raised by 40 mm 40 mm 40 mmMotor power (2x) 5.5 / 11 kW 5.5 / 11 kW 5.5 / 11 kWElectr. supply 80 Amps 80 Amps 80 AmpsWeight measuring system 18000 kg 24000 kg 28000 kgAlphanumeric display 16 digits 16 digits 16 digitsComputer database of approx. >14,300 vehiclesComputer i3 - 3.7 GHz, HDD 160 Gb, incl. Windows 7 ProfessionalMonitor TFT-LCD 19” On request available with lift VLT 16733/M5P/H4/CON/LIFT not available not available

V L Test Systems Ltd.

VLT 16733/VI model

We have manufactured and installed 162 units for the UK Vehicle Inspectorate, an Executive Agency of the Department of Transport and early 2016 sold approx. 1500 more units to private companies.

An ultra-modern HIGH TECH concept, developed by VLT in close co-operation with officials of the Vehicle Inspectorate.

*Renamed to VOSA in 2003, renamed to DVSA in 2014

Optional 32” TFT overhead monitor

VLT 16/20/24733 /M5P/H4/CON

VLT 16622/33 /M5P/H4/CON

13

VLT SIDE SLIP TESTERSVLT 3942/20 and VLT 3943/20

FOR HEAVY GOODS VEHICLES AND BUSES

VLT supplies a wide range of Side Slip Testers for heavy vehicles. Robust construction for long life span, especially designed for their special purpose and specifications.

The VLT Side Slip Testers are connected to a VLT Roller Brake Tester controller and displayed on the alphanumeric display or on a large TFT-LCD monitor, depending on the configuration of the system.

VLT FREE ROLLER SETS (BOOGIE ROLLERS)VLT offers two types of free roller sets, developed for intensive and heavy use in automobile Test Stations.

There are two models; the first one is a 8000 kg three rollers pair and the second one is a 16000 kg four rollers pair. Both models have a hydraulic lifting system between the rollers and a Roller Locking System for safe driving over the rollers when not in use, and for easy driving out of the rollers after use of the free rollers.

Free rollers are needed for testing speed on Speedometers for vehicles with double drive axles and can be used for older types of vehicles with double drive rear axles in combination with a transmission hand brake on the propeller shaft. On modern vehicles transmission handbrakes are no longer installed.

The VLT free roller sets have an aluminium coating on the rollers as corrosion protection. Again, VLT decided to use the more expensive hydraulic lifting and braking system instead of the more common pneumatic system because the hydraulic system is more powerful and more reliable.

Normally the VLT Speedometer and the VLT free roller set share the same hydraulic pump and are controlled by the VLT Speedometer controller.



Model VLT 3942/20 VLT 3943/20Linear up to wheel load of 6500 kg 6500 kgMaximum drive-over weight (wheel) 10000 kg 10000 kgDimensions of drive-over plate 950 x 800 mm 950 x 800 mmDimensions of compensation plate 245 x 800 mm 245 x 800 mmMeasuring range toe in / toe out -20 / 0 / +20 mm/m

Contact sensor drive-in / drive-out no yes, twoin and outRigid counter plate opposite VLT 39411 VLT 39411Optional subframe VLT 3908 VLT 3909

ONE MODEL FOR STAND-ALONE AND/OR TEST LANE USE

VLT 8103 VLT 16104

Maximum testing speed standard 120 km/h 100 km/hMaximum testing speed short time 140 km/h 120 km/hNumber of rollers each side 3 4Roller dimensions 238 x 950 mm 238 x 1100 mmCentre-to-centre rollers 290 mm 290 mmWorking length (driving direction) 580 mm 870 mmMaximum testing weight (axle) 8000 kg 16000 kgMaximum drive-over weight (axle) 10000 kg 20000 kgLifting / braking system rollers hydraulic hydraulicHydraulic supply from speedometer pump from speedometer pumpRoller set dimensions (2x) (w x l x d) 1280 x 1015 x 640 mm 1430 x 1255 x 640 mmApprox. nett weight 1990 kg 2660 kg

HYDRAULIC PUMP OPTION (IF NOT IN COMBINATION WITH VLT SPEEDOMETER TESTER)Hydraulic pump unit 400 Volt, 3 Ph 3.0 kW 3.0 kW

Speedometer tester Free Roller Set Roller Brake Tester

Monitor display (Test Lane version)

14

VLT AXLE LOAD SIMULATORS

Technical specifications (classic Load Simulator):

Model VLT 18640 VLT 18660 VLT 18630Maximum pulling force 4000 kg 6000 kg 10000 kgRegulated between 500 - 4000 kg 600 - 6000 kg 1000 - 10000 kgCylinder diameter ø 60 mm ø 70 mm ø 90 mmCylinder stroke 250 mm 250 mm 250 mmNumber of cylinders 2 2 2Motor power 3.0 kW 3.0 kW 3.0 kWElectrical supply 230 / 400 V, 3 Ph, 50 HzMaximum hydraulic pressure 100 bar 115 bar 100 barTie down type belts belts belts / chainsModels for connecting to VLT 9054 PRC Play Detector

VLT 18540 VLT 18560 VLT 18530

VLT AXLE load simulators (classic way)A range of three different Axle Load Simulators is available from 4000 kg - 6000 kg and 10000 kg pulling force by two dual action hydraulic cylinders.

These three models can be offered with their own hydraulic pump or can be connected to our VLT 9054/MK2 Play Detector pump unit which has an extra valve set for connecting one of the Load Simulators.

Load adjustment through proportional pressure regulated valve.

Classic way

VLT new way of load simulation

Please see page 7

Load Simulation by use of RBT Lifting Device (page 7)

Load Simulation by use of RBT Lifting Device (page 7)

Classic way Load Simulator

15

VLT PLAY DETECTORS

Plate left Plate rightVLT 9052 offers manual or automated

program cycles of more than 16 movements


Plate left Plate rightVLT 9043/EURO has

8 movements of the plates

Model VLT 9043/EURO VLT 9052/PR/CR VLT 9054/PRC/CRMaximum axle weight 20000 kg 20000 kg 20000 kgMaximum wheel weight 10000 kg 10000 kg 10000 kgTotal maximum movement 200 mm 200 mm 200 mmMaximum movement each side 100 mm 100 mm 100 mmHorizontal force, opposite 60 kN 60 kN 60 kNHorizontal force, on each plate 30 kN 30 kN 30 kNCars, light goods vehicle program no yes yesHeavy goods vehicle, buses program yes yes yesExtra connection port for load simulator no no yesSpecial steering facilities no no noPit dimensions all models 725 x 985 x 160 mm, use subframe VLT 9005/T2 or VLT 9006/T2Motor power 3.0 kWElectrical supply 230 / 400 V, 3 Ph, 50 HzAutomated program cycles no yes yesManual program yes yes yesRemote control / hand lamp by cable cable remote or radio frequencyMovement of the plates 8 >16 >16

VLT play detectorsWe offer our Extremely Heavy Tolerance Play Detectors with hydraulic pump unit. Large movements, low maintenance, easy to operate, mostly by radio frequency controlled remote control including models with automatic program cycles besides manual operation.

Special model VLT 9054/PRCVLT supplies its special model VLT 9054, which has the same specifications as the VLT 9052, but the hydraulic pump unit has an extra valve set for connection of one of the VLT Load Simulators.

16

TECHNICAL SPECIFICATIONS

VLT 1032 Pedalforce Range 0-1000 Newton Cable length 12 meters

VLT 1063 Air pressure Range 0-20 BAR Cable length 16 meters

VLT AIR PRESSURE TRANSDUCERS, VLT PEDAL FORCE TRANSDUCERS

New Radio Frequency Transducers for Air Pressure and Pedal Force.

