Interior Design and Technology Advances in the Workplace ... · installation. 09 paint ceiling pt04...

Interior Design and Technology Advances in the Workplace. Privacy, Collaboration, and WellbeingAssignment 1 - Project Overview | IND 5626 Project Programming

Group 7: Workplace | Ramiro Exposito & Leandro Lujan

Workplace represents a great part of our lives. We are living in an era of dramatic changes that are impacting businesses, cities and human experiences. Technology is playing one of the bigger roles in our daily life, since it has become ubiquitous in places of work and leisure and embedded in our buildings and cities. Is not only affecting how we live but is also disrupting traditional business practices.

The interaction between new technologies and the workplace raise interesting questions that are of our concern. Work as we know it is changing with these advances, privacy, collaboration, and employees’ wellbeing may be affected.

IntroductionTypology: Workplace

As mentioned before in the introduction, our adult life is composed mostly of activities that are related to work. The evolution of technology has made easier to have more and better access to the information, thus, making possible new work modes that not necessarily are based in a fixed location. The constant evolution of the workplace demands new researches and innovation in order to keep up with the requirements of the workforce.

Our research objectives are:• Analyze the influence of new technologies in the workplace.

• Identify and provide solutions for issues related with privacy, collaboration, and wellbeing.

• Define the role of Interior Design in fostering employee staisfaction and wellbeing.

• Propose solutions that take into consideration future changes in the workplace.

Problem Statement & Objectives

Central Question How can the design of the interior environment adapt to the new advances in technology that foster collaboration, privacy, and the wellbeing and satisfaction of employees in the workplace environment?

Sub-Questions1. How are new technology advances affecting the way we work?

2. How are privacy and collaboration affected by the use of mobile technology in the workplace?

3. How can design help achieve the right balance between privacy and collaboration in the workplace environment?

4. What is wellbeing?

5. How can interior design foster an increase in employee satisfaction and wellbeing in the workplace?

Research Questions

Research Outcomes• The way we work is shifting

drastically thanks to the continuing advances in technology. This progress has changed the environment where we work, the composition and classification of the workforce, and how they develop skills around digital environments.

• Mobile technology has permitted people the possibility to choose how, when, and where they want to work. The environment has the potential to affect the performance of the workers, natural light for example is directly related with increase in performance.

• Collaboration and privacy are very important when it comes to flexible workplace. A good balance between privacy and collaboration is necesary for wellbeing and employee satisfaction.

• Wellbeing rather than a quality is a holistic outlook that acts both at a personal and collective level. The environment is a key element affecting wellbeing of employees.

• Activity based workplace or open office concept are becoming popular thanks to advances in technology. Office work is becoming more mobile which organizations to use space more efficiently.

• Ability to choose where to work has been proved to offer outstanding results enhancing feelings of wellbeing. Switching workplaces places during the week may increase wellbeing of employees

Research Outcomes

Research Outcomes• Biophilic design points

to additional benefits in performance, user wellbeing, and health conditions in employees that are exposed to it in the workplace environment. health and cognitive functions.

• Overall satisfaction with the physical environment can lead to increase productivity and wellbeing at work.

Site Selection Criteria

LocationUrban Core of Miami

Area 10,000 - 15,000 SF

Building Typology Comercial Office

Building

Access to Natural Light

Building 1Office Building Brickell1221 Brickell 1221 Brickell AveMiami, FL 33131

Details Class A Office BuildingRentable Buig Area: 408,600 SFYear Built: 19862.42 :1,000 SF Parking Ratio

FEC

MECH.

MECH.

ELECT.

BAY & NEIGHBORHOODVIEWS

NEIGHBORHOODVIEWS

EXISTING MECHANICAL

ROOM

DATA

ALIGN ALIGN ALIGN ALIGN ALIGN

F-02 F-02F-02

F-03F-03 F-03

F-06B

F-06B

F-02

F-02 F-02F-02F-02

F-06A

F-02F-02

F-02

F-02

F-02

F-05 F-05F-05

F-03 F-03 F-03

F-03

F-03F-03

F-03

F-03

F-03

F-03

F-03

F-01A

F-01A

F-01B

F-01A

F-01A

F-01A

F-01A

F-01A

F-01A F-01A

F-01B

F-01A

F-01A

F-01A

F-01A

F-01A

F-01AF-01A

F-02 F-02 F-02 F-02 F-02 F-02 F-02 F-02 F-02 F-02

F-02

F-02

F-02

F-02 F-02 F-02

F-02

F-02

F-02

F-02

F-01A

F-01A

F-06A

F-06A

F-03 F-03

F-03

F-03

F-03

F-03

F-03

F-03

F-03 F-03 F-03

F-03

F-03

F-03

F-03

F-03

F04

4' - 6

"4'

- 6"

4' - 7

"

EQEQEQEQEQ

EQEQEQ5'

- 0"

EQ

11' - 1"11' - 1" 11' - 1"11' - 1"

1' - 9"

7' - 0"

9' - 1"

2' - 7"

2' - 0

"

7' - 0"

7' - 0"

7' - 0"

8' - 0" 8' - 0" 8' - 0" 8' - 0" 8' - 0" 8' - 0" 8' - 0" 8' - 0" 8' - 0" 8' - 0" 8' - 0"

3' - 9"

7' - 0"

7' - 1"

7' - 0"

7' - 0"

6' - 0

"

F-10

F-10

F-10

F-10 F-10

F-10

F-10

F-10F-10

EQEQ

3' - 0

"3'

- 0"

F-10

F-10

F-10

6' - 6

"1'

- 6"

2' - 6" 4' - 6"4' - 6" 4' - 6" 4' - 6"

EQ

EQ

6' - 0"

6' - 0"

EQEQ

EQ EQ

02 02

02

03 04

03 04

03 04

03 04

05

06 TYP.

07TYP.

3' - 0

"

2' - 0"

F-03 F-03

05XP5.021

2A5.21

ACT01

ACT02

ACT02

ACT02 ACT02

ACT01

ACT01

ACT01ACT01

ACT01

ACT01

ACT01

ACT01

ACT01

ACT01 ACT01

ACT01

GWB

GWB

GWB GWB

GWB

EXP

EXP EXP

09

08

02

CONFERENCEROOM/

EXECUTIVE SUITE7K02

OFFICE/ MEETINGROOM

7J02

SUPPORT7F02.2

CONFERENCEROOM

7E02

OPEN WORK7F04

PHONE ROOM7E04

PHONE ROOM7C04

OFFICE7C05

OFFICE7C06

EXECUTIVE OFFICE7C07

COPY/ PRINT7F02

PANTRY7E03

RECEPTION7C03

STO.7E02.2

EQEQEQEQ F-03

________________2A1.207

1A5.21

9' - 0"

4A5.21

6A5.21

10

10

10

10

F-06B

F-06B

F-06B

F-06B

F-06B

F-06B

F-06B

F-06B

F-06B

F-06B

9' - 0"

EQ EQ EQ

EQEQ

EXP

________________2A5.22

________________1A5.22

F-03

F-03 F-03

F-03

F-03 F-03 F-03 F-03 F-03 F-03 F-03F-03F-03 F-03

EQEQ

2' - 4

"4'

- 6"

4' - 6

"

4' - 6

"4'

- 6"

EQEQ

EQEQEQEQEQEQEQEQEQ

6"

01 2A5.01

4A5.01

7A5.21

6" 6"

9' - 0"

GWB

F-29 F-29

F-29

Date

Scale

© Gensler

Seal / Signature

Description

Project Number

Project Name

Description

SHEET NOTES

GENERAL NOTES

2017

Steven Feller P.E., LLC500 NE Third AvenueFt. Lauderdale, Florida33301USAMEP ConsultantTel 954.467.1402

Tel 415.433.3700Fax 415.836.4599

MAIN OFFICE2 Harrison StreetSuite 400Sn Francisco, CA 94105United States

SATELLITE OFFICE801 Brickell Ave.Suite 2300Miami, Florida 33131United StatesTel 305.350.7070Fax 305.350.7071

