Intensifier K 20160923 Rev.1(미정)...instruction manual iqwhqvlÀhu . shulhv 4qfdp 5fdiopmphjft jt...

INSTRUCTIONMANUAL

I S

HTINT70K(Bullet Camera)

HTINT60K(Turret Camera)

HTINT59K(Dome Camera)

HTINT40K(Miniature Camera)

Contents

1

Contents ...................................................... 1

Precautions ................................................. 2, 3

Safety Instructions ...................................... 4

Package Contents ....................................... 5

Camera Installation ..................................... 6-12

Lens Adjustment ......................................... 13-16

.............................................. 17-20

Camera Dimension ..................................... 21-22

Features ...................................................... 23

OSD Menu Details ...................................... 24-46

Trouble Shooting ......................................... 47

2

PrecautionsDo not install the camera inextreme temperature conditions.

Do not touch the front lens of thecamera.

Never keep the camera pointeddirectly at strong light.

Do not expose the camera toradioactivity.

Do not install the camera underunstable lighting conditions.

Do not drop the camera or subjectit to physical shocks.

Only use the camera under conditionswhere temperatures are between -10°C and +50°C. Be especially careful to provide ventilation when operating under high temperatures.

This is one of the most important parts of the camera. Be careful not to leavefingerprints on the lens cover.

It can cause malfunctions to occur. If exposed to radioactivity the CCDwill fail.

Severe lighting change or flicker cancause the camera to work improperly.

Housing damage can compromise weatherproof ratings.

NOTE

* If the camera is exposed to spotlight or object reflecting strong light,

smear or blooming may occur.

* please check that the power satisfies the normal specification before

connecting the camera.

4

Safety Instructions

There are no user serviceable parts inside Do not disassemble this camera other than to make initial adjustments Use a UL approved regulated 24 volt AC or 12 volt DC power supply Please insure that your installation area can support the weight of the camera

Do not use a strong or abrasive detergent when cleaning the camera Do not install near cooling or heating device

5

Package Contents

Please make sure that the following items are included in the Package:

1) HTINT70K 1 ideo Test Connector, ower ack 1 ocus djustment 1 Bracket Base 1 rench et crew 4 Tapping crews 4x 5 4 Hexagon ocket crews M5x10

) HTINT60K

1 ideo Test Connector, ower ack renches et crew Tapping crews 4x 5 3) HTINT59K 1 ideo Test Connector, ower ack 1 Chameleon Co er 1 rench et crew 3 Tapping crews 3.5x 0

4) HTINT40K 1 ideo Test Connector, ower ack et crew Tapping crews M3x10 Machine crews M x3

6

CAMERA INSTALLATION

7

CAMERA INSTALLATION

Compatibility

1) HTINT70K

) HTINT60K

CVCJBB INTJBS INTCM

CVCJBD

Adaptor plate(60PLATE) with rubber

8

CAMERA INSTALLATION

Compatibility

3) HTINT59KCVCJBD

Adaptor plate(59PLATE) with rubber

CAMERA INSTALLATION

9

C TI N The installation instructions in this manual are for use by ualified ser ice personnel only. To reduce the risk of electric shock, do not perform any ser icing other than that contained in the operating instructions unless you are qualified to do so.

