Introducing DAQ

8/2/2019 Introducing DAQ

1/16

Introducing LMS SCADAS Lab


2/16

copyrightLMSInternational-2010

2

LMS SCADAS LabState-of-the-art Laboratory data acquisition system

Introducing the new member of the SCADAS Family

SCADASLab

Measurement Power&Data Quality

OptimizedInvestment

&Reliability

Increased data acquisition performance

more channels at higher sampling rates

Superior data quality for effective test execution

Efficiency&

Productivity

Fit-for-purpose laboratorysolution

AC power supply Low noise, fan-cooled

19 frame

Based on SCADAS Mobiletechnology

Several years proven trackrecord

Effective test set-up

Single device measures everything signal conditioning power

Seamless integration with Test.Labapplications

Flexibility in transducer connectivity

Introducing Lab-Mobility

Mix & match compatibility between

SCADAS Mobile/Recorder andSCADAS Lab frames


3/16


3


19 frame for indoor useSegment displays withdynamic content

High channel density, up to160 channels per frame

SCADAS Mobile technology inside,featuring high throughput rate &

superior data quality

Wide range of signal conditioning &flexibility in connectivity (CAMAC,

BNC, Sub-D)


4/16


4

Sustained14Msamples/sor 42 Mbyte/sthroughput rateindependent offrame &

channel count

LMS SCADAS LabMeasurement Power

0

2

4

6

8

10

12

14

16

18

20

0 32

64

96

128

160

192

224

256

288

320

352

384

416

448

480

512

544

576

608

640

672

704

736

768

800

832

864

896

928

960

992

# of channels

Thr

oughputrateMSamples/sec

High speed recording 204,800Hz Full Acoustic 51,200Hz Modal / Signature 6,400Hz SCL TP rate

SC3-V12 M/S (copper) SC3-V12 M/S (fiber optic) SC3-SP92 M/S (copper) SC3-SP92 M/S (fiber optic)

Support larger channel counts at higher sampling rates

Higher throughput rate (14Msamples/sec) compared to SCIII platform (8Msamples/sec)

No trade-off between channel count and frequency span

No trade-off between frame count and throughput rate

Prepared for higher throughput rate (26Msamples/sec)

Full acoustics272ch @ 51.2kHz

Prepared for 520ch

Structural dynamics & Rotating machinery1000+ch @ 6.4kHz

Increased

Power

large scale tests1000 ch

200 chSSL array

or ASQ

68 chwind tunnel &shock testing

Prepared fornew functions


5/16

copyrightLMSInter

national-2010

5

LMS SCADAS LabSuperior Data Quality

0.00001-180

0.00003-170

0.0001-160

0.0003-150

0.0010-140

0.0032-130

0.0100-120

0.0316-110

0.1000-100

0.3162-90

1-80

3-70

10-60

32-50

100-40

316-30

1000-20

3162-10

100000

mVMIC ICP [10 kHz]MIC [20 kHz]DC accel MEMS [100 Hz]DC accel cap [100 Hz]ICP accel[5 kHz]dB Strain gauge [100 Hz]

0.00001-180

0.00003-170

0.0001-160

0.0003-150

0.0010-140

0.0032-130

0.0100-120

0.0316-110

0.1000-100

0.3162-90

1-80

3-70

10-60

32-50

100-40

316-30

1000-20

3162-10

100000

mVMIC ICP [10 kHz]MIC [20 kHz]DC accel MEMS [100 Hz]DC accel cap [100 Hz]ICP accel[5 kHz]dB Strain gauge [100 Hz]

Typical SNR for several sensors

0.00 26000.00Hz

-200.00

0.00

-100.00

-150.00

-50.00

-190.00

-180.00

-170.00

-160.00

-140.00

-130.00

-120.00

-110.00

-90.00

-80.00

-70.00

-60.00

-40.00

-30.00

-20.00

-10.00

dBV

150 dB Dynamic Range

Typical harmonic distortion incompetitive systems

24 bit A/D conversion

150 dB Dynamic Range:

Superior Data Quality

No need for autoranging

Best-in-class limitation of

harmonic distortion

Additional manual ranging

Spurious free noise floor

down to -180 dB forextreme conditions

Best-in-class interchannel specs

Phase matchbetter than 0.2 @ 10 kHz

Crosstalk -123 dB @ 1 kHz


6/16

copyrightLMSInter

national-2010

6

SCM05


SCM02

Full M/S compatibility between anymember of the SCADAS Family

SCADAS Mobile

SCADAS Recorder SCADAS Lab

Offering a higher degree offlexibility in the lab

More efficient combination of Field

and Laboratory measurements

SCM09

SCR07SCL


7/16

copyrightLMSInter

national-2010

7


Example 1 more effective combination of Field and Laboratory Testing

M/S Connectivity


8/16

copyrightLMSInter

national-2010

8


Example 2 more flexibility in the laboratory

Testrig 1 Testrig 2 Testrig 3

M/S Connectivity

Special conditioning like:

Artificial head

Strain

CAN


9/16

copyrightLMSInter

national-2010

9

LMS SCADAS PlatformModular Signal Conditioning Concept


10/16


10

LMS SCADAS FamilyInput Modules

Eight channel Voltage / ICP / Bridge module (VB8)

The VB8 is the most versatile of the LMS SCADAS Mobile modules, supporting:

Voltage ICP / TEDS

Microphones

DC accelerometers (MEMS, piezoresistive)

Support of 1/1, and bridge configuration, with symmetrical supply sensing

Programmable bridge supply up to 10VDC Accurate bridge balancing through current injection

120 and 350 bridge completion

Internal shunt calibration, with a choice of four shunt resistor values

Force & pressure transducers

Potentiometers

Support of differential and single-ended active sensors

Versatility at its best


11/16


11


Four-channel Input Module for Rotational Vibration (RV4)

4 x Analog Tacho input

Differential analog tacho, pulse train TTL

2V, 20V, 0 Hz to 40 kHz

Up to 400 pulses/rev at 6000 rpm

4 x Digital Tacho input

TTL

0 Hz to 200 kHz


2 x Incremental Encoder input

RS485, supporting A, B and reference signals

+5V sensor supply with sense

0 Hz to 200 kHz


The complete rotating machinery solution


12/16


13/16


13


Dual channel CAN module (CN4)

Four CAN channel inputs

Each CAN channel can be individually configured for high-speed or low-speed CAN

Software selectable list of CAN channels to be measured with thedynamic channels

Eight-channel thermocouple module (T8)

The accurate cold junction compensation and on-board linearization provide a highdegree of accuracy over the thermocouple measurement range.

Standard miniature thermocouple connection

Channel selectable thermocouple type

Support for type B, E, J, K, N, R, S and T thermocouples

Up to 200 Hz sample rate for fast-changing thermocouple signals

Measure anything


14/16


14

Continued SCIII Support

SCIII frames can be purchased till end of 2011

SCIII modules can be purchased till end of 2012

Guaranteed support till end of 2018 (repairs/spare parts)

After that best effort continued support (excellent track record with SCADAS I & II)


15/16


15

SCL for Rotating machineryapplications

2 x Tacho

1 x IRIG-B

1 x CAN

Included in SCL20-SIG frame

SCL for Structural Dynamicsapplications

2 x DAC

1 x IRIG-B

Included in SCL20-STR frame

Mainframe

SCL for Vibration Controlapplications

2 x DAC

1 x STOP

1 x IRIG-B

Included in SCL20-ENV frame

SCL20-SIG SCL20-ENVSCL20-STR

SCL20-SIG + SCL-DAC4 allows combined rotating machinery & structural dynamic testing SCL20-STR + SCL-RV4 allows combined structural dynamic & rotating machinery & testing SCL20-ENV + SCL-DAC4 and/or SCL-RV4 allows combined Vibration control & rotating machinery/structural dynamic testing


16/16


16


Unifying all data acquisition systems for Lab and Field Testing

SCADASLab

Measurement Power&

Data Quality

OptimizedInvestment

&Reliability

150 dB dynamic range to capture low & high level signals without auto-ranging

14 MSamples/sec data transfer rate eliminating compromises between channel count vs. frequency span

Ready to tackle new NVH challenges high-channel-array sound source localization, strain-based interface forces,hybrid and electrical vehicles,...

Efficiency&

Productivity

High channel density per frame

100% compatibility with currentinvestment on LMS Test.Lab

Based on proven SCADAS Mobiletechnology

embedding 30+ years of data

acquisition hardware know-how

Mobility & flexibility in the laboratoryenvironment through arbitrary mix &match between SCM/R/L frames

single device measures everythingV, ICP, strain, CAN, IE, ...

flexibility in connectivity: BNC,

Sub-D, CAMAC

textual channel status feedback ondigital display for fast set-up

verification & correction

Introducing DAQ

Documents

Transcript of Introducing DAQ