INTERPLAST COMPANY LIMITED - Harwal...HOUSING: • The housing of Decovolt MCB is Injection Moulded...

HEADQUARTERS

INTERPLAST CO. LTDP.O.Box: 4679, Sharjah, UAE

Tel: +971 6 5335577, +971 6 5339090Fax: +971 6 5395775, +971 6 5336905

E-mail: [email protected]

INTERPLAST CO. LTD. (Saudi Arabia)P.O. Box 270982 Riyadh 11352

Kingdom Of Saudi Arabia, Tel: +966 14714667+966 14716773 Fax: +966 14714669

E-mail:[email protected]

INTERPLAST UK.LTD.15 High Street, Inverurie, Aberdeenshire AB51 3QA

Tel: (+44) 01467 629555Fax: (+44) 01467 672191


Web site: www.interplast.aewww.edisonelectricalproducts.com

INTERPLAST COMPANY LIMITEDMember of Group Harwal

LOW VOLTAGE ELECTRICAL COMPONENTS


MINIATURE CIRCUIT BREAKER 3

MCB ISOLATOR

ELCB / RCCB

DISTRIBUTION SYSTEM

CONTENTS PAGE

FLUORESCENT LUMINAّّIRES

10

13

17

20

1

T h e d i f f e r e n c e i s . . . . . . t o p e r c e i v e , c r e a t e & s w i f t l y d e l i v e r

I n t u i t i o n . . . I n n o v a t i o n . . . A g i l i t y . . .

The GROUP HARWAL’s primary business is based on plastic & metal products, with over 60 years of experience in different processes and technologies. Plastic Compounds, Building Materials, Pipe Line Systems, Housing Systems, Shelters, Electrical Products, Household Items, Storage Containers, Garden Sheds, Plastic Disposables, Packaging Materials, Outdoor Products, Refrigeration, Residential & Contract Furniture are just some of the products manufactured by HARWAL under our wide spread manufacturing facilities in UAE, USA & CIS countries.

With an annual conversion capacity of 200,000 metric tons of plastic and 20,000 tons of aluminium & steel, the Group has come to the forefront of their respective industries.


Interplast Co. Ltd, a member of Group Harwal was established in 1981 to manufacture PVC

compounds for the GCC market’s. GROUP HARWAL’S technological capabilities assisted

INTERPLAST in rapidly becoming a leading manufacturer of PVC compounds, marketed

under the trade name of IP-HARWAL. In 1984 INTERPLAST diversified into the extrusion of

DECODUCT Conduits and Trunkings for Electrical & Cable Management applications. This

downstream operation was further strengthened in 1987 with introduction of DECODUCT

injection moulding for PVC conduit & trunking fittings.

Over the years INTERPLAST electrical products have gained the confidence and

appreciation of its customers spread over GCC,AFRICA,ASIA and European Regions. To

satisfy the ever-increasing demand of its products, INTERPLAST expanded into new and

spacious factory premises in October 1988. In 1997 INTERPLAST launched the complete

range of EDISON wiring accessories & over the years this range is expanded into one of the

widest range of switches and sockets manufactured in UAE.

INTERPLAST is introducing DECOVOLT range of low voltage switchgears comprising of

Miniature Circuit Breakers, MCB ISOLATORS, ELCB’s, MCB Distribution System &

Fluorescent fixtures. DECOVOLT range is OEM manufactured as per international standards

IEC/EN 60947-3 & 60898, where as the quality management system is certified to

ISO9001 by ASTA U.K. DECOVOLT Products are CE marked declaring conformity to

European standards and safety regulations.

2

Electrical distribution needs are continuously evolving in residentional, commercial andIndustrial sectors. Improved operational safety, continuity of service, greater convenience and operating cost have assumed a tremendous significance. Miniature circuit breakers have been designed to continuously adapt to these changing needs.

Range6A to 40A "B" Curve0.5A to 63A "C" Curve0.5A to 63A for "DC" Application

ExecutionSingle Pole (1P)Single Pole & Neutral (1P+N)Double Pole (2P)Three Pole (3P)Three Pole & Neutral (3P+N)Four Pole (4P)

SpecificationIEC/EN 60898

Feature • Precise hammer action• 15 Plates Arc Chute for effective arc quenching• Longer electrical life• Wide range• Value for money• Low power consumption, thus cost effective & energy saving

AccessoriesAuxiliary SwitchShunt trip

• UNIFORM 10KA BREAKING CAPACITY FOR "B" AND "C" CURVE

• LOW POWER CONSUMPTION, THUS COST EFFECTIVE & ENERGY SAVING

• SUITABLE FOR DC AND FOR A WIDE FREQUENCY RANGE OF 50Hz-400Hz APPLICATION

• "FINGER SAFE" TERMINALS-IP20 DEGREE OF PROTECTION

• ARC CHUTE FOR EFFECTIVE ARC QUENCHING

• SILVER GRAPHITE CONTACTS FOR ENHANCED LIFE

MINIATURE CIRCUIT BREAKER

3

HOUSING:• The housing of Decovolt MCB is Injection Moulded from special grade PBT as per international specifications.• The housing and other moulded components are fire retardant, anti-tracking and non hygroscopic.• The Housing can withstand high temperature and is impact resistant.