3AXIS BRACKET

SCREW TS T1, 4X25, TH, SUS, 4EA

SCREW M5X10, HEXAGON SOCKET, SUS, BK, 4EA

WALL

1. HTINT70K

CAMERA INSTALLATION

10

2. HTINT60K

BALL DOME BASE

BALL DOME BODY

BALL DOME

SCREW TS T1, 4X25, TH, SUS, 3EA

CAMERA INSTALLATION

11

3. HTINT59K

VANDAL DOME BASE

VANDAL DOME BODY

BODY OUTER COVER SPECO

SCREW TS T1, 3.5X20, PH, SUS, 3EA

12

1. HTINT70K

LENS ADJUSTMENT

Focus adjustment

Open the cap

Lock screwZoom adjustment

13

2. HTINT60K

LENS ADJUSTMENT

Focus adjustment

Lock screw

Zoom adjustment

14

3. HTINT59K

LENS ADJUSTMENT

Focus adjustmentZoom adjustment

Open the cap

15

Image SensorResolutionEffective PixelsTotal PixelsScanning SystemS/N RatioFrame rateVideo OutputMinimum IlluminationLENSElectronic Shutter SpeedOSDBLCHSBLCWDR (Wide Dynamic Range)Digital WDRDay&NightWhite BalanceSmart-IRSense-UpMotion DetectionMotion Tracking (Quick Zoom)OSD output for Anti ShiftingOSD output for Anti Blocking3D DNRDefogBrightnessAGCPrivacy MaskingMirror / V-FLIPSharpnessLensShading Compensation (LSC)RS-485(Protocol)View AngleCVBS OUTPUTCommunicationLanguagePower Supply

Operating TemperatureLensDimension

1/3" 1.3MP SONY Sensor1000TV Lines1305(H) X 1049(V), 1.37M Pixels1312(H) X 1069(V), 1.40M PixelsProgressive ScanMore than 50dB MAX 50P/60PCVBS : 1.0Vp-p/75 Ohm0Lux(Intensify x64)DC/MANUALAUTO / Manual(1/60Sec ~ 1/60000Sec) / FLICKERBuilt-inOOON(LOW,MIDDLE,HIGH) / OFF ON(LOW/MIDDLE/HIGH) / OFFColor / BW / EXTERN / Auto AATW / AWB / AWC -> SET / MANUAL0~20(Level Adjustable), Default : 0x2 ~ x64, Default : x16ON / OFF (Programmable 4 Zones)ON/OFFON/OFFON/OFFOFF/LOW/MIDDLE/HIGHON(AUTO/MANUAL) / OFF0~20 (Level Adjustable), Default : 100~20 (Level Adjustable), Default : 15ON / OFF (Programmable 16 Zones)ON/OFF0~10 (Level Adjustable), Default : 7ON/OFFAvailableWIDE 4:3 / Normal / WIDE 16:9NTSC / PAL selectableCoaxial ControlEnglish DC12V/AC24V Dual Voltage Operation

-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)Storage Temperature -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)

DC Auto Iris Varifocal Lens(2.8mm-12mm)3.94"(W) * 3.94"(H) * 8.27"(D)

Power Consumption DC 12V 590mA / AC 24V 350mA

Weight 3.09 Ibs

HTINT70K

64

SPECIFICATIONS

Intensifier K SeriesDC uto Iris arifocal ens . 1 mm

16

Image SensorResolutionE ective PixelsTotal PixelsScanning SystemS/N RatioFrame rat eVideo OutputMinimum Illuminatio nLENSElectronic Shutter Spee dOSDBLCHSBLCWDR (Wide Dynamic Range )Digital WD RDay&NightWhite Balanc eSmart-I RSense-UpMotion DetectionMotion Tracking (Quick Zoom)OSD output for Anti ShiftingOSD output for Anti Blocking3D DN RDefo gBrightnessAGCPriv acy MaskingMirror / V-FLI PSharpnessLensShading Compensation (LSC)RS-485(Protocol)View AngleCVBS OUTPU TCommunicationLanguagePower Suppl y


1/3" 1.3MP SONY Sensor 1000TV Line s1305(H) X 1049(V) , 1.37M Pixel s1312(H) X 1069(V) , 1.40M Pixel sProgressive Sca nMore than 50dB MAX 50P/60PCVBS : 1.0Vp-p/75 Oh m0Lux(Intensify x64)DC/MAN UALAUTO / Manual(1/60Sec ~ 1/60000Sec) / FLICKE RBuilt-i nOOON(LOW ,MIDDLE,HIGH) / OFF ON(LOW/MIDDLE/HIGH) / OFFColor / BW / EXTERN / AutoATW / AWB / AWC - > SET / MAN UAL0~20(Level Adjustable), Default : 0x2 ~ x64, Default : x16ON / OFF (Programmable 4 Zones)ON/OFFON/OFFON/OFFOFF/LOW/MIDDLE/HIGHON(A UTO/MANU AL) / OFF0~20 (Level Adjustable), Default : 100~20 (Level Adjustable), Default : 15ON / OFF (Programmable 16 Zones)ON/OFF0~10 (Level Adjustable), Default : 7ON/OFFAvailableWIDE 4:3 / Normal / WIDE 16: 9NTSC / P AL selectabl eCoaxial ControlEnglishDC12V/A C24V Dual Voltage Operatio n

