Interior - Old Dog Street Rods

LizardSkinTM SC is used by custom car, street rod, truck builders & RV owners who want to reduce unwanted noise &/or enhance the sound of their high end audio systems. It is best applied by special spray gun to a clean & dry primed or painted rust free surface. Typical applications include firewalls, floor pans, transmission tunnels, doors, hoods, trunk lids, under headliners, inside fenders, panel van walls & other areas that generate vibration & noise. For maximum acoustic performance, coat entire interior surface & the floor inside & out. Dramatically reduces noise and vibration, Protect surfaces from moisture and corrosion, Withstand temperatures to 300° F. (149o C.) A 2- gallon container covers approximately 100 sq. ft. at 20/1000’s (Max thickness 40/1000’s for maximum effectiveness). Can not be applied over bare metal.Part # Details PriceLIZ 50115 Lizard Skin Sound Control $157.50

LizardSkin™ - Sound Control Formula

LizardSkin™ Ceramic Insulation provides hot rod and custom car hobbyists with the finest thermal and acoustic insulation available. It is best applied by special spray gun to a clean and dry primed or painted rust-free steel.Can be sprayed, rolled on or brushed. The product is black in color. Two gallons will cover 46-50 square feet at thickness of .040” (about thickness of credit card). It can be sanded, primed and painted, and can be used to cover hard to reach areas like inner door panels. It can even be used under fenders to eliminate starring. Withstands temperatures to 500°F, reduces engine and solar heat transfer by 25-30°F, reduces noise by 10-12 decibels, and forms a continuous airtight, waterproof membrane. It cleans up with soap & water, no respirator needed, but paper dust mask & protective eyewear are recommended.Part # Details PriceLIZ 50000 One Gallon - Ceramic Insulation $89.25LIZ 50100 Two Gallons - Ceramic Insulation $168.00

*All prices are subject to change without notice.

INTERIOR

IN

LizardSkin™ - Ceramic Insulation

This pressure sensitive industrial aluminum foil tape is easily trimmed with household scissors. Insul-TapeTM can readily conform to irregular surfaces, sealing seams, edges and joints while providing a superior vapor barrier.Part # Details PriceBLI BLIT2030 Insul-TapeTM 30 Ft. Roll $3.95

Insul-Tape™

Old Dog general purpose spray adhesive provides instant tack, high strength, temporary and permanent bonds. Part # Details PriceODR CAM300 Spray Trim Cement (14 oz.) $10.95

The InsulatorTM provides a superior sound barrier & heat barrier. Made of durable denim/cotton padding & covered with a 99.5% pure aluminum foil barrier. Easy installation on firewalls, floorboards, trunks, & interiors using Insul-TapeTM and Trim Cement (sold separately). The InsulatorTM is available with either single faced or double-faced aluminum foil.Part # Details PriceBLI PL1406 - BB The InsulatorTM - 4’ x 6’ with Single-Side Foil $26.95BLI PL2406 - B The InsulatorTM - 4’ x 6’ with Double-Side Foil $32.95

Old Dog - Trim Cement Spray

The Insulator™

(314) 291-RODS www.olddogstreetrods.com Toll Free 1(866)291-1940274

LizardSkin™ - SuperPro Spray Gun KitProfessional quality spray gun designed to handle the high density and viscosity of LizardSkin™ Insulation. The kit comes with extra nozzles and flexible spray wand for hard to reach areas, and a cup that can be used for application to small areas. The kit also includes a stir paddle (attaches to drill), a 48” siphon hose (5/8 inch ID thick wall rubber), and a 12-inch siphon tube (1/2 inch ID, 5/8 Inch OD metal conduit).Part # Details PriceLIZ 50125 Super Pro Spray Gun Kit $80.00

(314) 291-RODS www.olddogstreetrods.com Toll Free 1(866)291-1940 275

Dynamat is a thin, flexible material that stops vibration noise & distortion at the source. Eliminates speaker distortion & stops other outside noise from entering your vehicle’s interior.Part # Details PriceDCI 10415 Dynamat Speaker Kit $19.95The Dynamat Speaker Kit transforms the flimsy sheet metal car door into a solid nonresonant speaker baffle that eliminates distortion and improves mid-bass performance.

DCI 11905 Dynamat Hoodliner $79.95The Dynamat Hood liner has “Sound Soaker” foam absorbs engine noise up to 87%, delivering a quieter listening experience in your vehicle. The 1mil reinforced aluminized skin creates a water/oil barrier that reflects 97% of radiant heat to protect your paint’s finish.

DCI 10435 Dynamat Door Kit $94.95Road noise robs you of dynamic range requiring more power for the same listening level. The Dynamat Door Kit’s “Sonic Barrier” eliminates speaker distortion and lowers road noise increasing your effective amplifier power.

DCI 11102 Dynaliner (12 square foot x 1/4” Thick) $69.95Dynaliner is the perfect ultra light weight insulator to use on top of Dynamat. This durable crush and tear resistant material has the highest heat blocking properties available in a single layer synthetic foam-type material. Dynaliner isn’t affected by oil and does not absorb water. Dynaliner provides acoustic isolation and excellent thermal insulation for roof, firewall, floor, quarter panels, doors and even as a hoodliner. Self-adhesive.

DCI 11103 Dynaliner (12 square foot x 1/2” Thick) $112.95Dynaliner is the perfect ultra light weight insulator to use on top of Dynamat. This durable crush and tear resistant material has the highest heat blocking properties available in a single layer synthetic foam-type material. Dynaliner isn’t affected by oil and does not absorb water. Dynaliner provides acoustic isolation and excellent thermal insulation for roof, firewall, floor, quarter panels, doors and even as a hoodliner. Self-adhesive.

DCI 19105 Dynamat Trunk Kit $124.95When your car stereo rattles your trunk, the sound becomes distorted and you lose SPL. That’s because your vehicle’s structure cannot handle the high bass pressure without proper reinforcement. The Dynamat Trunk Kit maximizes structural reinforcement and eliminates rattles, providing the tightest, cleanest, loudest bass possible.

DCI 19100 Dynamat License Plate Kit $9.95Stop License Plate Rattles.

DCI 21100 Dynapad (12 square foot x 3/8” Thick) $134.954 Part composite w/1 lb. per sq. ft. barrier material. Solves exhaust system heat & low frequency noise.

Dynamat®

IN

INTERIOR*All prices are subject to change without notice.

Dynamat® - Installation ToolsDynamat Installation ToolsPart # Details Price

HushMat specializes in reducing unwanted noise in your vehicle by eliminating structural vibration, reducing heat, road noise, engine noise, engine exhaust, and radiant heat. You experience the quality sound and comfort of your automobile with HushMat.

Mirrors are machined from billet aluminum and feature a stainless steel swivel supported by nylon inserts which provide smooth and accurate adjustments that stay in position.Part # Details PriceBIL 73420 Large Rectangle (1 3/4” X 5 1/4”) $48.95BIL 73520 Oval (2 5/16” X 4 3/16”) $53.95

Billet Specialties™ - Interior Mirror Heads

HSH 10151 Starter Kit - 4 Sheets, 4 sq. ft. (12.1” x 12”) $25.95HSH 10201 Door Kit - 10 Sheets, 10 sq. ft. (12.1” x 12”) $64.95HSH 10301 Trunk/Compact Truck - 10 Sheets, 19 sq. ft. (12.1” x 23”) $100.95HSH 10401 Floor/Dash Kit - 20 Sheets, 39 sq. ft. (12.1” x 23”) $179.95HSH 10501 Bulk Kit - 30 Sheets, 58 sq. ft. (12.1” x 23”) $287.95

HushMat® Ultra™Part # Details Price

HSH 20200 1/4”, 2 Sheets (23.5” x 36”) $136.95

Silencer Magabond™ FoamPart # Details Price

HSH 40100 10.5 fl. oz. each $21.95

Ultra H20Use for sealing seams on your vehicle. Water based, self adhesive, 3 hour dry time. Sandable and paintable. Use standard caulking gun.Part # Details Price

HSH 90100 Pro-Roller $17.95

HushMat® Installation ToolsPart # Details Price

HushMat®

DCI 10005 Economy Roller $11.95DCI 10007 Heavy Duty Roller $14.95

Dynamat Bulk PacksPart # Details Price


INTERIOR

IN

DCI 10425 Xtreme Wedge Pak (1 Sheet, 4 sq. ft., 18” x 32”) $29.95DCI 10455 Xtreme Bulk Pak (9 Sheets, 36 sq. ft., 18” x 32”) $205.95

Dynamat® - Bulk Packs


Part # Details Price

Rear view mirrors are an easy bolt on replacement for the factory mirrors in GM, Ford & Dodge trucks. These rearview mirrors have a universal mount that simply slips over the factory glued-on windshield mount. Features distortion free glass.Part # Details Price

Universal Interior Mirrors


WYSWB1015

JENCO17683-GL

RPC S6065X Chrome Mirror with Day / Night Switch $32.95RPC S6169 Polished Aluminum “Flamed” Mirror $50.95WYS WB1018 ‘40/48 Closed Car Oval Stainless Steel Rear View Mirror $39.95WYS WB1015 ‘41 Pickup Style Oval Rear View Mirror $39.95JEN CO-17683-GL Glue-On Oval Rear View Mirror $41.11JEN CO-17683-SC Adjustable Bracket Oval Screw-On Rear View Mirror $41.11

RPCS6169X RPCS6065X

BIL 257340 Bowtie - GM 1993 - 1998 $79.95BIL 257330 Ball Milled $79.95

Billet Specialties™ - Rearview Mirrors

BIL 72120 Glue-On $16.95BIL 72220 Bolt-On $19.95

Billet Specialties™ - Interior Mirror Mounts*All prices are subject to change without notice.

INTERIOR

IN




Smooth Parts© - Interior Mirrors

2104P

2103P

VIM 8600 Inside Mirrors. Adjustable tension mounts. Same as our VIM 8660 mirrors except these are back mounted style. Choose from regular glue on, 30° mount glue on (for slanted windshields) or 30° mount bolt on such as for Duvall windshield.Part # Details PriceSPL VIM-8600 VIM 8600 Inside Mirrors $100.00SPL VIM-8600-30-E VIM 8600 Inside Mirrors $100.00VIM 8660 Inside Mirrors ~ All mirrors have adjustable tension mounts. All inside mirrors havefully radiused edges and the swivel in the base leaving the back of the mirror with Smooth flowing lines. Valleys 2 1/8” x 5 3/8” Oval mirrors retain the old look with the smoothness oftoday’s styling.Part # Details PriceSPL VIM-8660-D VIM 8660 Inside Mirrors $100.00VIM 200 D/N Now you can have a custom mirror with the Day / Night feature you prefer. Five different mounting brackets. Part # Details PriceSPL VIM-200D/N-A ‘35 - ‘40 Ford $125.00 eachSPL VIM-200D/N-B ‘34 - ‘35 Chevy $125.00 eachSPL VIM-200D/N-C ‘32 - ‘34 Ford $125.00 eachSPL VIM-200D/N-D Universal $125.00 eachSPL VIM-200D/N-E Glue On with Glue Kit $125.00 each

VI200DM

VIM8660

VIM8600

2102P

2130P2120P


INTERIOR

IN 2110P

SUN 2110P 2” X 5 1/2” Oval Mirror $40.00SUN 2120P Foose “Big Boy” $65.00SUN 2130P 2” X 7” Oval Mirror $65.00Sun Spec - Billet Mirror PostPart # Details PriceSUN 2102P Roof Mount $35.00SUN 2103P Glue-On Mount $25.00SUN 2104P Swivel Extension $35.00

Sun Spec© - Billet Mirrors

If you have any questions about the products we carry, please call us!