Carlos Valera, AIA, REG. FL. NO. AR96199

M. Arthur Gensler Jr. & AssociatesFL. Lic. No. AA0002837

SPEC. SUITE LEVEL 07

NOT IN CONTRACT

LEGEND As indicated

\\gen

sler.a

d\pro

jects\

Revit

User

Mode

ls\23

453\1

221 B

ricke

ll_Su

ite 70

0 V20

17_R

ocio_

Galin

do@

gens

ler.co

m.rvt

1221 BRICKELL AVE. SUITE 700 MIAMI, FL 33131

A1.207REFLECTED CEILING PLAN - LEVEL 7

79.0278.000

SPEC SUITE LEVEL 07

ROCKPOINT GROUP

SCALE: 1/8" = 1'-0"REFLECTED CEILING PLAN - LEVEL 071

01 F-09 FIXTURE IN WALL- REFER TO ELEVATION FORLAYOUT AND SIZE.

02 IN EXPOSED CEILING LOCATIONS, PAINT ALLDUCTWORK, CONDUIT, STRUCTURE,ACCESSORIES,ETC. TO MATCH CEILING FINISH PT03

03 ACOUSTIC CLOUDS- BOTTOM OF ASSEMBLY AT 8'-6"AFF.

04 PENDANT CLUSTER- BOTTOM OF FIXTURES AT 6'-6"AFF, 6'-9" AFF, 7'-0" AFF.

05 BOTTOM OF PENDANTS- 6'-6" AFF.06 BOTTOM OF F-02 PENDANTS- 8'-7" AFF., TYP.07 BOTTOM OF F-01 SERIES- 8'-6" AFF.08 CONTRACTOR TO PROVIDE HEADER AT PANTRY

OPENING FOR FUTURE GLASS PARTITIONINSTALLATION.

09 PAINT CEILING PT0410 INSTALL PER MANUFACTURE'S INSTRUCTIONS.

A WORK AREAS IN GRAY NOT IN CONTRACT.B REFER TO SHEETS G1.02 FOR SYMBOLS, GENERAL

NOTES AND SCHEDULES. REFER TO SHEET G5.01FOR PARTITION TYPES.

C REFER TO ELECTRICAL DRAWINGS FOR LIGHTFIXTURE SCHEDULES FOR LUMINAIRE SPECS,FIXTURE CUTS & DIMMING SPECS.

D TYPICAL CEILING HEIGHT DATUM TO BE 8'-7" A.F.F.U.N.O. G.C. TO VERIFY ALL SCHEDULED CEILINGHEIGHTS PRIOR TO THE START OF CONSTRUCTION.

E ALL ACOUSTICAL CEILING TILE & GRID TO BE APC-1U.N.O. CENTER CEILING GRID AND TILES IN ROOMAS SHOWN TYP. U.N.O.

F ALL GYP BD. CEILINGS AND SOFFITS TO BEPAINTED PT03 U.N.O.

G PROVIDE ACCESS PANLES IN GYP. CEILING ASREQUIRED FOR ELECTRICAL JUNCTION BOXES,MECHANICAL EQUIPMENT AND FOR ACCESS TOEXISTING EQUIPMENT AND VALVES ASDETERMINED BY BUILDING ENGINEER ANDLANDLORD. REFER TO SPECIFICATION SECTION 0831 13 ACCESS DOORS AND FRAMES FORADDITIONAL INFORMATION. VERIFY LOCATION ANDSIZE OF ANY REQUIRED ACCESS PANELS IN GYP.BD. CEILING WITH ARCHITECT. ALL LIGHTS ANDACCESS PANELS TO BE MARKED ANDCOORDINATED ON FLOOR FOR REVIEW WITHARCHITECT.

H ALLOW FOR LATERAL MOVEMENT OF THE SYSTEM.ATTACH MAIN RUNNERS AND CROSS RUNNERS ATTWO ADJACENT WALLS; MAINTAIN CLEARANCEBETWEEN THE WALL AND THE RUNNERS AT THEOTHER TWO WALLS.

I PROVIDE VERTICAL SUPPORT AS REQUIRED INBUILDING CODES. IN ADDITION, VERTICALLYSUPPORT ENDS OF RUNNERS WITHIN 8" OFDISCONTINUITIES SUCH AS MAY OCCUR WHERETHE CEILING IS INTERRUPTED BY A WALL, ORWHERE A "FLOATING" CEILING TERMINATES.

J SUPPORT LIGHT FIXTURES AND AIR DIFFUSERSDIRECTLY BY WIRES TO THE STRUCTURE ABOVE.

K LOCATE REGISTERS AND LIGHTING FIXTURESWITHIN GRID LINES. CENTER SPRINKLER HEADS,SPEAKERS, RECESSED FIXTURES, AND SIMILARCEILING ELEMENTS IN ACOUSTICAL UNITS, UNLESSOTHERWISE NOTED.

L FINISH HVAC DIFFUSERS, DRAPERY/SHADEPOCKETS, SPEAKER GRILLES, OTHER ITEMSLOCATED IN CEILING TO MATCH ADJACENT FINISH,UNLESS OTHERWISE NOTED.

M SEE MEP ENGINEERING DWGS. FOR EMERGENCYLIGHTING LOCATIONS.

N SPRINKLER HEADS TO BE CONCEALED TYPE ANDCOLOR SHALL MATCH ADJACENT FINISH.

O ALL GYP. BD. CEILINGS TO BE CONSTRUCTED OF5/8" SAG - RESISTANT GYP. BD. WITH METALFURRING AT 16" O.C.

P ALL PENETRATIONS THROUGH FIRE RATEDPARTITIONS SHALL BE PROTECTED WITH FIREDAMPERS OR FIREPROOFING AS REQUIRED.

Q PROVIDE BLOCKING ABOVE CEILING TOACCOMODATE AV INSTALLATIONS AND ALL OTHERCEILING HUNG ELEMENTS AS REQUIRED.

R CEILING TILE TO CEILING TILE INTERSECTIONS ALLPARTIAL TILES ARE TO BE CUT WITH A TEGULAREDGE TO MATCH MANUFACTURER'S EDGE. CUTEDGE TO RECEIVE MANUFACTURER'S TOUCH UPPAINT.

S THERMOSTATS, AIR DEVICES, OCCUPANCYSENSORS, STROBES, ARE SHOWN FOR LAYOUTPURPOSES ONLY. REFER TO ENGINEERINGDRAWINGS FOR FULL SCOPE OF WORK. GC TOENSURE THAT ALL WALL MOUNTED DEVICES AREINSTALLED AT EACH RESPECTIVE LOCATION ASSHOWN IN THE TYPICAL MOUNTING DIAGRAMSSHOWN ON SHEET G1.03

T ALL EXISTING CEILING AND DEVICES IN BASEBUILDING ELECTRICAL, TELEPHONE ANDMECHANICAL ROOMS TO REMAIN AND TO BEPROTECTED.

U ALL SCHEDULE CEILING DEVICES, THERMOSTATS,LIGHT SWITCHES AND FACE PLATES SHALL BEWHITE U.N.O.

V ALL CEILING TILES AT BORDER LOCATIONS TO BESQUARE CUT WHERE SHADOW MOLDING OCCURS.CUT EDGE TO BE FULLY CAPTURE BY SHADOWMOLDING U.O.N.

W PROVIDED VAV BOXES AT CONFERENCE ROOMWITH 8 PERSONS OF MORE. REFER TOMECHANICAL DRAWINGS FOR LOCATIONS ANDADDITIONAL INFORMATION

X PROVIDE "SOUND BOOTS" AT WALLS TO DECK ASNECESSARY TO AVOID ROOM TO ROOM SOUNDTRANSFER. REFER TO MECHANICAL DRAWINGSFOR LOCATIONS AND ADDITIONAL INFORMATION.