-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH )Storage Temperature -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH )

DC Auto Iris Varifocal Lens(2.8mm-12mm)4.65"(Dia) * 3.80"(H)

Power Consumption DC 12V 570mA/AC 24V 350m A

Weight 1.99 Ibs

HTINT60K

64

SPECIFICATIONS


17

Image SensorResolutionEffective PixelsTotal PixelsScanning SystemS/N RatioFrame rateVideo OutputMinimum IlluminationLENSElectronic Shutter SpeedOSDBLCHSBLCWDR (Wide Dynamic Range)Digital WDRDay&NightWhite BalanceSmart-IRSense-UpMotion DetectionMotion Tracking (Quick Zoom)OSD output for Anti ShiftingOSD output for Anti Blocking3D DNRDefogBrightnessAGCPrivacy MaskingMirror / V-FLIPSharpnessLensShading Compensation (LSC)RS-485(Protocol)View AngleCVBS OUTPUTCommunicationLanguagePower Supply


1/3" 1.3MP SONY Sensor 1000TV Lines1305(H) X 1049(V), 1.37M Pixels1312(H) X 1069(V), 1.40M PixelsProgressive ScanMore than 50dB MAX 50P/60PCVBS : 1.0Vp-p/75 Ohm0Lux(Intensify x64)DC/MANUALAUTO / Manual(1/60Sec ~ 1/60000Sec) / FLICKERBuilt-inOOON(LOW,MIDDLE,HIGH) / OFF ON(LOW/MIDDLE/HIGH) / OFFColor / BW / EXTERN / AutoATW / AWB / AWC -> SET / MANUAL0~20(Level Adjustable), Default : 0x2 ~ x64, Default : x16ON / OFF (Programmable 4 Zones)ON/OFFON/OFFON/OFFOFF/LOW/MIDDLE/HIGHON(AUTO/MANUAL) / OFF0~20 (Level Adjustable), Default : 100~20 (Level Adjustable), Default : 15ON / OFF (Programmable 16 Zones)ON/OFF0~10 (Level Adjustable), Default : 7ON/OFFAvailableWIDE 4:3 / Normal / WIDE 16:9NTSC / PAL selectableCoaxial ControlEnglishDC12V/AC24V Dual Voltage Operation

Power Consumption IR LED ON : DC 12V 750mA/AC 24V 165mA, IR LED OFF : DC 12V 400mA/AC 24V 95mA

-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)Storage Temperature -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)

DC Auto Iris Varifocal Lens(2.8mm-12mm)5.31"(W) * 3.74"(H) * 11.57”(D)

Weight 3.96 Ibs

HTINT59K

64

SPECIFICATIONS


18

Image SensorResolutionEffective PixelsTotal PixelsScanning SystemS/N RatioFrame rateVideo OutputMinimum IlluminationLENSElectronic Shutter SpeedOSDBLCHSBLCWDR (Wide Dynamic Range)Digital WDRDay&NightWhite BalanceSmart-IRSense-UpMotion DetectionMotion Tracking (Quick Zoom)OSD output for Anti ShiftingOSD output for Anti Blocking3D DNRDefogBrightnessAGCPrivacy MaskingMirror / V-FLIPSharpnessLensShading Compensation (LSC)View AngleCVBS OUTPUTCommunicationPower Supply

LensDimension

1/3" 1.3MP SONY Sensor 1000TV Lines1305(H) X 1049(V), 1.37M Pixels1312(H) X 1069(V), 1.40M PixelsProgressive ScanMore than 50dB MAX 50P/60PCVBS : 1.0Vp-p/75 Ohm0.00001LuxDC/MANUALAUTO / Manual(1/60Sec ~ 1/60000Sec) / FLICKERBuilt-inOOON(LOW,MIDDLE,HIGH) / OFF ON(LOW/MIDDLE/HIGH) / OFFColor / BW / EXTERN / AutoATW / AWB / AWC -> SET / MANUAL0~20(Level Adjustable), Default : 0x2 ~ x64, Default : x16ON / OFF (Programmable 4 Zones)ON/OFFON/OFFON/OFFOFF/LOW/MIDDLE/HIGHON(AUTO/MANUAL) / OFF0~20 (Level Adjustable), Default : 100~20 (Level Adjustable), Default : 15ON / OFF (Programmable 16 Zones)ON/OFF0~10 (Level Adjustable), Default : 7ON/OFFWIDE 4:3 / Normal / WIDE 16:9NTSC / PAL selectableCoaxial ControlDC12V