We are proud to offer you our recently developed new range of transducers, special for Air Pressure Measurement of Air Brakes Systems. We can offer very Basic Systems with only two, three, four, etc. Air Transducers up to three Sets up to six (6) Air Transducers in one Vehicle Test Lane. This is very efficient at Vehicle Test Lanes with high throughput.

We can supply you special sets for time measurement of raise and fall time of Air Pressure

Low cost Cable Transducer

As low cost version we offer you our cable connected Transducers VLT 1032 and VLT 1063.

Combination Sets Air Pressure Transducers:VLT 1072/M contains: 1 (one) Basic MPU Controller kit 1 (one) TFT - LCD 15” Monitor 2 (two) R.F. Air Pressure Transducers VLT 1064/M

VLT 1073/M contains: 1 (one) Basic MPU Controller kit 1 (one) TFT - LCD 15” Monitor 3 (three) R.F. Air Pressure Transducers VLT 1064/M

VLT 1074/M contains: 1 (one) Basic MPU Controller kit 1 (one) TFT - LCD 15” Monitor 4 (four) R.F. Air Pressure Transducers VLT 1064/M

VLT 1075/M contains: 1 (one) Basic MPU Controller kit 1 (one) TFT - LCD 15” Monitor 5 (five) R.F. Air Pressure Transducers VLT 1064/M

VLT 1076/M contains: 1 (one) Basic MPU Controller kit 1 (one) TFT - LCD 15” Monitor 6 (six) R.F. Air Pressure Transducers VLT 1064/M

Special configurations for Vehicle Test Lanes use.For example with a total of 12 (twelve) Air Transducers, easily to configure by yourself in two or three kits of 3 - 4 - 5 or 6. Very flexible and easy to use. VLT 10712/M contains: 1 (one) Basic MPU Controller kit 1 (one) TFT - LCD 15” Monitor 12 (twelve) R.F. Air Pressure Transducers VLT 1064/MAny other configuration and number of Air Transducers up to 18 possible. (Please ask us)

Combination Sets Pedal Force and Air Pressure Transducers:VLT 1082/M contains: 1 (one) Basic MPU Controller kit 1 (one) TFT - LCD 15” Monitor 1 (one) R.F. Pedal Force Transducer VLT 1034/M 1 (one) R.F. Air Pressure Transducers VLT 1064/M

VLT 1083/M contains: 1 (one) Basic MPU Controller kit 1 (one) TFT - LCD 15” Monitor 1 (one) R.F. Pedal Force Transducer VLT 1034/M 2 (two) R.F. Air Pressure Transducers VLT 1064/M

VLT 1084/M contains: 1 (one) Basic MPU Controller kit 1 (one) TFT - LCD 15” Monitor 1 (one) R.F. Pedal Force Transducer VLT 1034/M 3 (three) R.F. Air Pressure Transducers VLT 1064/M

VLT 1085/M contains: 1 (one) Basic MPU Controller kit 1 (one) TFT - LCD 15” Monitor 1 (one) R.F. Pedal Force Transducer VLT 1034/M 4 (four) R.F. Air Pressure Transducers VLT 1064/M

VLT 1086/M contains: 1 (one) Basic MPU Controller kit 1 (one) TFT - LCD 15” Monitor 1 (one) R.F. Pedal Force Transducer VLT 1034/M 5 (five) R.F. Air Pressure Transducers VLT 1064/M

VLT 1075/M

Note: Each VLT 1034/M and VLT 1064/M comes with one emergency cable in case flat battery.

in Air Brake Systems of Tractor - Trailer Combinations and other Vehicles.

17

VLT ROLLER BRAKE TESTERS CARS • TAXIS • LIGHT GOODS VEHICLESBRAKE TESTER MODEL SERIES

MAX. AXLE WEIGHT (kg)

VLT 2500 2500

VLT 32/42/5200 3/4/5000

VLT 4400 4000


Model VLT 2522/M/ EURO 4

VLT 2533/M/ EURO 4

VLT 4422/M VLT 4433/M

Measuring range 0 - 6200 N 0 - 6200 N 0 - 10000 N 0 - 10000 NMaximum axle weight with 50% braking

2500 kg 2500 kg 4000 kg 4000 kg

Maximum axle weight with 70% braking 1750 kg 1750 kg 2850 kg 2850 kg

Maximum drive-over weight 4000 kg 4000 kg 5000 kg 5000 kgTesting speed 5.0 km/h 5.0 km/h 5.0 km/h 5.0 km/hRoller dimensions 200 x 700 mm 200 x 700 mm 220 x 860 mm 220 x 860 mmCentre-to-centre rollers 375 mm 375 mm 420 mm 420 mmAll rollers at same level same level same level same levelMinimum / maximum test width

800 x 2200 mm 800 x 2200 mm 800 x 2500 mm 800 x 2500 mm

Motor power (2x) 3.8 kW 3.8 kW 5 kW 5 kWElectrical supply 20 Amps delay 20 Amps delay 25 Amps delay 25 Amps delayFacility for upgrading to VLT 2533/M/

EURO 4- VLT 4433/M -

Weight measuring system range

optional 0 - 3000 kg optional 0 - 5000 kg

Pedestal for monitor standard standard standard standardDrive-over cover plates optional optional optional optionalRadio remote control standard standard standard standardPrinter and RS 232 interface standard standard standard standardRoller locking device optional optional optional optionalPedal force transmitter optional optional optional optionalOpt. subframe for concrete floor

VLT 2605/T2 VLT 2605/T2 VLT 4405/T2 VLT 4405/T2

VLT ROLLER BRAKE TESTERS2500 kg series VLT 2500/M/EURO 4, 4000 kg series VLT 4400/M

VLT 2500 AND VLT 4400 SERIES BRAKE TESTERSThe models in the VLT 2500/VLT 4400 series are especially designed for testing cars and vans. Axles with a weight up to 2500 kg (VLT 2500) or 4000 kg (VLT 4400) can be tested.

These Brake Testers have all rollers at floor level. There are two standard models for each series. One without weighing and one with weighing system. For the models with weighing system, our subframe needs to be installed.As read-out a 22” TFT monitor in console on a pedestal is standard. Also available are a wall mount bracket, an adjustable pedestal and console VLT 0847.

The robust structure of our testing systems together with the available options for extensions guarantee a long technical and economical life time.

Options available at time of ordering Roller Brake Tester:VLT 2039 / VLT 3239Opposite rotating of rollers (4x4)VLT 2538 / VLT 3238Roller locking device (best option)

Printers, keyboard, pedestals, printer/keyboard consoles, pedal force transmitters by cable or radio frequency, PC computer, Brake Data software, etc. on request at time of ordering or later.

Standard 22” TFT readout on pedestal

Standard 22” TFT readout with optional wall-mount

VLT 2533/M/EURO 4 + Subframe VLT 2605/T2 VLT 4433/M + Subframe VLT 4405/T2

18

VLT ROLLER BRAKE TESTERS 3000 KG, 4000 KG AND 5000 KGSeries VLT 3222/3233/M/P/22, VLT 4222/4233/M/P/22 and VLT 5222/5233/M/P/22


