Integrated Solar Street Light - oiscape.com

14
Solararia Energy Technology Co., Ltd. Integrated Solar Street Light High Efficiency Up to 180LM/W IP65 IK10 3 Years CE www.oiscape.com Copyright 2021Q1

Transcript of Integrated Solar Street Light - oiscape.com

Page 1: Integrated Solar Street Light - oiscape.com

Solararia Energy Technology Co., Ltd.

Integrated Solar Street Light

High Efficiency Up to 180LM/W

IP65 IK103

Years CE

www.oiscape.com Copyright 2021Q1

Page 2: Integrated Solar Street Light - oiscape.com

■ Overview

Solar street light in-built smart solar controller, the all in two design makes it compact and easy to installation. The solar panel and battery and controller in integrated in one part, so that no need to extend cable to the battery box. The whole light offers total freedom from electrical “main power” without request for trenching cabling or expensive labor costing. Not only our solar powered light are clean energy, eco-friendly and zero running cost, but also uncontrolled to grid power fluctuations and blackouts, ensuring perfect performance and continuity of service & safety all year round.

High efficiency solar panel takes use of monocrystalline photocells, a small panel can bring big power outputs and let the whole light have longer autonomy.

Maximum Power Point Tracking, it is the latest and most efficient solar charging technology which has 30% higher efficiency than PWM.

The NMC Lithium-ion power battery takes use of EV cells,, the energy-density is 30% higher than LiFePO4 battery.

Our battery packs design offer multi-protection technology that allows the whole battery pack to work correctly even few cells was damaged.

The motion senor detects movement within several meters of the unit and turns the LED module from ‘dim mode’ to ‘full-brightness’ mode.

The voltage of solar panel will change according to the daylight, this is used as a photosensor to control the light work automatically.

The Innovative Structure Designed with Great Originality

• Elegant Design• Each Part Modular Design• Extensible Solar Panel Wings• Easy maintenance• Quick & Easy installation• Time Control/ Dimmable / Motion Sensor Control

www.oiscape.com Copyright 2021Q1

Page 3: Integrated Solar Street Light - oiscape.com

Adjustable Mounting Angle

All in One Solar Street Light has 30°mounting angle, when it combine with rotatable led module, the solar lighting system is very flexible in installation. All brackets is aluminum annoy, so that the whole light fixture is strong but light weight.

Extendable Solar Panel

The split solar panel is extendable so that you can add it more to meet different requirements, for some area which the sunshine is not enough, it is able to add more solar panels to absorb more sun energy.

Extendable Battery Module

The battery have a super high cooling structureYou can add battery module to meet different requirements of back up time, meanwhile the battery is very easy to install and maintenance.

Double Arm Lamp Options

One integrated solar lighting system with two arm lamps. Another important features of the integrated solar street lighting system is that the lamps could be installed in two arms, in some street it lighting double roads with one pole.

Sturdy and Anti-theft Design

Two steps aluminum surface treatment – anodizing and powered coating. It is strong to stand in extremely environment. Metal mounting support makes it sturdy. The bolts takes use of anti-theft design for safety.

Product Features

www.oiscape.com Copyright 2021Q1

Page 4: Integrated Solar Street Light - oiscape.com

Dusk to Dawn Mode

The solar lamp will automatically turn on from dusk to dawn. The light will keep constant brightness in a set power in the period.

*D/N Dly: Day/Night open load delay time. (0-30min)

Five-Stage Night Mode

The lamps lighting divide into 5 stage, each stage time and dim can be setting according to demands. With diming setting, it is an efficient way to save energy, and keep the lamp working in best power and time.

Auto Turn on/off

The controller recognize day and night based on the solar panel open circuit voltage. This day/night threshold can be modified according to local solar radiation. The setting range is 3-8V, the standard setting is 5V.