Lighting Fixture Schedule

Type Mark Description Manufacturer Model Voltage Lamp Type Wattage Mounting Comments

F-01A LED LINEAR 8' LONG LUMINAIRE, BLACK FINISH, 4" WIDE, DIRECT LUMINATION WITHSATIN LENS, CABLE HUNG

3G 3G-4PLI-D-L2-35K-277-DIM-FL-BK-60-S8' 277 V LED 35K 42 W CABLE

F-01B LED LINEAR 8' LONG LUMINAIRE, BLACK FINISH, 4" WIDE, DIRECT LUMINATION WITHSATIN LENS, CABLE HUNG

3G 3G-4PLI-D-L2-35K-277-DIM-FL-BK-60-S6' 277 V LED 35K 32 W CABLE

F-02 THIN DECORATIVE CYLINDER CABLE MOUNTED LUMINAIRE, BLACK FINISH OCL Turris 0 V LED 35K 9 W CABLEF-03 4" SQUARE LED DOWNLIGHT, ALZAK REFLECTOR, WHITE TRIM FOCALPOINT FLC33D SO 1300L VOLT LD1 T BH LC3 SO 1300L

35K DNT WFL CD WH16 W

F-04 LED COVE LIGHT AT AXIOM TRIM CEILING IN CONFERENCE ROOM ECOSENSE L35 I X" 04 35 80 MULT 120 LED 35K 4 W SURFACE UNVF-05 DECORATIVE PENDANT LIGHT, BLACK FINISH, BLACK CABLE POL KOMA TAISHO 2750.25-E (1) E26 LED 9 W CABLE 120 VF-06A LED LINEAR 8' LONG LUMINAIRE, BLACK FINISH, 4" WIDE, DIRECT LUMINATION WITH

SATIN LENS, RECESSED IN 9/16" GRID3G 3G-4RLI-L2-35K-277-DIM-GC1P-FL-S8' LED 35K 16 W RECESSED 277 V

F-06B LED LINEAR 4' LONG LUMINAIRE, BLACK FINISH, 4" WIDE, DIRECT LUMINATION WITHSATIN LENS, RECESSED IN 9/16" GRID

3G 3G-4RLI-L2-35K-277-DIM-GC1P-FL-S4' LED 35K 16 W RECESSED 277 V

F-07 LED TAPE LIGHT MOUNTED IN CHANNEL IN MILLWORK OPTOLUM TR-9-35 8 O * X'X" LED 35K 7 W PER DETAIL 24 V; REMOTE DRIVERF-08 UNDERCABINET LIGHT FEELUX TUNELIGHT 2 35K LED 35K 7 W SURFACE 120 VF-09 LINEAR LIGHT, 1.5" WIDE, SHALLOW HOUSING TO MOUNT IN DRYWALL AT ELEVATOR

WALL - CHANGE TO REMOTE DRIVER IF 3.5" CANNOT BE ATTAINED FOR DRIVERHOUSING

BARTCO BIW11O-SN-*-X"-35-IDM(CONFIRM INTEGRALPRIOR TO ORDER) 5

LED 35K 7 W RECESSED UNV

F-10 DECORATIVE BLACK PENDANT LIGHT AT OPEN COLLABORATION POL KOMA MEIJI 2752.25-E (1) E26 LED 9 W CABLE 120 VF-29 THIN LINEAR RECESSED LED ALONG PERIMETER. CONFIRM PRIOR TO FINAL ENTRY

OF ORDER WITH SHOP DRAWING SIGN OFF, CORNERS PER PLAN.BARTCO BIW11O-SN-*-X"-35-IDM(CONFIRM INTEGRAL

PRIOR TO ORDER) 5LED 35K 5 W RECESSED UNV 5W/FT

X EDGELIT RECESSED EXIT LIGHT LED 3 W RECESSED UNV

SCALE: 1/4" = 1'-0"REFLECTED CEILING PLAN - LEVEL 07 - Callout 12

11/17/17 ISSUE FOR PERMIT & PRICING

3' - 0"

2' - 1

0"2'

- 2"

E7

ALIG

N

4A5.31

3A5.31

PL02

PL02

PL02

5A5.02

WC02

UPH01

WC02

WC02

WC02

WC02

WC01

MT014"2'

- 10"

FELT TO OVERLAP

BY 1" TYP.

UPH01

WC01

WC02

WC02

WC02

WC02

WC02

WC01

FELT TO OVERLAP

BY 1" TYP.

WC01

WC017"TY

P.11

"

RB02

WC01

WC02

WC02

WC02

WC02

WC02

WC01

WC01

WC01

TYP.

11"

7"

FELT TO OVERLAP

BY 1" TYP.

RB02

WC01

WC02

WC02

WC02

WC02

WC02

WC01

PL02

PL02

FELT TO OVERLAP

BY 1" TYP.

SP01

2' - 6

"3"

TYP.

11"

3A5.31

EQ EQ 1' - 6" 1' - 6"

6A5.31

ALIGN ALIGN ALIGN ALIGN ALIGN

EQ EQ

PL02

PL02

PL02

EQ EQ8' - 10"6' - 5"

DM01 DM01 DM01 DM01 DM01

4A5.31

3A5.31

EQEQ

PL02

7A5.31

2' - 6

"

PL02

OPEN SHELVING2' - 6

" 8A5.31

2' - 6

"

PL02

OPEN SHELVING8

A5.31

2' - 6

"

PL02 OPEN SHELVING8A5.31

Date

Scale

© Gensler

Seal / Signature

Description

Project Number

Project Name

Description

SHEET NOTES

GENERAL NOTES

2017


Tel 415.433.3700Fax 415.836.4599






3/8" = 1'-0"

\\gen

sler.a

d\pro

jects\

Revit

User

Mode

ls\23

453\1

221 B

ricke

ll_Su

ite 70

0 V20

17_R

ocio_

Galin

do@

gens

ler.co

m.rvt


A2.02INTERIOR ELEVATIONS

79.0278.000

SPEC SUITE LEVEL 07

ROCKPOINT GROUP

SCALE: 3/8" = 1'-0"COPY/PRINT ELEVATION 12

SCALE: 3/8" = 1'-0"PHONE ROOM 1 ELEVATION 14



SCALE: 3/8" = 1'-0"CONF. ROOM/ EXECUTIVE SUITE ELEV. 17

SCALE: 3/8" = 1'-0"PORTAL ELEVATION 11

SCALE: 3/8" = 1'-0"COPY/PRINT ELEVATION 23

SCALE: 3/8" = 1'-0"OFFICE/MEETING ROOM ELEVATION8

SCALE: 3/8" = 1'-0"OFFICE ELEVATION 19

SCALE: 3/8" = 1'-0"OFFICE ELEVATION 210


2A5.01

9' - 0

"

1A5.01

6"

8A5.41

0606

05 05 05 05WC04WC04WC04WC04

EQEQEQEQEQEQ 1' - 5"

GL01WD01

GL01 GL01 GL01 GL01 GL01

6A5.01

5A5.01

4A5.01

EXISTING DRINKING WATER FOUNTAIN

3A5.01

1A5.01

8A5.41

HEIG

HT O

F PA

NTRY

COU

NTER

BEH

IND

2' - 1

0"

8' - 7

"

HEIG

HT O

F GL

ASS

BEHI

ND5'

- 8"

3A5.02

01

11' - 2"

5' - 0

"

EQ EQ

2' - 6

"

EQ EQ EQ 1' - 6" 1' - 6"

3A5.31

6A5.31

03

PL01

PL02

WC01

WC01

WC02

SP01

WC01

WC01

WC02

FELT TO OVERLAP BY 1" TYP.