CONTACTS:Contacts are made of special silver inlaid into copper strip, ensuring higher life and maximum safety against contact welding and erosion. These contacts have low contact resistance resulting into low watt loss.

CURRENT LIMITING ACTION: The high speed current limiting action ensures that the MCB operate before the full prospective fault current is allowed to develop. Under fault conditions, damage can be sustained to the installation and associated equipment due to the amount of energy that passes before the current is completely interrupted. The total energy let through depends on the value of current and the time for which it flows. The high speed current limiting action of DECOVOLT MCB ensures that the energy let through and any subsequent damage is minimized. This reduced LET THROUGH ENERGY (Class 3 as per BSEN 60898) assists greatly with both back-up and discrimination considerations.

OPERATING MECHANISM: DECOVOLT MCB have a quick make and break trip free mechanism. In the event of an over current or short circuit the MCB automatically interrupts all poles even if the MCB toggle is held in ON position, the handle always indicates the correct contact position.

MODERATE OVERLOAD CONDITION: Detection of moderate Over load conditions is achieved by the use of a Bimetal Overload Relay, which deflects in response to the current passing through it The Bimetal Relay moves against the trip bar releasing the trip mechanism.

SHORT CIRCUIT CONDITIONS: When the current flowing through the MCB reaches a predeter-mined level, the solenoid in Magnetic coil directly pulls in the plunger, which releases the trip mechanism.

PERFECT CONECTIONS: The design of termi-nals makes the wiring easier. A combination box type terminal with combination head screws on both sides with deep serrations ensures sparkles and firm connections.

Outgoing Terminal

Body

Latch

Arc-chutes Holder

Solenoid

Arc-chutes

Arc-runner

Arc-chutes Holder

Fixed Contact

Moving Contact Arm

Incoming Terminal(Dual Termination)


Internal View of MCB

4


TECHNICAL INFORMATION

STANDARD CONFORMITY IEC 60898:2002 IEC 60947-3:2001TYPE/SERIES CB B

Nos of Poles (Execution)RATED SHORT CIRCUITBREAKING CAPACITY Ka

1P,1P+N,2P,3P,3P+N,4P1P,1P+N,2P,3P,3P+N,4P 1P,1P+N,2P,3P,3P+N,4P

UTILIZATION CATEGORY

(3-5) InMAGNETIC RELEASESETTING (3-5) In (3-5) In

660RATED INSULATIONVOLTAGE(Ui) 660 660

4RATED IMPULSEVOLTAGE (Uimp)ELECTRICAL / MECHANICALENDURANCE

4 4

RATED FREQUENCY (f) 5050 50

1010 10

RATED VOLTAGE (AC) (Ue) 240/415240/415 240/415RATED CURRENT (In) 6-40*6-40* 6-40*

LESS THAN 32 Amps 2000020000 20000MORE THAN 32 Amps 1000010000 10000AMBIENT TEMPERATURE - 5 to + 55- 5 to + 55 - 5 to + 55

VIBERATION g 33 3SHOCK 40MM FREE FALL40MM FREE FALL 40MM FREE FALLPROTECTION CLASS IP 20IP 20 IP 20INSTALLATION POSITION VERTICAL/ HORIZONTALVERTICAL/ HORIZONTAL VERTICAL/ HORIZONTALMOUNTING CLIP ON DIN RAILCLIP ON DIN RAIL CLIP ON DIN RAILCASE & COVER MOULDED, FLAME RETARDANT THERMOPLASTIC MATERIAL

TERMINAL CAPACITY(MAX) sq.mm 2525 25

MCB ISOLATORTITLE

1P SINGLE POLE1P+N SINGLE POLE NEUTRAL2P DOUBLE POLE3P THREE POLE3P+N THREE POLE NEUTRAL4P FOUR POLE

*** CURRENT RATINGS - 0.5, 1,2,3,4,5,6,8,10,16,20,25,32,40,50,63"B" CURVE MCB's ARE AVAILABLE ON REQUEST

5


SELECTION

SELECTION OF MCB FOR MOTOR PROTECTION

S.NO KW HP

3017 51- 51 63125-38- 38 63125-32- 32 50125-27- 27 4063100-21- 21 325050-

14.4125 14.4 2540404711.280 11.2 163225268.280 8.2 102020246.363 6.3 101616204.450 - --1017.53.532 - --1011.82.625 - --68.7220 - --36.2

