Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc....

26
Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main Street, Cortland, NY 13045 Phone: 503-676-2311, Fax: 503-676-2350 Contact: John Voorhees or Melissa Arnell Web site: www.intertek.com, E-mail: [email protected] ; [email protected] Field Evaluation, Listing STANDARD DESCRIPTION C12.1 ANSI/NEMA Code for Electricity Metering C37.013 IEEE AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis C37.13.1 ANSI/IEEE Low Voltage AC Power Circuit Breakers Used in Enclosures C37.14 ANSI/IEEE Low Voltage DC Power Circuit Breakers Used in Enclosures C37.17 ANSI/IEEE Trip Devices for AC and General Purpose DC Low-Voltage Power Circuit Breakers C37.18 IEEE Enclosed Field Discharge Circuit Breakers for Rotating Electric Machinery C37.20.1 IEEE Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear C37.20.2 IEEE Standard for Metal-Clad Switchgear C37.20.3 IEEE Metal-Enclosed Interrupter Switchgear C37.21 IEEE Standard for Control Switchboards C37.23 IEEE Standard for Metal-Enclosed Bus C37.29 IEEE Standard for Low-Voltage AC Power Circuit Protectors Used in Enclosures C37.38 IEEE Standard for Gas Insulated, Metal-Enclosed Disconnecting, Interrupter, and Grounding Switches C37.42 IEEE Distribution Cutouts and Fuse Links C37.44 ANSI/IEEE Distribution Oil Cutouts and Fuse Links C37.45 ANSI/IEEE Distribution Enclosed Single-Pole Air Switches C37.46 ANSI/IEEE Power Fuses and Fuse Disconnecting Switches C37.47 ANSI/IEEE Distribution Fuse Disconnecting Switches, Fuse Supports, and Current- Limiting Fuses C37.50 ANSI/NEMA Low-Voltage AC Power Circuit Breakers Used in Enclosures -- Test Procedures C37.51 ANSI/NEMA Metal-Enclosed Low-Voltage AC Power Circuit-Breaker Switchgear Assemblies -- Conformance Test Procedures C37.52 ANSI/NEMA Low-Voltage AC Power Circuit Protectors Used in Enclosures -- Test Procedures C37.53.1 ANSI/IEEE High-Voltage Current Motor-Starter Fuses -- Conformance Test Procedures C37.54 ANSI/NEMA Indoor Alternating-Current High Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear Assemblies- Conformance Test Procedures C37.55 ANSI/NEMA Metal-Clad Switchgear Assemblies -- Conformance Test Procedures C37.57 ANSI/NEMA Metal-Enclosed Interrupter Switchgear Assemblies -- Conformance Testing C37.58 ANSI/NEMA Indoor AC Medium-Voltage Switches for Use in Metal-Enclosed Switchgear -- Conformance Test Procedures C37.60 IEEE Standard Requirements for Overhead, Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV C37.66 ANSI/IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV) C37.72 ANSI Manually-Operated Dead-Front, Pad-Mounted Switchgear with Load- Interrupting Switches and Separable Connectors for Alternating-Current System C37.90 IEEE Standard for Relays and Relay Systems Associated with Electric Power

Transcript of Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc....

Page 1: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024

Certification Office: 165 Main Street, Cortland, NY 13045 Phone: 503-676-2311, Fax: 503-676-2350

Contact: John Voorhees or Melissa Arnell Web site: www.intertek.com, E-mail: [email protected]; [email protected]

Field Evaluation, Listing

STANDARD DESCRIPTION C12.1 ANSI/NEMA Code for Electricity Metering C37.013 IEEE AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current

Basis C37.13.1 ANSI/IEEE Low Voltage AC Power Circuit Breakers Used in Enclosures C37.14 ANSI/IEEE Low Voltage DC Power Circuit Breakers Used in Enclosures C37.17 ANSI/IEEE Trip Devices for AC and General Purpose DC Low-Voltage Power Circuit

Breakers C37.18 IEEE Enclosed Field Discharge Circuit Breakers for Rotating Electric Machinery C37.20.1 IEEE Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear C37.20.2 IEEE Standard for Metal-Clad Switchgear C37.20.3 IEEE Metal-Enclosed Interrupter Switchgear C37.21 IEEE Standard for Control Switchboards C37.23 IEEE Standard for Metal-Enclosed Bus C37.29 IEEE Standard for Low-Voltage AC Power Circuit Protectors Used in Enclosures C37.38 IEEE Standard for Gas Insulated, Metal-Enclosed Disconnecting, Interrupter, and

Grounding Switches C37.42 IEEE Distribution Cutouts and Fuse Links C37.44 ANSI/IEEE Distribution Oil Cutouts and Fuse Links C37.45 ANSI/IEEE Distribution Enclosed Single-Pole Air Switches C37.46 ANSI/IEEE Power Fuses and Fuse Disconnecting Switches C37.47 ANSI/IEEE Distribution Fuse Disconnecting Switches, Fuse Supports, and Current-

Limiting Fuses C37.50 ANSI/NEMA Low-Voltage AC Power Circuit Breakers Used in Enclosures -- Test

Procedures C37.51 ANSI/NEMA Metal-Enclosed Low-Voltage AC Power Circuit-Breaker Switchgear

Assemblies -- Conformance Test Procedures C37.52 ANSI/NEMA Low-Voltage AC Power Circuit Protectors Used in Enclosures -- Test

Procedures C37.53.1 ANSI/IEEE High-Voltage Current Motor-Starter Fuses -- Conformance Test Procedures C37.54 ANSI/NEMA Indoor Alternating-Current High Voltage Circuit Breakers Applied as

Removable Elements in Metal-Enclosed Switchgear Assemblies-Conformance Test Procedures

C37.55 ANSI/NEMA Metal-Clad Switchgear Assemblies -- Conformance Test Procedures C37.57 ANSI/NEMA Metal-Enclosed Interrupter Switchgear Assemblies -- Conformance Testing C37.58 ANSI/NEMA Indoor AC Medium-Voltage Switches for Use in Metal-Enclosed Switchgear --

Conformance Test Procedures C37.60 IEEE Standard Requirements for Overhead, Pad-Mounted, Dry Vault, and

Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV

C37.66 ANSI/IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV)

C37.72 ANSI Manually-Operated Dead-Front, Pad-Mounted Switchgear with Load-Interrupting Switches and Separable Connectors for Alternating-Current System

C37.90 IEEE Standard for Relays and Relay Systems Associated with Electric Power

Page 2: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

Apparatus C37.121 ANSI/IEEE Unit Substations -- Requirements C37.122 IEEE Gas-Insulated Substations C57.12.00 IEEE General Requirements For Liquid Immersed, Distribution, Power And

Regulating Transformers C57.12.01 IEEE General Requirements for Dry-Type Distribution and Power Transformers

Including Those with Solid-Cast and/or Resin Encapsulated Windings C57.12.20 IEEE Standard for Overhead-Type Distribution Transformers, 500 kVA and Smaller:

High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below C57.12.22 ANSI/IEEE Pad-Mounted Compartmental-Type, Self-Cooled, Three-Phase Distribution

Transformers with High Voltage Bushings; 2500 kVA and Smaller: High-Voltage, 34500 GrdY/19920 Volts and Below; Low Voltage, 480 Volts and Below

C57.12.23 IEEE Standard for Underground-Type, Self-Cooled, Single-Phase, Distribution Transformers with Separable Insulated High-Voltage Connectors; High Voltage 25000 V and Below; Low-Voltage 600 V and Below; 167 kVA and Smaller

C57.12.24 ANSI/IEEE Underground-Type Three-Phase Distribution Transformers, 2500 kVA and Smaller

C57.12.25 ANSI/IEEE Transformers Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformers with Separable Insulated High-Voltage Connectors; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 240/120 Volts; 167 kVA and Smaller Requirements

C57.12.26 ANSI/IEEE Pad-Mounted Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers for Use w/ Separable Insulated High-Voltage Connectors, High-Voltage, 34 500 Grd Y/19 920 Volts and Below; 2500 kVA and Smaller, Requirements

C57.12.28 IEEE Switchgear and Transformers -- Pad-Mounted Equipment -- Enclosure Integrity

C57.12.38 IEEE Transformers Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformers with Separable Insulated High-Voltage Connectors; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 240/120 Volts; 167 kVA and Smaller Requirements

C57.12.40 ANSI/IEEE Three Phase Secondary Network Transformers, Subway and Vault Types (Liquid Immersed); 2500 kVA and Smaller

C57.12.50 ANSI/IEEE Requirements for Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, single-Phase, and 15 to 500 kVA, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 120 to 600 Volts

C57.12.51 ANSI/IEEE Standard for Ventilated Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 V to 34 500 V; Low-Voltage 208Y/120 V to 4160

C57.12.52 ANSI/IEEE Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts

C57.12.55 ANSI/IEEE Dry-Type Transformers in Unit Installations, Including Unit Substations - Conformance Standard

C57.12.57 ANSI/IEEE Transformers--Ventilated Dry-Type Network Transformers 2500 kVA and Below, Three-Phase, with High-Voltage 34 500 Volts and Below, Low-Voltage 216Y/125 and 480Y/277 Volts-Requirements

C57.12.90 IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers

C57.12.91 IEEE Standard Test Code for Dry-Type Distribution and Power Transformers C57.13 IEEE Standard Requirements for Instrument Transformers

Page 3: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

C57.13.2 IEEE Standard for Conformance Test Procedure for Instrument Transformers C57.15 ANSI/IEEE Standard Requirements, Terminology, and Test Code for Step-Voltage

Regulators C57.21 IEEE Standard Requirements, Terminology, and Test Code for Shunt Reactors

Rated Over 500 kVA C62.11 IEEE Standard for Metal Oxide Surge Arresters for AC Power Circuits (>1 kV) ANSI K61.1 Storage and Handling of Anhydrous Ammonia (CGA G-2.1) ANSI Z21.1 Household Cooking Gas Appliances ANSI Z21.5.1 Gas Clothes Dryers--Type 1 ANSI Z21.5.2 Gas Clothes Dryers--Type 2 ANSI Z21.10.1 Gas Water Heaters--Automatic Storage Type Water Heaters with Inputs of

70,000 Btu Per Hour or Less ANSI Z21.10.3 Water Heaters--Circulating Tank, Instantaneous and Large Automatic Storage