Model VLT 3222/M/P/22 VLT 3233/M/P/22 VLT 4222/M/P/22 VLT 4233/M/P/22 VLT 5222/M/P/22 5233/M/P/22Measuring Range each wheel 0 - 8000 N 0 - 8000 N 0 – 10000 N 0 – 10000 N 0 – 12500 N 0 – 12500 NMax. Axle weight with 50% braking 3000 kg 3000 kg 4000 kg 4000 kg 5000 kg 5000 kgMax. Axle weight with 70% braking 2300 kg 2300 kg 2900 kg 2900 kg 3600 kg 3600 kgMaximum drive-over weight 4000 kg 4000 kg 5000 kg 5000 kg 6000 kg 6000 kgAxle weight measuring range - 50 – 3500 kg - 50 – 4500 kg - 50 - 5500 kgTesting Speed 5.2 km/h 5.2 km/h 5.1 km/h 5.1 km/h 4.2 km/h 4.2 km/hRoller dimensions 220 x 750 mm 220 x 750 mm 220 x 860 mm 220 x 860 mm 220 x 860 mm 220 x 860 mmAll Rollers at Floor level Floor level Floor level Floor level Floor level Floor levelMinimum / Maximum test width 1 750 x 2250 mm 750 x 2250 mm 730 x 2450 mm 730 x 2450 mm 730 x 2450 mm 730 x 2450 mmMinimum / Maximum test width 2 650 x 2150 mm 650 x 2150 mm 880 x 2600 mm 880 x 2600 mm 880 x 2600 mm 880 x 2600 mmMinimum / Maximum test width 3 500 x 2000 mm 500 x 2000 mm 480 x 2200 mm 480 x 2200 mm 480 x 2200 mm 480 x 2200 mmMotor Power (2x) 4.0 kW 4.0 kW 5.0 kW 5.0 kW 5.0 kW 5.0 kWMotor voltage standard, 3 Phase 50 HzMotor voltage on request, 3 phase 60 Hz

380/400 Volt 440/480 Volt

380/400 Volt 440/480 Volt

380/400 Volt 440/480 Volt

380/400 Volt 440/480 Volt

380/400 Volt 440/480 Volt

380/400 Volt 440/480 Volt

Facility to upgrade to (*) VLT 3233/M/P/22 - VLT 4233/M/P/22 - VLT 5233/M/P/22 -Drive-over cover plates Optional Optional Optional Optional Optional OptionalRadio remote control Standard Standard Standard Standard Standard StandardPrinter and RS 232 interface Standard Standard Standard Standard Standard StandardOptional Sub frame for concrete floor VLT 3205T2 VLT 3205/T2 VLT 4005T2 VLT 4005T2 VLT 4005T2 VLT 4005T2* Facility to upgrade to RBT with weighing system only when installed in VLT original Sub frame suitable for weighing system.M: MPU Controller – P: Planetary gearbox – TFT 32” on request. Test Lane Model with only Controller on request.

® Patent Pending

VLT’s MOTOR DRIVEN ROLLER CONCEPT EVEN UNIQUE AS SPECIAL.After four years of intensive research VLT has developed the ultimate solution for Roller Brake Testers up to 5000 kg axle weight. VLT’s Motor Driven Rollers are the most innovative solution for Roller Brake Testers nowadays. Strong benefits of this design:• No longer losses of Brake Force due to misalignment. • Internal wear and losses in Gearbox / Motor

Combination Compensated. • Brake Force measurement direct on the Rollers. • Real Brake Force Readings. • By making use of a two step oversized Planetary

gearbox suitable to test: Electrical operated Hand or Parking Brakes in Applied Test mode (this is a Hand Brake Test against locked wheels)

• High IP 65 Protection • Available in three Roller Lengths 750 mm – 860 mm and

1050 mm by 220 mm Roller diameter. • Optional Roller Locking devices installed inside the

Rollers. • Very compact construction.• Low maintenance. • Roller Body made out high tension T 6 Aluminum, no

corrosion. • VLT solutions are known for the highest quality in the

Industry. • Available as VLT3200, VLT 4200 and VLT 5200 series in

standard and/or special versions. As stand-alone, as combination with Suspension Tester and Side Slip Tester (Mini Test Lane) or as fully integrated part of Automated VLT Test Lane.

Standard model Optional with Console

19

VLT ROLLER BRAKE TESTERS 4000 KGSpecial versions of the M/P series

Model: VLT 4233/1050/M/P/22”TFT VLT 5233/1050/M/P/22”TFT

Measuring range 0 – 5000/10000 N 0 – 6250/12500 NMaximum wheel weight on roller pair 2000 kg 2000 kgMaximum axle weight on both rollers pairs 5000 kg 5000 kgMaximum drive over weight axle 5500 kg 5500 kgTesting speed 5.2 km/h 4.2 km/hRoller dimensions 220 x 1050 mm 220 x 1050 mmCentre-to-centre rollers 420 mm 420 mmMinimum/maximum test width 350 x 2450 mm 350 x 2450 mmMotor Power (2x) 5.0 k 5.0 kWElectrical supply 400V, 3Phase, 50 Hz 20 Amps 20 AmpsWeight measuring system range no 50 – 4500 kgDrive over / covering plates Optional OptionalRadio Frequency remote control Standard StandardPrinter and RS 232 interface Standard StandardOptional sub frame for concrete floor VLT 4005/350x2450 VLT 4005/350x2450

For installation over Inspection pit we offer our VLT 4222 /M/P/22”TFT/SPLIT series

Model: VLT 4222/M/P/22”TFT/SPLIT VLT 4233/M/P/22”TFT/SPLIT

Measuring range 0 – 5000/10000 N 0 – 5000/10000 NMaximum wheel weight on roller pair 2000 kg 2000 kgMaximum axle weight on both roller pairs 4000 kg 4000 kgMaximum drive over weight axle 5000 kg 5000 kgTesting speed 5.2 km/h 5.2 km/hRoller dimensions 220 x 860 mm 220 x 860 mmCentre-to-centre rollers 420 mm 420 mmMinimum/maximum test width 860 – FREE - 860 mm 860 – FREE - 860 mmMotor Power (2x) 5.0 k 5.0 kWElectrical supply 400V, 3Phase, 50 Hz 20 Amps 20 AmpsWeight measuring system range No 50 – 4500 kgDrive over / covering plates Optional OptionalRadio Frequency remote control Standard StandardPrinter and RS 232 interface Standard StandardOptional sub frame for concrete floor VLT 4005/T2/SPLIT VLT 4005/T2/SPLIT

Special for caravans and light trailers with tandem axles we offer our VLT Lifting System VLT 4210/LIFTING to lift the axle under test up to 100 mm.This to increase the axle weight to its normal on the road weight.

Model: VLT 4210/LIFTING Lifting Capacity 4500 kg, stroke 100 mm

Suitable for Roller Brake Tester VLT 4233/M/P/22”TFT Test Range 880 x 2600 mmElectro/Hydraulic pump unit 1.5 kW 400 Volt 3 Phase 50 Hertz


Special Universal Roller Brake Testers with extra long Rollers for testing width range of Vehicle from Quads up to Light Goods Vehicle with double Tires on the rear axle, all on the same Roller Brake Tester, no problem with the VLT 42-5233/1050/M/P/22’’TFT series.


Technical specifications Roller Brake Tester Lifting System:

20

VLT ROAD CONTACT/SUSPENSION/ROLLER BRAKE TESTER COMBINATIONSVLT 362522/M/E/22”TFT, VLT 364222/M/P/22”TFT, VLT 365222/M/P/22”TFT

Technical specifications Roller Brake Testers:

Technical specifications Road Contact Suspension Testing System:

Model VLT 362522/M/E/22”TFTVLT 2522/M/E/22”TFT

VLT 364222/M/P/22”TFTVLT 4222/M/P/22”TFT

VLT 365222/M/P/22”TFTVLT 5222/M/P/22”TFT

Measuring range low 0 - 6200 N 0 - 5000 N 0 – 6250 NMeasuring range high - 0 - 10000 N 0 – 12500 NMax. axle weight with 50% braking 2500 kg 4000 kg 5000 kgMax. axle weight with 70% braking 1750 kg 2800 kg 3600 kgMax. drive-over weight 4000 kg 5000 kg 6000 kgTesting speed 5.0 km/h 5.1 km/h 4.2 km/hRoller dimensions 200 x 700 mm 220 x 860 mm 220 x 860 mmCentre-to-centre rollers 375 mm 420 mm 420 mmAll rollers at floor level floor level floor levelMinimum / maximum test width 800 x 2200 mm 730 x 2450 mm 730 x 2450 mmMotor power (2x) 3.8 kW 5.0 k 5.0 kWEl. supply at 400 V, 3 Ph, 50 Hz 20 Amps delay 20 Amps delay 20 Amps delayMonitor display 22” LCD-TFT 22” LCD-TFT 22” LCD-TFT Drive-over cover plates optional optional optionalRadio frequency remote control standard standard standardPrinter and RS 232 interface standard standard standardPedal force transmitter optional optional optionalOptional subframe VLT 362605/T2 VLT 364005T2/730x2450 VLT 364005T2/730x2450

Note: axle weight is measured by the Suspension Tester.