1.816 - --34.81.210 - --23.51.210 - --23.20.910 - --22.8

C DCC

221618.515151410137.5125.5113.7510

392.281.571.16

1.011.472.012.954.025.037.3710.0513.420.1124.829.4940.21

0.7550.740.5540.50.3730.340.2520.240.181

FULL LOADCURRENT

FULL LOADCURRENT

3 PHASE 400V ASSISTEDSTARTING STAR DELTA

"B" SERIES"B" SERIES


"C" SERIES"C" SERIES

TYPE OFMCB

LampWatt

No oflamps

Rating(A)

20W 812

11.5

40W 21012

0.52

2.5

100W 124

11.52.5

60W 148

12

0.51.534

80W 1258

12

0.51245

CURRENTRATING OF MCB

CAPACITY/WATT(Load)(240V-1pH)APPLIANCES

Fresh hold application


"B" SERIES"B" SERIES"B" SERIES"B" SERIES

"B" SERIES"B" SERIES"B" SERIES"B" SERIES"C" SERIES

"C" SERIES

WASHING MACHINEWASHING MACHINEWITH HEATER

"C" SERIES"C" SERIES"C" SERIES

8A10A

32A10A

3A4A

6A8A

6A10A16A32A

6A10A6A10A2A

8A

10A16A20A

1200W1500W

4500 W1750 W

165 litres350 litres

750W1250W

1000W2000W3000W6000W

AUTO TOASTER ( 2 SLICES)ELECTRIC KETTLE

" B " series MCB is used forlighting applications

ELECTRIC IRON

WATER HEATERSTORAGE / INSTANT

750W2000W1000W2000W300W

1300W

1.0 tonnes1.5 tonnes2.0 tonnes

OVEN/GRILLER

REFRIGATOR

OVEN/GRILLERHOT PLATE ONLYROOM HEATER

AIR CONDITIONER

MCBSELECTION

MCBSELECTION

1 PHASE 230V DOLSTARTING

FULL LOADCURRENT

MCBSELECTION

3 PHASE 400V DOLSTARTING

NOTE: One lighting circuit can have up to 800W or up to 10 lighting pointsOne power circuit can have up to 2000W or 1 power point

6

1000050003600

1000

100

10

11.131.45 2 2.55 3 5 10 14 20 28 50

1

0.1

0.01

Tim

e in

Sec

onds

Multiple of Rated Current

Limit Specified in IEC-60898-1-2002In : Rated Current B Type - 0.5A to 100A C Type - 0.5A to 100A

Reference Calibration Temp-30˚C

Lower Limit as per Standard

In > 32A

In < 32A

B-Type C-Type

Upper Limit as per Standard

1000050003600

1000

100

10

11.131.45 2 2.55 3 5 10 14 20 28 50

1

0.1

0.01

Tim

e in

Sec

onds

Multiple of Rated Current

Limit Specified inIEC-60898-1-2002In : Rated CurrentB Type - 0.5A to 100AC Type - 0.5A to 100A

Reference Calibration Temp-30˚C

Lower Limit as per Standard

In > 32A

In < 32A

B-Type

C-Type

Upper Limit as per Standard

60

CurrentLimiting

MCB

Zero pointExtinguishingMCB

Un = Mains VoltageID = Let - through short circuit current

UB = Arc VoltageIp = Prospective short circuit current

U/V

U/V

U/V

50

40

30

20

10

0.7 0.6 0.9 1.0 1.1 1.2 1.3 1.4

-10

0

Correction FactorReference Calibration Temp. 30˚C

Am

bien

t Tem

p.˚C

Temperature Compensation GraphDecovolt MCB Vs Zero Point

Extinguishing MCB

Tripping Characterstics CurveDC MCB Type B & C

Tripping Characterstics CurveType B & C

TRIPPING CHARACTERSTICS CURVES


7

CURRENT RATING (A)0.5123456

1016202532405063


1016202532405063


1016202532405063

"B CURVE" CAT NODVBDP105

DVBDP1001DVBDP1002DVBDP1003DVBDP1004DVBDP1005DVBDP1006DVBDP1010DVBDP1016DVBDP1020DVBDP1025DVBDP1032DVBDP1040DVBDP1050DVBDP1063

"C" CURVE CAT NODVCDP105

DVCDP1001DVCDP1002DVCDP1003DVCDP1004DVCDP1005DVCDP1006DVCDP1010DVCDP1016DVCDP1020DVCDP1025DVCDP1032DVCDP1040DVCDP1050DVCDP1063

"C" CURVE CAT NODVASP105

DVASP1001DVASP1002DVASP1003DVASP1004DVASP1005DVASP1006DVASP1010DVASP1016DVASP1020DVASP1025DVASP1032DVASP1040DVASP1050DVASP1063

"B CURVE" CAT NODVBSP105

DVBSP1001DVBSP1002DVBSP1003DVBSP1004DVBSP1005DVBSP1006DVBSP1010DVBSP1016DVBSP1020DVBSP1025DVBSP1032DVBSP1040DVBSP1050DVBSP1063