Type Water Heaters ANSI Z21.11.2 Gas-Fired Room Heaters--Unvented Room Heaters ANSI Z21.13 Gas-Fired Low-Pressure Steam and Hot Water Heating Boilers ANSI Z21.15 Manually Operated Gas Valves ANSI Z21.17 Domestic Gas Conversion Burners ANSI Z21.18 Gas Appliance Pressure Regulators ANSI Z21.19 Refrigerators Using Gas Fuel ANSI Z21.20 Automatic Gas Ignition Systems and Components ANSI Z21.21 Automatic Valves for Gas Appliances ANSI Z21.22 Relief Valves and Automatic Gas Shutoff Devices for Hot Water Supply

System ANSI Z21.23 Gas Appliance Thermostats ANSI Z21.24 Metal Connectors for Gas Appliances ANSI Z21.35 Gas Filters on Appliances ANSI Z21.40.1 Gas-Fired Absorption Summer Air Conditioning Appliances ANSI Z21.41 Quick-Disconnect Devices for Use with Gas Fuel ANSI Z21.42 Gas-Fired Illuminating Appliances ANSI Z21.47 Gas-Fired Gravity and Forced Air Central Furnaces ANSI Z21.50 Vented Decorative Gas Appliances ANSI Z21.54 Gas Hose Connectors for Portable Outdoor Gas-Fired Appliances ANSI Z21.56 Gas-Fired Pool Heaters ANSI Z21.57 Recreational Vehicle Cooking Gas Appliances ANSI Z21.58 Outdoor Cooking Gas Appliances ANSI Z21.60 Decorative Gas Appliances for Installation in Vented Fireplaces ANSI Z21.66 Automatic Vent Damper Devices for Use With Gas-Fired Appliances ANSI Z21.69 Connectors for Movable Gas Appliances ANSI Z21.74 Portable Refrigerators for Use With HD-5 Propane Gas ANSI Z21.76 Gas-Fired Unvented Catalytic Room Heaters for Use With Liquefied

Petroleum (LP) Gases ANSI Z83.4 Direct Gas-Fired Make-Up Air Heaters ANSI Z83.7 Gas-Fired Construction Heater ANSI Z83.8 Gas Unit Heaters ANSI Z83.11 Gas Food Service Equipment--Ranges and Unit Broilers ANSI Z83.18 Direct Gas Fired Industrial Air Heaters ANSI/BHMA A156.3 Exit Devices ASME A17.5 Elevators and Escalator Electrical Equipment IEC 60335-2-76 Household and Similar Electrical Appliances - Safety - Part 2-76: Particular

Requirements for Electric Fence Energizers IEC 61400-1 Wind Turbines-Design Requirements IEC 61400-2 Design Requirements For Small Wind Turbines

Page 4: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

IEC 61400-13 Wind Turbines-Measurement Of Mechanical Loads NFPA 11 Low Expansion Foam and combined Agent Systems NFPA 11A Medium- and High-Expansion Foam Systems NFPA 12 Carbon Dioxide Extinguishing Systems NFPA 12A Halon 1301 Fire Extinguishing Agent Systems NFPA 13 Installation of Sprinkler Systems NFPA 17 Dry Chemical Extinguishing Systems NFPA 20 Centrifugal Fire Pumps NFPA 70 National Electrical Code (NOT USED AS THE PRIMARY STANDARD) NFPA 72 Installation, Maintenance, and Use of Protective Signaling Systems NFPA 79 Electrical Standard for Industrial Machinery NFPA 496 Standard for Purged and Pressurized Enclosures for Electrical Equipment NFPA 497 Classification of Flammable Liquids, Gases, or Vapors and of Hazardous

(Classified) Locations for Electrical Installations in Chemical Process Areas RVIA EGS1:2003 Engine Generator Sets (for Recreation Vehicle Requirements)

SUPERSEDED BY RVIA EGS1:2008 UL 1 Standard for Flexible Metal Conduit UL 4 Standard for Armored Cable UL 5 Standard for Surface Metal Raceways and Fittings UL 5A Nonmetallic Surface Raceways and Fittings UL 5B Standard for Strut-Type Channel Raceways and Fittings UL 5C Standard for Surface Raceways and Fittings for Use with Data, Signal, and

Control Circuits UL 6 Electrical Rigid Metal Conduit - Steel UL 6A Electrical Rigid Metal Conduit - Aluminum, Red Brass, and Stainless Steel UL 8 Water Based Agent Fire Extinguishers UL 9 Standard for Fire Tests of Window Assemblies UL 10A Standard for Tin-Clad Fire Doors UL 10B Standard for Fire Tests of Door Assemblies UL 10C Standard for Positive Pressure Fire Tests of Door Assemblies UL 13 Standard for Power-Limited Circuit Cables UL 14B Standard for Sliding Hardware for Standard, Horizontally Mounted Tin-Clad

Fire Doors UL 14C Standard for Swinging Hardware for Standard Tin-Clad Fire Doors Mounted

Singly and in Pairs UL 17 Standard for Vent or Chimney Connector Dampers for Oil-Fired Appliances UL 19 Standard for Lined Fire Hose and Hose Assemblies UL 20 General-Use Snap Switches UL 21 Standard for LP-Gas Hose UL 22 Standard for Amusement and Gaming Machines UL 25 Standard for Meters for Flammable and Combustible Liquids and LP-Gas UL 30 Standard for Metal Safety Cans UL 32 Standard for Metal Waste Cans UL 33 Standard for Heat Responsive Links for Fire-Protection Service UL 38 Standard for Manual Signaling Boxes for Fire Alarm Systems UL 44 Thermoset-Insulated Wires and Cables UL 47 Standard for Semiautomatic Fire Hose Storage Devices UL 48 Standard for Electric Signs UL Subject 48a Neon Signs for Use in Dwellings (Residential) Outline of Investigation UL 50 Enclosures for Electrical Equipment, Non-Environmental Considerations UL 50E Enclosures for Electrical Equipment, Environmental Considerations UL 51 Standard for Power-Operated Pumps for Anhydrous Ammonia and LP-Gas UL 55A Standard for Materials for Built-Up Roof Coverings

Page 5: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL 58 Standard for Steel Underground Tanks for Flammable and Combustible Liquids

UL 62 Standard for Flexible Cords and Cables UL 65 Standard for Wired Cabinets UL 66 Standard for Fixture Wire UL 67 Standard for Panelboards UL 69 Standard for Electric-Fence Controllers UL 70 Standard for Septic Tanks, Bituminous-Coated Metal UL 72 Standard for Tests for Fire Resistance of Record Protection Equipment UL 73 Standard for Motor-Operated Appliances UL 79 Standard for Power-Operated Pumps for Petroleum Dispensing Products UL 80 Standard for Steel Tanks for Oil-Burner Fuels and Other Combustible Liquids UL 82 Standard for Electric Gardening Appliances UL 83 Thermoplastic-Insulated Wires and Cables UL 87 Standard for Power-Operated Dispensing Devices for Petroleum Products UL Subject 87a Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol

Blends with Nominal Ethanol Concentrations Up To 85 Percent Outline of Investigation

UL 92 Standard for Fire Extinguisher and Booster Hose UL 94 Standard for Tests for Flammability of Plastic Materials for Parts in Devices

and Appliances UL 96 Standard for Lightning Protection Components UL 96A Standard for Installation Requirements for Lightning Protection Systems UL 98 Enclosed and Dead-Front Switches UL Subject 98a Open Type Switches Outline of Investigation UL 98B Enclosed and Dead-Front Switches for Use In Photovoltaic Systems UL 101 Leakage Current for Appliances UL 103 Standard for Factory-Built Chimneys for Residential Type and Building

Heating Appliances UL 104 Standard for Elevator Door Locking Devices and Contacts UL 108 Environmental Claim Validation Procedure for Estimating Energy Savings for

Energy Saving Power Strips UL 109 Standard for Tube Fittings for Flammable and Combustible Fluids,

Refrigeration Service, and Marine Use UL Subject 110 Standard for Sustainability for Mobile Phones Outline of Investigation UL Subject 115 Standard for Sustainability for Thermal Insulation Outline of Investigation UL 122 Standard for Photographic Equipment UL 123 Standard for Oxy-Fuel Gas Torches UL 125 Standard for Flow Control Valves for Anhydrous Ammonia and LP-Gas UL 127 Standard for Factory-Built Fireplaces UL 130 Standard for Electric Heating Pads UL 132 Standard for Safety Relief Valves for Anhydrous Ammonia and LP-Gas UL 136 Standard for Pressure Cookers UL 140 Standard for Relocking Devices for Safes and Vaults UL 141 Standard for Garment Finishing Appliances UL 142 Standard for Steel Aboveground Tanks for Flammable and Combustible

Liquids UL 144 Standard for LP-Gas Regulators UL 147 Standard for Hand-Held Torches for Fuel Gases UL 147A Standard for Nonrefillable (Disposable) Type Fuel Gas Cylinder Assemblies UL 147B Standard for Nonrefillable (Disposable) Type Metal Container Assemblies for

Butane UL 150 Standard for Antenna Rotators

Page 6: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL 153 Standard for Portable Electric Luminaires UL 154 Carbon-Dioxide Fire Extinguishers UL 155 Standard for Tests for Fire Resistance of Vault and File Room Doors UL 157 Standard for Gaskets and Seals UL 162 Standard for Safety for Foam Equipment and Liquid Concentrates UL 174 Standard for Household Electric Storage Tank Water Heaters UL 180 Standard for Liquid-Level Indicating Gauges for Oil Burner Fuels UL 181 Standard for Factory-Made Air Ducts and Air Connectors UL 181A Standard for Closure Systems for Use With Rigid Air Ducts UL 181B Standard for Closure Systems for Use With Flexible Air Ducts and Air

Connectors UL 183 Standard for Manufactured Wiring Systems UL 193 Standard for Alarm Valves for Fire-Protection Service UL 194 Standard for Gasketed Joints for Ductile-Iron Pipe and Fittings for Fire

Protection Service UL 197 Standard for Commercial Electric Cooking Appliances UL 198M Standard for Mine-Duty Fuses UL 199 Standard for Automatic Sprinklers for Fire-Protection Service UL 201 Standard for Garage Equipment UL Subject 201A Powered And Non-Powered Cabinets for Use in Service Garages Outline of

