Introduction to GENEX Nastar GSM Issue1.0_doc8
-
Upload
agung-setiyobudi -
Category
Documents
-
view
364 -
download
16
Transcript of Introduction to GENEX Nastar GSM Issue1.0_doc8
![Page 1: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/1.jpg)
Huawei confidential, 2007-04www.huawei.com 1
Huawei GENEX Series
![Page 2: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/2.jpg)
Huawei confidential, 2007-04www.huawei.com 2
Enabling more efficient investment through intelligent prediction and guidance of capacity expansion
Taking the users as the orientation and paying attention to the service quality
Functions of GENEX NastarFunctions of GENEX Nastar
Pay attention to the trend of the network development, make predictions and suggestions, and answer whether, when, and where to perform a capacity expansion.
Monitoring the whole network, locating remote problems, and processing problems efficiently Monitoring the network quality fully
Solving more than 80% network faults remotely without a field test and solving the most hidden
problems before the exposure of them
With the help of Nastar GSM, Digitel (Philippines) manages 33 BSCs, expands the network
coverage, and improve the quality of Um interface since 2004.
Focusing on your attentions, such as VIP users, areas, and eventsProviding the customers with high-quality services by monitoring hot spot areas and analyzing the resource bottleneck
![Page 3: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/3.jpg)
Huawei confidential, 2007-04www.huawei.com 3
Introduction to the functions of GENEX Nastar GSM
• Network Monitoring and Analysis• Network Problem Location and Analysis• Report Auto-Generation and Experience
Sharing• Network Development Prediction
Installation of GENEX Nastar GSM
Introduction to the Operation of GENEX Nastar GSM
![Page 4: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/4.jpg)
Huawei confidential, 2007-04www.huawei.com 4
Network Monitoring and AnalysisNetwork Monitoring and Analysis
Select the statistic objects flexibly, and monitor and o manage the resources of multiple providers’ equipment With a province-level NM Display the analysis results directly and geographically Report the alarms in time, support audio and video alarms, display alarms geographically, and recordprocessor, processing procedure, and processing results, thus providing references for the future operations Check the rationality of RNP to find and solve the hidden project problems, thus providing bases for the network optimization and adjustment
0
200
400
600
800
1000
1200
1400
CALOOCAN1 CALOOCAN2 Tot al
BSC St at i st i c
Item Value
站点总数
小区总数
载频总数
检查参数总数
不合格参数项目数目
BSI C全网同频同 小区数目
BI SC邻区同频同 小区数目
BCCH邻区存在同邻 的小区
单向邻区数目
配置邻区过少的数目
漏配邻区的数目
过远邻区的数目
Data generation
Radio network
Auto-Upload
BAM
Auto-Analysis
Nastar server Client
Quasi-realtime monitoring
![Page 5: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/5.jpg)
Huawei confidential, 2007-04www.huawei.com 5
Network Problem Location and AnalysisNetwork Problem Location and Analysis
Support the data conversion and sharing between the platforms, analysis of the data collected through Wanhe and Dingli tester, and the cooperation with the traffic statistic, thus providing convenience for the problem location
Drive test analysis platform
Support the combinations of multiple traffic statistic, querying and analyzing according to multiple time granularities, Distract the useful data according to the RNO requirements, and greatly raise the accuracy and efficiency of the check.
Enhanced traffic statistic
Support flexible definition of the KPI indicators, convenient and quick query, and the filter of useless information
Performance indicator analysis
Analyze the key indicators of RNO problems deeply, provide advanced engineers with the function of custom indicator edition, so that the engineers can discuss the problems with their own RNO experience
Topical analysis
The whole network
TRX
Performance query
Custom setting KPI analysis
Top N TRX
![Page 6: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/6.jpg)
Huawei confidential, 2007-04www.huawei.com 6
Network Problem Location and Analysis — Frequency Analysis
Network Problem Location and Analysis — Frequency Analysis
• Co-frequency, adjacent frequency check in the whole network
• General check of Co-frequency Co-BSIC cells
• Idle frequency point search• Spectrum utilization check• Co-HSN Co-MA check• Frequency optimization check
Perfect and effective frequency analysis
The advantages of frequency analysis
• Analyze the frequency points of the current cell, the frequency points of the neighbors, the distance between neighbors, and idle frequency points, so that the engineers can know the frequency quickly and directly.