Sunset Sunrise

Light Off

Light On

D/N Dly

Dusk to Dawn(D2D)

Sunset Sunrise

Light On

Light Off

D/N Dly Time 1 Time 2 Time 3 Time 4 Time 5

Sunset Sunrise

Light On

Light Off

D/N Dly Time 1 Time 2 Time 3 T0T Time 5

3-8V4-9V

Dusk Dawn

Sunset Sunrise

Working Mode

Motion Sensor Dimming

When the human body movement is detected, the solar street light will automatically adjust to full power output. When no one is moving, the light will be adjusted to dim or turn off.

www.oiscape.com Copyright 2021Q1

T0T Motion Sensor Mode

If set time 4 to T0T mode, the controller will automatically calculate lasting time of time 4 according to actual night time.

Page 5: Integrated Solar Street Light - oiscape.com

Integrated Solar Street Light

ISPL40-20W

The Integrated Solar Street Light (i.e. All in Two Solar Street Light) is integrated by the PV panel system and lamp fixture. It split the whole solar led street light into two parts -- The solar power lighting system and the led fixture. Hence it's quite easy for installation and maintenance. Compare with all in one solar street light, it is available to extend the power in a very simple way which is due to our patent design.

Finish Color Options

SilveryRAL9006

Anthracite GreyRAL7016

Matt Black(on request)

Technical Data

IP65 IK103

Years CE

Model No. ISPL40-20W

Physical Parameter

PV Module Power Mono 40Wp

Battery Capacity 11.1V 15Ah NMC Li-ion

Control Mode Motion Sensor/Timing

Outline Dimension 711*372*84mm

N.W.(kg) 9.5kg

Light Parameter

LED Module Power 20W

LED Chips Lumileds 3030

Physical lifespan 100,000 hrs

Visual Angle 80*150° (Type III)

CCT 4000/5000/6000K

Luminous Efficiency 180Lm/W

Max. Luminous Flux 3600 Lm

Full Bright Mode Lighting >9 hrs

Dim Mode Lighting(20%) >41 hrs

Environment Requirement

IP Rating IP65

Wind Load Rate 110mph

Charge Temperature 0℃ ~ 60℃

Discharge Temperature -10℃ ~ 60℃

Storage Temperature -10℃ ~ 60℃

Installation Proposal

Installation Height 4-6m

Installation Distance 10-20m

O.D. of the Pole 55-60mm

www.oiscape.com Copyright 2021Q1

Dimensions

Working Mode (Motion Sensor)

Stage Stage 1 Stage 2 Stage 3 Stage 4 Stage 5

Time 0 H 0 H 6 H 6 H 0 H

Outputs 100% 100% 100% 80% 100%

Outputs(No Sense) \ \ 20% 20% \

Page 6: Integrated Solar Street Light - oiscape.com

Integrated Solar Street Light

ISPL40-30W

The Integrated Solar Street Light (i.e. All in Two Solar Street Light) is integrated by the PV panel system and lamp fixture. It split the whole solar led street light into two parts -- The solar power lighting system and the led fixture. Hence it's quite easy for installation and maintenance. Compare with all in one solar street light, it is available to extend the power in a very simple way which is due to our patent design.

Finish Color Options

SilveryRAL9006

Anthracite GreyRAL7016

Matt Black(on request)

Technical Data

IP65 IK103

Years CE

Model No. ISPL40-30W

Physical Parameter

PV Module Power Mono 40Wp

Battery Capacity 11.1V 20Ah NMC Li-ion

Control Mode Motion Sensor/Timing

Outline Dimension 711*372*84mm

N.W.(kg) 10kg

Light Parameter

LED Module Power 30W

LED Chips Lumileds 3030

Physical lifespan 100,000 hrs

Visual Angle 80*150° (Type III)

CCT 4000/5000/6000K

Luminous Efficiency 180Lm/W

Max. Luminous Flux 5400 Lm

Full Bright Mode Lighting >8 hrs

Dim Mode Lighting(20%) >37 hrs

Environment Requirement

IP Rating IP65

Wind Load Rate 110mph

Charge Temperature 0℃ ~ 60℃

Discharge Temperature -10℃ ~ 60℃

Storage Temperature -10℃ ~ 60℃

Installation Proposal

Installation Height 4-6m

Installation Distance 10-20m

O.D. of the Pole 55-60mm

www.oiscape.com Copyright 2021Q1

Dimensions

Working Mode (Motion Sensor)