Power Consumption 120mA3.6mm Fixed Board Lens1.34"(W) * 1.34"(H) * 0.65”(D)

Weight 0.66 Ibs

HTINT40K

SPECIFICATIONS

Intensifier K Series3.6mm ixed Board ens

19

CAMERA DIMENSION

1) HTINT70K

3.94” dia3.38”

8.27”4.80”

2.95”

3.01”

3.46”

) HTINT60K

4.65” dia

3.80”

2.66”

3.01”

20

CAMERA DIMENSION

3) HTINT59K

4) HTINT40K

4.72”

dia 3.3

5”

1.82”

3.23” dia

1.34” 0.65”

1.02”

1.34

”

21

General Features

1000 T ines1.3 M HD N 1000 T combined with N M N (IM 13 )

D ( ide Dynamic ange) powerful and ultra ad anced technology that captures cleaner and superior high resolution picture

e en where images appear dark because there is a strong back light present.

T reset (Indoor, utdoor, ow light, Hallway, obby, le ator) is pro ided to maximi e user con enience.

DN (Digital Noise eduction)M T 3D DN pre ents the image blurring of mo ing objects and acti ates only when mo ing

objects appear on the scene.

M T INo saturation image, i id image in darkness. it makes ery sharp ideo image in darkness.

This technology eliminates saturation of ideo image of the closer object in darkness by control

of the I sensiti ity.

INT N IINT N I Max. up to x64 helps get dark images isible and make it clear images in a low

light en ironment.

DDefog function impro e the clarity of images taken in poor conditions such as fog, smoke, rain

or snow.

C B (Composite ideo Blanking and ync)T ystem is switchable into NT C or with built in D.

INT I NCn extraordinary technology enables to become an ultimate analog solution by pro iding

intelligent features based on motion tracking. it strengthens crime pre ention detection.

22

Setup Menu

How to Set Up the camera menu

PRESET MODE MENU

LENS

EXPOSURE

WHITE BAL

BLACKLIGHT

DNR

DAY&NIGHT

DC

MANUAL

ATWAWBAWC -> SETMANUAL

OFFHLC

BLC

WDR

OFFLOWMIDDLEHIGHAUTO

COLORB/W

EXTERN

MODERETURNMODERETURNBRIGHTNESSSHUTTER

INTENSIFYAGCRETURN

KELVINR-GAINB-GAINRETURN

LEVELMODERETURNH-POSV-POSH-SIZEV-SIZERETURNWEIGHTRETURN

SMART IRAGC THRESAGC MARGINDELAYRETURN

SMART IRRETURNSMART IREXTERN S/WDELAYRETURN

INDOOR / OUTDOOR / DEBLUR

NORMAL / DEBLUR

0 ~ 20AUTOMANUAL

FLICKEROFF / X2 ~ X640 ~ 20

LOW / MIDDLE / HIGH0 ~ 200 ~ 20

0 ~ 20ALL DAY / NIGHT ONLY

0 ~ 200 ~ 200 ~ 200 ~ 20

LOW / MIDDLE / HIGH

0 ~ 200 ~ 200 ~ 20LOW / MIDDLE / HIGH

0 ~ 20

0 ~ 20LOW / HIGHLOW / MIDDLE / HIGH

SPEEDRETURN

1/60 ~ 1/60,000

* ixed board lens type camera is a ailable for M N option in N menu only.MAIN SETUP