The Standard viewer is made with a plastic prism. The Deluxe viewer has a glass prism.Part # Details Price

Durable chrome plated bezel with a frosted lense. 4.5” x 2” x 0.75”.Part # Details Price

A modern car feature for your favorite ride. This attractive dome light has a switch built right into the lens. Convenient size is just 4 1/2” X 2 1/2”, snaps into place - a hole template is provided. Bulb and 24” pre-wired leads included. Tan colored plastic housing fits into most interior motifs.Part # Details PriceWSW L82 Switched Dome Light $45.00 each

Watson’s StreetWorks© - Switched Dome Light

CMW DM-402 Elliptical Dome Light $55.00

Clayton Machine Works© - Dome Light

Chrome swivel head reading lights w/on-off switch.Part # Details PricePAC 31436 Single Reading Light (2 3/4” x 3 1/2”) $7.95PAC 31437 Double Reading Light (2 3/4” x 6 1/2”) $14.95

Pacific Antique© - Chrome Reading LightsPACA5169PACA5168

PAC A5168 Standard Traffic Lite Viewer $10.95PAC A5169 Deluxe Traffic Lite Viewer $21.95

Pacific Antique© - Traffic Lite Viewers

Keep smooth lines of interior in tact with elliptical lights. Polished finish (4”W x 2”H x 1”D)Part # Details PriceBIL 60320 Interior Light $38.95BIL 60420 Door Light (Combination Clear and Red Lens) $38.95

Billet Specialties™ - Elliptical Interior & Door Lights

Use in door panels, consoles and headliners. Polished finish (1 1/2”H x 3 5/8” L x 2” D)Part # Details PriceBIL 60120 Interior Light $38.95BIL 60220 Door Light (Combination Clear and Red Lens) $38.95

Billet Specialties™ - Interior & Door Lights


INTERIOR

IN

Billet Aluminum Interior Lights are available in either Satin or Polished finish. Fiberglass mounting pods available - inquire!Part # Details Price

This is a great little light for your glove box. Lamp is mounted to a bracket, kit is ready to install with tilt switch, screws and connectors.Part # Details Price

Kit contains two G.M. style under the dash courtesy lamp sockets with lead wires, butt terminals, and door jamb switches.Part # Details Price

Trique Manufacturing interior lighting features 6 bright white L.E.D’s to illuminate your interior with a vibrant white light.Part # Details PriceTRI OIL Polished Oval Interior Light $59.95TRI OIL30 Polished Oval Interior Light with 30° Radius Bezel $59.95

Trique© - Interior Lights

HAY D2017 Courtesy Light Kit $22.00

Haywire© - Courtesy Light Kit

WSW L03 Interior Light with Tilt Switch $24.95

Watson’s StreetWorks© - Light with Tilt Switch

SPC 2050P Oval - Polished Finish (3 5/8” x 1 1/7”) $45.95SPC 2050S Oval - Satin Finish (3 5/8” x 1 1/7”) $39.95SPC 2051P Tear Drop - Polished Finish (3 5/8” x 1 1/7”) $45.95SPC 2051S Tear Drop - Satin Finish (3 5/8” x 1 1/7”) $39.95

Smart Parts© - Interior Lights

Smart Parts offers single and double dome lights with push-on, push-off lenses. Lights have a polished aluminum bezel. Fiberglass mounting pods available - inquire!Part # Details Price


INTERIOR

IN

SPC 2052P Single Dome Light - 3 1/2” x 3 1/2” $90.95SPC 2053P Double Dome Light - 3 1/2” x 8” $106.95

Smart Parts© - Dome Lights



Sun Spec© - Billet A/C Vents

Polished billet finish.Part # Details PriceSUN 1610P A/C Vent - Slotted Face $55.00SUN 1611P A/C Vent - Ball Vent Face $75.00

Billet Specialties™ - VentsFully adjustable, attaches to 2 1/2” round flexible hose.Dash opening should be 2 1/2” in diameter.

BIL 38220 Silhouette $44.95BIL 38320 Slotted $44.95

Billet Air Conditioning Vents (Feature Aluminum Bezels and Louvers)Part # Details Price

BIL 38110 Billet Bezel with Plastic Louvers $25.95

Billet Bezel Air Conditioning Vent (Feature Aluminum Bezels with Black Plastic Louvers)Part # Details Price

Trique© - A/C Vents

Trique Manufacturing A/C Vents are machined from billet aluminum with polished stainless steel inserts.Part # Details PriceTRI DOAC Dual Polished Oval A/C Vent $129.95TRI DOAC30 Dual Polished Oval A/C Vent with 30° Radius Bezel $129.95TRI OAC Single Polished Oval A/C Vent $69.95TRI OAC30 Single Polished Oval A/C Vent with 30° Radius Bezel $69.95

Parr Automotive© - Vents

Part # Details PricePAI PRR5026 Small Art Deco Polished Rec A/C Vent $29.95PAI PRR5030 Large Art Deco Polished Rec A/C Vent $29.95PAI PRR5016 Art Deco Polished Round A/C Vent $29.95

Clayton Machine Works© - Oval Vents

Chrome plated bezel. Adjustable airflow. Paintable inner bezel.Part # Details PriceCMW AC-902 Oval Louver (4” X 1.6”) $99.00


INTERIOR

IN

Polished billet dash knobs are designed to match Zoops column Dress-up kits.Part # Details Price

SMOOTH

VINTAGE

CLASSIC

Haywire© - Dash Knob

Universal fit, with a 3/16” bore and set screw. Polished finish only.Part # Details Price

Fully functional with an OE quality heating element, Billet Specialties lighters are a great addition to your dash. Element length: 13/16”.Part # Details Price

Floor it with style! Billet Specialties new billet pedals provide show car looks with precision machining and performance. Stainless hardware, multiple mount points, fully adjustable arms and a wider more stable base are just some of the key engineered features that make our pedals stand out. Top it all off with our award winning mirror finish. Billet Specialties pedals are truly in a class by themselves. Part # Details PriceBIL 199110 Rectangular Gas Pedal - Polished $99.95BIL 199115 Rectangular Gas Pedal - Black $99.95BIL 199130 Oval Gas Pedal - Polished $99.95BIL 199135 Oval Gas Pedal - Black $99.95BIL 199310 Rectangular Brake Pedal -Polished $32.95BIL 199315 Rectangular Brake Pedal - Black $32.95BIL 199330 Oval Brake Pedal - Polished $32.95BIL 199335 Oval Brake Pedal - Black $32.95BIL 199870 Universal Dimmer Switch Cover - Polished $13.95BIL 199875 Universal Dimmer Switch Cover - Black $13.95


INTERIOR

IN Billet Specialties™ - Street Rod Gas & Brake Pedals

BIL 264122 Short Ribbed $14.95BIL 264128 Short Ribbed Flame $14.95BIL 264222 Long Ribbed $14.95

Billet Specialties™ - Lighters

BIL 26001 Vintage Dash Knob $9.95BIL 26002 Classic Dash Knob $10.95BIL 26003 Smooth Dash Knob $10.95

Billet Specialties™ - Dash Knobs

ZPI 7025 3/16” Hole $10.95

Zoops© - Billet Dash Knobs


Brushed aluminum dash knob to dress up your interior.Part # Details PriceHAY D1039 3/16” Hole $4.30


Billet Specialties™ - ‘67 - ‘69 Camaro/Firebird Pedals

Convert your factory linkage to smooth cable operation. Attaches to factory location. CNC Machined for a hi-tech look. Includes carbon vinyl insert. Part # Details PriceBIL 199260 Gas Pedal Pad - Polished $39.95BIL 199265 Gas Pedal Pad - Black Anodized $39.95BIL 199360 Brake/Clutch Pad - Polished $34.95BIL 199365 Brake/Clutch Pad - Black Anodized $34.95BIL 199460 Automatic Brake Pad - Polished $39.95BIL 199465 Automatic Brake Pad - Black Anodized $39.95BIL 199660 E-Brake Pad - Polished $24.95BIL 199665 E-Brake Pad - Black Anodized $24.95

Lokar® - Eliminator Floor Mount Gas PedalThis pedal eliminates routing cables through the firewall and comes equipped with an aluminum splined adjustable shaft and stainless steel “under-the-floor” cable mounting bracket. Mounts in multiple positions to accommodate multiple floor and toe board angles. Designed with built in pedal stops. Requires the use of Lokar’s 36” U-Cut-to-Fit Throttle Cable.Part # Details PriceLOK FMG-6097 Billet Gas Pedal $145.95LOK FMG-6098 Billet Gas Pedal with Rubber Pad Inserts $145.95LOK XFMG-6098 Billet Gas Pedal w/Rubber Pad Inserts - Black Anodized $145.95LOK GPS-6016 1/2” Floor Mount Pedal Spacer $31.95LOK XGPS-6016 1/2” Floor Mount Pedal Spacer - Black Anodized $31.95

Lokar® - Lakester Trottle Pedals & PadsThese new nostalgic style pedals are available in chromed, black and raw. This unique pedal design will give your favorite vehicle an all new look. The throttle pedal is designed using Delrin bushings for smooth operation when throttling up or down during daily use.Part # Details PriceLOK BAG-6151 Lakester Steel Throttle Pedal - Chrome $78.95LOK XBAG-6151 Lakester Steel Throttle Pedal - Black $77.95LOK BAG-6154 Lakester Steel Throttle Pedal - Raw $78.95LOK BAG-6152 Lakester Steel Brake/Clutch - Chrome $50.95 / eachLOK XBAG-6152 Lakester Steel Brake/Clutch - Black $50.95 / eachLOK BAG-6155 Lakester Steel Brake/Clutch - Raw $50.95 / eachLOK BAG-6153 Lakester Steel Automatic Brake - Chrome $56.95LOK XBAG-6153 Lakester Steel Automatic Brake - Black $56.95LOK BAG-6156 Lakester Steel Automatic Brake - Raw $56.95


INTERIOR

IN


INTERIOR

IN


Chromed steel gas pedal is splined. The removable lower are is splined for versatility in mounting to the right or left of the mounting bracket. Add an “X” to front of Part Number for Black Anodized finish.Part # Details PriceLOK SPO-6070 Chromed Spooned Gas Pedal $60.95LOK SPO-6071 Round Chromed Steel Brake Pad w/Rubber $41.95LOK SPO-6072 Round Chromed Steel Dimmer Cover w/Rubber $19.95

Lokar® - Nostalgic Style Pedal Assembly

Standard assembly made Extra Large for comfort and safety. Ball milled and spring loaded aluminum gas pedal. Removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket. Matching Brake Pad is designed with a 1/2” x 20 thread stud kit and can be mounted centered or off-center. Chromed Steel Brake Pad has the stud welded in the center. Dimmer fits both Chevy and Ford.Add an “X” to front of Part Number for Black Anodized finish.Part # Details PriceLOK SG-6016 Spring-Loaded Throttle Pedal $105.95LOK SG-6017 Brake Pad $50.95LOK SG-6009 Dimmer Switch Cover $20.95

Lokar® - XL Series Billet Pedals

Ball milled and spring loaded aluminum gas pedal. Removable lower arm is splined for versatility in mounting to the right or left mounting bracket. Matching Brake Pad is designed with a 1/2” x 20 thread stud kit & can be mounted centered or off-center. Chromed Steel Brake Pad has the stud welded in the center. Dimmer fits both Chevy & Ford. Add an “X” to front of Part Number for Black Anodized finish.

LOK BAG-6001 Spring-Loaded Throttle Pedal $134.95LOK BAG-6002 Brake Pad $44.95LOK BAG-6003 Dimmer Switch Cover $20.95LOK BFR-6115 Foot Rest $61.95

Billet AluminumPart # Details Price

LOK BAG-6004 Spring-Loaded Throttle Pedal $134.95LOK BAG-6005 Brake Pad $44.95LOK BAG-6006 Dimmer Switch Cover $20.95LOK BFR-6116 Foot Rest $61.95

Billet Aluminum with Rubber InsertPart # Details Price

LOK SG-6007 Spring-Loaded Throttle Pedal $97.95LOK SG-6008 Brake Pad $44.95LOK SG-6009 Dimmer Switch Cover $20.95

Chrome Steel with Rubber InsertPart # Details Price

Lokar® - Standard Pedals


Lokar® - Oval Billet Aluminum Pedals

Lokar® - ‘55 - ‘57 Chevy Throttle Assemblies & Brake Pads

The Lokar ’55 - ’57 gas pedal assemblies are designed to convert original rod linkage to a modern throttle cable system. The Lokar gas pedal assembly mounts to original firewall location with offset bezel washers to align the throttle cable through the firewall. The matching brake and clutch pads are designed to fasten over the original ‘55 – ‘57 pedals. Add an “X” to front of Part Number for Black Anodized finish.Part # Details PriceLOK BAG-6073 Billet Aluminum Gas Pedal Assembly $139.95LOK BAG-6074 Billet Aluminum Gas Pedal Assembly with Rubber $139.95LOK BAG-6075 Billet Aluminum Brake / Clutch Pad $41.95LOK BAG-6076 Billet Aluminum Brake / Clutch pad with Rubber $41.95LOK BAG-6077 Billet Aluminum Power Brake Pad $52.95LOK BAG-6078 Billet Aluminum Power Brake Pad with Rubber $52.95LOK BAG-6079 XL Billet Aluminum Non-Power Brake Pad $52.95LOK BAG-6080 XL Billet Aluminum Non-Power Brake Pad w/Rubber $52.95

Lokar® - ‘67 - ‘69 S/B Camaro Throttle Assembly & Brake PadsThe Lokar ’67 – ’69 Camaro gas pedal assembly mounts to the stock firewall location and is designed to convert original rod linkage to a modern throttle cable system. The matching brake pad is machined to cover the stock Camaro steel pad. Add an “X” to front of Part Number for Black Anodized finish. Add an “X” to front of Part Number for Black Anodized finish.Part # Details PriceLOK BAG-6091 Billet Aluminum Throttle Pad $52.95LOK BAG-6092 Billet Aluminum Throttle Pad with Rubber $53.95LOK BAG-6093 Billet Aluminum Brake Pad $52.95LOK BAG-6094 Billet Aluminum Brake Pad with Rubber $53.95LOK BAG-6095 Billet Aluminum Gas Pedal Assembly $138.95LOK BAG-6096 Billet Aluminum Gas Pedal Assembly w/Rubber $139.95LOK BAG-6099 Billet Aluminum E-Brake Pad with Rubber $23.95LOK BAG-6100 Billet Aluminum E-Brake Pad $22.95LOK BAG-6101 Billet Aluminum Brake / Clutch Pad $47.95LOK BAG-6102 Billet Aluminum Brake / Clutch Pad w/Rubber $47.95

IN


Chromed billet aluminum gas pedal is splined . The removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket. Add an “X” to front of Part Number for Black Anodized finish.Part # Details PriceLOK BAG-6103 Mini Oval Billet Aluminum Throttle Pedal $130.95LOK BAG-6104 Oval Billet Aluminum Throttle Pedal $134.95LOK BAG-6105 XL Oval Billet Aluminum Throttle Pedal $138.95LOK BAG-6106 Mini Oval Billet Aluminum Brake Pad $40.95LOK BAG-6107 Oval Billet Aluminum Brake Pad $44.95LOK BAG-6108 XL Oval Billet Aluminum Brake Pad $47.95LOK BAG-6109 Oval Billet Aluminum Dimmer Cover $20.95