• Provide great convenience for the site creation and the modification of the cell frequency points
• Evaluate the frequency utilization quickly and ensure the frequency planning is reasonable
Everything is under the
control.
![Page 7: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/7.jpg)
Huawei confidential, 2007-04www.huawei.com 7
Network Problem Location and Analysis – Neighbor Analysis and Optimization
Network Problem Location and Analysis – Neighbor Analysis and Optimization
This cell has a low handover success rate, Let’s check its neighbor relation.
The neighbor relation does
cause the problem. I will optimize the neighbors.
After the neighbor optimization, the handover success rate rises greatly.
RNO engineer
RNO engineer
RNO engineer/Product
manager
![Page 8: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/8.jpg)
Huawei confidential, 2007-04www.huawei.com 8
Report Auto-Generation and Experience SharingReport Auto-Generation and Experience Sharing
Output daily reports, weekly reports, and monthly reports automatically, flexibly, and regularly, count the information of the whole network correctly, monitor the network conveniently, and discover and solve the potential network problems in time
Network health check reports: Perform impersonal evaluation to the network indicators and help the engineers to control the network quality easily
Integrate analysis of the measurement reports: Analyze the problem cells according to the uplink\downlink level and give processing ideas to locate and solve the problems directly
Network monitoring reports:Provide network quality monitoring/comparative reports in different levels according to different requirements
Share the classic RNO cases of Huawei RNO experts, enlighten the field engineers to locate the problems, and help the engineers to improve their skills
Share the classic RNO cases of Huawei RNO experts, enlighten the field engineers to locate the problems, and help the engineers to improve their skills
RNO cases
With Nastar GSM, you can also output custom reports. It is
so convenient.
![Page 9: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/9.jpg)
Huawei confidential, 2007-04www.huawei.com 9
Network Development Trend AnalysisNetwork Development Trend Analysis
By analyzing every section in the network, this tool tells you why, where, and how to improve the network performance, and helps you how to increase the
operator’s income and make an effective operation strategy.
80 ~ 10050 ~ 8030 ~ 5010 ~ 300 ~ 10
It is required to add BTSs.
• Resource utilization analysis
• Capacity expansion analysis report
• Resource utilization analysis
• Capacity expansion analysis report
Investment
Returns
![Page 10: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/10.jpg)
Huawei confidential, 2007-04www.huawei.com 10
Introduction to the Functions of GENEX Nastar GSM
Installation of GENEX Nastar GSM
Introduction to the Operation of GENEX Nastar GSM
System Structure of GENEX Nastar GSM
![Page 11: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/11.jpg)
Huawei confidential, 2007-04www.huawei.com 11
System Structure of GENEX Nastar GSMSystem Structure of GENEX Nastar GSM
Module Description
TransData( An import
module)
This module is used to import data and it has the following
functions:•Browsing the results of the traffic statistic register•Displaying the information of the current database•Backdating the information of the current traffic statistic task
Nastar (The main module) This module is the access end of Nastar and it has the
following functions:•Querying the customized traffic statistic tasks•Displaying the traffic statistic query results directly•Analyzing the RNO topics
NaConvert (An collection
module)
With this module, you can obtain the traffic statistic data from
BAM and upload the data to the server of Nastar.
![Page 12: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/12.jpg)
Huawei confidential, 2007-04www.huawei.com 12
The structure of GENEX Nastar GSMThe structure of GENEX Nastar GSM
Local network mode:
Offline mode:
In this mode, it is not required to install a database. In this mode, you can only
analyze neighbors and frequencies, but you cannot analyze the traffic statistic.