RB02

7"TY

P.11

"

2' - 9

"3'

- 8"

EQ EQ

1A5.02

02

5' -

0"

Date

Scale

© Gensler

Seal / Signature

Description

Project Number

Project Name

Description

SHEET NOTES

GENERAL NOTES

2017


Tel 415.433.3700Fax 415.836.4599






3/8" = 1'-0"

\\gen

sler.a

d\pro

jects\

Revit

User

Mode

ls\23

453\1

221 B

ricke

ll_Su

ite 70

0 V20

17_R

ocio_

Galin

do@

gens

ler.co

m.rvt



79.0278.000

SPEC SUITE LEVEL 07

ROCKPOINT GROUP

SCALE: 3/8" = 1'-0"ELEVATOR LOBBY ELEVATION 11



SPEC SUITE ELEVATOR LOBBY

SCALE: 3/8" = 1'-0"RECEPTION ELEVATION 25

SCALE: 3/8" = 1'-0"ENTRY CONFERENCE ELEVATION 16



04

01 PROVIDE BLOCKING FOR FUTURE SIGNAGE02 COORDINATE NICHE DIMENSIONS WITH AV

EQUIPMENT.03 PROVIDE BLOCKING FOR AV DISPLAY MOUNT.04 PROVIDE LEVEL 5 FINISH WRITABLE SURFACE.05 NEW CALL LANTERN FINISH, BRUSHED STAINLESS.06 NEW CALL BUTTON FINISH PANEL TO BE ADJUSTED TO

BE FLUSHED WITH NEW WALL FINISH.


2A5.01

9' - 0

"

1A5.01

6"

8A5.41

0606

05 05 05 05WC04WC04WC04WC04


GL01WD01


6A5.01

5A5.01

4A5.01


3A5.01

1A5.01

8A5.41

HEIG

HT O

F PA

NTRY

COU

NTER

BEH

IND

2' - 1

0"

8' - 7

"

HEIG

HT O

F GL

ASS

BEHI

ND5'

- 8"

3A5.02

01

11' - 2"

5' - 0

"

EQ EQ

2' - 6

"

EQ EQ EQ 1' - 6" 1' - 6"

3A5.31

6A5.31

03

PL01

PL02

WC01

WC01

WC02

SP01

WC01

WC01

WC02


RB02

7"TY

P.11

"

2' - 9

"3'

- 8"

EQ EQ

1A5.02

02

5' -

0"

Date

Scale

© Gensler

Seal / Signature

Description

Project Number

Project Name

Description

SHEET NOTES

GENERAL NOTES

2017


Tel 415.433.3700Fax 415.836.4599






3/8" = 1'-0"

\\gen

sler.a

d\pro

jects\

Revit

User

Mode

ls\23

453\1

221 B

ricke

ll_Su

ite 70

0 V20

17_R

ocio_

Galin

do@

gens

ler.co

m.rvt



79.0278.000

SPEC SUITE LEVEL 07

ROCKPOINT GROUP









04





2A5.01

9' - 0

"

1A5.01

6"

8A5.41

0606

05 05 05 05WC04WC04WC04WC04


GL01WD01


6A5.01

5A5.01

4A5.01


3A5.01

1A5.01

8A5.41

HEIG

HT O

F PA

NTRY

COU

NTER

BEH

IND

2' - 1

0"

8' - 7

"

HEIG

HT O

F GL

ASS

BEHI

ND5'

- 8"

3A5.02

01

11' - 2"

5' - 0

"

EQ EQ

2' - 6

"

EQ EQ EQ 1' - 6" 1' - 6"

3A5.31

6A5.31

03

PL01

PL02

WC01

WC01

WC02

SP01

WC01

WC01

WC02


RB02

7"TY

P.11

"

2' - 9

"3'

- 8"

EQ EQ

1A5.02

02

5' -

0"

Date

Scale

© Gensler

Seal / Signature

Description

Project Number

Project Name

Description

SHEET NOTES

GENERAL NOTES

2017


Tel 415.433.3700Fax 415.836.4599






3/8" = 1'-0"

\\gen

sler.a

d\pro

jects\

Revit

User

Mode

ls\23

453\1

221 B

ricke

ll_Su

ite 70

0 V20

17_R

ocio_

Galin

do@

gens

ler.co

m.rvt



79.0278.000

SPEC SUITE LEVEL 07

ROCKPOINT GROUP









04





Building 1Office Building Brickell

Reflected Ceiling Plan

Furniture Plan

Elevations

Building 2Office Building Coral GablesAlhambra West95 Merrick Way , Coral Gables, FL 33134.

Details Class B Office BuildingRentable Buig Area: 98,831 SFYear Built: 19612:1,000 SF Parking Ratio

RECEPTION301A

COMMUNITYZONE301B

TEAMINGAREA301C

PANTRY302

CORRIDOR305A

CONFERENCEPASSAGE

306

LARGECONFERENCE

ROOM307

HUDDLEROOM

308CONFERENCE

ROOM309

HUDDLEROOM

310

NEIGHBORHOOD1

311A

OFFICE312

OFFICE313

OFFICE314

OFFICE315

OFFICE316

OFFICE317

OFFICE318

OFFICE319

OFFICE320

OFFICE326

OFFICE325

OFFICE324

OFFICE323

OFFICE322

OFFICE321

OFFICE327

NEIGHBORHOOD2

328A

OFFICE329

OFFICE330

OFFICE331

OFFICE332

OFFICE333

OFFICE334

OFFICE335

OFFICE336

OFFICE337

OFFICE338

OFFICE339

OFFICE340

OFFICE341 OFFICE

342OFFICE

343

PHONE RM344

PHONE RM345 PHONE RM

346STORAGE

347

OFFICE350

OFFICE351

OFFICE352

OFFICE353

OFFICE354

OFFICE355

OFFICE356

OFFICE361

OFFICE357

OFFICE360

OFFICE358

CORRIDOR348

TREEPORTAL

349

PHONE RM303

BUSINESSCTR304

NEIGHBORHOOD3

359A

OFFICE362

OFFICE363

OFFICE364

PHONE RM365

PHONE RM366

OFFICE367

SERVER368

WOMENS RR305F

MENS RR305E

MECHANICALROOM305D

ELECTRICALROOM305C

JAN. CL305B

EAST STAIR301L

NORTHSTAIR305M

WEST STAIR308A

________________1A12.40

________________1A12.41

CH-01 TYP.

T-01 TYP.

T-02T-02

T-02

T-02 T-02

CH-01 TYP.

T-01 TYP.

CH-01 TYP.

T-01 TYP.

CH-01 TYP.

T-01 TYP.

CH-02

CH-03

CH-06

CH-01

CH-05

CH-05

CH-05

T-03

T-03

T-04

T-05

T-06

T-07

T-08

T-09

T-09 T-09

T-09

T-10

T-11

WS-1

WS-2

BE-01

L-01

T-04

T-12

________________3A12.41

14' - 0"

5' - 0

"

20' - 8"

Date

Scale

© Gensler

Seal / Signature

Description

Project Number

Project Name

Description

SHEET NOTES

2015

Initial Engineers, P. A.7145 S.W. 42nd TerraceMiami, Florida [email protected] 305. 669. 9393Fax 305. 669. 9178

AMICON CONSTRUCION2400 NE 2nd AveStudio BMiami, FL 33137Tel 305.573.8030

WALTER TRUJILLO, AIA, REG. FL. NO. AR96188

Tel 415.433.3700Fax 415.836.4599

MAIN OFFICE2 Harrison StreetSuite 400San Francisco, CA 94105United States

SATELLITE OFFICE801 Brickell AvenueSuite 2300Miami FL 33131Tel 305.350.7070

Lic. No. AA0002837

1/8" = 1'-0"

\\gen

sler.a

d\pro

jects\

Revit

User

Mode

ls\18

482\C

ENTR

AL_7

9.012

6.000

_RVT

14_V

era F

erna

ndez

-Ville

gas.r

vt

95 MERRICK WAY3RD FLOORCORAL GABLES, FL 33134

A06.03THIRD FLOOR FURNITURE PLAN

79.0126.000

PIPELINE CORAL GABLES

SCALE: 1/8" = 1'-0"LEVEL 3 FURNITURE PLAN1

A.

REFER TO SHEETS A00.10 FOR GRAPHICSYMBOLS, ABBREVIATIONS AND GENERALNOTES.

B.

REFER TO FURNITURE VENDOR ANDELECTRICAL DRAWINGS OR LOCATIONSOF FLUSH FLOOR BOX AND POKETHROUGH DEVICES. CONTRACTOR TOCOORDINATE LAYOUT OF FURNITUREWITH FURNITURE VENDOR/SUPPLIERPRIOR TO INSTALLATION OF WALL &FLOOR MOUNTED DEVICES.

