PowerPoint Presentation

An Interns Guide to basic WMS 2011 setup in just 8 easy stepsHow to set up MultiPoint Server 2011 Microsoft CorporationBy: Livi EricksonStep 1: Download ISO file

http://www.microsoft.com/downloads/en/details.aspx?FamilyID=3188a587-3542-4dda-99b3-551cdabe581f

Step 2: Burn ISO file to disk / flash drive

Repeat for each stationEach station:USB HubMonitorKeyboardMouseTo set up a station:Plug USB hub into host computerPlug in monitor to computerPlug in keyboard / mouse to hubStep 3: Set Up HardwareStep 4: Boot MultiPoint computerfrom disk / flash drive

Step 5: Go through software setup

Select Local SettingsAccept License Terms Choose Install LocationStep 6: Configure MultiPoint Settings

Choose options and continue with installStep 7. Install Display Drivers (if prompted)Log in as administrator (WMS will be in maintenance mode)

Search on internet for the 64-bit display driver for your graphics card(s)

Download and install

Restart in normal mode

Step 8: Map stations

Each station connected should have this screen displayedWindows MultiPoint Server Planning Guide: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=501ba465-382f-41cb-bbea-b9bf580e2bb2Windows MultiPoint Server Planning Guide:http://www.microsoft.com/downloads/en/details.aspx?FamilyID=7e762ce6-562d-449d-be0d-52c0103edf60MultiPoint Online:Home page: www.microsoft.com/multipointTwitter: @msmultipointYoutube: www.youtube.com/msmultipointFacebook: www.facebook.com/windowsmultipointserver

Ask a Question: http://social.technet.microsoft.com/Forums/en-US/windowsmultipointserver/threads

Additional Resources