"C" CURVE CAT NODVCSP105

DVCSP1001DVCSP1002DVCSP1003DVCSP1004DVCSP1005DVCSP1006DVCSP1010DVCSP1016DVCSP1020DVCSP1025DVCSP1032DVCSP1040DVCSP1050DVCSP1063

SINGLE POLE

SINGLE POLE - N

DOUBLE POLE


8


1016202532405063


1016202532405063


1016202532405063

"B CURVE" CAT NODVBFP105

DVBFP1001DVBFP1002DVBFP1003DVBFP1004DVBFP1005DVBFP1006DVBFP1010DVBFP1016DVBFP1020DVBFP1025DVBFP1032DVBFP1040DVBFP1050DVBFP1063

"C" CURVE CAT NODVCFP105

DVCFP1001DVCFP1002DVCFP1003DVCFP1004DVCFP1005DVCFP1006DVCFP1010DVCFP1016DVCFP1020DVCFP1025DVCFP1032DVCFP1040DVCFP1050DVCFP1063

"C" CURVE CAT NODVATP105

DVATP1001DVATP1002DVATP1003DVATP1004DVATP1005DVATP1006DVATP1010DVATP1016DVATP1020DVATP1025DVATP1032DVATP1040DVATP1050DVATP1063

"B CURVE" CAT NODVBTP105

DVBTP1001DVBTP1002DVBTP1003DVBTP1004DVBTP1005DVBTP1006DVBTP1010DVBTP1016DVBTP1020DVBTP1025DVBTP1032DVBTP1040DVBTP1050DVBTP1063

"C" CURVE CAT NODVCTP105

DVCTP1001DVCTP1002DVCTP1003DVCTP1004DVCTP1005DVCTP1006DVCTP1010DVCTP1016DVCTP1020DVCTP1025DVCTP1032DVCTP1040DVCTP1050DVCTP1063

THREEE POLE

THREEE POLE - N

DOUBLE POLE


9

They are switch disconnectors with independentmanual operation, capable of making, carryingand breaking currents under normal circuit conditions , which may include operating overloadcondition and also carry currents under specified abnormal circuit conditions such as those of short circuit for a specified time.

Range

40A, 63A , 80A , 100A

ExecutionSingle Pole (1P)Double Pole (2P)Three Pole (3P)Four Pole (4P)

SpecificationIEC 60947-3

Feature • low watt loss• longer electrical life• Wide Range• Value for Money• Low power consumption• Cost effective and energy saving

• CONFORMING TO IEC - 60947 - 3


• LOW WATT LOSS

• COST AND ENERGY SAVING

DECOVOLT ISOLATOR

10

CURRENT RATING (A)25406380

100


100


100

CAT NODVISODP25DVISODP40DVISODP63DVISODP80

DVISODP100


DVISODP100


DVISODP100

DOUBLE POLE

THREE POLE

FOUR POLE

DECOVOLT ISOLATOR

11

BC

D

EA

35.0

70.5

64.0

DECOVOLT ISOLATOR

TECHNICAL INFORMATIONSTANDARD CONFORMITY IEC 60947-3:2001TYPE/SERIES B

Nos of Poles (Execution) 1P,1P+N,2P,3P,3P+N,4PRATED SHORT CIRCUIT BREAKING CAPACITY Ka 10UTILIZATION CATEGORYMAGNETIC RELEASE SETTING (3-5) InRATED INSULATION VOLTAGE(Ui) 660RATED IMPULSE VOLTAGE (Uimp) 4ELECTRICAL / MECHANICAL ENDURANCE 10000AMBIENT TEMPERATURE - 5 to + 55TERMINAL CAPACITY (MAX) sq.mm 25VIBERATION g 5SHOCK 40mm FREE FALLPROTECTION CLASS IP 20INSTALLATION POSITION VERTICAL/ HORIZONTALMOUNTING CLIP ON DIN RAILCASE & COVER MOULDED REINFORCED PLASTIC

RATED FREQUENCY (f) 50RATED VOLTAGE (AC) (Ue) 240/415RATED CURRENT (In) 6-40*

A CBDP

3617.5

A70

72.770

SP SPN FP

71.5

TP TPN80

53.510626.6

ED

60 454460 454460 4544

MCB'SISOLATORSAUXILIARY CONTACT

12

The flow of current through electrical facilitiesalways involves risks. Poorly insulated equipment,faulty wires and incorrect use of an electrical device cause currents to flow through the wrongpath (i.e through the insulation) to the earth.This current is called "leakage current".