C.

GRAY SHADED AREAS INDICATE AREASNOT IN SCOPE OF WOR; OTHERDISCIPLINES MAY PASS THROUGH OREXTEND INTO THESE AREAS, GC TOCOORDINATE.

D.

FURNITURE IS SHOWN FOR REFERENCEAND COORDINATION WITH TRADES.COORDINATE FINAL FURNITUREINFORMATION WITH OWNER'S FURNITUREVENDOR. COORDINATE LAYOUT ANDPOWER AND COMMUNICATIONSREQUIREMENTS WITH FURNITUREVENDOR AND ARCHITECT.

E.

COORDINATE AND PROVIDE BLOCING FORFURNITURE ITEMS ATTACHED ORMOUNTED TO WALLS AND/OR CEILINGS.REFER TO FURNITURE VENDORDRAWINGS FOR ADDITONAL SCOPE OFWORK.

F. CONTRACTOR SHALL COORDINATELAYOUT AND SCHEDULE OF WOR WITH:FURNITURE VENDOR, FURNITUREINSTALLER, OWNER AND RELATEDTRADES.

G.

REFER TO ELECTRICAL, IT AND AVDRAWINGS FOR ADDITIONALINFORMATION.

H.

COORDINATE FINAL AV INSTALLATIONWITH AUDIO VISUAL VENDOR.

I. A MINIMUM OF 44" OF CLEARANCE IS TOBE PROVIDED AT ALL PRIMARY EGRESSPATHWAYS AND A MINIMUM OF 36"CLEARANCE IS TO BE PROVIDED AT ALLSECONDARY EGRESS PATHWAYS.FURNITURE VENDOR TO COORDINATEREQUIRED EGRESS PATHWAYS WITHARCHITECT.

FURNITURE NOTES

02.06.2015 ISSUE FOR PERMIT AND BID

ALIG

N

ALIG

N

ALIG

N

ALIG

N

ALIG

N

ALIG

N

ALIG

N

ALIG

N

WD-1

2120

________________6A12.42

OPEN TOBEYOND

PORT

AL H

EIGH

T8'

- 0"

EQ EQ

9' - 0

"

4"

2' - 4

"6'

- 6"

EQ EQ

WD-2

P-1 CHAIR RAIL

ST-1

12A12.30

SIM

6A12.20

WD-1

REFER TO SHEET A12.42FOR INFORMATION ONSPACING AND PROFILE OFRIB SECTIONS.TY

P.1'

- 0"

24

WB-1WC-2

07

08 08

OPEN TOBEYOND

8' - 0

"

OPEN TOBEYOND

WB-1P-1

EQ. EQ.

2"6'

- 6"

WD-2

P-1 CHAIR RAIL

ST-1

CEILI

NG H

EIGH

T VA

RIES

2' - 4

"

4"

9 WOOD PANELS

12A12.30

ELEVEN (11) 2'-0" STONE SECTIONS

8A12.20

6A12.20

6A12.20

SIM

4"2'

- 6"

2"

EQEQ

EQEQEQEQ

WD-2

P-1 CHAIR RAIL

12A12.30

SIM

6A12.20

Date

Scale

© Gensler

Seal / Signature

Description

Project Number

Project Name

Description

SHEET NOTES

2015




Tel 415.433.3700Fax 415.836.4599



Lic. No. AA0002837

3/8" = 1'-0"

\\gen

sler.a

d\pro

jects\

Revit

User

Mode

ls\18

482\C

ENTR

AL_7

9.012

6.000

_RVT

14_V

era F

erna

ndez

-Ville

gas.r

vt


A11.04INTERIOR ELEVATIONS- TEAMING AREA AND RECEPTION

79.0126.000


SCALE: 3/8" = 1'-0"TEAMING AREA ELEVATION 11



SCALE: 3/8" = 1'-0"ELEVATOR LOBBY ELEVATION5

SCALE: 3/8" = 1'-0"RECEPTION DESK ELEVATION6

SCALE:TEAMING AREA VIEW 14

01 F10- UNDERCOUNTER STRIP LIGHT.02 FILLER PANEL.03 PROVIDE BUILT IN TRIM KIT FOR MICROWAVE.04 F3- COVE LIGHT05 AV DISPLAY- CONFIRM FINAL SIZE WITH OWNER06 MITERED CORNER07 WALL REVEAL08 EXISTING ELEVATOR DOOR AND FRAME TO

REMAIN.09 COORDINATE PANEL WITH OPENING FOR FIRE

HOSE CABINET. PROVIDE 1/4" SS EDGE TRIMAROUND CABINET TO BE FLUSH WITH FACE OFPANEL.

10 F15 WALL SCONCE- MOUNT AS NOTED.11 F9 WALL SCONCE- MOUNT AS NOTED.12 WALL REVEAL TO ALIGN WITH HEADER OF

OFFICE FRONT SYSTEM, TYP.13 OFFICE FRONT SYSTEM.14 COPY/PRINT EQUIPMENT BY OWNER- SHOWN

FOR REFERENCE ONLY.15 OPEN SHELVING DISPLAY WITH SLIDING FRONT

CHALKBOARD PANEL.16 PROVIDE PANEL BETWEEN REFRIGERATOR AND

MILLWORK17 F8 WALL SCONCE- MOUNT AS NOTED.18 PROVIDE S.S. EDGE TRIM AT EDGE OF WOOD

PANELING, ALL SIDES.19 SECURE MILLWORK PANELS TO CEILING VIA

UNISTRUT SYSTEM BOLTED TO WAFFLE SLAB-COORDINATE FINAL LOCATION AND SPACINGWITH WAFFLE SLAB ORIENTATION.

20 SCHEDULED LIGHT FIXTURES TO HANG INBETWEEN RIB SECTIONS. REFER TO RCP FORMOUNTING HEIGHTS.

21 COORDINATE SWING ATTACHMENT TO FALLBETWEEN RIB SECTIONS.

22 COORDINATE ALIGNMENT OF JOINTS BETWEENHORIZONTAL AND VERTICAL SURFACES.

23 REMOVABLE SEAT CUSHION WITH UP-6 FABRIC.24 SECURE MILLWORK PANELS TO WALL VIA

UNISTRUT SYSTEM. PAINT TO MATCH WALLFINISH.

SCALE: 3/8" = 1'-0"PANTRY EXTERIOR ELEVATION AT COMMUNITY ZONE7 02.06.2015 ISSUE FOR PERMIT AND BID

ALIG

N

ALIG

N

ALIG

N

ALIG

N

ALIG

N

ALIG

N

ALIG

N

ALIG

N

WD-1

2120

________________6A12.42

OPEN TOBEYOND

PORT

AL H

EIGH

T8'

- 0"

EQ EQ

9' - 0

"

4"

2' - 4

"6'

- 6"

EQ EQ

WD-2

P-1 CHAIR RAIL

ST-1

12A12.30

SIM

6A12.20

WD-1

REFER TO SHEET A12.42FOR INFORMATION ONSPACING AND PROFILE OFRIB SECTIONS.TY

P.1'

- 0"

24

WB-1WC-2

07

08 08

OPEN TOBEYOND

8' - 0

"

OPEN TOBEYOND

WB-1P-1

EQ. EQ.

