HE

ATER

-A/C

PAGE 22

RED DOT UNITS

Kits Include:

R-8230 UnderdashHeater/Air Conditioner UnitNAVISTAR INTERNATIONAL S, 4000, 7000, and 8000 SERIES TRUCKS, 1983–1994

The R-8230 exceeds the performance of the original system and has styling to match the factory dash. Includes the “Max A/C” and “Defrost Interlock” features not offered from the factory. Mounts directly to the firewall and mates to existing inlet and outlet ducting.

19.4"494mm

13.9"354mm

15.3"389mm

6.1"155mm

19.7"499mm

R-8230 SPECIFICATIONSBTUs Heating – 29,700 BTU/Hr at 100°F (kw 8.70 at 37.8°C) air temperature rise Cooling – 22,400 BTU/Hr with 36°F (kw 6.56 with 2.2°C) refrigerant temperature and 80°F (26.7°C) wet bulb entering airAIR FLOW 265 CFM (450 m3/h)WEIGHT 48 lbs. (22 kg)MOTOR Permanent magnetCURRENT 19.5 amps at 13.6 VDC DRAW (includes 4 amps for A/C clutch)MODEL R-8230-0 NOTE BTU’s and air flow in installed conditions. Not for viscous fan applications.

INTERNATIONAL

R-8230 SYSTEM ORDERING GUIDE

For complete kits order one Heater-Air Conditioner Kit, Compressor, Compressor Mount Kit.Not for viscous applications.

• Heater A/C Unit • Heater Hose and Water Valve• Refrigerant Hose & Fittings• High Capacity Receiver Drier• TrinaryTM Protection Switch

• Wiring Harness• Condenser• Miscellaneous Installation Hardware

and Brackets

Heater A/C Compressor Kit Vehicle Engine Steering Brakes Compressor Mount KitR-8230-0P Series 4600 Through 8100 V/8 International Standard/Power 75R8612 (134A) 75R9530 for Vehicles “S” Series 1600 Through 2600 6.9 Liter, & 7.3 Liter 1983–1994 6 Cylinder IHC DT466, Standard/Power Air 75R8612 (134A) 75R9980 DTA466, DT360 or DTA360 6 Cylinder IHC DT466, Standard/Power Hydraulic 75R8612 (134A) 75R9980 DTA466

6 Cylinder IHC DT360, Standard/Power Hydraulic 75R8612 (134A) 75R9980 DTA 360

Cummins 6 Cyl L-10 Power Air 75R8612 (134A) 75R9540 “S” Series

1994-1997 DT408/DT466 75R8612 (134A) 75R9985 (will not work on DT466E)

HEATER-A/C

PAGE 23

RED DOT UNITS

Heater A/C Compressor Kit Engine Steering Brakes Compressor Mount Kit No.R-8235-0P Series 4600 through 8100 V8 International Standard/Power 75R8612 (134A) 75R9530 or Vehicles “S” Series 1600 through 2600 6.9 Liter, & 7.3 Liter 1995 to 2002 6 Cylinder IHC DT466, Standard/Power Air 75R8612 (134A) 75R9980 DTA466, DT360 or DTA360 6 Cylinder IHC DT466, Standard/Power Hydraulic 75R8612 (134A) 75R9980 DTA466

6 Cylinder IHC DT360, Standard/Power Hydraulic 75R8612 (134A) 75R9980 DTA 360

Cummins 6 Cylinder L-10 Power Air 75R8612 (134A) 75R9540 “S” Series

1995-1997 DT408/DT466 75R8612 (134A) 75R9985 (will not work on DT466E)

R-8235 UnderdashDrop-In Evaporator KitNAVISTAR INTERNATIONAL S, 4000, 7000, and 8000 SERIES TRUCKS, 1995–2002

The R-8235 drop-in evaporator kit integrates with the OEM housing and blower motor assembly and meets all factory specifications. R-134a compatible.

R-8235 SYSTEM ORDERING GUIDE

NOTE A: Tecumseh Compressors require 75R1202 Clutch and one each (Service Valves and Charge Ports): • R12: 75R5618 and 75R5611 or • R134A: 75R5688 and 75R5681

Kits Include:

For complete kits order one Heater-Air Conditioner Kit, Compressor, Compressor Mount Kit.Not for viscous applications.