Earth leakage is an electrical hazard and is responsible for electrical shocks and fire risks. Earth leakage and its associated hazard can be prevented by residual current circuit breaker (RCCB), also popularly known as ELCB

Range

25A-63A

Sensitivity

30mA , 100mA, 300mA

ExecutionDouble Pole (2P)Four Pole (4P)

SpecificationIEC 61008-1 / EN 61008-1

Feature • Simple and Robust operating mechanism• Rotary handle with ON/OFF Indication• Dual termination for Bus Bar as well as cable Connection• Advance neutral• Test Button for regular Inspection• Positive contact indication

• IEC 61008-1 / EN 61008-1


• TEST BUTTON FOR REGULAR INSPECTION

• COST EFFECTIVE AND ENERGY SAVING

DECOVOLT RCCB

13

CURRENT RATING (A)252525323232404040636363

CURRENT RATING (A)252525323232404040636363

SENSITIVITY (mA)30

10030030

10030030

10030030

100300

CAT NODVELFP25030

DVELFP250100DVELFP250300DVELFP32030



DVELFP630100DVELFP630300

SENSITIVITY (mA)30

10030030

10030030

10030030

100300

CAT NODVELDP25030

DVELDP250100DVELDP250300DVELDP32030



DVELDP630100DVELDP630300

DOUBLE POLE

FOUR POLE

DECOVOLT RCCB

14

AGAINST ELECTROCUTIONThe used of exposed, substandard, badly wired, wrongly connected or damaged equipment as well as frayed or badly repaired cables reduces the safety of an installation and increases the risk of person receiving an electric shock.

Electrocution is a passage of current through human body, which is dangerous. The flow of current through human body effects vital functions.

• BREATHING• HEARTBEATA correctly chosen RCCB can detect small currents flowing to earth and reduces the risk of electrocution. However electro-cution should not be viewed in terms of “contact voltage”. A person gets electrocuted by coming in contact with an object that has a different potential from his/her own. The difference in potential causes the current to flow through the body.

AGAINST INDIRECT CURRENTOver current protection devices like MCB are unable to act promptly on small earth leakage currents. To comply with wiring regulations, the earth fault loop impedance in Ohms, multiplied by the rated tripping current of the RCD in amperes must not exceed 50.

Example For and RCD with a rated tripping current of 30mA, the maximum permission earth fault loop impedance is calcu-lated as follows. Zs (max) = 50 /In = 50/0.03 = 1.666

DECOVOLT RCCB

PROTECTION

TECHNICAL INFORMATION

IEC 61008-125,32,40,63

30 - 100 - 300415660506

500A OR 10 Inwhichever is greater

-25 TO + 5540 MM FREE FALL

310000

DIN RAIL (35 X 7.5)MMIP 20

25

STANDARD CONFORMITYRATED CURRENT (In)SENSITIVITYRATED VOLTAGERATED INSULATION VOLTAGE(Ui)RATED FREQUENCY HzSHORT CIRCUIT WITHSTAND CAPACITY (kA)RESIDUAL MAKINGBREAKING CAPACITY AAMBIENT TEMPERATURESHOCK RESISTANCEVIBERATION RESISTANCE gELECTRICAL/MECHANICAL OPERATIONSMOUNTINGDEGREE OF PROTECTIONTERMINAL CAPACITY (MAX) sq.mm

IEC 61008-125,32,40,63

30 - 100 - 300240660506

500A OR 10 Inwhichever is greater

-25 TO + 5540 MM FREE FALL

310000

DIN RAIL (35 X 7.5)MMIP 20

25

IEC 60947-3:2001

5000166650166

Maximum permissible earth fault loop impedance in10mA30mA100mA300mA

Rated Tripping Current of the RCD

TWO POLE

15

Tripping Characteristics (IEC/EN 61008)Tripping characteristics, tripping time range an d selectivity of istantaneous, surge current-proof residual current circuit breaker.

Series connection of main RCCB and circuit RCCB's recommended by the installation rules set forth in ÖVE/ÖNORME 8001-1, is compulsory for agricultural installations according to §56 of ÖVE-EN1, Part 4.The device is ok if the result of measurement is within the time range specified by the manufacturer of the measuringinstrument.

Short description of the most important RCCB types:

Residual Current Circuit Breaker - General Data

Symbol Description

Standard. Suitable for outdoor installation (distribution boxes for outdoor installation andbuilding sites) up to -25ºC.

Conditionally surge-current proof (>250 A, 8/20 µs) for general application.

Press service key when putting the device into operation, and subsequently approximatelyonce per year. Pressing the key once per month is not required any more and can be omitted unless shorter testing intervals are required under any applicable regulations(e.g. on building sites).

Connection Diagrams

2-Pole 4-Pole

I n3 = 30 mA

I n2........I n1........ 2I n1........ 5I n1........

