Integrating iBeacons into your appcelerator project using Glimworm Beacons
27
integrating iBeacons into your Appcelerator project J Carter / Glimworm IT BV and.. Glimworm Beacons 5th Feb 2014 Appcelerator Meetup Amsterdam integrating iBeacons into your Appcelerator project Thursday, 6 February 14
-
Upload
jonathan-carter -
Category
Technology
-
view
1.605 -
download
0
description
Presented at the Appcelerator Titanium Amsterdam Meetup on the 5th Feb 2014. Co-founder of GlimwormBeacons Jonathan carter explains how to integrate iBeacon technology into your Appcelerator Titanium projects. Glimworm Beacons is the first mass producer of iBeacon compatible sensors in the Netherlands and The slides explain some of the USPs of the product. Glimworm Beacons is platform agnostic and aims to provide developers with a hardware product to deliver to their clients as opposed to being a solution provider.
Transcript of Integrating iBeacons into your appcelerator project using Glimworm Beacons
integrating iBeaconsinto your
Appcelerator project
J Carter / Glimworm IT BVand.. Glimworm Beacons
5th Feb 2014Appcelerator Meetup Amsterdam
integrating iBeaconsinto your
Appcelerator project
Thursday, 6 February 14
Concepts
•Monitoring
•Ranging
•Advertising
Thursday, 6 February 14
Monitoring
Thursday, 6 February 14
MonitoringInside
Inside
InsideInside
InsideInsideInside
Thursday, 6 February 14
Monitoring
Thursday, 6 February 14
Thursday, 6 February 14
Inside
Inside
InsideInside
InsideInsideInside
Outside
Thursday, 6 February 14
Ranging
Thursday, 6 February 14
Hyper Local ContentThursday, 6 February 14
Near
Far
low = 5m , default = 50m, high = 100mThursday, 6 February 14
Thursday, 6 February 14
Thursday, 6 February 14
From Monitoring{
identifier : “......”,regionState : “inside”
}
From Ranging
{beacons : [ {
UUID : “0000-0000-0000-0000”,major : 1,minor : 1,accuracy : 20.4,proximity : ‘near’
},{ ...}]}
Thursday, 6 February 14
Topology
Thursday, 6 February 14
UUID : “A”major : 1minor : 1
UUID : “A”major : 1minor : 2
UUID : “A”major : 1minor : 3
UUID : “B”major : 1minor : 1UUID : “A”
major : 2minor : 1
UUID : “A”major : 2minor : 2
Thursday, 6 February 14
UUID : “A”major : 1minor : 1
UUID : “A”major : 1minor : 2
UUID : “A”major : 1minor : 3
UUID : “B”major : 1minor : 1UUID : “A”
major : 2minor : 1
UUID : “A”major : 2minor : 2
Thursday, 6 February 14
On a Glimworm Beacon you can set:
UUID: “0000-0000-000-0000”major : 0 - 63335minor : 0 - 65535power : 5m / 50m / 100mInterval : 100ms, 1.2s , 2.4sPincode : 000000
Thursday, 6 February 14
Over the air configuration
Thursday, 6 February 14
USP
Thursday, 6 February 14
USP
Thursday, 6 February 14
Android
Thursday, 6 February 14
Thursday, 6 February 14
Thursday, 6 February 14
Thursday, 6 February 14
Radius Networks
Thursday, 6 February 14
Radius Networks
Thursday, 6 February 14
Thursday, 6 February 14