VLT 362522/M/E/22”TFT, VLT 364222/M/P/22”TFT, VLT 365222/M/P/22”TFT

VLT Road Contact – Suspension / Roller Brake Testers as Stand-alone version. The most advanced solution to offer your Vehicle owners the service they expect from you as Service – maintenance organization.This equipment is made for heavy use! Same as you find in the better equipped Vehicle Testing Stations.Standard available with nice and clear 22”TFT Monitor in Console on Pedestal and wall console for Controller box and motor relays. Or as top model with Style full Console with printer compartment and keyboard shelf. Really an eye catcher in your workshop.

With the purchase of this combination you get the best equipment available in the market. The Road contact Tester operates according the well-known EUSAMA principle. No reference value needed, just give you the correct Safe / Unsafe conditions of the Vehicle.In addition to the usual road contact values, the following values are also measured and displayed: the contact value difference, resonance frequency and wheel weight at minimum contact value, tyre pressure value, wheel weight and axle weight. There is a general final evaluation so that all these values do not have to be interpreted after every test. This is indicated by means of green, orange and red icons.

The Suspension Tester is used in combination with the Brake Tester. The two pieces of equipment are fitted in one single frame, monitored by the same computer. In our standard configuration we make use of a 22”TFT Monitor. The axle weight measured by the Suspension Tester is also used for the calculation of the brake efficiencies.

The VLT 3673/MK2 is the more advanced development of the VLT 3673/M fully based on the EUSAMA principle. The VLT 3673/MK2 has, besides the EUSAMA principle, the new developed phase shift included which makes the EUSAMA measuring somewhat more flexible for the lower wheel weights of smaller vehicles.

Model VLT 3673/M or VLT 3673/MK2Measuring principle Eusama Eusama + phase shiftMotor power (2x) 3.0 kW 3.0 kWMeasuring frequency 25 - 0 Hz 25 - 0 HzFreq. regulated by freq. inverter no yesCan test very low weight cars and cars with run-flat tyres yes yes

Vertical plate movement 6.0 mm 6.0 mmDim. of measurement plate (2x) 400 x 700 mm 400 x 700 mmWeight measuring system range 25 - 1500 kg each wheel / 50 - 3000 kg per axleMaximum drive-over weight 5000 kg 5000 kgThe above mentioned combinations can easily be extended with a VLT Side Slip Tester.We offer our VLT 3932 for stand-alone use and our VLT 3933 / 3934 for automatic Test Lane use.

Model VLT 3932/MK2 VLT 3934/MK2Linear up to wheel load of (axle) 3500 kg (7000 kg) 3500 kg (7000 kg)Max. drive-over weight wheel (axle) 5000 kg (10000 kg) 5000 kg (10000 kg)Dimensions of drive-over plate 650 x 700 mm 650 x 700 mmDimensions of compensation plate 195 x 700 mm 195 x 700 mmMeasuring range toe in / toe out -20 / 0 / +20 mm/m -20 / 0 / +20 mm/mContact sensor drive-in / drive-out no yesRigid counter plate opposite VLT 39331 VLT 39331Optional subframe VLT 3918 VLT 3919

Technical specifications Side Slip Testers:

Standard model Optional with Console

® Patent Pending

21

VLT ROAD CONTACT/SUSPENSION TESTERSVLT 3673/M - VLT 3673/MK2

VLT SIDE SLIP TESTERSVLT 3932/20 and VLT 3934/20



Model VLT 3673/M VLT 3673/MK2Measuring principle Eusama Eusama + phase shiftMotor power (2x) 3 kW 3 kWMeasuring frequency 25 - 0 Hz 25 - 0 HzFrequency regulated by frequency inverter no yesCan test very low weight cars and cars with run-flat tyres yes yes

Vertical plate movement 6.0 mm 6.0 mmMax. testing axle weight 2500 kg 2500 kgMax. drive-over axle weight 5000 kg 5000 kgDimensions of measurement plate (2x) 400 x 700 mm 400 x 700 mmWeight measuring system 25 - 1500 kg each wheel / 50 - 3000 kg per axleDimensions of measurement unit (w x l x d) 2350 x 500 x 255 2350 x 500 x 255Optional subframe VLT 3605/T2 VLT 3605/T2Optional subframe for heavy lane VLT 3610/MR/T2 VLT 3610/MR/T2

Model VLT 3932/20 VLT 3934/20Linear up to wheel load of (axle) 3500 kg (7000 kg) 3500 kg (7000 kg)Maximum drive-over weight wheel (axle) 5000 kg (10000 kg) 5000 kg (10000 kg)Dimensions of drive-over plate 650 x 700 mm 650 x 700 mmDimensions of compensation plate 195 x 700 mm 195 x 700 mmMeasuring range toe in / toe out -20 / 0 / +20 mm/m -20 / 0 / +20 mm/mContact sensor drive-in / drive-out no yes, two, one IN, one OUTRigid counter plate opposite VLT 39331 VLT 39331Optional subframe VLT 3918 VLT 3919

VLT 3673/M AND VLT 3673/MK2The Suspension Tester operates according to the well-known EUSAMA principle. However, the diagnostic options are not restricted to the contents of this specification. In addition to the usual road contact values, the following values are also measured and displayed: the contact value difference, resonance frequency and wheel weight at minimum contact value, tyre pressure value, wheel weight and axle weight. There is a general final evaluation so that all these values do not have to be interpreted after every test. The Suspension Tester can be used in combination with a VLT Brake Tester. The two pieces of equipment are monitored by the same computer. A single display cabinet is used for the two pieces of equipment. The axle weight measured by the Suspension Tester is also used for the calculation of the brake efficiencies.Models with 22”, 27” and 32” large TFT-LCD monitors with full colour display for information and results.The VLT 3673/MK2 the more advanced development of the VLT 3673/M fully based on the EUSAMA principle. The VLT 3673/MK2 has beside the EUSAMA the new developed phase shift included what made the EUSAMA measuring somewhat more flexible for the lower wheel weights of smaller vehicles.Further more the frequency at the VLT 3673/MK2 is controlled by a frequency inverter.

VLT SUSPENSION TESTERS ARE DESIGNED TO IMPROVE SAFETY ON THE ROAD. MODELS FOR UP TO 2500 KG AXLE WEIGHT.

VLT 3932/20 AND VLT 3934/20, FOR CARS AND LIGHT GOODS VEHICLESVLT supplies a wide range of Side Slip Testers for cars and light goods vehicles. Robust construction for a long life span, especially designed for their special purpose and specifications. The VLT Side Slip Testers are connected to a VLT Roller Brake Tester controller and displayed on the digital display or on a TFT-LCD monitor, depending on the configuration of the system.

22

VLT 2106 CARAVAN ROLLER BRAKE SIMULATOR WITH FLOOR RAIL (THE ORIGINAL)VLT 2810 CARAVAN ROLLER BRAKE SIMULATOR MOBILE UNIT FOR PRODUCTIVITY

VLT Caravan Roller Brake Simulator VLT 2106

PLAY DETECTOR SERIES FOR CARS AND LIGHT GOODS VEHICLESPLAY DETECTOR SERIES

With our Play Detectors for cars and light goods vehicles, we offer our customers a high quality

product with all possibilities to detect in no time play and wear on vehicles.