‘64 - ‘70 Mustang Billet Aluminum throttle assemblies and brake pads. Replace your worn out mustang hard throttle linkage and pedal pads with these direct replacement pedals. Uses Lokar cable and bracket. Add an “X” to front of Part Number for Black Anodized finish.Part # Details PriceLOK BAG-6115 ‘64 - ‘68 MustangThrottle Pedal w/Rubber - Brushed $160.95LOK XBAG-6115 ‘64 - ‘68 MustangThrottle Pedal w/Rubber - Black $160.95LOK BAG-6117 ‘69 - ‘70 MustangThrottle Pedal w/Rubber - Brushed $160.95LOK XBAG-6117 ‘69 - ‘70 MustangThrottle Pedal w/Rubber - Black $160.95LOK BAG-6121 ‘64 - ‘70 Mustang Clutch & Brake Pad Manual w/Rubber - Brushed (pair) $86.95LOK XBAG-6121 ‘64 - ‘70 Mustang Clutch & Brake Pad Manual w/Rubber - Black (pair) $85.95LOK BAG-6123 ‘64 - ‘68 Mustang Automatic Brake Pad w/Rubber - Brushed $53.95LOK XBAG-6123 ‘64 - ‘68 Mustang Automatic Brake Pad w/Rubber - Black $53.95LOK BAG-6125 ‘69 - ‘70 Mustang Automatic Brake Pad w/Rubber - Brushed $53.95LOK XBAG-6125 ‘69 - ‘70 Mustang Automatic Brake Pad w/Rubber - Black $53.95

Lokar® - ‘64 - ‘70 Mustang Throttle Assemblies & Brake Pads

‘62 - ‘74 Chevy II/Nova Billet Aluminum throttle assemblies and brake pads are a direct replacement. Throttle assemblies eliminate factory rod linkage. Curved design on brake and clutch pads adds a modern touch. Add an “X” to front of Part Number for Black Anodized finish.Part # Details PriceLOK BAG-6126 ‘62 - ‘67 Chevy II/Nova Throttle Pedal Assembly - Brushed $152.95LOK BAG-6127 ‘62 - ‘67 Chevy II/Nova Throttle Pedal Assembly w/Rubber - Brushed $153.95LOK XBAG-6127 ‘62 - ‘67 Chevy II/Nova Throttle Pedal Assembly w/Rubber - Black $152.95LOK BAG-6130 ‘62 - ‘72 Chevy II/Nova Curved Brake/Clutch Pad w/Rubber - Brushed (pair) $86.95LOK XBAG-6130 ‘62 - ‘72 Chevy II/Nova Curved Brake/Clutch Pad w/Rubber - Black (pair) $85.95LOK BAG-6131 ‘62 - ‘67 Chevy II/Nova Throttle Curved Automatic Brake Pad w/Rubber - Brushed $56.95LOK XBAG-6131 ‘62 - ‘67 Chevy II/Nova Throttle Curved Automatic Brake Pad w/Rubber - Black $56.95LOK BAG-6142 ‘68 - ‘72 Nova Throttle Pedal Assembly w/Rubber - Brushed $139.95LOK XBAG-6142 ‘68 - ‘72 Nova Throttle Pedal Assembly w/Rubber - Black $152.95LOK BAG-6143 ‘68 - ‘72 Nova Curved Automatic Brake Pad w/Rubber - Brushed $56.95LOK XBAG-6143 ‘68 - ‘72 Nova Curved Automatic Brake Pad w/Rubber - Black $56.95

Lokar® - ‘62 - ‘74 Chevy II/Nova Throttle Assemblies & Brake Pads

‘64 - ‘75 Chevelle Billet Aluminum throttle assemblies and brake pads are a direct replacement. Throttle pedal assemblies eliminate factory rod linkage. Curved design adds a modern bend on classic brake and clutch pads. Add an “X” to front of Part Number for Black Anodized finish.Part # Details Price


INTERIOR

IN

LOK BAG-6128 ‘64 - ‘67 Chevelle Throttle Pedal Assembly - Brushed $152.95LOK BAG-6129 ‘64 - ‘67 Chevelle Throttle Pedal Assembly w/Rubber - Brushed $153.95LOK XBAG-6129 ‘64 - ‘67 Chevelle Throttle Pedal Assembly w/Rubber - Black $153.95LOK BAG-6132 ‘64 - ‘72 Chevelle Curved Brake/Clutch Pad w/Rubber - Brushed (pair) $86.95LOK XBAG-6132 ‘64 - ‘72 Chevelle Curved Brake/Clutch Pad w/Rubber - Black (pair) $85.95 LOK BAG-6135 ‘64 - ‘72 Chevelle Curved Automatic Brake Pad w/Rubber - Brushed $56.95LOK XBAG-6135 ‘64 - ‘72 Chevelle Curved Automatic Brake Pad w/Rubber - Black $56.95LOK BAG-6163 ‘64 - ‘75 Chevelle Curved E-Brake Pad w/Rubber $22.95LOK XBAG-6163 ‘64 - ‘75 Chevelle Curved E-Brake Pad w/Rubber - Black $22.95

Lokar® - ‘64 - ‘75 Chevelle Throttle Assemblies & Brake Pads




INTERIOR

IN

Racing Power Company© - “Barefoot” Style Pedals

Barefoot pedal covers add a nostalgia look to the interior of your ride -- Hang Ten!!Part # Details PriceRPC R8520 “Barefoot” Gas Pedal $13.95RPC R8521 “Barefoot” Dimmer Pad $6.95

Lokar® - Aluminum Throttle Pedal SpacersIs your throttle pedal buried in your carpet. Lokar has designed a two pedal spacers to eliminate that dilemma. One for the standard billet assemblies and one for chromed steel assemblies. The spacer mounts directly to the center of the pedal mounting bracket. Add an “X” to front of Part Number for Black Anodized finish.Part # Details PriceLOK GPS - 6014 Spacer for Billet Pedals $20.95LOK GPS - 6015 Spacer for Chrome Steel Pedals $20.95

Gennie Shifter© - Throttle Pedals

Chrome, Firewall mount with splined shaft.Part # Details PriceGSC 7003 Machined Aluminum Pad $94.95

Smart Parts© - Throttle Pedal / Brake PadContemporary/traditional styling, w/compact design to fit most toe boards. Floor mount provides under the floor cable installation. Complete with hardware for easy installation.Part # Details PriceSPC 2030 - P Throttle Pedal - Polished $105.95SPC 2030 - S Throttle Pedal - Satin $99.95SPC 2031 - P Clutch / Brake Pad - Polished $36.95SPC 2031 - S Clutch / Brake Pad - Satin $30.95

Racing Power Company© - Gas Pedals with Rubber Pads

Part # Details PriceRPC S9507 Firewall Mount - Polished Aluminum $32.95RPC R8504 Floor Mount - Chrome Aluminum $92.95

FIREWALL MOUNT

FLOOR MOUNT

Racing Power Company© - “Spoon” Throttle PedalPart # Details PriceRPC R9507 Spoon Style, Firewall Mount, Chrome Steel $32.95

Part # Details PriceATM 1101 5 Gauge Electric Set - 3 3/8” $628.56 / kitATM 1196 Tachometer, 8000 RPM, 3 3/8” $210.25 / ea

Auto Meter© - Cruiser Series Gauges

American Muscle gauges feature advanced hybrid dial technology combining Auto Meter’s signature white Hi-Def LED illumination and glowing red pointers for maximum readability. They have spun aluminum dials featuring embossed details for classic good looks and are finished with chrome super bezels. Includes all necessary senders.Part # Details Price

Clayton Machine Works brake & clutch assemblies are machined from forged aluminum. Fits Camaro, ‘68 and Up Nova, Chevelle and Firebird. Please call for other applications. Available for manual and automatic transmissions. Both Kits include all hardware needed for complete installation.Part # Details PriceCMW MCP-AUTO Brake & Clutch Assembly Kit - Automatic $479.00CMW MCP-MANUAL Brake & Clutch Assembly Kit - Manual $679.00

Clayton Machine Works© - Brake & Clutch Assemblies

Throttle assemblies feature a durable chrome plating, clean “inline” styling, drilled i-beam arms, fully adjustable, and spring loaded pedal. Brake pedals feature a durable chrome plating and a molded rubber pad.Part # Details PriceCMW TA-202 Throttle Assembly - Black $145.00CMW TA-204 Throttle Assembly - Chrome $145.00CMW BP-302 Brake Pedals - Black $40.00CMW BP-304 Brake Pedals - Chrome $40.00

Clayton Machine Works© - Throttle Assembly & Brake Pads

ATM 1202 5 Gauge Electric Set - 3 3/8” $628.56 / kitATM 1205 2 Gauge Electric Set - 5” Speedo/Tach Combo & Quad $785.70 / kitATM 1298 Tachometer, 8000 RPM, 3 3/8” $210.39 / ea

Auto Meter© - American Muscle Gauges

Auto Meter 5 Piece Gauge Kits120 MPH Speedometer (LED Odometer) is 3 3/8” in diameter. Fuel Level, Water Temp (100-240), Oil Pressure (0-100 PSI), and Volt Meter (8-18 Volts) gauges are 2 1/16” in diameter.Part # Details Price


INTERIOR

IN ATM 2000 Antique Ivory $699.99ATM 2001 Black Diamond $699.99

Auto Meter© - Prestige Gauges



Auto Meter© - Old Tyme White II Series Gauges

The face is white and black with a chrome bezel. These gauges feature high-intensity, through the dial, LED illumination & black pointers. The gauge sizes are 2 1/16”, 3 3/8”, and 5” diameter. The 5” 2 gauge set include fuel, oil, temp, and volts in one gauge and the speedo and tach in the other.Part # Details PriceATM 1203 Old Tyme White II 2 Gauge Kit - 5” $683.66 / kitATM 1200 Old Tyme White II Gauge Kit $525.50 / kit

Auto Meter© - Designer Back II Series Gauges

The face is black and white with a chrome bezel. Features high-intensity, through the dial, LED white illumination and red pointers. The gauge sizes are 2 1/16”, 3 3/8”, and 5” diameter. The 5” 2 gauge set includes fuel, oil, temp, and volts in one gauge and the speedo and tach in the other.Part # Details PriceATM 1204 Designer Black II 2 Gauge Kit - 5” $683.66ATM 1201 Designer Black II Gauge Kit - 3 3/8”, & 4 - 2 1/16” $525.50

Auto Meter© - MCX Series Gauges

The face is black and white with a chrome bezel and domed lens. The MCX series features white lighting and orange pointers. The gauge series are 2 1/16”, 3 3/8”, and 5” diameter. MCX 5” 2 gauge set include fuel, oil, temp, and volts in one gauge and the speedo tach in the other.Part # Details PriceATM 1103 MCX 2 Gauge Kit - 5” $683.66ATM 1102 MCX 5 Gauge Kit - 3 3/8” & 4 - 2 1/16” $525.50

Auto Meter© - Masterpiece Silver

Officially Licensed Ford Product. The Masterpiece Silver series features a white face and chrome embossed bezels. The gauge sizes are 3 1/8” and 2 1/16” diameter. The Masterpiece Silver series is available only in a kit. Individual gauges other than the tachometer are not sold separately.Part # Details PriceATM 880087 5 Gauge Electric Set - 3 1/8” $459.00ATM 880088 Tachometer, 8000 RPM, 3 1/8” $129.29

Auto Meter© - Chevy Vintage

Officially Licensed GM Product. The Chevy Vintage series features a white face, orange pointers, and chrome embossed bezels. The gauge sizes are 3 1/8” and 2 1/16” diameter. The Chevy Vintage series is available only in a kit. Individual gauges other than the tachometer are not sold separately.Part # Details PriceATM 1302-00408 5 Gauge Electric Set - 3 1/8” $459.00


INTERIOR

IN

Auto Meter - Street Rod Gauge KitsFive (5) gauge kits include speedometer, volt meter, fuel level gauge, electric water temp. and electric oil pressure gauge. Each kit comes complete with instructions, brass bushing kit and electric senders for fuel level, water temp. and oil pressure. Speedometer is 3 1/8” diameter, all small gauges are 2 1/16”. Many others available, please call for pricing.Part # Details Speedo Face Pointers Numbers Bezel PriceATM 1300 Artic White Mechanical White Red Black Chrome $259.95ATM 1302 Artic White Electric White Red Black Chrome $339.95ATM 1501 Golden Oldies Mechanical Beige Black Black Gold $299.95ATM 1502 Golden Oldies Electric Beige Black Black Gold $359.95ATM 1601 Old Tyme White Mechanical White Black Black Chrome $272.95ATM 1602 Old Tyme White Electric White Black Black Chrome $339.95ATM 1808 Antique Beige Mechanical Beige Black Black Chrome $279.95ATM 1809 Antique Beige Electric Beige Black Black Chrome $342.95ATM 1708 Old Tyme Black Mechanical Black White White Chrome $249.95ATM 1709 Old Tyme Black Electric Black White White Chrome $349.95ATM 1420 Designer Black Mechanical Black Orange White Chrome $259.95ATM 1421 Designer Black Electric Black Orange White Chrome $339.95ATM 1901 American Platinum Mechinal Silver Black Black Black $269.95ATM 1902 American Platinum Electric Silver Black Black Black $349.95

Auto Meter© - Gauges

ARCTIC WHITE

ANTIQUE BEIGE

OLD TYME WHITE

Autogauge tachs are 3 3/4” diameter. They have a pedestal mount and range from 0 to 8000 RPM.Part # Details PriceATM 2301 Black Face with Chrome Case $61.95ATM 2304 White Face with Chrome Case $61.95ATM 2309 Black Face, Shift-Lite, Black Case $132.95

Auto Meter© - Autogauge Tachometers

GOLDEN OLDIES

These 3 Gauge consoles feature 2 1/16” oil pressure, voltmeter and water temperature gauges mounted in an auxiliary panel.Part # Details PriceATM 2324 White Face Gauges - Black Panel $42.95ATM 2349 Black Face Gauges - Chrome Panel $44.95

Auto Meter© - Autogauge 3 Gauge Consoles


INTERIOR

IN

OLD TYME BLACK

DESIGNER BLACK

AMERICAN PLATINUM



Auto Meter© - Gauge Mounting Panels

Black aluminum panels with 2 1/16” gauge holes. Gauges not included.Part # Details PriceATM 2236 1 Gauge Panel $13.95ATM 2237 2 Gauge Panel $14.95ATM 2238 3 Gauge Panel $16.95

Auto Meter©

Old Dog also carries a LARGE SELECTION of individual gauges, gauge senders, accessories, and replacement parts.