• Heater A/C Unit • Heater Hose and Water Valve• Refrigerant Hose & Fittings• High Capacity Receiver Drier• TrinaryTM Protection Switch

• Wiring Harness• Condenser• Miscellaneous Installation Hardware

and Brackets

INTERNATIONAL

HE

ATER

-A/C

PAGE 24

RED DOT UNITS

R-8500 BackwallAir Conditioner with Heat OptionCONSTRUCTION • MINING • AGRICULTURE

17.5"445mm

5.6"143mm

14.5"367mm

12 VO

LT

Just 5.6 inches deep, the R-8500 packs high performance and reliability into a slim profile. The air plenum can be changed to divert air out the top or the front of the unit depending the application. In addition, the controls can be remote-mounted. Models include A/C only or heater and A/C combination.

OFF-ROAD

Shown with remote mount controls.

R-8500 SPECIFICATIONSBTUs Heating – 22,000 BTU/Hr @ 100°F (6.4 kW @ 37.8°C) air temperature rise Cooling – 15,200 BTU/Hr with 36°F (w 4.5 kW w/ 2.2°C) refrigerant temperature and 80°F (26.7°C) wet bulb entering airAIR FLOW 205 CFM (348 m3/h) WEIGHT 24 lbs. (11 kg)MOTOR Three-speed field woundCURRENT 13.5 amps @ 13.6 VDC (includes 4 amps for A/C clutch) DRAW 6.75 amps @ 27.2 VDC (includes 2 amps for A/C clutch)

R-8500 SYSTEM ORDERING GUIDE R-134a NOTES UNITS R-8500-2P 12 VDC – Heater - A/C R-8500-2-24P 24 VDC – Heater - A/C R-8500-3P 12 VDC – A/C Only R-8500-3-24P 24 VDC – A/C Only

CONDENSER R-9720-12P Remote Mount 12 VDC – See page 441 R-9720-12-24P Remote Mount 24 VDC – See page 441 77R0650 Radiator Mount See page 448

GENERAL PURPOSE 78R1705 Remote Mount ATCO version INSTALLATION KIT 78R1070 Rooftop condenser ATCO version 78R1077 Rooftop condenser EZ Clip version 78R1027 Front mount condenser EZ Clip version 78R1025 Front mount condenser ATCO version 78R0100 Heater Hose 5⁄8” diameter, 50’

OPTIONS Replacement Recirc Filter 78R5330M Plenum Assembly RD-3-6060-0P Universal Duct Kit 78R2100

COMPRESSOR Requires compressor and mounting kit See 75 Series Compressor section on page 329

Water Valve for Heater/AC is supplied by customer

HEATER-A/C

PAGE 25

RED DOT UNITS

R-8545 BackwallAir Conditioner with Heat Option CONSTRUCTION • MINING • AGRICULTURE

R-8545 SPECIFICATIONSBTUs Heating – 31,460 BTU/Hr @ 100°F (8.4 kW @ 37.8°C) air temperature rise Cooling – 19,800 BTU/Hr with 36°F (5.3 kW with 2.2°C) refrigerant temperature and 80°F (26.7°C) wet bulb entering air AIR FLOW 294 CFM (450 m3/h) WEIGHT Heater & A/C – 39 lbs. (18 kg) A/C Only – 34 lbs. (15 kg)MOTOR Totally sealed, 12 or 24 VDC permanent magnet type with long life brushes, and heavy duty pre-lubricated sealed ball bearingsCURRENT 16.1 amps @ 13.6 VDC (includes 4 amps for A/C clutch), DRAW 8 amps @ 27.2 VDC (includes 2 amps for A/C clutch)CONTROLS Mode selector switch (heat or A/C), three-speed fan switch, fixed setting A/C thermostat, cable controlled water valve

OFF-ROAD

Compact and powerful, the R-8545 produces the highest output of any off-road unit its size. Its performance and durability make the R-8545 the ideal choice for off-highway equipment cabs where space is a premium and reliability is essential. Engineered to filter in-cab air as well as incoming outside air when pressurization is required. Models include A/C only or heater and A/C combination.