Investigation UL 203 Standard for Pipe Hanger Equipment for Fire Protection Service UL 207 Standard for Refrigerant-Containing Components and Accessories,

Nonelectrical UL 209 Standard for Cellular Metal Floor Raceways and Fittings UL 213 Standard for Rubber Gasketed Fittings for Fire-Protection Service UL 217 Standard for Single and Multiple Station Smoke Alarms UL 218 Standard for Fire Pump Controllers UL 218A Standard for Battery Contactors for Use in Diesel Engines Driving Centrifugal

Fire Pumps UL 219 Standard for Lined Fire Hose for Interior Standpipes UL 224 Extruded Insulating Tubing UL 228 Standard for Door Closers-Holders, With or Without Integral Smoke Detectors UL 231 Standard for Power Outlets UL 234 Standard for Low Voltage Lighting Fixtures for Use in Recreational Vehicles UL 242 Standard for Nonmetallic Containers for Waste Paper UL 244A Standard for Solid-State Controls for Appliances UL 246 Standard for Hydrants for Fire-Protection Service UL Subject 246B Tamper Resistant Features of Hydrants for Fire-Protection Service Outline of

Investigation UL 248-1 Low-Voltage Fuses - Part 1: General Requirements UL 248-2 Low-Voltage Fuses - Part 2: Class C Fuses UL 248-3 Low-Voltage Fuses - Part 3: Class CA and CB Fuses UL 248-4 Low-Voltage Fuses - Part 4: Class CC Fuses UL 248-5 Low-Voltage Fuses - Part 5: Class G Fuses UL 248-6 Low-Voltage Fuses - Part 6: Class H Non-Renewable Fuses UL 248-7 Low-Voltage Fuses - Part 7: Class H Renewable Fuses UL 248-8 Low-Voltage Fuses - Part 8: Class J Fuses UL 248-9 Low-Voltage Fuses - Part 9: Class K Fuses UL 248-10 Low-Voltage Fuses - Part 10: Class L Fuses UL 248-11 Low-Voltage Fuses - Part 11: Plug Fuses UL 248-12 LOW-Voltage Fuses - Part 12: Class R Fuses UL 248-13 Low-Voltage Fuses - Part 13: Semiconductor Fuses UL 248-14 Low-Voltage Fuses - Part 14: Supplemental Fuses

Page 7: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL 248-15 Low-Voltage Fuses - Part 15: Class T Fuses UL 248-16 Low-Voltage Fuses - Part 16: Test Limiters UL Subject 248-17 Low-Voltage Fuses - Part 17: Class CF Fuses Outline of Investigation UL 250 Household Refrigerators and Freezers UL 252 Standard for Compressed Gas Regulators UL 252A Standard for Compressed Gas Regulator Accessories UL 260 Standard for Dry Pipe and Deluge Valves for Fire-Protection Service UL 262 Standard for Gate Valves for Fire-Protection Service UL 263 Standard for Fire Tests of Building Construction and Materials UL 268 Standard for Smoke Detectors for Fire Alarm Signaling Systems UL 268A Standard for Smoke Detectors for Duct Application UL Subject 268C Multi-Detector Test Apparatus Outline of Investigation UL 275 Standard for Automotive Glass-Tube Fuses UL 283 Standard for Air Fresheners and Deodorizers UL 291 Standard for Automated Teller Systems UL 294 Standard for Access Control System Units UL Subject 294b Power Over Ethernet (POE) Outline of Investigation UL 295 Standard for Commercial-Industrial Gas Burners UL 296 Standard for Oil Burners UL 296A Standard for Waste Oil-Burning Air-Heating Appliances UL 298 Portable Electric Hand Lamps UL 299 Dry Chemical Fire Extinguishers UL Subject 299D Dry Chemical Fire Extinguishers for Residential Cooking Equipment Outline

of Investigation UL 300 Standard for Fire Testing of Fire Extinguishing Systems for Protection of

Commercial Cooking Equipment UL 305 Standard for Panic Hardware UL 307A Standard for Liquid Fuel-Burning Heating Appliances for Manufactured

Homes and Recreational Vehicles UL 307B Standard for Gas-Burning Heating Appliances For Manufactured Homes and

Recreational Vehicles UL 310 Standard for Electrical Quick-Connect Terminals UL 312 Standard for Check Valves for Fire-Protection Service UL 325 Standard for Door, Drapery, Gate, Louver, and Window Operators and

Systems UL Subject 327 Turbine Type Flow Meters for Fire Protection Systems Outline of

Investigation UL Subject 327B Ultrasonic and Magnetic Type Water Flow Meters Outline of Investigation UL 330 Standard for Hose and Hose Assemblies for Dispensing Flammable Liquids UL 331 Standard for Strainers for Flammable Fluids and Anhydrous Ammonia UL 340 Standard for Tests for Comparative Flammability of Liquids UL 343 Standard for Pumps for Oil-Burning Appliances UL 346 Standard for Waterflow Indicators for Fire Protective Signaling Systems UL 347 Standard for Medium-Voltage AC Contactors, Controllers, and Control

Centers UL Subject 347A Medium Voltage Power Conversion Controllers Outline of Investigation UL Subject 347b Medium Voltage Motor Controllers, Up To 15kv Outline of Investigation UL 352 Standard for Constant-Level Oil Valves UL 353 Standard for Limit Controls UL 355 Standard for Cord Reels UL 360 Standard for Liquid-Tight Flexible Steel Conduit UL 363 Knife Switches UL 365 Standard for Police Station Connected Burglar Alarm Units and Systems

Page 8: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL 372 Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Burner Ignition Systems and Components

UL 378 Standard for Draft Equipment UL Subject 379 Power Units for Fountain, Swimming Pool, and Spa Luminaires Outline of

Investigation UL 385 Standard for Play Pipes for Water Supply Testing in Fire Protection Service UL 391 Standard for Solid-Fuel and Combination-Fuel Central and Supplementary

Furnaces UL 393 Standard for Indicating Pressure Gauges for Fire-Protection Service UL 399 Standard for Drinking-Water Coolers UL 401 Standard for Portable Spray Hose Nozzles for Fire-Protection Service UL 404 Standard for Gauges, Indicating Pressure, for Compressed Gas Service UL 405 Standard for Fire Department Connections UL 407 Standard for Manifolds for Compressed Gases UL 410 Standard for Slip Resistance of Floor Surface Materials UL 412 Standard for Refrigeration Unit Coolers UL 414 Standard for Meter Sockets UL 416 Standard for Refrigerated Medical Equipment UL 427 Standard for Refrigerating Units UL 429 Standard for Electrically Operated Valves UL 430 Standard for Waste Disposers UL 437 Standard for Key Locks UL 441 Standard for Gas Vents UL 443 Standard for Steel Auxiliary Tanks for Oil-Burner Fuel UL 444 Communications Cables UL 448 Standard for Centrifugal Stationary Pumps for Fire-Protection Service UL 448A Flexible Couplings And Connecting Shafts For Fire Pumps UL 448B Residential Fire Pumps Intended For One- And Two-Family Dwellings And

Manufactured Homes UL 448C Standard for Stationary, Rotary-Type, Positive-Displacement Pumps for Fire-

Protection Service UL 452 Standard for Antenna - Discharge Units UL 458 Standard for Power Converters/Inverters and Power Converter/Inverter

Systems for Land Vehicles and Marine Crafts UL 462 Standard for Heat Reclaimers for Gas-, Oil-, or Solid Fuel-Fired Appliances UL 464 Standard for Audible Signal Appliances UL 466 Standard for Electric Scales UL 467 Grounding and Bonding Equipment UL 469 Standard for Musical Instruments and Accessories UL 471 Standard for Commercial Refrigerators and Freezers UL 474 Standard for Dehumidifiers UL 482 Standard for Portable Sun/Heat Lamps UL 484 Standard for Room Air Conditioners UL 486A-486B Wire Connectors (Copper Conductors-Aluminum Conductors) UL 486C Splicing Wire Connectors UL 486D Sealed Wire Connector Systems UL 486E Standard for Equipment Wiring Terminals for Use with Aluminum and/or

Copper Conductors UL 489 Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker

Enclosures UL 489A Standard for Circuit Breakers for Use in Communications Equipment UL Subject 489B Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker

Enclosures for Use With Photovoltaic (PV) Systems Outline of Investigation

Page 9: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL 493 Standard for Thermoplastic-Insulated Underground Feeder and Branch-Circuit Cables

UL 495 Standard for Power-Operated Dispensing Devices for LP-Gas UL 496 Lampholders UL 497 Standard for Protectors for Paired-Conductor Communications Circuits UL 497A Standard for Secondary Protectors for Communications Circuits UL 497B Standard for Protectors for Data Communications and Fire-Alarm Circuits UL 497C Standard for Protectors for Coaxial Communications Circuits UL Subject 497E Protectors for Antenna Lead-In Conductors Outline of Investigation UL 498 Standard for Attachment Plugs and Receptacles UL 498A Current Taps and Adapters UL 499 Standard for Electric Heating Appliances UL 506 Standard for Specialty Transformers UL 507 Standard for Electric Fans UL 508 Standard for Industrial Control Equipment UL 508A Standard for Industrial Control Panels UL Subject 508B Relays Used in Information Technology Equipment Outline of Investigation UL 508C Standard for Power Conversion Equipment UL Subject 509 Bus Drop Cable Outline of Investigation UL 510 Standard for Polyvinyl Chloride, Polyethylene and Rubber Insulating Tape UL 512 Standard for Fuseholders UL 514A Metallic Outlet Boxes UL 514B Conduit, Tubing, and Cable Fittings UL 514C Standard for Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers UL 514D Cover Plates for Flush-Mounted Wiring Devices UL 515 Standard for Electrical Resistance Heat Tracing for Commercial and Industrial

Applications UL 521 Standard for Heat Detectors for Fire Protective Signaling Systems UL 525 Standard for Flame Arresters UL 536 Standard for Flexible Metallic Hose UL 539 Standard for Single and Multiple Station Heat Alarms UL 541 Standard for Refrigerated Vending Machines UL 542 Standard for Fluorescent Lamp Starters UL 544 Standard for Medical and Dental Equipment UL 551 Standard for Transformer-Type Arc-Welding Machines UL 555 Standard for Fire Dampers UL 555C Standard for Ceiling Dampers UL 555S Standard for Smoke Dampers UL 558 Standard for Industrial Trucks, Internal Combustion Engine-Powered UL 561 Standard for Floor-Finishing Machines UL 563 Standard for Ice Makers UL 565 Standard for Liquid-Level Gauges and Indicators for Anhydrous Ammonia and