Please call an Old Dog representative for more information.

VDO™ - Cockpit GaugesVDO Gauge KitsAll VDO gauge kits include electric programmable speedometer with resettable LCD trip odometer, volt meter, fuel level gauge, electric water temp, and electric oil pressure gauge. Each kit comes complete with instructions, and electric senders for speedometer, fuel level, water temp. and oil pressure. Small gauges are 2 1/16” in diameter.Part # Details Speedo Face Pointers Numbers Bezel PriceVDO 600-922 Cockpit White 3/38” White Red Black Black $304.95VDO 600-923 Cockpit 3 1/8” Black Red White Black $304.95VDO 600-924 Cockpit 3/38” Black Red White Black $304.95VDO 600-926 Cockpit Royale 3 1/8” White Black Black Chrome $304.95VDO 600-927 Cockpit Royale 3/38” White Black Black Chrome $304.95

COCKPIT ROYALE

COCKPIT

Auto Meter© - 16 Pulse Speedometer Sender

ATM 5291 GM Style Plug-In $77.95ATM 5292 Ford Plug-In $83.95

Part # Details PriceATM5291

ATM5292

Auto Meter© - Universal Fuel Sending Unit

If you’ve replaced your fuel tank with one that does not have a sending unit installed, these Auto Meter universal fuel level sending units are for you.Part # Details PriceATM 3262 Fuel Level Sender (240-33 Ohm) $33.95


INTERIOR

IN

VDO temperature senders are matched to their gauges for accurate and reliable readings every time. All senders are rated at 250 degrees with a 90 degree sweep. Kit includes: Sender Thread Size: 1/8-27 NPT Thread Adapter Sizes Included: 1/4-18 NPT, 3/8-18 NPT, 1/2-14 NPTPart # Details Price

VDO™ - Heritage ChromeHeritage Chrome ushers in the era of Spats and Zoot Suits! Black pointers and antique font offsets the parchment colored dials and polished chrome bezels for that distinctive look found on early american cars. Each dial has modern VDO movements and technology.Part # Details Price

VDO™ - Series 1Brilliant stepped chrome bezel, white pointer, and white graphics. Traditional robust metal housing and stud-type connectors complete the ‘retro-look’.Part # Details PriceVDO 600-9256 6 Gauge Kit - Ford Trans Sender, 3 3/8” Speedo, & Tach $415.95VDO 600-925 5 Gauge Kit - GM Trans Sender & 3 3/8” Speedo $304.95

VDO™ - Vision Silverstone

Vision Silverstone feature stunning silver dials and matching plated bezels, clear white graphics and red pointers. VDO patented movements provide smooth and accurate performance and long life dependability.Part # Details PriceVDO 600-9006 6 Gauge Kit - GM Trans Sender, 3 3/8” Speedo, & Tach $409.95VDO 600-9001 5 Gauge Kit - Ford Trans Sender & 3 3/8” Speedo $409.95

VDO A2C59519572 5 Gauge Kit - GM Trans Sender & 3 3/8” Speedo $459.95VDO A2C53402384-S 7000 RPM Tachometer - 3 3/8” $118.95

VDO™ - Vision ChromeVision Chrome features crisp black dials and polished chrome bezels. High contrast clear white graphics and red pointers make Vision instruments easy to read. Included light diffusers allow the dial illumination color to be changed to red or green.Part # Details PriceVDO 600-992 6 Gauge Kit - GM Trans Sender & 4” Speedo $378.95


INTERIOR

IN

VDO 323-900 Kit w/Sender & Adapter Fittings (pictured) $25.95VDO 323-419 Sender Only - 1/2” - 14 NPT Thread $15.95VDO 323-421 Sender Only - 3/8” - 18 NPT Thread $19.95

VDO™ - Temperature Senders



VDO™ - Oil Pressure SendersSince different manufacturers use different ohm ranges on their gauges and senders, why not purchase the corresponding VDO pressure sender for your VDO gauge. All senders are rated at 80 PSI with a 90 degree sweep.Kit Includes: Sending Unit Thread Size: 1/8-27 NPTThread Adapter Sizes Included: 1/4-18 NPT, 3/8-18 NPT, 1/2-14 NPTPart # Details PriceVDO 360-900 Kit with Sender & Adapter Fittings (pictured) $36.95VDO 360-003 Sender Only - 1/8” - 27 NPT Thread $29.95VDO 360-005 Sender Only - 1/4” - 18 NPT Thread $32.95

VDO™ - Fuel Gauge Sender

VDO 226-001 Fuel Gauge Sender $34.95

Fuel Tank Sender 10-180 Ohms w/Installation Kit w/o Flange.Part # Details Price

VDO™ - 16 Pulse Speedometer Generator

VDO 340-011 GM 7/8 - 18 Thread $84.95VDO 340-012 GM Cruise Control “Through Drive” $89.95VDO 340-013 Ford Plug-In Type $92.95


VDO340011DVDO340013D

VDO™ - Gauge Panels

VDO 240-035 Two Gauge Panel $11.95VDO 240-036 Three Gauge Panel $14.95

Universal chrome steel under dash gauge panels with 2 1/16” holes.Part # Details Price

VDO™ - Ford Flange Kit

VDO 226-902 Ford Flange Kit $56.95

For mounting fuel tank sender to 1935-56 Ford, OEM bolt pattern.Part # Details Price

Mooneyes® - Moon Gauges

MOO MPG35005 Black with Electric Speedometer $446.00MOO MPG35005WH White with Electric Speedometer $446.00

Five gauge set includes a 3 3/8” diameter 140 MPH electric Speedometer, and 2 1/16” diameter electric gauges, for Oil Pressure, Fuel Level, Water Temperature, and Volt. Kit includes sender units for Water Temperature, Oil Pressure and Fuel Level.Part # Details Price


INTERIOR

IN

The 1957 Chevy’s original dash has a unique threepod gauge cluster. This ‘57 gauge directly bolts in the Chevy allowing the benefits of modern instrumentation. Includes 140 MPH Speedometer, 8000 RPM Tachometer, fuel, oil psi, water temp, and volt gauges. Includes an electronic programmable Speedometer and all electronic gauges, all necessary sending units with fuel gauge compatible to the stock sender, also available with a new fuel sending unit. Custom made brackets allow the gauges to mount into your stock openings with appropriate screws. The High beam indicator is mounted inside the speedometer unit. Optional custom features include: curved lens, custom color or fonts, and pointer. Three-year warranty.Part # Details Price

MOO MPG5000TM 8000 RPM Tachometer $79.95

1955-56 Chevy BelAir Instrument Cluster BelEraTM

Direct bolt into stock or aftermarket 55/56 bezel. Includes new glass lens, Set up to work with stock fuel sender (0-30 ohm), 140 MPH Speedometer, and 8,000 RPM tachometer. Sending units included in each kit, easy plug & play set up with Classic “Smart Box” Detailed instruction manual for easy installation and 5 year warranty.OPTIONS:Gear indicator is available as 3 Speed Auto or Overdrive, Pointers are available in any color, Standard Dials come in the following colors:• White Dial with Black Font• Black Dial with White Font• Tan Dial with Brown Font• Grey Dial with White Font• White Dial with Black Font and Silver Centers around Gauges• and a Black Dial with White Font and Silver Centers around Gauges• Custom Faces can be designed and manufacturedPart # Details PriceCII BE01B-GM Black Face with Silver Centers - White Pointers $745.00CII BE01BB-GM Black Face - White Pointers $745.00CII BE01W-GM White Face with Silver Centers - Black Pointers $745.00CII BE01WW-GM White Face - Black Pointers $745.00

Classic Instruments© - ‘55 & ‘56 Chevy BelEra™ Gauges


INTERIOR

IN

8000 RPM Half sweep electronic tachometer for 4, 6, or 8 cylinder engines. Easily installs on dash or column. Flange diameter is 3 3/4”. Black face only.Part # Details Price

Mooneyes® - Moon Logo Tachometer


CII CH01B-SLF Black Face - White Pointers $745.00CII CH01W-SLF White Face - Black Pointers $745.00CII CH01T-SLF Tan Face - Red Pointers $745.00CII CH01G-SLF Gray Face - Red Pointers $745.00

Classic Instruments© - ‘57 Chevrolet


Classic Instruments© - Gauges

VINTAGE

CLASSIC WHITE

VINTAGE

CLASSIC WHITE

SG

HOT ROD

Kits include electric programmable speedometer, volt meter, fuel level gauge, electric water temp & electric oil pressure gauge. Comes w/instructions, pulse generator, brass bushing kit & electric senders for fuel level, water temp & oil pressure. Equipped & priced for standard GM applications. Please specify if you are using an engine or transmission other than GM. Additional gauges avaliable for matching tachs, clocks, amp meter, oil temp, trans temp & gear selection gauges.

CII HR00SLF-GM 3 3/8” Speedo, 4 Individual 2 1/8” Gauges, $423.00 Stainless Bezels, Flat GlassCII HR02SLF 3 3/8” Speedo, 3 3/8” Quad Cluster, Stainless $389.00 Bezels, Flat GlassCII HR52SLF 4 3/4” Speedo, 4 3/4” Quad Cluster, Stainless $459.00 Bezels, Flat Glass

Hot Rod SeriesDesigned as a tribute to the early days of street rodding. Gauges have black face, white needle, white numbers, stainless bezel and convex lens.Part # Details Price

CII CW00SLF 3 3/8” Speedo, 4 Individual 2 1/8” Gauges, $415.00 Stainless Bezels, Flat GlassCII CW02SLC 3 3/8” Speedo, 3 3/8” Quad Cluster, Stainless $459.00 Bezels, Curved Glass

Classic White SeriesA favorite design that captures that elusive “Continental” flair of the ‘20’s. Features white face with black pointer and black numbers.Part # Details Price

CII VT00GLC 3 3/8” Speedo, 4 Individual 2 1/8” Gauges, $455.00 Gold Bezels, Curved GlassCII VT00GLF 3 3/8” Speedo, 4 Individual 2 1/8” Gauges, $436.00 Gold Bezels, Flat GlassCII VT02SLF 3 3/8” Speedo, 3 3/8” Quad Cluster, Stainless $385.00 Bezels, Flat GlassCII VT04SLF 3 3/8” Speedo, Two 3 3/8” Dual Clusters, $420.0 Stainless Bezels, Flat Glass0CII VT52SLF-GM 4 3/4” Speedo, 4 3/4” Quad Cluster, Stainless $466.00 Bezels, Flat Glass

Vintage SeriesThe design that achieves that special look of nostalgic 1930’s motoring. Features tan face with red pointer and light brown numbers.Part # Details Price

CII SG01SLF 3 3/8” Speedo, Tach, 4 Individual 2 1/8” $500.00 Gauges, Stainless Bezels, Flat GlassCII SG52SLF 4 5/8” Speedo, 4 5/8” Quad, Stainless Bezels, $472.00 Flat GlassCII SG54SLF 4 5/8” Speedo, 4 Individual 2 1/8” Gauges, $462.00 Stainless Bezels, Flat Glass

SG SeriesThe SG Series features a popular gray face, white pointer design and a clean graphic layout.Part # Details Price


INTERIOR

IN

CII TF01T Tach-Force Tan $838.00CII TF01W Tach-Force White $838.00

Classic Instruments lends its style and quality to the ‘55 - ‘59 Chevrolet Task-Force Pickups, Suburbans & Panel Trucks. Classic’s newest offering is a complete retrofit unit, incorporating a tachometer and LED lighting, while retaining an original look. The Tach-ForceTM features a dual layer design, 12-volt electronic movements, and push button calibration.Part # Details Price

Classic Instruments© - Task-Force Gauges

CII AW00SRC 5 Gauge Set (3 3/8” Speedo, 2 1/8” Fuel, Oil, Temp, Volts) $520.00CII AW01SRC 6 Gauge Set (3 3/8” Speedo & Tach, 2 1/8” Fuel, Oil, Temp, Volts) $629.00CII AW02SRC 2 Gauge Set (3 3/8” Speedo & Quad) $486.00