INDOOR OUTDOOR LOW LIGHT HALL WAY LOBBY ELEVATOR PRESET MAIN SETUP RESET

23

Setup Menu


IMAGE

SYSTEM

SHARPNESSGAMMAPEDSTALCOLOR GAINMIRRORFLIPRETURNVIEW ANGLE

CVBSLANGUAGE

0 ~ 100.45 ~ 0.650 ~ 200 ~ 20OFF / ONOFF / ON

WIDE 4 : 3WIDE 16 : 9NORMALNTSC / PALENG / CHN / CHN(S) / JAN / KOR

XY ADJUSTXY ADJUST

SPECIAL

RETURND-ZOOMD-WDRDEFOG

SHADING

PRIVACY

INTELLIGENT

1.0X ~ 8.0XOFF / LOW / MIDDLE / HIGHOFFON

OFFON

OFFON

MTN TRACKER

ALARM

MODE

LEVEL

RETURN

WEIGHTRETURN

ZONE NUMZONE DISPH-POSV-POSH-SIZEV-SIZEY LEVELCR LEVELCB LEVELRETURNON

ANTI-SHIFTSHIFT SCALEANTI-BLOCK

AUTOMANUALLOWMIDDLEHIGH

0 ~ 100%

0 ~ 15ON / OFF0 ~ 400 ~ 320 ~ 400 ~ 320 ~ 200 ~ 200 ~ 20

DET. SETTING

WINDOW TONEWINDOW ZONEWINDOW USEDET H-POSDET V-POSDET H-SIZEDET V-SIZERETURNOFF / ON0 ~20OFF / ON

SENSITIVITYOBJ KEEPMOTION ESTSIGNAL OUTRETURN0 ~60 ~ 3OFF / ON0 ~ 400 ~ 320 ~ 400 ~ 32

0 ~ 20LV 0 ~ LV 600 ~ 20OFF / ON

24

Setup Menu


RETURN

ALARM

QUICK ZOOM

ANTI-SHIFTSHIFT SCALEANTI-BLOCKBLOCK SCALERETURNMOVINGZOOM INSTANDBYSYNCHRONOUSTRACKINGREPEATRETURN

OFF / ON0 ~20OFF / ON0 ~ 20

0 ~ 240 sec0 ~ 240 sec0 ~ 240 secOFF / ONOFF / ONOFF / ON

RETURN

25

MENU Menu setting can be selected by the button inside the camera.

1. ress the set button.

* M N will be displayed on the monitor.

M N

T reset is pro ided to maximi e user con enience.

( T Indoor utdoor ow light Hallway obby le ator )

Mo e D joystick into left or right on IT, then T menu shows up.

ress the button for 3 seconds to reset.

SPECO TECH1. PRESET2. MAIN SETUP3. EXIT

INDOOR

SPECO TECHINDOOR 1. PRESET

2. MAIN SETUP3. EXIT


INDOOR


INDOOR

M IN T nter the M IN T to adjust further settings.

26

Menu setting can be selected by the button inside the camera.

1. ress the set button.

* The et p menu will be displayed on the monitor.

. Mo e and select the required function using the p and Down button.

* Mo e the triangular indicator p or Down to select the desired feature by pressing

the p or Down button.

MENU SETUP

MENU1. LENS2. EXPOSURE3. WHITE BAL4. BACKLIGHT5. SPECO DNR6. DAY&NIGHT7. IMAGE8. SYSTEM9. SPECIALRETURN

DC

ATWOFFMIDDLEAUTO


DC

ATWOFF MIDDLEAUTO

27

3. Change menu settings using the eft or ight button.

* ailable alues or tatus are displayed by pressing the eft or ight buttons.

ress the button until desired alue status is displayed.

4. fter Changing the setting mo e the arrow indicator to T N and press the

T button to T N.

This function is to adjust the brightness of the monitor.

1. Mo e the triangular indicator to N using the p and Down buttons on the et p menu screen.

. elect the desired lens type by pressing the eft of ight button.

* ixed board lens type camera is a ailable for M N option in N menu only.

NOTE

* Mo e to the a ailable submenu by mo ing arrow to desired feature.

* ubmenu is not a ailable when this symbol displayed .

1. LENS

MENU MENU1. LENS2. EXPOSURE3. WHITE BAL4. BACKLIGHT5. SPECO DNR6. DAY&NIGHT7. IMAGE8. SYSTEM9. SPECIALRETURN

1. LENS2. EXPOSURE3. WHITE BAL4. BACKLIGHT5. SPECO DNR6. DAY&NIGHT7. IMAGE8. SYSTEM9. SPECIALRETURN

DC

ATWOFFMIDDLEAUTO

MANUAL

ATWOFFMIDDLEAUTO

28

B I HTN It is used to adjust o erall brightness le el.