2"6'

- 6"

WD-2

P-1 CHAIR RAIL

ST-1

CEILI

NG H

EIGH

T VA

RIES

2' - 4

"

4"

9 WOOD PANELS

12A12.30

ELEVEN (11) 2'-0" STONE SECTIONS

8A12.20

6A12.20

6A12.20

SIM

4"2'

- 6"

2"

EQEQ

EQEQEQEQ

WD-2

P-1 CHAIR RAIL

12A12.30

SIM

6A12.20

Date

Scale

© Gensler

Seal / Signature

Description

Project Number

Project Name

Description

SHEET NOTES

2015




Tel 415.433.3700Fax 415.836.4599



Lic. No. AA0002837

3/8" = 1'-0"

\\gen

sler.a

d\pro

jects\

Revit

User

Mode

ls\18

482\C

ENTR

AL_7

9.012

6.000

_RVT

14_V

era F

erna

ndez

-Ville

gas.r

vt


A11.04INTERIOR ELEVATIONS- TEAMING AREA AND RECEPTION

79.0126.000





SCALE: 3/8" = 1'-0"ELEVATOR LOBBY ELEVATION5

SCALE: 3/8" = 1'-0"RECEPTION DESK ELEVATION6

SCALE:TEAMING AREA VIEW 14
















SCALE: 3/8" = 1'-0"PANTRY EXTERIOR ELEVATION AT COMMUNITY ZONE7 02.06.2015 ISSUE FOR PERMIT AND BID

ALIG

N

ALIG

N

ALIG

N

ALIG

N

6' - 0

"

0517 17

EQEQ

7' - 0"

4' - 0

"4'

- 0"

1' - 0" 3' - 6"1' - 0"3' - 6"

EQEQ EQEQ

EQEQ

1A12.30

1A12.30

ST-1

4"2'

- 6"

PORT

AL H

EIGH

T8'

- 0"

04 04

PERI

METE

R CE

ILING

9' - 0

"

CENT

ER P

OP U

P10

' - 0"

8A12.31

EQEQ

EQ4"

2' - 0

"2"

EQEQ

EQ

ST-1

06

22

06TYP.

TYP.

TYP.

06

22

06TYP.

TYP.

TYP.

6A12.20

6A12.20

3' - 0" 1' - 6" 2' - 0"

0404

A-1

A-2A

A-2B A-3

A-4

EQ. EQ.

REFER TO EQUIPMENT SPEC4' - 2".

03

2' - 0" 2' - 0"REFER TO EQUIPMENT SPEC

2' - 4"

P-1 FASCIA

SS-1

PL-4

PL-415

DIRECTIONOF GRAIN

TL-2

7A12.30

16

2' - 6" 2' - 0" 2' - 0" 1' - 6" 2' - 0"VIF

3' - 0"

PORT

AL H

EIGH

T8'

- 0"

PERI

METE

R CE

ILING

9' - 0

"

CENT

ER P

OP U

P CE

ILING

10' -

0"

SOFF

IT A

T MI

LLW

ORK

8' - 0

"

5' - 3

1/2"

4"

1A12.31

2A12.31

4A12.31

2"2'

- 0"

EQEQ

EQ

EQEQ

EQ4"

2' - 0

"2"6

A12.20

6A12.20

12A12.30

SIM

12A12.30

SIM

ST-1 ST-1

2' - 1

0"

4' - 3 1/8"

PORT

AL H

EIGH

T8'

- 0"

PERI

METE

R CE

ILING

9' - 0

"

CENT

ER P

OP-U

P10

' - 0"

OPEN TOBEYOND

0404

2' - 0

"2"

EQEQ

EQ1'

- 0"

EQ. "A"EQ.EQ. "A" EQ EQ EQ EQ

22

06 15

6A12.20

6A12.20

4"

PORT

AL H

EIGH

T8'

- 0"

PERI

METE

R CE

ILING

9' - 0

"

CENT

ER P

OP U

P10

' - 0"

OPEN TOBEYOND EQ

EQEQ

2' - 0

"2"

1' - 0

"

EQEQEQEQ

06

22

0404

15

6A12.20

6A12.20

Date

Scale

© Gensler

Seal / Signature

Description

Project Number

Project Name

Description

SHEET NOTES

2015




Tel 415.433.3700Fax 415.836.4599



Lic. No. AA0002837

3/8" = 1'-0"

\\gen

sler.a

d\pro

jects\

Revit

User

Mode

ls\18

482\C

ENTR

AL_7

9.012

6.000

_RVT

14_V

era F

erna

ndez

-Ville

gas.r

vt


A11.01INTERIOR ELEVATIONS- PANTRY

79.0126.000


SCALE: 3/8" = 1'-0"PANTRY ELEVATION 11




SCALE:PANTRY VIEW 18

SCALE:PANTRY 3D VIEW11
















02.06.2015 ISSUE FOR PERMIT AND BID

ALIGN

ALIGN ALIGN

ALIGNALIGN

ALIG

N

ALIG

N

ALIGN

ALIGN ALIGN

ALIGNALIGN

ALIGN ALIGN

ALIG

N

ALIG

N

ALIG

N

ALIGN

ALIG

N

ALIG

N

ALIGN ALIGNALIGN ALIGN

ALIGN ALIGN

ALIGN

ALIG

N ALIGN

ALIGN

ALIGN

8' - 0"

TYP.OFFICECEILING

F2

8' - 0"

F2

F2

F2

F2

F2

F6

F6

F6

F6

8' - 0"

8' - 0"TYP.OFFICECEILING

VARIES EXPOSED WAFFLESLAB

8' - 6" BOTTOM OFBAFFLE

26' -

0"

EQ.

6"

VARIES

ACT-1

ACT-2 ACT-3

ACT-2GWB

F1B F1B F1B F1B

4 FUL

L TILE

S16

' - 0"

2' - 0" 2' - 0"

EQ.

EQ.

03

20' - 0"

04

04

2' - 0"

2' - 6" 3' - 0"

F2 F2

F2

F2

F2 F2 F2

F2 F2 F2

F2

________________3A04.03

________________2A04.03

F2 F2 F2 F2

F2

F2

F2

F2 F2 F2 F2 F2

2' - 0"

8' - 0"

8' - 0"

7' - 6

1/2"

15' - 0"

6' - 0"

08

F6 F6

8' - 0"

TYP. OFFICECEILING

ACT-1

8' - 0"

TYP. OFFICECEILING

ACT-2

1' - 7

".1'

- 7"

+6'-6" AFF +6'-6" AFF

F9 F9 F9 F9

0909

7' - 6

1/2"

15' - 0"

04

04

04

04

8' - 0" ACT-1

6' - 0

"

F2

F2 F2F2 F2

F6F6

F2F2

03

F13

F13

11

11

6' - 0"

4' - 0"

F28' - 0"

PHONEROOM

8' - 0"PHONE ROOMS

GWBGWB

GWB

EQ EQ

F2

F2

F2

F2

F2

F2

F2

8' - 0"

F2

GWB

1212

12

3' - 0"

8' - 0"ACT-1

ACT-1ACT-2

+6'-6" AFF+6'-6" AFF

8' - 6"

ACT-1

ACT-3

VARIESEXPOSED WAFFLESLAB

07

8' - 0"PORTAL, TYP.GWB

PORTAL, TYP.GWB

8' - 0"

F15

14

15

14

15

F15 F15

1415

F15

14

15F2

F15

F15

F15

F15

F2 F2

8' - 0"

GWB

F2 F28' - 0"

F15F15F15F15

2A12.10

2A12.10

2A12.10

6A12.10

8' - 6"

17

17

17

17

8' - 6"

GWB

8' - 6"

GWB

04 04

04

VARIES

EXPOSED WAFFLESLAB

07

F2

F2

3' - 6 1/2".6' - 0"

8' - 0" GWB 0104

VARIESEXPOSED WAFFLE SLAB

07

2' - 6". F2 F2 F2

EQ.

10' - 0"

19

F2 F2F2

8' - 0"

ACT-2

7' - 9 1/4".8' - 0 1/2"

8' - 0"

2' - 0

"

2' - 0"

2' - 0

".

EQ EQF13

EQEQ

8' - 0

"

07

07

8' - 6"ACT-1

8' - 6"ACT-1

8' - 6"

ACT-1

2

2

2

2

2

2

2

2 EQ. EQ.EQ. EQ.

2' - 0

"

2' - 0

"

8' - 0"

F2F2 F2 F2F2

F2

F2

F2F2

F2

F1A F1A

01

F2 F2 F2 F2 F2 F2 F2 F2EQEQTYP.