Stage Stage 1 Stage 2 Stage 3 Stage 4 Stage 5

Time 0 H 0 H 6 H 6 H 0 H

Outputs 100% 100% 100% 80% 100%

Outputs(No Sense) \ \ 20% 20% \

Page 7: Integrated Solar Street Light - oiscape.com

Integrated Solar Street Light

ISPL60-30W

The Integrated Solar Street Light (i.e. All in Two Solar Street Light) is integrated by the PV panel system and lamp fixture. It split the whole solar led street light into two parts -- The solar power lighting system and the led fixture. Hence it's quite easy for installation and maintenance. Compare with all in one solar street light, it is available to extend the power in a very simple way which is due to our patent design.

Finish Color Options

SilveryRAL9006

Anthracite GreyRAL7016

Matt Black(on request)

Technical Data

IP65 IK103

Years CE

Model No. ISPL60-30W

Physical Parameter

PV Module Power Mono 60Wp

Battery Capacity 11.1V 20Ah NMC Li-ion

Control Mode Motion Sensor/Timing

Outline Dimension 1027*372*84mm

N.W.(kg) 10kg

Light Parameter

LED Module Power 30W

LED Chips Lumileds 3030

Physical lifespan 100,000 hrs

Visual Angle 80*150° (Type III)

CCT 4000/5000/6000K

Luminous Efficiency 180Lm/W

Max. Luminous Flux 5400 Lm

Full Bright Mode Lighting >8 hrs

Dim Mode Lighting(20%) >37 hrs

Environment Requirement

IP Rating IP65

Wind Load Rate 110mph

Charge Temperature 0℃ ~ 60℃

Discharge Temperature -10℃ ~ 60℃

Storage Temperature -10℃ ~ 60℃

Installation Proposal

Installation Height 6-8m

Installation Distance 15-30m

O.D. of the Pole 55-60mm

www.oiscape.com Copyright 2021Q1

Dimensions

Working Mode (Motion Sensor)

Stage Stage 1 Stage 2 Stage 3 Stage 4 Stage 5

Time 0 H 0 H 6 H 6 H 0 H

Outputs 100% 100% 100% 80% 100%

Outputs(No Sense) \ \ 20% 20% \

Page 8: Integrated Solar Street Light - oiscape.com

Integrated Solar Street Light

ISPL60-40W

The Integrated Solar Street Light (i.e. All in Two Solar Street Light) is integrated by the PV panel system and lamp fixture. It split the whole solar led street light into two parts -- The solar power lighting system and the led fixture. Hence it's quite easy for installation and maintenance. Compare with all in one solar street light, it is available to extend the power in a very simple way which is due to our patent design.

Finish Color Options

SilveryRAL9006

Anthracite GreyRAL7016

Matt Black(on request)

Technical Data

IP65 IK103

Years CE

Model No. ISPL60-40W

Physical Parameter

PV Module Power Mono 60Wp

Battery Capacity 11.1V 30Ah NMC Li-ion

Control Mode Motion Sensor/Timing

Outline Dimension 1027*372*84mm

N.W.(kg) 12.9kg

Light Parameter

LED Module Power 30W

LED Chips Lumileds 3030

Physical lifespan 100,000 hrs

Visual Angle 80*150° (Type III)

CCT 4000/5000/6000K

Luminous Efficiency 180Lm/W

Max. Luminous Flux 7200 Lm

Full Bright Mode Lighting >11 hrs

Dim Mode Lighting(20%) >42 hrs

Environment Requirement

IP Rating IP65

Wind Load Rate 110mph

Charge Temperature 0℃ ~ 60℃

Discharge Temperature -10℃ ~ 60℃

Storage Temperature -10℃ ~ 60℃

Installation Proposal

Installation Height 6-8m

Installation Distance 15-30m

O.D. of the Pole 55-60mm

www.oiscape.com Copyright 2021Q1

Dimensions

Working Mode (Motion Sensor)