LP-Gas UL 567 Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-

Connection Fittings for Petroleum Products and LP-Gas UL 568 Nonmetallic Cable Tray Systems UL 569 Standard for Pigtails and Flexible Hose Connectors for LP-Gas UL 574 Standard for Electric Oil Heaters UL 580 Standard for Tests for Uplift Resistance of Roof Assemblies UL 583 Standard for Electric-Battery-Powered Industrial Trucks UL 586 Standard for High-Efficiency, Particulate, Air Filter Units UL 588 Standard for Seasonal and Holiday Decorative Products UL 595 Marine-Type Electric Lighting Fixtures

Page 10: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL 603 Standard for Power Supplies for Use with Burglar-Alarm Systems UL 606 Standard for Linings and Screens for Use with Burglar-Alarm Systems UL 608 Standard for Burglary Resistant Vault Doors and Modular Panels UL 609 Standard for Local Burglar Alarm Units and Systems UL 618 Standard for Concrete Masonry Units UL 621 Standard for Ice Cream Makers UL 626 Water Fire Extinguishers UL 632 Standard for Electrically-Actuated Transmitters UL 634 Standard for Connectors and Switches for Use with Burglar-Alarm Systems UL 635 Standard for Insulating Bushings UL 636 Standard for Holdup Alarm Units and Systems UL 639 Standard for Intrusion-Detection Units UL 641 Standard for Type L Low-Temperature Venting Systems UL 644 Standard for Container Assemblies for LP-Gas UL 647 Standard for Unvented Kerosene-Fired Room Heaters and Portable Heaters UL Subject 647A Synthetic Fuels for Listed Kerosene-Fired Portable Heaters and Kerosene-

Fired Room Heaters Outline of Investigation UL 651 Standard for Schedule 40 and 80 Rigid PVC Conduit and Fittings UL 651A Type EB and A Rigid PVC Conduit and HDPE Conduit UL 651B Standard for Continuous Length HDPE Conduit UL 664 Standard for Commercial Dry-Cleaning Machines (Type IV) UL 668 Standard for Hose Valves for Fire-Protection Service UL 674 Standard for Electric Motors and Generators for Use in Division 1 Hazardous

(Classified) Locations UL 676 Standard for Underwater Luminaires and Submersible Junction Boxes UL 680 Standard for Emergency Vault Ventilators and Vault-Ventilating Ports UL 681 Standard for Installation and Classification of Burglar and Holdup Alarm

Systems UL 687 Standard for Burglary-Resistant Safes UL 696 Standard for Electric Toys UL 697 Standard for Toy Transformers UL 698 Standard for Industrial Control Equipment For Use In Hazardous (Classified)

Locations UL 698A Standard for Industrial Control Panels Relating to Hazardous (Classified)

Locations UL 705 Standard for Power Ventilators UL 710 Standard for Exhaust Hoods for Commercial Cooking Equipment UL 710B Standard for Recirculating Systems UL 711 Rating and Fire Testing of Fire Extinguishers UL Subject 714 Testing Outline for Ml Outline of Investigation UL 719 Standard for Nonmetallic-Sheathed Cables UL 723 Standard for Test for Surface Burning Characteristics of Building Materials UL 726 Standard for Oil-Fired Boiler Assemblies UL 727 Standard for Oil-Fired Central Furnaces UL 729 Standard for Oil-Fired Floor Furnaces UL 730 Standard for Oil-Fired Wall Furnaces UL 731 Standard for Oil-Fired Unit Heaters UL 732 Standard for Oil-Fired Storage Tank Water Heaters UL 733 Standard for Oil-Fired Air Heaters and Direct-Fired Heaters UL 737 Standard for Fireplace Stoves UL 745-1 Portable Electric Tools UL 745-2-1 Particular Requirements for Drills UL 745-2-2 Particular Requirements for Screwdrivers and Impact Wrenches

Page 11: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL 745-2-3 Particular Requirements for Grinders, Polishers and Disk-Type Sanders UL 745-2-4 Particular Requirements for Sanders UL 745-2-5 Particular Requirements for Particular Requirements for Circular Saws and

Circular Knives UL 745-2-6 Particular Requirements for Hammers UL 745-2-8 Particular Requirements for Shears and Nibblers UL 745-2-9 Particular Requirements for Tappers UL 745-2-11 Particular Requirements for Reciprocating Saws UL 745-2-12 Particular Requirements for Concrete Vibrators UL 745-2-14 Particular Requirements for Planers UL 745-2-17 Particular Requirements for Routers and Trimmers UL 745-2-30 Particular Requirements for Staplers UL 745-2-31 Particular Requirements for Diamond Core Drills UL 745-2-32 Particular Requirements for Magnetic Drill Presses UL 745-2-33 Particular Requirements for Portable Bandsaws UL 745-2-34 Particular Requirements for Strapping Tools UL 745-2-35 Particular Requirements for Drain Cleaners UL 745-2-36 Particular Requirements for Hand Motor Tools UL 745-2-37 Particular Requirements for Plate Jointers UL 745-3 Portable Battery-Operated Tools UL 745-4-1 Particular Requirements for Battery-Operated Drills UL 745-4-2 Particular Requirements for Screwdrivers and Impact Wrenches UL 745-4-3 Particular Requirements for Battery-Operated Grinders, Polishers, and Disk-

Type Sanders UL 745-4-4 Particular Requirements for Battery-Operated Sanders UL 745-4-5 Particular Requirements for Battery-Operated Circular Saws and Circular

Knives UL 745-4-6 Particular Requirements for Battery-Operated Hammers UL 745-4-8 Particular Requirements for Battery-Operated Shears and Nibblers UL 745-4-11 Particular Requirements for Battery-Operated Reciprocating Saws UL 745-4-14 Particular Requirements for Battery-Operated Planers UL 745-4-17 Particular Requirements for Battery-Operated Routers and Trimmers UL 745-4-35 Particular Requirements for Battery-Operated Drain Cleaners UL 745-4-36 Particular Requirements for Battery-Operated Hand Motor Tools UL 746A Standard for Polymeric Materials - Short Term Property Evaluations UL 746B Standard for Polymeric Materials - Long Term Property Evaluations UL 746C Standard for Polymeric Materials - Use in Electrical Equipment Evaluations UL 746D Standard for Polymeric Materials - Fabricated Parts UL 746E Standard for Polymeric Materials - Industrial Laminates, Filament Wound

Tubing, Vulcanized Fibre, and Materials Used In Printed-Wiring Boards UL 746F Standard for Polymeric Materials - Flexible Dielectric Film Materials for Use in

Printed-Wiring Boards and Flexible Materials Interconnect Constructions UL 749 Household Dishwashers UL 751 Standard for Vending Machines UL 752 Standard for Bullet-Resisting Equipment UL 753 Standard for Alarm Accessories for Automatic Water-Supply Control Valves

for Fire-Protection Service UL 756 Standard for Coin and Currency Changers and Actuators UL 758 Standard for Appliance Wiring Material UL Subject 762 Power Roof Ventilators for Restaurant Exhaust Appliances Outline of

Investigation UL 763 Standard for Motor-Operated Commercial Food Preparing Machines UL 768 Standard for Combination Locks

Page 12: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL 771 Standard for Night Depositories UL 773 Standard for Plug-In, Locking Type Photocontrols for Use with Area Lighting UL 773A Standard for Nonindustrial Photoelectric Switches for Lighting Control UL 775 Standard for Safety for Graphic Arts Equipment UL 778 Standard for Motor-Operated Water Pumps UL 779 Standard for Electrically Conductive Floorings UL 781 Standard for Portable Electric Lighting Units for Use in Hazardous (Classified)

Locations UL 783 Standard for Electric Flashlights and Lanterns for Use in Hazardous

(Classified) Locations UL 786 Standard for Key-Locked Safes (Class KL) UL 789 Standard for Indicator Posts for Fire-Protection Service UL 790 Standard for Standard Test Methods for Fire Tests of Roof Coverings UL 791 Standard for Residential Incinerators UL 793 Standard for Automatically Operated Roof Vents for Smoke and Heat UL 795 Standard for Commercial-Industrial Gas Heating Equipment UL 796 Standard for Printed-Wiring Boards UL 796F Standard for Flexible Materials Interconnect Constructions UL 797 Electrical Metallic Tubing - Steel UL 797A Standard for Electrical Metallic Tubing - Aluminum UL 810 Standard for Capacitors UL 810A Standard for Electrochemical Capacitors UL 813 Standard for Commercial Audio Equipment UL 814 Gas-Tube-Sign Cable UL 817 Standard for Cord Sets and Power-Supply Cords UL 823 Standard for Electric Heaters For Use in Hazardous (Classified) Locations UL 826 Standard for Household Electric Clocks UL 827 Standard for Central-Station Alarm Services UL 834 Standard for Heating, Water Supply, and Power Boilers - Electric UL 840 Standard for Insulation Coordination Including Clearances and Creepage

Distances for Electrical Equipment UL 842 Standard for Valves for Flammable Fluids UL 844 Standard for Luminaires for Use in Hazardous (Classified) Locations UL 845 Motor Control Centers UL 852 Standard for Metallic Sprinkler Pipe for Fire Protection Service UL 854 Standard for Service-Entrance Cables UL 857 Busways UL 858 Standard for Household Electric Ranges UL 858A Standard for Safety-Related Solid-State Controls for Household Electric

Ranges UL 859 Standard for Household Electric Personal Grooming Appliances UL 860 Pipe Unions for Flammable and Combustible Fluids and Fire-Protection

Service UL 863 Standard for Time-Indicating and -Recording Appliances UL 864 Standard for Control Units and Accessories for Fire Alarm Systems UL 867 Standard for Electrostatic Air Cleaners UL 869A Reference Standard for Service Equipment UL 870 Standard for Wireways, Auxiliary Gutters, and Associated Fittings UL 873 Standard for Temperature-Indicating and -Regulating Equipment UL 875 Standard for Electric Dry-Bath Heaters UL 877 Standard for Circuit Breakers and Circuit-Breaker Enclosures for Use in