All American Wing SeriesThis new series incorporates the unique look of spun metal into a graceful “All American Wings” series. The instrumentation is delicately hand crafted with a raised “AAW” logo. This design features curved glass with black letters and pointer on a spun metal face. Each set has an electric speedometer, tach, volt meter, fuel level gauge, electric water temp. and electric oil pressure gauge. The kit comes complete with instructions, pulse generator, tach filter, brass bushing kit and electric senders for fuel level, water temp. oil pressure.Part # Details Price

CII BRKTGMC 4 pc. Kit to Mount Classic 5” Quad (4 3/4”) Gauges $16.00 into ‘47 - ‘53 GM Pickup Dash

Quad Gauge Mounting BracketsPart # Details Price

CII AN00SHC 5 Gauge Set ( 3 3/8” Speedo, 2 1/8” Fuel, Oil, Temp, Volts) $520.00CII AN01SHC 6 Gauge Set ( 3 3/8” Speedo & Tach, 2 1/8” Fuel, Oil, Temp, Volts) $630.00CII AN03SHC 3 Gauge Set ( 3 3/8” Speedo, Tach, & Quad) $596.00

All American Nickel™The All American Nickel™ series displays a nickel appearance with the elegant styling of the instrumentation within the All American™ lines. This new series incorporates numerous design techniques that create a dramatic dimensional look to the instrumentation.Part # Details Price

CII AT00SHC 5 Gauge Set ( 3 3/8” Speedo, 2 1/8” Fuel, Oil, Temp, Volts) $520.00CII AT01SHC 6 Gauge Set ( 3 3/8” Speedo & Tach, 2 1/8” Fuel, Oil, Temp, Volts) $629.00CII AT03SHC 3 Gauge Set ( 3 3/8” Speedo, Tach, & Quad) $593.00


INTERIOR

IN

All American Tradition™The All American Tradition™ series is offered standard with polished stainless high stepped bezels & curved glass, the white teardrop pointers & elegant “All American” emblems complete this masterpiece. The face of this instrument features a spun central point with a black background which allows the polished aluminum numbers & indices to radiate off the face.Part # Details Price

Classic Instruments© - All American Series



Classic Instruments© - V8 Speedster Series Gauges

CII V8SR00SHC 5 Gauge Set $685.00CII V8SR01SHC 6 Gauge Set $795.00

Five and six gauge set includes a 3 3/8” diameter 140 MPH electric Speedometer, and 2 1/16” diameter electric gauges, for Oil Pressure, Fuel Level, Water Temperature, and Volt. Kit includes sender units for Water Temperature, Oil Pressure and Fuel Level. Gauges feature a black face, curved glass, chrome needle, white lettering and a stainless high step bezel. Part # Details Price

New Vintage© - Woodward Series Gauges

Woodward Series 4 3/8” 3-1 KitThe same great looks of the Woodward Series, in a balanced, attractive package. Turn signals, high-beam and warning lamps incorporated into the gauges.Part # Details Price

These period look instruments have the great styling features you have come to expect from New Vintage. The exclusive inner accent ring is on every set, others simply print silver on the dial, they took the time to add a real plated part to match the stainless bezel. The bold, wraparound deco styled graphics stand out without looking out of place. A domed glass lens caps off the look in a luxurious manner. The programmable speedometers are easy to program, hit the button, drive a mile, hit it again, you’re done! Works with any speedometer sender aftermarket or stock. With or without the exclusive cover bezel, these sets have the right look, performance you expect and the right price, all with a limited lifetime warranty. All mounting hardware and senders included.

NEW 37254-02 Woodward 3-1 Kit - Beige $499.95NEW 37254-01 Woodward 3-1 Kit - Black $499.95NEW 37254-03 Woodward 3-1 Kit - White $499.95

5 & 6 Gauge SetsDesigned fit most standard dash panels with a 3-3/8” speedometer and tach (6 gauge set) with 2-1/16” fuel level, oil pressure, water temperature and gasoline level gauges. Pressure, temperature, fuel level and a GM speedometer sender along with mounting hardware, sender bushings wiring harnesses and internal lighting are included.Part # Details PriceNEW 37604-01 Black Kit $532.79NEW 37504-01 Black 5 Gauge Kit $439.00NEW 37604-02 Beige 6 Gauge Kit $532.75NEW 37504-02 Beige 5 Gauge Kit $439.00

Woodward Series 4 3/8” Quad Gauge and Speedometer KitsProgrammable speedometer, quad gauge and installation kit.Part # Details PriceNEW 37205-02 Woodward Series Kit - Beige $389.00NEW 37205-01 Woodward Series Kit - Black $389.00Woodward Series 3 3/8” Quad Gauge and Speedometer KitsProgrammable speedometer, quad gauge and installation kit. Same as original Woodward series but in a more compact package.Part # Details PriceNEW 37204-02 Beige Kit $499.95NEW 37204-01 Black Kit $379.00


INTERIOR

IN

4 3/8” 3-1 KIT

4 3/8” QUAD & SPEDDOMETER

3 3/8” QUAD & SPEEDOMETER

6 GAUGE - 3 3/8 SPEEDOMETER


INTERIOR

IN

New Vintage© - 1935 Big ‘N Little Series Gauges


Dakota Digital – VFD3 Digital & VHX Series Analog Instrument Systems: The VFD3 Digital & VHX Series of Analog Instrument Systems from Dakota Digital will modernize your ride with the latest technology & styling. The VFD3 Series features either Blue or Teal high contrast display options, built around a microprocessor based control module for consolidated wiring. The new VHX Series boasts fully lit needles, backlit faces & highly visible LCD message centers for the ultimate in flexibility. Both styles include solid state sensors for unparalleled accuracy & user-customizable display feedback. Manufactured in Sioux Falls, SD, all instrument packages carry a limited lifetime warranty! Please call to discuss options available for your vehicle.

Dakota Digital© - Digital Gauge Systems

1935 Series Big ‘N Little 3 Gauge KitsThe 4 3/8” programmable speedometer and the exclusive 3-3/8” combination gauges bring authentic 1930s styling to your ride with class. Kit includes 4 3/8” speedometer, 2 each 3-3/8” combination gauges, fuel level, oil pressure & water temperature sender, sender bushings, mounting hardware & wiring harnesses.Part # Details Price

Quad/Tach/Speedo3 3/8” Programmable speedometer, 4 3/8” tachometer and 3 3/8” quad gauge.

NEW 37333-01 Black Kit $499.00NEW 37333-02 Beige Kit $499.00

The original 1935 SeriesTwo 3 3/8” combination gauges and one 4-3/8” speedometer.

NEW 37331-02 Beige Kit $499.00NEW 37331-01 Black Kit $499.00Quad/Speedo/Tach3 3/8” Tach, 4 3/8” programmable speedometer and exclusive 3 3/8” quad gauge.


Speedo/Quad/TachFeatures 3 3/8” programmable speedometer, 4 3/8” quad gauge and 3 3/8” tachometer.

NEW 37334-01 Black Kit $499.00NEW 37334-02 Beige Kit $499.001935 Series 3 3/8” Gauge KitsChoose the sizes and combinations by kit to create the look you want. All sets include our programmable speedometer, fuel level, oil pressure , temperature and a GM style speedometer sender. Mounting hardware, gauge wiring harnesses, sender bushings & external momentary switch are provided.Part # Details Price1935 Series 2Kit includes 3-3/8” speedometer, 2 each 3-3/8” combination gauges.

NEW 37335-02 Beige Kit $499.00NEW 37335-01 Black Kit $499.00Quad/Speedo/TachProgrammable speedometer, tach and quad gauge, all in a 3 3/8” size


Billet Specialties™ - Universal DashesDesigned for use with Autometer, Classic Instruments, and VDO gauges. Dash panels are machined from billet aluminum and polished to a mirror finish. The universal design allows the dash panel to be mounted with machined ribs on the top or bottom.Part # Details Price

BIL 36520 3 1/8” Center Trim Style $69.95BIL 36525 3 3/8” Center Trim Style $69.95

5 Gauge Panels

BIL 36530 3 1/8” Center Trim Style $79.95BIL 36535 3 3/8” Center Trim Style $79.95

6 Gauge Panels

Lokar® - Speedometer CablesLokar Speedometer Cables are designed to work with any cable driven aftermarket gauges or factory gauges with a 5/8”-18 male thread at the speedometer. Cables are 7’ long and are designed to be cut-to-fit.Chevy: TH-350, TH-400, 700-R4, PG, TH-200, 200-4R, & 4L60Chrysler: 727 & 904Part # Details PriceLOK SP-1500U Black Speedometer Housing $77.95LOK SP-1501HT Hi-Tech SS Speedometer Housing $123.95

LOK SP-1502U Ford - Black Speedometer Housing $77.95LOK SP-1503HT Ford - Hi-Tech SS Speedometer Housing $123.95

Ford: C-4, C-6, AOD, and FMXPart # Details Price


Billet Specialties™ - Chevy Dash Panels

BIL 35220 ‘34 - ‘35 Chevy - 3 1/8” Gauge Diameter $89.95BIL 35320 ‘37 - ‘38 Chevy - 3 1/8” Gauge Diameter $89.95


Billet Specialties™ - Ford Dash Panels

Part # Details PriceBIL 35020 1932 Ford - 3 1/8” Gauge Diameter $89.95BIL 35120 ‘33 - ‘34 Ford - 3 1/8” Gauge Diameter $89.95

BIL35220

BIL35320

BIL35020

BIL35120


INTERIOR

IN

100% steel allows easy gauge installation without grounding kits required for fiberglass dash. Part # Details Price

IN

BOE12003

For Autometer Gauges 3 1/8” & 2 1/16”.Part # Details PriceBOE 12003 ‘47 - ‘53 Chevy Truck Billet Aluminum Dash Insert $145.00BOE 13003 ‘55 - ‘59 Chevy Truck Billet Aluminum Dash Insert $99.95BOE 20203 ‘35 - ‘37 Ford Truck Billet Aluminum Dash Insert $109.95BOE 34003 ‘53 - ‘54 Chevy Car Billet Aluminum Dash Insert $109.95BOE 41003 ‘32 Ford Car Billet Aluminum Dash Insert $109.95BOE 43003 ‘39 - ‘40 Ford Car Billet Aluminum Dash Insert $99.95BOE 43005 ‘40 - ‘47 Ford Truck Billet Aluminum Dash Insert $99.95BOE 92161 Universal 6 Gauge Dash Insert $79.95For VDO Gauges 3 3/8” & 2 1/16”.Part # Details Price

BOE92163

BOE43003

BOE41003BOE34003

BOE35005

BOE43005

Boese Engineering© - Billet Aluminum Dash Inserts

BOE12506

BOE12006

BOE31505BOE31001

BOE13003

BOE 22000 ‘51 - ‘52 Ford Truck Billet Aluminum Dash Insert $145.00BOE 31001 ‘37 - ‘38 Chevy Car Billet Aluminum Dash Insert $109.95For 3 3/8” Quads.Part # Details PriceBOE 31505 ‘39 Chevy Car Billet Aluminum Dash Insert $99.95BOE 35005 ‘55 - ‘56 Chevy Car Billet Aluminum Dash Insert $99.95BOE 43003 ‘39 - ‘40 Ford Car Billet Aluminum Dash Insert $99.95BOE 43005 ‘40 - ‘47 Ford Truck Billet Aluminum Dash Insert $99.95


INTERIOR

For 5” Quads (Autometer and Classic Instruments).Part # Details PriceBOE 12006 ‘47 - ‘53 Chevy Truck Billet Aluminum Dash Insert $99.95BOE 12506 ‘54 - ‘55 Chevy Truck Billet Aluminum Dash Insert $109.95BOE 22005 ‘51 - ‘52 Ford Truck Billet Aluminum Dash Insert $109.95


EMS 48 1935 - 36 Ford Dash $275.00DSM FD199 1937 - 40 Ford Dash $285.00DSM FD200 1937 - 40 Ford Lower Switch Panel $41.00

Smooth Dash Panels


Scutchfield Metal Shaping© - Under Dash Panel

Custom lower dash panels fabricated to follow the contour of the factory dash.Part # Details PriceSMS 027-32 ‘32 Ford Stock Width $229.95SMS 027-31 ‘32 Ford Wide Panel $229.95SMS 027-33 ‘31 - ‘32 Chevy $229.95SMS 027-34 ‘33 - ‘34 Ford $229.95SMS 027-35 ‘33 - ‘34 Chevy $229.95SMS 027-36 ‘36 Ford $229.95SMS 027-39 ‘38 - ‘39 Ford $229.95SMS 027-00 Universal 3” x 47” (Flat with Rolled Edge) $145.00

‘31-’32 CHEVY ‘32 FORD ‘33-’34 FORD ‘36 FORD

‘38-’39 FORD

Bob Drake© - 1940 Ford Dash

BDR 01A-304-C 1940 Ford Dash with A/C Vents $560.00BDR 01A-303 1940 Ford Dash without A/C Vents & filled ashtray holes. $485.00

Same all-steel quality as the original, plus Bob Drake’s 2” Air Conditioning Nozzles in the original ashtray locations. Features chrome bezels & chrome adjustable ball outlets. Nozzels fit into standard 2” automotive ducting. Universal.Part # Details Price