( B I HTN 0 0 default alue 10 )

n this manu, users can control exposure by selecting one of modes (Brightness, hutter, ens up, C)

1. Mo e the triangular indicator to on the T menu screen using the p and Down button

. elect the desired mode using the eft or ight buttons.

2. EXPOSURE

NOTE

* n DC mode, you can select IND , TD , or D B depending on the

installation en ironment.

* n M N mode, you can select N M or D B depending on the

installation en ironment.

2. EXPOSURE

BRIGHTNESSSHUTTERINTENSIFYAGCRETURN

AUTOX16

IIIIIIIIII IIIIIIIIII| 10



DC

ATWOFFMIDDLEAUTO

29

SHUTTER

SPEEDRETURN

1/60

2. EXPOSURE

BRIGHTNESSSHUTTERINTENSIFYAGCRETURN

MANUALX16



H TT sers adjust electronic shutter speed by selecting one of modes( T , M N , ICK ).

INT N I The brighter image can be displayed by operating digital slow shutter speed in low light en ironment.

( digital slow shutter x x64 default alue x16)

C the brighter image can be displayed by adjusting C( uto ain Control) le el.

( C 0 0 default 15 default alue 15 )

Manaul mode shutter speed is adjustable from 1 60 up to 1 60,000.

2. EXPOSUREBRIGHTNESSSHUTTERINTENSIFYAGCRETURN

MANUALX16



2. EXPOSUREBRIGHTNESSSHUTTERINTENSIFYAGCRETURN

MANUALX16



30

3. WHITE BALANCEse this function when the color adjustment of a screen is needed.

1. Mo e the triangular indicator to HIT B on the T menu screen using the p and Down button.

. elect the desired mode by using the left or ight button.


DC

ATWOFFMIDDLEAUTO

MANUAL

KELVINR-GAINB-GAINRETURN

1010

IIIIIIIIII IIIIIIIIII|IIIIIIIIII IIIIIIIIII|

MIDDLE

se the appropriate mode according to your purposes among these three modes.

T se this mode when the color temperature is from 1, 00K to 10,500K.

B The function to search for the color which is matched well with the ambient en ironment. This

be used when the color temperature is from 3,000K to 7,000K.C T fter letting camera focus on the blank white paper to the best condition of current

lighting en ironment, press the T button. If the lighting condition is changed, e adjustment

should be needed.

M N Manual compensation make the more detailed control possible. irst, after adjusting the

white balance using the T or B mode, change the mode into the manual compensation mode

and then press et button. hile looking at the color change of the subject seen on the screen after

setting up the proper color temperature, increase the each alue of the blue and the red.

31

NOTE

The hite Balance may not be worked properly in the following conditions. If this doesn t

work, use the B mode.hen there is a ery high color temperature in the circumstances of the subject.

( for example, clear sky, unset) It is ery dark.

If the camera is headed to the fluorescent light directly or if there is a drastic lighting

change, The operation of hite balance may become unstable.

4. BACK LIGHTn this menu, back light image can be compensated by users selecting one of modes (H C, B C, and D ).

1. Mo e the triangular indicator to B CK I HT on the T menu screen using the p and Down button

. elect the desired mode using the eft or ight buttons.


DC

ATWOFFMIDDLEAUTO

32

H C (Highlight ight Compensation) hen there is a car head light turned on

at the entrance of the gas station or in some place in the parking lot, the numbers of the car plate

can be recogni ed by blocking only the light from the car headlight. t the area is set up specifically,

you can recogni e the car plate numbers by blocking the strong light signal.

HLC

LEVELMODERETURN

ALL DAYIIIIIIIIII IIIIIIIIII| 10

Normal HLC

BLC

V-POSH-SIZEV-SIZERETURN

7564

B C (Back ight Compensation) The camera with 3D DN pro ides the intelligent light le el control to

o ercome strong backlight conditions.

B C The set up area can be seen i idly by the user who set up the desired area to compensate the

back light directly according to the installation en ironment.

H

H I

I

djust the H(Hori ontal) position of the B C area.

djust the ( ertical) position of the B C area.

djust the H(Hori ontal) si e of the B C area.

djust the ( ertical) si e of the B C area.