2I n2........ 5I n2........

conditionallysurge current-proof

Residual tripping current

Trip

ping

time

t

1000(ms)500

300

100

40

10

110 15 30

I n

10

40

10

40

10

150

300

10

50 100 150 200 500 1000 (mA) 500 A)

Tripping time range limit values

Tripping time range non-delayed

Area of unwanted tripping

DECOVOLT RCCB

16

Electrical energy has brought along with it a lot of conveniences, beyond imagination. It's consump-tion has increased manifold be it in domestic, commercial or industrial applications, there by creat-ing a need for scientific & effective method of distribution.

The purpose of electrical wiring is to systematically distribute current. In the process the system adopts methods to product hazards such as short circuit, over load and earth leakage

The electrical wiring is carried out to distribute current from a single source of supply to various circuits, such an arrangement is made inside an enclosure called Distribution board

The distribution board is not merely an enclosure but a comprehensive system in itself, comprising of copper busbars, brass neutral links, earth links to facilitate effective distribution of current, It incorpo-rates safety devices such as MCB's, ELCB's and Isolators, which serves to protect the installation.

A wide range of compact, elegant & economical DB's with unique features, designed & engineered to provide user safety, convenience and operational/ maintenance advantages are offered

Range

• Single Phase• Three Phase• Single Door• Double Door

• AESTHETICALLY SUPERIOR DB's TO SUIT THE STYLE OFF YOUR HOME DÉCOR

• CHOICE OF MULTIPLE INCOMER MCB, ISOLATOR, MCB+RCCB, CHANGEOVER + RCCB, ISOLATOR + RCCB +TPN RCBO

• READY TO USE DB'S THAT ARE SUPPLIED WITH NEUTRAL LINKS, EARTH LINKS, BUS BAR AND INTERNAL CONNECTING WIRES

• BUS BAR RATING - 100/200A

• COMPLETE RANGE OF DB'S WITH DETACHABLE GLAND PLATES AT THE TOP AND BOTTOM WITH KNOCKOUTS ON THE SIDES OF DB TO INCREASE THE FLEXIBILITY OF CABLES / CONDUIT ENTRY FROM ALL DIRECTIONS

DECOVOLT DISTRIBUTION BOARD

17

MCB DISTRIBUTION BOARDDecovolt distribution system in sheet steel enclosures is fabricated with utmost precision. Compact designs have been developed to ensure convenience and ease of installation and operation; they favorably match with the national and international technology.

CONSTRUCTIONThe enclosures are fabricated out of best quality CRCA steel sheet for better strength and finish. The distribution systems are supplied duly fitted with Din channel, neutral link earth bar and bus bar, so that the MCB’s of desired number of ratings can be fitted conveniently at site, except for one to four pole enclosures, which are only fitted with Din channel.

POWDER PAINTHigh quality powder paint coated and baked at high temperature, before powder coating the housing go through anti-rust conditioning in seven tank processes to ensure smooth and lasting finish and protection against corrosive atmosphere. All type of DB’s are available in single and two tone colour.

Decovolt elegant distribution systems are designed with the best combination of engineering technology and aesthetic to suit various applications.

All DB’s available with and without MCB’s

Single Phase and neutral sheet steel powder coated double door distribution system fitted with two cover one screwed cover for incoming and outgoing for MCB and second for protection of MCB’s, fitted with bus bar, neutral link , earth bar, and din rail, Suitable for use on 240/415Vv, 50 Hz supply.

WAYS4681216

CAT NODVDD04DVDD06DVDD08DVDD012DVDD016

TO ACCOMMODATE4 Nos. SP MCB6 Nos. SP MCB8 Nos. SP MCB12 Nos. SP MCB16 Nos. SP MCB

DOUBLE DOOR SP & N DISTRIBUTION

NO OF WAYS AND DIMENSION DETAILS

WAYS4681216

A170205240310380

B240240240240240

C8686868686

D140175210280350

E210210210210210

F90125160230300

G160160160160160A

B EG

C

DF


18

CONSUMER UNIT WITH POLYCARBONATE COVER

Single phase and neutral sheet steel powder coated distribution system with poly carbonate transparent cover for protection of MCB’s fitted with 40/63A DP Isolator or ELCB as incomer and fitted with bus bar, neutral link, earth bar and din rail. Suitable for use on 240/415V, 50 Hz.

WAYS4681216

CAT NODVCUDD04DVCUDD06DVCUDD08DVCUDD012DVCUDD016

TO ACCOMMODATE4 Nos. SP MCB6 Nos. SP MCB8 Nos. SP MCB12 Nos. SP MCB16 Nos. SP MCB


WAYS4681216

A224259294329364

B224224224224224

C6363636363

D210245280315350

E210210210210210

F160195230265300

G160160160160160

VERTICAL DOUBLE DOOR TP & N DISTRIBUTION SYSTEM FITTED WITH FP ISOLATOR

Three phase and neutral sheet steel powder coated distribution system for single/multi phase out going fitted with colour coated bus bar , neutral link, Earth bar, and din rail. Suitable for use on 240/415v, 50 Hz supply. DB is provided with detachable gland plates