Valley Auto Accessories© - Overhead Consoles

Fully machined aluminum console complete with mounting bracket, cut out for radio or CD. Opening size is 2 3/32” H by 7 11/64” W. Also comes with a dome light. Smooth design and fully radiused edges for ease of installation and appearance of your unit. Easy to install with formed steel bracket which can be attached to top bows. Brushed finish.Part # Details PriceSPL VOC 5400 Early Vehicles w/a Flat Roof & Flat Area Above Windshield $245.00SPL VOC 5400C Later Vehicles w/a Curved Roof $260.00

VOC5400

VOC5400C


INTERIOR

IN


Secretaudio SST is a hidden audio system that offers great flexibility for mounting in any type of vehicle. A 10ft cord from the Tuner/Amp plugs into a LCD display. The system can be operated from up to 40 feet away with the included RF (radio frequency remote.) Included with the system is a flush mount bezel for console or dash mounting. The small dimensions of the flush mount system allow you to install the LCD display almost anywhere. The LCD also comes with a bracket mount for easy installation in the glove box, under the dash, in the ashtray, sun visor, console, or wherever you choose. Since its only 1” deep its especially handy for custom or streetrod applications where there may be wiring or ducting routed behind the panels you wish to utilize for mounting. When your installation is finished you’ll be rewarded with a quality professionally installed look.Part # Details Price

For the best AM/FM reception nothing works better than a 31” vertically mounted antenna mast. Recognizing that application is impossible on some vehicles, our improved amplified antenna is the next best thing. Mounts on inside top of windshield for best performance. Note: Do not install under a metal dash as radio signals cannot penetrate metal. Requires 12 volts.Part # Details Price

Custom Autosound designed and manufactured these speakers specifically for ‘under seat’ or horizontal ‘wall’ installations. ‘Could be used on large ‘parcel shelves’ - wherever! Undercover 1 has one 5 1/2” woofer and one piezo tweeter in each enclosure. 120 Watt capa city. Undercover 2 has one 8” woofer and two piezo tweeters in each box. 200 Watt capacity. Under seat fit for most pre ‘78 cars and trucks. If you’ve got the space we have the solution! Sold in pairs.Part # Details Price

Smart Parts© - Speaker Pod with Map Pocket

Fiberglass Speaker PodPart # Details PriceSPC 3070 6 1/2” Maximum Speaker Grill Size (16” W x 7 1/2” T x 2 1/2” D) $123.95


INTERIOR

IN

CAS UNDERCOVER 1 Speakers (3” H x 8 1/4” W x 11 1/4” L) $119.95 pairCAS UNDERCOVER 2 Upgraded Speakers (3” H x 11” W x 12 1/2” L) $139.95 pair

Custom Autosound® - UNDERCOVER Speaker Enclosures


CAS ANTUV-HIDEAWAY Hide Away Antenna $29.95

Custom Autosound® - Hide Away Antenna

CAS SST Super Secretaudio AM / FM Radio $299.95CAS SSTPK Super Secretaudio AM / FM Radio w/CD Package $529.00

Custom Autosound® - Secretaudio® System



Rod Doors

RodDoors offers cool door panels, headliners and interior accessories for the do-it yourself rod builder. RodDoors’ door panels are made from tough, durable ABS plastic, come ready to be covered with your material and are easily installed. No clips or screws are needed.

• Panels are 44” wide by 32” tall with your choice of a 23”, 30”, or 36” minimum trim width centered in each panel. • No sewing: all models are designed so material (even vinyl) flows neatly into the design. • No Screws, Clips or holes to drill: 3M DuallocTM glue fastening system allows each panel to be quickly installed by just pressing the panels in place. They can be removed and reinstalled easily if necessary. • Complete Kit: includes panels for driver and passenger doors, Dualloc installation tape, edge tape, clips, tabs and a detailed instruction manual.. You supply the fabric. • Waterproof: will not crumble like cardboard or warp like plywood. • ABS Plastic: this tough, durable material is .125” thick and is easily customized. It can be glued, screwed, foamed, carved, or layered.

Interior Accessories available from RodDoors include: • Headliners for trucks • Rear Cab Covers • Modular Arm Rests • Map Pockets • Under Dash Covers • Steering Column Covers • Under Dash Extensions • Speaker Pods • Center Console

Please call with information so we can select the right application for your car.

Billet Specialties™ - Grab Handles

Everything you see is machined from 6061-T6 billet aluminum and polished to a mirror finish – a difference in quality you can see from a mile away. Replace your factory grab handle with our stylish billet aluminum grab handle. Works in ’94-’03 S-Series trucks, ’95-’03 S-Series Blazer® and ’88- ’03 full size Chevy™ trucks.Part # Details PriceBIL 271020 Billet Grab Handle $51.95


INTERIOR

IN

Fiberglass Interior Arm Rest for Hot Rods, Customs and Trucks.Part # Details Price

3050 3051 3052 3053

3054 3055 3056 3057

3058

3059


INTERIOR

IN

3065

3062


Trique banjo handles are made from quality billet aluminum and are polished to a high luster finish. Magnetic cover hides mounting screws. Art deco at its finest. Also available in black anodized finish.Part # Details PriceTRI DL05 Polished Banjo Door Lever $129.95 pairTRI DL05B Black Banjo Door Lever $129.95 pairTRI VWL05 Polished Vent Window Crank $129.95 pairTRI VWL05B Black Vent Window Crank $129.95 pairTRI WL05 Polished Window Crank $129.95 pairTRI WL05B Black Window Crank $129.95 pair

Trique© - Banjo Handles

3060

SPC 3050 Roadster Front Section (7” W x 4” T x 2 3/8” D) Roadster Rear Section (17 1/2” W x 4” T x 2 3/8” D) $134.95SPC 3051 Hot Rod (17 1/2” W x 4” T x 2 3/8” D) $94.95SPC 3052 Shorty (15 1/2” W x 3 1/2” T x 2 3/8” D) $94.95SPC 3053 Coupe (24 3/4” W x 5 1/2” T x 2 3/8” D) $94.95SPC 3054 Classic (11 3/4” W x 3 1/2” T x 2 3/8” D) $94.95SPC 3055 Tri-5 (19” W x 4 1/2” T x 2 3/8” D) $94.95SPC 3056 Slick (24” W x 4 1/2” T) $101.95SPC 3057 Slick II (24” W x 4 1/2” T) $123.95SPC 3058 Grabber (25” W x 4 3/4” T) $147.95SPC 3059 Boattail (20” W x 4” T) $101.95SPC 3060 Sixty’s ( 24” W x 4” T) $101.95SPC 3062 Un-Named (12” W x 4” T) $94.95SPC 3065 Tri 5 Mini (13 3/4” W x 4” T) $94.95

Smart Parts© - Arm Rests


Billet Specialties™ - Traditional Window & Door Cranks

Fully adjustable and easy to use: mount the spline on the regulator, slide on the aluminum cover, align the arm, tighten and snap on the dome cover. Available in polished finish only and sold in pairs. NOTE: Up to ’48 Ford use 3/8” square spline. Up to ’48 GM uses 7/16” round spline. ’49 and up Ford and GM use 1/2” round spline.

BIL 45320 Ford to ‘48 $74.95BIL 45420 GM to ‘48 $74.95BIL 45520 GM / Ford to ‘49 and Up $74.95

Billet Door HandlesPart # Details Price


Billet Window CranksPart # Details Price


Billet Vent Window CranksPart # Details Price

Billet Specialties™ - Ball Milled Window & Door Cranks

Ball milled handles feature an aggressive design for a high-tech look and an award winning polished or black anodized finish. Sold in pairs. Installs in minutes, Precision machined from 6061-T6 billet aluminum, Industry leading mirror finish polish, Steel splines & two set screws ensure secure installation.








INTERIOR

IN

CNC 3-D machined from billet aluminum for both strength and style, the Rail door handles and window ranks add a touch of style to any interior. Sold in pairs. Installs in minutes, Precision machined from 6061-T6 billet aluminum, Industry leading mirror finish polish, Steel splines & two set screws ensure secure installation.

Flush mount interior door handles made of 6061-T6 Billet Aluminum. Available in either machine finish or polished. Complete with mounting hardware, instructions, and templates. Includes five feet of super-flex cable that allows for tight bends and curves. Handles can be mounted in any location. Allows for easy disassembly for polishing, plating or paintingPart # Finish Size Price

Great styling in a durable chrome plated finish. Includes carbon-fiber look, brushed aluminum and black bezel inserts. 4.5” W x 2” H.Part # Details PriceCMW EL-502FG Ball End Handle $175.00CMW EL-503FG Open Ellipse Handle $175.00CMW EL-504FG Ribbed Handle $175.00

Clayton Machine Works© - Elliptical Door Handle

Drilled I-Beam styling. Inserts can be painted or upholstered. Durable chrome plating. Carbon fiber insert included. Fits GM, Ford, and Chrysler.Part # Details Price


INTERIOR

IN

CMW PT-102 Door Handle $85.00 / pairCMW PT-103 Window Crank $85.00 / pairCMW PT-104 Vent Crank $85.00 / pair

Clayton Machine Works© - Window and Door Cranks


SPC 2001P Large Polished Finish (5 5/8” x 2 7/8”) $200.95SPC 2001S Large Machined Finish (5 5/8” x 2 7/8”) $178.95SPC 2002P Small Polished Finish (4 3/4” x 2 3/8”) $200.95SPC 2002S Small Machined Finish (4 3/4” x 2 3/8”) $178.95

Smart Parts© - Interior Door Handles







Billet Specialties™ - Rail Window & Door Cranks


Lokar® - Billet Crescent Arm Rest Door Pulls

Two screw installation, deep pocket – four finger width door pull with recessed mounting.Part # Details PriceLOK IDP-2002 Billet Crescent Oval - Brushed (pair) $122.95LOK IDP-2003 Billet Crescent Oval - Polished (pair) $122.95

Lokar® - Billet Oval Arm Rest Door Pulls

Two screw installation, deep pocket – four finger width door pull with recessed mounting.Part # Details PriceLOK IDP-2004 Billet Oval - Brushed (pair) $122.95LOK IDP-2005 Billet Oval - Polished (pair) $122.95

Rocky Hinge© - Interior Door Handles

Made from billet aluminum with a polished finish, door handle kit is easy to mount and works on original or bear claw latches, Sold in pairs, our handles come complete with left & right door handles, 4 ft. adjustable cables, all mounting hardware, mounting template & instructions. Part # Details PriceRHI IDHBM01A Polished Ball Mill Inside Door Handles $139.95 pairRHI IDHP01 Small Polished Inside Door Handles $139.95 pair

Lokar® - Oval Billet Interior Door Handles

Recessed mounting design, complete with mounting back plate and hardware.Part # Details PriceLOK IDH-2000 Billet Oval - Brushed $183.95LOK IDH-2001 Billet Oval - Polished $184.95

Machined from billet aluminum.Part # Details PriceBIL 45910 Door Lock Knob - Smooth Top (pair) $20.95BIL 45930 Door Lock Knob - Tri-Five Smooth (pair) $20.95

Billet Specialties™ - Door Lock Knobs


INTERIOR

IN

Machined billet aluminum handle assembly for both hood and trunk. The cables are designed for cut-to-fit assembly. Hood release kit includes: aluminum firewall fittings and cable stop, the outer housing is 18” inside the vehicle and 6’ under the hood. The inner wire is 9’ long. Trunk release kit includes: cable stops and 15’ of outer housing and 16’ of inner wire.Part # Details Price

These aluminum trim strips can be easily shaped to any contour to add style to door panels, dashes, etc. Trim is 0.25” x 0.25” and come in 4 foot and 6 foot lengths. Choose from smooth or grooved style.Part # Details Price

Two styles, designed to work as a single or a two handle pull. Mounting block mounts separate, so handles can be easily removed. Handles provide excellent pull ratio to release tough latches. A 9’ foot cut-to-fit cable is provided with Hood Pulls, and an 18’ cut-to-fit cable is provided with Trunk Pulls.Part # Details PriceSPC 2022P Trunk Pull - Polished $106.95SPC 2022S Trunk Pull - Satin $84.95SPC 2020P Hood Pull - Polished $98.95SPC 2020S Hood Pull - Satin $76.95SPC 2021P Hood and Trunk Pull - Polished $161.95SPC 2021S Hood and Trunk Pull - Satin $130.95

Smart Parts© - Hood & Trunk Pulls

CMW AES-4 4 Foot Smooth Strip $35.00CMW AES-6 6 Foot Smooth Strip $52.50CMW AEG-4 4 Foot Grooved Strip $35.00CMW AEG-6 6 Foot Grooved Strip $52.50

Clayton Machine Works© - Interior Aluminum Trim

SINGLE(HOOD OR TRUNK)


INTERIOR

IN

COMBINATION

LOK CHT-1300U Combination Hood / Trunk Release - Black $170.95LOK CHT-1300HT Combination Hood / Trunk Release - SS $216.95LOK HR-1100U Hood Release - Black $77.95LOK HR-1100HT Hood Release - Stainless Steel $108.95LOK TR-1200U Trunk Release - Black $93.95LOK TR-1200HT Trunk Release - Stainless Steel $123.95

Lokar® - Billet Hood & Trunk Pulls




Nu-Relic Power Windows©

Nu-Relic power windows are constructed of 1018 cold rolled steel and are designed to bolt into original mounting holes. This design also features brass oilite thrust bearings, Delco OEM motors and chrome switches. Price includes wiring harness, switches and conduit.