18.2"462mm

6.8"172mm

20.4"518mm

R-8545 SYSTEM ORDERING GUIDE R-134a NOTESUNITS R-8545-17P 12 VDC – A/C Only R-8545-17-24P 24 VDC – A/C Only R-8545-16P 12 VDC – Heater-A/C R-8545-16-24P 24 VDC – Heater-A/C

CONDENSER R-9720-12P 12V, Remote Mount See page 441 R-9720-12-24P 4V, Remote Mount See page 441 77R0650 Radiator Mount See page 448

GENERAL PURPOSE 78R1705 Remote Mount ATCO version INSTALLATION KIT 78R1070 Rooftop condenser ATCO version 78R1077 Rooftop condenser EZ Clip version 78R1027 Front mount condenser EZ Clip version 78R1025 Front mount condenser ATCO version 78R0100 Heater Hose 5⁄8” diameter, 50’

OPTIONS 3” Air Outlet Adapter for Pressurization RD-3-5448-0P Remote Filters See Filters & Pressurizers section Pressurizers See Filters & Pressurizers section Universal Duct Kit 78R2100 Plenum RD-3-15122-0P

COMPRESSOR Requires compressor and mounting kit See 75 Series Compressor section on page 329

HE

ATER

-A/C

PAGE 26

RED DOT UNITS

R-8820 UnderdashHeater/Air Conditioner UnitMACK R MODEL CABS

The R-8820 heater/air conditioner has a factory-installed look and improved air control and performance over the OE system. Uses existing mounting points for installation in R, U, DM, RL/RS, and RW cabs. Note: Kits for Model LE and MR severe-service applications are available from Mack dealers.

R-8820 SPECIFICATIONSBTUs Heating – 27,000 BTU/Hr @ 100°F (kW 7.91 @ 37.8°C) air temperature rise Cooling – 20,000 BTU/Hr with 36°F (kW 5.86 with 2.2°C) refrigerant temperature and 80°F (26.7°C) wet bulb entering airAIR FLOW 250 CFM (425 m3/h) WEIGHT 34 lbs. (15 kg)MOTOR Permanent magnet, extended lifeCURRENT 14 amps @ 13.6 VDC DRAWCONTROLS Three-speed blower motor switch, temperature-level and mode-selection leverUNITS R-8820-1P (tan) R-8820-2P (grey)

MACK

32.5"826mm

14.1"358mm

12.1"303mm

13.9"363mm

10.0"254mm

1.0"26mm

8.5"216mm

17.9"455mm

MODEL LE & MR

SEVERE SERVICE APPLICATIONSComponent parts available separately from Red Dot:R-2000-11P A/C UnitR-6160-0P Condensor78R1025 Installation KitRD-5-8476-0P LE Roof BracingRD-5-8476-1P MR Roof Bracing

For compressor and compressor mount kit contact your local Mack dealer.

See ordering guide on the next page...

HEATER-A/C

PAGE 27

RED DOT UNITS

R-8820 SYSTEM ORDERING GUIDE Condenser Condenser Model Color Engine Base Kit Installation Kit Compressor With CMCAC* Without CMCAC* Mount & Drive Kit

R & U (1980-89) G E6 with two Valves R-8820-2P 78R1470 75R8382 77R0570 1 77R1300 4 75R9500 2

R & U (1980-89) G E6 with Ambac & Bosch 6000 Injector R-8820-2P 78R1470 75R8382 77R0570 1 77R1300 4 Mack Dealer

R & U (1980-89) G E6 with Bosch 7100 Injector R-8820-2P 78R1470 75R8382 77R0570 1 77R1300 4 Mack Dealer

R & U (1980-89) T E6 with two Valves R-8820-1P 78R1470 75R8382 77R0570 1 77R1300 4 75R9500 2

R & U (1980-89) T E6 with Ambac & Bosch 6000 Injector R-8820-1P 78R1470 75R8382 77R0570 1 77R1300 4 Mack Dealer

RD (1980-89) G E6 with two Valves R-8820-2P 78R1470 75R8382 77R7710 77R1300 4 75R9500

RB & RD (1980-89) G E6 with Ambac & Bosch 6000 Injector R-8820-2P 78R1470 75R8382 77R7710 77R1300 4 Mack Dealer

RB & RD (1980-89) G E6 with Bosch 7100 Injector R-8820-2P 78R1470 75R8382 77R7710 77R1300 4 Mack Dealer

RB & RD (1980-89) T E6 with two Valves R-8820-1P 78R1470 75R8382 77R7710 77R1300 4 75R9500 2

RD (1980-89) T E6 with Ambac & Bosch 6000 Injector R-8820-1P 78R1470 75R8382 77R7710 77R1300 4 Mack Dealer

RB Facelift (1990+) G E7 5 R-8820-2P 78R1470 75R8382 77R7710 N/A Mack Dealer

RD Facelift (1990 +) G E7 5 R-8820-2P 78R1470 75R8382 Mack Dealer N/A Mack Dealer

DM (1980-89) G E6 with two Valves R-8820-2P 78R1470 75R8382 Mack Dealer 77R1300 3 75R9500 2