Plate left Plate rightVLT 9033 and VLT 9036 have 16 movements of the plates

manual or automated program cycles


Plate left Plate right

Our model VLT 9036 has extra steering facilities to turn the wheel left and right

Model VLT 9032 VLT 9033/PR/CRVLT 9033/PR/RF

VLT 9036/PR/CRVLT 9036/PR/RF

Maximum axle weight 5000 kg 5000 kg 5000 kgMaximum wheel weight 2500 kg 2500 kg 2500 kgTotal maximum movement 140 mm 140 mm 140 mmMaximum movement each side 70 mm 70 mm 70 mmHorizontal force, opposite 36 kN 36 kN 36 kNHorizontal force, on each plate 18 kN 18 kN 18 kNSpecial steering facilities no no yesPit dimensions all models +/- 540 x 740 x 130 mm (2x)Upper plates dimensions all models 590 x 720 mmMotor power all models 2.2 kWElectrical supply all models 230 / 400 V, 3 Phase, 50 HzAutomated program cycles no yes yesManual program yes yes yesRemote control / hand lamp by cable by cable radio frequencyMovement of the plates 8 >16 >16 + 2Subframe order no. all models VLT 9003

Model /PR/CR programmed cable remote controlVLT 9033/PR/CR - VLT 9036/PR/CR

VLT Caravan Roller Brake Simulator VLT 2106THE ORIGINAL CARAVAN ROLLER BRAKE SIMULATOR The VLT Caravan Roller Brake Simulator operates the brake mechanism on the triangle of the caravan. The Brake Simulator also holds the caravan in the roller sets of the Brake Tester. The mechanism in the Brake Simulator, which is activated by hand, Causes force through the coupling device on the overrun brake.This force is measured with a gauge and is displayed on the LED Display or Monitor of the Roller Brake Tester. A simulator locking rail must be ordered separately. Only in combination with VLT Light models Roller Brake Tester and for Heavy models with adapted software.Model VLT 2106 needs a rail to be concreted into the workshop floor: VLT 2106-300 Rail of 3 meterVLT 2106-400 Rail of 4 meterVLT 2106-500 Rail of 5 meter

NOW Available from VLT The All New Mobile Roller Brake Tester Caravan / Trailer Simulator VLT 2810This Caravan Simulator does in fact the same as the Original Model VLT 2106, but there is no need to install the floor rails anymore. It can handle Light Trailers with overrun Brakes up to 3000 kg. The VLT 2810 will be hooked on between the pulling Vehicle and The Caravan / Trailer. The Caravan can be picked up by the Simulator VLT 2810 from outside and bring the Caravan and Simulator up to the Roller Brake Tester, and after the Tests are completed bring the Caravan or Trailer back to the outside/parking area.Available for standard 50 mm ball coupling or for the open Nato Military coupling, or combination of both.Connection Simulator to Roller Brake Tester by cable or by wireless Radio Frequency. Ask for more information.

Model /RF programmed radio frequency remote controlVLT 9033/PR/RF - VLT 9036/PR/RF

VLT Caravan / Trailer Roller Brake Simulator VLT 2810 (Mobile)

23

VLT MOTORCYCLE ROLLER BRAKE TESTERSVLT 0573/M/22”/TFT


Model VLT 0573/M/22”/TFTMeasuring range 0 - 4000 NMaximum wheel weight 750 kgMaximum drive-over weight 1000 kgTesting speed 5.2 km/hRoller dimensions 260 x 350 mmCentre-to-centre rollers 350 mmRollers raised by 40 mm*Motor power (2x) 2.7 kWElectr. supply at 400 V, 3 Phase, 50 Hz 16 AmpsWeight measuring system range 20 - 1000 kgDrive-over cover plates optionalPrinter and RS 232 interface standardOptional subframe for concrete floor VLT 0507/T2Model number for test lane version VLT 0573/M/TL

VLT 0553/EURO Motorcycle wheel clamping device with alignment for checking the frame of the motorcycle

VLT 0554/EURO Motorcycle wheel clamping device, rigidVLT 0556/T2 Special subframe to install in the concrete floor, for VLT 0553/EURO - VLT 0572/

VLT 0573 and VLT 0554/EURO or two times VLT 0554/EURO with VLT 0572/VLT 0573

VLT 0592 Hydraulic pump unit with controls for operating two clamping devices

* = above floor level

Note: when ordering the clamping devices and subframe, there is no need to order subframe VLT 0507/T2.

VLT 0573/M/22”/TFTAll new VLT motorcycle Roller Brake Testers, especially designed for high throughput inspection stations, are also available as stand-alone for the after-market. These can be used in workshops, motor clubs or police stations and (as originally designed for) inspection stations.

This Roller Brake Tester is available as stand-alone unit with TFT-LCD monitor in 22“ size, and of course as part of a fully automated motor cycle inspection lane.

Illustrated optional console,left top the standard readout.

Motorcycle Roller Brake Tester with Wheel Clamping Devices. Pictures as installed in Automated Test Lane.

(Standard) (Optional Console)

VLT 0554/EUROVLT 0573/M/22”/TFTVLT 0554/EURO

24

VLT 2/3/4-WHEELER ROLLER BRAKE TESTERSVLT 1733/M/22, VLT 1933/M/P/22 and VLT 4266/M/P/22


Model: VLT 1733/M/22 VLT 1933/M/P/22 VLT 4266/M/P/22Measuring range 0 – 2000/4000 N 0 – 3000/6000 N 0 – 5000/10000 NMaximum wheel weight one roller 750 kg 1250 kg 2000 kgMaximum axle weight on both rollers 1500 kg 2500 kg 4000 kgMaximum drive over weight axle 2000 kg 3000 kg 5000 kgTesting speed 5.2 km/h 5.0 km/h 5.0 km/hRoller dimensions, first roller 220 x 650 mm 220 x 750 mm 220 x 860 mmRoller dimensions, second roller 220 x 1150 mm 220 x 1050 mm 220 x 1050 mmCentre-to-centre rollers 350 mm 400 mm 400 mmMinimum/maximum test width 200 x 1900 mm 300 x 2150 mm 290 x 2200 mmMotor Power (2x) 2.7 kW 4.0 kW 5.5 kWElectrical supply 400V, 3 Phase, 50 Hz. 16 Amps 16 Amps 16 AmpsWeight measuring system range 40 – 2000 kg. 40 – 3000 kg. 30 – 5000 kg.Drive over / cover plates Optional on request Optional on request Optional on requestRadio Frequency remote control Yes, standard Yes, standard Yes, standardPrinter and RS 232 interface Yes, standard Yes, standard Yes, standardOptional sub frame for concrete floor VLT 1705T2 VLT 3205T2/300x2150 VLT 4205T2/290x2200

VLT, Pioneer on Roller Brake Testers for Two and Three Wheeled Vehicles has combined their Testers for Universal use including Quads - Cars (Taxi) and Light Good Vehicles up to 1500, 2500 or 4000 kg. axle weight.These VLT Roller Brake Testers are designed special for the India Sub Continent and Far East Market, they can be used throughout the world; again a unique VLT development.These Roller Brake Testers are available as stand-alone version with 22”TFT Monitor screen as standard, on request we supply 32” TFT Monitor.But we supply these RBTs also as part of our VLT Integrated Test Lanes.

VLT 1733/M/22, VLT 1933/M/P/22 and VLT 4266/M/P/22 Ultimate Roller Brake Testers, special for countries with mixed vehicles, like Three Wheelers - Cars (Taxi’s) - Quads - Light Goods Vehicles and Motor Cycles. All in one solution up to 1500KG, 2500 KG or 4000 KG axle weight

Available just as Roller Brake Tester only, or as combination with Side Slip Tester and Suspension / Road Contact Tester. All three machines are operating on one single VLT Embedded Controller which is connected to a 22”or 32” TFT/LCD Monitor.