1932 - 39 Ford 2-Window ......................................................................................$540.001932 - 39 Ford 4-Window ......................................................................................$880.00Willy’s .........................................................................................................................$540.00Corvette and T-Bird .................................................................................................$465.002 Window Kits with Vents .....................................................................................$420.002 Window Kits No Vents ........................................................................................$555.004 Window Kits ..........................................................................................................$820.004 Window Kits No Vents ........................................................................................$995.00

Conversion kits are available for the following vehicles:

Details Price

Buick/Olds/Pontiac 1937 - 48 1955 - 57 1964 - 72 Regal/Cutlass/GTOChevrolet Cars 1930 - 54 1955 - 57 (Front & Rear) 1958 - 76 Impala (Front & Rear) 1963 - 72 Nova (Front & Rear) 1964 - 72 Chevelle (Front & Rear) 1956 - 82 Corvette 1967 - 81 CamaroChevrolet Trucks 1936 - 87 1951 - 55 Remove Vent 1959 - 87 El CaminoDodge/Plymouth 1933 - 83 Plymouth w/Vent 1940 - 74 Dodge/Plymouth/Chrysler ‘Cudas, Challengers, Road Runners, & Chargers

Ford Cars 1928 - 34 1935 - 39 Convertible, Coupe, Sedan 1940 - 48 w & w/o Vent Window 1941 - 48 Ford/Merc Convertible (Front & Rear) 1949 - 51 Ford/Merc Convertible, Coupe, Sedan 1952 - 66 1955 - 57 T-Bird 1964 - 73 Mustang 1966 - 67 FairlaneFord Trucks 1928 - 34 1938 - 79Studebakers All Cars and TrucksWilly’s 1940 - 41

Specialty Power Windows© - Power Window Kits

Our Power “Wonder-Lift” Cable Driven Delco Motor Kit is the most versatile power window kit available and is simple to install. Complete kit contains lower glass channel, GM switches, complete wire harness with switch and motor plugs and flexible stainless steel wire conduit kit for door opening.Part # Details PriceSPW PWL-2C Universal 2 Window Kit $405.00SPW 4754-PU-W/V-2C 1947 - 54 Chevy Custom Kit $405.00SPW 5557-CV-FRONT 1955 - 57 Chevy Car 2 Window $405.00SPW 5559-CHVPU-2C 1955 - 59 Chevy Truck 2 Window $405.00SPW 6772-CHVVPU-2C 1967 - 72 Chevy Truck 2 Window $405.00SPW 67CAMHT-4C 1967 Camaro 4 Window $815.00SPW 6869CAMHT-4C 1968 - 69 Camaro 4 Window $815.00


INTERIOR

IN

EL-Series Super Street Rod Power Window Kits These universal kits feature heavy-duty OEM motors with screw cable drive systems for a smooth quiet operation. Electric-Life’s Universal 2-Door Illuminated Switch Kit (4990-10-142) is included with each Power Window kit.Part # Details Standard Switches GM Chrome Switches

Power Window Switch KitsPart # Details Price


INTERIOR

IN

ELW 4990-10-142 Universal 2-Door Illuminated Switch Kit $69.30Designed to be mounted on either console or door panel. Kit comes with 3 black illuminated switches, 1 single bezel and 1 double bezel, a wiring harness with installation instructions.

ELW 4990-10-356 GM Original Equipment Style 2-Door Chrome $160.00Kit comes complete with 1 single chrome switch pod and 1 double chrome switch pod and complete wiring harness and instructions.

Electric-Life© - Power Window Switch Kits


ELW EL1000 Glue Mount $249.00 $399.00The EL1000 uses glue type glass sashes and dual sliding rollers on the mounting head. The rollers allow the regulator to move laterally as well as vertically. This unique mounting system is especially suited for vehicles with radical angled door posts and can be mounted in doors as narrow as 2 inches.

ELW EL2000 Clamp Style $249.00 $399.00The EL2000 differs from other EL-Series kits in the way it mounts to the glass. The unit comes with a floating mounting head with two rubber isolated mounts that clamp directly to the glass.

ELW EL3000 Curved Glass $249.00 $399.00The EL-3000 kit is designed for vehicles equipped with curved quarter or side windows and can be mounted in doors as narrow as three-inches.Electric-Life Custom Fit Truck Kits These are direct bolt in kits designed for your vehicle. Kit comes complete with brackets and easy to understand instructions. Electric-Life’s Universal 2-Door Illuminated Switch Kit (4990-10-142) is included with each Power Window kit. Kits may also be upgraded to include the GM style chrome switches.Part # Details Standard GM ChromeELW FD60-4047-K 1940 - 46 Ford Pickup or Panel Delivery $329.95 $429.95ELW FD53-5355-K 1953 - 55 Ford Pickup or Panel Delivery $329.95 $429.95ELW GM98-3946-K 1936 - 46 Chevy or GMC Pickup $329.95 $429.95ELW GM99-4950-K 1947 - 54 Chevy or GMC Pickup w/o Vent $329.95 $429.95ELW GM100-5154-K 1947 - 54 Chevy or GMC Pickup w/ Vent $329.95 $429.95ELW GM103-0065-K 1964 - 66 Chevy or GMC Pickup $329.95 $429.95

Electric-Life© - Power Windows



Watson’s StreetWorks© - Illuminated Oval Power Window Switch KitsPart # Details PriceWSW L39-5BOS Single Switch (Right) $90.00Beautiful new Billet 5-wire rocker switch snaps into an oval billet frame that’s 2-11/16” wide by 1-15/16” high. The frame mounts with (2) blind studs from behind. Single switch with plug and frame, terminals, wire leads and instructions.

WSW L39-5BOD Double Switch (Left) $125.00Dual switch kit for center console mounting or for both switches on the driver door only. (2) Billet 5-wire rocker switches snap into a dual oval switch frame that is 3-1/8” wide by 2-1/4” high. The frame mounts with (2) blind studs from behind. (2) switches with plugs and dual oval frame, terminals, wire leads and instructions.

WSW L39-5BOT Triple Switch (Shown) $180.00Triple kit, dual switches on the driver door & one on passenger door. (3) switches w/plugs, (1) single oval frame, (1) dual oval frame, terminals, fuse holder, wire leads, crossover wiring & instructions.

Watson’s StreetWorks© - Console Power Window Switch KitsPart # Details PriceWSW L39BCD Console Plate with Two Switches $125.00Billet 3-wire rocker switches mounted inside an attractive Billet Console Plate that’s 2-1/4” wide by 2-1/2” high with brushed finish. Add distinct styling in Billet to your custom console 2 switches, Console Plate, 2 polarity reversing modules, wire leads, connectors and instructions.

Watson’s StreetWorks© - Illuminated Power Window Switch KitsPart # Details PriceWSW L39-5BS Single Switch (Right) $80.00Billet 5-wire rocker switch snaps in rectangular frame 1-1/4” wide x 2-5/16” high. Frame mounts w/ (2) blind studs from behind. Single switch w/plug & frame, terminals, wire leads & instructions.

WSW L39-5BD Double Switch (Left) $145.00Dual switch kit - center console mounting or on the driver door only. (2) Billet 5-wire rocker switches snap in dual switch frame 2-1/4” wide by 2-5/16” high. Frame mounts w/ (4) blind studs from behind. (2) switches w/ plugs & dual frame, terminals, wire leads & instructions.

WSW L39-5BT Triple Switch (Shown) $210.00Triple kit, dual switches on the driver door & one on passenger door. (3) switches w/plugs, (1) single frame, (1) dual frame, terminals, fuse holder, wire leads, cross-over wiring & instructions.

AutoLoc™ - Electric Window Crank Switch

AutoLoc’s electric window crank switches allows operation of windows with your vehicle’s original window crank. Simply rotate your window crank up or down 15 degrees & your power window will roll up or down. Comes w/5 shaft styles to fit multiple GM & Ford applications.Part # Details PriceHOF AUTEWSU Universal Electric Window Switch $97.95 / each


INTERIOR

IN

U-Channels are generally used in division bars and as guides for the window glass to slide up and down in. Catwhiskers are the one-sided strips used on garnish moldings. U-Channels are available with or without stainless steel beads. All U-Channels and Catwhiskers are 96” long. Rubber window sweeps are 72” in length.Part # Details PriceSTA 75000073 (A) Flexible U-Channel - No Bead (5/8” W) $30.50STA 75000098 (B) Flexible U-Channel - Stainless Bead (5/8” W) $30.50STA 75000134 (C) Rigid U-Channel - Stainless Bead (1/2” W) $34.50STA 75000143 (D) Flexible Catwhisker - Stainless Bead (7/16”) $22.90STA 75000151 (E) Flexible Catwhisker - Stainless Bead (9/16”) $22.90STA 75000197 (F) Window Sweep - Rubber Lip (33/64” W x 11/16” H x 72” L) $28.90

Stan Pro© - U Channels and Catwhiskers

AutoLoc’s famous Bear Claw Latching System features a single or double rotary “claw” latch insuring maximum performance. AutoLoc’s design insures easy installation and a long life of trouble free operation. AutoLoc’s Bear Claw Door Latching System includes 2 heavy duty latches, and 2 trouble free striker bolts.Part # Details Price

IN


INTERIOR

Heavy duty all steel construction insures a long life of smooth operation. Kit includes door section mounting plates & die stamped screw holes to avoid scraping your door sill paint when closing. Kit also includes floating sticker bolt plates to insure easy alignment & installation.Part # Details PriceHOF BCINSTL Large Latch Install Kit $34.95HOF BCINSTS Small Latch Install Kit $34.95


F

E

DCBA

HOF BCLG Large - Double Rotary “Claw” Latch $39.95HOF BCSM Small - Single Rotary “Claw” Latch $39.95

AutoLoc™ - Bear Claw Latches

AutoLoc™ - Bear Claw Latch Install Kits

Roll your windows all the way up or all the way down with one touch of the button. This unit will work on all window systems.Part # Details PriceHOF WC1000 One Touch Up / Down Window Kit $39.95

AutoLoc™ - One Touch Express


Carolina Custom© - Stainless Steel Strikers

Stainless steel strikers are available for those who prefer a substitute for the standard steel strikers that come with bear-claw and small rotary latches.Part # Details PriceCAR SSS3 1/2” Stainless Steel Strikers $46.00 pairCAR SSS2 9/16” Stainless Steel Strikers $46.00 pairCAR LSS1 11/16” Stainless Steel Strikers $46.00 pair

AutoLoc™ - Bear Claw Billet Knobs

Kit designed to release Bear Claw latches. Includes matching backing plates & hardware.Part # Details PriceHOF BCKNOB Bear Claw Billet Knobs $40.00

Trique© - Altman Easy Latches

The Altman Easy Latch Kit is a vehicle specific bolt-on bear jaw rotary claw latch kit for your hot rod, street rod, custom, classic car or truck.Part # Details PriceTRI AEL08S ‘52 - ‘54 Chevy Truck $349.95TRI AEL07S ‘47 - ‘51 Chevy Truck $349.95TRI AEL05S ‘55 - ‘59 Chevy Truck $349.95TRI AEL01S ‘37 - ‘39 Ford 5-Window Coupe $349.95TRI AEL06S ‘37 - ‘39 Ford Tudor Sedan $349.95TRI AEL09S ‘40 Ford 5-Window Coupe $349.95TRI AEL10S ‘40 Ford Tudor Sedan $349.95TRI AEL02S ‘40 - ‘47 Ford Truck $349.95TRI AEL03S ‘48 - ‘52 Ford F-100 $349.95TRI AEL04S ‘53 - ‘56 Ford F-100 $244.95


INTERIOR

IN

AutoLoc heavy duty door poppers are great for any application. Guaranteed to pop out your doors smoothly and reliably. Adjust the amount your door opens by simply changing the spring tension.Part # Details Price

Chrome poppers feature rubber padded plunger and yield approximately 30 lbs. of force when fully compressed. Requires 1/2” minimum space in door jam when closed to allow for thickness of rubber pad.Part # Details Price

The simple, neat way to open bear-claw style latches from the inside of your ride. Designed to attach the release mechanism directly to the latch, a simple downward push of the Nob actuates the latch and opens the door. The trim ring and Nob are easy to install and provide a smooth, clean look.

ROUND TRIM


INTERIOR

IN


HOFDP3500

OVAL TRIM REMOTE INSTALLATION KIT

WSW B14OVS Oval Trim - Smooth Nobs $50.00WSW B14OVT Oval Trim - Turned Nobs $50.00

The trend in interior design - oval. Plates are 1-5/8” high by 2-1/4”.Available with Smooth (left) or Turned Nobs (right).Part # Details Price

WSW B14S Round Trim - Smooth Nobs $50.00WSW B14T Round Trim - Turned Nobs $50.00

Round trim plate is 2 1/4” diameter & is available with Smooth (left) or Turned Nobs (right).Part # Details Price

WSW B14R Remote Installation Kit $17.95

Allows you to install StreetWorks Neat Nobs away from the latch and door jam, forward on the door where the original inside handle was. A “T” lever and cable are used to attach to the latch. Once installed, a simple push on the Nob actuates the latch. This kit works in either steel or fiberglass cars and has all of the hardware needed to connect a Neat Nob kit to bear-claw style latches. Detailed drawing and instructions included.Part # Details Price

Watson’s StreetWorks© - Door Latch Release Kits

PAI PRR1552 Chrome Door Popper $26.00 each

Parr Automotive© - Chrome Door PopperHOFDP2500

HOF DP2500 Adjustable Door Popper - Chrome Finish $29.95HOF DP3500 Deluxe Billet Door Popper - Aluminum $39.95

AutoLoc™ - Door Poppers


Glide Engineering© - Seat Frames

Glide Engineering has developed a complete line of custom seat frames to fit virtually every application. Glide’s quality engineered, ready-to-upholster seat frames feature non-sag springs designed with lumbar support for a superior, comfortable ride. Glide seats feature a recliner mechanism, allowing the seat to recline as well as flip forward for access to trunk or storage behind the seat. A gas spring lift up seat bottom for under-seat storage is available on some models. Optional features available with most seats include contoured foam, arm rests & covers in either vinyl or leather faced. Please call with information so we can select the right application for your car.