DM (1980-89) G E6 with Ambac & Bosch 6000 Injector R-8820-2P 78R1470 75R8382 Mack Dealer 77R1300 3 Mack Dealer

DM (1980-89) G E6 with Ambac & Bosch 6000 Injector R-8820-2P 78R1470 75R8382 Mack Dealer N/A Mack Dealer

DM (1990 to 4/15/95) G E7 5 R-8820-2P 78R1470 75R8382 Mack Dealer N/A Mack Dealer

DM (4/15/95 & later) G E7 5 R-8820-2P 78R1470 75R8382 210RD425 N/A Mack Dealer

UPGRADE HEATER TO HEATER-A/CMR Conversion Kit – E6 with 4 valve (All) RD-5-8622-0P Included Included N/A Mack Dealer

MR Conversion Kit – E7 RD-5-8622-0P Included Included N/A Mack DealerColor Code: B = Black G = Gray T = Tan W= White

1 Requires proper operation of viscous fan to operate properly with R134a2 Vehicles equipped with steel timing use Mount Kit RD-5-5160-0P and adapter kit RD-5-5031-0P3 Mount Kit will not work on very late E6s. Must change water pump housing to MACK #771GB232M4 The following items need to be ordered from MACK: (1) 4103-5010332161 Front Condenser Bracket, (1) 4103-

5010332164 Rear Condenser Bracket, (1) 4103-5010332652 Receiver Drier Bracket, and (3) 4103-5000717723 Hose Support Bracket.

5 Compressor Mount Kit must be ordered separately. E7 ETEC engine may require #12QR4115 blower motor bracket and #1MR2464M pressure switch.

* CMCAC = Chassis-mounted charge air cooler

R-8820 UnderdashHeater/Air Conditioner Unit

MACK

HE

ATER

-A/C

PAGE 28

RED DOT UNITS

R-9520 FloorHeater/Air Conditioner with Reversible CoresCONSTRUCTION • MINING • AGRICULTURE

R-9520 SPECIFICATIONSBTUs Heating – 31,600 BTU/Hr @ 100°F (9.3 kW @ 37.8°C) air temperature rise, Cooling – 33,070 BTU/hr with 36°F (9.7 kW with 2.2°C) refrigerant temperature and 80°F (26.7°C) wet bulb entering airAIR FLOW 430 CFM (730 m3/h) WEIGHT 41 lbs. (19 kg)MOTOR One three-speed; vented; permanent magnetCURRENT 11.2 amps @ 27.2 VDC DRAW (includes 2 amps for A/C clutch)

R-9520 SYSTEM ORDERING GUIDE R-134a NOTESUNITS R-9520-0P 12 VDC - Heater / Air Conditioner R-9520-0-24P 24 VDC - Heater / Air Conditioner

CONDENSER 77R7100 - Radiator Mount See page 460 R-9725-3P - Remote Mount 12 VDC - See page 62 R-9725-3-24P - Remote Mount 24 VDC - See page 62

GENERAL PURPOSE 78R1705 Remote Mount ATCO version INSTALLATION KIT 78R1070 Rooftop condenser ATCO version 78R1077 Rooftop condenser EZ Clip version 78R1027 Front mount condenser EZ Clip version

COMPRESSOR Requires compressor and mounting kit See 75 Series Compressor section on page 329

17.9"453mm

13.8"350mm

13.9"353mm

10.5"260mm

Our R-9520 is a powerful floor-mounted heater/air conditioner for heavy-duty and off-highway equipment cabs. Plenum options let you duct or direct air where you need it, and a variety of remote-mounted controls are available to complete the installation. A plastic trim kit is available with the louvered plenum assembly for an integrated look.

OFF-ROAD

Control Panels (See also 71 Series, Control Panels)

R-9520-0P

71R5600 Three-speed motor switch - includes manual water valve control71R5605 Three-speed motor switch - includes electronic water valve control71R5122 Three-speed motor switch - includes A/C switch and electronic water valve71R5812 Automatic Temperature Control - 12 volt

R-9520-0-24P

71R5600 Three-speed motor switch - includes manual water valve control71R5605 Three-speed motor switch - includes electronic water valve control71R5122 Three-speed motor switch - includes A/C switch and electronic water valve71R5814 Automatic Temperature Control - 24 volt

OPTIONS:

Louvered Plenum AssemblyRD-3-10111-0P

Ductable Plenum AssemblyRD-3-10112-0P

HEATER-A/C

PAGE 29

RED DOT UNITS

R-9530 SYSTEM ORDERING GUIDE R-134a NOTESUNITS R-9530-0P 12 VDC - Air Conditioner Only R-9530-0-24P 24 VDC - Air Conditioner Only R-9530-1P 12 VDC - Heater / Air Conditioner R-9530-1-24P 24 VDC - Heater / Air Conditioner

CONDENSER 77R7100 - Radiator Mount See page 460 R-9725-3P - Remote Mount 12 VDC - See page 62 R-9725-3-24P - Remote Mount 24 VDC - See page 62

GENERAL PURPOSE 78R1705 Remote Mount ATCO version INSTALLATION KIT 78R1070 Rooftop condenser ATCO version 78R1077 Rooftop condenser EZ Clip version 78R1027 Front mount condenser EZ Clip version

COMPRESSOR Requires compressor and mounting kit See 75 Series Compressor section on page 329

R-9530 Floor Heater/Air Conditioner Unit OFF-ROAD • CONSTRUCTION • INDUSTRIAL

The R-9530 wall-mounted unit is a compact, modular blower/heat exchanger package that can accommodate a range of inlet and outlet plenums. Available as a heater-A/C combination or A/C-only.

ON-ROAD

R-9730 S P E C I F I C A T I O N SBTUs Cooling - 24,500 BTU/Hr Heating - 33,000 BTU/HrAIR FLOW 405 CFM (688 m3/h)WEIGHT R-9530-0 20 lbs. (9 kg) R-9530-1 25 lbs. (11 kg)CURRENT 19.9 amps at 13.5 VDC DRAW 10.9 amps at 27 VDC

18.18"462mm

7.37"187mm

19.78"502mm

11"280mm

R-9530

OPTIONS:

RD-3-17277-0P

Drain Pan – RD-3-18633-0PRD-3-17278-0P RD-3-17279-0P

HE

ATER

-A/C

PAGE 30

RED DOT UNITS

R-9560 HeadlinerAir Conditioner Unit with heat optionCONSTRUCTION • MINING • AGRICULTURE • INDUSTRIAL

R-9755 S P E C I F I C A T I O N SBTUs Cooling – 32,500 BTU @ 100˚F (9.5kw @ 37.8˚C) air temperature rise Heating – 38,600 BTU @ 100˚F (11.3kw @ 37.8˚C) air temperature riseAIR FLOW 485 CFM (824 m3/h)WEIGHT 64lbs (29kg)CURRENT 17.9 amps @ 13.6 VDC DRAW 9 amps @ 27.2 VDCCONTROLS Three speed

R-9560 SYSTEM ORDERING GUIDE R-134a NOTESUNITS R-9560-0P HEATER - A/C 12V R-9560-0-24P HEATER - A/C 24V R-9560-1P AIR CONDITIONER 12V R-9560-1-24P AIR CONDITIONER 24V

CONDENSER Radiator Mount See 77 Series Condensers section Remote Mount See Units Condensers section

INSTALLATION KIT 78R1705 Refrigerant hose, fitings and hardware 78R1077 Refrigerant hose, fittings and hardware EZ Clip version

OPTIONS Remote mount control panel (Heat and A/C) 71R5851 Remote mount control panle (A/C only) 71R5850

COMPRESSOR Requires compressor and mounting kit See 75 Series Compressor section on page 329

* Booster Pressurizer can only be used with Remote Mount Filters

OFF-ROAD

Instead of pulling air from the rear, the unit draws air from the bottom, which allows efficient airflow even when it’s mounted near a back wall or some other tight location

An added benefit: a hinged bottom makes the R-9560 easy to service. You just remove the front bolts and the unit swings down for easy access to filters and other components. This feature saves time—and the technician’s shoulders.

38.36"975mm

15.78"400mm

6.59"168mm

HEATER-A/C

PAGE 31

RED DOT UNITS

26.3"668mm

21.2"539mm

8.7"221mm

R-9715 HeadlinerAir Conditioner VAN • BUS • FIRE/RESCUE

The highest-capacity headliner A/C unit we make, the R-9715 is ideal for big interiors where appearance is important, including shuttle vehicles, buses, and fire trucks. An electric water pump can be used with tilt cabs or extremely humid conditions.