WAYS6812

CAT NODVCUDD06DVCUDD08DVCUDD012

TO ACCOMMODATE6 Nos. SP MCB8 Nos. SP MCB12 Nos. SP MCB


WAYS6812

A170205240

B240240240

C868686

D140175210

E210210210

F90125160

G160160160

Three phase and neutral sheet steel powder coated distribution system for single/multi phase out going fitted with colour coated bus bar , neutral link, Earth bar, and din rail. Suitable for use on 240/415v, 50 Hz supply. DB is provided with detachable gland plates


A

B EG

C

DF

A

B EG

C

DF


19

DECOVOLT RECESSED AND SURFACE MOUNTED LUMINARIES ARE SUITABLE FOR GENERAL LIGHT-ING, APPLICATIONS IN INDOOR AREAS SUCH AS OFFICES, COMPUTER ROOMS, SCHOOLS, HOSPI-TALS AND COMMERCIAL AREAS SUCH AS SHOPS DECOVOLT WEATHER PROOF LUMINARIES ARE SUITABLE FOR DAMP/DUSTY ENVIRONMENTS SUCH AS INDUSTRIAL PREMISES, FACTORIES, POWER PLANTS, POWER DISTRIBUTION STATIONS, WAREHOUSES CAR PARKS. MATERIAL FINISH CHASSIS OF RECESSED AND SURFACE MOUNTED FIXTURES ARE MADE OF CRCA SHEET STEEL, CHEMICALLY CLEANED, TREATED PHOSPHATED & POWDER COATED WITH RAL 9010 ON BOTH SIDES, TO GIVE HIGH REFLEC-TIVE SURFACE FINISH DECOVOLT WETHER PROOF HOUSING MADE OF COMPRESSION MOULDING GLASS REINFORCED POLYESTER (GRP), DIFFUSER UV STABILIZED PMMA / POLYCARBONATE, TRAY PRETREATED WHITE POWDER COATED CRCA SHEET STEEL END CAPS ARE MOULDED POLYAMIDE 66, IT ALLOWS EASY ASSEMBLY OF LAMP HOLDERS GASKETS ARE MOULEDE POLYURETHANE RUBBER WHICH PROVIDES FOR IP-65 BALLASTS ARE ENERGY EFFICIENT WITH LOW ENERGY LOSS, NOISELESS OPERATIONS, LOW OPERATING TEMPERATURE, AND MINIMUM TEMPERATURE RISE, ELECTRONIC BALLAST OPTIONAL LAMP HOLDERS ARE WITH G5 AND G13 BASE AND BODY, MADE OF FLAME RETARDANT POLY CARBONATE PLASTIC AND PHOSPHER BRONZE CONTACT STARTER HOLDER ARE MADE OFF LAME RETAR-DANT POLYCARBONATE PLASTIC WITH PHOS-PHER BRONZE CONTACT

LOCKING CLIPS ARE MADE OF POLYCARBONATE / STAINLESS STEEL

INTERNAL WIRING WITH PVC INSULATED HEAT RESISTANT SINGLE STRAND COPPER WIRE.

• DECOVOLT FLUORESCENT BATTENS ARE SUITABLE FOR T8 AND T5 FLUORESCENT LAMPS, AVAILABLE IN SINGLE, DOUBLE AND TRIPLE TUBE VERSIONS

• DECOVOLT MODULAR RECESSED AND SURFACE FLUORESCENT LUMINARIES ARE SUITABLE FOR T5 AND T8 FLUORESCENT LAMPS AVAILABLE IN IP-20 AND IP -40 RATINGS

• DECOVOLT WEATHER PROOF LUMINARIE SUITABLE FOR SINGLE OR TWIN T5 OR T8 LAMPS OPERATED BY HF OR ELECTROMAGNETIC BALLAST, AVAILABLE IN IP-65 PROTECTION

DECOVOLT FLUORESCENT LUMINARIES

20

TECHNICAL DATA MATERIAL & FINISH

Type Lamp Rating Dimensions mmCode L W H

DV 120 1 x 18 W 618 52 72DV 220 2 x 18 W 618 100 79DV 140 1 x 36 W 1228 52 72DV 240 2 x 36 W 1228 100 79

DV T8 SeriesSURFACE MOUNTEDBATTEN LUMINAIRE

Description:

Decovolt fluorescent Batten luminarie suitable for single fluorescent T8 lamp from 18W to 36 W. The luminarie is suitable for suspended or surface mounted application.

Application:Suitable for general lighting applications in indoor areas like offices, schools, hospitals and commer-cial areas like shops etc.

Features: • Sturdy construction.• Switch start circuit.• Easy to install & maintain• Low Energy loss ballast & High ballast factor for maximum light output.• Internal wiring with heat Resistant (105°C) single strand copper wire.

Options:

• HPF capacitors• Electronic starters• High freq. Electronic ballasts• HF circuits, RFI capacitors• Other voltage and frequency.

