INTERNATIONAL ASSOCIATION OF AHMADI ARCHITECTS & ENGINEERS USA (IAAAE-USA) WEST COAST REGION...
12
INTERNATIONAL ASSOCIATION OF AHMADI ARCHITECTS & ENGINEERS USA (IAAAE-USA) WEST COAST REGION PRESENTED BY: MANSOOR ISHFAQ Regional President IAAAE West Coast Together we are engineering a better future!
-
Upload
jaiden-greve -
Category
Documents
-
view
230 -
download
3
Transcript of INTERNATIONAL ASSOCIATION OF AHMADI ARCHITECTS & ENGINEERS USA (IAAAE-USA) WEST COAST REGION...
INTERNATIONAL ASSOCIATION OF AHMADI ARCHITECTS & ENGINEERS USA (IAAAE-USA)
WEST COAST REGIONPRESENTED BY:
MANSOOR ISHFAQRegional President IAAAE West Coast
Together we are engineering a better future!
WHAT IS IAAAE ?
Founded in 1980 by Hadrat Khalifatul Masih III, Mirza Nasir Ahmad (rh).
The Association operates directly under the patronage of Khalifatul Masih V (ABA).
Chapters in Pakistan, UK, USA, Canada and Australia.
WHAT DOES IT DO?
Meets Jama’at Architectural and Engineering needs
Supports planning efforts for new mosques projects
Provides technical advise to the mosque committees
Identifies sustainable design elements at the mosques
Advises local property secretary on mosque
maintenance
Provides cost saving solutions to the projects
Helps conduct energy audits at the mosques
Provides job resources and networking opportunities
Provides engineering guidance to Atfal/Khuddam and
Waqfe Nau children
Provides technical support to Humanity First
Collaborates with IAAAE chapters worldwide.
WHO IS WHO
Finance Secretary: Sayim Malik
MS. Construction Management 11 years experince in facilities design and
construction management Currently works as Capital Projects Manager at
SUNY purchase, Westchester County, NY
President IAAAE USA: Junaid Malik
BSc. Civil Engineering 13 years of experience in Public Works Engineering,
including water and roadway infrastructure. Currently works as a Project Manager with Whitman
Requardt and Association, Fairfax, VA
General Secretary: Fazal Mahmood
BSc. Civil Engineering 13 years of experience in civil contracting Currently owns and operates construction company
in Brooklyn, NY
WHO IS WHO
Regional President West Coast: Mansoor Ishfaq
MSc. Civil Engineering 10 Years of Experience; Land Development,
Construction, Project Management & Planning Currently Works at the Los Angeles World Airport Editor of IAAAE Quarterly Newsletter
Regional President Gulf Coast: Alamzeb Hafeez Khan
MSc. Electrical Engineering 5 Years of Experience; Electronics for Instrumental Tools &
Downhole Electronics Motors and Generators Currently Works at the National Oilwell Varco in Houston Teaching Petroleum Instrumentation at the Community
College
Regional President N-E: Asim Malik
MSc. Electrical Engineering 5 Years of Experience; Electronics for Instrumental Tools &
Downhole Electronics Motors and Generators Currently Works at the National Oilwell Varco in Houston Teaching Petroleum Instrumentation at the Community
College
Regional President M-W: Syed Saad Hasan
MSc. Electrical Engineering 5 Years of Experience; Electronics for Instrumental Tools &
Downhole Electronics Motors and Generators Currently Works at the National Oilwell Varco in Houston Teaching Petroleum Instrumentation at the Community
College
KICK OFF EFFORTS
QUARTERLY NEWSLETTERS
KICK OFF EFFORTS
IAAAE USA WEB SITE
www.ahmadiyya.us
Click Auxiliaries
Click Official Website of IAAAE-USA
IAAAE MODERN VILLAGE MALI
IAAAE MODERN VILLAGE MALI
WHATS IN THE PIPELINE
Feed Project Managers for Building New Mosques & for Maintenance of Existing
Take Ownership of Humanity First Projects Coordinate With UK Chapter for International Projects Launch International Technical Seminar in Baitur Rahman
Mosque
Launch Energy Audits of Mosques in USA & Provide Recommendations to Property & Finance Departments
Assist Property Department Archiving As-builts
Provide Technical Recommendations to Property Department
SHORT TERM PLAN
LONG TERM PLAN
WANNA JOIN?
All Ahmadi Engineers, Architects and technologists are eligible for membership subject to the followings conditions:
Lifetime = $100 Annual = $35 Student= $15
All Engineers and Architects who hold bachelor degrees or equivalent diploma in Engineering or Architecture and or are members of recognized professional Institute of National/International level.
All Engineers and Architects who possess diploma from such schools/ Polytechnics Institutes where the duration of course is a minimum of two/three years for Engineering and three/four years for Architecture.