‘35 - ‘48 COUPE & SEDAN

‘55 - ‘56 & ‘57 CHEVY

For those tough-to-open doors and decklids. Easy to install and adjust. Compact unit (5/8” diameter by 2 3/4” long) 3/4” stroke and 50 lbs. push at full compression. One of the strongest poppers on the market today.Part # Details PriceGRT SDP Golden RODtronics Super Popper $39.95 each

Golden RODtronics© - Super Popper

Dakota Digital© - Door Popper

Great for thin doors and trunks with limited space. Body length only 1 3/4” – 5/16” stroke, with a pushing force of 25 lbs.Part # Details PriceDDI DP-1 Dakota Digital $29.95 pair

Machined aluminum door boosters feature bronze guided plunger with O-ring seal. When fully compressed plunger has approx. 20 lbs. of opening force. Body measures 5/8” diameter x 2 1/8” deep. Comes with stainless mounting hardware, plunger bumper and instructionsPart # Details PricePAI PRR1550 Aluminum Door Popper $30.00 each

Parr Automotive© - Aluminum Door Poppers

IN


This manual pneumatic lumbar can be added to seat without changing your existing upholstery. Includes a holding pocket that can be added to the seat frame or backrest foam.Part # Details Price

The answer to mounting seats in your car, truck, rod, or custom. Seat Risers have adjustable height, lateral and tilt positions and are easy to install. They are made of 10 gauge steel.

These brackets add an additional flat surface to mount seat risers. Brackets can be bent to fit and mount on the sides of the transmission tunnel to create a flat surface.Part # Details Price

Install these tracks on your seats and achieve 7” front to rear travel. Low profile 1” height. Kit includes 1 locking track and 1 glide track.Part # Details Price


INTERIOR

IN


LSS ST7 Bucket Seat $27.99LSS STT7 Bench Seat $34.99

Seat Slide Tracks

LSS TB5 Installation Tunnel Bracket $9.00 each

Installation Tunnel Bracket

Langdon Seating SystemsPart # Details PriceLSS #2 Bucket Seats (4 Risers, 2 1/4” to 2 3/4” Vertical Adjustment) $125.00LSS #4 Bucket Seats (4 Risers, 4 1/4” to 6 1/2” Vertical Adjustment) $125.00Old Dog Seat RisersPart # Details PriceTBI SB2-PR Bench Seats (2 Risers, 2 1/4” to 2 3/4” Vertical Adjustment) $52.00TBI SB4PR Bench Seats (2 Risers, 4 1/4” to 6 1/2” Vertical Adjustment) $54.00TBI SB2 Bucket Seats (4 Risers, 2 1/4” to 2 3/4” Vertical Adjustment) $100.00TBI SB4 Bucket Seats (4 Risers, 4 1/4” to 6 1/2” Vertical Adjustment) $104.00

Seat Risers™

LSS LB8 Inflatable Lumbar $17.99

Inflatable Lumbar



Vintique© - ‘28 - ‘48 Ford Door Check Strap

1928-1948 Ford Door Check StrapPart # Details PriceVQI B-702828-S Metal Arm with Rubber Cushion $6.50

Old Dog - Seat Belts

Don’t compromise your safety. These quality USA made seat belts meet federal motor vehicle safety standards. Available with Chrome lift lever or Metal push button. Please call and let us help you with your selection. Seat Belts are available in 29 cool colors: Black, Flame Red, Red, Maroon, Red Wine, Orange, Purple, Tan, Brown, Dark Brown, Medium Beige, Desert Tan, Blue, Electric Blue, Dark Blue, Powder Blue, Turquoise, Cobalt Blue, Lime Green, Military Green, Dark Green, Gray, Silver, Ivory, White, Yellow, Wine & Roses, Wisteria, and Charcoal.

Available in Four Styles Price per Passenger(A) 2-Point Non-Retractable ............................................................................ $27.00(B) 2-Point Retractable ...................................................................................... $54.00(C) 3-Point Non-Retractable ............................................................................. $54.00(D) 3-Point Retractable ...................................................................................$110.00

Some Belts Available with a Sleeve - Call for Availability!

AutoLoc™ - Seat Belt AnchorAutoLoc’s seat belt anchor plates are designed for easy installation, reinforces belt mount and reduces floor tear.Part # Details PriceHOF SBHP Seat Belt Anchor Plate $14.95HOF SBHPA Angeled Seat Belt Anchor Plate $14.95

Old Dog - Seat Belt Mounting Hardware

Seat belt hardware for 2-point lap belt mounting. One kit per seat belt.Part # Details PriceBEA 950002 2-Point Seat Belt Hardware Kit $3.00 / each

A B C

D

IN


This Manual Safety Locks feature an internal spring loaded detent for more clearance. They are operated manually from inside your car and feature a micro switch for a warning light function. All lock kits come complete with two manual locks, wire, stainless mounting bolts, warning light, brushed aluminum knobs, and an installation guide.Part # Details Price

Electric Suicide Door Safety Pin KitsThe basic kit includes two safety pins without switches. These are intended to be used as door locks actuated by remotes to lock the doors from the outside or inside. The deluxe kit includes switches and wiring pigtails to be used instead of remotes to actuate the pins from the inside to act as safety pins. All kits include snap in dress bushings for both the door and post, stainless screws, and instructions.Part # Details PriceCAR ESDP201 Electric Suicide Door Safety Pin Kit $108.95CAR ESDP201D Deluxe Kit with Switches $123.95

1932-1948 Ford Door Check StrapPart # Details Price

AutoLoc™ - Suicide Door Safety System


INTERIOR

IN


DeadLoc’s locking system insures your passenger’s safety and security! DeadLoc’s unique locking design offers a long life of smooth operation. Systems come complete with all hardware. Great for all types of doors including cargo, sliding, and overhead.Part # Details PriceHOF DL1000 DeadLoc Manual Safety Door System $69.95HOF DL2500 DeadLoc Electric Safety Door System $120.95HOFDL2500

HOFDL1000

BDR 81A-702828-SS Stainless Steel Arm with Rubber Cushion $15.00

Bob Drake© - ‘32 - ‘48 Ford Door Check Strap

Suicide Door Safety Pin KitsThe body is machined aluminum with stainless steel slide pin and knob shaft. Kits include plastic snap-in dress bushings for door jambs, stainless steel screws and instructions. Black knobs are included (specify). A micro-switch is built in for wiring a dash warning light or beeper to alert you that a door has not been latched. Slide pin is spring loaded in both the in and out position, so it won’t vibrate out of position. Kits are available for Ford, Plymouth/Dodge and GM vehicles. Specify car make and model with order.Part # Details PriceCAR SDP200 Suicide Door Safety Pin Kit $73.95Optional Aluminum KnobsOptional aluminum knobs replace the standard plastic knobs in Suicide Door Safety Pin Kits. Machined from aluminum stock with a ball-milled line for accent & satin or polished finish, they blend well with other aluminum interior accessories. Size is approximately 3/4” by 1 5/8”.Part # Details PriceCAR AK202 Satin Aluminum Knobs $30.00CAR AK203 Polished Aluminum Knobs $40.00

Carolina Custom© - Suicide Safety Pin Kits

RHI MSL001 Manual Safety Lock Kit $64.95

Rocky Hinge© - Manual Safety System


Carolina Custom© - Door Handle KitsE-Z Inside Door Handle Install KitsThe inside installation kit makes it easier to install inside door handles when using rotary latches. The inside kits are available in Ford/Mopar square shank or G.M. to 1948 spline shank. Both are spring loaded to return the handle to the original position. The kit is for two doors.Part # Details PriceCAR EZH1F/M Ford / Mopar $69.95CAR EZH1GM GM to 1948 $69.95

Extreme Metal & Paint© - Billet Beverage HolderAvailable in an oval and square face design for any universal application, plus a custom square face designed for a direct replacement for 1967-72 Chevrolet pickup ash-tray.Part # Details PriceEMP 10001 - OP Oval Face - Universal $144.95EMP 10002 - SP Square Face - Universal $144.95EMP 10002 - SP-CPU Square Face - 1967 - 72 Chevy Pickup $199.95

Billet Drink Holder! Magnetic base holds tight on the glove box door, yet removes easily to store in the glove box. 3” I.D. x 2-1/8” deep holds most drink cups. Inner plastic cup to catch condensation. Dual-black O-rings for added looks.Part # Details PriceWSW B - DH Billet Drink Holder $35.00

Spun aluminum drink holders are available in two diameters and are designed to be flush mounted. They include a durable neoprene pad for the inside on the bottom with a drain hole to handle any water that might get in them.Part # Details PriceREX 457915 Small, Polished Rim, Fits 3 3/8” hole $12.95REX 457995 Large, Polished Rim, Fits 3 3/4” hole $12.95

Old Dog - Plastic Cupholder

Cupholder is made of molded ABS plastic. Fits a 3” Hole. Comes in Black only.Part # Details PriceODR LAV78-2RB 3” Cupholder $4.95

Watson’s StreetWorks© - Billet Drink Holder

Old Dog - Cupholders

IN




INTERIOR

IN


This universal trunk seal works well on many Ford and GM applicaitons as well as other makes. Sold by the foot.Part # Size PriceSRP 20-1688 Universal Trunk Seal $4.50 / Foot

Old Dog - Universal Trunk Seal

Old Dog Street Rods stocks many quality restoration parts from the following vendors:

Bob Drake – Rubber Products for FordWindshield Gaskets, Trunk Seals, Cowl Lacing, Window Seals, Cowl Vent Seals

Steele Rubber ProductsSteele Rubber Products offers quality restoration parts for Chevrolet, Cadillac, Buick, Pontiac, Oldsmobile, Ford, Mercury,

Packard, Chrysler, Dodge, Plymouth and Street Rods.

Vintique, Inc. – Rubber Products for FordHeadlight and Tail Light pads, Hood and Door Bumpers, Gas Tank Grommets,

Cowl Vent Seals, Window Seals, Hood Lacing, Window Lacing;

Many items in stock, please call for availability and pricing.

Rubber Restoration Products

Universal extrusions; illustrations represent general shape, see dimensions for exact size. Universal weather strip is sold by the foot.Part # Size PriceSSI E1085 1/4” X 3/8” $1.85SSI E1704 1/2” X 1/2” $3.55SSI E1723 3/8” X 5/8” $4.05SSI E707A 1/4” X 1/2” $2.50SSI E970 1/2” X 3/8” $2.30SSI E971 5/8” X 1/2” $4.05

SoffSeal® - Universal Weather Striping


Old Dog - Seals and Gaskets

CLE101ST CLE105ST CLE106ST CLE110ST CLE1153BST CLE125ST CLE1705ST

CLE1723ST CLE1750ST CLE1935ST CLE2123ST

CLE2897ST

CLE324P CLE432HATS CLE50322ST

CLE5036ST CLE50449ST CLE50512ST CLE5243ST CLE5253ST CLE560ST

CLE5984ST

CLE798P

CLE8490A

CLE113ST

CLE8544A

CLE8543A

Part # Size Price Per FootCLE 101ST 0.500 X 0.500 $1.75CLE 105ST 0.438 X 0.375 $1.60CLE 106ST 0.438 X 0.406 X 0.347 $1.60CLE 110ST 0.700 X 0.500 $2.20CLE 113ST 0.188 X 0.375 $1.60CLE 1153BST 0.250 X 0.375 $2.75CLE 125ST 0.592 X 0.750 $2.30CLE 1705ST 0.400 X 0.625 $1.70CLE 1723ST 0.375 X 0.625 $2.50CLE 1750ST 0.760 X 0.930 $2.50CLE 1935ST 0.850 X 0.725 $2.60CLE 2123ST 0.625 X 0.625 $1.75CLE 2897ST 0.312 X 0.500 $2.10CLE 324P 0.327 X 0.384 $2.95CLE 432HATS 0.562 X 0.562 $3.60CLE 50322ST 0.593 X 0.500 $2.50CLE 5036ST 0.695 X 0.695 $2.60CLE 50449ST 0.475 X 0.610 $2.25CLE 50512ST 0.500 X 0.625 $2.00CLE 5243ST 0.375 X 0.625 $2.00CLE 5253ST 0.375 X 0.750 $2.25CLE 560ST 0.500 X 0.500 $2.00CLE 5984ST 0.315 X 0.563 $1.60CLE 798P 0.560 X 0.380 Slot 0.125 X 0.375 $1.90CLE 8490A 0.1875 X 0.3125 $2.75CLE 8543A 0.500 X 0.500 $4.25CLE 8544A 0.312 X 0.625 $4.75

IN


Interior - Old Dog Street Rods

Documents

Transcript of Interior - Old Dog Street Rods