EQEQ

F2 F2 F2 F2 F2 F2 F2 F2

F2

EQ EQ EQ EQ EQ EQ EQ EQ EQ EQ

F2

EQ EQ EQ EQ EQ EQ EQ EQ EQ EQ

F1A F1A F1A F1A F1A F1A F1A F1A F1A F1AF1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

2' - 6

"2'

- 6"

F2 F2

F2 F2

F1A F1A F1A F1A F1A F1A F1A F1A

F1A

F1A

F1A

F1A

F1A F1A F1A F1A F1A F1A F1A F1A F1A F1A F1A F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F1A

F2

F2

F2F2

F2F2

F2F2

F2F2

EQEQ

EQ

EQEQEQEQ

EQEQEQ

EQEQ

2' - 0

"EQ

EQ

2' - 0

"2'

- 0"

EQEQ

EQEQ

EQEQ

EQ EQ

F17

8' - 6"

F17 F17 F17

F17

F17

F17 F17

F17

F17

F17

F17

F17

F17

F17

F17

F17

F17

F4F4F4

F1A

F2

1' - 5

"

2' - 6"

2' - 5

1/2"

20' - 2 5/8"

3' - 0

"2'

- 2 1/

4"

2' - 2

1/4"

1' - 3

7/8"

3' - 0" 3' - 0"

9' - 0"

9' - 0"

9' - 0"

GWB

GWB

GWB

10' - 0"

8' - 0"

COVE

PO C

KET,

TYP

.

1' - 0

"

2A12.10

2A12.10

9' - 0"9' - 0" 9' - 0"

F2 F2

F2 F2

F2 F2 F2 F2

F2 F2 F2 F2

F2 F2

F2 F23A12.10

3A12.10

3A12.10

F2

F2 F2 F2 F2

F2 F2 F2 F2

F4

COVE

PO C

KET,

TYP

.

1' - 0

"

F3

F3

01

01

05

F7

F7

F7

F7

F7

F7

F7

F7

F7

F7

F7

F7

F7

F7

F7

F7

F7

F7

5A12.10

06

06

7'-0" AFF

7'-0" AFF

7'-0" AFF

8'-0" AFF

8'-0" AFF

8'-0" AFF

8'-0" AFF

8'-0" AFF

8'-0" AFF

7'-6" AFF

7'-6" AFF

7'-6" AFF

7'-6" AFF7'-6" AFF

7'-6" AFF

7'-0" AFF

7'-6" AFF

7'-6" AFF

8'-0" AFF

10' - 0"

+7'-6" AFF

ACT-1

ACT-1

EQ.EQ.

EQ.

EQ.

EQ. EQ. EQ. EQ.

TL-3

8' - 0

13TYP.

+7'-0" AFF +7'-0" AFF

1A12.42

________________

7A12.10

3' - 0"18 18

18' - 0"

F2 F2 F2

F4 F4+7'-6" AFF +7'-6" AFF

F2

F2F2

F2 F2

F2

COVE POCKET, TYP.

1' - 0"

ACT-1

GWB9' - 0"

F3

01

F11A

F11BF11B

F7

F7

F7

F7

F7

F7F7

F7

F7

F7 F7

F7

F7F7

F7

F7

F7

F7F7

F7

F7

F7

F7

F7

F7

F7

F16

F7

F7

VARIES

EXPOSEDWAFFLE SLAB

VARIESMILLWORKCEILINGPANELS

6'-6" AFF

6'-0" AFF

7'-6" AFF

10' - 0"

7'-6" AFF

7'-6" AFF

7'-6" AFF

7'-6" AFF

7'-6" AFF7'-6" AFF

7'-6" AFF

7'-6" AFF

7'-6" AFF

7'-6" AFF

8'-0" AFF

8'-0" AFF

8'-0" AFF

8'-0" AFF

8'-0" AFF

8'-0" AFF

7'-0" AFF

7'-0" AFF7'-0" AFF

7'-0" AFF

8'-6" AFF

8'-6" AFF

8'-6" AFF

8'-6" AFF

8'-6" AFF

8'-0" AFF

8'-0" AFF7'-6" AFF

8' - 0"

07

F11C

F11C

8'-0" AFF

7'-0" AFF

F8

F8

10

10

F13

F13

F13

F13

F13

8' - 0"

4' - 0"

4' - 0"

8' - 0"

6' - 0"

11

11

11

11

11

04

3' - 0"

6' - 0"

6' - 0"

2' - 0"

3' - 0"

6' - 0"

ST-1

8' - 0"ST-1

13 TYP.

8' - 0"ACT-2

02

02

F13

4' - 0"

F12

F12

F12

+6'-6" AFF

+6'-6" AFF

+6'-6" AFF11

1'-6".

1'-2".

2A12.10

2A12.42

________________

3A12.42

________________

4A12.42

________________

EQEQ

EQEQ

EQ

EQ

EQ

EQ

2' - 6"

F134' - 0"

11

Date

Scale

© Gensler

Seal / Signature

Description

Project Number

Project Name

Description

SHEET NOTES

2015




Tel 415.433.3700Fax 415.836.4599



Lic. No. AA0002837

As indicated

\\gen

sler.a

d\pro

jects\

Revit

User

Mode

ls\18

482\C

ENTR

AL_7

9.012

6.000

_RVT

14_V

era F

erna

ndez

-Ville

gas.r

vt


A04.03THIRD FLOOR REFLECTED CEILING PLAN

79.0126.000


SCALE: 1/8" = 1'-0"THIRD FLOOR REFLECTED CEILING PLAN1

01 F3 COVE LIGHT.02 F10 FIXTURE TO BE INSTALLED AT

UNDERCABINET IN COPY ROOM.03 CEILING TO BE OPEN TO ABOVE IN THIS AREA.

INSTALL BAFFLES AS INDICATED, BOTTOM OFBAFFLE TO ALIGN WITH ADJACENT CEILINGPLANE.

04 GYP BOARD HEADER AT OFFICE FRONT SYSTEM-ELEVATION 8'-0" (TYP.)

05 DRAPERY POCKET.06 SWING- PROVIDE ANCHOR SUPPORT INTO

WAFFLE SLAB. SEAT TO BE AT 21" AFF.07 SHADED AREA REPRESENTS EXPOSED WAFFLE

SLAB CEILING. CONTRACTOR TO VERIFY GRIDDIRECTION AND NOTIFY ARCHITECT OF ANYCONFLICTS WITH CEILING DESIGN INTENT.

08 EDGE OF CEILING TO ALIGN WITH DOOR EDGE.09 MOUNT F9 SCONCE 5'-6" AFF, TYP.10 MOUNT F8 SCONCE 5'-6" AFF, TYP.11 BOTTOM OF F13 FIXTURE AT 8'-6" AFF, TYP.

ARCHITECT TO COORDINATE FINAL LOCATION INFIELD WITH CONTRACTOR.

12 CEILING TO RECEIVE P-4 FINISH.13 ARCHITECT TO LOCATE FINAL PLACEMENT OF F7

FIXTURES AT MILLWORK CEILING WITHCONTRACTOR IN FIELD.

14 MOUNT WALL SCONCE 48" AFF.15 MOUNT WALL SCONCE 60" AFF.16 REFER TO SHEET A12.43 FOR ADDITIONAL

INFORMATION ON CEILING IN THIS AREA.17 HOLD CEILING PLANE 6" FROM FACE OF COLUMN.18 CEILING TRACK FOR DRAPERY- FLUSH WITH

CEILING- ALIGN AS SHOWN.19 EDGE OF CEILING TO ALIGN WITH EDGE OF DOOR

FRAME.

A. ARCHITECTURAL DRAWINGS ONLYINDICATE LOCATIONS OF ELECTRICAL,MECHANICAL, FIRE PROTECTION,AUDIO-VISUAL AND SECURITY DEVICES.FOR SPECIFICATIONS AND DESIGN OFTHESE SYSTEMS REFER TO THEENGINEERING AND/OR CONSULTANTDRAWINGS. ELECTRICAL CONTRACTORSHALL BE RESPONSIBLE FORVERIFYING ALL EXISTING CONDITIONS,FOR COMPLYING WITH ALL APPLICABLECODES, FOR PROPER SIZING ANDCIRCUITING OF WORK AND FORPROVIDING RECORD "AS-BUILT"DRAWINGS.