Online mode:
In this mode, it is not required to install a database. In this mode, you can
analyze the traffic statistic, neighbors, and frequencies. This mode, however,
cannot provide such functions as intelligent reports and performance alarms in
the version of server. In addition, it can only analyze the networks in a restricted
size.
Customer/Server mode
![Page 13: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/13.jpg)
Huawei confidential, 2007-04www.huawei.com 13
Introduction to the Functions of GENEX Nastar GSM
Installation of GENEX Nastar GSM •Installation of the Data Collection
Module•Installation of Nastar GSM•Installation of SQL Server
Introduction to the Operation of GENEX Nastar GSM
![Page 14: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/14.jpg)
Huawei confidential, 2007-04www.huawei.com 14
Installation of the Data Collection ModuleInstallation of the Data Collection Module
Installation of IISControl Panel —— Add/Delete a Component —— Install IIS (Install FTP Service)
Set FTP
Install Naconvert
Install IIS
![Page 15: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/15.jpg)
Huawei confidential, 2007-04www.huawei.com 15
Installation of the Data Collection ModuleInstallation of the Data Collection Module
FTP SettingControl Panel-Management Tools- Information Service- FTP Site Creation
![Page 16: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/16.jpg)
Huawei confidential, 2007-04www.huawei.com 16
Installation of the Data Collection ModuleInstallation of the Data Collection Module
FTP User SettingMy Computer — Computer Management — Local Users and Groups —Users
![Page 17: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/17.jpg)
Huawei confidential, 2007-04www.huawei.com 17
Installation of the Data Collection ModuleInstallation of the Data Collection Module
Installation of Naconvert
Copy Naconvert.exe and five DLLs (ziparch.dll, SHLWAPI.dll, MFC42.DLL, MSVCRT.DLL, and MSVCIRT.DLL) to \\OMC\BSC\BAM
Copy Naconvert.ini to \\OMC\BSC\public\initfile
Setting of the configuration files
°ü
![Page 18: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/18.jpg)
Huawei confidential, 2007-04www.huawei.com 18
Installation of Nastar GSMInstallation of Nastar GSM
Installation of Nastar Client
![Page 19: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/19.jpg)
Huawei confidential, 2007-04www.huawei.com 19
Installation of Nastar GSMInstallation of Nastar GSM
Installation of GENEX Shared
![Page 20: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/20.jpg)
Huawei confidential, 2007-04www.huawei.com 20
Installation of SQL ServerInstallation of SQL Server
The required version: SQL Server Standard+sp3
![Page 21: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/21.jpg)
Huawei confidential, 2007-04www.huawei.com 21
Setting of SQL ServerSetting of SQL Server
Step1: Set the services Step2: Set Autostart
Step3: Set the connection property
![Page 22: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/22.jpg)
Huawei confidential, 2007-04www.huawei.com 22
Introduction to the Functions of GENEX Nastar GSM
Installation of GENEX Nastar GSM
Introduction of the Operation of GENEX Nastar GSM
![Page 23: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/23.jpg)
Huawei confidential, 2007-04www.huawei.com 23
Introduction to the data sourceIntroduction to the data source
Project parameters
These parameters must contain the parameters: Cell Name, BTS
Longitude, BTS Altitude, LAC, CI, and Directional Angle
Configuration parameters
These parameters must contain the configuration data of the cell. They are
saved in BAM and the path is: \BSC\BAM\dbf
Traffic statistic data
These parameters are the basis of the performance analysis. They are
saved in BAM and the path is: \BSC\BAM\appsvr\stats\data
Project Par.