R-9715 SYSTEM ORDERING GUIDE R-134a NOTESUNITS R-9715-11P 12 VDC - replaces R-9715-10P R-9715-11-24P 24 VDC - replaces R-9715-10-24P

CONDENSER R-4500-8P Remote Mount 12 VDC R-4500-8-24P Remote Mount 24 VDC

INSTALLATION KIT 78R1070 Rooftop condenser ATCO version 78R1077 Rooftop condenser EZ Clip version

DUAL PUMP KIT RD-2-3825-0P

COMPRESSOR Requires compressor and mounting kit See 75 Series Compressor section on page 329

ON-ROAD

R-9715 S P E C I F I C A T I O N SBTUs Cooling – 39,500 BTU/Hr with 36°F (11.6 kW with 2.2°C) refrigerant temperature and 80°F (26.7°C) wet bulb entering airAIR FLOW 577 CFM (980 m3/h) WEIGHT 40 lbs. (18 Kg) CURRENT 26.3 amps @ 13.6 VDC DRAW (includes 4 amps for A/C clutch) 13.2 amps @ 27.2 VDC (includes 2 amps for A/C clutch)

HE

ATER

-A/C

PAGE 32

RED DOT UNITS

Low profile ceiling plenum blends with any interior.

30.3"768mm

24.6"624mm

12.6"320mm

10.1"257mm

10.4"264mm

3"76mm

OFF-ROAD

The R-9727 sets the standard for rooftop air conditioners in tough work environments. Renowned for its build quality, reliability, and performance, the R-9727 uses a sealed, long-life evaporator and condenser motor with a slinger ring and hubcap for protection from weather and dust. The heavy-gauge steel casing is gusseted and reinforced for structural integrity. Rubber hood tie-downs unlatch to easily expose the components for service. Options include a hydraulic compressor kit, remote-mount filter, and in-line booster blower for a pressurized, dust-free cab.

R-9727 RooftopAir ConditionerCONSTRUCTION • MINING • AGRICULTURE

R-9727 S P E C I F I C A T I O N SBTUS Cooling – 22,000 BTU/Hr with 36°F (6.4 kw w/2.2°C) refrigerant temperature and 80°F (26.7°C) wet bulb entering airAIR FLOW Evaporator – 320 CFM (544 m3/h) Condenser – 850 CFM (1444 m3/h)WEIGHT 104 Lbs (47 Kg)MOTORS Evaporator – One 12 VDC, three-speed, 24 VDC available Condenser – One 12 VDC, single-speed, 24 VDC available CURRENT 29 amps @ 13.6 VDC (includes 4 amps for A/C clutch) DRAW 15 amps @ 27.2 VDC (includes 2 amps for A/C clutch)CONTROLS Three speed blower and adjustable thermostat

R-9727 SYSTEM ORDERING GUIDE R-134a NOTESUNITS R-9727-2P 12 VDC R-9727-2-24P 24 VDC

CONDENSER Contained in R-9727 Unit

INSTALLATION KIT 78R1605 Refrigerant hose and fittings

OPTIONS Winter Cover RD-5-4031-0P Stiffener Brackets RD-3-5790-0P Remote Mount Filters ** 78R5100 (Horizontal) Remote Mount Filters ** 78R5110 (Vertical) Replacement Filters 78R5210 (Remote Mount) Replacement Gasket Kit RD-2-0961-0P Replacement Recirc. Filter 78R5300 Pressurizer Inlet Cap RD-5-6423-0P In-Line Booster Pressurizers * 73R9202 (12 VDC) For use with Remote Mount Filters 73R9204 (24 VDC) Replacement Receiver Drier 74R2536 Replacement Plenum RD-2-5974-0P Hydraulic Compressor Kit RD-5-13484-0P

COMPRESSOR Requires compressor and mounting kit See 75 Series Compressor section on page 329

* Booster Pressurizer Can Only Be Used With Remote Mount Filters ** Must be used with In-line Booster Pressurizer

Shown with optional hydraulic compressor kit.

Ship LTL Only

HEATER-A/C

PAGE 33

RED DOT UNITS

R-9750 SYSTEM ORDERING GUIDE R-134a NOTESUNITS R-9750-9P 12 VDC – Heater - A/C R-9750-9-24P 24 VDC – Heater - A/C R-9750-10P 12 VDC – A/C Only R-9750-10-24P 24 VDC – A/C Only

CONDENSER Radiator Mount See 77 Series Condensers section Remote Mount See 77R7100 RD-4-4968-0P on page 460

INSTALLATION KIT 78R1705 Refrigerant hose, fittings and hardware 78R1077 Rooftop condenser EZ Clip version

OPTIONS Outside Air Adapter RD-3-4784-0P Remote Mount Filters See Filters & Pressurizers section Replacement Recirc. Filter 78R5310 In-Line Booster Pressurizers * See Filters & Pressurizers section Heat Conversion Kit RD-5-5982-1P Metal Converter Controls RD-5-7999-1P Cable RD-5-5505-33P