Hazardous (Classified) Locations UL 879 Standard for Electric Sign Components UL Subject 879a LED Kits Outline of Investigation

Page 13: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL 884 Standard for Underfloor Raceways and Fittings UL 886 Standard for Outlet Boxes and Fittings for Use In Hazardous (Classified)

Locations UL 887 Standard for Delayed-Action Timelocks UL 891 Switchboards UL 894 Standard for Switches For Use In Hazardous (Classified) Locations UL 896 Standard for Oil-Burning Stoves UL 900 Standard for Air Filter Units UL Subject 906 Solenoids Outline of Investigation UL 907 Standard for Fireplace Accessories UL 912 Standard for Highway Emergency Signals UL 913 Standard for Intrinsically Safe Apparatus and Associated Apparatus for Use in

Class I, II, III, Division 1, Hazardous (Classified) Locations UL 916 Standard for Energy Management Equipment UL 917 Standard for Clock-Operated Switches UL 921 Commercial Dishwashers UL 923 Standard for Microwave Cooking Appliances UL 924 Standard for Emergency Lighting and Power Equipment UL 935 Standard for Fluorescent-Lamp Ballasts UL 943 Ground-Fault Circuit-Interrupters UL 943A Practical Application Guidelines For Leakage Current Protection Devices UL 943B Standard for Safety for Appliance Leakage-Current Interrupters UL Subject 943C Special Purpose Ground-Fault Circuit-Interrupters Outline of Investigation UL 959 Standard for Medium Heat Appliance Factory-Built Chimneys UL 961 Standard for Electric Hobby and Sports Equipment UL 962 Standard for Household and Commercial Furnishings UL 962A Standard for Furniture Power Distribution Units UL 963 Standard for Sealing, Wrapping, and Marking Equipment UL 964 Standard for Electrically Heated Bedding UL 969 Standard for Marking and Labeling Systems UL 971 Standard for Nonmetallic Underground Piping For Flammable Liquids UL 972 Standard for Burglary Resisting Glazing Material UL 977 Standard for Fused Power-Circuit Devices UL 979 Standard for Water Treatment Appliances UL 982 Standard for Motor-Operated Household Food Preparing Machines UL 983 Standard for Surveillance Camera Units UL 984 Hermetic Refrigerant Motor-Compressors UL 985 Standard for Household Fire Warning System Units UL 987 Standard for Stationary and Fixed Electric Tools UL 991 Standard for Tests for Safety-Related Controls Employing Solid-State Devices UL 998 Humidifiers UL 1002 Standard for Electrically Operated Valves For Use In Hazardous (Classified)

Locations UL 1004 Standard for Electric Motors UL 1004-1 Standard for Rotating Electrical Machines - General Requirements UL 1004-2 Standard for Impedance Protected Motors UL 1004-3 Standard for Thermally Protected Motors UL 1004-4 Standard for Electric Generators UL 1004-5 Standard for Fire Pump Motors UL 1004-6 Standard for Servo and Stepper Motors UL 1004-7 Standard for Electronically Protected Motors UL 1004-8 Standard for Inverter Duty Motors UL 1005 Standard for Electric Flatirons UL 1008 Standard for Transfer Switch Equipment

Page 14: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL Subject 1008a Transfer Switch Equipment, Over 600 Volts Outline of Investigation UL Subject 1008m Transfer Switch Equipment, Meter Mounted Outline of Investigation UL Subject 1008S Standard for Solid-State Transfer Switches UL 1010 Standard for Receptacle-Plug Combinations For Use In Hazardous

(Classified) Locations UL 1012 Standard for Power Units Other Than Class 2 UL 1017 Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines UL 1018 Standard for Electric Aquarium Equipment UL 1022 Standard for Line Isolation Monitors UL 1023 Standard for Household Burglar-Alarm System Units UL 1026 Standard for Electric Household Cooking and Food Serving Appliances UL 1028 Standard for Hair Clipping and Shaving Appliances UL 1029 Standard for High-Intensity-Discharge Lamp Ballasts UL 1030 Standard for Sheathed Heating Elements UL 1034 Standard for Burglary-Resistant Electric Locking Mechanisms UL 1037 Standard for Antitheft Alarms and Devices UL 1040 Standard for Fire Test of Insulated Wall Construction UL 1042 Standard for Electric Baseboard Heating Equipment UL 1046 Standard for Grease Filters for Exhaust Ducts UL 1047 Standard for Isolated Power Systems Equipment UL 1053 Standard for Ground-Fault Sensing and Relaying Equipment UL 1054 Standard for Special-Use Switches UL 1058 Standard for Halogenated Agent Extinguishing System Units UL 1059 Standard for Terminal Blocks UL 1062 Standard for Unit Substations UL 1063 Standard for Machine-Tool Wires and Cables UL 1066 Standard for Low-Voltage AC and DC Power Circuit Breakers Used in

Enclosures UL 1067 Standard for Electrically Conductive Equipment and Materials for Use in

Flammable Anesthetizing Locations UL 1069 Standard for Hospital Signaling and Nurse Call Equipment UL 1072 Standard for Medium-Voltage Power Cables UL 1075 Standard for Gas-Fired Cooking Appliances for Recreational Vehicles UL 1076 Standard for Proprietary Burglar Alarm Units and Systems UL 1077 Standard for Supplementary Protectors for Use in Electrical Equipment UL 1081 Standard for Swimming Pool Pumps, Filters, and Chlorinators UL 1082 Standard for Household Electric Coffee Makers and Brewing-Type Appliances UL 1083 Household Electric Skillets and Frying-Type Appliances UL 1086 Standard for Household Trash Compactors UL 1088 Standard for Temporary Lighting Strings UL 1090 Standard for Electric Snow Movers UL 1091 Standard for Butterfly Valves for Fire-Protection Service UL 1093 Standard for Halogenated Agent Fire Extinguishers UL 1097 Double Insulation Systems for Use in Electrical Equipment UL 1100 Standard for Alcohol and Kerosene Cooking Appliances for Marine Use UL 1101 Standard for Solidified Fuel Cooking Appliances for Marine Use UL 1102 Standard for Nonintegral Marine Fuel Tanks UL 1104 Standard for Marine Navigation Lights UL 1105 Standard for Marine Use Filters, Strainers, and Separators UL 1106 Standard for Marine Manually Operated Shutoff Valves for Flammable Liquids UL Subject 1107 Electric Power Switches Outline of Investigation UL 1110 Standard for Marine Combustible Gas Indicators UL 1112 Standard for Marine Electric Motors and Generators (Cranking, Outdrive Tilt,

Page 15: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

Trim Tab, Generators, Alternators) UL 1113 Standard for Electrically Operated Pumps for Nonflammable Liquids, Marine UL 1120 Standard for Marine Engine Ignition Systems and Components UL 1121 Standard for Marine Through-Hull Fittings and Sea-Valves UL 1123 Standard for Marine Buoyant Devices UL 1128 Standard for Marine Blowers UL 1129 Standard for Wet Exhaust Components for Marine Engines UL 1130 Standard for Mechanically and Electrically Operated Fuel Pumps for Marine

Use UL 1149 Standard for Low Voltage Marine Lighting Fixtures UL 1168 Standard for Recreational Boats UL 1175 Standard for Buoyant Cushions UL 1177 Standard for Buoyant Vests UL 1180 Standard for Fully Inflatable Recreational Personal Flotation Devices UL 1185 Standard for Portable Marine Fuel Tanks UL 1191 Standard for Components for Personal Flotation Devices UL 1193 Standard for Marine Filters and Strainers for Nonflammable Liquids UL 1196 Standard for Floating Waterlights UL 1197 Standard for Immersion Suits UL 1199 Standard for Recreational Boats Less Than 20 Feet in Length UL 1203 Standard for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for

Use in Hazardous (Classified) Locations UL Subject 1204 Parts Cleaners Outline of Investigation UL 1206 Standard for Electric Commercial Clothes-Washing Equipment UL 1230 Standard for Amateur Movie Lights UL 1236 Standard for Battery Chargers for Charging Engine-Starter Batteries UL 1238 Standard for Control Equipment for Use with Flammable Liquid Dispensing

Devices UL Subject 1238A Battery Operated Hose Nozzle Valve Readers Outline of Investigation UL 1240 Standard for Electric Commercial Clothes-Drying Equipment UL 1241 Standard for Junction Boxes for Swimming Pool Luminaires UL 1242 Standard for Electrical Intermediate Metal Conduit - Steel UL 1244 Standard for Electrical and Electronic Measuring and Testing Equipment UL 1247 Standard for Diesel Engines for Driving Stationary Fire Pumps UL 1248 Standard for Engine-Generator Assemblies for Use in Recreational Vehicles UL 1254 Standard for Pre-Engineered Dry Chemical Extinguishing System Units UL 1256 Standard for Fire Test of Roof Deck Constructions UL 1261 Standard for Electric Water Heaters for Pools and Tubs UL 1275 Standard for Flammable Liquid Storage Cabinets UL 1277 Standard for Electrical Power and Control Tray Cables with Optional Optical-

Fiber Members UL 1278 Standard for Movable and Wall- or Ceiling-Hung Electric Room Heaters UL 1283 Standard for Electromagnetic Interference Filters UL 1285 Standard for Pipe and Couplings, Polyvinyl Chloride (PVC), and Oriented

Polyvinyl Chloride (PVCO) for Underground Fire Service UL 1286 Standard for Office Furnishings UL 1296 Standard for Shear Resistance Tests for Ceiling Boards for Manufactured

Homes UL 1298 Standard for Roof Trusses for Manufactured Homes UL 1309 Marine Shipboard Cable UL 1310 Standard for Class 2 Power Units UL 1313 Standard for Nonmetallic Safety Cans for Petroleum Products UL 1314 Standard for Special-Purpose Metal Containers

Page 16: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL 1315 Standard for Metal Waste Paper Containers UL 1316 Glass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum

Products, Alcohols, and Alcohol-Gasoline Mixtures UL 1322 Standard for Fabricated Scaffold Planks and Stages UL 1323 Standard for Scaffold Hoists UL 1331 Standard for Station Inlets and Outlets UL 1332 Standard for Organic Coatings for Steel Enclosures for Outdoor Use Electrical