![Page 24: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/24.jpg)
Huawei confidential, 2007-04www.huawei.com 24
Introduction to the Software InterfaceIntroduction to the Software Interface
Site adding
Site information edition
Site deletion Cell deletion
Cell query
Co-BCCH Co-BSIC check
Idle frequency point check
Spectrum utilization analysis
Frequency point check – according to the frequency
point
Frequency point check – according to the cell
Neighbor analysis
Site view window
Attribute view window
Working area
![Page 25: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/25.jpg)
Huawei confidential, 2007-04www.huawei.com 25
Step5:Set Project configuration information
Project ManagementProject Management
Create a project
Step4:Add Project Name
Step3: Click Add
Step1: Star Nastar Step2:Click Setting
![Page 26: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/26.jpg)
Huawei confidential, 2007-04www.huawei.com 26
Project ManagementProject Management
Open a project
Step2: Choose the new project
Step3: Click OK
Step1: Choose Project->Open Project
![Page 27: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/27.jpg)
Huawei confidential, 2007-04www.huawei.com 27
Project ManagementProject Management
Set a project
Delete the project
Set the map
Project setting
![Page 28: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/28.jpg)
Huawei confidential, 2007-04www.huawei.com 28
Step4:Authority setting
Step3:Right click User -> Authority Setting
Step2:Right Click -> Add a User
User ManagementUser Management
User authority management
Step1:Project->User Management
![Page 29: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/29.jpg)
Huawei confidential, 2007-04www.huawei.com 29
Step4: Import configuration data
Step5: Import traffic statistic data
Step3: Import data dynamically
Step2: Create a BSC
Data ManagementData Management
Data import — import of configuration parameters and
traffic statistic data
Step1: Create a network
![Page 30: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/30.jpg)
Huawei confidential, 2007-04www.huawei.com 30
Data ManagementData Management
Data import — Project parameter import
The following parameters must match each other:
Cell Name, LAC, CI, BTS Longitude, BTS Altitude, and Antenna Directional Angel
![Page 31: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/31.jpg)
Huawei confidential, 2007-04www.huawei.com 31
Data ManagementData Management
Data Export
Select the data sources to be exported
Select the parameters to be exported
![Page 32: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/32.jpg)
Huawei confidential, 2007-04www.huawei.com 32
RNO AnalysisRNO AnalysisS
tart
Nas
tar
Cre
ate
Pro
ject
Imp
ort
Pro
ject
Dat
a
Import Configuration Data
Import Statistic Data
Import Project Parameter
Net
wor
k O
ptim
ize
Ana
lysi
s
Configuration Par. Check
Neighbors Analysis
Network Trend Analysis
Frequency Analysis
Network Monitor
Trouble Shooting
Ana
lysi
s R
epor
t
The analysis flow of Nastar GSM RNO
![Page 33: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/33.jpg)
Huawei confidential, 2007-04www.huawei.com 33
Step3:Select the check parameters
Check of Configuration Parameters Check of Configuration Parameters
Step2:Select the check objects
Step1:Analysis->RNP Check
![Page 34: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/34.jpg)
Huawei confidential, 2007-04www.huawei.com 34
Step3:Select the cells
Frequency AnalysisFrequency Analysis
Co-channel and adjacent channel check – check according to
the cell
Step1:Frequency Analysis->Co-fre. Adj-fre. Check
Step2:Select the check options
![Page 35: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/35.jpg)
Huawei confidential, 2007-04www.huawei.com 35
Step3: Set the frequency points to be
checked
Frequency AnalysisFrequency Analysis
Co-channel and adjacent channel check – check according to
the frequency point
Step1:Frequency Analysis->Co-fre. Adj-fre. Check
Step2: Set of the frequency arrange
![Page 36: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/36.jpg)
Huawei confidential, 2007-04www.huawei.com 36
Step3:Display the check results
Frequency AnalysisFrequency Analysis