Stage Stage 1 Stage 2 Stage 3 Stage 4 Stage 5

Time 0 H 0 H 6 H 6 H 0 H

Outputs 100% 100% 100% 80% 100%

Outputs(No Sense) \ \ 20% 20% \

Page 9: Integrated Solar Street Light - oiscape.com

Integrated Solar Street Light

ISPL90-50W

The Integrated Solar Street Light (i.e. All in Two Solar Street Light) is integrated by the PV panel system and lamp fixture. It split the whole solar led street light into two parts -- The solar power lighting system and the led fixture. Hence it's quite easy for installation and maintenance. Compare with all in one solar street light, it is available to extend the power in a very simple way which is due to our patent design.

Finish Color Options

SilveryRAL9006

Anthracite GreyRAL7016

Matt Black(on request)

Technical Data

IP65 IK103

Years CE

Model No. ISPL90-50W

Physical Parameter

PV Module Power Mono 90Wp

Battery Capacity 11.1V 30Ah NMC Li-ion

Control Mode Motion Sensor/Timing

Outline Dimension 1495*372*84mm

N.W.(kg) 14.8kg

Light Parameter

LED Module Power 50W

LED Chips Lumileds 3030

Physical lifespan 100,000 hrs

Visual Angle 80*150° (Type III)

CCT 4000/5000/6000K

Luminous Efficiency 180Lm/W

Max. Luminous Flux 9000 Lm

Full Bright Mode Lighting >8 hrs

Dim Mode Lighting(20%) >37 hrs

Environment Requirement

IP Rating IP65

Wind Load Rate 110mph

Charge Temperature 0℃ ~ 60℃

Discharge Temperature -10℃ ~ 60℃

Storage Temperature -10℃ ~ 60℃

Installation Proposal

Installation Height 6-12m

Installation Distance 20-40m

O.D. of the Pole 55-60mm

www.oiscape.com Copyright 2021Q1

Working Mode (Motion Sensor)

Stage Stage 1 Stage 2 Stage 3 Stage 4 Stage 5

Time 0 H 0 H 6 H 6 H 0 H

Outputs 100% 100% 100% 80% 100%

Outputs(No Sense) \ \ 20% 20% \ Dimensions

Page 10: Integrated Solar Street Light - oiscape.com

Integrated Solar Street Light

ISPL90-60W

The Integrated Solar Street Light (i.e. All in Two Solar Street Light) is integrated by the PV panel system and lamp fixture. It split the whole solar led street light into two parts -- The solar power lighting system and the led fixture. Hence it's quite easy for installation and maintenance. Compare with all in one solar street light, it is available to extend the power in a very simple way which is due to our patent design.

Finish Color Options

SilveryRAL9006

Anthracite GreyRAL7016

Matt Black(on request)

Technical Data

IP65 IK103

Years CE

Model No. ISPL90-60W

Physical Parameter

PV Module Power Mono 90Wp

Battery Capacity 11.1V 40Ah NMC Li-ion

Control Mode Motion Sensor/Timing

Outline Dimension 1495*372*84mm

N.W.(kg) 16.7kg

Light Parameter

LED Module Power 60W

LED Chips Lumileds 3030

Physical lifespan 100,000 hrs

Visual Angle 80*150° (Type III)

CCT 4000/5000/6000K

Luminous Efficiency 180Lm/W

Max. Luminous Flux 10800 Lm

Full Bright Mode Lighting >8 hrs

Dim Mode Lighting(20%) >37 hrs

Environment Requirement

IP Rating IP65

Wind Load Rate 110mph

Charge Temperature 0℃ ~ 60℃

Discharge Temperature -10℃ ~ 60℃

Storage Temperature -10℃ ~ 60℃

Installation Proposal

Installation Height 6-12m

Installation Distance 20-40m

O.D. of the Pole 55-60mm

www.oiscape.com Copyright 2021Q1

Dimensions

Working Mode (Motion Sensor)