33

WDR

WEIGHTRETURN

HIGH

( To adjust D le el, select the , MIDD , HI H by pressing the left or the right button )

WDR OFF WDR ON

34

5. DNRThis function makes the noise of the low light background decrease and is a highlighted feature.

1. Mo e the triangular indicator to DN on the T menu screen using the p and Down button

. elect one of modes( , , MIDD , HI H) to use DN by pressing the ight or eft button.


DC

ATWOFFMIDDLEAUTO

NOTE

* If DN function is acti ated, digital noise om image get reduced.

The higher the compensation proportion raises, the better noise cancellation effect is.

Howe er, high DN alue might cause ghost effect on image to occur.

35

uto utomatically, It shifts into the color mode in the bright en ironment and the B mode in the

low light condition. It can adjust the delay time, starting brightness and end brightness according to the

ambient conditions by pressing the et button.

* M T I It is used to compensate I saturation (0 0)

* C TH C threshold le el (0 0)

* C M IN C D N margin le el (0 0)

6. DAY&NIGHTou can change the color mode of color or black white by setting up the mode.

1. elect D NI HT using the p or Down button on the et p menu screen.

. elect one of modes ( T N, T , C , B ) using the eft or ight buttons.

T it can change into C or B mode automatically through the connection with the ground terminal.

sers can adjust M T I le el (0 0), T N e el, and working time of the D N filter.


DC

ATWOFFMIDDLEAUTO

6. DAY&NIGHT

SMART IREXTERN S / WDELAYRETURN

IIIIIIIIIIIIIIIIIIII 0LOWLOW

| |

6. DAY&NIGHT

SMART IRAGC THRESAGC MARGINDELAYRETURN

IIIIIIIIIIIIIIIIIIII 0 10 10LOW

| |IIIIIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIIIII

||

||

||

36

This can be used when you want to select the additional function control.

1. hen the T menu is displayed, select IM using the p and Down button.

. elect one of the mode using the eft or ight buttons.

7. IMAGE

SHARPNESSGAMMAPEDESTALCOLOR GAINMIRRORFLIPRETURN

0.55

OFFOFF

C Making the ideo output color always.

B Making the ideo output B always. By selecting the color signal n or ff, this lets the burst

signal be disappeared or not.

6. DAY&NIGHT

SMART IRRETURN

IIIIIIIIIIIIIIIIIIII 0| |


DC

ATWOFFMIDDLEAUTO

7. IMAGE

IIIIIIIIII IIIIIIIIII|

IIIIIIIIII IIIIIIIIII|IIIIIIIIII IIIIIIIIII|

7

810

37

IM

H N the outline of an image becomes sharp and more distinct as the le el of sharpness increases.

It has better be used to adjust the alue to the proper one depending on a sort of image.

( H N 0 10 )

MM amma alue is adjustable ( MM 0.45 0.65 )

D T edstal alue is adjustable ( D T 0 0 )

C IN Color gain alue is adjustable ( C IN 0 0 )

MI The image of the monitor is re ersed hori ontally.

I The image of the monitor is re ersed ertically.

38

8. SYSTEMThis can be used when you want to select the additional function control.

1. hen the T menu is displayed, select T M using the p and Down button.



DC

ATWOFFMIDDLEAUTO

8. SYSTEM

8. SYSTEM

VIEW ANGLECVBSLANGUAGERETURN


WIDE 4 : 3 NTSCENG

WIDE 4 : 3 NTSCENG

T M

I N users are able to adjust aspect ratio by selecting ID 4 3 , ID 16 9 or N M

depending on monitor aimed for sur eilance. (default alue ID 4 3

39

SYSTEM


WIDE 16 : 9

ENG

SYSTEM


NORMAL

ENG

C B T system is manually switchable to or NT C on C B (Composite ideo Blanking and ync).

9. SPECIALThis can be used when you want to select the additional function control.

1. hen the T menu is displayed, select CI using the p and Down button.



DC

ATWOFFMIDDLEAUTO

SPECIAL

D-ZOOMD-WDRDEFOGSHADINGPRIVACYINTELLIGENTRETURN

1. 0XOFFOFFOFFOFF

40

CI

D M diginal oom supports up to x a ailable (x1 x )

The higher the digital oom magnification is, the lower the resolution is.