B. VERIFY FIELD CONDITIONS ANDLOCATIONS OF ALL PLUMBING,DUCTWORK, STRUCTURAL ELEMENTSAND OTHER APPLICABLE ITEMS.ARRANGE AND MODIFY NON-VISIBLEITEMS TO INSURE ADEQUATECLEARANCES FOR CEILING MOUNTEDDEVICES AND FOR CEILING LAYOUT ASINDICATED.

C. MOUNT STANDARD SWITCHES ASINDICATED ON THE STANDARDMOUNTING HEIGHT ELEVATIONS ONSHEET A00.01, U.N.O.

D. INDICATED DIMENSIONS ARE TO THECENTERLINE OF A SINGLE SWITCH ORTO THE CENTERLINE OF A CLUSTER OFSWITCHES, U.N.O.

E. INSTALL SWITCHES ON OPPOSITESIDES OF PARTITIONS IN SEPARATESTUD CAVITIES, UNLESS OTHERWISENOTED. DO NOT INSTALLBACK-TO-BACK.

F. PROVIDE MATCHING "LEVITON DECORASERIES" TYPE COVER PLATES,SWITCHES AND RELATED ITEMS,COLOR: WHITE, UNLESS OTHERWISENOTED. PROVIDE ALL DEVICES UNDERA COMMON FACEPLATE, U.N.O.

G. ALL STROBE, SPEAKER/STROBE ANDVISUAL ALARM DEVICE LOCATIONSINDICATED ON THE ARCHITECTURALDRAWINGS ARE FOR DESIGN INTENT.SUBMIT "SHOP DRAWING" TOARCHITECT AND ENGINEER FORREVIEW PRIOR TO START OF WORK.

H. LOCATE HVAC DIFFUSERS/REGISTERSAND LIGHTING FIXTURES WITHIN GRIDLINES, UNLESS OTHERWISE NOTED.LOCATE SPRINKLER HEADS,SPEAKERS, RECESSED LIGHTFIXTURES AND OTHER CEILINGDEVICES IN THE CENTER OFACOUSTICAL CEILING UNITS, U.N.O.

I. FINISH OF HVACDIFFUSERS/REGISTERS, LIGHT FIXTURETRIM, DRAPERY POCKETS, SPEAKERGRILLES AND OTHER CEILINGMOUNTED DEVICES TO MATCH CEILINGGRID FINISH, U.N.O.

J. WHERE EXISTING ACCESS PANELSCONFLICT WITH CONSTRUCTION,RELOCATE PANELS TO ALIGN WITH ANDFIT WITHIN NEW CONSTRUCTION.(REVIEW WITH ARCHITECT IN THEFIELD.)

K. REFER TO SHEETS A00.10, A00.30 ANDA00.50 FOR PROJECT INFORMATION,ADDITIONAL GRAPHIC SYMBOLS,ABBREVIATIONS, GENERAL NOTES ANDDOOR SCHEDULES.

L. GRAY SHADED AREAS INDICATE AREASNOT IN SCOPE OF WOR; OTHERDISCIPLINES MAY PASS THROUGH OREXTEND INTO THESE AREAS, GC TOCOORDINATE.

M. REFER TO ENGINEERING DRAWINGSFOR LIGHT FIXTURE DESIGNATIONSAND SCHEDULE, AND EGRESS ANDEMERGENCY LIGHTING.

N. G.C. SHALL CONFIRM COMPATIBILITYOF ALL CEILING ACCESSORIES,DEVICES, TRIM KITS, DIFFUSERS,GRILLES, ETC. WITH CEILING GRIDSYSTEM.

O. ALL GWB CEILINGS TO RECEIVE P-3FINISH, U.N.O.

P. REFER TO SHEET A00.31 FORSCHEDULE OF FINISHES.

RCP NOTES

SCALE: 1/4" = 1'-0"CONFERENCE AND TEAMING AREA ENLARGED RCP3

SCALE: 1/4" = 1'-0"RECEPTION AND PANTRY ENLARGED RCP2

02.06.2015 ISSUE FOR PERMIT AND BID2 02.20.2015 MEP COORDINATION REV.3 04.17.2015 LIGHTING VE REVISION

3

LIGHTING FIXTURE SCHEDULE

TYPE DESCRIPTION MANUFACTURER MODEL COMMENTS

F1A 2 X 4 FLOURESCENT FIXTURE FOCALPOINT FLU -24-PS-2-T8-IC-UNV-S-G-FW-WH

F1B 4' LONG IN WAFFLE CEILING LEDLUMINAIRE

FOCALPOINT FSM4LS FL 625LF 35K 1C UNVLD1 C24 ** 4'

F2 6" ROUND FLOURESCENTDOWNLIGHT

FOCALPOINT FC6D 26TT UNV RO T L830 D6RO DN CD WP

F3 LINEAR COVE LIGHT ECOSENSE INT3P-A-ALDR-120-10F4 DECORATIVE PENDANT MEDIALIGHT SPRING SO 55 - CHROME

FINISHCHROME FINISH

F6 DECORATIVE PENDANT FOSCARINI FORK XL IVORY PURCHASEDIRECT

F7 CABLE PENDANT CB2 UTILITY GRAPHITE GREY /EDISON BULB

EDISON BULB

F8 PANTRY SCONCE MASIERO NEW DRYLIGHT OUTDOORWALL A2

F9 WALL MOUNTED ADJUSTABLELIGHT IN OFFICE

FOSCARINI FORK WALL IVORY/IVORY PURCHASEDIRECT

F11A LARGER SIZE DECORATIVEGLOBE MIRROR/CLEAR PENDANT

VISO GM.07.122.E26

F11B MEDIUM SIZE DECORATIVEGLOBE MIRROR/CLEAR PENDANT

VISO MM.07.121.E26

F11C SMALLER SIZE DECORATIVEGLOBE MIRROR/CLEAR PENDANT

VISO BM.07.120.E26

F12 PEDANT AT CAFE TABLES VARALUZ SALE CLOUT FLYTRAP 1F13 SLIM INDIRECT LINEAR PENDANT,

CABLE HUNGZUMTOBEL SLD-1-PD-2-7-0-935-04-N-*-U-*

F15 PHONE ROOM WALL SCONCE INGO MAR LUCELLINO LT WALL LAMPF16 LED TO ILLUMINATE FRONT DESK ECOSENSE WWIS-48-KK-XXX-YYF17 CAN PENDANT AT EXPOSED

CEILINGPHILIPS -LIGHTOLIER

OM6 42PLT PC WB CSFF U FINISH WHITE

Building 2Office Building Coral Gables

Reflected Ceiling Plan Furniture Plan

Elevations

Building 3Office Building DoralDoral Concourse8400 NW 36th Street, Doral, FL 33166

Details Class A Office BuildingRentable Buig Area: 245,803 SFYear Built: 2001Parking Spaces: 1231 5.13/1,000 SF Parking Ratio

Building 3Office Building Doral

Exterior North Elevation

Floorplan

Exterior East Elevation

Reflected Ceiling Plan

1. Research to be more focused on an specific workplace sector, i.e. Tech/Creative Companies, Profesional Services Firms, etc.

• Allow us to have a comparison point between case studies.

• Organize the colection of samples• Known field of design

2. Get more articles that expand the research topic.

• The Literature research schedule allowed to research just a few articles related with the topic of investigation. =

3. Study the evolution of workplace through the history.

Research ThoughtsOver the Summer

• Continue developing an understanding of how technology is affecting workplace today and how will affect it in a future

• Create a design program that is flexible enough to support new workmodes and technology advances

• Use the outcomes from previous and current investigation to drive the design solutions.

Goals for the upcoming semester

Interior Design and Technology Advances in the Workplace. Privacy, Collaboration, and WellbeingGroup 7: Workplace | Ramiro Exposito | Leandro Lujan

THANK YOU!

Interior Design and Technology Advances in the Workplace ... · installation. 09 paint ceiling pt04...

Documents

Transcript of Interior Design and Technology Advances in the Workplace ... · installation. 09 paint ceiling pt04...