Co-BCCH Co-BSIC check
Step1: Frequency Analysis->Co-BCCH Co-BSIC Check
Step2:Set the check conditions
![Page 37: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/37.jpg)
Huawei confidential, 2007-04www.huawei.com 37
Step4:Display the analysis results
Step3:Set the analysis conditions
Frequency AnalysisFrequency Analysis
Idle frequency point check
Step1:Frequency analysis->Idle ARFCNs
Step2: Select the analysis area
![Page 38: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/38.jpg)
Huawei confidential, 2007-04www.huawei.com 38
Step3:Display the analysis results
Frequency AnalysisFrequency Analysis
Spectrum utilization analysis
Step1:Frequency analysis->Spectrum Utilization
Step2:Set the analysis conditions
![Page 39: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/39.jpg)
Huawei confidential, 2007-04www.huawei.com 39
Step3:Select the analysis objects
Frequency AnalysisFrequency Analysis
Frequency optimization
Step1:Frequency analysis->Check Frequency Optimization
Step2:Set the analysis conditions
![Page 40: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/40.jpg)
Huawei confidential, 2007-04www.huawei.com 40
Neighbor AnalysisNeighbor Analysis
Neighbor query
Neighbor maintenance
Step1:Neighbor analysis-> Neighbors
Step2:Select the original cells to be queried
Step1:Display the neighbors
Step2:Modify the neighbors
Step3:Save the modified results
![Page 41: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/41.jpg)
Huawei confidential, 2007-04www.huawei.com 41
Step3:Display the check results
Neighbor AnalysisNeighbor Analysis
Neighbor checkCheck unidirectional neighbors and cells with fewer neighbors in the whole network
Step1:Neighbors Analysis->Check Unidirectional Neighbors
Step2:Display the query results in a list
Step3:Display the query results geographical
Step1:Neighbors Analysis->Check cells with fewer neighbors
Step2:Set the number of the neighbors
![Page 42: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/42.jpg)
Huawei confidential, 2007-04www.huawei.com 42
Step5:Export the planning results
Neighbor AnalysisNeighbor Analysis
Automatic neighbor planning
Step4:Set the attribute
Step2:Set the antenna information
Step3:Set the geographical type of the planning area
Step1:Neighbors Analysis-> Neighbor Autoplaning
![Page 43: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/43.jpg)
Huawei confidential, 2007-04www.huawei.com 43
Step5:Select the monitor indicators
Step6:Edit the monitor conditions
Step2:Set the monitor time
Step3:Select the monitor objects
Step4:Set the alarm conditions
Network Performance Monitoring Network Performance Monitoring
Performance indicator alarm
Step1:Right click to select the alarm indicators
![Page 44: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/44.jpg)
Huawei confidential, 2007-04www.huawei.com 44
Step5:Set the monitor objects
Step3:Set the monitor conditions
Step4:Select the monitor objects
Step2: Select the template
Network Performance MonitoringNetwork Performance Monitoring
Custom performance monitor indicators
Step1:Custom Alarm->New Alarm Task
![Page 45: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/45.jpg)
Huawei confidential, 2007-04www.huawei.com 45
Network Performance MonitoringNetwork Performance Monitoring
Introduction to performance
monitoring reports Network performance monitoring report -
TL
Count the network performance indicators and
analyze the trend of the network performance
within a week
Network monitoring report - Engineer
Count the TOP 10 cells in the network KPI
indicator, accessability, mobility, retainability,
and network resource utilization and analyze
the traffic statistic in detail, thus realizing a
deep location of the network problems
Network performance monitoring report –
Compare Report
Compare and analyze the network KPI
indicators of two weeks, thus realizing the
performance indicator monitoring after the
network optimization
![Page 46: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/46.jpg)
Huawei confidential, 2007-04www.huawei.com 46
Network Performance MonitoringNetwork Performance Monitoring
Performance monitoring reports
Step1:Select the analysis objects