Stage Stage 1 Stage 2 Stage 3 Stage 4 Stage 5

Time 0 H 0 H 6 H 6 H 0 H

Outputs 100% 100% 100% 80% 100%

Outputs(No Sense) \ \ 20% 20% \

Page 11: Integrated Solar Street Light - oiscape.com

Integrated Solar Street Light

ISPL120-80W

The Integrated Solar Street Light (i.e. All in Two Solar Street Light) is integrated by the PV panel system and lamp fixture. It split the whole solar led street light into two parts -- The solar power lighting system and the led fixture. Hence it's quite easy for installation and maintenance. Compare with all in one solar street light, it is available to extend the power in a very simple way which is due to our patent design.

Finish Color Options

SilveryRAL9006

Anthracite GreyRAL7016

Matt Black(on request)

Technical Data

IP65 IK103

Years CE

Model No. ISPL120-80W

Physical Parameter

PV Module Power Mono 120Wp (60W+2*30W)

Battery Capacity 11.1V 50Ah NMC Li-ion

Control Mode Motion Sensor/Timing

Outline Dimension \

N.W.(kg) 23kg

Light Parameter

LED Module Power 2*40W

LED Chips Lumileds 3030

Physical lifespan 100,000 hrs

Visual Angle 80*150° (Type III)

CCT 4000/5000/6000K

Luminous Efficiency 167Lm/W

Max. Luminous Flux 13360 Lm

Full Bright Mode Lighting >8 hrs

Dim Mode Lighting(20%) >37 hrs

Environment Requirement

IP Rating IP65

Wind Load Rate 110mph

Charge Temperature 0℃ ~ 60℃

Discharge Temperature -10℃ ~ 60℃

Storage Temperature -10℃ ~ 60℃

Installation Proposal

Installation Height 6-14m

Installation Distance 20-40m

O.D. of the Pole 55-60mm

www.oiscape.com Copyright 2021Q1

Dimensions

Working Mode (Timing Control)

Stage Stage 1 Stage 2 Stage 3 Stage 4 Stage 5

Time 1 H 2 H 3 H 3 H 2 H

Outputs 100% 50% 20% 10% 40%

Page 12: Integrated Solar Street Light - oiscape.com

Integrated Solar Street Light

ISPL120-100W

The Integrated Solar Street Light (i.e. All in Two Solar Street Light) is integrated by the PV panel system and lamp fixture. It split the whole solar led street light into two parts -- The solar power lighting system and the led fixture. Hence it's quite easy for installation and maintenance. Compare with all in one solar street light, it is available to extend the power in a very simple way which is due to our patent design.

Finish Color Options

SilveryRAL9006

Anthracite GreyRAL7016

Matt Black(on request)

Technical Data

IP65 IK103

Years CE

Model No. ISPL120-100W

Physical Parameter

PV Module Power Mono 120Wp (60W+2*30W)

Battery Capacity 11.1V 60Ah NMC Li-ion

Control Mode Motion Sensor/Timing

Outline Dimension \

N.W.(kg) 24kg

Light Parameter

LED Module Power 2*50W

LED Chips Lumileds 3030

Physical lifespan 100,000 hrs

Visual Angle 80*150° (Type III)

CCT 4000/5000/6000K

Luminous Efficiency 167Lm/W

Max. Luminous Flux 16700 Lm

Full Bright Mode Lighting >8 hrs

Dim Mode Lighting(20%) >37 hrs

Environment Requirement

IP Rating IP65

Wind Load Rate 110mph

Charge Temperature 0℃ ~ 60℃

Discharge Temperature -10℃ ~ 60℃

Storage Temperature -10℃ ~ 60℃

Installation Proposal

Installation Height 6-14m

Installation Distance 20-40m

O.D. of the Pole 55-60mm

www.oiscape.com Copyright 2021Q1

Dimensions

Working Mode (Timing Control)