Equipment UL Subject 1336 Exit Doors Outline of Investigation UL 1340 Standard for Hoists UL 1363 Standard for Relocatable Power Taps UL Subject 1363A Special Purpose Relocatable Power Taps Outline of Investigation UL 1370 Unvented Alcohol Fuel Burning Decorative Appliances UL 1411 Standard for Transformers and Motor Transformers for Use in Audio-, Radio-,

and Television-Type Appliances UL 1412 Standard for Fusing Resistors and Temperature-Limited Resistors for Radio-

and Television- Type Appliances UL 1413 Standard for High-Voltage Components for Television-Type Appliances UL 1414 Standard for Capacitors and Suppressors for Radio- and Television-Type

Appliances UL 1416 Standard for Overcurrent and Overtemperature Protectors for Radio- and

Television- Type Appliances UL 1417 Standard for Special Fuses for Radio- and Television- Type Appliances UL 1419 Standard for Professional Video and Audio Equipment UL 1424 Standard for Cables for Power-Limited Fire-Alarm Circuits UL 1425 Standard for Cables for Non-Power-Limited Fire-Alarm Circuits UL 1426 Electrical Cables for Boats UL 1429 Standard for Pullout Switches UL 1431 Standard for Personal Hygiene and Health Care Appliances UL 1433 Standard for Control Centers for Changing Message Type Electric Signs UL 1434 Standard for Thermistor-Type Devices UL 1436 Standard for Outlet Circuit Testers and Similar Indicating Devices UL 1437 Standard for Electrical Analog Instruments - Panel Board Types UL 1439 Standard for Tests for Sharpness of Edges on Equipment UL 1441 Coated electrical sleeving UL 1445 Standard for Electric Water Bed Heaters UL 1446 Standard for Systems of Insulating Materials - General UL 1447 Standard for Electric Lawn Mowers UL 1448 Electric Hedge Trimmers UL 1449 Standard for Surge Protective Devices UL 1450 Standard for Motor-Operated Air Compressors, Vacuum Pumps, and Painting

Equipment UL 1453 Standard for Electric Booster and Commercial Storage Tank Water Heaters UL 1468 Standard for Direct Acting Pressure Reducing and Pressure Restricting

Valves UL 1469 Standard for Strength of Body and Hydraulic Pressure Loss Testing of

Backflow Special Check Valves UL 1472 Solid-State Dimming Controls UL 1474 Standard for Adjustable Drop Nipples for Sprinkler Systems UL Subject 1477 Compressed Gas Shutoff Valves Outline of Investigation UL 1478 Standard for Fire Pump Relief Valves UL 1479 Standard for Fire Tests of Through-Penetration Firestops UL 1480 Standard for Speakers for Fire Alarm, Emergency, and Commercial and

Page 17: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

Professional Use UL 1481 Standard for Power Supplies for Fire-Protective Signaling Systems UL 1482 Standard for Solid-Fuel Type Room Heaters UL 1484 Standard for Residential Gas Detectors UL 1486 Standard for Quick Opening Devices for Dry Pipe Valves for Fire Protection

Service UL 1492 Audio-Video Products and Accessories UL Subject 1493 Underground Low-Energy Circuit Cable Outline of Investigation UL 1500 Standard for Ignition-Protection Test for Marine Products UL 1517 Standard for Hybrid Personal Flotation Devices UL 1557 Standard for Safety for Electrically Isolated Semiconductor Devices UL 1558 Standard for Safety for Metal-Enclosed Low-Voltage Power Circuit Breaker

Switchgear UL 1559 Standard for Insect-Control Equipment - Electrocution Type UL 1561 Standard for Dry-Type General Purpose and Power Transformers UL 1562 Standard for Transformers, Distribution, Dry-Type - Over 600 Volts UL 1563 Standard for Electric Spas, Equipment Assemblies, and Associated

Equipment UL 1564 Standard for Industrial Battery Chargers UL 1565 Positioning Devices UL 1567 Standard for Receptacles and Switches Intended for Use with Aluminum Wire UL 1569 Standard for Metal-Clad Cables UL 1573 Standard for Stage and Studio Luminaires and Connector Strips UL 1574 Standard for Track Lighting Systems UL 1577 Standard for Safety for Optical Isolators UL 1581 Reference Standard for Electrical Wires, Cables, and Flexible Cords UL 1594 Standard for Sewing and Cutting Machines UL 1598 Luminaires UL 1598A Standard for Supplemental Requirements for Luminaires for Installation on

Marine Vessels UL 1598B Standard for Supplemental Requirements for Luminaire Reflector Kits for

Installation on Previously Installed Fluorescent Luminaires UL Subject 1598C Light-Emitting Diode (LED) Retrofit Luminaire Conversion Kits Outline of

Investigation UL 1602 Standard for Gasoline-Engine-Powered, Rigid-Cutting-Member Edgers and

Edger-Trimmers UL 1604 Standard for Electrical Equipment For Use In Class I and II, Division 2, And

Class III Hazardous (Classified) Locations UL 1610 Standard for Central-Station Burglar-Alarm Units UL 1626 Standard for Residential Sprinklers for Fire-Protection Service UL 1635 Standard for Digital Alarm Communicator System Units UL 1637 Standard for Home Health Care Signaling Equipment UL 1638 Standard for Visual Signaling Appliances - Private Mode Emergency and

General Utility Signaling UL 1640 Standard for Portable Power-Distribution Equipment UL 1641 Standard for Installation and Classification of Residential Burglar Alarm

Systems UL 1642 Standard for Lithium Batteries UL 1647 Standard for Motor-Operated Massage and Exercise Machines UL 1651 Standard for Optical Fiber Cable UL 1653 Electrical Nonmetallic Tubing UL 1655 Standard for Community-Antenna Television Cables UL 1659 Standard for Attachment Plug Blades for Use in Cord Sets and Power-Supply

Page 18: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

Cords UL 1660 Liquid-Tight Flexible Nonmetallic Conduit UL 1662 Standard for Electric Chain Saws UL 1664 Standard for Immersion-Detection Circuit-Interrupters UL 1666 Standard for Test for Flame Propagation Height of Electrical and Optical-Fiber

Cables Installed Vertically in Shafts UL 1667 Standard for Tall Institutional Carts for Use With Audio-, Video-, and

Television-Type Equipment UL 1673 Standard for Electric Space Heating Cables UL 1676 Standard for Conductive-Path and Discharge-Path Resistors for Use in Radio-

, Video-, or Television-Type Appliances UL 1678 Standard for Household, Commercial, and Professional-Use Carts and

Stands for Use with Audio/Video Equipment UL 1681 Standard for Wiring Device Configurations UL 1682 Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type UL 1684 Reinforced Thermosetting Resin Conduit (RTRC) and Fittings UL 1684A Standard for Supplemental Requirements for Extra Heavy Wall Reinforced

Thermosetting Resin Conduit (RTRC) and Fittings UL 1685 Standard for Vertical-Tray Fire-Propagation and Smoke-Release Test for

Electrical and Optical-Fiber Cables UL 1686 Standard for Pin and Sleeve Configurations UL 1690 Standard for Data-Processing Cable UL 1692 Standard for Polymeric Materials - Coil Forms UL 1693 Standard for Electric Radiant Heating Panels and Heating Panel Sets UL 1694 Standard for Tests for Flammability of Small Polymeric Component Materials UL 1696 Nonmetallic Mechanical Protection Tubing (NMPT) UL 1699 Standard for Arc-Fault Circuit-Interrupters UL Subject 1699B Photovoltaic (PV) DC Arc-Fault Circuit Protection Outline of Investigation UL 1703 Standard for Flat-Plate Photovoltaic Modules and Panels UL 1709 Standard for Rapid Rise Fire Tests of Protection Materials for Structural Steel UL 1711 Standard for Amplifiers for Fire Protective Signaling Systems UL 1713 Standard for Safety for Pressure Pipe and Couplings, Glass-Fiber Reinforced,

for Underground Fire Service UL 1715 Standard for Fire Test of Interior Finish Material UL 1726 Standard for Automatic Drain Valves for Standpipe Systems UL 1727 Standard for Commercial Electric Personal Grooming Appliances UL 1730 Standard for Smoke Detector Monitors and Accessories for Individual Living

Units of Multifamily Residences and Hotel/Motel Rooms UL 1738 Standard for Venting Systems for Gas-Burning Appliances, Categories II, III,

and IV UL 1739 Standard for Pilot-Operated Pressure-Control Valves for Fire-Protection

Service UL 1740 Standard for Robots and Robotic Equipment UL 1741 Standard for Inverters, Converters, Controllers and Interconnection System

Equipment for Use With Distributed Energy Resources UL 1746 Standard for External Corrosion Protection Systems For Steel Underground

Storage Tanks UL 1767 Standard for Early-Suppression Fast-Response Sprinklers UL 1769 Standard for Cylinder Valves UL 1773 Standard for Termination Boxes UL 1776 Standard for Safety for High-Pressure Cleaning Machines UL 1777 Standard for Chimney Liners UL 1778 Uninterruptible Power Systems UL 1784 Standard for Air Leakage Tests of Door Assemblies

Page 19: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL 1786 Direct Plug-In Nightlights UL 1795 Standard for Hydromassage Bathtubs UL Subject 1801 Power Distribution Centers for Communications Equipment Outline of

Investigation UL 1803 Standard for Factory Follow-Up on Third Party Certified Portable Fire

Extinguishers UL 1805 Standard for Laboratory Hoods and Cabinets UL 1812 Standard for Ducted Heat Recovery Ventilators UL 1815 Standard for Nonducted Heat Recovery Ventilators UL 1820 Standard for Fire Test of Pneumatic Tubing for Flame and Smoke

Characteristics UL 1821 Standard for Safety for Thermoplastic Sprinkler Pipe and Fittings for Fire

Protection Service UL Subject 1836 Proposed First Edition of the Standard for Electric Motors for Use in Class I,

Division 2, and Class II, Division 2 Hazardous (Classified) Locations Outline of Investigation

UL 1838 Standard for Low Voltage Landscape Lighting Systems UL 1839 Standard for Automotive Battery Booster Cables UL 1853 Standard for Nonreusable Plastic Containers for Flammable and Combustible

Liquids UL Subject 1861 Power-Operated Chemical Pumps Outline of Investigation UL 1863 Standard for Communications-Circuit Accessories UL 1876 Standard for Isolating Signal and Feedback Transformers for Use in