The combination unit is available as part of our VLT Fully Integrated Vehicle Test Lane Concept, including Vehicle Tracking. This Test Lane Concept is unique, because the Vehicle is led through the Test Lane, without using remote controls, and all the pass / fail criteria are handled by the VLT Test Lane Computer.In case of multiple Lane Stations we make use of a VLT Station Server.

VLT 4266/M/P/22

25

VLT ABOVE AND/OR UNDER CARRIAGE SPECIAL KEYBOARDS

In 1995 VLT introduced its famous time saving Above and/or Under Carriage Keyboards. A very robust, designed VLT product (suitable for a rough environment), which guides the inspector through the test and in combination with the VLT Test Lane concept database, it tells the inspector by way of green LED’s which items need to be inspected.

If there are no fail items, the inspector simply presses the large enter key to confirm that the test is completed. If there are (major) items that fail, he presses the failed items key once and a red LED lights up, while the green LED goes off. If the selected item is a minor fail, he presses the failed key twice. The first time the red LED lights up and after the second time both the green and red LED’s are on. This means that this item or items need no repair before passing the overall test. The VLT Above and/or Under Carriage Keyboard has 86 keys and a large enter key. The user can make changes on the keyboard if one is using the VLT Test Lane software module. If the VLT Above and/or Under Carriage keyboard is installed in the VLT Test Lane concept with 32” TFT-LCD monitors, all the information on fail (minor or major) is displayed: minor items by green V / red X and major items only by red X. Correction can easily be made by pressing one time more on the same key (repeat function).

VLT 0845 (Console only)


Model VLT 101034Overall dimensions (w x h x d) 565 x 275 x 60 mmNumber of keys 86 plus ENTER keyNumber of LED’s 86 green plus 86 redInterface out RS 232 / RS 422Number of keyboards to connect serial two keyboards in serial by RS 232 availableNumber of keyboards to connect parallel as RS 232 / RS 422 ports availablePower requirement use VLT 101046 power supplyDefinition of keys by VLT if information is known or by customer

OPTIONMonitor TFT-LCD 15” can be connected to Above and / or Under Carriage Keyboard if connected to VL Test Lane software module.

VLT 0845/2 (Console only)VLT Tablet 10” for Under Carriage Inspection in Fully Automated Test Lanes

All membrane keyboards: End of life

26

Technical specifications VLT 4588 MK2 Emission Tester: Technical specifications VLT 4590 MK3 Diesel Smoke Tester:

VLT EMISSION / DIESEL SMOKE TESTERS VLT 4588 MK2 AND VLT 4590 MK3

Robust State of Art Multi gas exhaust analyser for intensive use. Meet the highest standards and demands of today and tomorrow. This fully digital infrared gas bench technology provides rapid analyses of a vehicle performance and pollutions. Designed as user friendly analyser for mandatory vehicle testing and fault diagnosis of Petrol – LPG and CNC vehicle emissions.

Model: VLT 4588 MK2

Stand-alone : yes, optional Test Lane module.

Power input : 230 V -10% + 15%

Max. power: : 70 Watt

RPM : 100 – 7500 1/min. Optional Diesel Smoke Cell:

CO : 0 - 10 vol. % Model : VLT 4595 MK3

CO2 : 0 – 20 vol. % Opacity :0 – 99.9% / 0 - 9.999 M -1

HC : 0 – 10.000 vol. ppm Exhaust probe: 4,5 meter Ø 16 mm

O2 : 0 – 25 vol. % Max. power: : 200 Watt

Lambda : 0.5 – 4.0 Measuring cell temp. : 75 °C

NOx optional : 0 – 5000 vol. %

Weight of unit : approx. 10 kg.

VLT offers you with this new developed most advanced Diesel Engine Analyzer for Testing Commercial Vehicles, Buses as well Cars an Taxi’s.Make use of the latest digital processor technology to ensure that Smoke Emission Levels are measured quickly and accurately. We make use off well known High quality, aluminium 430 mm smoke cell for repeatability of measurements in combination with a minimum of maintenance.

Model: VLT 4590 MK3

Stand-alone : yes, optional Test Lane module.

Power input : 230 V -10% + 15%

Max. power: : 200 Watt

Opacity : 0 – 99.9% / 0 - 9.999 M -1

Exhaust probe : 4,5 meter Ø 16 mm

Measuring cell temp. : 75 °C

Standard features:Complies with the latest standards.OIML Class O accuracy – CE approved.Quick and easy operation.Test Petrol – LPG and CNG Engines.6 Clear 4 digit LED displays.Integrated thermal printer.RPM and Oil temperature measurement. Step by step test routines.Ready to connect up Diesel Smoke Cell.

VLT FOUR-FIVE GAS EMISSION TESTERPortable VLT Multi Gas Emission Tester for Stand-alone use or as integrated part of Vehicle Test Lane. Extendable with Diesel Smoke Cell.

VLT DIESEL SMOKE TESTER VLT 4590 MK3

Portable VLT Diesel Smoke Tester for Stand-alone use or as integrated part of Vehicle Test Lane.

Standard features:Complies with the latest standards.CE approved.Quick and easy operation.Test passengers cars – Taxi’s aswell Commercial Vehicles and Buses.6 Clear 4 digit LED displays.Integrated thermal printer.Fast warm up with automatic zero andWeekly calibration check.

Diesel Smoke Cell standard for VLT 4590 MK3 optional for VLT 4588 MK2 as VLT 4595 MK3 Optional Trolley VLT 5921/2

27

VLT HEADLIGHT BEAM TESTERS FOR TEST LANE USE: VLT 0936/MK2 AND VLT 0938/MK2 FULLY AUTOMATED MODELS, VLT 0939TL01 MANUAL MODELS

VLT offers three versions of the advanced range of Headlight Beam Testers. VLT’s development department was inspired years back by the non-availability of a product which could meet its high quality standard, resulting in the development of an own range of VLT Headlight Beam Testers. The market shows its interest in the developed VLT Headlight Beam Testers.

VLT 0936/MK2 Test Lane VersionFully digital computer controlled CCD Headlight Beam Tester, with fully automated vertical and horizontal movements, with automated searching of the hot spot of the beam. This robot type Headlight Beam Tester is connected to the Vehicle Test Lane Computer System and displays instructions and results on one of the large overhead TFT/LCD monitors of the Test Lane.

VLT 0938/MK2 Test Lane VersionHeadlight Beam Tester with VLT’s patent pending vehicle position scanner system. This model has a fully digital computerized controlled CCD camera, has the same fully automated vertical and horizontal movements, including automated searching of the hot spot of the beam, as the VLT 0936/MK2 model, but also scans the vehicle and measures the centre line of the vehicle and compensates automatically if the angle is not the same. This all at a speed of at least 5 times faster than manually operated testing systems.

VLT 0939TL01 Manual Model for Integrated use in VLT Test LanesManual Headlight Beam Tester with the same measuring techniques as our fully automated models. This manually operated model for use in VLT Test Lanes has a cable connection to the Test lane Computer.Including rechargeable battery pack and charger.