COMPRESSOR Requires compressor and mounting kit See 75 Series Compressor section on page 329

* Booster Pressurizer Can Only Be Used With Remote Mount Filters

2.2"55mm

24.7"626mm

20.6"523mm

16.7"425mm

5.0"127mm

Air In

R-9750 S P E C I F I C A T I O N SBTUs Cooling – 17,000 BTU/Hr with 36°F (5 kW with 2.2°C) refrigerant temperature and 80°F (26.7°C) wet bulb entering air Heating – 25,600 BTU/Hr @ 100°F (7.5 kW @ 37.8°C) air temperature riseAIR FLOW 240 CFM (408 m3/h)WEIGHT 44 lbs. (20 kg)CURRENT 13 amps @ 13.6 VDC (includes 4 amps for A/C clutch) DRAW 6.5 amps @ 27.2 VDC (includes 2 amps for A/C clutch)

OFF-ROAD

R-9750 HeadlinerAir Conditioner with Heat OptionCONSTRUCTION • MINING • AGRICULTURE

The R-9750 is the ideal headliner A/C unit for off-highway equipment cabs. It quickly produces 240 CFM of airflow, filters recirculating cab air, and its heater option delivers year-round comfort. Four multidirectional louvers deliver the air where you need it. Options include an outside air adapter, remote-mount filter, and in-line booster blower for a pressurized, dust-free cab.

HE

ATER

-A/C

PAGE 34

RED DOT UNITS

R-9753 SYSTEM ORDERING GUIDE R-134a NOTESUNITS R-9753-0P 12 VDC – A/C Only R-9753-0-24P 24 VDC – A/C Only R-9753-1P 12 VDC – Heater - A/C R-9753-1-24P 24 VDC – Heater - A/C

CONDENSER Radiator Mount See 77 Series - Condensers section on page 441 Remote Mount See 77R7100 RD-4-4968-0P on page 460

INSTALLATION KIT 78R1705 Refrigerant hose, fittings an hardware 78R1077 Rooftop condenser EZ Clip version

COMPRESSOR Requires compressor and mounting kit See 75 Series Compressor section on page 329

R-9753 HeadlinerHeater/Air Conditioner UnitOFF-ROAD • CONSTRUCTION • INDUSTRIAL

R-9753 S P E C I F I C A T I O N SBTUs Cooling - 17,000 BTU/Hr Heating - 20,000 BTU/HrAIR FLOW 230 CFM (391 m3/h) WEIGHT 24 lbs. (11kg)CURRENT 18 amps at 13.5 VDC DRAW 9 amps at 27 VDC

OFF-ROAD

The R-9753 compact headliner air conditioner was designed for hard to air condition cabs. Its compact, low profile, heavy duty construction makes this unit the best in its class for OFF-ROAD applications. With its capacity to filter recirculated air, dusty environments are not a problem.

12.2"310mm

20.62"524mm

4.83"123mm

R-9753

HEATER-A/C

PAGE 35

RED DOT UNITS

R-9755 HeadlinerAir Conditioner UnitCONSTRUCTION • MINING • AGRICULTURE • INDUSTRIAL

22.0"559mm

14.5"367mm

5.0"128mm

R-9755 S P E C I F I C A T I O N SBTUs Cooling – 17,000 BTU/Hr with 36°F (5 kW with 2.2°C) refrigerant temperature and 80°F (26.7°C) wet bulb entering airAIR FLOW 240 CFM (408 m3/h)WEIGHT 32 lbs. (14.5 kg)CURRENT 14.1 amps @ 13.6 VDC (includes 4 amps for A/C clutch) DRAW 7 amps @ 27.2 VDC (includes 2 amps for A/C clutch)

R-9755 SYSTEM ORDERING GUIDE R-134a NOTESUNITS R-9755-0P 12 VDC - A/C only R-9755-0-24P 24 VDC - A/C only

CONDENSER R-9720-12P Remote Mount R-9720-12-24P Remote Mount

INSTALLATION KIT 78R1705 Refrigerant hose, fittings and hardware 78R1077 Rooftop condenser EZ Clip version

OPTIONS Outside Air Adapter RD-3-4784-0P Replacement Filter 78R5310 Remote Mount Filters * See Filters & Pressurizers section Replacement Recirc Filter 78R 5350 In-Line Booster Pressurizers See Filters & Pressurizers section

COMPRESSOR Requires compressor and mounting kit See 75 Series Compressor section on page 329

* Booster Pressurizer can only be used with Remote Mount Filters

OFF-ROAD

Perfect for compact and hard-to-cool truck and off-highway equipment cabs. The R-9755 produces 240 CFM of airflow, filters recirculating cab air, and is just 14.5 inches front to back. Options include an outside air adapter.