Stage Stage 1 Stage 2 Stage 3 Stage 4 Stage 5

Time 1 H 2 H 3 H 3 H 2 H

Outputs 100% 50% 20% 10% 40%

Page 13: Integrated Solar Street Light - oiscape.com

Integrated Solar Street Light

ISPL180-120W

The Integrated Solar Street Light (i.e. All in Two Solar Street Light) is integrated by the PV panel system and lamp fixture. It split the whole solar led street light into two parts -- The solar power lighting system and the led fixture. Hence it's quite easy for installation and maintenance. Compare with all in one solar street light, it is available to extend the power in a very simple way which is due to our patent design.

Finish Color Options

SilveryRAL9006

Anthracite GreyRAL7016

Matt Black(on request)

Technical Data

IP65 IK103

Years CE

Model No. ISPL180-120W

Physical Parameter

PV Module Power Mono 180Wp (3*60W)

Battery Capacity 11.1V 60Ah NMC Li-ion

Control Mode Motion Sensor/Timing

Outline Dimension \

N.W.(kg) 27kg

Light Parameter

LED Module Power 2*60W

LED Chips Lumileds 3030

Physical lifespan 100,000 hrs

Visual Angle 80*150° (Type III)

CCT 4000/5000/6000K

Luminous Efficiency 167Lm/W

Max. Luminous Flux 16700 Lm

Full Bright Mode Lighting >8 hrs

Dim Mode Lighting(20%) >37 hrs

Environment Requirement

IP Rating IP65

Wind Load Rate 110mph

Charge Temperature 0℃ ~ 60℃

Discharge Temperature -10℃ ~ 60℃

Storage Temperature -10℃ ~ 60℃

Installation Proposal

Installation Height 6-14m

Installation Distance 20-40m

O.D. of the Pole 55-60mm

www.oiscape.com Copyright 2021Q1

Dimensions

Working Mode (Timing Control)

Stage Stage 1 Stage 2 Stage 3 Stage 4 Stage 5

Time 1 H 2 H 3 H 3 H 2 H

Outputs 100% 50% 20% 10% 40%

Page 14: Integrated Solar Street Light - oiscape.com

Integrated Solar Street Light

ISPL210-150W

The Integrated Solar Street Light (i.e. All in Two Solar Street Light) is integrated by the PV panel system and lamp fixture. It split the whole solar led street light into two parts -- The solar power lighting system and the led fixture. Hence it's quite easy for installation and maintenance. Compare with all in one solar street light, it is available to extend the power in a very simple way which is due to our patent design.

Working Mode

Timing Stage 1 Stage 2 Stage 3 Stage 4 Stage 5

Outputs 100% 50% 20% 10% 40%

Time 1 hour 2 hours 3 hours 3 hours To Dawn

Finish Color Options

SilveryRAL9006

Anthracite GreyRAL7016

Matt Black(on request)

Technical Data

IP65 IK103

Years CE

Model No. ISPL210-150W

Physical Parameter

PV Module Power Mono 210Wp(90W+2*60W)

Battery Capacity 11.1V 90Ah NMC Li-ion

Control Mode Timing

Outline Dimension \

N.W.(kg) 32kg

Light Parameter

LED Module Power 2*75W

LED Chips Lumileds 3030

Physical lifespan 100,000 hrs

Visual Angle 80*150° (Type III)

CCT 4000/5000/6000K

Luminous Efficiency 167Lm/W

Max. Luminous Flux 25050 Lm

Full Bright Mode Lighting >8 hrs

Dim Mode Lighting(20%) >37 hrs

Environment Requirement

IP Rating IP65

Wind Load Rate 110mph

Charge Temperature 0℃ ~ 60℃

Discharge Temperature -10℃ ~ 60℃

Storage Temperature -10℃ ~ 60℃

Installation Proposal

Installation Height 6-12m

Installation Distance 20-40m

O.D. of the Pole 55-60mm

www.oiscape.com Copyright 2021Q1

Dimensions