Batten Frame: 0.4 mm thick pre-treated and Powder coated cold rolled steel sheet with 25 microns paint thickness of color RAL 9016.

Ballast: Decovolt Low energy loss, noiseless, operation, low operating temperature, minimum temperature rise. The ballast fixed with screws, nuts & serrated washer ensures positive locking and proper earthing. End Caps: Separate 2 nos. of Polycarbonate end caps are provided, which are flame retardant and self -extinguishing type. Plastic end caps improve the aesthetics of the fixtures. The fixing of lamp holders is simple - slide fit.

Lamp & Starter holders: Flame -retardant polycarbonate with phosphor bronze contacts.

Wiring: PVC insulated single strand heat resistant wire

Dimensional details:

DECOVOLT FLUORESCENT BATTEN

21

DECOVOLT FLUORESCENT LUMINAIRES

MODULAR RECESSEDDV- STD SERIES

The Louvre is made of high

purity aluminum sheets with

single parabolic shape and with

ribbed cross blades. The louver

assembly is suspended in the

chassis by anticorrosive

one springs. The luminaire

is also available with back

reflectors on request.

220V110V 230V 240V

IP20

60Hz50Hz

DEOStarter

HPFCapacitor

RFCapacitor

HFBallast

EmergencyBatteryPack

FI

OPTIONS

Modular Recessed fluorescent luminaires are suitable for T5 & T8 / T12 Fluorescent lamps. This can be operated by Electromagnetic or Electronic Ballast & can be installed in exposed /concealed T-grid applications.Application:Chassis: Made of CRCA sheet steel, chemically cleaned, treated, phosphated & powder coated with RAL 9010 on both inside & outside to give high reflective surface finish.

Ballast: Energy efficient electromagnetic ballast, with Low energy loss, noiseless operation, low operating tempera-tures & minimum temperature rise. Electronic Ballast Optional.

Lamp holders: With G5/G13 base & body made of Flame-retardant polycarbonate plastic with phosphor bronze contact.

Starter holders: Made of Flame-Retardant poly carbonate plastic with phosphor bronze contact.

Internal Wiring: With PVC insulated, heat resistant (105°C) single strand Copper wire.

22

FLUORESCENT LUMINARIESWEATHER PROOF - DV T8 SERIES 220V110V 230V 240V

IP65

60Hz50Hz

DEOStarter

HPFCapacitor

RFCapacitor

HFBallast

EmergencyBatteryPack

FI

OPTIONS

L2L1

100 168

108

DVP 118 1X18 W 665 230

DVP 136 1X36 W 1275 836

DVP 158 1X58 W 1575 1136

DVP 218 2X18 W 665 230

DVP 236 2X36 W 1275 836

DVP 258 2X58 W 1575 1136

Length in mmModel Lamps

L1 L2

Integrated Emergency Battery Packis not available in 18W version.

DECOVOLT FLUORESCENT LUMINAIRES

Weatherproof Luminaire suitable for single or twin, T5 or T8/T12 fluorescent lamps operated by HF or Electromag-netic Ballast. Application: Suitable for damp/dusty environments such as Industrial premises, factories, power plants, power distribution stations, warehouses, car parks.

Material & Finish:Housing: Compression moulded glass reinforced polyester (GRP)Diffuser: UV stabilized PMMA / Polycarbonate.Tray: Pre-treated, White powder coated CRCA Sheet steelGaskets: Moulded Polyurethane rubber which provides for IP65Locking Clips: Polycarbonate / stainless steel (Optional)Lamp & starter holders: Made of flame retardant Polycarbonate with phosphor bronze contacts.

Wiring: PVC insulated single strand copper wire that can withstand a temperature of 105˚CBallast: Low energy loss, noiseless operation, low operating temperatures, minimum temperature rise.

23

NOTES

24

NOTES

25

HEADQUARTERS

INTERPLAST CO. LTDP.O.Box: 4679, Sharjah, UAE

Tel: +971 6 5335577, +971 6 5339090Fax: +971 6 5395775, +971 6 5336905


INTERPLAST CO. LTD. (Saudi Arabia)P.O. Box 270982 Riyadh 11352

Kingdom Of Saudi Arabia, Tel: +966 14714667+966 14716773 Fax: +966 14714669

E-mail:[email protected]

INTERPLAST UK.LTD.15 High Street, Inverurie, Aberdeenshire AB51 3QA

Tel: (+44) 01467 629555Fax: (+44) 01467 672191


Web site: www.interplast.aewww.edisonelectricalproducts.com



INTERPLAST COMPANY LIMITED - Harwal...HOUSING: • The housing of Decovolt MCB is Injection Moulded...

Documents

Transcript of INTERPLAST COMPANY LIMITED - Harwal...HOUSING: • The housing of Decovolt MCB is Injection Moulded...