VLT 0939TL02RF Advanced Manual Model for Integrated use in VLT Test Lanes Manual Headlight Beam Tester with The same measuring techniques as our fully automated models. This manually operated model for use in VLT Test Lanes comes with RF (Radio Frequency) communication with the Test Lane Computer. Including Battery pack and battery charger (charging overnight)

Vehicle Position Scanner

Precision Guide rail

2 Driven Wheels

Optical Unit with CCD camera

TFT Display

Sensor Bar for Lamp Detection

Precision Drive for Optical Unit

28

VLT SPEEDOMETER / TAXIMETER TESTERS

Speedometer Tester Model Subframe

VLT 1885 VLT 1805/T2VLT 3885 VLT 3805/T2VLT 6885 VLT 6805/T2VLT 14885 VLT 14805/T2

Subframes

Model Max Weight A B C

VLT 1885 1000 kg 600 1900 325VLT 3885 3500 kg 880 2600 375VLT 12885 12000 kg 800 2800 500VLT 14885 14000 kg 800 3000 630

BA

C

Speedometer Tester VLT 3885 in subframe VLT 3805/T2

29

VLT SPEEDOMETER TESTERS


Taximeter test (Test Lane Version) Speedometer test (Test Lane Version)

Speedometer test (Stand-alone Version)

Speed warning device test (Stand-alone Version)

Speed limiter test (Stand-alone Version)

VLT 3885/MK2 with console and 32”overhead monitor

VLT Speedometer testersVLT has a range of Speedometer Testers from 1000 kg, 3500 kg, 12000 kg up to 14000 kg, developed for intensive and heavy use in Automobile Test Stations. All models consist of 4 special coated rollers of which 2 rollers are connected by a propeller-shaft on which the electronic pulse counter is fitted. The signals are sent to the Speedometer controller.The results are displayed on a 22”TFT monitor. Speedometer Testers are available in TEST LANE or STAND-ALONE version. The software is standard or tailor made. The VLT 3885 (the 3500 kg version) is available with a taximeter conversion. This means that in a taximeter configuration an electrical motor is driving the rollers, ensuring that the reading is very accurate (less sound and no Emissions). All four models are very robust and can be classified as top of the market, with high value for its price, fitted with a fast hydraulic lifting system which locks the rollers when the lift is up. The 14000 kg version has an independent roller braking system. A hydraulic lifting system is more expensive as the common pneumatic system, but more powerful and more reliable, especially with heavy use of the Speedometer. The Test Lane version has a drive-in sensor device for full automatic use and safety protection.

STAND-ALONE VERSIONTEST LANE VERSION

VLT 1885/MVLT 1885/M/TL

VLT 3885/MK2VLT 3885/MK2/TL



Max. testing speed standard 90 km/h 160 km/h 120 km/h 120 km/h

Max. testing speed 120 km/h 200 km/h 150 km/h 150 km/hMax. drive-over weight (axle) 2000 kg 5000 kg 14000 kg 18000 kg

Max. testing weight (axle) 1000 kg 3500 kg 12000 kg 14000 kgRoller dimensions 250 x 650 mm 238 x 860 mm 315 x 950 mm 400 x 1100 mmCentre-to-centre rollers 325 mm 375 mm 500 mm 630 mmMin. / max. testing width 600 x 1900 mm 880 x 2600 mm 800 x 2800 mm 800 x 3000 mmAll rollers raised by 40 mm 40 mm 40 mm 40 mmRoller set dimensions (w x l x d)

follow 725x3070x450 mm

930x4350x450 mm

1190x3484x640 mm

Hydr. pump unit 3x400 Volt 1.5 kW 3.0 kW 3.0 kW 3.0 kW

Approx. net weight follow 1240 kg 2225 kg 2985 kgMonitor version VLT 1885/M/22” VLT 3885/M/22”

TFT/CONVLT 12885/M/22” TFT/CON

VLT 14885/M/22” TFT/CON

Test lane version TFT-LCD monitor 32”Taximeter extension available only on VLT 3885/MK2 and VLT 3885/MK2/TL

TAXIMETER OPTION VLT VLT 3885/40 VLT 3885/60Electrical motor 400 Volt, 3 Ph 5.5 kW 7.5 kWTesting speed approx. 40 km/h 60 km/h

Speed adjustable by frequency converter

30

ALL NEW VLT CHASSIS DYNAMOMETERS FOR PERFORMANCE MEASUREMENT AND DIESEL SMOKE TESTING UNDER ROAD CONDITIONS (CDST).

VLT Chassis Dynamometers for Diesel Smoke Testing under Road Conditions (CDST).

Diesel Smoke Testing by Free Acceleration Test is one! But how accurate is this Test? We all know that it is a not valuable test, but still better as none testing of Vehicle Diesel Engines. The results are not realistic in many cases. And not as good for the Engine we know.

VLT knows that they are not the First Company to bring this kind of solution. But many of you know when VLT comes in the market it brings a High end solution!VLT offer you a range of three High Tec models, not less than that!

VLT offer our special Cars and Light Vehicles model VLT 038950 (not illustrated), a 6 Ton axle weight Medium Duty model VLT 068950, handling Light and Medium Vehicles, a 14 Ton axle weight Heavy Duty model VLT 148950, handling Light, medium and Heavy Vehicles and the top of our Range is a 24 Ton Dual Drive version model VLT 248950 for Tandem axle dual drive Vehicles, and handles at the same time Light and Medium Vehicles. This Special model comes with a NEW revolutionary VLT Concept (Patent pending).

All models are fully Computer Controlled VLT Solution for Diesel Smoke Testing under Road Conditions.

Revolutionary design of the all new VLT 248950 Chassis Dynamometer

Model VLT 038950 VLT 068950 VLT 148950 VLT 248950Maximum axle Load under test 3000 kg / 6600 lbs 6000 kg / 13200 lbs 14000 kg / 30800 lbs 24000 kg / 52800 lbsMaximum speed at axle load of 150 Km/hour at 3 ton 150 km/h at 6 ton 100 km/h at 14 ton 90 km/h at 24 tonMaximum speed at axle load of 175 Km/hour at 2 ton 175 km/h at 3 ton 120 km/h at 10 ton 100 km/h at 14 tonMaximum speed at axle load of 200 Km/hour at 1 ton 200 km/h at 2 ton 160 km/h at 6 ton 160 km/h at 6 tonNumber of rollers Four (4) four (4) four (4) six (6)Roller diameter x length 320 x 700 mm 400 x 900 mm 400 x 1100 mm 400 x 1100 mmVehicle axle lift capacity 4000 kg 7000 kg 16000 kg 16000 kg **Roller inner / Roller outside dimensions 800 / 2200 mm 700 / 2500 mm 800 / 3000 mm 800 / 3000 mmCentre to centre Rollers 500 mm 550 mm 630 mm 630 mmNumber of Eddy current brake(s) One (1) one (1) two (2) three (3)Maximum brake power 300 kW / 400 hp 300 kW / 400 hp 600 kW / 800 hp 750 kW / 1000 hpNumber of hold / drive out disc brakes four (4) four (4) six (6) eight (8)Hydraulic pump for lift and hold brakes 1,5 kW – 3 phase 3 kW - 3 phase 3 kW - 3 phase 3 kW - 3 phaseAdjustable tandem axle rollers for wheelbases Not applicable not applicable not applicable 1150 - 1550 mmAuxiliary cooling fan 380/400 Volt 3 phase ø500 mm – 0.25 kW * ø630 mm - 0.5 kW * ø630 mm - 0.5 kW * ø630 mm - 0.5 kW *Note * dual speed ** tandem second axle does not need a Lift.Optional subframe for casting into concrete VLT 03806/T2 VLT 06806/T2 VLT 14806/T2 VLT 24806/T2These subframes come with locking attachments to hold the vehicle in place during the test, ask for details.

Additional Technical information on 24 Ton Dual Drive Model VLT 248950:Suitable for the full Range of Vehicles (Excluding permanent four wheel drive Vehicles with wheelbase over 1550 mm)Designed for Heavy Vehicles 6x4, (6x6 if Front axle can be switched off) Heavy Vehicles and Buses 4x2.Also capable of testing CARS and Light Good Vehicles as well due to this Revolutionary design.Maximum Axle Load under Tandem axles: 24000 kg. Maximum Axle Load under Single axle: 14000 kg.


