INTERNATIONAL NV AQUASYSTEMS INTERNATIONAL NV … · 2017. 2. 17. · • Over 360 degrees evenly...

2
AQUASYSTEMS INTERNATIONAL NV Low energy consumption mixing High mixing capacity: No dead zones • Low noise • Robust construction Power from 0,75 kW to 30 kW • Over 360 degrees evenly distributed flow via the cone-shaped mixer body Non clogging due to the cone shaped mixer • Heavy duty gearbox • Simple installation: Basin does not have to be emptied • Rental availability • Mixer can be equipped with extended legs to stand over obstructions like piping, diffusors, ... • CFD capabilities Low forces on gearbox Easy replacement of the bearing sleeve in filled basin or bridge mounted execution thanks to the engineered solution with guide cone on the static bearing part AQUA TURBO ® MIX-GS Low speed submersible mixer

Transcript of INTERNATIONAL NV AQUASYSTEMS INTERNATIONAL NV … · 2017. 2. 17. · • Over 360 degrees evenly...

Page 1: INTERNATIONAL NV AQUASYSTEMS INTERNATIONAL NV … · 2017. 2. 17. · • Over 360 degrees evenly distributed flow via the cone-shaped mixer body • Non clogging due to the cone

AQUASYSTEMSINTERNATIONAL NV

AQUASYSTEMSINTERNATIONAL NV

• Low energy consumption mixing• High mixing capacity: No dead zones• Low noise• Robust construction• Power from 0,75 kW to 30 kW• Over 360 degrees evenly distributed flow via the cone-shaped

mixer body • Non clogging due to the cone shaped mixer• Heavy duty gearbox• Simple installation: Basin does not have to be emptied• Rental availability• Mixer can be equipped with extended legs to stand over

obstructions like piping, diffusors, ... • CFD capabilities• Low forces on gearbox• Easy replacement of the bearing sleeve in filled basin or bridge

mounted execution thanks to the engineered solution with guide cone on the static bearing part

AQUA TURBO® MIX-GS Low speed submersible mixer

Page 2: INTERNATIONAL NV AQUASYSTEMS INTERNATIONAL NV … · 2017. 2. 17. · • Over 360 degrees evenly distributed flow via the cone-shaped mixer body • Non clogging due to the cone

Typical executions

Basic Data

The MIX-GS is available with submersible motor/gearbox or with dry mounted gearbox on top of a walkway, an extended shaft and bottom bearing.

Motor power Impeller diameter R.P.M.30,00 kW 2300 – 2800 mm 41,6

22,00 kW 2300 – 2500 mm 37,6

18.50 kW 2300 – 2500 mm 32,5

15,00 kW 2300 – 2500 mm 32,4

11,00 kW 2300 – 2500 mm 29,4

7,50 kW 2000 mm 32,3

5,50 kW 2000 mm 30,8

4,00 kW 2000 mm 27,6

3,00 kW 1500 mm 40,8

2,20 kW 1500 mm 33,1

1,50 kW 1500 mm 30,0

1,10 kW 1500 mm 23,5

0,75 kW 1500 mm 20,0

All values are indicative. Aquasystems International NV reserves the right to adjust these values at any time.

HeadquarterAQUASYSTEMS INTERNATIONAL n.v.

Brusselsesteenweg 508 • B-1500 Halle – Belgium Tel.: +32 (2) 362 02 62 • Fax: +32 (2) 360 35 89 [email protected] • www.aquaturbo.be

SubsidiaryAQUATURBO SYSTEMS INC. -USA

AQUASYSTEMS INTERNATIONAL n.v.

Sales Office in UK and a world-wide network of distributors and agents

To find an agent or distributor in your area, please visit our NEW website www.aquaturbo.be