D D This camera which is using 3D DN D pro ides intelligent light le el control to o ercome

e en strong backlight conditions. ( MIDD HI H)

D This function helps to recogni e the object in a foggy or dusty weather condition.

DEFOG ON

DEFOG

MODELEVELRETURN

AUTOMIDDLE

DEFOG OFF

41

H DIN It is used to increase brightness in case angle of lens set as wide cause darker image

on both sides than that on the center.

I C This is used to hide certain areas on the monitor. ou can designate each different 15 area.

The si e of a designated area can be adjusted.

SHADING

WEIGHTRETURN

100%

PRIVACY

ZONE NUMZONE DISPH-POSV-POSH-SIZEV-SIZEY LEVELCR LEVELCB LEVELRETURN

0OFF12233IIIIIIIIII IIIIIIIIII|| |IIIIIIIIII IIIIIIIIII|| |IIIIIIIIII IIIIIIIIII|| |

101010

INT I NT It is used for crime pre ention detection by pro iding intelligent functions based on

motion tracking.

INT I NT (MTN T CK , M, ICK M)

1) MTN T CK it is used to adjust a certain area for motion tracking.

INTELLIGENT

MTN TRACKER OFFALARMQUICK ZOOM OFFRETURN

42

MTN TRACKER

DET. SETTINGWINDOW TONEWINDOW ZONEWINDOW USEDET H-POSDET V-POSDET H-SIZEDET V-SIZERETURN

00OFF121612

) M it is used to set NTI HI T or NTI B CK based on

motion tracking. scale le el of these functions are adjustable

ALARM

ANTI-SHIFTSHIFT SCALEANTI-BLOCKBLOCK SCALERETURN

ON

ONIIIIIIIIII IIIIIIIIII|| |IIIIIIIIII

IIIIIIIIIIIIIIIIIIII| |

10

3

43

* NTI B CK If someone intentionally block the front of camera by hands or spray, etc.,

it will be automatically detected by a warning message(B CKIN D T CT D )

on monitor.

3) ICK M Digital oom in is operated to precisely detect objects when objects get in a designated

motion detection area. The area setting is a ailable on MTN T CK ( . 7).

QUICK ZOOM

MOVINGZOON INSTANDBYSYNCHRONOUSTRACKINGREPEATRETURN

30 / 60 SEC30 / 60 SEC30 / 60 SECOFFOFFOFF

44

10. RETURNMENU

1. LENS2. EXPOSURE3. WHITE BAL4. BACKLIGHT5. SPECO DNR6. DAY&NIGHT7. IMAGE8. SYSTEM9. SPECIALRETURN

DC

ATWOFFMIDDLEAUTO

ress T N button to sa e the current settings and exit the setup menu.

45

Trouble Shooting

PROBLEM

Northing appears onthe screen.

Check the power cable, power supply output and videoconnection between the camera and monitor.

Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth.

Adjust the monitor controls, as required.If the camera is facing a very strong light, change

the camera position.Adjust the lens focus.

Adjust the contrast control of the monitor.

Has MOTION DET been set to ON in the menu?

Check that the AGC setting in the EXPOSURE menu is not set to OFF.Check the EXPOSURE menu and make sure SHUTTER is set to------.

Make sure that the camera isn’t facing direct sunlight or

Check the settings in WHITE BALANCE menu.

Check the camera is correctly connected to an appropriate regulated power source.

The image on thescreen is dim.

The camera is notworking properly

and the surface ofthe camera is hot.

The image on thescreen is dark.

Motion Detectionis not activated.

The color of thepicture is not correct.

The image on the

The INTENSIFY doesnot work.

POSSIBLE CAUSE

47

MEMO

48

MEMO

200 New HighwayAmityville, NY 11701

631-957-87001 800 645 5516

www.specotech.com

Intensifier K 20160923 Rev.1(미정)...instruction manual iqwhqvlÀhu . shulhv 4qfdp 5fdiopmphjft jt...

Documents

Transcript of Intensifier K 20160923 Rev.1(미정)...instruction manual iqwhqvlÀhu . shulhv 4qfdp 5fdiopmphjft jt...