31

VLT has developed a series of Chassis Dynamometers for diesel smoke and other emissions under road conditions where more accurate results are measured as with the common free acceleration tests. Ready for nowadays discussed Partial Measurement Test. CDST tests are far more safe for the vehicle engine than the free acceleration tests.

VLT offer a series of four (4) models. We have 3000 kg and 6000 kg axle weight light versions and the 14000 kg axle weight single axle model and the double drive tandem axle 24.000 kg tandem axles model. This last

double drive tandem unit is revolutionary, unique in the industry. Due the VLT innovations you can test any car – light goods vehicle – buses – heavy goods vehicles single or double drive, on this tandem CDST. Same for the 14000 kg model all vehicles except double drive axles. Ask for more information at Van Leeuwen Test Systems B.V.

For All Wheel Drive cars we can offer VLT’s dual 3000 kg CDST Solution (consisting of two 3000 kg CDST’s controlled by VLT’s one Dual CDST Controller Console).

BA

C

øD

VLT 24806/T2

Model A B C DVLT 038950 800 2200 500 ø320VLT 068950 700 2500 550 ø400VLT 148950 800 3000 630 ø400VLT 248950 800 3000 630 ø400

Subframe for Model Nr.

VLT 038950 VLT 03806/T2VLT 068950 VLT 06806/T2VLT 148950 VLT 14806/T2VLT 248950 VLT 24806/T2

Subframes

32

VLT MOBILE INSPECTION STATION

33

A mobile Vehicle Inspection Station is an ideal solution for performing roadside inspections, or for use in remote locations that have no other vehicle inspection facilities (e.g. inspection station) nearby.

VLT’s Mobile Inspection Station is a fully equipped, fully integrated Test Lane on a semi-trailer. It is suitable for testing cars, vans, light goods vehicles, heavy goods vehicles, trailers and buses.

Features: - Play Detector - Side Slip Tester - Roller Brake Tester (16000 kg) with optional axle lift - Suspension Tester (with drive-over protection) - Speedometer Tester - Emission / Diesel Smoke Tester with Trolley - Headlight Beam Tester - Tablet for Visual Inspection, readout, instructions to the driver,

remote control,etc. - Test Lane Computer with software - Power Generator - Office - All the above on a 2-axle semi-trailer with steered axles - Remote control unit for steering axles (for parking)

34

Technical Specifications VLT Mobile:Roller Brake Tester. Model VLT 16233/M5P/MobileMeasuring range .................. 0-8000-40000 Newton or 0-800-4000 KgfMax. axle weight with 50% braking .......................................... 16000 kgMax. drive over axle weight ...................................................... 20000 kgAxle 8 points weighing device ................................................... 18000 kgTesting speed ............................................................................ 2.6 km/hOptional testing speeds (VLT 14134) .................................2.6 / 5.2 km/hDimension of rollers .......................................................260 x 1100 mmCentre-to-centre rollers ............................................................ 470 mmAll rollers raised by ..................................................................... 40 mmMinimum -maximum testing width ............................... 800 – 3000 mmMotor Power (special motors) ....................... 2x 11 kW (11kW / 11kW)Optional on request: VLT 14135 Counter wise Rotating – VLT 14138 Roller Locking – VLT 16132 Two measuring directions.

Power Supply at 400 Volt 3 phases 50 Hz. from Gen Set or local supply .............................................63 Amps (60 Hz on request)Read out standard ......................................................... VLT Tough BookOr on request ................................Digital / Analogue Read out ConsoleRead-out Control unit: VLT Hand Held Tough Book tablet connected by Wireless LAN to Mobile Test Station Computer or Laptop / Notebook Computer under VLT Software program. For the Equipment installed in the Mobile Unit Optional Above and Undercarriage program available.

Optional Side Slip Tester Model VLT 3942/MobileLinear up to wheel load of. ......................................................... 6500 kgMaximum drive over weight (wheel) ........................................ 10000 kgDimension measuring plate ...........................................800 x 1000 mmDimension Compensation plate ........................................800 x 195 mmMeasuring range toe-in / toe out ............................... -20 / 0 / + 20 mm

Optional Suspension / Road Contact Tester Model VLT 3763/MOBILE with Protection platesMeasuring principle .................................................................. EUSAMAMeasuring frequency ................................................................25 – 0 HzVertical movement ..................................................................... 6.0 mmDimension measuring plates .............................................400 x 700 mm Max. axle weight test/drive over unprotected ...........2500 kg / 5000 kgDrive over weight when protection plates closed .................... 15000 kg

Optional Play Detector VLT 9052/MobileMaximum wheel weight / axle weight ........................ 10000 / 20000 kgMaximum movement total / each side .............................200 / 100 mmHorizontal force opposite / on each plate .........................60 kN / 30 kNElectro Pump Motor / hydraulic pressure ....................... 3 kW / 130 Bar

Optional Speedometer VLT 8885/12/MobileMaximum testing speed / short time ................... 125 km/h / 160 km/hMaximum testing weight .....................................................8000 kg axleMaximum drive over weight ..............................................15000 kg axleRoller dimensions ...........................................................238 x 1000 mmMinimum / Maximum testing width ...............................800 / 3000 mmAll roller raised by ....................................................................... 40 mmDrive out help / drive over ......................................hydraulic lift / lift up

Other optional equipment to Mobile Vehicle TesterVLT 4588/MK2/MOB .......................................................Emission Tester VLT 4590/MK2/MOB ................................................Diesel Smoke TesterVLT 0939/TL02RF/MOB ...................................... Manual Head Beam/RFVLT 0893 / VLT 0893/01 .............................................Sound Level Tester Other equipment like ................................... Tinted Glass Tester requestOptional second VLT Hand Held Tough Book ............................ including Software extension for Testing in 2 Stages on request.

VLT MOBILE VEHICLE TEST STATION WITH SAME PERFORMANCE AS EQUIPMENT IN YOUR VEHICLE STATION(S), WITHOUT COMPROMISES!

More about the Mobile Units; Semi Trailer Mobile Vehicle Test Centre or 20’ Container size solution itselfThe standard units comes with a Universal Roller Brake Tester suitable for testing 16 tons axle weights, testing up to 40.000 Newton (4000kgf) with a drive over axle weight of 20 tons, but the Brake Tester is suitable not only for Commercial Vehicles but for Cars and Light Goods Vehicles as well. The Roller Brake Tester can even be supplied with an axle lifting device for load simulation (This option is standard on the DROPS Truck system).Options for your Mobile Vehicle Test UnitsWe can offer the following additional equipment: Side Slip Testers – Wheel Play Detectors – Suspension Testers for Cars & Light Goods Vehicles (with protection plates when driving over with HGV’s) – Speedometer Tester with option for Taximeter testing.Even more options for your Mobile Test Units:Emission and Diesel Smoke Tester – Sound Meter – Headlight Beam Tester – Visual Vehicle Testing, above and below carriage Inspection by our VLT tough Book 10.4” Hand Held Touch screen tablet monitor directly connected by Wireless LAN to the VLT Test Lane computer (This tough book comes as standard with the Basic version of the Mobile units). Optional Read out version on request available.Power Requirements:The mobile units can be used by simply connecting up to a local supply of 380 / 400v 3phase E + N 50Hz supply (60Hz available on request) or you can order your Mobile Test Unit complete with our onboard Diesel GEN SET 70KVA. You can also use a combination of both for road side use if required.Read out & Control units of this unique VLT Mobile Vehicle Test StationThe standard unit is supplied with our newly developed VLT Tough Bo

INTRODUCTION - VLT Company Website Van Leeuwen Test ...Models VLT 120233/M5P/4: 15/12 ton, VLT...

Documents

Transcript of INTRODUCTION - VLT Company Website Van Leeuwen Test ...Models VLT 120233/M5P/4: 15/12 ton, VLT...