Electronic Equipment UL 1887 Standard for Fire Test of Plastic Sprinkler Pipe for Visible Flame and Smoke

Characteristics UL 1889 Standard for Commercial Filters for Cooking Oil UL 1897 Standard for Uplift Tests for Roof Covering Systems UL 1917 Standard for Solid-State Fan Speed Controls UL 1951 Standard for Electric Plumbing Accessories UL Subject 1953 Power-Operated Chemical Pumps Outline of Investigation UL 1963 Standard for Refrigerant Recovery/Recycling Equipment UL 1971 Standard for Signaling Devices for the Hearing Impaired UL 1975 Standard for Fire Tests for Foamed Plastics Used for Decorative Purposes UL 1977 Standard for Component Connectors for Use in Data, Signal, Control and

Power Applications UL 1978 Standard for Grease Ducts UL 1981 Standard for Central-Station Automation Systems UL 1989 Standard for Standby Batteries UL 1990 Standard for Nonmetallic Underground Conduit with Conductors UL 1993 Standard for Self-Ballasted Lamps and Lamp Adapters UL 1994 Standard for Luminous Egress Path Marking Systems UL 1995 Heating and Cooling Equipment UL 1996 Standard for Electric Duct Heaters UL 1998 Standard for Software in Programmable Components UL 2006 Standard for Halon 1211 Recovery/Recharge Equipment UL Subject 2007A Shatter Containment of Lamps for Use In Regulated Food Establishments

Outline of Investigation UL 2017 Standard for General-Purpose Signaling Devices and Systems UL 2021 Standard for Fixed and Location-Dedicated Electric Room Heaters UL 2024 Standard for Signaling, Optical Fiber and Communications Raceways and

Cable Routing Assemblies UL Subject 2024A Cable Routing Assemblies Outline of Investigation

Page 20: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL 2034 Standard for Single and Multiple Station Carbon Monoxide Alarms UL Subject 2039 Flexible Connector Piping for Fuels Outline of Investigation UL 2040 Folding Rollaway Tables UL 2043 Standard for Fire Test for Heat and Visible Smoke Release for Discrete

Products and Their Accessories Installed in Air-Handling Spaces UL 2044 Standard for Commercial Closed-Circuit Television Equipment UL 2054 Standard for Household and Commercial Batteries UL Subject 2055 Power Cable Assemblies Outline of Investigation UL Subject 2058 High Security Electronic Locks Outline of Investigation UL 2061 Standard for Adapters and Cylinder Connection Devices for Portable LP-Gas

Cylinder Assemblies UL 2075 Standard for Gas and Vapor Detectors and Sensors UL 2079 Standard for Tests for Fire Resistance of Building Joint Systems UL 2080 Standard for Fire Resistant Tanks for Flammable and Combustible Liquids UL 2085 Standard for Protected Aboveground Tanks for Flammable and Combustible

Liquids UL 2089 Standard for Vehicle Battery Adapters UL 2096 Standard for Commercial/Industrial Gas and/or Oil-Burning Assemblies With

Emission Reduction Equipment UL 2097 Reference Standard for Double Insulation Systems for Use in Electronic

Equipment UL 2106 Standard for Field Erected Boiler Assemblies UL 2108 Standard for Low Voltage Lighting Systems UL 2111 Standard for Overheating Protection for Motors UL 2115 Standard for Processed Solid-Fuel Firelogs UL 2127 Standard for Inert Gas Clean Agent Extinguishing System Units UL 2128 Standard for Meat and Poultry Plant Equipment UL 2129 Halocarbon Clean Agent Fire Extinguishers UL 2157 Electrical Clothes Washing Machines and Extractors UL 2158 Electric Clothes Dryers UL Subject 2158A Clothes Dryer Transition Duct Outline of Investigation UL 2161 Standard for Neon Transformers and Power Supplies UL 2166 Standard for Halocarbon Clean Agent Extinguishing System Units UL 2167 Standard for Water Mist Nozzles for Fire Protection Service UL 2182 Standard for Refrigerants UL Subject 2187 Deodorizers, Ozone Generator Type Outline of Investigation UL 2196 Standard for Tests for Fire Resistive Cables UL 2200 Standard for Stationary Engine Generator Assemblies UL 2201 Standard for Portable Engine Generator Assemblies UL 2202 Standard for Electric Vehicle (EV) Charging System Equipment UL 2205 Standard for Field Conversion/Retrofit of Alternative Refrigerants in

Household Refrigerators and Freezers UL 2208 Standard for Solvent Distillation Units UL 2218 Standard for Impact Resistance of Prepared Roof Covering Materials UL 2221 Standard for Tests of Fire Resistive Grease Duct Enclosure Assemblies UL 2225 Standard for Cables and Cable-Fittings For Use In Hazardous (Classified)

Locations UL 2227 Standard for Overfilling Prevention Devices UL 2231-1 Standard for Personnel Protection Systems for Electric Vehicle (EV) Supply

Circuits: General Requirements UL 2231-2 Standard for Personnel Protection Systems for Electric Vehicle (EV) Supply

Circuits: Particular Requirements for Protection Devices for Use in Charging Systems

UL Subject 2237 Multi-Point Interconnection Power Cable Assemblies for Industrial Machinery

Page 21: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

Outline of Investigation UL 2238 Standard for Cable Assemblies and Fittings for Industrial Control and Signal

Distribution UL 2239 Hardware for the Support of Conduit, Tubing, and Cable UL 2245 Standard for Below-Grade Vaults for Flammable Liquid Storage Tanks UL 2250 Standard for Instrumentation Tray Cable UL 2251 Standard for Plugs, Receptacles and Couplers for Electric Vehicles UL 2255 Standard for Receptacle Closures UL Subject 2258 Nonmetallic Tanks for Oil-Burner Fuels and Other Combustible Liquids

Outline of Investigation UL Subject 2262A Borohydride Fuel Cartridges With Integral Fuel Processing for Use With

Portable Fuel Cell Power Systems or Similar Equipment Outline of Investigation

UL 2267 Standard for Fuel Cell Power Systems for Installation in Industrial Electric Trucks

UL 2275 Standard for Full-Size Baby Cribs UL Subject 2276 Recreational Vehicle Cable Outline of Investigation UL Subject 2277 Flexible Motor Supply Cable and Wind Turbine Tray Cable Outline of

Investigation UL 2279 Electrical Equipment for Use in Class I, Zone 0, 1, and 2 Hazardous

(Classified) Locations UL 2305 Standard for Exhibition Display Units, Fabrication and Installation UL 2333 Standard for Infrared Thermometers UL 2335 Standard for Fire Tests of Storage Pallets UL 2344 Standard for Material Lifts UL 2351 Standard for Spray Nozzles for Fire-Protection Service UL 2353 Standard for Safety for Single- and Multi-Layer Insulated Winding Wire UL Subject 2358 Fire Tests of Pre-Lit Artificial Seasonal Use Trees and Other Seasonal

Decorative Items Outline of Investigation UL 2360 Standard for Test Methods for Determining the Combustibility Characteristics

of Plastics Used in Semi-Conductor Tool Construction UL Subject 2361 Custom-Built Kiosks Outline of Investigation UL 2368 Standard for Fire Exposure Testing of Intermediate Bulk Containers for

Flammable and Combustible Liquids UL 2388 Standard for Flexible Lighting Products UL 2390 Standard for Tests for Wind Resistant Asphalt Shingles with Sealed Tabs UL 2395 Standard for Adhesives for Use in Heating and Cooling Appliances to Secure

Thermal Insulation UL 2420 Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings UL Subject 2422 Ultraviolet Curing Equipment for Commercial Use Outline of Investigation UL 2431 Standard for Durability of Spray-Applied Fire Resistive Materials UL 2438 Standard for Outdoor Seasonal-Use Cord-Connected Wiring Devices UL 2442 Standard for Wall- and Ceiling-Mounts and Accessories UL 2443 Standard for Flexible Sprinkler Hose with Fittings for Fire Protection Service UL Subject 2452 Electric Swimming Pool and Spa Cover Operators Outline of Investigation UL 2459 Insulated Multi-Pole Splicing Wire Connectors UL Subject 2460 Nonshielded Cable Outline of Investigation UL 2515 Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings UL 2556 Wire and Cable Test Methods UL 2560 Standard for Emergency Call Systems for Assisted Living and Independent

Living Facilities UL Subject 2562 Pendant Cable Outline of Investigation

Page 22: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL Subject 2563 Heat Resistant Wire Outline of Investigation UL Subject 2571 Irrigation Feeder, Control, and Signal Cables Outline of Investigation UL 2572 Standard for Control and Communication Units for Mass Notification Systems UL 2575 Standard for Lithium Ion Battery Systems for Use in Electric Power Tool and

Motor Operated, Heating and Lighting Appliances UL Subject 2577 Suspended Ceiling Grid Low Voltage Lighting Systems Outline of

Investigation UL Subject 2579 Low-Voltage Fuses - Fuses for Photovoltaic Systems Outline of

Investigation UL 2580 Standard for Batteries for Use in Electric Vehicles UL 2586 Standard for Hose Nozzle Valves UL Subject 2591 Battery Separators Outline of Investigation UL Subject 2592 Low Voltage LED Wire Outline of Investigation UL Subject 2593 Motor Driven Turnstile Operators and Systems Outline of Investigation UL Subject 2594 Electric Vehicle Supply Equipment Outline of Investigation UL Subject 2682 Switch-Rated Plugs and Receptacles Outline of Investigation UL Subject 2726 Battery Lead Wire Outline of Investigation UL Subject 2727 Retrofit Motor Control Center Units for Use With Specified Motor Control

Center Sections Outline of Investigation UL Subject 2733 Surface Vehicle On-Board Cable Outline of Investigation UL Subject 2734 Connectors for Use with On-Board Electrical Vehicle (EV) Charging Systems

Outline of Investigation UL Subject 2735 Electric Utility Meters Outline of Investigation UL Subject 2737 Standard for Crane Insulators UL 2738 Standard for Induction Power Transmitters and Receivers for use with Low

Energy Products UL Subject 2744 Safety of Products in Smart Environments Outline of Investigation UL Subject 2745 Meter Socket Adapters for Communications Equipment Outline of

Investigation UL Subject 2748 Arcing Fault Mitigation Equipment Outline of Investigation UL Subject 2749 Seasonal Use LED Drivers and Non-Integral LED Lighting Strings Outline of