HE

ATER

-A/C

PAGE 36

RED DOT UNITS

R-9757 RooftopHeater/Air ConditionerCONSTRUCTION • MINING • AGRICULTURE

With heating and cooling, the R-9757 rooftop unit delivers comfort and performance in any environment. The low-profile ceiling plenum blends with any interior. Options include a remote-mount filter and in-line booster blower for a pressurized, dust-free cab.

OFF-ROAD

R-9757 S P E C I F I C A T I O N SBTUs Heating – 45,000 BTU/Hr @ 100°F (13.2 kw @ 37.8°C) air temperature rise Cooling – 25,000 BTU/Hr with 36°F (7.3 kw with 2.2°C) refrigerant temperature and 80°F (26.7°C) wet bulb entering airAIR FLOW 400 CFM (680 m3/h)WEIGHT 135 lbs. (61kg)MOTORS Evaporator – One 12 VDC, three speed (24 VDC available) Condenser – One 12 VDC low profile (24 VDC available)CURRENT 38.2 amps @ 13.6 VDC (includes 4 amps for A/C clutch) DRAW 19.1 amps @ 27.2 VDC (includes 2 amps for A/C clutch)

R-9757 SYSTEM ORDERING GUIDE R-134a NOTES UNITS R-9757-0P 12 VDC - Heater A/C R-9757-0-24P 24 VDC - Heater A/C

CONDENSER Contained in the R-9757

INSTALLATION KIT 78R1805 Refrigerant hose, fittings and hardware.

OPTIONS Replacement Filter RD-3-6406-1P (Fresh Air Filter Box) Paper Replacement Filter RD-3-6407-0P (Fresh Air Filter Box) Remote Mount Filters ** 78R5100 (Horizontal) 78R5110 (Vertical) Replacement Filters 78R5210 (Remote Mount) Replacement Gasket Kit RD-3-9706-0P (Gasket Kit) Replacement Recirc. Filter 78R5370 In-Line Booster Pressurizers * 73R9202 (12 VDC) For use with Remote Mount Filters 73R9204 (24 VDC) Replacement Receiver Drier 74R2546

COMPRESSOR Requires compressor and mounting kit See 75 Series Compressor section on page 329

* Booster Pressurizer can only be used with Remote Mount Filters ** Must be used with In-line Booster Pressurizer

33.7"857mm

25.9"657mm

11.8"300mm

7.5"190mm

7.5"190mm

17.0"430mm

2.5"80mm

4.0"100mm

RecirculatingAir Cutout

Air OutletCutouts

Ship LTL Only

HEATER-A/C

PAGE 37

RED DOT UNITS

R-9759 Headliner Heater/Air Conditioner Unit OFF-ROAD • CONSTRUCTION • INDUSTRIAL

R-9759 S P E C I F I C A T I O N SBTUs Cooling - 25,000 BTU/Hr Heating - 30,000 BTU/Hr AIR FLOW 400 CFM (680 m3/h)WEIGHT 40 lbs. (18 kg) CURRENT R-9759-0P 22.5A @ 13.5V DRAW R-9759-0-24P 11A @ 27V

OFF-ROAD

Delivering 400 CFM through five outlets, the R-9759 provides exceptional comfort in demanding conditions. Available as a heater-A/C combination or A/C-only. Optional filtration is available for the cab as well as incoming outside air when pressurization is required.

27.0"686mm

17.59"447mm

6.48"165mm

17.59"447mm

R-9759

R-9759 SYSTEM ORDERING GUIDE R-134a NOTESUNITS R-9759-0P 12 VDC - A/C only R-9759-0-24P 24 VDC - A/C only R-9759-1P 12 VDC - Heater A/C R-9759-1-24P 24 VDC - Heater A/C

CONDENSER R-9720-12P Remote Mount R-9720-12-24P Remote Mount

INSTALLATION KIT 78R1705 Refrigerant hose, fittings and hardware 78R1077 Rooftop condenser EZ Clip version

COMPRESSOR Requires compressor and mounting kit See 75 Series Compressor section on page 329

OPTIONS:Fresh Air Filter Kit: RD-5-14081-0P