Interface and application programming (apr 4)
11
Fab academy 2012 CLASS 11: Interface and Application Programming (Apr UNIVERSIDAD NACIONAL DE INGENIERÍA FACULTAD DE ARQUITECTURA, URBANISMO
-
Upload
arongonzalesarnao -
Category
Technology
-
view
171 -
download
1
description
WALTER GONZALES ARNAO
Transcript of Interface and application programming (apr 4)
Fab academy 2012
CLASS 11: Interface and Application Programming (Apr 4)STUDENT: WALTER HECTOR GONZALES ARNAO
UNIVERSIDAD NACIONAL DE INGENIERÍAFACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab academy
summary This week we worked on the board Sensory Input (Phototransistor). The exercise consists in modifying the original code: http://fab.cba.mit.edu/about/fab/hello/light/hello.light.45.pyFor this purpose the USB port must recognize, the board Sensory Input.In python code be amended, after having fallen1. Install (ActiveTcl) http://www.activestate.com/activetcl/activetcl-8-62. Install (ActivePython) http://www.activestate.com/activepython-33. Install (Active Serial) http://sourceforge.net/projects/pyserial/then run the code in python, and amending, in my case I will use a traditional perunao textile fonde CLASS 11: INTERFACE AND APPLICATION PROGRAMMING (Apr 4)
UNIVERSIDAD NACIONAL DE INGENIERÍAFACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab academy
FIRST STEP. WILL WORK WITH THE PAST YEAR CARDCLASS 10: INPUT DEVICES (mar 28)
UNIVERSIDAD NACIONAL DE INGENIERÍAFACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab academy
FIRST STEP. WILL WORK WITH THE PAST YEAR CARDCLASS 10: INPUT DEVICES (mar 28)
UNIVERSIDAD NACIONAL DE INGENIERÍAFACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab academy2012STEP TWO. ATTEMPT TO SET IN AVR STUDIO, THAT LOW INTERNET
To runCLASS 10: INPUT DEVICES (mar 28)
UNIVERSIDAD NACIONAL DE INGENIERÍAFACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab academy2012STEP THREE. RESPONDIA NOT BECAUSE THE ERROR WAS ON THE
CARD THAT TRACKS missing that will link the PUSH CLASS 10: INPUT DEVICES (mar 28)
UNIVERSIDAD NACIONAL DE INGENIERÍAFACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab academy2012STEP THREE. RESPONDIA NOT BECAUSE THE ERROR WAS ON THE
CARD THAT TRACKS missing that will link the PUSH CLASS 10: INPUT DEVICES (mar 28)
UNIVERSIDAD NACIONAL DE INGENIERÍAFACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab academy2012STEP THREE. RESPONDIA NOT BECAUSE THE ERROR WAS ON THE
CARD THAT TRACKS missing that will link the PUSH CLASS 10: INPUT DEVICES (mar 28)
UNIVERSIDAD NACIONAL DE INGENIERÍAFACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab academy2012STEP THREE. RESPONDIA NOT BECAUSE THE ERROR WAS ON THE
CARD THAT TRACKS missing that will link the PUSH CLASS 10: INPUT DEVICES (mar 28)
UNIVERSIDAD NACIONAL DE INGENIERÍAFACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab academy2012STEP THREE. RESPONDIA NOT BECAUSE THE ERROR WAS ON THE
CARD THAT TRACKS missing that will link the PUSH CLASS 10: INPUT DEVICES (mar 28)
UNIVERSIDAD NACIONAL DE INGENIERÍAFACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab academy2012STEP 8.SE turned on the LET
CLASS 10: Embedded Programming UNIVERSIDAD NACIONAL DE INGENIERÍAFACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Conclusions.conclusions1. The construction of the card with the microcontroller and the light sensor is simple, however because we weld the parts. All information take it from the tutorials 2. The second part is complicated by the programming of the microcontroller, which was displayed not bar recognition of the sensor in your computer monitor.3. I asked for help to our colleagues, for the programming, the support that but I was Henrry.