Investigation UL Subject 2752 Fabricated Stairways Outline of Investigation UL 2790 Standard for Commercial Incinerators UL Subject 3200 Performance Testing of Engine and Turbine Generators Outline of

Investigation UL Subject 3456 Electric-Battery-Powered Carts for Commercial Use Outline of Investigation UL Subject 3703 Solar Trackers Outline of Investigation UL 4248-1 Fuseholders - Part 1: General Requirements UL 4248-4 Fuseholders - Part 4: Class CC UL 4248-5 Fuseholders - Part 5: Class G UL 4248-6 Fuseholders - Part 6: Class H UL 4248-8 Fuseholders - Part 8: Class J UL 4248-9 Fuseholders - Part 9: Class K UL 4248-11 Fuseholders - Part 11: Type C (Edison Base) and Type S Plug Fuse UL 4248-12 Fuseholders - Part 12: Class R UL 4248-15 Fuseholders - Part 15: Class T UL Subject 4248-17 Fuseholders - Part 17: Class CF Outline of Investigation

Page 23: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL Subject 4248-18 Fuseholders - Part 18: Photovoltaic Outline of Investigation UL Subject 4703 Photovoltaic Wire Outline of Investigation UL 5085-1 Low Voltage Transformers - Part 1: General Requirements UL 5085-2 Low Voltage Transformers - Part 2: General Purpose Transformers UL 5085-3 Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers UL Subject 6140 Wind Turbine Generating Systems Outline of Investigation UL 6141 (First Edition of the) Standard for Large Wind Turbine Systems (Preliminary

Review Only-April 28,2011) UL Subject 6141 Wind Turbine Wind Turbine Converters and Interconnection Systems

Equipment Outline of Investigation UL 6500 Standard for Audio/Video and Musical Instrument Apparatus for Household,

Commercial, and Similar General Use UL Subject 6703 Connectors for Use in Photovoltaic Systems Outline of Investigation UL Subject 8703 Concentrator Photovoltaic Modules and Assemblies Outline of Investigation UL 8750 Standard for Light Emitting Diode (LED) Equipment for Use in Lighting

Products UL 60065 Standard for Audio, Video and Similar Electronic Apparatus - Safety

Requirements UL 60079-0 Electrical Apparatus for Explosive Gas Atmospheres - Part 0: General

Requirements UL 60079-1 Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof

enclosures “d” UL 60079-5 Electrical Apparatus for Explosive Gas Atmospheres - Part 5: Powder Filling

“q” UL 60079-6 Electrical Apparatus for Explosive Gas Atmospheres - Part 6: Oil-Immersion

'o' UL 60079-7 Explosive Atmospheres - Part 7: Equipment protection by increased safety 'e' UL 60079-11 Electrical Apparatus for Explosive Gas Atmospheres - Part 11: Equipment

Protection by Intrinsic Safety “i” UL 60079-15 Electrical Apparatus for Explosive Gas Atmospheres - Part 15: Electrical

Apparatus with Type of Protection “n” UL 60079-18 Electrical Apparatus for Explosive Gas Atmospheres - Part 18: Construction,

Test and Marking of Type of Protection Encapsulation 'm' Electrical Apparatus UL 60320-1 Standard for Appliance Couplers for Household and Similar General

Purposes - Part 1: General Requirements UL 60335-1 Standard for Safety of Household and Similar Electrical Appliances, Part 1:

General Requirements UL 60335-2-24 Safety Requirements for Household and Similar Electrical Appliances, Part 2:

Particular Requirements for Refrigerating Appliances, Ice-Cream Appliances and Ice-Makers

UL 60335-2-3 Standard for Safety of Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electric Irons

UL 60335-2-34 Standard for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Motor-Compressors

UL 60335-2-8 Standard for Safety for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Shavers, Hair Clippers, and Similar Appliances

UL 60384-14 Safety Requirements for Fixed Capacitors for Use in Electronic Equipment - Part 14: Sectional Specification: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains

UL 60601-1 Medical Electrical Equipment, Part 1: General Requirements for Safety UL 60691 Standard for Thermal-Links - Requirements and Application Guide UL 60730-1 Automatic Electrical Controls for Household and Similar Use; Part 1: General

Requirements UL 60730-1A Automatic Electrical Controls for Household and Similar Use; Part 1: General

Page 24: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

Requirements UL 60730-2-2 Standard for Automatic Electrical Controls for Household and Similar Use;

Part 2: Particular Requirements for Thermal Motor Protectors UL 60730-2-3 Standard for Automatic Electrical Controls for Household and Similar Use;

Part 2: Particular Requirements for Thermal Protectors for Ballasts for Tubular Fluorescent Lamps

UL 60730-2-4 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Thermal Motor Protectors for Motor-Compressors of Hermetic and Semi-Hermetic Type

UL 60730-2-6 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements

UL 60730-2-7 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Timers and Time Switches

UL 60730-2-8 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements

UL 60730-2-9 Standard for Automatic Electrical Controls For Household and Similar Use; Part 2: Particular Requirements For Temperature Sensing Controls

UL 60730-2-10A Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Motor Starting Relays

UL 60730-2-11A Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulators

UL 60730-2-12A Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Door Locks

UL 60730-2-13A Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Controls

UL 60730-2-14 Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electric Actuators

UL 60730-2-16A Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water Level Controls

UL 60730-2-18 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water and Air Flow Sensing Controls Including Mechanical Requirements

UL 60745-1 Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General Requirements

UL 60745-2-1 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-1: Particular Requirements for Drills and Impact Drills

UL 60745-2-2 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches

UL 60745-2-3 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-3: Particular Requirements for Grinders, Polishers and Disk-Type Sanders

UL 60745-2-4 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type

UL 60745-2-5 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-5: Particular Requirements for Circular Saws

UL 60745-2-6 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-6: Particular Requirements for Hammers

UL 60745-2-8 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-8: Particular Requirements for Shears and Nibblers

UL 60745-2-9 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-9: Particular Requirements for Tappers

UL 60745-2-11 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-11: Particular Requirements for Reciprocating Saws

UL 60745-2-12 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-12: Particular

Page 25: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

Requirements For Concrete Vibrators UL 60745-2-14 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-14: Particular

Requirements for Planers UL 60745-2-15 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-15: Particular

Requirements for Planers UL 60745-2-17 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-17: Particular

Requirements for Hedge Trimmers UL 60745-2-18 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-18: Particular

Requirements For Strapping Tools UL 60745-2-19 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-19: Particular

Requirements For Jointers UL 60745-2-20 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-20: Particular

Requirements For Band Saws UL 60745-2-21 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-21: Particular

Requirements For Drain Cleaners UL 60947-1 Low-Voltage Switchgear and Controlgear - Part 1: General rules UL 60947-4-1A Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-

starters - Electromechanical contactors and motor-starters UL 60947-5-2 Standard for Low-Voltage Switchgear and Controlgear - Part 5-2: Control

circuit devices and switching elements - Proximity switches UL 60947-7-1 Standard for Low-Voltage Switchgear And Controlgear - Part 7-1: Ancillary

equipment - Terminal blocks for copper conductors UL 60947-7-2 Standard for Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary

Equipment - Protective Conductor Terminal Blocks for Copper Conductors UL 60947-7-3 Standard for Low-Voltage Switchgear and Controlgear - Part 7-3: Ancillary

equipment - Safety Requirements for Fuse Terminal Blocks UL 60950 Safety of Information Technology Equipment UL 60950-1 Information Technology Equipment - Safety - Part 1: General Requirements UL 60950-21 Information Technology Equipment - Safety - Part 21: Remote Power Feeding UL 60950-22 Information Technology Equipment - Safety - Part 22: Equipment to be

Installed Outdoors UL 60950-23 Information Technology Equipment - Safety - Part 23: Large Data Storage

Equipment UL 60974-1 Standard for Arc Welding Equipment; Part 1: Welding Power Sources UL 61010-031 Safety Requirements for Electrical Equipment for Measurement, Control and

Laboratory Use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

UL 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements

UL 61010A-1 Electrical Equipment For Laboratory Use; Part 1: General Requirements UL 61010A-2-010 Standard for Electrical Equipment for Laboratory Use; Part 2: Particular

Requirements for Laboratory Equipment for the Heating of Materials UL 61010A-2-020 Standard for Electrical Equipment for Laboratory Use; Part 2: Particular

Requirements for Laboratory Centrifuges UL 61010A-2-041 Standard for Electrical Equipment for Laboratory Use; Part 2: Particular

Requirements for Autoclaves Using Steam for the Treatment of Medical Materials and for Laboratory Processes

UL 61010A-2-042 Standard for Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of Medical Materials, and for Laboratory Processes

UL 61010A-2-051 Standard for Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for Mixing and Stirring

UL 61010A-2-061 Standard for Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization

Page 26: Intertek Testing Services NA Inc. (ETL) Testing Lab labs... · Intertek Testing Services NA Inc. (ETL) Local: 22887 Townsend Way, Fairview, OR 97024 Certification Office: 165 Main

UL 61010B-1 Electrical Measuring and Test Equipment; Part 1: General Requirements UL 61010B-2-031 Electrical Equipment for Measurement, Control, and Laboratory Use; Part 2:

Particular Requirements for Hand-Held Probe Assemblies for Electrical Measurement and Test

UL 61010B-2-032 Standard for Electrical Equipment for Measurement, Control, and Laboratory Use; Part 2: Particular Requirements for Hand-Held Current Clamps for Electrical Measurement and Test

UL 61010C-1 Standard for Process Control Equipment UL 61058-1 Switches for Appliances - Part 1: General Requirements UL 61131-2 Standard for Programmable Controllers - Part 2: Equipment Requirements

and Tests UL 61496-1 Standard for Electro-Sensitive Protective Equipment, Part 1: General

Requirements and Tests UL 61496-2 Standard for Electro-Sensitive Protective Equipment, Part 2: Particular

Requirements for Equipment Using Active Opto-Electronic Protective Devices (AOPDs)

UL 61965 Mechanical Safety for Cathode Ray Tubes UL 62275 Cable Management Systems - Cable Ties for Electrical Installations UL 62368-1 (Proposed First Edition of the) Standard for Audio/Video, Information and

Communication Technology Equipment - Part 1: Safety Requirements (Preliminary Review Only-April 28, 2011)