Step2:Select the report type
Step3:Set the analysis time segment
Step5:Set the query time
Step4: Define the VIC area
![Page 47: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/47.jpg)
Huawei confidential, 2007-04www.huawei.com 47
Step7:Count and set the worst cells
Step6:Set the drawing indicators
Step5:Set the indicator thresholds
Step4:Set the TOPN capacity indicators
Network Performance MonitoringNetwork Performance Monitoring
Step3:Count and set the capacity indicators
Step2:Set the report type
Customized monitoring reports
Step1:Peformance Analysis->Report wizard
![Page 48: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/48.jpg)
Huawei confidential, 2007-04www.huawei.com 48
Deep Location of Network ProblemsDeep Location of Network Problems
Topics of the deep location of
network problems
Analysis of the performance KPI
indicators
Query cell/BSC–level KPI
indicators, analyze the trend of KPI
indicators, analyze the TOPN cells,
and filter the cells
Analysis of the access
performance
Deep location of access
performance problems
Analysis of the retainability
performance
Analyze SDCCH/TCH call drops
Analysis of the mobility
performance
Deep location of handover
problems
Analysis of the TRX performance
Analysis of TRX measurement reports
![Page 49: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/49.jpg)
Huawei confidential, 2007-04www.huawei.com 49
Step3:Set the analysis objects
Step2:Set the statistic time segment
Step1:Double click Task
Deep Location of Network ProblemsDeep Location of Network Problems
Implementation of the topic tasks
![Page 50: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/50.jpg)
Huawei confidential, 2007-04www.huawei.com 50
Step2:Set the report name
Step3:Set the statistic time and type
Step4:Set the busy hour and statistic type
Step5:Set the statistic objects
Step6:Set the statistic indicators
Analysis of the Traffic StatisticAnalysis of the Traffic Statistic
Enhanced traffic statistic
Step1:Performance Analysis->Traffic Statistic
![Page 51: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/51.jpg)
Huawei confidential, 2007-04www.huawei.com 51
Step2:Set the analysis arrange
Step3:Select the statistic objects
Analysis of the Network ResourcesAnalysis of the Network Resources
Statistic of the network resources
Step1:Project->Resource Stat.
![Page 52: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/52.jpg)
Huawei confidential, 2007-04www.huawei.com 52
Step3:Set the analysis objects
Step2:Set the parameters
Analysis of the Network ResourcesAnalysis of the Network Resources
Optimization of the network resources
Step1:Performance Analysis->WRO Report
![Page 53: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/53.jpg)
Huawei confidential, 2007-04www.huawei.com 53
Roadmap Plan for Nastar GSMRoadmap Plan for Nastar GSM
2007
2009- 2011
2008
Support of new features
Support of EDGE
Solutions to the network resource
analysis
Resource bottleneck analysis
Capacity expansion analysis
Remote network monitoring
solutions
Distributed data processing
Tiered performance monitoring
Flexible CS networking
Solutions to intelligent performance
optimization
Auto neighbor optimization
Auto frequency optimization
Solutions to CHR performance
analysis
Location of user-level problems
Processing of users’ complaints
Solutions to end-to-end
performance improvement
Analysis of operation and
decision
Solutions to the general
application of the data of
planning, drive test,
performance, and multi data
sources
Remote network monitoring
solutions
Flexible BS networking
Solutions to CHR performance
analysis
Analysis of the terminal
compatibility
Analysis of the users’ behavior
Analysis of the service
quality/subjective experience
Analysis of interfered matrix
Solutions to the network resource
analysis
Prediction of the network
development trend
Solutions to hybrid networking
Analysis of multi-system hybrid
networking
Analysis of multi-provider hybrid
networking
![Page 54: Introduction to GENEX Nastar GSM Issue1.0_doc8](https://reader035.fdocuments.net/reader035/viewer/2022081413/547e003bb4af9f2f6f8b4597/html5/thumbnails/54.jpg)
Huawei confidential, 2007-04www.huawei.com 54